RT Machine
Hughesville, PA 17737-9082
Surplus Record Dealer Since 2025
Contact
Sales
About
RT Machine is a stocking distributor of new and used industrial woodworking machinery. We have an 80,000 square foot warehouse in Hughesville, Pennsylvania, which holds over 600 woodworking machines in inventory!
Products & Services
- Woodworking Machinery
Associations & Affiliations
586 listings in 91 categories
60 Hz Three Phase Transformers
10 Results
7.5 KVA 460 Primary, 230Y/133 Secondary, Acme, Drive Isolation Transformer, 3 Phase, 60 Hz
Category: 60 Hz Three Phase Transformers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Acme
Acme Drive Isolation Transformer 460/230Y Catalog Number:DTGA-7-2S 7.5kVA 460V with FC Taps 230y/133.
15 kva, 460 Primary, 460Y/266 Secondary Federal Pacific Caterpillar #WS-2, Transformer
Category: 60 Hz Three Phase Transformers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Caterpillar
15 KVA Primary: 460 (H) Secondary: 460Y/266 (X) Serial #: 217639.
27 KVA 575 Primary, 460 Secondary, General Electric #9T23B4002G26, Dry Type Transformer, Nema Class AA, 3 Phase, 60 Hz
Category: 60 Hz Three Phase Transformers
Seller: RT Machine
Location: Hughesville, PA
Mfr: General Electric
Electric 27.0 KVA Nema Class AA Dry Type Transformer Model 9T23B4002G26 575v-460v Primary (H) 575 Volts (Line-Line) Secondary (X) 460 Volts (Line-Line) (X) 266 Volts (Line-Neutral) Serial No. 475A563CAG007.
30 KVA 480 Primary, 400Y/231 Secondary, MGM Transformer, Dry Type Power Transformer, 3 Phase, 60 Hz
Category: 60 Hz Three Phase Transformers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mgm
MGM Transformer Company 30 KVA 3-Phase Voltage: 480-400y/231.
45 KVA 480 Primary, 208Y/120 Secondary, Hammond, Dry Type Transformer, 3 Phase, 60 Hz
Category: 60 Hz Three Phase Transformers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hammond
Hammond Power Solution 45kVA P480 to S208Y/120 Transformer 45kVA Pri:480V Sec:208/120.
RT Machine has 5 more
listings in 60 Hz Three Phase Transformers.
Atomizers
2 Results
Carel #MC, Atomizing Humidification System, (17) Room Atomisation Nozzles, up to 500 lbs/hr Modulating Room/Duct Control Cabinet
Category: Atomizers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Carel
Model: MC
Carel MC Atomizing Humidification System 17 Room Atomisation Nozzles (up to 9 lbs/hr) 1 Modulating Room / Duct Control Cabinet (up to 500 lbs/hr) 1 Wall Mount Modulating Sensor for moisture control 1 Pressure differential switch 1 Coalescent filter 0.01 micron 0.01 ppm oil 1 Five microns water filter white This is ...more
Carel #MC, Atomizing Humidification System, (47) Room Atomisation Nozzles, up to 500 lbs/hr Modulating Room/Duct Control Cabinet
Category: Atomizers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Carel
Model: MC
Carel MC Room Atomizing Humidification System 47 Room Atomisation Nozzles (up to 9 lbs/hr) 1 Modulating Room / Duct Control Cabinet (up to 500 lbs/hr) 1 Wall Mount Modulating Sensor for moisture control 1 Pressure differential switch 1 Coalescent filter This is part of a total plant liquidation, please call for.
Automatic Drilling and Tapping Machines
1 Result
Koch #BD-A, Double Cycle Double-End Automatic Drilling Machine, 48 PPM, 2 station, 2017
Seller: RT Machine
Location: Hughesville, PA
Mfr: Koch
Model: BD-A
Year: 2017
Koch Model BD-A Double Cycle Double-End Automatic Drilling Machine Workpiece Length: 250 - 1500mm Workpiece Width: 38 - 250mm Workpiece Thickness: 16 - 30mm Right Side Traverses The workpieces are transported through the working stations by means of a cam transport system Stock is machined in a clamped position Hopper ...more
24" wide x 16' long, Belt Conveyor, w/ Pinch Roll
Category: Belt Conveyors
Seller: RT Machine
Location: Hughesville, PA
16' Belt Conveyor, w/ pinch Roller
Category: Belt Conveyors
Seller: RT Machine
Location: Hughesville, PA
Automated Lumber Handling 18ft Belt Conveyor with Pinchroll Conveyor Size: 18ft Long x 24 inches Wide Powered by 1-1/2HP Motor - Chain Driven 24" Wide Pinch Roll with Airbag Pressure Unit w/ Regulator.
30" W x 20' L Newman Belt Conveyor
Category: Belt Conveyors
Seller: RT Machine
Location: Hughesville, PA
Newman Belt Conveyor This Conveyor was with a Newman S-382 Planer Driven by Hydraulic Motor that Connects to the Planer or another Hydraulic Unit Conveyor is 30" wide X 20' Long.
Fezer #3SE-3.6-1P+2R, Wood Veneer Screen Dryer, Infeed and Outfeed, 5 sections, 142" screen
Category: Belt Ovens
Seller: RT Machine
Location: Hughesville, PA
Model 3SE 3,6 1P+2R Heating Zone 5 Sections Steam Heating One Section Cooling Screen Width 142" HP 5 x 7.5, 1 x 4.
8" x 70.75" Stahle #Saturn-Quatro, 4-Head Narrow Belt Sander, 7" max Sanding width, 11" min. Sanding length, 5.5 HP
Category: Belt Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Stahle
Model: SATURN QUATRO
Stahle Model Saturn Quatro (4-Head) Narrow Belt Sander Max Sanding Width: 180mm ( 7") Min Sanding Length: 280mm (11") Head Configuration: -- Two (2) Top Combination Head Sanding Units Powered by 4kW (5.5HP) Motors -- Brush Head Powered by.37KW (0.5HP) Motor -- Two(2) Bottom Combination Head Sanding Units Powered by ...more
Crouch #ET-40, Edge Sander, 8" x 40" platen, 3 HP, 3ph, 208-230/460 V.
Category: Belt Sanders
Seller: RT Machine
Location: Hughesville, PA
Model: ET-40
Crouch Model ET-40 Single Sided Edge Sander 8" x 40" Wood platen Motor - 3HP 3PH 208-230/460V 60cy Rubber Covered Pulley on Drive End 11" x 40" tilting table End table - 10" x 15" Dead Head on Idle end with Wood Form and Graphite Dust Hood on Drive end Serial No. N/A This is a part of a total plant liquidation, Please ...more
Mattison #181, double Sided Osillating Edge Sander, 7.5 HP, 3ph, 230/460 V., 10" x 55" platen
Category: Belt Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mattison
Model: 181
Mattison Model 181 Double-Sided Oscillating Edge Sander Motor: 7.5HP, 3PH; 230/460 Volt Oscillation motor: Approximately 1HP Platen Size: 10" x 55" Side Tables: 12" x 64" tillable to 45 degrees End Table: 26" x 20" w/Oversized Wood Top 24" x 45" Serial No. 21632 This is a part of a total plant liquidation, Please call ...more
53" Butfering #Optimat-SWT335/RRL, 3-head belt sander, 7.5 HP, 460 V., 3ph, 55 cfm @ 90 psi, 2015
Category: Belt Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Butfering
Model: OPTIMAT-SWT335/RRL
Year: 2015
Butfering Model SWT 335 RRL Three Head 53" Wide Belt Sander, Width capacity 1,350mm (53"), Work Piece Thickness: 3mm to 160mm (1/8" to 6"), Abrasive Belt Size: 1,370mm (53") x 2,620mm (103"), Variable Feed Vacuum Feed Belt: 2.5 to 13 m/min (8 to 42 ft/min), Vacuum Motor: 7.5 HP, 1st Head: Steel Profiled Contact ...more
53.15" electromagnetic chuck #Giant-Rustic-1350-HHH, cup brush sanding machine
Category: Belt Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Emc
Model: GIANT-RUSTIC-1350-HHH
EMC Model 1350 HHH Giant Brush Sanding Machine - Never Used Premium high volume sanding machine made in Italy. Installed and tested, but was never implemented into production. Working width: 1.35m Working thickness: 3mm to 150mm CE and CSA Standards Line machine: 900mm from floor. 3 sanding brush groups 3 zones x 11 ...more
Carton Packaging Machines
1 Result
Homag #VKV710/25/11/R, Carton Closing Machine, 6-10 PPM, 15.7"-98.4" L x 7.1"-43.3" width x 1.1"-9.8" H Package Size, 35 MPM, 480 V, 2017
Category: Carton Packaging Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: VKV710/25/11/R
Year: 2017
Homag Model VKV710/25/11/R Cardboard Box Closing Machine 2017 Machine with very low usage Package Dimensions (Min/Max) Length: 400mm/2500mm (15.74"/98.42") Width: 180mm/1100mm (7.08"/43.30" Height: 28mm/250mm (1.10"/9.84") Max Weight: 80kg (175lbs) 6 - 10 Packages/Min Working Height: 900mm (+/-30mm) Feed Speed: ...more
14' x 50' Chain Deck, 2 HP
Category: Chain Conveyors
Seller: RT Machine
Location: Hughesville, PA
Chain Deck 14’ Wide x 50’ Long Chain Spacing 27”, 44”, 44”, 44” Drive Motor 2HP.
12' W x 16.5'L x 7' H Buss Automation Chain Deck, 5 Strand, 3 HP
Category: Chain Conveyors
Seller: RT Machine
Location: Hughesville, PA
Buss Automation Five Strand Chain Deck 16.5' Long X 12' Wide X 7' Tall (Legs can be cut down) Chains are 2' between 1 and 2, 2' between 2 and 3, 2' between 3 and 4, 4 ' between 4 and 5 Motor 3HP; 3PH.
Peerless #30-Mono, Storage Bins, 6000 cu.ft., 75 Tons, 15 HP (2 available)
Category: Chip Bins
Seller: RT Machine
Location: Hughesville, PA
Mfr: Peerless
Model: 30-MONO
Peerless 30 Unit Mono Bins Bottom Discharge Opening 72” x 170" Each Bin Provides 6000 Cubic Feet and has a Maximum Structural Design Strength to Contain 75 Tons Gates are hydraulically Operated Clam Type Powered by Two 4-1/2” Diameter x 24” Stroke Cylinders Hydraulic Power Unit 15HP Two Electrical ...more
Clamp - Case & Feed Thru
5 Results
Comil #Cosmo-2, Case Clamp, 230 V., 3ph, 3.7 KW, 2002
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Comil
Model: COSMO-2
Year: 2002
Comil Model Cosmo 2 Case Clamp, Max. Material Size: 96" W x 52" H x 30" D, Power: 3.7 KW, 230 Volt, 3-Phase, Push-Button Controls, Serial #: 187/85.
Italpresse #SP/1-A, Automatic Through-Feed Case Clamp, 29.5" clearance, 480 V., 92 FPM belt, new
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: SP/1-A
Italpresse Model SP/1-A Automatic Through Feed Case Clamp Maximum working depth:.700 mm (27.6") Minimum working depth: 250 mm (9.8") Maximum working length: 2,500 mm (98") Minimum working length: 300 mm (11.8") Maximum working height: 1,220 mm (48") Minimum working height: 300 mm. (11.8") Maximum through-feed ...more
Lancaster, Case Clamp, 26" x 96" x 80", 3HP, 12" bore, 4" cyl, AS IS
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Lancaster
Max Capacity Opening: 96" x 26" wide x 80" high Motorized Open/Close with Approximately 3HP, 3 Ph Motor Powered by One 12" Bore, 4" Adjustable Stroke Air Cylinder Furnished complete with two foot control switch units, air regulator with gauge air filter and air lubricator Serial No. 1125-E-69 NOTE THAT THERE SHAFT FOR ...more
Omec #SBM-1200, Drawer Box Clamp, 180 BPH, PLC, new
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: SBM-1200
Omec Model SBM 1200 Drawer Box Clamp Technical Data Power installed on the machine: 1.12 Kw Working pressure: 0.4 MPascal Boxes production: 180 n/h Workpiece Limits Draw Length: min. 100mm max. 1050mm Draw Width: min. 70mm max. 400mm Draw Thickness: min. 2mm max. 15mm Standard Equipment Hydraulic Manual clamp has been ...more
Omec #SCM-1200, Drawer Box Clamp, 60 BPH, PLC, new
Category: Clamp - Case & Feed Thru
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: SCM-1200
Omec Model SCM 1200 Hydraulic Drawer Clamp Technical Data On board machine installed power: 0.5 HP Working pressure: Mpascal 0.7 Drawer production output: Up to 60 boxes/hour Workpiece Limits Draw Length: min. 250mm max. 1200mm Draw Width: min. 240mm max. 600mm Draw Thickness: min. 60mm max. 260mm Standard Equipment ...more
Clamp Carrier - Manual & Auto
1 Result
JLT #800181, 30 Section Clamp Carrier, 36" Clamps, 1997
Category: Clamp Carrier - Manual & Auto
Seller: RT Machine
Location: Hughesville, PA
Model: 800181
Year: 1997
10 1/2" Wide 36" Clamps.
CNC Beam/Drill Lines
1 Result
Ritter #R113, Manual Single-Row Line Drill, 13-Spindle, 0.75 HP, TEFC, 13 vertical spindle rows, 120 V., new
Category: CNC Beam/Drill Lines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ritter
Model: R113
Ritter Model R113 13-Spindle Manual Single-Row Line Drill 13-Spindle Manual Line Drill 3/4 HP Spindle Drive Motor, TEFC 60" Back Fence Assembly (1) 13-Vertical Gear Driven Spindle Rows 10mm Bored Collets (7) Right Hand, (6) Left Hand (2) Index Pins 20" X 48" Work Table Surface Wired 1-Phase 120 Volt, 60 Hz. Manually ...more
CAMfive #CMA6340TF, Automatic CO2 Laser Cutter, (2) 80 Watts Laser Power, 63" x 40" Work Area, 4000 DPI Resolution Ratio, 220 V
Category: CNC Lasers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Camfive
Model: CMA6340TF
CAMfive Model CMA6340TF Automatic CO2 Laser Cutter Laser Type: CO2 High-temperature resistant glass tube. Laser Power: 2 x 80W (Available Upgrade to 100w, 130w and 150w). Working Area:63 inch x 40 inch (160 cm x 100 cm). Work Table Type: Aluminum Conveyor Worktable and Automatic Roll Feeder. Machine Weight:1,130 ...more
Razorgage #APS, Automatic Optimizing Cutoff Saw System, 1" arbor, 19.7"/24" blade, 60' L stock max, 50 IPS push max, New
Category: Cutoff Saws
Seller: RT Machine
Location: Hughesville, PA
Model: APS
APS Automatic Optimizing Cutoff Saw System Saw Motor : 7.5 hp (enclosed fan cooled), available in 208-230-460Vac 3-phase Power Requirement: 10 Amps 120 VAC plus one of the following: 230 VAC, 3 phase, 30 Amps OR 460 VAC, 3 phase, 20 Amps Dust Collection Ports: Two 4" diameter (102 mm) requiring 600 cfm (17 m3) minimum ...more
1.37" x 5.5" Friulmac #Flormat-C-002, Double End Cut-Off, 4 HP, 460 V., 2019
Category: Cutoff Saws
Seller: RT Machine
Location: Hughesville, PA
Model: FLORMAT-C-002
Year: 2019
Friulmac Automatic Double End Cut Off Machine Cutting Length 6.29" - 59.05" Working Width 1.18" - 5.51" Working Thickness 0.47" - 1.37" Four 4HP (3KW)Trim/Cut-off Motors 2 (2 each side) Saw Blade Diameter 150mm Max X 30mm bore Dust Collection 4 X 120mm Outlets New in 2019 Current Voltage: 460v.
Northtech #NT-CS-36, Timber Up-Cut Saw, 25 HP, 3ph, 230 V., 1500 RPM, 2" diameter, 13" stroke, New
Category: Cutoff Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-CS-36
Northtech NT CS-36 Timber Up-Cut Saw Motor: 25HP 3PH 230V; (1500 RPM) 36" Carbide tipped blade with 120T included 2" Saw arbor diameter Cycle operation: Pneumatic Table size: 57-3/4" x 34-3/4" Safety interlock on blade door Quick access on front of the machine to adjust stroke 25HP arbor motor Central lubrication ...more
Razorgage #Cyclone-600, Upcut Saw, w/ 6" Fence, 7.5 HP, 3450 RPM, 1" arbor, 24" blade, PLC, New
Category: Cutoff Saws
Seller: RT Machine
Location: Hughesville, PA
Model: CYCLONE-600
Razorgage Model Cyclone 600 Upcut Saw with 6" Fence Cuts materials up to 1" x 20" or 6" x 6" Includes RazorGage's Patented Safe-T-Crowder, Allowing the Operator to Crowd Stock Against The Fence with Two Anti-Tie Down Handles Clamp and Motor Both Ride on Linear Guides & Bearings Main Motor: 7.5 HP ...more
Northtech #NT-UCS-14, L or R Upcut Saw, 7.5 HP, 4260 RPM, 78 cpm, 14" blade, 1" arbor, New
Category: Cutoff Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-UCS-14
Northtech UCS-14 L or R Up Cut Saw Max cutting capacity: 1" x 11", 2" x 10", 3" x 9" 7.5HP motor, 3PH 230V with 24V magnetic controls 14" 100T Carbide tipped blade included 1" Saw arbor diameter Cycle operation: Pneumatically adjustable up to 78 cycles/minute Arbor RPM: 4260RPM Table size: 25" x 23-1/4" Fence ...more
RT Machine has 8 more
listings in Cutoff Saws.
