Buy or Sell Your Lapping Machines

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Cincom 6 Axis CNC Control, Long Parts Capable ...more

, X-Axis 94.5", Y-Axis 31.5", Z-Axis 31.5", Table Size 110.24" x 40.16", Spindle Speed 5000 RPM, Spindle Taper CAT 50, Spindle Motor 25 HP, Tools 36, Table Load Capacity 11,023 lbs., Max Tool Diameter 4.72" / 9.44", Max Tool Length 13.8", Max Tool Weight 66 lbs., Machine Weight 60,000 lbs., s:, MORIC MSX-501III (Fanuc ...more

Erbend 10′ x 11 Gauge CNC Servo Combi Folder, MFA 3230, Inventory # 9703, Model: MFA 3230, Made in Turkey, Max. Sheet Length: 125.98″ (3,200mm), Capacity:, Mild Steel: 11 Gauge (3mm), Stainless Steel: 14 Gauge (2mm), Aluminum: 9 Gauge (4mm), Clamping Beam (Z-Axis, Dual Servo):, Open Height, No Tools: ...more

RITTER R-300 V Door and Panel Clamp6' x 12' Assembly Easel - VerticalStandard s: -- (10) Universal Clamping Cylinders and Cylinder Manifold. -- Foot Treadle operated. -- (4) Material Hold-Down Dogs. -- (3) Adjustable Material Positioning Stops. -- (2) Squaring Bars on Left and Right Sides. -- 2" Cylinder ...more

14 GA (mild steel); 18 GA (stainless steel); 10 GA (soft aluminum)26 GA (mild steel)6"120" 0 - 135 degrees1"1/2"Standard1 9/16"3,250 lbs.159 x 32 x 77"H.

used- evoqua water technologies j-press, model 800g32-29-15sylw. 313 sq. ft. total filtration area. 15 cubic feet total volume. (29) 800mm gasketed co-polypropylene plates, 32mm cake thickness. 100 psi maximum feed pressure. 3700 psi hydraulic clamping pressure. plate shifter; sidebar press. 1-1/2" diameter 4-corner ...more

SERIAL.: 497234, MODEL.: HBP310/403G, CAPACITY ROUND 90 DEG.: 12.2", CAPACITY RECTANGLE 90 DEG.: 15.7" X 12.2", CAPACITY ROUND 45 DEG RIGHT.: 10.6", CAPACITY RECTANGLE 45DEG LEFT.: 13.7" X 12.2", CAPACITY RECTANGLE 45DEG RIGHT.: 10.6" X 12.2", MITER RANGE MAX LEFT.: 30 DEG, MITER RANGLE MAX RIGHT.: 45 DEG, CUTTING ...more

Reis 100 Ton Hydraulic Spotting Press, Model TUS-160S-100, Asset # 17431, Serial # 03.189.00, Daylight Between Columns 63.78″, Daylight 90.55″, Clamping Surface 86.6″ x 61″, T Slot Dimensions, 25.59″ x.866″, Ram Force 100 Tons, Retraction Force 45 Tons, Swivel Platen Capacity 6 ...more

Bezner RF-160 Log Rounding Machine, Make: BeznerModel: RF-160-380-6MKYear: 2002Condition: Used Condition Single Cutter Head: Includes Spare Cutters and DiesCutter Head Drive: Electric Motor Power Output: 100HPVoltage: 460 VoltFrequency: 60 HZLog Feed Drive: SEW-Eurodrive Reduction Drive Motor Power Output: 5HP ...more

SERIAL. 070353001, MODEL. C360SA, YEAR NEW. 2007, MITERING CAPACITY LEFT & RIGHT. 45 & 60 DEGRESS, CAPACITY ROUND. 4-1/2", CAPACITY SQUARE. 4", CAPACITY RECTANGLES. 4" X 7", CAPACITY ROUNDS @ 45 DEGREES LEFT. 4", CAPACITY ROUNDS @ 45 DEGREES RIGHT. 4-1/2", CAPACITY SQUARE AT 45 DEGREES. 4"LEFT OR RIGHT ...more

