Buy or Sell Your Lapping Machines

KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation. Drill spindles in ...more

SERIAL. 93382, TABLE CAPACITY. 4000#, BASE AREA. 30" X 26", LENGTH OF TABLE. 26", WIDTH OF TABLE. 26", HEIGHT OF TABLE. 6-3/4", NUMBER OF T SLOTS. 5, T SLOT DIMENSION WIDTH AT TOP. 3/4", T SLOT DEPTH. 1-1/2", T SLOT WIDTH AT BOTTOM. 1-1/2", T SLOT CENTERS. 4", SCHOCK PINS @ 90 DEGREES. YES, TABLE INDEXES ON 1 DEGREES ...more

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45 Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0, 45 Only,. Parts can be up to 1.5"; thick and up to 4"; wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be ...more

78.74” X 72.83” Capacity Radial Drill Press with #5MT, 1920 RPM, 7.5 HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table, Integrated Coolant System and Worklight, Diameter of column: 17"Distance from column surface to spindle ...more

CONQUEST - 2-46: Double Row Line Borer -- (2) Rows of (23) spindles; drilling depth up to: 2-3/8"; drills from bottom-up. -- : (2) 2 HP BALDOR Motors; 3,450 RPM spindle speed.Adjustable opening between heads from: 5-1/2" - 27" w/mechanical digital readouts. -- : (2) Pneumatic holddowns; 120" back fence with: (3) Large ...more

Used Universal Machining Center: 5-axis versatility, 12,000 RPM, CAT 40 taper. s include an 8-station pallet pool, high-speed tool changer, integrated rotary table, and more., 2020 HAAS UMC-1000SS, X. 40", Y. 25", Z. 25", # Axis. 5, Power. 30 hp, RPM. 12,000 RPM, # ATC. 51, Taper. CAT 40, Control. CNC (HAAS), 1 GB ...more

Brother Speedio U500Xd1 5-Axis CNC Drill and Tap (subject to buyer verification):TravelsX axis: 19.7″Y axis: 15.7″Z axis: 11.8″A axis [deg.]: 120 to -30C axis [deg.]: 360Distance between table top and spindle nose end: 5.7 – 17.5″TableWork area size: 10.2″Max.loading capacity: ...more

Table size- 23.6 x 11.8, Max loading capacity- 265 Lbs., Spindle speed- 16,000 R.P.M., Tapping R.P.M.- 6,000, Spindle taper- BT-30, Max tool length- 7.9, Max tool diameter- 3.1, Max tool weight- 6.6 Lbs., Chip to Chip time- 1.5 seconds, Tool to tool time-.7 seconds, X axis travel- 17.7, Y axis travel- 12.6, Z axis ...more

, Denson Model #ST-1620 Die Lifting Table and Flipper Platform, used, handles up to 20 tons. Dimensions: 3810 x 1600 x 350mm. s: 125mm cylinder diameter, 530mm stroke, 3.7kw motor output, and a 30-liter oil tank. Ideal for heavy-duty flipping tasks., Spec Sheet:, 40,000lb Denson Die/Mold Flipper Table Model ST-1620 ...more

CITIZEN L20E X (2M10) Swiss CNC Lathe - AVAIL NOWY2-AXIS on sub spindle, HP COOL, MIST, all tooling goesThe CINCOM L20 is a state of the art Swiss Turning Center manufactured by CITIZEN MACHINERY MIYANO CO LTD. It s the ALL axis Simultaneous Cincom System M7 Control (Mitsubishi Meldas 70LPC).Its standard Eight Cutting ...more

3 AXIS BLOHM MODEL PRECIMAT 306 CNC SURFACE & PROFILE GRINDER, WITH SINUMERIC / SIEMENS CONTROLS: STOCK #20696 SERIAL. 15109 MODEL. PRECIMAT 306 YEAR NEW. 2003 CATALOG (PLEASE VERIFY): Seimens Easy Touch Simatic Multi Panel CNC Control Surface, Creep Feed, & Profile Grinding Capability Grinding Range ...more

