Buy or Sell Your Lapping Machines

UHLING - HP-3000: Case Clamp (Single-Bay) + Optional Top Clamp w/extensions -- Clamping Capacity: 55" L x 96" H x 24" D; Large enough for multiple boxes.Offers: Versatility; quick 30-Sec setup or changeover. -- Pressure Elements -- (4) Dual AirPods pressure bars that are pneumatically activated; counterweight ...more

LANCASTER - 1861-B: Clamp Assembly 2-Way Two-Way Frame Clamping machine -- Motorized open/close of main jaws via 1/2 HP motor. -- Max. clamping capacity: 52" Tall x 56" W; minimum: 15" Tall x 11" W. -- (1) 6" Bore; 2" stroke pneumatic cylinders for main jaw clamp.2) 4" Bore; 2" stroke pneumatic cylinders for auxiliary ...more

used- kapsall model e explosion proof rated quill capper. c-frame design, 4 capping quills, single grip container stabilizing, capable up to 74mm cap. elec: 1/60/120v. overall dims: 66"l x 44"w x 93"h.

KREG KFT 4X8 Face Frame Assembly. -- American-Made 4' x 8' Frame Assembly Clamp with floor stand. -- Working surface at approximately 30 angle for convenience. -- Unit includes; (4) Overhead air cylinders mounted on an overhead beam adjustable up-and-down. -- Clamping beam that moves from left-to-right by ...more

Radial Drilling Machine, OEM: Ikeda Iron Works, Ltd. (Japan), Model: RM1300, Manufacturing No.: 75033, DOM: 1975, Electrics: 220-440 Volt, 3 phase, 60 cycle, 13-6.5 Amps, Main Motor: 10 HP, s & :,.Arm Length: 5’ Nominal (54-1/2”),.Column: 14” Nominal (13-5/8”),.Spindle Speeds (12): 30-1,440 ...more

SERIAL. 67-136-R, MODEL. HPL-1, CAPACITY. 3/4" ROLLED THREADS, CAPACITY TAPPING. 3/4", STROKE. 4-1/2", 6 POSITION TURRET. YES, AUTO CYCLE. YES, DUAL PALM BUTTONS. YES, COOLANT. YES, DRIVE MOTOR. 5 HORSEPOWER, HYDRAULIC MOTOR. 2 HORSEPOWER.

Working AreaCenter width 40 in Turning diameter over bed 16 in Turning diameter over support 9 in Turning diameter without gap bridge 20 in Bed width 12 in TravelsTravel X-axis 9.4 in Travel Z1-axis 5 in HeadstockSpindle speed (12) 30 - 2,000 rpm Spindle bore 2 in Spindle mount D1/6 Spindle taper MT 6 FeedFeed X-axis ...more

Used SOCO Systems box taper, model T-10, upper and lower taping heads, 380 volts, serial# 059 36.

Max Clamping Force W 35 4 X 19 7 Mold H X V: 307 kN, Max Clamping Force W 15 7 X 15 7 Mold H X V: 114 kN, Max Clamping Force W 20 X 20 Mold H X V: 193 kN, Control Unit Type: BURPMG10-480Vac, Interface: E70.0 + PMG8 type.

TSUGAMI BA-26 SWISS TYPE CNC LATHENEW: 2006 Video Links:https://youtube.com/shorts/WRD5yxyjC8E?=sharehttps://youtube.com/shorts/wUuTyWTB7NA?=sharehttps://youtube.com/shorts/WRD5yxyjC8E?=share :CHUCKING BARSTOCK DIA. 0.11 to 1.0"MAX. MACHINING LENGTH (FIXED/ROTARY GUIDE BUSHING). 6.69"/3.14"MAX. DRILLING ...more

Spec, Bending length 24', 175 Ton clamping, 2021 Rebel 175T 24' Press Brake.