CAPACITY:, Tonnage Capacity: 175 Tons, Throat Depth: 30", Maximum Plate Size: 30" X 60", Maximum Material Weight: 800 Lbs., Maximum Material Thickness: 1-1/2", Maximum Hole Size: 2-5/16", Maximum Angle Capacity: 8" X 8" X 1-1/8", Minimum Angle Capacity: 2-1/2" X 2-1/2" X 1/8", Maximum Punch Stroke: 2", Material ...more

Tamrock EJC 210 6-Yard Scooptram, Make: TamrockModel: EJC 210Type: ScooptramCapacity: 6.0 Yards (4.6m³)Payload: 9,500 Kg (21,000 Lbs.)Condition: Used, Reported in Good ConditionDiesel Engine: Detroit S50Brake System: LCBPowertrain: ClarkElectrical System: 24 VoltTires: 17.5-25, View Spec Sheet Below, Model : ...more

2012 TSUGAMI S206 Swiss Type Automatic Screw Machine with Fanuc 31iTB control. s 8 controllable axes, max bar diameter 20mm, rotary guide bushing, and live tools. bar loader, mist collector, fire suppression, and more., Control: Fanuc 31iTB, No. of Controllable Axes: 8, (X1, Z1, Y1, X2, Y2, Z2, C1, C2), Max Bar ...more

UNIMAK PW 20 W4-P,.Profile Wrapper for PUR® Glue with Slot Die Head and a PRIMING station for window components. UNIMAK is quickly becoming the leader in Profile Wrapping Machinery with high quality, economically priced machinery.The PW 20 F4-P is a very well equipped (4) meter (13') long machine with: ...more

2006 OCEAN AVENGER II 1000/1B Beam/Drill Line. Efficiently boosts throughput and reduces labor costs with its versatile design. Processes beams, angles, pipes, and more. Compact space-saving design, ideal for steel fabrication., Brand: Ocean / Peddinghaus, Model: Avenger II, The Ocean Avenger Beam Drill Line was ...more

Make: C.R. Onsrud, Model: F98HM75, Year: 2023, Machine Location: Upon Request, X Table Size: X 60″, X Table Size: Y 48″, U Table Size: X 60″, U Table Size: Y 48″, Z Stroke: 41″, Spindle Taper: HSK-A63, Spindle Motor: 75 HP, Spindle Speed: 24,000 RPM, Tool Changer: 24 Stations, Machine ...more

Doosan MV 8035 Vertical Machining Center 2007, Axis X: 78.7″, Axis Y: 37.79″, Axis Z: 31.49″, Table length: 94.5″, Table width: 35.4″, Max. part weight: 8800 lbs, Number of tool pockets: 30, Spindle taper: 50, Max. spindle speed: 6000 rpm, Spindle motor power: 40 HPW, Dimensions: ...more

CAM-WOOD TX-P3200PL Sliding Table Saw w/Motorized Raise/Lower/Tilt & Programmable Rip FenceHeavy-duty construction, vibration-free operation. Easy to set up and quickly adjusts. High accuracy, free movement sliding table without wear resistance.Specially designed double rollers carriage made by aluminum profile. ...more

2023 Multipower L.A.D. Geotechnical Drill, Make: Multi-Power ProductsModel: L.A.D. Type: Track-Mounted Limited-Access Geotechnical and Environmental DrillYear: 2023Hours: 227 Hours on MeterCondition: Used ConditionApplications: Drilling Auger (Hollow and Solid Stem)RAB and RC (Rotary Air Blast and Reverse ...more

Phoenix Contact PT 2,5-QUATTRO push-in terminal blocks, offered here as a factory box of 50 pieces, order number 3209578, manufactured in Germany on 2020-05-15. These are four-conductor push-in connection terminal blocks rated for 600V 20A maximum and 550V 20A maximum per UL, accepting 26 to 12 AWG copper conductors ...more