Dovetail Wood Joint Machines
15 Results
Dodds #DE-760H, Double End CNC Automatic English Drawer Dovetailer w/Notching, 7.75"-36" L x 1.75"-12" D x 0.3"-0.75" thick Product Size, 7.5 HP, 230/460 V
Category: Dovetail Wood Joint Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Dodds
Model: DE-760H
Dodds #DE-790CNC, Double End CNC Automatic English Drawer Dovetailer w/Trimming & Notching, 8.9"-42" L x 1.75"-12" D x 0.4"-1.75" thick Product Size, 7.5 HP, 230/460 V
Category: Dovetail Wood Joint Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Dodds
Model: DE-790CNC
Product length (left to right) 8-7/8" to 42" (8-7/8" length must be 6" wide for processing) Product depth (front to back) 1-3/4" to 12" Product thickness 7/16" to 1-3/4" Machine foot print 14'-4" wide x 14'-2" long (suggested area 18' x 18') Double end machine design Infeed gravity hopper part feeder ...more
Hoffman n #PU2-TL, Dovetail Router, 115 V., 33000 RPM, 12" max height, 2008
Category: Dovetail Wood Joint Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hoffman
Model: PU2-TL
Year: 2008
Free-Standing Automatic Dovetail Routing Machine Main Motor: 1,000 Watt Spindle Speed: 33,000 RPM Collet Size: 1/4" Maximum Routing Height: 7-1/2" Maximum Material Height: 12" Router Carriage Tilts + or - 45 Degrees Single Over-Head Pneumatic Hold-Down Manual Hand-Crank for Tilt & Horizontal Adjustment Table Size: ...more
Northtech #iDovetail24, CNC Dovetailer, 6 HP, 24k RPM, 24" max, new
Category: Dovetail Wood Joint Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: IDOVETAIL24
Northtech Model iDovetail24 4.2kw (6HP) driven spindle Programmable spindle controls with a maximum 24,000RPM Maximum processing width: 610mm (24") Tenon dimensions: See following profile mode specific Workable part dimensions: See following profile mode specific Spindle vertical adjustment: 100mm (4") servo ...more
Northtech #iDovetail30, CNC Dovetailer, 6 HP, 18k RPM, 30" max, new
Category: Dovetail Wood Joint Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: IDOVETAIL30
Northtech Model iDovetail30 CNC Dovetailer 4.2kw (6HP) powered spindle Programmable spindle controls with a maximum 18,000RPM Maximum processing width: 750mm (30") Tenon dimensions: See following profile mode specific Workable part dimensions: See following profile mode specific Spindle vertical adjustment: 100mm (4") ...more
RT Machine has 10 more
listings in Dovetail Wood Joint Machines.
Dowel Milling Machines
1 Result
Oliver #7660, Dowel Rod Milling Machine, 5 HP, 220 V., 3400 RPM, new
Category: Dowel Milling Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 7660
Oliver Model 7660 Dowel Rod Milling Machine Stock No. 7660.002 (5Hp & 2Hp 3Ph) Capable of Milling 10-60mm Diameter Dowels, Depending on Tooling Minimum Dowel Length: 330mm Cutterhead Motor: 5 HP, 220 V, 3 PH Feed Motor: 2 HP Cutterhead Speed: 3,400 RPM Feed Speeds: 10, 12, 14, or 15 m/min.
Dust Collectors
10 Results
5000 cfm Kufo #UFO-104H2, Dust Collector, 59.5 cu.ft Bag, 9.5" inlet diameter, 10 HP, 220/440 V., 3-Ph.
Category: Dust Collectors
Seller: RT Machine
Location: Hughesville, PA
Mfr: Kufo
Model: UFO-104H2
Motor 10HP; 3PH; 220/440 Volt Inlet Diameter 9.5" Air Volume ~5,000 CFM Bag Volume 59-1/2 Cu ft.
5000 cfm Northtech #NT-DC15SS, Dust Collector, 15 HP, 26-3/8" 9-blade impeller, 72 cloth 5" x 60" bags
Category: Dust Collectors
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-DC15SS
Northtech Model NT DC15SS Dust Collector Blower HP: 15HP Direct Drive Shaker HP: 1/2HP 26-3/8" 8-Blade Impeller Machine CFM Rating: 5000 Inlet Dust Port Size: 16" Round Outlet Dust Port Size: 12"x15" Filters: Seventy-Two 5"x60 Clothe Bags Bottom Bags: 22"x48".
5000 cfm, Kufo #UFO-104H2, Dust Collector, 9.5", 59-1/2 cu.ft., 10 HP, 220/440 V.
Category: Dust Collectors
Seller: RT Machine
Location: Hughesville, PA
Model: UFO-104H2
Motor 10HP; 3PH; 220/440 Volt Inlet Diameter 9.5" Air Volume ~5,000 CFM Bag Volume 59-1/2 Cu ft.
6200 CFM, Northtech #NT-2ST15XL, Dust Collector, 15 HP, 230/460 V., 3ph, 25" impeller, 39" x 103" upper bags, 35" cyclone, new
Category: Dust Collectors
Seller: RT Machine
Location: Hughesville, PA
Model: NT-2ST15XL
Cyclone style dust collectors use the speed of the air and the physics of centrifugal force to separate dust from the air A clean air mounted blower and steel cyclone design provides decades of dust separation without primary filter bags The 2ST-15 cyclone and filter bag are supported by a steel frame structure that ...more
8200 cfm, Northtech #NT-2ST20XL-RAL, Dust Collector, 20/21 HP, 230/460 V., 26" impeller, 35" diameter cyclones, new
Category: Dust Collectors
Seller: RT Machine
Location: Hughesville, PA
Model: NT-2ST20XL-RAL
This is a 20HP fan with a primary cyclone filter with a rotary are lock The natural cyclonic air flows allows clean air to pass through the center of the cyclone into the blower and through the secondary filter bags A clean air mounted blower and steel cyclone design provides decades of dust separation without primary ...more
RT Machine has 5 more
listings in Dust Collectors.
L & L Machinery #Du-All, Radio Frequency Gluer, Easel Style, 64" x 124" Platen Size, (11) Side & (21) Top Pressure Cylinders, 5 HP, 230/460 V
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: L & L
Model: DU-ALL
L & L Machinery Du-All Radio Frequency Gluer (Easel Style) Platen Size: 64" x 124" Hydraulic Top & Side-Pressure 11 Side Pressure Cylinders 21 Top Pressure Cylinders Hydraulic Unit: 5 HP, 230/460v, 3ph Controls Mounted to Hydraulic Unit Meters for Plate & Grid Double Palm Safety Control Serial #: 99-1158 ...more
L & L Machinery #GA-100, High Frequency Edge Gluing Press, 50" width x 100" L x 4.5" thick Gluing capacity, 60" width x 160"/109" L Tables, 480 V, 2017
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: L & L
Model: GA-100
Year: 2017
L&L Machinery Model GA-100 High Frequency Edge Gluing Press Gluing Capacity 50" Wide X 100" Long X 4.5" Thick Generator 20KW Infeed Lay-up Table: The loading area is 60" Wide X 160" Long with Pusher Fence Driven by 1HP Motor. When the Load is Completely in the Press the Carriage will Automatically Reverse and Return ...more
Ogden #SL3660-RFS-Protec-SL, Solid Wood Radio Frequency Gluing Machine, 36" x 60" x 2" Curing Area, 480 V
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ogden
Model: SL3660 RFS PROTEC SL
Ogden Model SL3660 RFS Protec SL Solid Wood Radio Frequency Gluing Machine Curing area: 36" x 60" x 2" thick. Clamping pressure is applied by multi-power (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders ...more
Radio Frequency Services #RFSN20S03A0300PC, RF Gluer, 50" x 120" x 2" thck Gluing capacity, (21) Hydraulic Cylinders, 5 HP, 230/460 V
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Radio Frequency Services
Model: RFSN20S03A0300PC
RFS Model RFSN20S03A0300PC Radio Frequency Gluer Gluing Capacity 50" x 120" X 2" Thick 15 Rear Hydraulic Clamping Cylinders 6 Right Side Hydraulic Cylinders Auto Cure Hydraulic Pump Unit w/ 5 HP 230/460v Motor 3 Phase Electric Total AMPS 70 Serial No. A2-789.
Rosenquist #700H-4.5, Radio Frequency Gluer, 44" x 96" Table, 44" x 88" Top Platen Size, 20" width Glue Roller, (14) Clamping Cylinders
Category: Edge Gluers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Rosenquist
Model: 700H 4.5
Rosenquist Model 700H 4.5 Radio Frequency Gluer Table Size: 44"x96" Top Platten Size: 44”x88" Generator 15KW 14 Clamping Cylinders 3 Top Pressure Cylinders 5 HP Hydraulic Unit Overhead Conveyorized Glue Applicator - 20"x14' Infeed 20" Wide Glue Roller 20"x9' Outfeed This is part of a plant liquidation ...more
RT Machine has 2 more
listings in Edge Gluers.
GreCon Dimter #X7.1.0, Control Cabinet, 3 Phase, 60 Hz, 4 HP, 15 Amps, 460 V
Category: Electrical Panels & Enclosures
Seller: RT Machine
Location: Hughesville, PA
Mfr: Dimter
Model: X7.1.0
Grecon Dimter X7.1.0 Control Cabinet Panel Supply: 460V 3Ph 60Hz Total Full Amp Draw - 7.84 Amps Max Amps - 15 Amps Total HP - 4HP.
Cantek #EM-12, Through-Feed End Matcher, 1.5"-12" width x 0.38"-1.38" thick Board Size Range, 10.63" min. Board length, 40 mm Spindle, (2) 5.5 HP, 7000 RPM
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cantek
Model: EM-12
Cantek Model Model EM-12 Through-Feed End Matcher Cutting Capacity: Min/Max Board Width: 1-1/2"(40mm) / 12" (300mm Min/Max Board Thickness: 3/8" (10mm)/ 1-3/8" (35mm) Min Board Length: 10-5/8" (270mm) Cutterheads: (2) Moving 5-1/2HP (4kW) Cutterheads Spindle Size: 40mm Spindle RPM: 7000RPM Spindle Travel: ~12-1/2" ...more
Friulmac #Randomat-E, Random Length End Matcher, 9.84" width x 1.18" thick max Work capacity, 6.3" min. Work length, 40 mm Spindle diameter, (2) 7.5 HP, 6800 RPM, 460 V
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: RANDOMAT-E
Friulmac Model Randomat E Random Length End Matcher End Matcher for the Continuous Feeding of Random Length Work Pieces Minimum Working Length: 160mm (6.3") Working Width: 30-250mm (1.18"-9.84") Working Thickness: 10-30mm (0.39"-1.18") Two 7-1/2 HP, 3ph Profiling Motors Spindle Speeds: 6,800 RPM Spindle Diameters: ...more
Friulmac #Randomat-E-T-Rex, End Profiling Machine, 9.8" width x 2" thick max Work capacity, 6.3" min. Work length, 6.3"/7.9" Cutter diameter, (2) 10 HP, 9000 RPM
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: RANDOMAT-E-T-REX
Friulmac Model Randomat E T-REX End Profiling Machine, w/ HSK Tool Holders and Automatic Tool Change Capabilities Material Dimensions: -- Length: 160mm (6.3") to Unlimited -- Width: 30mm (1.2") to 250mm (9.8") -- Thickness: 10mm (0.4") to 50mm (2") Working Units: Cutter Diameter: (Min/Max) 160mm (6.3") / 200mm (7.9") ...more
Northtech #NT-EM300, Linear End-Matcher, 10 HP, 460 V., 3ph, 1-1/2"-12" width, 3/8"-1-3/8" T, 11" + L, PLC, 75 FPM
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-EM300
Dual 10HP spindle motors 460V, 3PH, 60 HZ 12 CFM @ 90 PSI required (1) 6" Dust ports requiring 981 CFM @ point of extraction Width: 40mm - 300mm (1-1/2" - 12" Thickness: 8mm - 35mm (3/8" - 1-3/8" Length: 280mm (11" - unlimited Maximum Weight of Lumber: 32 lbs 40mm spindles inside precision bearing 1HP PLC controlled ...more
Friulmac #Randomat-Multirex, End Matcher, Stackable Spindles, 9000 RPM,
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Model: RANDOMAT-MULTIREX
Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over Two Profiling Motors: 10 HP (7.50KW) Two Tool Changer Motors: 0.5 HP (0.25KW) Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW) Central Conveyor Belt: 3/4 HP (0.55KW) Minimum Part Length: 4-7/8" (120mm) Minimum Part Width: ...more
Fabric Cutting Machinery
1 Result
Lectra #VT-FU-Q25-72, Multi-Ply Fabric Cutting Machine, Vector Q25, 6'72" W, 2022
Category: Fabric Cutting Machinery
Seller: RT Machine
Location: Hughesville, PA
Model: VT-FU-Q25-72
Year: 2022
2022 Lectra Q25 Multi-Ply Fabric Cutting Machine (Model VT-FU-Q25-72) Fabric-ply heights up to 1in (2.5cm). Effective width of 6ft / 72in (1.83m). Lectra Vector Q25 is a state-of-the-art low-ply fabric-cutting machine to enable manufacturers to cut small-quantity orders faster, with increased accuracy and at lower ...more
Forklifts
4 Results
3000 lb. Crown #RR3520-35, Electric Reach Fork Lift, 210" max. fork height
Category: Forklifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Crown
Model: RR3520-35
Crown Model RR3520-35 Electric Reach Forklift Lift Capacity 3000 lbs Max A.H. Capacity 1120 HR Rate 6 Max Fork Height 210” Battery Recently Replaced Comes with Charger Serial No. 1A168557.
3000 lb. Komatsu #FG15HT-15, Propane Forklift, 3 stage mast, sideshift
Category: Forklifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Komatsu
Model: FG15HT-15
Komatsu Model FG15HT-15 Forklift Propane Capacity 3,000lbs Three Stage Mast Side Shift Serial No. 323816A.
5900/6750 lb. Hyster #H70FT, Forklift, 181.9"/164.2" x 24" x 24" capacity
Category: Forklifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hyster
Model: H70FT
Hyster Model H70FT Forklift 5900 lbs @ 181.9"x24"x24" 6750 lbs @ 164.2"x24"x24" Total Vehicle Weight: 11,000 Lbs This is part of a total plant liquidation, please call for.
8000 lb. Sellick, Rough Terrain Forklift, 3-Cylinder Gas Engine, 163" 3-Stage Mast, Enclosed Cab
Category: Forklifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sellick
Sellick 8000 Lbs Rough Terrain Forklift 3 Cylinder Gas Engine 168" 3 Stage Mast Enclosed Cab This is part of a total plant liquidation, please call for.
1.75"/2.75" Mereen-Johnson #524-DC/SR4-J, Moveable Arbor Gang Rip Saw w/Scout 16' Optimizing Infeed, 2.6" x 24" Arbor, 1.75"/2.75" Cutting thickness, 75 HP, 460 V
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 524-DC/SR4-J
Mereen-Johnson Model 524-DC/SR4-J Moveable Arbor Gang Rip Saw w/ Scout 16' Optimizing Infeed 75HP Arbor Motor - 3600RPM Arbor size: 2-9/16" x 24" w/ 1/2"x1/8" Double Keyway Cutting Thickness: 1-3/4" w/ 12" Blade, 2-3/4" w/ 14" Blade Top/Bottom Anti-Kickback Fingers (4) 4" Pneumatic Hold-down Rolls (#1#2,and #4 - ...more
2.36"/5.9" Wintersteiger #DSG-150/201-Eco, Thin Cutting Frame Saw, 2.36"/5.9" Cutting width, 11.81" min. Length, 1-5 FPM, 450 SPM, 15 HP
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Wintersteiger
Model: DSG-150/201-ECO
Wintersteiger DSG 150/201 Eco Thin Cutting Frame Saw Side and center guides are equipped to saw two blocks simultaneously Feed speed 1-5 FPM 450 Strokes / min Cutting Height & Width. Cutting width (side guide) 60 mm (2.36")150 mm (5.9") Center guide 2 channels max, 72.5 mm (2.85) using 7.5 mm guide or with (5) ...more
2.5" Mereen-Johnson #524-DC/SR4, Select-A-Rip Multiple Rip Saw w/ Scout Infeed, 24" Arbor Space, 12"/14" Tooling, (4) Moving & (1) Fixed Blades, 75 HP, 2008
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 524-DC/SR4
Year: 2008
Mereen-Johnson Model 524-DC/SR-4 Moving Blade Gang Rip Saw w/Mereen-Johnson Rip Navigator Scout Optimizing System Rip Saw is Set up for Four (4) Select Saw (Moving) Blades and One Fixed “Center-Splitter” Blade 24” Arbor Space Thickness to 1-1/2" with 12" Tooling or 2-1/2" Using 14" Tooling Arbor ...more
Mereen-Johnson #524-DC/SR2, Gang Rip Saw, 2.5" bore, 26" chain, 75 HP arbor motor, 30-235 FPM feed, 480 V., 3ph, AS IS
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Model: 524-DC/SR2
Mereen-Johnson Model 524-DC/SR2 Gang Rip Saw Being offered in as-is condition; moving blade drives & actuators need to be replaced Arbor Motor 75HP 3600 RPM 480V 26" Chain Width 2.5" Bore Size Feed Motor 3HP 480V 30-235 FT/MIN Feed Speed Power Adjust Pressure Head (2) Rows Of Kick Backs Fingers (1) Upper and (1) ...more
2.6" Mereen-Johnson #312-DC, Fixed-Arbor Gang Rip Saw w/TwistLock Collars, 12" L Arbor, 6" Throat, 12" width x 3" thick max Board Size, 50 HP, 2008
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 312-DC
Year: 2008
Mereen Johnson Model 312-DC Fixed-Arbor Gang Rip Saw with Four TwistLock Collars Arbor Motor: 50HP Arbor Speed: 3,600 RPM Arbor Size: 2-9/16" with Two 1/2" Keyways Arbor Length: 12" Max Board Width: 12" Max Board Thickness: 3" 30" Minimum Length Glue Joint Accuracy 22" Minimum Length For Bust Up Only 6" Throat Feed ...more
RT Machine has 15 more
listings in Gang Rip Saws.
