Buy or Sell Your 200 KW Generators

REC # 2586, (1) Used 500 KW LOUIS-ALLIS KATO / TELEDYNE Hydro-Electric Generating System; MFG. 1985, Turbine (Runner):, Manufacturer.Teledyne, Type.Francis (vertical axis), Diameter (nominal).72", Design Head.20.6 ft, Rated Discharge.332 cu.ft/sec, Radial Bearing.Thordon Type, Wicket Gates:, Type.Butterfly ...more

SKU: 122890, Condition: Used, Dimensions: 132.00 (H) x 132.00 (W) x 264.00 (L) inches, Additional :, - Outside Dimensions (LxWxH): 264in. x 132in. x 132in., - Inside Dimensions (LxWxH): Pending, - Includes:, - 770kVA Step-Up Transformer 540V Pri., 4160Y/2402V Sec., - ABB 710kW (950HP) Variable Frequency Drive (VFD), - ...more

2012 Sandvik DT820 Jumbo Drill, Make: SandvikModel: DT820Type: 2-Boom JumboYear: 2012Hours: Engine: 6,562 HoursLeft Boom: 3,215 HoursRight Boom: 3,435 HoursElectric Motors: 6,338 and 6,050 HoursCondition: Used ConditionView Spec Sheet Below Model Key s: Coverage Area: 110 m² (14,210mm x 8,420mm)Hydraulic Rock ...more

TYPE:6-HI, BUILT:2002, MODERNIZATION IN 2010, ROLLED MATERIAL:CARBON STEEL SAE1006, S235-S550, C45-C75, IF, STRIP WIDTH MAX.: 1150 MM, THICKNESS:IN 3.5 MM OUT 0.30 - 2.5 MM, SPEED MAX.: 1000 M/MIN, COIL I.D./O.D.508 MM / 2000 MM, ROLL SEPARATION FORCE 800 TON, MAX. TENSION 9000 KG, BACKUP ROLL DIAMETER: 1050 MM - 1150 ...more

Make: DMC (Korea), Year New: 2018, Material: HR, CR, Pipe Diameter: 50mm - 168mm, Wall Thickness: 1.4mm - 7mm, Speed: 20 - 60 mpm, Pipe Cut Tolerance: 2mm, Max Pipe Length: 6 - 12 meters, Coil Width: 150mm - 600mm, Coil ID: 610mm, Coil OD: 1600mm - 2000mm, Coil Weight: 12 ton, Entry Floor Standing Coil Cat, Mandrel ...more

600 KW KOHLER / MITSUBISHI DIESEL GENERATOR, -Mfg. 2006, -Generator End Model Number: 5M4030, -Generator Set Model Number: 600REOZM, -Generator Set Serial Number: 2089653, -Generator Set Spec: GM30612-GA1, -Standby Rated at 600 kw / 750 kva, -Currently Setup 277/480 Volt, 3 Phase (902 Amps), -10 Lead Reconnectable ...more

Make: Aogang, Condition: Brand New (Never Used), Mill Diameter: 25mm - 102mm, Material Thickness: 0.8mm - 4mm, Square Tube: 20 x 20 - 80 x 80, Strip Width: 80mm - 320mm, Material: HR, CR, Galv,., Tensile Strength: 520 Mpa / Yeild: 240Mpa, Mill Speed: 100 meters per minute, Direction: Left to Right, Double Mandrel ...more

Tube Diameter.1" - 3-1/2" (26.7mm - 88.9mm), Wall Thickness.0.080" -.250" (2.0mm - 6.3mm), Mill Speed.400 ft/min (120 m/min), Max, Tube Length.5' - 46' (1.5M - 14M), LINE CONFIGURATION, DOUBLE UNCOILER, MANDREL TYPE, Coil ID.24" (610mm), Strip Width.3" - 11" (75mm - 280mm), Snub Roll, Peeler Table, Crop Shear ...more

At present we have for sale as follows :, 6500ton Open Die Forging Press x 2units Manufacturer: HJ (Korean make) / Seonam (Korean make), Installation: 2006/2008, Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons, Up-setting force (static working ...more

ELUMATEC SBZ 151 5-AXIS CNC PROFILE MACHINING CENTER, New 2016, 5-Axis CNC automatic profile machining center dsigned for flexible and efficent machining of aluminum and thin walled steel profiles. All operatons, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile ...more