Machine Stock Size: 1.02", Maximum Machining Length: 8.21", Maximum Spindle Drilling Diameter:.468", Maximum Main Spindle Tapping: M10, Maximum Sub-Spindle Chucking Diameter. 1.02":, Maximum Sub-Spindle Drilling: 0.375", Maximum Sub-Spindle Tapping: 0.3125", Maximum Tool Spindle Tapping Diameter. 0.25":, Z1-Axis ...more

Banner SMBPVA6 64897 Sensor Bracket Zinc Plated Metal Brackets, Set of 4 - Banner Engineering SMBPVA6 64897 Bracket Set of 4 Zinc plated metal brackets, Brackets clamp onto 28 mm pipe, - Banner - Banner Engineering - SMBPVA6 - 64897.

EquipmentRadial Drills1980 Ogawa Ironworks Radial Drill HOR-D 20001980 Ogawa Ironworks Radial Drill HOR-D 2000Have one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Radial DrillsManufacturer:OGAWAModel:HOR-D 2000Year:1980Stock ...more

Unused Engel e-victory 765H/170W/400 combi injection molding machine for high precision manufacturing. 4,000 kN (450 US tons) clamping force. Tie-bar-less design. Machine serial number 258692, built in 2023.

Atech Model CRATER-06 AP Automatic 20" Straight Upcut Saw with Auto-feeding The CRATER-06 AP has been designed for straight cut operations of large size of aluminum and vinyl profiles Servo-controlled Infeed Speed and Saw Blade Stroke. Robust Mechanical Construction for High Cutting Accuracy 3 Horizontal and 3 ...more

DOUCET - SDM-M-30-72: Frame & Cabinet Door ClampDesigned for: Quick & accurate clamping & squaring of miter and regular cabinet doors. -- 5-1/2" x 12-1/2" Min. door size; 30" x 72" max. door size. -- (1) Fixed vertical clamp; (2) mobile vertical clamps on roller bearings for effortless positioning. -- (1) ...more

Sinus 330/1500 DSinus 330/2000 DSinus 330/3000 DSinus 400/2000 DSinus 400/1500 DSinus 400/3000 D Working Area Workpiece length (max.) 59 in 79 in 118 in 79 in 59 in 118 in Turning diameter over bed 26 in 26 in 26 in 31 in 31 in 31 in Turning- over support 17 in 17 in 17 in 22 in 22 in 22 in Turning diameter without ...more

Stock #: 122230041, Location: OH, Brand: MTD, Model: M71-H3, Serial #: 1185-03224, Tube Capacity: 1-1/2" OD, Hydraulic Ram Cylinder: 3-1/4" Bore x 4" Stroke, Ram Force: 8 Tons, Hydraulic Clamping Cylinder: 2-1/4" Bore x 2-1/2" Stroke, Clamping Force: 17-1/2 Tons @ 500 PSI, Jaw Opening: 1-3/4" ...more

JLT CLAMPS 718A-M3-8 Panel and Door Clamp Buddy System includes #79F-8-PC & 717C Unique all-in-one Panel Clamp & Cabinet Door Clamp. : -- 26" Deep x 62" wide clamping cap. -- Single row door clamp, air operated assembly on a 70 angle for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting ...more

Product, Stock Number AM20435 Brand Manchester Tool & Die Capacity 3.00 inches, 3” Manchester #M82H3 multi-hit rotary shuttle hydraulic vise & ram tube end forming machine, High speed vise & ram forming / single flaring / double flaring / beading / expanding / reducingTube working OD: 1/8″ ...more

Main s 5C72PcSTD:, Rack Included, As Shown 72 Pc Set covers all sizes, from 1/64 to 1-1/8″, X 64ths Fits any machine / Accessory with 5-C Spindle Taper Precision Ground Clamping Surfaces, max runout.0005″ Threaded Internally and Externally Each Collet is marked with size for easy identification Collets are ...more

Working AreaCenter width 59.06 in Center height 8 in Turning diameter over bed 15 in Turning diameter over gap bridge 23 in Turning- over support 10 in Gap bridge length 7 in Bed width 10 in TravelsTravel X-axis 8.3 in Travel Z1-axis 6 in Swing range of top slide 45 HeadstockSpeed range, high 550 - 3,000 rpm Speed ...more

Volts 220, R-6000 Articulated tapping arm machine. Capacity: M2 – M27, NET WEIGHT-----------28, GROSS WEIGHT--------32, DIMS-------------------96'"x46"x36".