EJC 245 6-Yard Scooptram, Make: Eimco Jarvis Clark (EJC)Model: EJC 245Year: 2002Hours: 3,500 HoursCondition: Used, Reported in Operating ConditionBucket Condition: 6yd³Engine: Detroit Diesel 50 Series Diesel EngineROPS Canopy, Model : Capacities: Tramming Capacity: 11,110kg (24,500lbs)Break Out Force, Lift: 97kN ...more

2015 Haas VM-3 4-Axis CNC Vertical Machining Center Stock # 7385, X Axis Travel: 40", Y Axis Travel: 26", Z Axis Travel: 25", Rapid Rate X Axis: 710 IPM, Rapid Rate Y Axis: 710 IPM, Rapid Rate Z Axis: 710 IPM, Table Size: 54 x 25, Max Table Load: 4,000 LBS, Spindle Motor: 30.00 HP, Spindle Speed: 12,000 RPM, Spindle ...more

WILTON 2475 33” Drill Press Power Downfeed HD Base, WILTON 2475 33” Drill Press Power Downfeed HD Base #6895, Reference #6895, Model # 2475, Serial # 591/2304, Drilling capacity- 2-3/4” mild steel, Tapping capacity- 2-1/8” mild steel, Throat- 16-1/2”, Drills to center- 33”, Spindle ...more

Wilton 33″ Direct Drive Round Column Drill Press with Mechanical Clutch, Inventory # 7938, Model: 2380, S/n: 1487, Capacity: 33″, Spindle to Column: 16 1/2″, Cast Iron Drilling Capacity: 2 7/8″, Steel Drilling Capacity: 2 3/4″, Cast Iron Tapping Capacity: 2 1/8″, Quill Diameter: ...more

, Travels: X-30", Y-26", Z-26", 35 H.P. Spindle, 10,000 RPM, 60 ATC, Cat 50 Taper Tooling, 2-19.7" x 24.8" Pallets (630 x 500 mm), Cutting Feeds: 0.04 to 591 IPM, Rapid Traverse X,Y,Z. 1,575 IPM, Approx Machine Weight. 25,300 lbs, Approx Machine Dimensions.225" x 122" x 124" ...more

Used 2012 Citizen A20VII CNC Swiss Lathe for sale. 0.75" (20mm) Capacity with 6 Turning Tools, 4 Rotary Tools, Full C-Axis, Sub-Spindle & Independent Back Working. Fanuc 32i CNC Control, Mist Collector, High Pressure Coolant System, Magazine Bar Feed., Inspect this machine always an option for our customers. This ...more

OKK VM7 III, a 2004 vertical machining center, s X/Y/Z travel of 60.24"/29.13"/25.98", 13000 RPM spindle speed, #50 taper, 20 HP main motor, and 30-tool automatic changer. Ideal for precise, reliable manufacturing., 2004 OKK VM7 III, Number Of Tables / Pallets. 1, Table-L. 65", Table-W. 30", Weight on Table. 3,300 lb ...more

CHEVALIER 520D Capacity, Swing Over Bed:. 40.50", Swing Over Cross Slide. 31.49", Maximum Turning Diameter:. 37", Maximum Turning Length. 78", Distance between Centers. 78", Headstock, Spindle Nose. A2-20, Through Spindle Hole Diameter. 15" (D), Spindle Speeds. 500 rpm, Spindle Motor. 60 HP, Transmission. D model: ...more

Used 2004 HERMLE C40U dynamic Full 5-Axis Simultaneous Gantry Style VMC:, May be inspected in plant under power by appointment, HEIDENHAIN iTNC 530 CNC Control with hand-held electronic handwheel, TECHNICAL DATA:, X-Axis. 33.5" (850 mm), Y-Axis. 27.6" (700 mm), Z-Axis. 19.7" (500 mm), Spindle speed range. 20-28,000 ...more