Very Low Hour CAT C175-16 3000kVA Generator Set; Sound Enclosure; Immaculate Condition – 82 Original Hours; 3000kVA Standby Rated; 50Hz; 400V; EMCP 4.2 Control Panel; 5000A Breaker; Six Units In Stock – Immediately Available, GENERATOR SET: Manufacturer : Caterpillar Manufacturer : Caterpillar Package ...more

Tube Diameter: 2 3/8" - 7 1/2", Wall Thickness:.125" - 3/8", Mill Speed: 200 FPM, Tube Length: 16'- 60', COMPLETE TUBE MILL LINE INCLUDING, Quick Change Mill with Spare Set of Rafted Stands, OTO MILLS Shear & End Welder New, 2014 Drives and Gear Boxes New, 2014 OTO MILLS TAC 90 Cut Off Saw New in 2018 ...more

Subject to availability, prior sale, and terms and conditions of FRANKE CNC Sales Agreement, we offer for your consideration:, One used 2006 +GF+ MIKRON UCP 600 Vario 5-Axis Machining Center with Pallet Changer:, Machine was manufactured at +GF+ in Nidau, Switzerland 4/2006, Machine was first installed new in the USA ...more

Product Clearance:, Conveyor Belt 12” Wide by 12” Tall Conveyor, Stainless Pumps, Stainless Pipes, Stainless Chip Basket, Spray Nozzles with swivels, Stainless Steel Filter 30” Wash 100 Micron, Stainless Steel Filter 30” Rinse 100 Micron, 7.5 HP Stainless Wash Pump 60 GPM, 7.5 HP Stainless ...more

, Year Manufactured: 2003, Capacity: 63.5 X 3.0tm/m, Pipe Diameter: 15.9- 63.5m/m, Wall Thickness:0.5t ~3.0tm/m, Pipe Length 4-14M, Line Speed: 20M ~ 120m/min, l) Uncoiler, Type: Double Swivel Type, Cap.: Hoop Width Max: 190m/m, Coil Out Dia. Max: 1,800m/m, Coil In Dia. Max: 508m/m, Coil Weight Max: 2.5ton X 2 ea, 2) ...more

SKU: 127578, Condition: Used - Like New, Made In: UNITED STATES, Dimensions: 97.00 (H) x 32.00 (W) x 31.00 (L) inches, Additional :, Starter 1 - 298 kW / 63 A:, Model: CR194A118F2, Catalog: 0921X0662V02C01, Load Type: IND, Motor Power: 298 kW, Full Load Current: 63 A, Voltage: 4160 V, Interrupt Rating: 350 MVA ...more

MECO MEC 100 PREMIUM CNC keyseater, 25.59" part height with 40" dia capacity, Maximum productivity for large slotting machines, A MECO broaching machine for high production of large parts, allowing our customers to work with any type of slotting. The MEC 100 PREMIUM CNC is capable of working with a max height of 25.6" ...more

ZEMAN Z6 (SBA) STEEL BEAM ASSEMBLY WELDING CELL, S/N: SBA 532.605, MFG: 2019, STOCK NO: 87373, CAPACITIES:, BEAM SIZES:, HEIGHT: 150 MM MIN 1100 MM MAX, WIDTH: 80 MM MIN 500 MM MAX, LENGTH: 3000 MM MIN 12000 MM MAX, BEAM TYPES:, H BEAMS 150 MM MIN, 1100 MM MAX, WELDED H BEAMS: YES, CORRUGATED SIN BEAMS: YES ...more

ELUMATEC SBZ 151 CNC Profile Machining Center - 10.3 M5-Axis CNC automatic profile machining center: Designed for flexible and efficient machining of aluminum and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is ...more

ELUMATEC SBZ 151 CNC Profile Machining Center - 10.3 M5-Axis CNC automatic profile machining center designed for flexible and efficient machining of aluminum and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is ...more

FIBER LASER CUTTING MACHINE: Laser Power 3kw Centrifugal Fan Included Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 1*40'HQ Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free ...more

, Manufacturer: DMC, Tube Outer Diameter Max: 168.3 mm (6.626”), Tube Outer Diameter Min: 50.8 mm (2.000”), Wall Thickness Max: 7.0 mm (0.276”), Wall Thickness Min: 1.4 mm (0.055”), Tube Cut Length Max: 12,000 mm (472.44”), Tube Cut Length Min: 6,000 mm (236.22”), Line Speed Max: 60 ...more