JLT 717C-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30 angle for ease of ...more

, Used Haimer HSK40 Shrink Fit Tool Holder set, featuring 3 holders with 8mm/11mm/12mm hole diameters. Overall lengths approx. 4.33/3.92. High-quality tooling from HAIMER, compatible with HSK40A interface. Perfect for precision needs., Spec Sheet:, Haimer HSK40 SHRINK FIT TOOL HOLDER, 8mm/12mm Set of 3, USED - Set of ...more

Fellows model 10-4 vertical gear shaper 13" diameter 4" stroke, 3" riser, hyd table clamping, good condition gone through s/n 34475.

Well-maintained 2005 POLAR 137 (54") XT-AT paper cutting system in excellent condition, featuring a POLAR Autotrim guillotine cutter with under 800,000 total cuts. This complete cutting system includes dual POLAR air pallet lifts, air pallet boards, and a Dornier waste conveyor—providing an efficient ...more

TAYLOR - 713A-5LCM: Rotary Door Clamp (5-Section) -- 5-Section rotating clamp for: Accurate squaring of Miter Doors & stile and rail doors. - Clamp & Square a door in: (2) Seconds. -- Each section has: 26" x 97" Max. cap.; 4" x 12" min. cap.; counterclockwise rotation with: Auto indexing stop system. -- Single ...more

, MFG: Astral Master Sqaure, 48" x 36" x 6", 5 Hole Picking, Center Hole for Flipping Square, Machine Type.Inspection Machines Manufacturer.ASTRA Model.N/A Year.N/A Condition.Used.

BAILEIGH MAGNETIC BOX AND PAN BRAKEMODEL BB-4816M… S/N 1905121… NEW 2020 Capacity (Mild Steel). 48" x 16 Ga.Bend angle:. 0-180 degreesClamping force. 6 tonMax. clamping bar lift (magnet). unlimitedBox depth. unlimitedPower requirements. 220V 1-phase :- Foot pedal- Magnetic clamping brake- Unlimited ...more

JLT CLAMPS 717C-DDC CLAMP, PANEL AND DOOR.Pneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 38" Front-to-back x 98" left-to-right clamping capacity. -- Single row 2-station Door Clamp with (2) horizontal pneumatic clamps and (4) vertical pneumatic clamps. -- Special mount on a 30 ...more

5/7 MVA 55/65 c rise ONAN/ONAF 34,500 delta primary 4160/2400 secondary +- Taps.

JLT CLAMPS 717C-M Panel and Door ClampPneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 26" Front-to-back x 62" left-to-right clamping cap. -- Special design for mitered doors. -- Single row Door Clamp with (2) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- ...more

2017 Machine, Essentially Un-Used Max. Wrapping Speed: 25-30 Loads/Hour Max. Wrapping Height: 2,400mm Turntable Speed: 0 - 15 RPM Turntable Size: 2,000mm Turntable Drive: 1.5 HP Max. Load Weight: 3,000 kg Standard Film Width: 500mm Rigging, Loading, Delivery, etc. can be priced based on your needs. Please contact us ...more

Spec, Max Thickness: 0.078″, Max Thickness (gauge): 14 gauge, Overall Length: 10.49′, Dimensions: 98″/175″/74″, Weight: 16,500 lbs, Control: CNC (ERFOLD ADVANCED CNC Graphic Software on 15.6” Touch Screen control), Model: MFB 3220, Maximum sheet length: 10.49 ft (3220 mm), Maximum ...more

QUICK Clamp Rack 8' -- : The QUICK Clamp Rack s a cleanly-designed, exceptionally strong frame, with massive 4" x 4" structural tubing cross beams and feet, and 4" x 6" structural tubing legs.The innovative “two-sided"; frame design allows for either one-sided or two-sided operation, at the shop ...more

PMC, Models RC1600, MSL-60, PS2100, 16 head stainless steel, rotary pump placer and capper with 60" OD unscrambling bowl and incline cleated feeder with cap hopper rated up to 150 placements per minute – depending on materials and application Container size per application. Model MSL-60, a 60" OD cap ...more

