go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Flangers

warning
13 Results

1/4" Blue Valley #3, flanger, hydraulic vert/horiz flange roll adj., pnuematic center holddown

Yoder Machinery Sales | Holland, OH
Category: Flangers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Blue Valley
Model: 3
SERIAL. 761, MODEL. #3, CAPACITY. 1/4" MILD STEEL, CAPACITY STAINLESS STEEL. 60 PERCENT OF 1/4", WORKING DIAMETER. 20" MIN, 12' MAX, VERTICAL ADJUSTMENT OF FLANGING ROLL. HYDRAULIC, HORIZONTAL ADJUSTMENT OF FLANGING ROLL. HYDRAULIC, ALL STEEL WELDED CONSTRUCTION. YES, PNUEMATIC CENTER HOLDOWN. YES, SIDE GUIDE ...more

5/16" x 10' Akyapak #BMB8X3000, hydraulic clamp, 45 HP, others sizes available, new

Raco Machinery Inc | Crystal Lake, IL
Category: Flangers
Seller: Raco Machinery Inc
Location: Crystal Lake, IL
Mfr: Akyapak
Model: BMB8X3000
(NEW).315" AKYAPAK BMB 8X3000 FLANGING MACHINE WITH CENTER HOLE VERSION, MAX. PLATE THICKNESS (YIELD POINT 36,000 PSI).315", MAX. PLATE THICKNESS (YIELD POINT 50,000 PSI).250", MIN. PLATE THICKNESS ----------------------.120", MAX. PLATE DIAMETER ----------------------- 10', MIN. FLANGING DIAMETER -------------------- ...more

5/16" x 78" Bendmak #FMB8X2000, Flanging Machine, control panel, automatic flanging mode, variable speed

Southern Fabricating Mchy Sales | Lithia, FL
Category: Flangers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: FMB8X2000
5/16" X 78" Flanging Machine with Control Panel Placed on Machine, Automatic Flanging Mode, Variable Speed of Rotation for Knuckle Roll and All Hydraulic Control, Max Thickness (280 MPa): 5/16", Max Thickness (360 MPa): ¼", Max Flat Plate Diameter: 78", Min Flanging Diameter: 59" ...more

1/2" x 13' Bendmak #FMB-15-4000-MM, hydraulic flanger, 220 V., 3-phase

FMI Trading LLC | Vinton, TX
Category: Flangers
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Bendmak
Model: FMB-15-4000-MM
Product Information, Various Type:Hydraulic Voltage / Phase:220 | 3 Phase Weight:6,300 lb Dimensions:40" x 134" x 80" Capacity:13' x 1/2", Product Code: 03040137158 Make: Bendmak Model: FMB 15 4000 MM Serial Number: BMB-033 Condition: New.

1/2" x 13' Bendmak #FMB-15X4000, Flanger, controls, Heat Treated Dies, Hydraulic Support Rolls, new

Southern Fabricating Mchy Sales | Lithia, FL
Category: Flangers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: FMB-15X4000
13’ X ½" Head Flanger with Bendmak Controls, Heat Treated Dies and Hydraulic Support Rolls., Max Thickness for ST-37: ½", Max Thickness for ST-52: 5/16", Max. Head Diameter: 157-½", Min. Head Diameter: 15-¾", Max. Knuckle Radius: 4", Max Straight Flange Height: ...more

Get email updates for newly added Flangers

5/8" x 20' Blue Valley #5, VFD, new guide rolls, main cylinder rebuilt, air cylinder new seals

N S Machine Corp. | Granger, IA
Category: Flangers
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Blue Valley
Model: 5
, Manufacturer: Blue Valley, Model: 5, Stock Number: 13854, s:, Lenze variable frequency drive, New guide rolls, Main hydraulic bend cylinder rebuilt with new seals, Air clamping cylinder rebuilt with new seals, (1) Drive tooling, Capacity, carbon steel - 5/8", Capacity, stainless steel - 7/16", Diameter, flat head - ...more

5/8" x 20' Blue Valley #5, flanger, 3" knuckle radius, 1/2" radius, 4.5" drive shaft, 10 HP