TYLER - 2400: Slat-Wall Machine -- Produces T-slots "Slat-Wall" for architectural/store fixture panels.48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 1/2" to 1-1/2". Machine capable of processing up to (40) panels/Hr; depending on material density, thickness, and the slot profile. -- :Machine is ...more

Longitudial Travel 18 inches Cross Travel 11 inches Vertical Travel 9 inches Fixed Vertical Adjustment 4 inches Total Vertical Movement 13 inches Work Table Clamping Area 31.5" x 4.5" Max. Center Distance 18 inches Max. Grinding Diameter 10.25 inches Taper for Workhead ISO-50 Grinding Motor Output 2 HP Grinding Motor ...more

SERIAL. 969906, MODEL. CYCLONE A-4, YEAR NEW. 2006, CAPACITY RECTANGLES @ 90 DEGREES. 22" W X 16" H, CAPACITY RECTANGLES @ 45 DEGREES. 15" X 16", CAPACITY ROUNDS. 16", MITERING. 0 TO 60 DEGREES, BAR FEED STROKE. 0" TO 24", MULTIPLE INDEXING. 4, BLADE SPEEDS. 60 TO 300 FPM, PART COUNTER. YES, BLADE DIMENSION. 16' X ...more

(1) TSUGAMI SS32 Swiss Type CNC Lathe (used) New 2008 w/Iemca MiniBoss 332-E magazine bar loader, Y-axis sub spindle, ran oil, mist collector, part conveyor, patrol light, high pressure coolant system, misc tooling, chucker capable, opposed gang tool., PRECISION TSUGAMI - CNC Precision Automatic Lathe, SUPER SWISSTURN ...more

The DMU60 eVo Linear is a powerhouse of both speed and accuracy in 5-, axis milling, configured this cell with DMGs FD function, a, 1,200rpm Vertical Turning C-Axis for true mill/turn capability and 24, Schunk Vero-S precision-balanced pallets., 24-Pallet Lights Out Automation Cell PH300, Travels: 23.6/19.6/19.6, NC ...more

, Explore precision with the Sandvik Coromant A12S-SCLCL 3 CoroTurn 107 boring bar. This used model s a 3/4" cylindrical shank with left-hand cutting direction, suitable for a minimum bore diameter of 0.9291 inch and a functional length of 10 inches., Spec Sheet:, Sandvik Coromant A12S-SCLCL 3 CoroTurn 107 Boring Bar ...more

Base Dimensions 17.7" x 25.5" Base Size 17.7" x 25.5" Column Diameter 4 inches Distance Column to Spindle 26.5 inches Drilling Capacity Cast Iron 1.25 inches Drilling Capacity Mild Steel 1.125 inches Drills to Center of Circle 10 inches Inverter Type / Power Source 2HP/115V/1PH Motor Amps 4.6 Motor (HP) 1.5HP, 230V ...more

Max part cutting diameter 2.36" Wheel diameter max 65 mm Wheel width 140 mm Modul max 3 mm Clamping length 320 mm Swivel angel max +45°/-115° X-Way 80 mm Y-Way 100 mm Z-Way220 mm Milling speed infinitely variable 300-5000 U/min Workpiece spindle variable 0-3000 U/min Total power requirement 12 kW Machine ...more

TSUGAMI S206 CNC SWISS TYPE LATHENEW: 2011 VIDEO LINK: https://youtu.be/5qGii_W19_A?si=i9fsk2hYmBOnj6pQ from Brochure: Control: Fanuc″1iTBNo. of Controllable Axes: 8(X1, Z1, Y1, X2, Y2, Z2, C1, C2)Max Bar Diameter: 20mm (3/4")Max Machining Length: 210mm (Direct Drive Rotary GB)250 (Static Guide Bushing)80mm ...more

