CNC Rotary Tables and Indexers

Rotary Fixture Platter Diameter: 6.3″ (160MM), Max Part Swing: 7.52″ (191MM), Max Cart Capacity (Weight): 36.3 KG, Axis Travels A / B Axis: A (Tilt) +/- 120° / B (Rotary) ...more

Platter Diameter: 7.87 in, 200 mm, Max Weight on Platter: 80 lbs, 36.3 kg, Part Swing Max: 8.1 in, 205 mm, Number of Std T-Slots: 6 @ 60°, Spindle-A (Tilt), Max Speed: 100 °/sec ...more

, JNC Series, Light weight Compact, Suitable for small-sized machining centers, Accurate indexing, Accurate indexing is available by durable worm wheel of special alloy., Outstanding water ...more

Nikken CNC 200 LF, Serial No. 3477, New - 1995, Table Size.8.60" (220 mm), Rotation Speed.16.6 RPM, Diameter Spindle.60 x 52 mm, Total Reduction Ratio.1:90, Motor:, - Maker.Fanuc, - ...more

(1) Used 12" Tsudakoma Model RNCM-301R Rotary Table; Fanuc Compatable; Mfg. 2001; S/N 020217, Handedness.Right, Table Diameter.12.6", Center Height.8.27", Center Nose.40H7 Nose ...more

, Weight510 poundsDimensionsExport Crate 32 in x 17 in x 27 in Platter Diameter12.20 in Max Weight on Platter (w/support)435 l Max Weight on Platter (unsupported)218 lb Number of Std ...more

16" TSUDAKOMA HORIZONTAL CNC ROTARY TABLE, Model RY-401, New 2005, S/N 972073, Stock# K15398, TABLE :, This Horizontal CNC Rotary Table was Designed for Full Contour Milling or Indexing of ...more

36" X 36" T SLOTTED TABLE, 4 POSITION INDEX WITH LOCKS, 16,000 LB CENTER LOAD CAPACITY, 360 DEGREE SCALE, 1/2" CENTER HOLE, MANUAL CRANK (JUST INSERT A 1/2 IN DRIVE), 1" OD SPLINE SHAFT ...more

, DeVlieg 40" x 40" Hydraulic Lift Rotary Index Table, 5 Degree, Hydraulic Tanks and Pump.

Reference #32077, 42" Producto CNC Table, s:, Fanuc Red Cap Motor, CATALOG :, Table Diameter. 42", Table Height. 13", Parallelism (top to bottom).0004", Table Top Flatness.0005", Table Top ...more

Table Size 48 Inches Work Height 40 Inches (Approximate) Number of T-Slots 6 Width of T-Slots, Bottom 1.5 Inches - Approximate Depth of T-Slot, Overall 1.75 Inches - Approximate Distance ...more

, ROTARY TABLE INFORMATION, MANUFACTURER.GIDDING & LEWIS, TABLE SIZE.72" X 108" (1828MM X 2743MM), TABLE SERIAL NUMBER.040-2118-93, ROTATION TYPE.AIRLIFT/HYDROSTATIC/MANUAL, TABLE ...more

Reference #31396, Giddings & Lewis 360C 84" x 96" B-Axis CNC Rotary Table, S:, 50 Ton Table Weight Capacity, Full Contouring B-Axis, Rotary Indexing & Milling Capability, Table ...more

216.53" X 216.53" INNOCENTI CNC B-AXIS INFEEDING ROTARY TABLE, Model CWD, STEEL SLIDING WAY COVERS, PRICE: F.O.B. PENNSYLVANIA, Model CWD Condition Used Stock Number 27912 Table size ...more

, SPINDLE S.A.E METRIC, Number 2 2, Max Speed 200 /sec 200 /sec, Max Torque 25 ft-lbf 34 Nm, Nose Thread 2 3/16 in - 10 2 3/16 in - 10, Runout Max 0.0004 in 0.010 mm, Center Height 5.875 in ...more

To the best of our knowledge all listed below are deemed correct., It is the buyer’s responsibility to confirm all and we encourage an inspection of the machine(s) and accessories ...more

Haas T5C-3 Tilting (3) Headed 2-Axis Brushless Sigma 1 Rotary Table w HA5C-3 Rotation, Stock: 6842, Manufacturer: Haas, Model: T5C-3, Age: N/A, A AXIS (TILT) MAX SPEED: 0.001 TO 200 DEGREE ...more