1 / 10
Click to zoom in
1 / 10
For Sale by RT Machine
Surplus Record Dealer Since 2025
Location: Hughesville, PA
Contact Sales
Phone Number: 570...> Show Phone Number 570-584-2002
Let the seller know you found their listing on Surplus Record!
Description
- Ogden Model SL3660 RFS Protec SL Solid Wood Radio Frequency Gluing Machine
- Curing area: 36" x 60" x 2" thick.
- Clamping pressure is applied by multi-power (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the Model SL36x60 reaches full capacity at 100-psi plant air pressure.
- Edge pressure is applied by eight (8) each pusher shoes, each with a 4" bore x 4" stroke twin-piston multi-power pneumatic cylinders.
- Top platen pressure is applied by two (2) 5" diameter x 16" stroke pneumatic cylinders through a cantilever arm that keeps the footprint to a minimum while still allowing the operator full access to the platen area.
- The platen is set at a 45-degree angle and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement.
- The internal solid state RfsProtech 6KW Generator cures approximately 600 square inches of glue line per minute.
- Two-hand no-tie-down safety controls for closing the top platen.
- The machine is controlled by a PLC for dependability and efficient maintenance. All controls will be provided for safe and efficient operation. The operator screen permits efficient operation, and the included press diagnostics screens assist in trouble-shooting when the need arises.
- All necessary RF controls, including buttons, meters, and PLC operator interface panel are mounted on a control panel attached to the left front of the press.
- Interlocked top platen and safety switches on all access doors insure operator safety.
- Power requirements are 480 volt, 60 cycle, 3 phase electric.
- Powered In-Feed table with motor and controls
- Out-feed steel deck
- Located at RT Machine's facility and ready to ship!
Get Your Price from RT Machine!
Buyers Who Viewed This Listing Also Viewed:
L & L #DA-80H, RF Edge Gluer, 64" x 124" x 4-1/2" capacity, 10 kw gen, 5 HP hydraulic, 2" bore, 4" stroke, 1999
Category: Edge Gluers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: L & L
Model: DA-80H
Year: 1999
L & L - DU ALL DA-80 H: High Frequency Press -- For assembly, clamping, and quick curing of edge banding & edge gluing; platen mounted at 30 angle; top lid opens 45. -- Capacity: 64" x 124"; Up to 4-1/2" thick; hydraulic edge & end pressure enable press to accommodate solid stock up to 4-1/2" thick. : -- ...more
Radio Frequency Services #SL3648N5A01A0100, Edge Gluer, 40 Amps, 240 V
Category: Edge Gluers
Seller: HGR24
Location: Euclid, OH
Mfr: Radio Frequency Services
Model: SL3648N5A01A0100
Inventory No. 0226-187-0002 Manufacturer Radio Frequency Services Model No. SL3648N5A01A0100 Name Edge Gluer Arrival Date 03-11-2026 Dimensions L x W x H (inches) Unavailable Capacity 40 AMPS Electrical 3/240 Weight (lb.) 2080 Category Woodworking Condition Used Available Quantity 1 Serial No. 92-245 Item (1,700#) ...more