Working AreaDrilling capacity 2.36 in Tapping capacity, cast-iron M 50 Tapping capacity, steel M 45 Drilling depth (max.) 12 in Throat 14 - 63 in Spindle nose-to-table surface distance 14 - 49 in Drill head travel (horizontal) 49 in HeadstockSpeed range (2) 38 - 2,000 rpm Spindle mount MT 5 FeedFeeds 0 - 11.81 in/min ...more

Fadal VMC 4020HT CNC Vertical Machining Center Reman 2004, s/n 032004106950, Reman 2004, Fadal CNC 88HS CNC Controller, 20" X 48" Table, 40" X 20" X 20" Travels, High Torque Spindle, 21 ATC, 40-Taper, Rigid Tapping, Extended Memory 4 Meg.

Haas VF2D CNC Mill, Key :, – Make/Model: Haas VF-2, – Year: 2002, – Travels: 30″ X, 16″ Y, 20″ Z, – Spindle Speed: 7,500 RPM, – Tool Changer: 20+1, – Haas Control, – Includes rigid tapping, chip auger, and coolant system.

SERIAL. 896A-108-01 MODEL. 6A PUNCHING CAPACITY. 105 TONS PUNCHING SIZE. 1-5/16" HOLE THUR 1" THICK DEPTH OF THROAT. 24" ANGLE SHEARING. 6" X 6" X 1/2" PLATE. 1/2" X 21" TO 3/4" X 10" ROUNDS. 2-1/4" SQUARES. 2" ANGLES. 4" X 4" X 1/2" COPING CAPACITY. 3-1/4" X 3-1/4" X 1/2" NOTCHING CAPACITY. 3-1/4" X 4-1/2" X 1/2" ...more

Stock #: 122230026, Location: OH, Brand: MTD, Model: M71-H3, Serial #: 1185-03224, Tube Capacity: 1-1/2" OD, Hydraulic Ram Cylinder: 3-1/4" bore x 4" stroke, Ram Force: 8 Tons, Hydraulic Clamping Cylinder: 2-1/2" bore x 2-1/2" stroke, Clamping Force: 17-1/2 tons @ 500 psi, Jaw Opening: 1-3/4" ...more

Barber Colman Model 14-15, 14" Diam Capacity, 15" cut length, Hydraulic clamping, collet fixture, Differential, Very Nice Condition, SN 1396, inspect under power in NC..

One Used 5/16" Snow Model NT-2 Twin Spindle Nut Tapper, #6-5/16" Rated Capacity Mild Steel, 2" Tap Head Stroke, 4000 Tapped Holes per Hour, Vibratory Bowl Feeder and Euroma Twin Tapping Head, AC Motor and Controls, Located FOB Bridgeport, CT Warehouse.

HOLZ-HER - 1516 Case Clamp (Single-Bay) -- 1-Bay Clamp; 100" x 50" x 24" clamping cap.; (1) movable, vertically positioned clamping beam with: (3) Horizontal clamps; (4) adjustable vertical clamps. -- Total of (14) pressure cylinders with: 3-7/8" Stroke & (4) adjustable counter pressure bars; 700 Lbs/cylinder ...more

Product, Clausing Ibarmia B-45 Geared Head Drill PressCapacities Maximum drilling capacity in steel 1.77″ (45mm) Maximum drilling capacity in cast iron 2.17″ (55mm) Maximum tapping capacity in steel 1.3″ (33mm) Maximum tapping capacity in cast iron 1.57″ (40mm) Spindle taper 4MT Quill diameter ...more

, - Model: No model tag. This unit looks identical to other F-4 units we have in our inventory., - Manufacturer: Kaps-All Packaging Systems, Riverhead - New York, - Stainless Steel Construction Frame, - 4 Spindle - Capping Quill Wheels, - Left to Right Operation, - Container Stabilizer Belts, - Electronic Height ...more

Gleason Model 512 hypoid gear tester. 20" max Gear Diam 10" max Pinion Diam. 39 degree taper, hydraulic clamping, automatic cycles, many s. Inspect in NC under power..