24 Results
Burkle #Multifoiler-BTF1528-1400, Membrane Press, 59" x 110.2" Platen Capacity, 400 V., 2010
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: MULTIFOILER-BTF1528-1400
Year: 2010
BURKLE BTF 1528-1400 Automatic Pin Press with (2) Trays, and Panel Turnover Device.Designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without the use of a membrane. This configuration allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film ...more
JUST ADDED!
Greco #VP-410-S, double ended membrane vacuum press, 48" x 120" max part size, infrared oven, PLC touch screen
KD Machinery | Scottsdale, AZ
Category: Vacuum Membrane Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Greco
Model: VP 410-S
Used Greco VP 410-S Thermoformer for Sale. This pre-owned Greco thermoformer machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Greco Thermoformer, please feel free to contact us. You may Activate Pricing to view the price of this ...more
Greco #VP-410-S, Membrane Vacuum Press, (2) tray, 48" x 120" working area, 57" x 130" over all size, 2007
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Greco
Model: VP 410-S
Year: 2007
GRECO INC. VP410-S Thermoformer with two 4x10' trays. Heating chamber (stationary) in the center with vacuum trays on each end which moving in-and-out manually. -- Size: Two shuttle trays,. 48" x 120" Working area, 57" x 130" over all size; -- Vacuum Pump: BUSCH Rotary vane single-stage Vacuum Pump, 3 HP direct ...more
Iberpresse #PRA-1-1423, veneer membrane press, 55" x 90" platen, 300 ton, 2001
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Iberpresse
Model: PRA-1-1423
Year: 2001
IBERPRESSE PRA-1-1423 Veneer Membrane press Platen dimensions of 55" x 90" (1,400 x 2,300 mm); bottom platen, same size top platen with a 47" x 82" (1,200 x 2,100 mm) reset for membrane. -- Infeed: Right-to-left through feed, flat power (indexed for charging a load) conveyor, 96" L x 55" W. -- Outfeed: Gravity roller ...more
Kolmag #PSM.2L.V.265X130, Membrane Press, Fluid, 106.3" x 52" Platen, (3) 10.43" diameter Pressure Cylinders, (2) Shuttle Tables, 90 kW, 1999
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kolmag
Model: PSM.2L.V.265X130
Year: 1999
KOLMAG - ML RE 2L 265 X 130: Membrane (Fluid) PressIncludes: (2) Shuttle Tables. Design RTF (Thermofoil panels on MDF/Particle Boards) in PVC - PET - TRF - ABS and Membrane Veneer work.Capable of: Laminating layers of different thickness on prepared panels of MDF or particleboard.Italian-made, this robust Heavy-Duty ...more
Get email updates for newly added Vacuum Membrane Presses
Vacuum membrane presses are machines used to bond flexible materials like veneers or laminates to wood surfaces with vacuum pressure. These machines ensure smooth, bubble-free finishes through even pressure distribution, making them ideal for intricate shapes and curves. Vacuum membrane presses are essential in woodworking for producing high-quality furniture, cabinet doors, and decorative wood products.
Orma #PM/Air/System, Membrane Press, 230 V, 106 Amp, 60 kW, 2007
Machine Tool Bids | Chicago, IL
Category: Vacuum Membrane Presses
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Orma
Model: PM/AIR/SYSTEM
Year: 2007
Used 2007 Orma PM/AIR/SYSTEM. Machine Tool Bids offers plenty of Miscellaneous and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Orma PM/AIR/SYSTEM or any of our machines., MACHINE, Voltage: 230V, Frequency: 60Hz, Power: 60Kw, Current: 106 A.