SERIAL 80252201, NEW 12/2004, MODEL FBD8025NT, Tonnage: 88 Tons Overall length bed/ram: 98.4” Ram depth stop style: CNC controlled Distance between housings: 86.6” Upacting or downacting: Upacting Backgauge range: 20” Number of gauging axis’: 3 Backgauge speed: ...more

Overview, Type: Shears-Power Squaring Hydraul. Manufacturer: GHE630 1/4 X 10' HYD SHEAR Model: GHE630 1/4 X 10' HYD SHEAR Year: 2002 Stock #: 67904 Status: For Sale, ImperialMetricsize 10' x 1/4 10' x 1/4 Max Thickness 0.25" 6.35 mm Length of Blade 10' 3 m Hyd/Mech Hyd Hyd Guifil Model GHE630 ...more

Citizen A20VII 2F7PL CNC Swiss Lathe, CAPACITY 0.75″, POWER 5 hp, RPM 8,000 RPM, # AXIS 5, SWISS, CHUCKER OR CONVERTIBLE? Swiss, LIVE BACK WORKING TOOLS? No, CONTROL CNC (FANUC 32I), DIMENSIONS 8.5′ x 5.8′ x 6′, WEIGHT 5,600 lbs, To the best of our knowledge all listed below are deemed ...more

Make: Chevalier, Model: FBL-530C, Year: 2012, Machine Location: Upon Request, Maximum Swing over Bed: 40.55″, Maximum Swing Over Cross Slide: 31.49″, Maximum Turning Diameter: 37″, Maximum Machining Length: 118.11″, X-Axis Travel: 19.29″, Z-Axis Travel: 118.11″, Spindle Nose: A2-20 ...more

Hardinge-BRIDGEPORT XR1000, Travel (X, Y, Z) 40 x 24 x 24 in, 1020 x 610 x 610mm, Table Working Surface 51.18 x 23.6 in, 1300 x 600 mm, Spindle Type CT40 BigPlus, Spindle Power 30 HP, 22.37 kW, Spindle 12,000 RPM (DDS) ), Feedrate 787 in/min, Spindle Taper No. 40, No. of Tools 30 standard; 48/60 optional, CNC Control ...more

1)Pre Owned 30” Wilton Model 2445v Drect Drive Gear Head Drill Press, CATALOG :, Swing Diameter 30", Drilling Capacity, Steel 2", Tapping Capacity, Steel 1.75", Spindle Travel, Power 10", Spindle-Nose to Table, Maximum 30.5", Spindle-Nose to Table, Minimum 2.75", Spindle-Nose to Base, Maximum 50", Spindle-Center ...more

HAAS DS-30SS CNC LATHE w/SUBSPINDLE and BARFEEDS/N:″081580… BUILT: 2012 VIDEO LINK: https://youtu.be/OS7QkQAuMRU:SWING OVER BED.″1.75"SWING OVER CROSS SLIDE. 20.75"MAXIMUM TURNING DIAMETER. 16"MAXIMUM TURNING LENGTH. 26.11"X-AXIS TRAVEL. 12.5"Z-AXIS TRAVEL. 26"SPINDLE ...more

WILTON GEARED HEAD DRILL PRESSMODEL: 2350, S/N:″406/942, NEW: 2000'S : DRILLING CAPACITY - MILD STEEL. 1-7/8"TAPPING CAPACITY - MILD STEEL. 1-9/16"DRILL SWING. 28"CENTER OF SPINDLE TO FRONT OF COLUMN. 14"SPINDLE TAPER. #4MTSPINDLE DIAMETER.″.228"SPINDLE TRAVEL. 9"COLUMN ...more

Overview, Type: Machining Centers, 5 Axis Manufacturer: SATELLITE XT 15500 Model: SATELLITE XT 15500 Year: 2014 Stock #: 55523 Status: For Sale, ImperialMetricX 610" 15,494 mm Y 43" 1,092.2 mm Z 27" 685.8 mm # Axis 5 5 RPM 24,000 RPM 24,000 RPM Weight 47000 47000 EMMEGI Satellite XT 5 Axis Mobil Gantry ...more