Glue & Dowel Insertion Machines
3 Results
Biesse #FTT-800-R8+RD, Flexible Drilling Routing Dowel Insertion Line, Automatic Thru-Feed
Category: Glue & Dowel Insertion Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Biesse
Model: FTT-800-R8+RD
BIESSE+ RBO Model:FTT 800 + FTT 800 R8 + RD, CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with ...more
Homag #ABD050, Glue & Dowel Machine, 31.5" x 49.2" max, 2.36" thick max, 7500 RPM, 2017
Category: Glue & Dowel Insertion Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: ABD050
Year: 2017
2017 Homag ABD050 Bore, Glue, and Dowel Machine Supported Workpiece length (min/max): 20 / 1250 mm (0.79"/ 49.2") Workpiece width (min/max): 50 / 800 mm (1.97" / 31.5") Workpiece thickness (min/max): 10 / 60 mm (0.39" / 2.36") Vertical Drilling Thickness (min/max): 10 / 30mm (0.39" / 1.25") Horizontal spindle Qty.: 1 ...more
Weeke #Optimat-ABD050, Boring & Dowel Insertion Machine, 49.2" L x 31.5" width x 2.36" thick max Workpiece Size, 0.3" 1.2"/1.4" L Dowel, 7500 RPM, 2013
Category: Glue & Dowel Insertion Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weeke
Model: OPTIMAT-ABD050
Year: 2013
Supported workpiece length (min/max): 20 / 1250 mm (0.79"/ 49.2") Workpiece width (min/max): 50 / 800 mm (1.97" / 31.5") Workpiece thickness (min/max): 10 / 60 mm (0.39" / 2.36") Vertical Drilling Thickness (min/max): 10 / 30mm (0.39" / 1.25") Horizontal spindle Qty.: 1 Rotational spindle speed: max. 7500 rpm Drill ...more
Black Brothers #22-D-875, Top & Bottom Glue Spreader, 74" Width capacity, 8.75" diameter Applicator Roll, 88 FPM, 1 HP
Category: Glue Spreaders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Model: 22-D 875
Black Brothers Model 22-D 875 74" Top & Bottom Glue Spreader Width Capacity: 74" Top Elevator Style Glue Spreader (Constant Pass-Line) Main Motor: 1 HP, 3ph Feed Speed: 88 FPM Grooved Rubber Covered Applicator Rolls Applicator Roll Diameter: 8-3/4" Smooth, Hard Rubber Covered Doctor Rolls Thickness Adjustment via ...more
Black Brothers #22D-875, Top & Bottom Glue Spreader, 74" Width capacity, 8.75" diameter Applicator Roll, 1.5 HP, 480 V
Category: Glue Spreaders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Model: 22D-875
Black Brothers Model 22D-875, 74" Top & Bottom Glue Spreader Width Capacity: 74" Grooved, Rubber-Covered Applicator Rolls Applicator Roll Diameters: 8.75" Main Motor: 1.5 HP, 208-230/460v, 3ph Hard Rubber-Covered Doctor Rolls Bottom roll adjustment Currently 480v, 3ph Located in Hortonville, WI.
Black Brothers #775, Glue Spreader, 68" Width capacity, 7.75" Glue Rolls, 32" x 82" Glue Pan, 2 HP, 230 V
Category: Glue Spreaders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Model: 775
Black Brothers Model 775 Glue Spreader In the process of being reconditioned Width Capacity: 68" 7-3/4" Glue Rolls 12 Groves per inch Hard, Smooth, Rubber Covered Doctor Rolls. Top Elevator (Constant Pass-Line) Chain Driven Rolls 2Hp Drive Motor 32"x82" Glue Pan Push Button Controls Current Voltage: 230v SN: 189783.
Black Brothers #775, Glue Spreader, 68" Width capacity, 4.5" max Opening, 7.75" Applicator Roll, 2 HP, 480 V
Category: Glue Spreaders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Model: 775
Black Brothers Model 775 68" Glue Spreader Running Glue Spreader, offered in As-is Condition. This machine could use a good cleaning and some repairs, but it runs as it is. If you prefer a refurbished machine, please take a look at our stock #35177! Width Capacity: 68" Maximum Opening: 4.5" Grooved Rubber Covered ...more
Black Brothers #775, Glue Spreader Spare Rolls, 68"
Category: Glue Spreaders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Model: 775
RT Machine has 3 more
listings in Glue Spreaders.
Horizontal Band Saws
1 Result
36" Northfield, Horizontal Band Saw, w/ Tilting Blade, 10 HP, 900 RPM, NEMA 12, 36" x 2" wheel
Category: Horizontal Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Northfield Horizontal 36" Band Saw with Tilting Blade rmation: For angle cutting, roofing buildup material used for directing waterflow on flat roofs 36" x 2" steel disc wheels with demountable steel reinforced tires heavy duty quills 10 HP belt drive 900 RPM automatic electric brakes both wheels blade tilts 10 in ...more
Horizontal Boring Machines
1 Result
Sicotte #J-20-7, Horizontal Boring Machine, 6" stroke, 12" x 84" table,
Category: Horizontal Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sicotte
Model: J207
Sicotte Model J-20-7 Horizontal Boring Machine This unit has been tested in our shop, and is in running condition. It is available for purchase as-is for a lower price, or repaired through our shop. Please ask your salesperson for the test report. Table Size: 12" x 84" Boring Area 2-1/2" x 72" Table Adjustment 2-1/2" ...more
Horizontal CNC Machining Centers
1 Result
Pillar #2S, horizontal machining center, 10" saw, 90-110 psi, 350 CFM, new
Category: Horizontal CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Pillar
Model: 2S
Pillar Model 2S Horizontal CNC The 2S is a multi-axis, mulit-functional CNC horizontal machine. It is designed to size and square edge glued panels safely and accurately. The 2S can also be Pillar-Linked to any order entry program to scan barcodes. This will virtually eliminate the need for the operator to do anything ...more
Omec #SA-600, Automatic Hot Stamping Press, 700 CPH, cnc, new
Category: Hot Stamping Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: SA-600
Omec Model SA 600 Automatic Hot Stamping Press Technical Data: On board machine installed power: 8.5 Kw Working pressure: 0.7 MPascal Stamping pressure: 120 MPascal/kg Travel of the pressing head: 60 Mm Nominal cycles/hour: 700 n/h Workpiece Limits Draw Length: min. 80mm max. 400mm Draw Width: min. 200mm max. 600mm ...more
Industrial Woodworking Upcut Saw
1 Result
Cantek #PCS14R, Right Hand Upcut Saw, 5 HP, 1" arbor, 95 CPM, 4100 RPM, 2017
Category: Industrial Woodworking Upcut Saw
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cantek
Model: PCS14R
Year: 2017
Cantek Model PCS14R Upcut Saw Max cutting capacity: 1" x 10", 2" x 10", 2" x 9”, 3” x 8" 5HP motor, 3PH 230V with 24V magnetic controls 1" Saw arbor diameter Cycle operation: Pneumatically adjustable up to 95 cycles/minute Arbor RPM: 4100 RPM Table size: 25" x 23-1/4" Dust Exhaust Diameter 4” Serial ...more
Initial and Double Pinch Plate Bending Rolls
2 Results
5.2' x 2" Evans #PR-207, Pinch Roller, w/ Segmented Bottom, 50-100 psi, 50 FPM, 120 V., 0.5 HP, new
Seller: RT Machine
Location: Hughesville, PA
Mfr: Evans
Model: PR-207
Evans Model 0207 Pinch Roller 62" Capacity with Segmented Bottom Roller 62" Capacity Pinch Roller For Countertops Solid Top Roller and Segmented Bottom Rollers Safety Gates on In-Feed and Out-Feed Adjustable Pressure from 50-100 PSI Forward and Reverse Feed Directions Spacers Provided for Desired Thickness Maximum ...more
5.2' x 2" Evans #PR-257, Pinch Roller, w/ Segmented Bottom, 100 psi, 45 FPM, 110 V., 0.5 HP, new
Seller: RT Machine
Location: Hughesville, PA
Mfr: Evans
Model: PR-257
Evans Model PR 257, 62" Pinch Roller with Solid Rollers Pinch Roller 62" Capacity with Solid Top and Bottom Rollers Max.Width: 62" Bonds at 45 Feet Per Minute Safety Gates on in-feed and out-feed sides Fast, Accurate Thickness Adjustment Works with Contact Adhesive or PVA (white glue) Heavy Duty Construction 1/2 Hp, 8 ...more
UE Systems #UP-10000SD, Ultrasonic Bearing & Leak Detector, 20kHz-100kHz Frequency
Category: Inspection Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ue Systems
Model: UP-10000SD
UE Systems Ultrasonic Bearing and Leak Detector (Model UP-10000SD) ULTRAPROBE 10,000 COMPLETE ULTRASONIC ASSET MANAGEMENT SYSTEM FOR CONDITION MONITORING. The Ultraprobe 10,000 is an advanced ultrasonic instrument that can be used for all ultrasound applications. Ideally suited for condition monitoring of bearings and ...more
Hasko #HSRF-V2-720, High Speed Scanning/Optimizing System
Category: Inspection Equipment
Seller: RT Machine
Location: Hughesville, PA
Model: HSRF-V2-720
Hasko High Speed Scanning / Feeding System for Gang Rip Saw Process Speed 25 (8’ long) Boards Per Minute Maximum Board Width 20” Minimum Board Width 3” Maximum Board Length 17’ Minimum Board Length 48” Maximum Board Thickness 1-3/4” Minimum Board Thickness 1/2” Maximum Board ...more
32.5" Black Brothers, Reverse Roller Coat Laminator, 36.75" Constant Pass-Line, 6.5" Chrome & 8.5" Rubber Rolls, 7.5 HP, 200-230/460 V
Category: Laminating Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Black Brothers
Black Brothers 32" Reverse Roller Coat Laminator Constant Pass-Line: 36-3/4" 32.5 Width Capacity 6-1/2" Chrome Roll 8-1/2" Rubber Roll Outfeed Roller Conveyor Top Elevator w/ Readout 200-230/460V 3 phase (Currently 220v) 7.5 HP Motor Includes 1 Spare Roller.
59" Barberan #Ecoline-1700-H-SI, Laminating System, 1.97" max Thickness capacity, (2) 7" Panel Brush, (2) 9.6" diameter & (2) 6.9" diameter Glue Spreader Rolls
Category: Laminating Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Barberan
Model: ECOLINE-1700-H-SI
Barberan Model Ecoline-1700-H-SI Laminating System Material Capacity: Min Work Piece Length: 1500mm Max Work Piece Width: 1500mm Min/Max Thickness: 3mm/50mm System Layout: LP-ECO-1700 Panel Brush Machine (2) 180mm (Dia.) Brush Heads Powered by 0.75kW Motors EN-R-4-1700 Panel Top & Bottom Glue Spreader (2) 245mm ...more
Vacutherm #VP1000, Kiln, Top Load System, 1000 Board ft. Load capacity, 100000 BTU Heating, 1.98 gallon Heat Plate
Category: Lumber Dry Kilns
Seller: RT Machine
Location: Hughesville, PA
Mfr: Vacutherm
Model: VP1000
Vacutherm VP-1000 Kiln Load Capacity - 1000 Board Feet (2.36m3) Top Load System Heating Requirement - 100,000 BTU Heat Plate - 1.98gal per Plate TouchDRY Kiln Controls.
Material Handling Equipment
2 Results
Friulmac #Dualfeed, Double-End Trim & Moulder Feeder, 40 pcs/min., 4.33" width x 59" L x 3.15" thick max Work capacity, 15.7" Blade diameter, (2) 5.36 HP
Category: Material Handling Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: DUALFEED
The Dualfeed Precision End Trims Work Pieces and Automatically Feeds Them to a Moulder Work pieces vertical hopper-feeder, adjustable in width, provided with pneumatic equalizer for the correct positioning of the parts before the entrance into the working stations; max. tolerance allowed in the work pieces length: 70 ...more
Lineberry, Wooden Factory Carts, LOTS, 27" x 48", (100 available)
Category: Material Handling Equipment
Seller: RT Machine
Location: Hughesville, PA
Lineberry Factory Carts Top Size 27" x 48" Height 16" One large 12" cast iron wheel on each side and one 6-inch cast iron swiveling caster wheel on each end Weight Capacity 3000 lbs Quantity of 70 Carts available SELLING AT $70 EACH IN LARGE QUANTITIES ONLY!! These carts are part of a total plant liquidation, Please ...more
Material Handling for Woodworking
19 Results
Automated Lumber Handling, Infeed Package Deck Chains for 16' Lumber, 3-Chain, 30.67' Long & 5' Apart Chains
Category: Material Handling for Woodworking
Seller: RT Machine
Location: Hughesville, PA
Mfr: Automated Lumber Handling
ALH Infeed Package Deck Chain for 16' Lumber Three Chains - 5' Apart and 30'8" Long This item is part of a liquidation; buyer will be responsible for removal costs & arrangements. Note that the other ALH material handling items around this unit are also available for sale.
Automated Lumber Handling, 6-Strand Chain Deck w/Pins Stops & Board Dealer, Flat Top Chains, 10' L x 12.5' width x 7' H Chains, 2 HP Motor, 230/460 V
Category: Material Handling for Woodworking
Seller: RT Machine
Location: Hughesville, PA
Mfr: Automated Lumber Handling
Automated Lumber Handling Six (6) Strand Chain Deck with Board Dealer Flat Top Chains Six (6) Strands with the following center 20", 18", 36", 34", 38" Motor 2HP; 3PH; 230/460 Volt Chain Section is 10' Long X 12.5' Wide X 84" High Overall Size of Framework 10' x 20' One Set of Pin Stops at the End with ...more
Automated Lumber Handling, Tilt Hoist & Material Handling for Planer/Rip Line, 10.9' width x 25' L x 4.5' H Package Deck, 151" width x 103" H Tilt Hoist
Category: Material Handling for Woodworking
Seller: RT Machine
Location: Hughesville, PA
Mfr: Automated Lumber Handling
LH Three Strand Live Chain Infeed Package Deck 131" Wide x 25 ft Long X 53-1/2" High Three(3) 2-1/4" Wide Flat Top Chain Strands Chain Spacing 60" Drive Motor 15 HP ALH Lumber Break Down Tilt Hoist 151" Wide x 103" High Tilt Hoist Arms are 5" Wide x 48" Long Two (2) Hydraulic Cylinder to Lift Pack and Two(2) to Tilt ...more
Automated Lumber Handling, 6-Strand Chain Deck, w/Pneumatic Pin Stop, 12.67' Long
Category: Material Handling for Woodworking
Seller: RT Machine
Location: Hughesville, PA
Mfr: Automated Lumber Handling
Chain Deck Six (6) Chains - Spaced at 23",24",24", 48", and 24" 12'-8" Long Pneumatic Pin Stop This item is part of a liquidation; buyer will be responsible for removal costs & arrangements. Note that the other ALH material handling items around this unit are also available for sale.
Automated Lumber Handling, Pre-Breakup Incline Chain Deck, 6-Chain, 6.625' Long, 7.5 HP Motor
Category: Material Handling for Woodworking
Seller: RT Machine
Location: Hughesville, PA
Mfr: Automated Lumber Handling
Pre-Breakup Incline Section Six (6) Chains Spaced 24",30",24",24", and 48" Apart 6' 7.5" Long Powered by a 7.5HP Motor This item is part of a liquidation; buyer will be responsible for removal costs & arrangements. Note that the other ALH material handling items around this unit are also available for sale.
RT Machine has 14 more
listings in Material Handling for Woodworking.
Material Lifts - (Drum, Pallet, Vacuum)
1 Result
150 lb. Anver, Vacuum Lift, w/ Gorbel Gantry crane, 32' hose, 14' span x 12' height
Seller: RT Machine
Location: Hughesville, PA
Mfr: Anver
Anver Vacuum Lift with Gorbel Gantry Crane Lifting Capacity 150 lbs. Vacuum pump motor 3 Phase, 230 volt, 72 db noise level Lift tube assembly -- 200 mm OK with extended handle In line filtration system Suction Hose - 32' Two(2) suction cups approximately 6" x 15" on an approximately 3' adjustable spread bar ...more
Miscellaneous Packaging Equipment
1 Result
Dession #DS-320LS, Hardware Packing Machine, automatic vertical
Category: Miscellaneous Packaging Equipment
Seller: RT Machine
Location: Hughesville, PA
Model: DESSION #DS-320LS
Dession Model DS-320LS Hardware Packing Machine. Automatic vertical packing machine primarily designed for high-accuracy counting and packaging of hardware items such as bolts, nuts, screws, and nails.
37" Moulding Brush Sander, Northtech #NT-MBS37-2T, 2 head, 12" x 37" ea, 10-60 FPM, 500-900 RPM brushes
Category: Miscellaneous Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: 37 MOULDING BRUSH SANDER
Northtech Model NT-MBS37-2T 37" (2) Top Head Moulding Brush Sander Sanding configuration: (1) Top 12" x 37" brush head with reinforced sanding media (1) Top 12" x 37" brush head with reinforced sanding media Working width: Up to 37" Working thickness: 3/8" - 4" Min working length: 20" 1HP inverter feed speed control ...more
4 head moulding brush san, Northtech #NT-MBS12-2TR1OL-EL, 5.5 HP, 6" max thick, 25-105 FPM, 230 V., 3ph
Category: Miscellaneous Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: 4 HEAD MOULDING BRUSH SAN
Northtech NT-MBS12-2T1R1OL-EL Four Head Moulding Brush Sander Machine HP: 5-1/2 HP Direct Drive Sanding Heads Configuration: 2 Top, 1 Left, 1 Right 1st Head: 1-1/2 HP 10x13" Sanding Head 740/1760 RPM 2nd Head: 1-1/2 HP 10x13" Sanding Head 740/1760 RPM 3rd Head: 3/4 HP 10"x7" Sanding Head 740/1760 RPM 4th Head: 3/4 HP ...more
13.78" Alfamachine #TA-350, Double Miter Saw, 10.83" Stroke, 3.15" cutting H, 1.18" Bore, 2.2 HP, 3000 RPM
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Model: TA-350
Alfamacchine Model TA-350 Double Miter Saw Saw Blade Motors - (2) x 1.7 kW (2.2HP) Saw Blade Size - 350mm Dia (13.78") Saw Blade Bore - 30mm Dia (1.18") Saw Blade Speed - 3000RPM Saw Blade Stroke - 275mm (10.83") Max Cutting Height - 80mm (3.15") Max Cutting Width - 80mm (3.15”) Vertical Feeder for Lengths up to ...more
Northtech #NT-DMS14-AS, Aluminum Double Miter Saw, 14" blade, 2 HP, 3600 RPM, 4" x 4", New
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-DMS14-AS
Northtech NT-DMS14-AS 14" Double Miter Saw Cutting Angle: (2) 45 Degrees Cutting Width: 4" (100mm) Cutting Height: 4" (100mm) Minimum Working Length: 6-1/4" Minimum Working Width: 3/4" wide (2) 14"x1"x3mm Tungsten Carbide Tip Blades (2) 2HP 3600RPM Blade Motors Swing Arm cutting stroke Table Height: 33" (830mm0 ...more
Atech #Norma-02-SA, Semi-Automatic Double Head Miter Saw, 16" blade, 3400 RPM, 3 HP, digital read out, New
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Atech
Model: NORMA-02-SA
A-tech Norma-02 SA Semi-Automatic Double Head Miter Saw 16" (400mm) with Digital Read-out Double head miter saw with circular saw blades designed for double head, single head and straight or angular cutting of PVC, aluminum and wooden profiles. The saw blade movement is hydro-pneumatically, and it is possible to ...more
Atech #SKAT-06, Bench Top Miter Saw, 3 HP, 3000 RPM, 16" blade, 220 V., New
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Atech
Model: SKAT-06
Atech Model SKAT-06 16" Bench Top Miter Saw. SKAT-06 P is a heavy duty bench top miter saw with a 16" (400 mm) blade. It has 2 main parts; a 400 mm (16") carbide tipped saw blade and twin horizontal clamps. There are also infeed & outfeed tables among optional equipment. Moreover, SKAT-06 P has heavy duty ...more
Atech #SKAT-06-M, Manual Miter Saw, 3 HP, 3000 RPM, 16" blade, 220 V., New
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Atech
Model: SKAT-06-M
Atech Model SKAT-06 M Heavy Duty 16" (400mm) Manual Miter Saw Saw Motor: 3HP (2.2kW) Saw Blade Diameter: 16" (400mm) Saw Blade Bore: 30-32mm Saw Blade RPM: 3000RPM Air Requirement: 90-120 Psi, 0.2 CFM Pneumatic Horizontal Clamps 220v 1Ph 60Hz.