Ribex #Eco-B, Vacuum Membrane press, 12" H, 95-3/4" x 64" table frame, 92-3/4" x 48-3/8" area, 11-7/8" thick, 2 HP, 61 CFM, 68 Dba, 2026, new
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ribex
Model: ECO-B
Year: 2026
RIBEX - ECO B,.Vacuum Press for Work up to 12" in Height -- The "ECO B" Series Tall Vacuum Press: Combines the s of the Larger "ROBO" Unit & the cost advantage of the ECO series and incorporates a 12" height part working height. -- New generation RIBEX "ECO B" Vacuum Press Machines used for 3D lamination of PVC ...more
Ribex #Robo, Vacuum Membrane Press w/Twin Table, 107.5" x 49.2" x 3.5" thick usable Table area, 100 m3/hr. Vacuum Pump, 30 kW, 2019
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ribex
Model: ROBO
Year: 2019
RIBEX ''ROBO'' VACUUM MEMBRANE PRESS WITH TWIN TABLE. - Usable table area of 2,730 x 1,250 x 90 mm thickness (107.5"; x 49.2"; x 3.5"; thick)- Standard overall table size is 2870 x 1400 x 90 mm (`113 x 55";). Standard vinyl rolls customer is using are 57" wide.- double worktable (automatic ...more
Ribex #Robo, Vacuum Membrane press, 112" x 64" table frame, 106" x 48-3/8" area, 3-1/2" thick, 26.5 kW, (100) programs capacity, 2026, new
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ribex
Model: ROBO
Year: 2026
RIBEX - ROBO,.Vacuum Press - Available as Single or Double Table, with or without Membrane.High End model, "new generation" RIBEX Vacuum Press Machines used for 3D lamination of PVC foils to MDF board. RIBEX Vacuum Press Technology is ideal for: Doors & Panels for kitchens, bathrooms, and furniture applications.: ...more
Ribex #Roco, Thermoforming Vacuum press, 15 kW total, 2600 x 1250 mm chamber, 230 deg C, 2770 x 1300 mm table, 2026, new
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ribex
Model: ROCO
Year: 2026
RIBEX ROCO THERMOFORM STANDARD -- HEATING UNITHeating Power : 13.5 kW; Total Power: 15 kW; Heating chamber dimensions 2600 mm x 1250 mm; max. working temperature 230 C; uniform heat distribution inside heating chamber by Patented RIBEX ROCO Hot Air Circulation System; 150 mm heat insulated walls; heat resistant wire ...more
Ribex #Roco-Maxi, Thermoforming Vacuum press, 20 kW total, 3800 x 1250 mm chamber, 200 deg C, 4100 x 1400 mm table, 2026, new
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ribex
Model: ROCO-MAXI
Year: 2026
RIBEX ROCO MAXI THERMOFORMER. Vacuum Press and Hot Air Oven. Suitable Thermoforming, Bending and Sublimation. --HEATING UNITHeating Power : 18 kW; Total Power: 20 kW; Heating chamber dimensions 3,800 mm x 1250 mm; max. working temperature 200 C; uniform heat distribution inside heating chamber by Patented RIBEX ROCO ...more
Schuetz Tool #SS-48-96-H, Membrane Veneer Press, 55" x 106" Press capacity, (2) Shuttle Tables
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schuetz Tool
Model: SS 48 96 H
Schuetz Tool Bladder Press, for veneer laminating (not thermofoil).: -- (2) Shuttle tables, approx. 55"; x 106"; press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200F. Can use PVA which would extend cycle time to approx. ...more
Shaw Almax #TL3-4-803, Membrane Vacuum Press, 2-Tray, 58-3/4" x114-1/2" platen ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd
Carolina Machinery Sales | Monroe, NC
Category: Vacuum Membrane Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Shaw Almax
Model: TL3-4-803
Shuttle tray design: (2) trays, Platen size: 58-3/4” x 114-1/2”, Working capacity: 48” x 110” x 2”, Uses both pressure and vacuum to apply vinyl, foil and veneer, Vacuum pump: approx. 5 HP, Membrane pressure: up to 60psi, Vacuum pressure: up to 80psi, Heated platens: upper up to ...more
Shaw Almex #TL-6-59-114, Thermoforming Vacuum Press, 59" x 114" platen, 15 kW heating elements, 2003
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Shaw Almex
Model: TL-6-59-114
Year: 2003
SHAW-ALMEX TL6-59-114V Thermo-Laminating Press, Set up for veneer work.;Membrane operation for veneer laminating. A membrane is currently installed for 3D veneer work. Platen dimensions 59" by 114". -- Working Principle: Operates without hydraulic cylinders. A platen-size rubber pressure bag under the lower platen ...more
Vac-U-Clamp #FT-800+, Thermoforming Vacuum Press, Clam Shell Type, 50" x 105" Work Area, 6-8 min. Curing Time, 18 kW
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Vac-U-Clamp
Model: FT-800+
VAC-U-CLAMP - FT-800+: Thermoforming Vacuum Press -- Clam shell type thermofoil Press. 50" x 105" Working area. Curing time: 6 - 8 Minutes based on foil thickness. 18,000 Watt quartz Infrared Heating Elements. 17 Oiled Vacuum Pump with: 30-Gallon reserve tank. PLC Control; front mounted. Zinc plated steel platen. ...more
Vac-U-Clamp #FT-900, thermoforming vacuum press, 52" x 105" working area, 2021
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Vac-U-Clamp
Model: FT-900
Year: 2021
VAC-U-CLAMP - FT-900: Thermoforming Vacuum Press FT-900 ThermoFoil - Vacuum Press is a “clam shell"; type thermofoil press specifically designed for smaller shops or where shop space is limited or as a backup press for larger production shops that encounter short run requirements. -- FT-900 - Thermofoil Vacuum ...more
JUST ADDED!