, PURPOSE: COIL TO COIL HORIZONTAL FURNACE TO BRIGHT ANNEAL STAINLESS STEEL, STRIP IN A CONTROLLED HYDROGEN/NITROGEN ATMOSPHERE USING A WEB LOOP TENSION, CONTROL SYSTEM TO PREVENT STRETCHING AND SHAPE DEFORMITY., MAXIMUM WIDTH OF STRIP: 16" (406MM), THICKNESS OF STRIP: 0.005" - 0.060" (0.127MM - 1.5MM), MAXIMUM ...more

FIBER LASER CUTTING MACHINE: Laser Power 60kw Centrifugal Fan Included Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 1*40'FR+1*40'HQ Payment Terms 30% down payment, 70% before shipment. Warranty Five years limited warranty for main parts. ...more

DOOSAN PUMA TT1500SY TWIN SPINDLE TWIN TURRET CNC LATHE:Control: Fanuc 18i-TBMax. swing: 9.1″Max. turning diameter: 9.05″Max. turning length: 4.7″Number of spindles: 2Spindle speed (main & sub): 6,000 RPMSpindle motor (main & sub): 20 HPSpindle bore (main & sub): 2.44″Spindle nose ...more

Spec, Standard working area 10′ x 5′ (3050 x 1550 mm), Optional working area 13′ x 6.5′ (4000 x 2000 mm) / 20′ x 6.5′ (6100 x 2050 mm) / 26′ x 6.5′ (8000 x 2000 mm), Optional Laser Wattage 1500W / 3000W / 6000W, X-axis distance 120″ (3050 mm), Y-axis distance ...more

Recard Crescent Former Tissue Machine, Manufacturer: RECARD, Type: Crescent former, Year of construction: 1998, Material width on reel: 2750 mm, Production speed: up to 1400 m/min, Grammage: 14 to 23 GSM, Raw material: Virgin pulp, Drive voltage: 400V 50 Hz, Drive type: (AC & DC 400V), DCS: Siemens S7-400 (Include ...more

MTU Engine : Engine Model: 20V4000G43Engine Type: 4 Stroke, Water CooledAspiration Type: Turbo Charger, Inter-coolerPower: 2740kWhRPM: 1800Number of Cylinders: 20Cylinder Configuration: 90° VBore: 170mmStroke: 210mmDisplacement: 95.4 LiterCompression Ratio: 16.4:1Combustion System: Direct InjectionMean Effective ...more

RCP1-1200 Danobat CNC Internal Grinder, Electronic Unit Balance System, SB-4500, Head Balance System, SB-4400-G, As Is, DANOBAT RCP1-1200 CNC INTERNAL GRINDER, S/N 2181 Year: 2000, STANDARD, I.D. travel ...more

SKU: 137449, Model: 6068HF485K,L,O, Year: 2007, Condition: Used, S/N: PE6068L004180, Dimensions: 63.00 (H) x 188.00 (W) x 44.00 (L) inches, Additional :, Number of cylinders: 6, Displacement: 6.8 L (415 cu in), Bore and Stroke: 106 x 127 mm (4.17 x 5.00 in), Compression Ratio: 17.0 : 1, Engine Type: In-line, 4-Cycle ...more

DANOBAT R1-A CNC ANGLE HEAD GRINDER, S/N 2179 Year: 2000, STANDARD, Maximum distance between centers………………………………. 39”, Centers ...more

EquipmentStructural Steel Processing LinesStructural Steel Processing Equipment2019 Zeman SBA Compact Plus 1100, Installed in 20202019 Zeman SBA Compact Plus 1100, Installed in 2020Have one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell ...more

Used Zeks Model 1200HSFA608N, Air dryer., Refrigerant - R22, Lbs.10, MAWP (PSIG) 200.

Used Generac 350kW Diesel generator. This Standby power unit is enclosed and has approximately 503 hours of use. It provides Three-Phase power at 120/208v and is ready to ship from our Jacksonville, Florida facility., Model: 8DC4, Capacity: 800, Amps: 200, Volts: 120/208v, Phase: Three-Phase, Fuel Type: Diesel.