DECKEL MAHO DMC 63V CNC MILLING MACHINE, WORKING RANGE:, LONGITUDINAL STROKE X-AXIS 630 MM, CROSS STROKE Y AXIS 500 MM, VERTICAL STROKE Z AXIS 500 MM, CLAMPING SURFACE 800 X 500 MM, TABLE LOAD APPROX. 500 KG, DISTANCE TABLE - SPINDLE MIN / MAX. 150 / 650 MM, TOOL HOLDER SK 40, SPINDLE SPEEDS STFL. 8,000 RPM, FEEDS X / ...more

Volvo L90H Wheel Loader: ● Static tipping load at full turn: 22,265 lbs ● Bucket capacity: 2.9 - 9.2 yd ● Log grapples: 1.6 - 2.9 yd ● Operating weight: 31,968 - 38,140 lbs ● Breakout force: 31,470 LBF ● Engine: Volvo D6J ● Max power: 1,400 - 1,900 RPM, ISO: 14,396 gross, 184 HP ...more

30 ton Transfer Press, Upside down shell press, 11 stations, 105mm stroke of press, Variable speed 40-100 PPM, Max blank 80mm, zig-zag, positive clamping for transfer, not springs, with part detection in clamp for all stations, strippers and kickoffs on all stations, Video available, Imported from Deuseldorf Germany ...more

MAZAK FH5800 Machining Centers, Horizontal, PALLET SIZE…………………… 19.7″ x 19.7″, NUMBER OF PALLETS……………… 2, MAXIMUM TABLE LOAD……………. 2,205 LBS, X AXIS ...more

FANUC ROBODRILL ALPHA-T21IFL CNC VERTICAL MACHINING CENTER 2008, 5 Machines available……., Type of CNC Control Fanuc 31i CNC Control, # Axis 3, Table Working Surface 33.46" x 16.1", Table Load Capacity 660 LBS, X-Axis (Longitudinal Travel) 27.55", Y-Axis (Cross Travel) 15.74", Z-Axis (Vertical Travel) ...more

Year: 2005, Model: Makino A51, Control: Makino Pro 3 (Fanuc 16i/18i), Monitor: 10.4″ Color, Spindle Speed: 12,000 RPM, Spindle Taper: CAT-40, X-Axis Travel: 22.0″ (560mm), Y-Axis Travel: 22.0″ (560mm), Z-Axis Travel: 19.7″ (500mm), Rapid Traverse: 1,969 IPM, Cutting Feed Rate: 1,574 IPM, Pallet ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Capacity:, Max Turning Diameter: 0.472" (12 mm) ...more

, Pallet of Misc: Length: 36.00" Width: 48.00" Height: 48.00", Machine Travels (X/Y/Z): 21.7" x 15.7" x 16.3", Number of Pallets: (2), Pallet Change Style: 180 Degree Rotational Index Style, Pallet Size: (2) 23.5" x 16.7", Spindle Taper: BT-30, Spindle Speeds: 16-16,000 RPM, Spindle Drive: 10 HP (Continuous), Rapid ...more

*Approximately 7,868 Spindle Run hours total, over the life of the machine*, HIGHLIGHTS:, -NEW DMG Design: DMG ERGOline Control, 19" display, DMG LIGHTline, -Optimum space economy: Excellent accessibility to the work area, good chip disposal and steeply slanted walls, large working area in relation to small machine ...more

Normal wear from use. Will need some work to make it A1again, Great opportunity to get a great machine for UNDER 10k!, Sold as is, FREE LOADING on your vehicle. Best logistics to get it to you but warranted against all latent defects., Full below., (Discount: Call for a discount, of the day, depends on YOU., AND our ...more

Spec, Max Thickness (gauge): 14 gauge, Overall Length: 20′, Weight: 15,000 lbs, Max Thickness Admissible: 2 mm St40 / 2.6 mm Aluminum / 1.25 mm Stainless Steel Working Length: 6030 mm Number of Arms: 10 Max Cut Capacity: Specified for St40 Backgauge Range (Max–Min): 1110 mm 5 mm Standard Backgauge ...more