National Machinery Exchange | Newark, NJ
Category: Flangers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Blue Valley
Model: 5
5/8" X 20' BLUE VALLEY NO. 5 FLANGER, CAPACITY, CARBON STEEL 5/8", CAPACITY, STAINLESS STEEL 7/16", DIAMETER, FLAT HEAD 26" TO 240", MAXIMUM KNUCKLE RADIUS 3", RADIUS 1/2", OUTSIDE WIDTH OF SIDE FRAMES 18.5", DIAMETER OF DRIVE SHAFT 4.5", MOTOR 10 HP, VOLTS 220 / 440, PHASE 3, CYCLES 60, AMPS 26/13, APPROXIMATE ...more

1" x 168" Blue Valley #10, tooling up to 16", tracing attachment, tool loader, excellent (vidoe available)

N S Machine Corp. | Granger, IA
Category: Flangers
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Blue Valley
Model: 10
Year: 2006
, Manufacturer: Blue Valley, Model Number: 10, Serial Number: 10-410, Model Year: 2010, Stock Number: 13919, s:, Excellent running condition (Video available), Miscellaneous tooling (up to 16" radius), Tracing attachment, Tool loader, Thickness capacity, carbon steel 1" / 25 mm, Thickness capacity, stainless steel ...more

1" x 196.8" (25mm x 5000mm) SBFM #FCC-BSMD-C5025, hydraulic centerless automatic flanging machine

Erie Machine Tool Int'l Equipment | Erie, PA
Category: Flangers
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Sbfm
Model: FCC-BSMD-C 5025
Year: 2023
NEW 1” X 196.8” (25mm x 5000mm) FCC-BSMD-C 5025 Hydraulic Centerless Automatic Flanging Machine, For Round Dished Ends without center hole., Thickness: max 25 mm MS / S235 grade plates, Diameter of dished end: max Ø5000 mm/min 500 mm, Including with 2 knuckles/flanging tools as per your size ...more

1.77" x 354.3" (45mm x 9000mm) Pyramid hydraulic flanger

Erie Machine Tool Int'l Equipment | Erie, PA
Category: Flangers
Seller: Erie Machine Tool Int'l Equipment
Location: Erie, PA
Mfr: Pyramid
354.3” x 1.77” (9000mm x 45mm) Pyramid Hydraulic Flanger, 9000mm (354.3”) Blank Diameter Maximum, 45mm Thickness Capacity (1.77”), The following table has the knuckle radius sizes available for this machine:, R50, R150, R250, R350, R550, R750, R100, R400, R450, R500, R600, R650, R700, R800 ...more

9" Custom spiral tube flanger, 6 head rollers, inline hydraulic system, air lines, #18774

Yoder Machinery Sales | Holland, OH
Category: Flangers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Custom
SERIAL NUMBER: A251314, CAPACITY. 9" - COULD EASILY BE ADAPTED, FOR OTHER SIZES, HEAD ROLLERS. 6, (3) FLAT GUIDE ROLLS. 3" X 3", (3) FLANGE ROLLS. 1-1/4" (FLANGE) X 4", (2) ELECTRICAL CONTROL BOXES, INLINE HYDRAULIC SYSTEM, AIR LINES, HAND LOCKING HANDLE, SPARE 6-ROLL HEAD, MOTOR - DRIVE. 3 HP, MOTOR - HYDRAULIC ...more

Grotnes #606, flanger/grover, 8" hold down cylinder stroke, #63776

Yoder Machinery Sales | Holland, OH
Category: Flangers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Grotnes
Model: 606
SERIAL. 89-1767, MODEL. 606, HOLD DOWN CYCLINDER STROKE. 8", DRIVE MOTOR. 5 HP, HYDRAULIC MOTOR. 10 HP.

Norwesco, sheet metal flanging, beading, flairing, dual end forming

TNT Industrial | Orange, CA
Category: Flangers
Seller: TNT Industrial
Location: Orange, CA
Mfr: Norwesco
Dual End Can Bead Flanging Machine. Horizontal Distance Between Rollers: 28". Weight: 1,500 Lbs. - Back Plates..