RT Machine has 11 more
listings in Miter Saws.
Northtech #NT-PN14, Panel Notcher, 5/5 HP, 1" arbor, 3100 RPM, 14" blade, 7" max thick, 7" stroke, 5 CPM, new
Category: Notching Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-PN14
Northtech Model NT-PN14 Panel Notcher (2) 5HP Arbor Motors Arbor Size: 1" Arbor Speed: 3100RPM Blade Size: 14" Tungsten Carbide Tipped, 120 Tooth Minimum Working Width: 1-1/8" x 1-1/8" Maximum Working Width: 5-1/2" x 5-1/2" Max Working Thickness: 7" Vertical Travel: 7" (2) 4" Ports requiring 436 CFM at each point of ...more
Optimizing Cross-Cut Saws
15 Results
Friulmac #Dualfeed-2.5, Automatic Double Crosscut saw & Moulder Feeder, 5.36 HP, 3750 RPM, 1000 CFM, spindle 1.2"
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: DUALFEED-2.5
Friulmac Model Dualfeed 2.5 Automatic Double Crosscut saw & Moulder Feeder Working Units on each side Trimming Unit: Motor Power: 4kW (5.36HP) Spindle RPM: 3750RPM Spindle Diameter: 30mm Max Blade Diameter: 250mm Adjustments: In/Out: Manual Up/Down: Manual Dust Extraction: 1+1 Dust Ports with 100mm outside ...more
Mereen-Johnson #312-DC/SR2, Rip Navigator Tracker, Optimizing, 111 FPM feed, 17' 6" max stock, New
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen Johnson
Model: 312-DC/SR2
Mereen-Johnson Model 312-DC/SR2 Navigator Scout Rip Optimizing S Arranged to Receive 17'-6" Maximum Length Boards from Scissors Lift Manually placed on Board Dealer Arms Individual Boards are Automatically Dealt onto Lateral Chains and Conveyed to a Board Stop Board Stop Queues Boards for Advancement to ...more
Northtech #NT-ADS100A, Defecting Saw Line, 10 HP, TEFC, 2.5 HP, 25-256 FPM, 18" blade, 4000 RPM, 1.125" arbor, new
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ADS100A
Northtech Model NT-ADS100A Defecting Saw Line High speed defecting saw Saw: 10HP high efficiency TEFC motor Feed motor: 2kw (2.5HP) Saw arbor speed: Standard: 18" saw blade: 4000RPM Feed speed: 25 - 256FPM Up to 80 cuts/min 1.2m (4') infeed roller table included 1m (3') outfeed table Crayon Marking Defect Saw ...more
Omga #Optima-120-4200-CE, Push Feed Optimizing & Defecting Cut-off Saw, 25-35 cuts/min., 12" width x 4.3" thick max Piece Size, 18" diameter Saw Blade, 208 V, 2021
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omga
Model: OPTIMA 120 4200 CE
Year: 2021
Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw Note: This machine will require a rigger for removal, at the buyer's expense 208v, 7.38 kW, 60 Hz, 3PH Maximum mm: 500 PH Minimum mm: 400 PH Bore mm: 35 mm Maximum piece thickness: 4-5/16" Maximum piece width: 12" Maximum infeed length: ...more
Omga #T2020-NC-Elite, Throughfeed Optimizing Saw, 80-90 cuts/min., 12.6" width x 4.75" thick max Work Size, 7.5 HP
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omga
Model: T2020 NC ELITE
2020 Omga T2020 NC Elite Through Feed Optimizing Chop Saw! Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal Particularly suitable for high production requirements given its very high maximum feed speed of 800 FPM The set of 7 top pressure rollers are able to ...more
RT Machine has 10 more
listings in Optimizing Cross-Cut Saws.
Northtech #NT-555, Overarm Pin Router, 3-3/8" stroke, 3/5 HP, w/ tools, new
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-555
Northtech model NT-555 Overarm Pin Router s: Spindle Motor: available 3 HP single-phase 230V only, or 5 HP three-phase 230V only Spindle Speed: 18,000 RPM for single-phase model, 10,000 and 18,000 RPM for three-phase model Spindle Travel: pneumatic 3-3/8" vertical stroke Forward Tilting Table: 0 to 45-degrees Three ...more
Northtech #NT-750-10, Pneumatic Overarm Router, 10 HP, 8k/16k RPM, 3-3/4" travel, 29-1/2" throat, w/ tools, new
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-750-10
Northtech model NT 750-10 Overarm Pin Router s and : Spindle Motor: 10HP 230V 3Ph Spindle Speeds: (2), 8,000 and 16,000 RPM Spindle Travel: 3-3/4" Chuck to Table: max. 9" Throat Clearance: 29-1/2" Table Size: 36" x 40" Table Travel: 7-1/2" Table Tilt: 45-degrees, front downward Micrometric Table Raise: 1/32" (1mm) per ...more
Onsrud #W-1124, Overarm Pin Router, 36" x 26" Table, 10000-20000 RPM, 3.5" spindle travel, 24" Throat, 7.5 HP
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: W-1124
Onsrud Model 1124 Overarm Pin Router Table Size: 36" x 26" Spindle Speeds: 10,000 - 20,000 RPM Throat Size: 24" Manual Hand-Crank for Table Raise/Lower Spindle Travel: Adjustable from 0" - 3-1/2" Spindle Motor: Approx. 7-1/2 HP Foot Pedal Operation Serial No. 8857 NOTE THAT THERE IS AN ELECTRICAL ISSUE WITH THIS ...more
SCMI #R9, Overarm Pin Router, 8.85 HP, 230 V., 3ph, 35" x 31" table
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Scmi
Model: R9
SCMI Model R9 Overarm Pin Router Main Motor: 8.85 HP, 230/460v, 3ph Table Size: 35" x 31" Foot Pedal Control Manual Hand-Crank for Table Height Reference #: 090607 Serial #: AB/50050 This is a part of a total plant liquidation, Please call for.
Evans #2480, Over Arm Router, 3 HP, 12k-21k RPM, 100 psi, 30" x 48" table, new
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Model: 2480
Evans Model 2480 Over Arm Router Selected s: Cutting Surface: 30" x 48" Spindle Motor: 3 HP & Variable Speed from 12,000 RPM to 21,000 RPM Air Requirement: 100 PSI Compact heavy duty system for quickly cutting sink holes in countertopsHigh-frequency router is rated for continuous use and cutting solid core ...more
Pallet Nailers and Pallet Equipment
1 Result
Northtech #NT-PAS4852-8-2TBL, Pallet Assembly System, 3 & 4 runners, 8 CN70 MAX nail guns, new
Category: Pallet Nailers and Pallet Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-PAS4852-8-2TBL
Pallet Assembly System with a two table quick loading carriage system, independently traveling top & bottom guns, stacker and (2) full stack discharge conveyor Over 800 pallets/8hr shift with 2 workers 30 minute changeovers when changing jigs, or under 5 minutes when changing tables Top and bottom nail gun ...more
Pallet Racking
Category: Pallet Racks
Seller: RT Machine
Location: Hughesville, PA
Large Quantity of Pallet Racking Most is Interlake Tear Drop Style 8’ Tall Uprights 77 Pieces 10’ Uprights 4 Pieces 14’ Uprights 5 Pieces 16’ Uprights 75 Pieces 8’ Uprights that are Not Tear Drop 46 Cross Beams were not Counted Includes Wire Decking as Photographed Racking is Still Set Up ...more
Smart Machine Tool Wasp #S300, Pallet Wrapping Machine, 25-30 loads/hr., 94.5" Wrapping height, 78.7" Turntable, 19.7" Standard Film width, 1.5 HP, 0-15 RPM, 2017
Category: Pallet Wrappers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Smart Machine Tool
Model: S300
Year: 2017
2017 Machine, Essentially Un-Used Max. Wrapping Speed: 25-30 Loads/Hour Max. Wrapping Height: 2,400mm Turntable Speed: 0 - 15 RPM Turntable Size: 2,000mm Turntable Drive: 1.5 HP Max. Load Weight: 3,000 kg Standard Film Width: 500mm Rigging, Loading, Delivery, etc. can be priced based on your needs. Please contact us ...more
Hendrick #HM3, Horizontal Beam Saw, 15 HP, variable speed carriage, 8' & 10' cuts, new
Category: Panel Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hendrick
Model: HM3
The HM3 Horizontal Panel Saw is a powerful machine ideal for businesses looking for an alternative to expensive sliding table saws. Experience the difference of an automatic, safer, and more powerful machine. Making cuts and adjusting cutting speeds is effortlessly done with the push of a button. Efficiently load and ...more
Hendrick #SPN1, Vertical Beam Saw, 6'/8'/10' cuts, 7.5 HP, variable speed carriage, new
Category: Panel Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hendrick
Model: SPN1
The SPN1 stands tall when it comes to precision, using a unique full-length pneumatic pressure beam to clamp stacked panels. The fully enclosed saw blade enhances dust collection and safety while providing superior cut quality in all three of its cut modes: top-to-bottom, scoring, and reciprocating. Reduce man-hours ...more
Holzma #HPL-380/38/22, Panel Saw, 3.7" projection, 149.6" stroke, 393.7 FPM
Category: Panel Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Holzma
Model: HPL-380/38/22
Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade ...more
Homag #SawTeq-B-400, Rear-Load Panel Saw, 37.8 HP, 492 FPM, 480 V., 3ph, 450mm blade, 2022
Category: Panel Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: SAWTEQ-B-400
Year: 2022
Check out this extremely late model saw, with only a couple weeks worth of hours on the meter! 2022 Homag SawTeq B-400, available immediately! HOMAG SAWTEQ B-400 (HPL 400) US Edition is a flexible saw center. This CNC controlled machine s fast, simple programming coupled with high operating speeds to meet today's ...more
Homag #SAWTEQ-B-400-ProfiLine, Rear Load Panel Saw, 492 FPM, 4.9" blade, 480 V., 3ph, 2021
Category: Panel Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: SAWTEQ-B-400-PROFILINE
Year: 2021
Homag SAWTEQ B-400 ProfiLine HPL 400/38/16 Rear Load Panel Saw Maximum Panel Size: 62.99" X 145.67 (1,600mm x 3,700mm) Cutting Length: 149.6" (3,800mm) Three Air Tables Main Saw Blade Diameter: 450mm Scoring Saw Blade Diameter: 180mm Main Saw Motor: 37.8 HP Blade Projection: 4.9" (125mm) Saw Carriage Speed Forward: 0 ...more
RT Machine has 9 more
listings in Panel Saws.
G &P #EPN, Pedestal Grinder, 35" spindle L, 2 HP, 1200 RPM, 208-230/460 V., 3-Ph.
Category: Pedestal Grinders
Seller: RT Machine
Location: Hughesville, PA
Model: EPN
Grinding & Polishing Model EPN 2 HP; 3PH; 208-230/460 Volt Motor Two (2) 1-1/4" Daim. x 11" Long Spindles Speed, 1200 RPM Spindle Height from Floor 39" Total Spindle Length 35" Serial No. N/A This is a part of a total plant liquidation, Please call for.
Motorized Pinch Roll, 32" width x 12" diameter Bottom & Top Steel Rolls
Category: Pinch Roller
Seller: RT Machine
Location: Hughesville, PA
Motorized Pinch Roll, Manufacturer Unknown Pinch Roll Designed to be Placed Behind a High Speed Planer or Gang Rip Saw Bottom Steel Roll 32" Wide x 12" Diameter Bottom Roll Driven 2HP Motor Top Steel Roll 32" Wide x 12" Diameter Top Roll is Idle with shocks to Pinch Material.
16' Belt Conveyor & Pinch Roller
Category: Pinch Roller
Seller: RT Machine
Location: Hughesville, PA
16ft Belt Conveyor with Pinch Roll Conveyor Size 16ft x 24inches Powered by 2Hp Motor - Chain Driven 24" Pinch Roll with Airbag Pressure Unit w/ Regulator.
Weinig #Rondamat-960-C+, Profile Grinder, 1500-3000 RPM, 2015
Category: Profile Grinders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Model: RONDAMAT-960-C+
Year: 2015
Weinig Model Randamat 960 Profile Grinder Tool Length(Max): 9.5" Tool Diameter (Min/Max): 3.9"/11.8" Grinding Wheel: Profile Cutters Head Diameter (Min/Max): 5.9"/8.9" Planing Head Diameter : 5.9" Variable Speed: 1500-3000 RPM Back Clearance Angle Profile Cutter Heads (Min/Max) 10 Degree/30 Degree Planing Heads: 10-30 ...more
18" Delta Rockwell #18-AS, Radial Arm Saw, 7.5 HP, 3ph, 230/460 V.
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Delta Rockwell
Model: 18-AS
Delta Rockwell Model 18-AS Radial Arm Saw Maximum Blade Diameter 18" Motor 7.5HP; 3PH; 230/460 Volt Turret Arm Design Allows the Saw Blade to Pivot from the Middle of the Arm Serial No. FK-4606 This Machine is part of a total plant liquidation, Please call for.
Maggi #Big-800CE, Radial Arm Saw, 4 Hp, 2800 RPM, 230 V., 3ph, 16" blade, 1" arbor, 73.23" x 45.08" table, New
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Maggi
Model: BIG-800CE
4 HP, 2800 RPM motor 230 volt 3 phase 16 Blade diameter capacity (Not included) 1 Arbor diameter 73.23 x 45.08 Table size 27.75 Max crosscut length on 3/4 thick material (90 deg) 0 to 40.5 Rip capacity 4.9 Max depth of cut 19.68 Max cut length at 45 deg on right side 12.20 Max cut length at 45 deg on left side Dust ...more
Maggi #JUNIOR-640-CE, Radial Arm Saw, 4 HP, 2800 RPM, 15.75" blade, New
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Maggi
Model: JUNIOR-640-CE
Maggi Model Junior 640 Radial Arm Saw Maggi radial arm saws offer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage ...more
Original Saw #3559, Radial Arm Saw, 22.5" Super Duty, 7.5 HP, 3ph, TEFC, new
Category: Radial Arm Saws
Seller: RT Machine
Location: Hughesville, PA
Model: 3559
7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 50/60 HZ 8" depth of cut Automatic blade braking system through Variable Frequency Drive (VFD) Manual chain cross feed Manual hand crank for refined carriage control Adjustable crosscut stop Base column lock E-Stop Standard lower elevation on front of frame ...more
Reduced Voltage Motor Controls And Starters
1 Result
Curtis Wright Brenshaw, soft-start contr, 3 Phase, 60 Hz, 75 HP, 96 Amps, 480 V
Seller: RT Machine
Location: Hughesville, PA
Mfr: Wright
Curtis Wright Brenshaw Soft-Start Control Cabinet Max Motor HP - 75HP Wired for 480V 3Ph 60Hz Total Amp Draw - 96Amps.
Baker #A, Single Head, Resaw, 3ph, 20 HP TEFC, 6" conveyor, NEMA 12 panel, 240/480 V., New
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: A
Baker Model A Single Head Resaw, 3 PH 20 HP TEFC Motor 6" Wide Conveyor with Rough-top Belting Tilting Feed Belt to 8 degrees Note: Manual Adjustment, No Indicator 240/480 volt/3phase/60 Hz Hydraulic Feed System with 10 Gallon Reservoir Flow Control Valve for Variable Feed Speed Filter & Shut Off Valve Idler ...more
Baker #A, Single Head, Resaw, 3ph, 20 HP TEFC, 6" conveyor, NEMA 12 panel, 240/480 V.
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: A
Baker Model A Single Head Resaw, 3 PH 20 HP TEFC Motor 6" Wide Conveyor with Rough-top Belting Tilting Feed Belt to 8 degrees Note: Manual Adjustment, No Indicator 240/480 volt/3phase/60 Hz Hydraulic Feed System with 10 Gallon Reservoir Flow Control Valve for Variable Feed Speed Filter & Shut Off Valve Idler ...more
Baker #ABX, Single Head Resaw, 12" x 12", 30 HP, w/ return conveyor
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: ABX
Capacity 12" x 12" 30HP Motor Complete Hydraulic Feed System with a 10 Gallon Reservoir, Flow Control Valve for Variable Feed Speed,Filter,& Remote Feed Shut Off Pedestal Mounted Remote Start & Stop Station Tensioning for Band Blade Spring Tension Standard 12" - Wide Conveyor 28" Diameter Band Wheels ...more
Baker #ABX, Single Head Resaw, 12" x 12", 30 HP, TEFC, NEMA 12 panel, 95 FPM, New
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: ABX
Baker Model ABX Single Head Resaw Capacity 12" x 12" 28" Precision Machined Band Wheels 30HP Totally Enclosed Fan Cooled Motor Complete Hydraulic Feed System with a 10 Gallon Reservoir, Flow Control Valve for Variable Feed Speed,Filter,& Remote Feed Shut Off Powered Infeed Hold Down NEMA 12 Electrical Panel with ...more
Baker #ABXX, Single Head Resaw, 16" x 12", 40 HP, NEMA 12 panel, 95 FPM, pedestal, New
Category: Resaw Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Baker
Model: ABXX
Baker Model ABXX Single Head Resaw, 3PH Accepts Material 16" wide by 12" high 28" Precision Machined Band Wheels 40hp Totally Enclosed Fan Cooled Motor Complete Hydraulic Feed System with a 10 Gallon Reservoir Flow Control Valve for Variable Feed Speed, Filter, & Remote Feed Shut Off Powered Infeed Hold Down Nema ...more
RT Machine has 10 more
listings in Resaw Band Saws.