Vac-U-Clamp #Thermofoil-FT-800, membrane vacuum press, 50" x 105" platen, 24,000 watt quartz elements, 2016
KD Machinery | Scottsdale, AZ
Category: Vacuum Membrane Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Vac-U-Clamp
Model: THERMOFOIL FT 800
Year: 2016
Used Vac-U-Clamp Thermofoil FT 800 (2016) Thermo Former for Sale. This pre-owned Vac-U-Clamp thermoformer machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Vac-U-Clamp Thermo Former, please feel free to contact us. You may Activate ...more
Wemhoner KT-M-15/28-240, Membrane Vacuum Press, 110.2" x 59.1" platen, (3) Tray, 240 Ton, 9.84" daylight, 1994
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Wemhoner
Model: KT-M 15/28-240
Year: 1994
WEMHONER VARIOPRESS KT-M-15/28-240 Membrane Press with Three VacuumTrays and Storage Rack with feed/Cut. Data: 2,800 mm x 1,500 mm (110.2" x 59.1") platen size. Press system, Hydraulic single daylight downstroke press. -- Vacuum Tray Tables: Approx 2,800 x 1,500 mm (110" x 59"). Three (3) tray carriage with an ...more
Wemhoner KT-M-15/28-240, Membrane Vacuum Press, 110.2" x 59.1" platen, (3) Tray, 240 Ton, 9.84" daylight, 1997
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Wemhoner
Model: KT-M 15/28-240
Year: 1997
WEMHONER KT-M-15/28-240 Membrane Press with Three Vacuum Trays. Data: -- 2,800 mm x 1,500 mm (110.2" x 59.1") platen size. Press system, Hydraulic single daylight downstroke press. -- Construction: Press body consisting of steel frames bolted together to form a closed unit. Each frame manufactured is torch cut out of ...more
Wemhoner #KT-MB-28/15-240, membrane press, VarioPress Basic+, Siemens Simatic Control, Variopin
RT Machine | Hughesville, PA
Category: Vacuum Membrane Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Wemhoner
Model: KT-MB-28/15-240
MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x ...more
Wemhoner #Professional-3000, membrane press w/ pin system, Siemens S7 PLC Control, 2004
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Wemhoner
Model: PROFESSIONAL-3000
Year: 2004
WEMHONER - KTM-34/15-300 "PROFESSIONAL 3000, VARIOPRESS": Membrane Press with (3) Shuttle Trays; Automatic Pin System; Turnover Device; Paternoster.A High Production Line of appx.: (20 - 30) Cycles/Hour using heated platen dimensions: 3,400 mm x 1,500 mm (133.8" x 59").For 3D applications with high capacity. Use of ...more
JUST ADDED!
Black Brothers/Almex #TF3-4-8, thermoforming vacuum press, 52" x 100" table, 2" max panel, 14 PSI vacuum, 250°F max, 3 HP, 2014
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Model: TF3-4-8
Year: 2014
BLACK BROTHERS/ALMEX TF3-4-8,.Single-Tray Thermoformer Vacuum Press w/Roll Storage Carousel & RAPHA Jig Pin SystemThe economical solution for making 3D Thermofoil components. -- : Table dimensions: 52 x 100" (1,329 x 2,540 mm). -- Max. panel thickness: 2". -- Vacuum pressure: 14 PSI (max. possible vacuum is the ...more
JUST ADDED!
Shaw-Almex #TL5-4-8, thermoforming vacuum press, 54" x 108" top platen, 46" x 100" tray, 1" max part, 300°F max, 5 HP, 1999
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Model: TL5-4-8
Year: 1999
SHAW-ALMEX TL5-4-8 Thermofoil Laminating Press with (1) manual tray. Membrane or "membrane-less" operation for vinyl foils & veneer products; by flipping a switch at the control console it changes from membrane to membrane-less pressing. Membranes are normally about 3 mm thick. -- Principle of Operation: Uses ...more
JUST ADDED!
R.A. MacDonald #VF-Multivac, thermoforming vacuum press, 30" x 144" work surface, 6'/12' 2-zone heater, silicone membrane
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Model: VF-MULTIVAC
R. A. MACDONALD VF-MULTIVAC Thermoforming Vacuum Press: -- :Press has a 30" wide x 144" long work surface. -- The machine uses heating lamps & silicone membrane for the preparation of the material and the subsequent forming application around the shaped parts. -- The forming cycle is performed by the use of a ...more