S:, Rigid spindle/head housing with powerful 3 HP vector drive spindle motor, 80-4500 rpm programmable spindle provides geater range of machining capability, Metal telescopicway cover on front saddle ways enhances durability, X-axis and Y-axis metal hand wheels for manual operation and set ups, Automatic lubrication ...more

Table size- 23.6 x 11.8, Max loading capacity- 265 Lbs., Spindle speed- 16,000 R.P.M., Tapping R.P.M.- 6,000, Spindle taper- BT-30, Max tool length- 7.9, Max tool diameter- 3.1, Max tool weight- 6.6 Lbs., Chip to Chip time- 1.5 seconds, Tool to tool time-.7 seconds, X axis travel- 17.7, Y axis travel- 12.6, Z axis ...more

DN Solutions VM-960L Heavy-Duty CNC MillCNC Vertical Machining Center (subject to buyer verification):TABLE-L: 102.3″TABLE-W: 37.4″WEIGHT ON TABLE: 9,920 lbSPINDLE NOSE TO TABLE TOP: 7.9″ – 39.4″X – AXIS TRAVEL: 94.4″Y – AXIS TRAVEL: 37.8″Z – AXIS TRAVEL: ...more

, Sandvik CoroMill 210 R210-086C8-14H face mill cutter available. Used condition. Max 14700 RPM, 2.4409" cutting diameter, 10 edge angle, 6 cutting items, clamp with screw, ideal for professional tooling needs., Spec Sheet:, SANDVIK CoroMill 210 Face Mill Cutter R210-086C8-14H, USED, MAX 14700 rpm, Part Number: ...more

SWING OVER BED ------------------------- 16 in, SWING OVER CROSS SLIDE ----------------- 10 in, THROUGH HOLE --------------------------- 1 3/4 in, SPINDLE SPEED (NUMBER) ----------------- 24, SPINDLE SPEED (RANGE) ------------------ 16-1,010, CROSS SLIDE TRAVEL --------------------- 80 in, TAILSTOCK BARREL DIAMETER ...more

3/4” THICK X 5FT WIDE BELT WITH IMPACT IDLERS, FEEDER BELT CONVEYOR, FALK GEARBOX REDUCER, JOY TROUGHING RUBBER IMPACT IDLERS, 10,SDX,7.25”, RU,60BW, 20,S, WBG, TROUGHING METAL CARRYING IDLER., HEAD PULLEY WITH RUBBER LAGGING, PPI TAIL PULLEY SERIAL # 382-979-001, PRECISION PULLY & IDLER: TAIL PULLEY ...more

The 2024 Chen Hsong SM700-TP-SVP/2 (D2) 770 Ton Injection Molder is built for high-tonnage, precision plastic molding of large, deep-cavity parts. Ideal for automotive components such as bumpers, dashboards, and door panels, as well as logistics pallets and appliance housings. Designed for rigidity, sealing ...more

SKU: 133794, Model: 73.40, Year: 2006, Condition: Used, S/N: 46/2, Capacity: 12 GA, Electrical :, Voltage: 400 volts, Phase: 3-phase, Dimensions: 67.00 (H) x 50.00 (W) x 103.00 (L) inches, Additional :, Max Thickness: 2.5 mm 12GA, Max. width of steel formed: 159" // 4060 mm, Min Flange Height: 6X Sheet Thickness ...more

2016 John Deere 624K Wheel Loaders, Quantity: 3 Units, Make: John DeereModel: 624KType: Wheel LoaderYear: 2016Hours: Unit 1: 11,658Unit 2: 11,701Unit 3: 11,846Condition: Used, Reported in Good ConditionFuel: Diesel 60in ForksROPS EquippedAll Wheel DriveQuick CouplersTires: Unit 1: 17.5x25, 90% TreadUnit 2: 17.5x25 ...more

ORDER 220, 9.84" STROKE 4.33" POWER RAM ADJUSTMENT 17.72" SHUTHEIGHT 25-50 SPM 34.6" X 25.6" RAM 54.7" X 33.1" BED AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES PALM BUTTONS HYDRAULIC OVERLOAD 2013 HYDRAULIC DIE CLAMPING 20 HP 230/460/60/3 72" X 96" X 144" T APROX. 44,100 LBS APROX..