17" x 7-1/8" Northtech #NT-SF70, Stock Feeder, 7 Rollers w/ Universal Stand, 0.5 HP
Category: Roll Feeders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-SF70
NT-SF70 STOCK FEEDER 7 ROLLERS WITH UNIVERSAL STAND Northtech Stock Feeders are some of the strongest and longest lasting feeders available. Stock feeders, sometimes called power feeders, are typically used as an overhead drive system to power product across a surface or roll case. In many applications, it can also be ...more
Scissor Lifts
6 Results
2000 lb. Southworth #LS2-36, Scissor Lift, 3' lift height 115 V.
Category: Scissor Lifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Southworth
Model: LS2-36
Dimensions: 24" W x 48" L Rated Capacity: 2000 lbs. Low Height: 5.25" Vertical Travel: 36" Raised Height: 41.25" Primary Voltage: 115/1/60 Serial No. M716384F This Machine is part of a total plant liquidation, Please call for.
8000 lb. Southworth, Scissors Lift, Foot Pedal Control, Pit-Style Lift, 64" x 120" Top Size, 5 HP, 208-230/460 V
Category: Scissor Lifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Southworth
Southworth Scissors Lift Lifting Capacity: 8,000 lbs. Top Size: 64" x 120" Currently w/ L-Brackets Welded to Top for 4' Lumber Bunks Foot Pedal Control Hydraulic Power, 5 HP 208-230/460v, 3ph Motor Pit-Style Lift Seller will load onto a buyer's truck.
Nanxing #MF7112, 27" x 94" Scissors Lift, 27" x 94" Top w/Rollers, 480 V
Category: Scissor Lifts
Seller: RT Machine
Location: Hughesville, PA
Mfr: Nanxing
Model: MF7112
27" x 94" Top with Rollers Foot Pedal Controls, 480v, 3ph Note that there are multiple scissors lifts available, all of which are essentially un-used.
Autoquip Series 35, 4' x 7' Scissors Lift
Category: Scissor Lifts
Seller: RT Machine
Location: Hughesville, PA
RT Machine has 1 more
listing in Scissor Lifts.
Scrap Choppers
1 Result
Mellott #140, Scrap Shear
Category: Scrap Choppers
Seller: RT Machine
Location: Hughesville, PA
Model: 140
Lumber Capacity: 4" D x 11-1/2" W Ten Cuts Per Minute Standard Finished Piece Size: 11" - 14" Long Hydraulic Unit: 20 HP, 230/460v, 3ph Includes 11-1/2" x 20' Vibrating Conveyor Conveyor Motor: 3 HP Currently Wired for 460v (Ask about Changing Voltage) Serial No: 1400020.
40' Shipping Container, High-Cube, 91" width x 101" H
Category: Shipping Containers
Seller: RT Machine
Location: Hughesville, PA
40ft "High-Cube" Shipping Container Inside Dimensions: Length:40ft Width:91" Height: 101".
1" Dake #SB-250V, Floor Drill Press, 1.5 HP, 18" diameter, 68-1380 RPM, 5" travel, 3-5/8" diameter column, new
Category: Single Spindle Drill Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Dake
Model: SB-250V
Dake Model SB-250V Floor Drill Press Variable speed floor model drill press that automatically advances to preset depth, bottoms out, and returns automatically. Comes with forward and reverse selector switch for tapping applications, and a locking handle hub for repeatable depth. CE safety electrical package, a large ...more
Oliver #10060.001, Swing Bench Drill Press, 13-1/4" swing, 3/4" drill, 5/8" chuck, 280-3000 RPM, 2-7/8" diameter column, new
Category: Single Spindle Drill Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10060.001
Oliver Model 10060.001 14" Swing Bench Drill Press : Swing: 13-1/4" Drilling Capacity: 3/4" Chuck Capacity: 5/8" Chuck Taper: JT-3 Table Size: 11 1/2" Round Table Tilt : +/- 45 Degrees Spindle Taper: MT-2 Spindle Travel: 3-1/8" Spindle Speeds: 12 Speed Range RPM: 280 to 3,000 Spindle to Table: 17-3/4" Spindle to Base: ...more
Oliver #10060.001, Swing Bench Drill Press, 17" swing, 3/4" drill, 5/8" chuck, 240-3400 RPM, 3-1/8" diameter column, new
Category: Single Spindle Drill Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10060.001
Oliver Model 10062.001 17" Swing Floor Model Drill Press : Swing: 17" Drilling Capacity: 3/4" Chuck Capacity: 5/8" Chuck Taper: JT-3 Table Size: 12 x 12" Table Tilt : +/- 45 Spindle Taper: MT-2 Spindle Travel: 3-1/8" Spindle Speeds: 16 Speed Range RPM: 240 to 3,400 Spindle to Table: 28" Spindle to Base: 48 1/2" Column ...more
Laguna #DP:20, Drill Press, 20" swing, 6" travel, 60-3600 RPM, 3.15" diameter column, 1.5 HP, 115 V., new
Category: Single Spindle Drill Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: DP:20
Motor Voltage/hp: 115V/1.5HP Breaker: 15 amp. min. Power Cord: 72 (1830 mm) Table, cast iron: 15x22 (380 mm x 560 mm) Table Tilt: +/- 90 Degrees Table Swivel: 360 Degrees Laser Light: Included Working Light: LED, 5W Swing: 20 (510 mm) Spindle Taper: MT2 Spindle Travel: 6 (152.4 mm) Chuck: 5/56 5/8 (2-16 mm) Quill ...more
22" Oliver #10060.001, Swing Bench Drill Press, 22" swing, 1-1/4" drill, 3/4" chuck, 180-3420 RPM, 3-7/8" diameter column, new
Category: Single Spindle Drill Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10060.001
Oliver Model 10063.001 22" Swing Floor Model Drill Press : Swing: 22" Drilling Capacity: 1 1/4" Chuck Capacity: 3/4" Chuck Taper: JT-3 Table Size: 16 x 18 1/2" Table Tilt : +/- 45 Spindle Taper: MT-3 Spindle Travel: 4 1/2" Spindle Speeds: 12 Speed Range RPM: 180 to 3,420 Spindle to Table: 26 3/4" Spindle to Base: 48" ...more
Spreader Feeders for Laundry
1 Result
Gerber #XLS50, fabric spreader, 6' x23' work area, 2022
Category: Spreader Feeders for Laundry
Seller: RT Machine
Location: Hughesville, PA
Mfr: Gerber
Model: XLS50
Year: 2022
2022 Gerber Lectra XLS50 Fabric Spreader GERBERspreader XLs offers a tension-free, automated material spreading solution that ensures material rolls are spread without tension and the edges are aligned perfectly. The XLs is ideal for a wide range of material applications. Optimize material utilization. The ...more
Straight Line Rip Saws
16 Results
Diehl #750, Straight Line Rip Saw, 25" throat, 2" arbor, 14-18" blade, 20 HP, 80" x 63" table
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: 750
Main Motor: 20 HP, 220/440v, 3ph Feed Motor: 440v, 3ph Multi-Speed Motor, 3, 2, & 1.5 HP Table Size: 80" x 63" Rip Fence Anti-Kickback Fingers Throat Capacity: 25" Arbor Diameter: 2" Saw Blade Diameter: 14" - 18" Stock Thickness: 1/8" - 4-1/4" (w/ 18" Blade) Minimum Length of Stock: 6" Serial #: 51 1903.
Diehl #SL-30, Fixed Arbor Straight Line Rip Saw, 15HP spindle, 2 HP feed, 60 FPM feed, New
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL-30
Diehl Model SL-30 Fixed Arbor Straight Line Rip Saw The Model SL30 sets the industry standard for accuracy, durability, and lowest cost of ownership. Bolt this machine to the floor and forget about it - It is THAT reliable. 208, 240 or 480 volt, 3 phase, 60 cycle 15 HP belt driven saw spindle 2 HP feed motor Automatic ...more
Diehl #SL-35, Straight Line Rip Saw, 15 HP arbor, 2 HP feed, 50-140 FPM, 2" arbor bore, 19" throat, 3450 RPM arbor, New
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL-35
Diehl Model SL-35 Straight Line Rip Saw Diehl's Mid-Sized Rip Saw, an economically priced machine with the speed and performance of large saws, with guaranteed glue line accuracy. All this coupled with Diehl's legendary quality and durability. Arbor Motor: 15Hp (11.2 Kw), 20Hp (15 Kw) optional Feed Motor: 2Hp ...more
Diehl #SL-52, Straight Line Rip Saw, 15 HP, 64" x 78" tbl, AB switches, parts, stackable racks
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL-52
15HP Electric Motor 64" x 78" Table Allen Bradley disconnect switches Includes (3) 48" width x 9" height x 35.5" depth stackable racks (1) Wood crate full of assorted parts.
Diehl #SL65-19, Straight Line Rip Saw, 20 HP, 3450 RPM arbor, 3 HP, 75-200 FPM feed, 19" throat, New
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL65-19
Diehl Model SL65-19 Straight Line Rip Saw Diehl's Full-Sized Rip Saw, a machine with the speed and performance to meet the most demanding applications and with guaranteed glue line accuracy. All this coupled with Diehl's legendary quality and durability. Arbor Motor: 20HP Belt Drive Standard (Optional 25HP ...more
RT Machine has 11 more
listings in Straight Line Rip Saws.
Casolin #Astra-DGT, Sliding Table Saw, 10"-16" Blade, 128" Table, 1.18" Bore, 8 HP, 5000 RPM
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Casolin
Model: ASTRA-DGT
Casolin Model Astra DGT Sliding Table Saw Sliding Table 128" (3200mm) Saw Motor - 8Hp (6kW) Saw Blade Size (Min/Max) 10"-16" (250/400mm) Saw Blade Bore - 30mm Saw Blade Speed (Variable) 3200,4200,5000 RPM Scoring Motor - 3/4HP (0.6kW) Serial No. 1662006 Scoring Blade Bore - 20mm Scoring Blade Speed - 9000RPM ...more
Fimal #P3200-08AX, Sliding Table Saw, 13.8" blade, 1.2" bore, 4200 RPM, 7-3/8 HP, New
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fimal
Model: P3200-08AX
Fimal Model P3200AX Sliding Table Saw Fixed Table Dimensions/Height:40-1/2" x 25-5/8" / 34-1/4" (1030x650mm / 870mm) Lockable Carriage Carriage Dimensions/ Stroke: 126" x 15-3/4" / 137-13/16" (3200x400mm / 3500mm) Cutting Width: 51-3/16" (1300mm) Max Diameter Saw Blade: 350mm Saw Blade Bore Size: 30mm Saw Blade Speed: ...more
Fimal #P350NX, Sliding Table Saw, 13.8" blade, 1.2" bore, 3000/4600 RPM, 5-3/8 HP, New
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fimal
Model: P350NX
Fimal Model P350NX Sliding Table Saw Fixed Table Dimensions/Height: 39-3/8" x 22" / 33-7/8" (1000x560mm / 860mm) Lockable Carriage Carriage Dimensions/ Stroke: 126" x 13-3/4" / 131-7/8" (3200x350mm / 3350mm) Cutting Width: 51-3/16" (1300mm) Max Diameter Saw Blade: 350mm Saw Blade Bore Size: 30mm Saw Blade Speed: ...more
Fimal #P450AX, Sliding Table Saw, 13.8" blade, 1.2" bore, 3000/3600/4200 RPM, 7-3/8 HP, New
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fimal
Model: P450AX
Fimal Model P450AX Sliding Table Saw Fixed Table Dimensions/Height: 39-3/8" x 22" / 33-7/8" (1000x560mm / 860mm) Lockable Carriage Carriage Dimensions/ Stroke: 126" x 13-3/4" / 131-7/8" (3200x350mm / 3350mm) Cutting Width: 51-3/16" (1300mm) Max Diameter Saw Blade: 350mm Saw Blade Bore Size: 30mm Saw Blade Speed: ...more
Laguna #FUSION-F1, Table saw, 1.5 HP, 3450 RPM, 30" rip capacity, 10" blade, 4000 RPM arbor, 5/8", New
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: FUSION-F1
Laguna Model Fusion F1 Tablesaw FINALLY! An affordable fusion tablesaw. We have packed all the s that our users have come to love in an affordable, sleek, and very precise package. The new Laguna Fusion line was developed for demanding woodworkers. Designed around quality components with an emphasis on superior dust ...more
RT Machine has 12 more
listings in Table Saws.
Balestrini #Pico, Round End Tenoner, 600/700 tenons/hr., 3.9" width x 1.2" thick x 2" D max Tenon Size, 20 deg. Table Tilt, 4 HP, 9000 RPM
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Mfr: Balestrini
Model: PICO
Balestrini Model PICO Round End Tenoner Hourly Production: 600/700 Tenons Tenon Width: Max. 100 mm + Thickness Tenon Thickness: Max. 30 mm Tenon Depth: Max. 50 mm Table Tilt: Max. 20 Degrees Workpiece Fence Swiveling 45 Degrees Cutter Rotation 9000 RPM Cutter Motor 4 HP Cycle Motor 1 HP Serial No. E483 R23.
Friulmac #Floormat/EQ, Double End Tenoner, 9.75" width x 59" L x 1.37" thick max Work capacity, 150 mm Saw Blade diameter, 8.5" Tooling diameter, (4) 4 HP
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: FLOORMAT/EQ
Friulmac Model Floormat/EQ Double End Tenoner with Top and Bottom Scoring/Cut-off Units (Tilting) and one Fixed Profiling Unit each SideFour 4 HP (3 KW)Trim/Cut-off Motors 2 (2 each side) 30mm Bore on Trim Units150mm Saw Blade Dia. Two 7 1/2 HP (5.5 KW) Fixed Profiling Units (1 each side)Profiling Units have 40mm Bore ...more
Friulmac #Quadramat, Double End Tenoner, 59" Width capacity, 3.9" max Thickness, 41" Loading Space, 40 mm diameter Spindle, (4) 15 HP
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: QUADRAMAT
Friulmac Model Quadramat Double End Tenoner Width Capacity: 1,500 mm (59") Maximum Loading space 1,041 mm (41") Thickness 10 - 100 mm (0.4" to 3.9") Four Stations Each Side: Jump cope - Cope - Jump Cope - Cope Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. Variable ...more
Friulmac #Quadramat, Single-End Tenoner, 59" width x 59" L x 1.6" max Work capacity, 13-98 FPM, 7.4/4.7 HP, 460 V, 2005
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: QUADRAMAT
Year: 2005
Friulmac Model Quadrant Single-End TenonerAvailable tested through our service shop, or as-is depending on your budget! Friulmac Model Quadramat Single-End Tenoner Workpiece Length: 125 - 1500mm Workpiece Width: 125-1500mm Workpiece Thickness: 13 - 40mm Configuration: Jump-Cope, Cope, Wheel-Sanding, Wheel-Sanding ...more
Friulmac #Quadramat, Double-End Tenoner, 19.6" width x 57" L x 1.96" max Material Size, 150 mm Scoring Blade diameter, 460 V, 2011
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: QUADRAMAT
Year: 2011
Late-Model, Compact Double-End Tenoner! Friulmac Model Quadramat Double-End Tenoner Material Length: 206mm - 1,450mm (8.09" - 57" Material Width: 15.9mm - 500mm (0.63" - 19.6" Material Thickness: 15.9mm - 50mm (0.63" - 1.96") Feed chain 1-1/2" wide with rubberized pads Station #1: Left & Right Scoring Scoring ...more
RT Machine has 4 more
listings in Tenoners.
Yamaha, Electric Golf Cart, w/Charger
Category: Utility Vehicles
Seller: RT Machine
Location: Hughesville, PA
Mfr: Yamaha
Electric, Charger Included Note that there are two carts available, both would include a charger.
Vacuum Membrane Presses
1 Result
Wemhoner #KT-MB-28/15-240, membrane press, VarioPress Basic+, Siemens Simatic Control, Variopin
Category: Vacuum Membrane Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Wemhoner
Model: KT-MB-28/15-240
MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x ...more
Vertical Band Saws
17 Results
9" x 14-1/2" Work-A-Matic #Bandsaw, 3/4 HP, 115 V.
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Model: BANDSAW
Work-A-Matic Vertical Bandsaw Gravity Feed, The Blade Feeds into the Material by Gravity Capacity 9" x 14-1/2" Motor 3/4HP; 1PH; 115 Volt NOTE THAT THERE IS AN ELECTRICAL ISSUE WITH THIS Sander AND IT DOES NOT CURRENTLY RUN This is a part of a total plant liquidation, Please call for.