Model E2W 200 Tonnage 200 tons Bed Size 2150 x 1092 mm, Bed Size: 2150 mm x 1092 mm / 84.64'' x 42.9'', Slide Dimensions: 1850 mm x 1093 mm / 72.83'' x 42.99'', Shut Height: 500 mm / 19.88'', Adjustment: 120 mm / 4.72'', SPM: 30-50, CHS Feedline:, Model: ...more

Used Generac 50kW Natural Gas generator. This Standby power unit s a Weatherproof enclosure and has approximately 1 hours of use. It provides Three-Phase power at 120/208v and is ready to ship from our Brighton, Colorado facility., Model: 10000034343, Capacity: 50kW, Amps: 200, Volts: 120/208v, Phase: Three-Phase ...more

CPT-331A, ONE (1) ELECTRIC CT, TYPE JKW-200, CAT. #757X030010, 34500 VOLT, 200 KV BIL, 60 HERTZ, 200/100:5 RATIO, METERING ACCURACY @100:5 0.3 B-0.1 THRU B-1.8, METERING CLASS ACCURACY @200:5 0.3B THRU B1.8, RELAY ACCURACY @100:5 T200, RELAY CLASS ACCURACY @400:5 T400.

Manufacturer APC Symmetra Equipment Type UPS Model Family Symmetra Model # SY16K Rating (kVA) 16 kVA – 11.2 kW Input Voltage 200-240V Output Voltage 200-240V Frequency 50/60 Hz Status In Stock.

Volts Max: 200 Max Amps 68, PREOWNED MITSUBISHI AC SPINDLE MOTOR, The Mitsubishi SJ-11AW 4M motor is a reliable and efficient choice for industrial applications, offering precision and power for various operations., Brand: Mitsubishi, Model: SJ-11AW 4M, Stock #: 86692, Condition: Used, Machine Status: For Sale, Output ...more

The Mitsubishi Electric FR-A220-7.5K-11 is a 7.5 kW variable frequency drive from the Freqrol A200 series, designed for three-phase AC motor speed control in industrial applications. The nameplate confirms an AC input rating of 200 to 220V at 50Hz and 200 to 230V at 60Hz, with an output current of 33A. Serial numbers ...more

used- ava-holland merten gmbh rotary vacuum paddle dryer, type htk 200. 316ti (1.4571) on product contact parts. total capacity 8.3 cu. ft (235 liter), working capacity 156.66 cu. ft (156.66 liter). double jacketed. inside operating temperature 266f (130c), design temperature 392f (200c). internal rated for full ...more

The FANUC CNC Spindle AB112M-5.5/10K, model A06B-1232-B412#111, is a brand new OEM spare part engineered for high-speed, high-precision CNC machining applications. This 5.5 kW spindle motor is designed to deliver up to 10,000 RPM, making it ideal for use in high-performance milling, drilling, and turning centers. ...more

Forge Press: 200 Kn ( 200MT), SPM: 50, SPM 70 Pendulum, Slide Stroke: 250mm or 9.94", Descending Speed: 679mm/s, Die Height: 500mm or 26.73", Slide Adjustment: 120mm or 4.72", Slide Dimensions: 1850mm x 650mm, 72.83" x 25.60", Bolster Dimensions: 2150mm x 850mm x 180mm, 84.64 x 33.46 x 7.09", Stopping Time: 200 m/s ...more

Volts Max: 200 Max Amps 60, PREOWNED MITSUBISHI AC SPINDLE MOTOR, The Mitsubishi SJ-11 A motor is a reliable and efficient choice for industrial applications, offering precision and power for various operations., Brand: Mitsubishi, Model: SJ-11 A, Stock #: 86693, Condition: Used, Machine Status: For Sale, Output ...more

The Mitsubishi HA200CS is a permanent magnet AC servo motor from the HA series, designed for use as a feed axis motor in CNC machine tools and industrial automation systems. Manufacturer list the HA200CS at 3.5 kW rated output with a nominal rotation speed of 2,000 RPM. The motor uses a three phase AC power input and ...more

Used 200 liter Sartorius Biostat CultiBag single use bioreactor, model STR 200 DW, stainless steel bag holder with agitator drive, jacketed for 2 bar, control system with hmi touch screen, serial# STR-0553, built 2016.