ORDER 220, 9.84" STROKE 4.33" POWER RAM ADJUSTMENT 17.72" SHUTHEIGHT 25-50 SPM 34.6" X 25.6" RAM 54.7" X 33.1" BED AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES PALM BUTTONS HYDRAULIC OVERLOAD 2013 HYDRAULIC DIE CLAMPING 20 HP 230/460/60/3 72" X 96" X 144" T APROX. 44,100 LBS APROX..

TSB 25TSB 35 Working Area Drilling capacity 0.98 in 1.38 in Tapping capacity, steel M 16 M 22 Foot set up area (length x width) 12x13 in 15x14 in Vertical head travel 19 in 20 in Spindle nose-to-foot distance 26 in 25 in Throat 9 in 13 in Column diameter 4 in 5 in Headstock Spindle speed (6) 125 - 2,825 rpm (12) 125 - ...more

33 Tons59"x98" (w/o repo) 3.5"98" + Repositioning3149.61 IPM59"3149.61 IPM20 RPM65 RPM+/-.002+/-.0043 Sec440 #1.25"2645#25kVA218"x197"x88"H41,000#.

SKU: 120554, Model: TM 1300/750, Year: 2000, Condition: Used, S/N: 56707, Electrical :, Voltage: 230 volts, Phase: 3-phase, Tons: 130 ton, Dimensions: 85.00 (H) x 60.00 (W) x 200.00 (L) inches, Additional :, Ball screw diameter: 1.77", Tie bar spacing: 18.1" Tie Bar Spacing (Horizontal), Tie bar spacing ...more

PRIMA POWER EBe3820 EXPRESS BENDER, PANEL BENDING SYSTEM WITH LOAD/UNLOAD, NEW: 2019, MAX. BENDING LENGTH: 149.6", MAX. SHEET LENGTH: 157.5", MAX. SHEET WIDTH: 67", MAX. PANEL DIAGONAL: 157.5", MAX. BEND HEIGHT: 8.03", MAX. RE-ENTERING BEND: 2.165", MAX. BENDING FORCE: 45 TONS, CLAMPING FORCE: 121 TONS, MAX. MATERIAL ...more

EquipmentBeam / Drill Lines2017 Ficep Excalibur M1201DE CNC SingleSpindle Traveling Column Beam Drill Line2017 Ficep Excalibur M1201DE CNC SingleSpindle Traveling Column Beam Drill LineHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell ...more

CAPACITY:, Maximum Cutting Capacity (Squares) …. 20.5″, Maximum Cutting Capacity (Rounds) …. 222″, Maximum Cutting Capacit (Rectangle) … 20.5″ x 30″, Saw Blade ………………………. 2″ x 21’10” x 0.063″ ...more

CAPACITY:, Maximum Cutting Capacity (Squares): 20.5", Maximum Cutting Capacity (Rounds): 22", Maximum Cutting Capacit (Rectangle): 20.5" x 30", Saw Blade: 2" x 21'10" x 0.063", Cutting Speeds: 42-312 FPM, Blade Motor (380 Volts): 10 HP, Floor Space: 132" x 56" x 94", Shipping Weight (Saw Only): 5,620 Lbs., PLC ...more

UNIMAK - PW 35 W6-PA + Brush System,.Profile Wrapper for PUR or EVA Glue and PRIMING Unit, Complete with brackets for VALCO MELTON 350 mm Adjustable Slot Die (slot die not included). This machine can wrap any wood, PVC or aluminum profiles.UNIMAK is quickly becoming the leader in Profile Wrapping Machinery with high ...more

Spindle Size: 96" x 120", Base Size: 96" x 96", Table Height Overall: 24", Number Of T-Slots: 8, Width Of T-Slots Top: 1.25", Width Of T-Slots Bottom: 2-1/8", Depth Of T-Slots: 2.5", Distance Between T-Slot Centers: 12", Maximum Load Capacity: 75,000 LBS, 360 Degree Scale Increments: 1-Degree, Approximate Shipping ...more