16-1/2" Laguna #LT18, Bandsaw, 5 HP, 18-3/8" resaw, 220 V., 1/16" -1-3/8" x 158" blade, 19" x 25" table, New
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: LT18
The Laguna Tools LT 18 bandsaw is the perfect step-up from the legendary LT16 HD. The larger table and increased resaw height and throat capacity open additional opportunities to show off your woodworking skills. This European saw s a 5 HP Leeson motor to provide plenty of power to match the 18.5 resaw height. The ...more
20" Northfield, Band Saw, 25" x 25" table, 1-3/8" x 20" wheel, new
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Northfield Heavy Duty 20" Band Saw : Wheel Face : 1-3/8" Table Size: 25 x 25" Front Edge of Table to Teeth of 3/8" Blade: 9-1/2" Capacity Under Guide: 14" Table Tilts to Right : 45 degrees Table Tilts to Left : 10 degrees Horizontal Capacity: 19-1/2" Table Height: 39-1/2" Wheels: Aluminum Disc Brake: Lower Wheel Foot ...more
36" Northfield, Vert Band Saw, 30" x 36" table, 36" diameter x 2" wheel, new
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Northfield Heavy Duty 36" Band Saw : Wheel Face : 2" Table Size: 30 x 36" Front Edge of Table to Teeth of 3/8" Blade: 12" Capacity Under Guide: 22" Table Tilts to Right : 45 degrees Table Tilts to Left : 5 degrees Horizontal Capacity: 35 1/2" Table Height: 42" Brake: Lower Wheel Foot Operated Wheel Circumference : 36" ...more
36" x 18-1/2" Tannewitz #GH, Vert Bandsaw, 5 HP, 36" wheel, 19' 9" blade, 835 RPM
Category: Vertical Band Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Tannewitz
Model: GH
Tannewitz Model GH 36" Bandsaw 36" Wheel Diameter Main Motor: 5 HP, 220/440v, 3ph, 835 RPM Main Table: 35" x 37" Aux. Table: 19" x 16" Throat Capacity: 36" Top & Bottom Blade Guides & Bearings Manual Tension Adjustment Table Tilts Blade Width: 1/8" - 2" Capacity Under the Guide: 18-1/2" Maximum Blade Length: ...more
RT Machine has 12 more
listings in Vertical Band Saws.
Vertical Boring Mills & VTL's
2 Results
Sicotte #J-3H-6, Multi-Spindle Vertical Borer, 24" x 72" table, rebuilt
Category: Vertical Boring Mills & VTL's
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sicotte
Model: J-3H-6
Sicotte Model J-3H-6 Multi-Spindle Vertical Borer This machine would be supplied with four rebuilt spindles, or purchase it as-is and finish the work yourself! Four 2 HP, 230/460v, 3ph Spindle Motors Each Motor Drives a Single Spindle (for a Total of Four) Table Size: 24" x 72" Two Spring-Loaded Hold-Downs Table ...more
Sicotte #J-3H-7, Vertical Boring Machine, 8" stroke, 84" x 24" table,
Category: Vertical Boring Mills & VTL's
Seller: RT Machine
Location: Hughesville, PA
Mfr: Sicotte
Model: J-3H-7
Sicotte Model J-3-H-7 Vertical Boring Machine Available in as-is condition, or you can contract RT Service to fit it for your particular application. We can repair and add spindles/hold-downs as needed! Table Size and Boring Area: 84" x 24" Five (5) - 1.5HP, 230/460v, 3ph Spindle Motors Currently with Four Spindles ...more
Vertical CNC Machining Centers
1 Result
Homag #BMG311-Venture316L, 5-Axis CNC Machining Center, 13.4 HP, liquid cooled spindle, 14 automatic tool changer, Chip Conv., PowerTouch, 2015
Category: Vertical CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: BMG311-VENTURE316L
Year: 2015
Homag BMG 311 Venture 316L 5-Axis CNC Machining Center 13.4 HP Liquid-Cooled 5-Axis Router Spindle Router Spindle Accepts HSK-63F Tool Holders 14-Position Rotary Carousel Style Automatic Tool-Changer 16-Spindle Boring Unit (7 x 6 Verticle Drills and 2 x 2 Horizontal Drills) Eight Moveable Fixture Rails, 1330mm Each in ...more
Window and Door Manufacturing Machinery (For Aluminum, Vinyl And Wood)
5 Results
Omec #F13S, Automatic Milling Machine, 4.55 HP, 2 blade, 5600 RPM, 1200/hr, PLC, new
Seller: RT Machine
Location: Hughesville, PA
Model: F13S
Omec Model F13S Automatic Milling Machine Technical Data: Power installed of machine: 4.55 HP Working pressure: 0.7 Mpascal Number of blades: 2 Blade revolutions: 5,600 RPM Position of grooves: Variable Piece production: 1200 n/h Workpiece Limits Lengths: Min. 40mm Max. 600mm Width: Min. 40 mm Max. 850mm Thickness: ...more
AMP #Mitre-Mite-VN4, framing V-nailer, 120 V., 3.15" x 3.94" max frame
Seller: RT Machine
Location: Hughesville, PA
Model: MITRE-MITE-VN4
AMP Model VN4 Frame Assembly Machine Frame Thickenss.197” - 3.15” Frame Width.39” - 3.94” Maximum Distance Between V-Nails 4.72” V-Nail Magazine Capacity 220 V-Nail Sixe 7, 10, 15mm Power Supply 120 Volt Maximum Programming Capacity 1400 Programs Serial No. S9965.
Northtech #NT-DBC102540, Drawer Box Clamp, 25" x 10" x 40", 2 stage
Seller: RT Machine
Location: Hughesville, PA
Model: NT-DBC102540
Northtech Model NT-DBC102540 Drawer Box Clamp Universal drawer box clamp with fixed left side clamp Manually adjustable right side clamp Working Capacity (LxWxH): 10" x 25" x 40" Two stage clamping for smooth operation Two hand push button operation for added operator safety Rapid set opening means no tools needed for ...more
Northtech #NT-DBN26, Drawer Box Notcher, 5 HP, 3ph, 200 BPH, 10" diameter cutter, new
Seller: RT Machine
Location: Hughesville, PA
Model: NT-DBN26
Northtech model NT-DBN26 Drawer Box Notcher Motor 5HP 3PH 230V or 460V 60HZ Max notch dimension of 57mm (2-1/4"x 0.5" H with included head Capable of notching over 200 boxes/hr Designed to notch the underside of a drawer as well as drill the back for using under mount drawer slides Cutter diameter: 10" Drill diameter: ...more
Celaschi #TSA-480/360, Double Side Complete Door Squaring Line, rollers, tenoners
Seller: RT Machine
Location: Hughesville, PA
Model: TSA-480/360
4-SIDED SIZING-SHAPING LINE (currently for Internal Doors)., Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) ...more
Wood Finishing Equipment
8 Results
Barberan #PUR-46-L, Profile Wrapping Machine, 6 m Machine length, 23.6" min. Work length, 0.4"-17.7" width Passage, 7.9" diameter Transport Roll, 1.5 kW, 2016
Category: Wood Finishing Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Barberan
Model: PUR-46-L
Year: 2016
Barberan Model PUR-46-L Profile Wrapping Machine Machine Length: 6m Materical Capacity: Min Work Piece Length: 600mm Passage Width: 10mm-450mm Min/Max Profile Height:4mm-120mm Feed System: 24 Driven Transport Rolls Transport Roll Dimensions: 200mm (Dia.) Transport Roll Spacing: 250mm Feed Speed: 10-60m/min Feed Motor: ...more
Barberan #PUR-46-L, Profile Wrapping Machine, 6 m Machine length, 23.6" min. Work length, 7.9"-23.6" width Passage, 7.9" diameter Transport Roll, 1.5 kW, 2016
Category: Wood Finishing Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Barberan
Model: PUR-66-L
Year: 2016
Barberan Model PUR-66-L Profile Wrapping Machine Machine Length: 6m Material Capacity: Min Work Piece Length: 600mm Passage Width: 200mm - 600mm Application Width: 720mm Feed System: 24 Driven Transport Rolls Transport Roll Dimensions: 200mm (Dia.) Transport Roll Spacing: 250mm Feed Speed: 8-40m/min Feed Motor: 1.5 kW ...more
Cameron Automation #513B-12S-10.5L-9W-440V-L-20I-BF-M4, Flooring Nester, 55 FPM, LR, 2022
Category: Wood Finishing Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cameron
Model: 513B-12S-10.5L-9W-440V-L-20I-BF-M4
Year: 2022
Cameron Automation Model 513B-12S-10.5L-9W-440V-L-20I-BF-M4 Flooring Nester Flooring Lengths: 8" to 10.5' Flooring Widths: 1-1/2" to 9" Flooring Thickness: 3/8" to 3/4" Bundle Lengths: 10.5' Bundle Width:Up to 16" Bundle Height: Up to 7.5” Production: 55 Lineal ft./min, 36 Seven Foot Bundles/Hour 5,000+ ...more
Cefla #Prima, Reciprocating Spray Machine, w/ Unidry-G Hot Air Drying Conveyor, 2022
Category: Wood Finishing Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cefla
Model: PRIMA
Year: 2022
Cefla Prima Reciprocating Spray Machine w/ Unidry-G Hot Air Drying Conveyor Vacuum Belt Conveyoing System w/ Continuous Disposable Paper Belt Overspray Exhaust through Double Down-Draft Filters Workpiece Length: 305 - 3,000mm Workpiece Width: 19 - 1,300mm Workpiece Thickness: 6 - 50mm Conveyor Speed: 3 - 10 FPM 12.1" ...more
Cefla, Package of Flat-Line Finishing Machinery, w/EliSpray Rotary Spray Machines, Curing Ovens, Panel Cleaners, Material Handling, 2006
Category: Wood Finishing Equipment
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cefla
Year: 2006
This is a rare package of 2006 Cefla and Sorbini equipment that has seen only approximately one year of use. The machinery was pulled from its production setting several years ago, and has been in storage ever since. Package Includes: Two Cefla EliSpray 16-Head Automatic Rotary Spray Machines Cefla FV4/3500/133/116 ...more
RT Machine has 3 more
listings in Wood Finishing Equipment.
Wood Grinders and Hogs
1 Result
Vecoplan #VAZ-1300-M, Vertical Wood Grinder, 15" diameter x 51" L rotor, 142 RPM, 60 HP, 460 V., 2016
Category: Wood Grinders and Hogs
Seller: RT Machine
Location: Hughesville, PA
Mfr: Vecoplan
Model: VAZ-1300-M
Year: 2016
Vecoplan VAZ 1300 M Vertical Rotary Shredder Hopper Opening: 52" x 58" Hopper Volume (cu. yards): 3.75 Rotor Diameter: 15" Rotor Length: 51" No. Cutters: 60 (40mm x 40mm) Rotor Speed: 142 RPM Drive Motor: 60 Hp Feed System: 3 HP, dual speed Voltage: 460 volts, 3 phase, 60 Hz 2016 Model Year Screen Size: 3/4".
Fisher & Ruckle Fisher+Ruckle #FZR-15, Crossfeed Splicing Machine, 59" L x 19.6" width x 0.059" thick max Veneer Strip Size, 60" L Heating Zone, 2023
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fisher&ruckle
Model: FZR-15
Year: 2023
Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Production Speed is 17-20 Cycles/min (Based on Average Veneer Strip Width of 100mm, Cross Grain) Veneer Strip ...more
Fisher & Ruckle Fisher+Ruckle #Impetum-1200, Longitudinal Veneer Splicer, 47.2" width x 149.6" L x 0.1" thick max Veneer Strip Size, 46.8" Heating Area, 400 V, 2021
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fisher&ruckle
Model: IMPETUM-1200
Year: 2021
Fisher & Ruckle Model Impetum 1200 Longitudinal Veneer Splicer Feed speed: 5- 40 m/min Production Speed w/0.6mm Veneer: 20-30 m/min Heating Area: 1190 mm @ 200C Veneer : Veneer Strip Width: 35-1200mm Veneer Strip Length: 380-3800mm 3mm Thickness Capacity Foot Pedal Remote Integrated Glue Pot Chilling Unit Memory ...more
Northtech #Cutmate-4000D, Single Knife Veneer Guillotine, 157" L cut, 4,7" open, Mitsubishi PLC, new
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: CUTMATE-4000D
Cutting Length : 4000 mm (157") Maximum Opening : 120 mm (4.7") Cutting width: 25 ~ 650mm (.98" - 25.6") Pack Beam Width: 150mm (5.9") Electric Power: Approx. 7.5kw 60 mm knife cylinder Green cutting indicator European safety standards Yuken hydraulic system Mitsubishi PLC control system Rigid welded machine body for ...more
Northtech #Innovator-Cutmate-4000D, Double Knife Veneer Guillotine, 157" L cut, 3.14" open, Mitsubishi PLC, new
Category: Wood Veneer Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: INNOVATOR-CUTMATE-4000D
Cutting Length : 4000 mm (157") Maximum Opening : 80 mm (3.14") Cutting width: 30~470mm (1.18" - 18.50") Dimensions of Guillotine: (L) 225" x (W) 71" x (H) 83" Dimensions of Hydraulic Tank: (L) 46" x (W) 22" x (H) 43" s Parallel cutting guaranteed JAPAN YUKEN hydraulic system With European safety standards Able to use ...more
Woodworking - General Machines
4 Results
Hess-Mae, Pneumatic Clamp Table, on Wheels
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hess-Mae
Hess Model Mobil 3000 Edgebanding Press Material Capacity: 118" Working Length (3000mm) 6 Clamp and Press Cylinders Working Dimensions: 1-1/4" Edging Thickness X 2-3/8" Edging Height Machine Dimensions: L126" x W27" (L3200mm x W670mm) Preheating Bar (for Solid Wood Edges) Vertical & Horizontal Configuration Group ...more
Mereen-Johnson #110-C, Equalizer, feeds One Piece per Lug, 36" max Width capacity, 7.5 HP, 3600 RPM, 460 V
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 110-C
Mereen-Johnson 110-C Equalizer Equalizer Vertical Hopper feeds One Piece per Lug, Trim Motors on LH and RH sides. Single Piece or unsurfaced Glued-up Panels Two 7-1/2 HP 3600 RPM TEFC Standard Frame Arbor Motors Tilting From 0 to 45 Degrees Arbor Motors arranged for 3 phase, 60 Hertz, 460V, 24v DC Controls Voltage. ...more
Omec #ICA-600, Automatic Glue Machine, new
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: ICA-600
Omec Model ICA 600 Automatic Glue Machine Technical Data: On board machine installed power: 0.5kw Working pressure: Mpascal 0.7 Glue Type: vinyl glue Glue Tank Capacity: 32 Workpiece Limits Draw Length: min. 150mm max. 600mm Draw Width: min. 60mm max. 4050mm Draw Thickness: min. 4mm max. 25mm Standard Equipment ...more
Omec #ICM-300, Automatic Gluing for Drawers, 9l / 2.3gal glue tank capacity, new
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: ICM-300
Omec Model ICM 300 Automatic Gluing for Drawers Technical Data On board machine installed power: 30 watts/.25HP Working pressure: Mpascal 0.7 Glue Type: Low Viscosity Assembly Glue Glue Tank Capacity: 9 liters/2.3 gallons Workpiece Limits Draw Length: min. 150mm max. 1500mm Draw Width: min. 50mm max. 450mm Draw ...more
Woodworking Boring Machines
13 Results
6 Spindle, Northtech #NT-HBSS280, Horizontal Boring Machine, 2 HP, 1/2" chuck, 4200 RPM, 5-1/2" stroke, new
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-HBSS280
Northtech Model NT-HBSS280 Horizontal Boring Machine The NT-HBSS280 is a heavy duty horizontal boring machine. The multiple boring head configuration is adjustable for varying hole layout for customer flexibility. Rugged cast iron base for a solid footing and decades of performance. Pneumatic hold downs and drill ...more
21 Spindle, Vitap #T21, Horizontal/Vertical Boring Machine, Semi-Automatic, 32 mm Centers, 70 mm Depth of Hole, 34" x 20" Table, 2.5 HP, 2800 RPM
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Vitap
Model: T21
Vitap Model T-21 Semi-Automatic Boring Machine 21 Spindles on 32mm Centers Total Center Distance Between First and Last Spindle 640mm (25") Manual Tilting from Horizontal to Vertical or Angled Maximum Depth of Hole 70mm (2.75") Spindle Motor 2.5HP Spindle Rotation 2800 RPM Table Size 34" X 20" Serial No. 910216.
Weeke #BST-500, Automatic Boring Machine, TOPDRILL-BST-500 Control, 21 spindle
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Model: BST-500
Numerical Control Type: Power Control Software: TOPDRILL BST 500 Two through-feed motorized conveyor belts Two horizontal drilling units/supports (with Digital quota/axes display) One drilling head for each horizontal unit (1 x Kw 1.5) 21 spindles for each horizontal drilling head Max. Working Width: 2500mm Min. ...more
31 Spindle, Northtech #NT-VBSV-204, Boring Machine, 12 HP, custom spindle arrangement, 4250 RPM, 3 head, 7 CPM, new
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-VBSV-204
Northtech Model NT-VBSV-204 Boring Machine Machine HP: 12HP Custom Spindle Arrangement Spindle Diameter: M8x1.25 MM Quick Chuck Spindle RPM: 4250 RPM Elevation System: Hydraulic w/ Adjustment Wheel Pedestal Control Panel Max Working Thickness: 5-9/16" Number of Heads: 31 Spindles, 3 Heads Vertical Travel: 3-7/8" on ...more
46 Spindle, Ritter #R46, Double-Row System Drill, 3 HP, TEFC, 4-24" cc, digital read out, 30" x 48" table, 3ph, 240/480 V., new
Category: Woodworking Boring Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ritter
Model: R46
Ritter Model R46 46-Spindle Double-Row System Drill (2) 3 HP Spindle Drive Motors, TEFC (2) 23-Vertical Gear Driven Spindle Rows 32mm Spindle Centers 10mm Bored Collets (24) Right Hand, (22) Left Hand 4"-24" Centers Between Rows Digital Readout Front Head Position Display Precision Linear Head Ways (3) Quick Set Drill ...more
RT Machine has 8 more
listings in Woodworking Boring Machines.
Woodworking CNC Machining Centers
9 Results
Circle T Manufacturing #LM-116, Single-Spindle Miter Machine, Tilting Lock, 5 HP, 1-1/4" diameter spindle, 7600 RPM, 20-60 FPM, 670 cfm, 230/460 V., new
Category: Woodworking CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Circle
Model: LM-116
Circle T Manufacturing LM 116 Single-Spindle Tilting Lock Miter Machine The Model LM 116 is Specially Designed to Produce a Lock Miter Joint, Commonly Seen in High-End Cabinetry, Posts, Etc. Male and Female Profiles are Both Cut Via a Single, Tilting Spindle Newly Designed Eleven Roll Power Feed! Spindle Motor: 5 HP ...more
Friulmac #AXYMAT-F-3X-2500, Woodworking CNC Machine, new
Category: Woodworking CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: AXYMAT-F-3X-2500
Friulmac Model AXYMAT-F 3X - 2500 CNC Machine for Furniture Component Production CNC machining head designed for high standards of quality and reliability with a range of use up to 2300mm, high acceleration and positioning speeds up to: 75 meters / min. Nr. 3 + 3 heavy work holding benches adjustable on linear guides ...more
Hipoint #NZK8E, CNC Machining Center, 39.4" width x 1.6" thick max Panel Size, 11" min. Panel length, 2 HP, 6000 RPM
Category: Woodworking CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Hipoint
Model: NZK8E
HiPoint Model NZK8E CNC Machining Center Min Panel Length: 280mm Min/Max Panel Width: 120mm/1000mm Min/Max Panel Thickness: 10-40mm Vertical Spindle Stroke: 60mm Vertical Spindle RPM: 6000 RPM Vertical Spindle Tooling: 10mm Horizontal Spindle Stroke: 60mm Horizontal Spindle RPM: 4740 RPM Horizontal Spindle Tooling: ...more
Homag #CNC-PTP-160, CNC Machining Center, 38 mm Drill depth, 128" L x 49.2" width Table, 9 kW, 1250-21000 RPM, 400 V, 8-Slot Tool Changer
Category: Woodworking CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: CNC PTP 160
Homag Model CNC PTP 160 CNC Machining Center Spindle: R1-HSK63-9kW - 1250-21000 RPM w/ 8 Slot Tool Changer V21 High Speed - Vertical Drill Aggregate with 21 Spindles: - Drill Depth - 38mm - Drill Bit Shaft Dia. - 10mm - Drill Spacing - 32mm H6X/2Y - Horizontal Drill Block with 8 Spindles: - 6 Spindles - X-axis - 2 ...more
Ritter #R19F3, Vertical Drilling Machine, 32mm, 3 HP, TEFC, 12" throat, 60" fence, new
Category: Woodworking CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ritter
Model: R19F3
Ritter Model R19F Vertical 32mm Drilling Machine 23-Spindle Drill Head Gear Driven Spindles on 32mm Centers Index Pins 3 HP Spindle Drive Motor, TEFC 10mm Bored Collets (12) Right Hand, (11) Left Hand 12" Throat Depth 60" Back Fence With (4) Stops 24" X 48" Work Table Surface (2) Spring Operated Hold Downs Wired ...more
RT Machine has 4 more
listings in Woodworking CNC Machining Centers.
Woodworking CNC Routers
20 Results
Giben #G2-Genesis-48, CNC Router, 103.7" X, 63" Y, 7.9" Z, 98.4" x 51.2" Table, 12 HP, 24000 RPM, 208-240-480 V
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Giben
Model: G2 GENESIS 48
Feed Rate: X Axis ~ 60 m/min Y Axis ~ 60 m/min Z Axis ~ 20 m/min One 12 Hp ANDI HSK-63F air cooled spindle, 24,000 RPM 5 x 5 vertical drilling SYNTEC CNC Controller with independent cabinet and remote hand wheel One 10 Hp Becker vacuum pump Touch off function fixed on the table Helical rack direct drive ~ not belt ...more
Homag #Optimat-BAZ-322/40, CNC Router, 12-Spindle Boring Head, 12 Tool capacity, 19.4 HP
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Homag
Model: OPTIMAT BAZ 322/40
Homag Model Optimat BAZ 322/40 CNC Router The BAZ is a machining center for routing, drilling, contour edgebanding and edge finishing. It is an electronic control for batch size production of curvilinear components for the flat panel industry.€€ The machine s two (2) independent Y-axes for main spindle and ...more
Maggi #Evolution-1000-EVO, CNC Machining Center, 11 vert/6 horizontal drills, new
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Maggi
Model: EVOLUTION-1000-EVO
Maggi Model Evolution 1000R CNC Machining Center Workpiece Dimensions: Min/Max (mm) X 300/10,000 mm Y 75/1000 mm (With grooving saw min. 120 mm) Z 8/60 mm Drilling Configuration: 11 Vertical Drills 6 Horizontal Drills (All on 32 mm Centers) 1 Saw Blade Router: (1) 3.6 kW Electrospindle, 18,000 RPM Grooving Saw X-Axis ...more
Morbidelli #Author-M400-FM, CNC Router, 143" x 62.9", 16-1/2 HP, 18000 RPM, 16 tools
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Morbidelli
Model: AUTHOR-M400-FM
Morbidelli Model Author M400 FM CNC Router, Number of controlled axis: 3, Axis Speed:, X Axis: 90 m/min (295FPM), Y Axis: 90 m/min (295FPM), Z Axis: 50 m/min (98FPM), Main Electrospindle power: 16-1/2HP, Spindle r.p.m. 18000 RPM, Drill Block: F22L - 4HP Motor, X axis working area: 143 inch, Y axis working area: 62.9 ...more
Onsrud #121M, CNC Router, 145" X, 78" Y, 9" Z, 121" x 61" table, 12 HP, 24000 RPM, 10 tool, new
Category: Woodworking CNC Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: 121M
C.R. Onsrud Model 121M CNC Router The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don't be fooled into thinking it's any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same ed engineering, workmanship and quality of materials ...more
RT Machine has 15 more
listings in Woodworking CNC Routers.
Nichols, Corner Block Machine, 3-head, 10-12 BPM, 12" diameter blade
Category: Woodworking Drills
Seller: RT Machine
Location: Hughesville, PA
Mfr: Nichols
Trim saw unit to cut mitered edges 12" Diameter Blade Trim Saw Motor 3HP Maximum 2-1/2'' square stock Miter adjusts 38-52 degrees Three (3) horizontal angle boring motors One (1) vertical boring motor Drill Unit Motors 1HP Estimated production of 10 to 12 blocks per minute from literature. Call for verification.
Woodworking Edgebanders
16 Results
Biesse #Stream-SB11.0, Soft Edge Bander, 60mm thick panel, Sinitra Control, 131 FPM, sound attenuated enclosure
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Biesse
Model: STREAM-SB11.0
DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and ...more
Biesse #Stream-SB2-9.5, Double-Side Sizing & Edgebanding Machine, 60mm thick panel, Sinitra Control, 131 FPM, sound attenuated enclosure
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Biesse
Model: STREAM-SB2-9.5
Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and ...more
Brandt #Ambition-1440-Optimat-KDF-440-AT, Edgebander w/AirTec, 0.4-8 mm Edge Band thickness, 8-60 mm Panel thickness, 160 mm L x 70 mm width min. Panel Size, 2014
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Brandt
Model: AMBITION 1440 OPTIMAT KDF 440 AT
Year: 2014
Brandt Model Optimat 1440 KDF 440 AT Edgebander Includes "AirTec" Hot-Air Edgebanding Capabilities Edge Band Thickness: 0.4 - 8mm Panel Thickness: 8 - 60mm Min. Panel Length: 160mm Min. Panel Width: 70mm Two-Motor Pre-Milling Unit (Counter-Rotating) Three-Roll Pressure Section w/ Pneumatic Guillotine Two-Motor ...more
Doucet #BT-48-60-T6-48-240-D, Edgebander Return Conveyor, 8 belt, 0.5 HP, right hand
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Doucet
Model: BT-48-60-T6-48-240-D
Doucet Model BT-48 Edgebander Return Conveyor, 8 Transfer Belts: Spaced @ 3-3/4", 6-3/4", 9-3/4", 12-3/4", 18-3/4", 27-3/4",42-3/4", & 57-3/4", Transfer Belt Motor: 1/2HP, Receiving Table: 52" Wide X 60" Long (2 Rows of 25-1/2" Rollers), Return Conveyor: 52" Wide X 290" Long (2 Rows of 25-1/2" Rollers), Roller ...more
Holz-Her #Sprint-1310, Edgebander, 6mm thick
Category: Woodworking Edgebanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Holz-Her
Model: SPRINT-1310
Holz-Her Model Sprint 1310 Edgebander Min/Max Workpiece Thickness: 6mm/ (25/45/50/60mm - Depending on Edge Thickness) Workpiece Width: (Min) 60mm Workpiece Length: (Min) 180mm Feed Speed: 12.5 m/min Feed Motor: 1.5kW (2HP) Work Stations: Edging Feed Glue Station Pressure Unit End Trimming Unit 1 Cutter Unit 2 Cutter ...more
RT Machine has 11 more
listings in Woodworking Edgebanders.
Woodworking Hot Presses
7 Results
Italpresse #XL/10-38-16, PMBO Hydraulic Hot Press, 149" x 63" platens, 209 Ton, 15-3/4" stroke, 10 cyl, 4 HP, new
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/10-38-16
Italpresse Model XL/10 38-16 PMBO Hydraulic Hot Press Platen dimensions: 3,800 x 1,600 mm (149 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 10 Diameter of pressing cylinders: 85mm each Total thrust: 190 metric tons (418,878 lbs) Max. laminating pressure on ...more
Italpresse #XL/6-25-13, PABO Hydraulic Hot Press, 98" x 51" platens, 132 Ton, 15-3/4" stroke, 6 cyl, 3 HP, new
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/6-25-13
Italpresse Model XL/6 25-13 PABO Hydraulic Hot Press Platen dimensions: 2,500 x 1,300 mm (98 x 51 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 6 Total thrust: 120 metric tons (264,554 lbs) Max. laminating pressure: 4.56 kg/cm2 (66 psi) Hydraulic pump: 2.1 kw (3 ...more
Italpresse #XL/8-33-13, PABO Hydraulic Hot Press, 126" x 63" platens, 176 Ton, 15-3/4" stroke, 8 cyl, 4 HP, new
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL/8-33-13
Italpresse Model XL/8 33-13 PABO Platen dimensions: 3,300 x 1,300 mm (126 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4" in.) Number of pressing cylinders: 8 Total thrust: 160 metric tons (352,739 lbs) Max. laminating pressure 100% OF PLATEN AREA 3.3 kg/cm2 (47 psi) Max. laminating pressure ...more
Italpresse #XL8-32-16, PABO Hydraulic Hot Press, 126" x 63" platens, 176 Ton, 15-3/4" stroke, 8 cyl, 4 HP, new
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Italpresse
Model: XL8-32-16
Italpresse Model XL8 32-16 PABO Hydraulic Hot Press Platen dimensions: 3,200 x 1,600 mm (126 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 8 Total thrust: 160 metric tons (176,000 lbs) Max. laminating pressure: 3.9 kg/cm2 (55 psi) Hydraulic pump: 3 kw (4 hp) ...more
Joos #DLP, End-Loading Feed-Through Hot Press, 63" x 124" Pressing Surface, 7.87" H Pressing Area, (6) 90 mm diameter Cylinders
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Joos
Model: DLP
Joos Model DLP 135 5' x 10' End-Loading Feed-Through Hot Press Pressing Surface: 1600 x 3150mm (63" x 124") Height of Pressing Area: 200mm (7.87") Six Pressing Cylinders 90mm Diameter Cylinders Elkom Okotherm Plus Platens Includes Two Recently Purchased Tool-Temp Heating Units This unit requires a rigger for ...more
RT Machine has 2 more
listings in Woodworking Hot Presses.
1" -5.9" Weinig #ProfiJoint, Finger Jointer, 5.9"-27.55" wood entry L, 0.76"-1.96" thickness, 30 HP saw motor, 2023
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Model: PROFIJOINT
Year: 2023
Weinig Profijoint Eagle Furniture Fingerjoint Machine Saw Motor: 22kW (30HP) Hogger & Scoring Motor: 11.5kW (15HP) Wood Entry Length (Min/Max): 150-700mm (5.9" - 27.55") Wood Width (Min/Max): 25-150mm (1" - 5.9") Wood Thickness (Min/Max): 19-50mm (.76" - 1.96") Wood Exit Length(Min/Max): 3000-6100mm (118.11" - ...more
12" Northfield #12-PM, Jointer
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Model: 12-PM
Northfield Model 12-PM 12" Jointer Cutterhead Motor: 5HP Table Size: 97"x17".
12" Northtech #NT-J12, Jointer, 7.5 HP, 230/460 V., 3ph, 4" diameter cut head, 5200 RPM, new
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-J12
Northtech Model NT-J12 12" Jointer 7.5HP Main Motor; 3PH, 230V/460V Dual Voltage Max Planing Width: 305mm (12") True Jointer bed positioning versus less true parallelogram style machines that have multiple pivoting wear points Max Cutting Depth: 19mm (3/4") Cutterhead Diameter: 100mm (4") Cutterhead: 5,200 RPM, (4) ...more
16" H.k. Porter #300CM, Jointer, 3-knife, 5 HP, 3ph, 220/440 V.
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: H.k. Porter
Model: 300CM
Porter Model 300CM 16" Jointer 3 Knife Round Head 5 HP, 3 PH; 220/440 Volt; 13/6.5 Amps Infeed Table: 23" x 52-1/2" Outfeed Table: 19-1/2" x 40-1/2" with Rabbiting Wedge Bed 3" wide x 38" long x 1/2" deep Tilting Fence: 6-1/2" Wide x 53-1/2" Long (Rack & Pinion) Serial No. 6044 This Machine is part of a total ...more
16" Northtech #NT-J16, Jointer, 10 HP, 230/460 V., 3ph, 4" diameter cut head, 5200 RPM, new
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-J16
10HP Main Motor; 3PH, 230V/460V Dual Voltage Max Planing Width: 400mm (16") True Jointer bed positioning versus parallelogram style machines that have multiple pivoting wear points Max Cutting Depth: 19mm (3/4") Cutterhead Diameter: 100mm (4") Cutterhead: 5,200 RPM, 4 row helical head with (2) sided 30 x 12 x 2.5 ...more
RT Machine has 5 more
listings in Woodworking Jointers.
Mini Max #T/124, Woodturning Copy Lathe, 1150mm centers, 1.75 HP, 115 V., tool rest
Category: Woodworking Lathes
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mini Max
Model: T/124
Main Motor: 1.75 HP, 115v, 1ph Tool Rest Flip-up Shield 1150mm Between Centers Serial #: KK/035935.
Wema #Conquest, 3-Axis CNC Turning Lathe, 360 mm Turning diameter, 14.17' Copying length, 70" Between Centers, 5.5 kW, 2007
Category: Woodworking Lathes
Seller: RT Machine
Location: Hughesville, PA
Mfr: Wema
Model: CONQUEST
Year: 2007
WEMA Conquest 3-Axis CNC Wood Turning and Milling Machine. Milling Unit included Hardened and Polished Guide Rails on all axis Turning Diameter up to 360mm Copying Length: 14.17 1780mm ( 70") Between Centers with Short Six Pronged Dog and Short Live Center: 1980mm (78") Main Spindle Drive: 5.5 KW Magazine for Square ...more
Whirlwind Homemade Lathe w/Whirlwind Base, 1750 RPM
Category: Woodworking Lathes
Seller: RT Machine
Location: Hughesville, PA
Mfr: Whirlwind
As Photographed This is a part of a total plant liquidation, Please call for.
Woodworking Mortisers
2 Results
Bacci #MOD, Double Sided Slot Mortiser, (2) Tables & Spindles, 3" D x 4.375" L max Slot Size, 16 mm Chucks, 1.9" diameter Tooling, 3 HP, 9400 RPM, 380/400 V
Category: Woodworking Mortisers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Bacci
Model: MOD
Bacci Model MOD Double Sided Slot Mortiser (2) tables & spindles, (1) table on each side to eliminate dead cycle time. 3 HP - 9,400 RPM Motor, spindles belt driven, 3 HP oscillation motor with (224) oscillations/Min, spindle movement with ball bushings sliding on hardened ground guides. Table assemblies ...more
Comec #MMS-2000, Horizontal Slot Mortiser, 20-Spindle, 300-400 pcs./hr., 8" width x 87" L Table, (5) 4.0/3 HP Motors, 4500/9000 RPM
Category: Woodworking Mortisers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Comec
Model: MMS-2000
Comec Twenty (20) Spindle Horizontal Slot Mortiser Spindle Speeds 4,500 and 9,000 revs/min Single Oscillating carriage with dovetail profile 2,000mm (78.75") length Oscillation motor 3PH Minimum/maximum spindle center to center distance 55/1,945 mm (2.16"-76.57") Five (5) motors for spindles power 4.0/3 HP with two ...more
Leadermac #Speedmac-LMC-923SP, 9-Head Moulder, 9" Width capacity, 2.125" Spindle diameter, 20-260 FPM, 460 V
Category: Woodworking Moulders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Leadermac
Model: SPEEDMAC LMC-923SP
Leadermac Nine-Head High Speed Moulder with Opposing Side Heads for Strip Flooring Width Capacity: 9" Infinitely Variable Speed Feed from 20 - 260 FPM VFD for Variable Speed Head Configuration: Bottom, Top, Bottom, Right, Left, Right/Left (Directly Opposing), Bottom, Top Bottom: 30 HP Top: 40 HP Bottom: 25 HP Right: ...more
Northtech #NT-L6300, 12" 6-Spindle Moulder, 8k RPM, 19-115 FPM, new
Category: Woodworking Moulders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-L6300
Northtech Model NT-L6300 12" Six Spindle Moulder SPINDLE ARRANGEMENT 1st Bottom horizontal: 10HP, 8000 RPM, 1-13/16" 2nd Right vertical: 15HP, 8000 RPM, 1-13/16" 3rd Left vertical: 15HP, 8000 RPM, 1-13/16" 4th Top horizontal: 30HP, 8000 RPM, 1-13/16" 5th Top horizontal: 25HP, 8000 RPM, 1-13/16" 6th Bottom Horizontal: ...more
Northtech #NT-N4230, Four Spindle Moulder, 6000 RPM, 7.5 HP, 19-110 FPM, new
Category: Woodworking Moulders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-N4230
Northtech Model NT-E4230 Four Spindle Moulder Spindle Arrangement: 1st Spindle: Bottom Horizontal: 10HP, 6,000RPM, 1-13/16" Spindle 2nd Spindle: Right Vertical: 10HP, 6,000RPM, 1-13/16" Spindle 3rd Spindle: Left Vertical: 10HP, 6,000RPM, 1-13/16" Spindle Feed System Feed Motor: 7.5HP with Inverter Feed Speed: ...more
Northtech #NT-N6230, Six Spindle Moulder, 6000 RPM, 7.5 HP, 19-110 FPM, new (2 available)
Category: Woodworking Moulders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-N6230
Northtech Model NT-N6230 Six Spindle Moulder Spindle Arrangement: 1st Spindle: Bottom Horizontal: 15HP, 6000RPM, 1-13/16" Spindle 2nd Spindle: Right Vertical: 10HP, 6000RPM, 1-13/16" Spindle 3rd Spindle: Left Vertical: 10HP, 6000RPM, 1-13/16" Spindle 4th Spindle: Top Horizontal: 15HP, 6000RPM, 1-13/16" Spindle 5th ...more
Northtech #NT-S5230, 5-Spindle Moulder, 7.5 HP, 6000 RPM, 40mm diameter spindle, 19-80 FPM, new
Category: Woodworking Moulders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-S5230
Northtech NT-S5230 5 Spindle Moulder Spindle Arrangement 1st Spindle: Bottom Horizontal: 7.5HP 2nd Spindle: Left Vertical: 7.5HP 3rd Spindle: Right Vertical: 7.5HP 4th Spindle: Top Horizontal: 7.5HP 5th Bottom Horizontal: 7.5HP Spindle Speed: 6000RPM Spindle Diameter: 40mm Feed System Feed Motor: 3HP Feed Speed: ...more
RT Machine has 6 more
listings in Woodworking Moulders.