Make: Great Dane, Model: CS1, Year: 2022, Machine Location: Pennsylvania, 2022 Great Dane CS1 Champion 53′ composite dry van trailer featuring air ride suspension, swing rear doors, tandem axles, wood floor, and a lightweight composite sidewall design ideal for freight, logistics, and fleet use., Item, Year ...more

- Sturdy stress-free steel frame construction, - Steel bar side pressure beam construction with solid platen surface, - Continuous left-side counter pressure surface and solid floor, - Motorized adjustment of the pressure beam by precision trapezoidal-threaded spindles (for optimal lead and concentric accuracy), heavy ...more

INDEX MS22-8, Mfd. 2024, 2 NCU, (4) Y-Axis, SL Control, Cutting hours: 1,000, Turnkey Available, Located in Europe, 4-Meter IEMCA SIR MS22-8/43/P, Rack loader 50 Hz D9-13-19-25, Bar length 4300 mm, with drilling unit and minimum quantity lubrication unit, additional end-of-bar sensor, Bar stock 500mm (D12-D24), Bar ...more

CNC Vertical Machining Center, Manufacturer: Southwestern Industries, Inc., Model: TRAK TMC7, S/N: On Request, Date of Manufacture: 08 / 2021, Electrics: 208 Volt, 3 Phase, 60 Hz, 67.3 Amps, Main Motor: 10/15 HP, s and :,.ProtoTRAK/RMX CNC Control,.Table Size: 35.43" x 19.69",.Max. WP Weight: 1,000 ...more

2015 CHIRON FZ12 FX, X-Axis. 21.65", Y-Axis. 15.75", Z-Axis. 16.54", A-axis. 120, # Axis. 5, Spindle Motor. 53.6 hp, Spindle Speed. 24,000 RPM, ATC Capacity. 48, Taper. HSK-A 50, Table Size. 11.81" x 15.75", Table Load Capacity. 11.02 lb, Cut Hours. 10,300 hr., FANUC 31i-B5 CNC Control, 2-Axis Rotary Table CHIRON CASD ...more

5'13" CARLTON RADIAL DRILL, Serial No 3A3878, Model 3A, 5'13" CARLTON RADIAL DRILL, Serial No 3A3878, Model 3A, 62" x 36" x 20" Plain T-Slotted Box Table, Tapping Capabilities, Plain-Type Base, Power Arm Elevation, Power Clamping to Arm, Column, & Head, Coolant System (Built-In), CATALOG :, Arm Length. ...more

EquipmentStructural Steel Processing LinesBeam Drill / Saw Lines2015 Voortman V630 Three-Axis Beam Drill2015 Voortman V630 Three-Axis Beam DrillHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Beam Drill / Saw ...more

5'15" AMERICAN RADIAL DRILL, Serial No. 77-570, 5'15" AMERICAN RADIAL DRILL, Serial No. 77-570, 36" Diameter Work Table, Tapping Capabilities - Plain Base, (32) Spindle Speeds, Power Column Clamping, Power Rapid Traverse To Head, Coolant System, CATALOG :, Arm Length 5', Column Diameter 15", Spindle Taper ...more

, SPINDLE HOLE DIAMETER 1.2205", MAIN SPINDLE INDEXING Full C, SUB-SPINDLE INDEXING Full C, LIVE BACK WORKING TOOLS No, B-AXIS? No, CONTROL MAIN SPINDLE INDEXING Full C, SUB-SPINDLE INDEXING Full C, LIVE BACK WORKING TOOLS No, B-AXIS? No, Machine Diameter: 3/4" (20 mm), Machine Length: 6 1/2" (165 mm), Front Drilling ...more

Make: Hyundai Kia, Model: HS400I, Year: 2010, Machine Location: California, Pallet Size: 15.75″ x 15.75″ (400 mm), X-Axis Travel: 25.2″, Y-Axis Travel: 22″, Z-Axis Travel: 25.6″, B-Axis: 1° Indexing, Spindle Speed: 12,000 RPM, Spindle Power: 33.5 HP, Spindle Taper: CAT 40, Automatic ...more