15" Oliver #10014.201, Planer, w/ HCX Helical Cutterhead, 16/20 FPM, 3" cutterhead, 5k RPM, 52 knives, 3 HP, 1ph, new'
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 10014.201
Oliver Model 10014.201 15" Planer with HCX Helical Cutterhead. : Single Phase, 3HP Maximum Stock Width: 15" Maximum Depth of Cut: 1/8" Maximum Stock Thickness: 6" Minimum Stock Thickness : 3/16" Minimum Stock Length: 6" Dust Port Diameter: 4" Feed Speeds: 16/20 FPM Bed Rollers: 2, Adjustable Table Size: 15" x 19-5/8" ...more
18" x 6" Newman #EPR-18, Top & Bottom Planer, 150 FPM, 3/8" thick, 40/25 HP, 230/460 V., 3ph
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Newman
Model: EPR-18
Newman Model EPR18 Top & Bottom Planer Electric Feed Drive Double-Roughing Planer Maximum Feed Opening: 18" x 6" Minimum Stock Thickness: 3/8" Minimum Stock Length: 51" (48" When Butted) Top & Bottom Newman QUIETCUT Helical Carbide Cutterheads Top Head Motor: 40 HP, 230/460v, 3ph Bottom Head Motor: 25 HP ...more
18" x 6" Newman #S-282-18, Double-Sided Planer, 48" Shortest Stock, 18" width x 16' L Infeed Conveyor, 40-150 FPM, 40/25 HP, 3600 RPM
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Newman
Model: S-282-18
Newman Model S-282-18 Double Sided Planer Material Capacity: 18" Wide x 6" Thick Shortest Stock (not butted) 48" Top Head: 40 HP 3,600 RPM Direct Drive Bottom Head: 25 HP 3,600 RPM Direct Drive 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls Infinitely Variable Speed Feed Control from 40 - 150 FPM Newman ...more
18" x 6" Newman #S-282-18, Double-Sided Planer, 40/25 HP, 3600 RPM, 40-150 FPM, variable speed
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Newman
Model: S-282-18
Newman Model S-282-18 Double Sided Planer Material Capacity: 18" Wide x 6" Thick Shortest Stock (not butted) 48" Top Head: 40 HP 3,600 RPM Direct Drive Bottom Head: 25 HP 3,600 RPM Direct Drive 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls Infinitely Variable Speed Feed Control from 40 - 150 FPM Newman ...more
18" Northfield #2, Planer Surfacer, 20-50 FPM, new
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Model: 2
Northfield Model No.2 18" Planer Surfacer : Nominal Size: 18" x 8" Cylinder: 3-1/2" cutting circle, 4 knife, high carbon steel, micrometer-type knife raising screws Knife Size: 5/32" x 1-1/8" x 18-1/8" high speed steel Motors Cutterhead---5, 7-1/2, HP RPM Direct Motor Drive---3600 VEE-belt---4500 (or customer's ) ...more
RT Machine has 35 more
listings in Woodworking Planers.
5" x 16" Northtech #NT-400XL, Double Surface Planer, 20/15 HP, dual 6-row, 5" x 16" cutterhead, 5100 RPM, 25-85 FPM, new
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-400XL
Northtech Model NT 400XL Heavy Duty Chain Drive Series Double Surface Planer CUTTERHEADS 20HP Top, 15HP Bottom Dual (6) Row Helical Cutterhead with double sided 30 x 12 x 2.5mm inserts 5100RPM solid steel cutterheads with Class 7 NSK bearings Cutterhead dimensions: 5" x 16" PRODUCT DIMENSIONS Working thickness 10 - ...more
6" x 109" Northtech #NT-ES636SE, Edge Sander, 3 HP, 1/2" stroke, 3100 FPM, 6.5" x 36" platen, new
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ES636SE
Northtech Model NT-ES636SE Edge Sander 3HP Main Motor 1/2" (12mm) Oscillating Stroke Drive Wheel: 7"x6" Manual Elevation Control Side Table Dimensions: (1) 10"x35" Side Table Tilt: 0-45 Degrees End Table Dimensions: 13"x16" End Table Tilt: 0-45 Degrees Sanding Belt Size: 6"x109" Sanding Belt Speed: 3100FPM Platen ...more
12" x 136" Northtech #NT-ES1248SE, Edge Sander, 7.5 HP, 1/2" stroke, 3200 FPM, 12" x 48" platen, new
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ES1248SE
Northtech Model NT-ES1248SE Edge Sander 7.5HP Main Motor 1/2" (12mm) Oscillating Stroke Drive wheel: 7"x13" Manual Elevation Adjustment Side Table Dimensions: 10"x48" Side Table Tilt: 0-45 Degrees End Table Dimensions: 13-3/4"x16-1/2" End Table Tilt: 0-45 Degrees Sanding Belt Size: 12"x136" Sanding Belt Speed: 3200FPM ...more
12" x 165" Northtech #NT-ES1260SE, Edge Sander, 7.5 HP, 1/2" stroke, 3200 FPM, new
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ES1260SE
Northtech Model NT-ES1260SE Edge Sander 7-1/2HP Motor 1/2" (12mm) Oscillating Stroke 7"x13" Drive Wheel Manual Elevation Adjustment Side Table Dimensions: 10-3/8"x60-11/16" Side Table Tilt: 0-45 Degrees End Table Dimensions: 13-3/4"x16-1/2" End Table Dimensions: 0-45 Degrees Sanding Belt Size: 12"x165" Sanding Belt ...more
12" x 191" Northtech #NT-ES1272D, Edge Sander, 3100 FPM, 15 HP, 1/2" stroke, new
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ES1272D
Northtech Model NT-ES1272D Edge Sander 15HP Motor Drive Wheel: 7"x13" 1/2" (12mm) Oscillating Stroke Side Table Dimensions: 10"x72" Side Table Tilt: 0-45 Degrees End Table Dimensions: 13"x16" End Table Tilt: 0-45 Degrees Sanding Belt Size: 12"x191" Sanding Belt Speed: 3100FPM (2) 4" Dust Ports requiring 436CFM at each ...more
RT Machine has 77 more
listings in Woodworking Sanders.
Casolin #Astra-DGTI, Sliding Table Saw, 128" Size, 10"-16" Saw Blade, 30 mm Saw Blade Bore, 5" Scoring Blade, 8 HP, 3200/4200/5000 RPM
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Astra-Dgti
Model: ASTRA-DGTI
Casolin Model Astra DGTI Sliding Table Saw in Good Working Condition! Sliding Table 128" (3200mm) Saw Motor - 8Hp (6kW) Saw Blade Size (Min/Max) 10"-16" (250/400mm) Saw Blade Bore - 30mm Saw Blade Speed (Variable) 3200,4200,5000 RPM Scoring Motor - 3/4HP (0.6kW) Scoring Blade Size - 5" (125mm) Scoring Blade Bore - ...more
Northfield #36, Bandsaw, w/Electric Brake, 21.3' Blade, 37" x 37" Table, 7.5 HP
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Model: 36
Northfield 36" Bandsaw Blade Size: 21'4" Motor Size: 7.5HP ' Dings Dynamics Model R72025 Electric Brake w/ 25 ft/lbs of Braking Force Blade Guides 37"x37" Table Manual Table Angle Adjustment Mounted Light.
Northfield #36, Bandsaw, 21' Blade, 37" x 37" Table, 7.5 HP
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
Model: 36
Northfield Model 36 Vertical Bandsaw 36" Wheel Diameter 37" x 37" Table 16-1/2" x 19-1/2" Aux.Table 7.5HP; 3PH; 220/440 V Motor 36" Throat Distance 20" Capacity Under Guides Table Tilt 21' & 2" Blade Length Serial no. 782521-K This is a part of a total plant liquidation, Please call for.
Oliver #116, Vertical Band Saw, 18.3'-19.5' Blade, 35.5" Throat capacity, 36" x 36" Table, 17" x 1" Aux. Table, 22" capacity Under Guide, 230 V
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 116
Oliver Model 116 Vertical Band Saw Machine has been refurbished by RTS/Straitoplane with a new set of tires, new brakes, updated controls, new blade guides, a fresh paint job and more! - Ready to Ship! Table Size: 36" x 36" (Tilts from -5 to 45 Degrees) Aux. Table: 17" x 18" Throat Capacity: 35-1/2" Capacity Under ...more
Oliver #260-D, Double Arbor Tilting Blade Sliding Table Saw, 20" Blade capacity, 24" x 44" Main & 17" x 44" Sliding Tables, 230 V
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 260-D
Oliver Model 260-D Double Arbor Tilting Table Saw, in Good Running Condition! Purchase as taken from service, or we can provide a reconditioned price upon request! Ideal for Any Shop Where Ripping and Cross-Cutting will Be Done on the Same Machine Two Direct-Drive Saw Motors, 5 HP 230/460v, 3ph Each Main Table: 24" x ...more
RT Machine has 3 more
listings in Woodworking Saws.
Fletcher Machine #E-ZDoor, Raised Panel Door Machine, 129" width x 48" D max Work capacity, 1" Material Thickness, 24.5" width x 7/8"-2" H Arc, 62" Table Travel, 10 HP
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fletcher Machine
Model: E-ZDOOR
Fletcher EZ-Door Raised Panel Door Machine Moter: 10HP Spindle Capacity: 6" Working Width: 96"-129" Working Depth: 41-48" Max Arch Width:24-1/2" Max Arch Height: 7/8"-2" Max Straight Cut Length: 59" for Rails / 55" for Panels Max Material Thickness: 1" Min Rail Material Width: 1-1/2" Table Travel: 62".
Laguna #Compact, Shaper, 3 HP, 220 V., 4" spindle travel, 10k RPM, 32" x 26-1/2" table, New
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: COMPACT
Laguna Model Compact Shaper The new Compact Shaper from Laguna is already regarded as best in class. Impressive precision fence and wide-range RPM make it a versatile investment for any pro. The fit and finish on this world class machine is incredible.You will be hard pressed to find a better value than the Compact ...more
Laguna #Pro, Shaper, 7.5HP, 4" spindle, 10k RPM, 39-5/16" x 31-7/16" x 3-1/2" table, digital read out New
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: PRO
Laguna Model Pro Shaper 7.5HP The brand new Laguna Pro Shaper combines a precision shaper with s normally found only in much higher priced machines.For starters, the table measures an impressive 31 x 39 and is predrilled to accept most power feeders.The fence has a precision micro-adjustment that is aligned by a solid ...more
Laguna #Pro, Shaper, 5 HP, 4" spindle travel, 10k RPM, digital read out, 39-5/16" x 31-7/16" x 3-1/2" table, 5HP, New
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Laguna
Model: PRO
Laguna Model Pro Shaper 5HP The brand new Laguna Pro Shaper combines a precision shaper with s normally found only in much higher priced machines. For starters, the table measures an impressive 31 x 39 and is predrilled to accept most power feeders.The fence has a precision micro-adjustment that is aligned by a solid ...more
Larick #390, Automatic Shaper, 7.5 HP, 4000-7000 RPM, 0.75 HP feed, 20 FPM feed, New
Category: Woodworking Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Larick
Model: 390
Larick Model 390 Automatic Shaper 7.5HP Cutterhead Motor (10HP Option Available) Variable Speed: 4000-7000RPM 1-1/4" Spindle Diameter 4" to 7" Tool Diameter 6" Wide Track w/ 4 Staggered row of Hold-Down Wheels 3/4HP Feed Motor 0-20FPM Feed Speed Max Material Thickness: 3" Touchscreen Controls Wired for 208/240V 3PH ...more
RT Machine has 9 more
listings in Woodworking Shapers.
Vecoplan #VTH150, Horizontal Wood Shredder, w/ Infeed, 3/4" screen, 4500 PPH, 390 RPM, 2022
Category: Woodworking Shredder
Seller: RT Machine
Location: Hughesville, PA
Mfr: Vecoplan
Model: VTH150
Year: 2022
2022 Vecoplan Horizontal Wood Shredder! Rotor Motor: 75 HP 3/4” Screen Currently Throughput capabilities of 2700lbs - 4500lbs an hr through current screen dependent on material Cutting Head: 30 Cutters with 40mm Indexable Teeth Machine opening: 6" x 22" Rotor Speed: 390 RPM Includes 2022 Vecoplan vibrating ...more
Weima #Tiger-600, Horizontal Wood Shredder, 14" diameter Rotor, 6" x 23.6" Material Opening, 1" Screen, 60 HP, 460 V, 2014
Category: Woodworking Shredder
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weima
Model: TIGER 600
Year: 2014
2014 WEIMA Model Tiger 600 Horizontal Wood Shredder, Refurbished By WEIMA in 2019! Rotor Motor: 60 HP Material Opening: 6" x 23.6" 14" Diameter Rotor Currently w/ 1" Screen Replaceable Bolt-On Cutter Knives Includes 2019 WEIMA Vibro 600 Vibrating Feed Conveyor Includes Standalone Operator Control Cabinet 460v, 3ph ...more
Woodworking Spindle Shapers
5 Results
Northfield, Double Spindle Shaper, 4-1/2" adj., 8k RPM, 4-1/2" throat, new
Category: Woodworking Spindle Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
rmation: Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance Available with either 24" or 30" between spindle centers Spindles are available to 1-1/2" diameter and up to 8" in lengthUnder table dust outlet improves dust & chip ...more
Northfield, Large Top Double Spindle Shaper, 8k RPM, 4-1/2" throat, 42" x 84" table, 4k & 6k RPM, NEMA 12, new
Category: Woodworking Spindle Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northfield
rmation: Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance The 42" x 84" table provides room for mounting feeders and gives full support for large jigs and fixturesSpindles are available to 1-1/2" diameter and up to 8" in length Under ...more
Northtech #NT-880HSK, Spindle Shaper, 3000-13350 RPM, 10 HP, 1-1/3" diameter spindle, 230/460 V.
Category: Woodworking Spindle Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-880HSK
Northtech NT 880HSK Spindle Shaper 3,000 - 13,350RPM, 10HP inverter controlled spindle (1) 1-1/4'' x 4" HSK-63F spindle included HSK-63F spindle release system is developed by Andi CNC Machining Centers Spindle tolerance of.0001" Includes sensor light to ensure proper mating of the chucks as well as correct ...more
Voorwood #A26, Dual Spindle Coping Shaper, 42" x 16" table, new
Category: Woodworking Spindle Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Voorwood
Model: A26
Voorwood Model A26 Dual Spindle Coping Shaper Two Shaper Spindles (Available with One as Well) Stackable up to Three Tools Per Spindle Cope up to Seven 2" Wide Rails in One Pass One Part Every Five Seconds! Capable of Handling Any Length Part Table Size: 42" x 16" Options: Quick-Change Spindles, Power Feed, Single ...more
Whitney #91, double spindle Shaper, w/ Feeders, 30", 5 HP, 3ph, 220/440 V., 7.5" under nut, 1-1/4" spindle, 66" x 42" table, 7200 RPM
Category: Woodworking Spindle Shapers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Whitney
Model: 91
Whitney Model 91 Double Spindle Shaper Distance between spindles: 30" Motors: Approx 5HP; 3PH; 220/440 volt; 60cy Each Spindles: 1-1/4 " diameter with 7.5" Under Nut Table size: 66" x 42" Spindle speed: 7200 RPM Weight: 3050 lbs. Serial no. 14297.
Woodworking Tooling & Accessories
2 Results
Mereen-Johnson, Moving Blade Parts from the Model 312DC/SR2 Gang Rip Saw
Category: Woodworking Tooling & Accessories
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 312DC/SR2
Newman, H3D Cutter Heads, from Model EPR-24SS Double Roughing Planer, 23" Size, (10) Row Cutterhead w/(30) Cutter Inserts per row
Category: Woodworking Tooling & Accessories
Seller: RT Machine
Location: Hughesville, PA
Mfr: Newman
Model: EPR-24SS
24" H3D Heads out of a EPR-24SS 10 Row Cutterhead with 30 - 14.75x14.75x2.5 Cutter inserts per row Total End to End Width - 48.75" The cutterheads were originally installed on a 2003 Newman EPR-24SS Double Sided Planer.
Wrapping Machines (including Shrink Wrappers)
2 Results
Orion #HPD-OPTS-T07,FWS,SPK, Turntable Pallet Wrapper, 48" x 48" turntable, 110" max height, 15 RPM, 115 V., 1ph, 2022
Seller: RT Machine
Location: Hughesville, PA
Mfr: Orion
Model: HPD-OPTS-T07
Year: 2022
Orion Turntable Semi-Automatic Wrapping Machine 48" x 48" Turntable for Loads up to 55" x 55" Octagonal Turntable for Easy Forklift Loading Maximum Load Capacity is 6,000 lbs. Max Load Height is 110" Automatic Force to Load for Even Film Tension 15 RPM Variable Speed 7" IntelleVue Color, HD Touch Screen HMI Serial no. ...more
Robopac #Orbit-12, stretch wrap ring machine, 53" diameter, 10-80 RPM, automatic cut & clamp, 480 V., 2018
Seller: RT Machine
Location: Hughesville, PA
Model: ORBIT-12
Year: 2018
Ring Diameter: 53" Adjustable Ring Rotation Speed from 10-80 RPM Operating Temperature Range: 41 - 104 Deg F Automatic Film Cutting & Clamping Between Wrap Cycles Film Carriage Unit: Friction Roller w/ Quick Release Constant Film Tension Infeed & Outfeed Photocells to Detect Product's Presence Top Pressure ...more
