12 Results
1" x 6" Waterbury-Farrel, 4-High Cold Rolling Mill, 15 HP main mill motor, Vollmer contact gauge, 1,000 lb. payoff reel, 7.5 HP recoiler
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
, MANUFACTURER - WATERBURY FARREL, WORK ROLLS - 1" X 6", BACK-UP ROLLS - X X 6", MAIN MILL MOTOR - 15 HP, POWERED SCREW DOWN - 15 HP, CONTACT GAUGE - VOLLMER MODEL VMF3/2 GAUGE, MILL DRIVES AND CABINET, NON-POWERED 1000 LBS PAYOFF REEL, RECOILER - 7.5 HP.
2"/8" x 10" Fenn, 4-High Cold Rolling Reversing Mill, 10" mill width, 60 HP, mill control panel
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Fenn
, MANUFACTURER - FENN, WORK ROLLS - 2" X 10", BACK-UP ROLLS - 8" X 10", MAIN MOTOR DRIVE - 60 HP, POWERED SCREW DOWN - YES, REVERSING REELS - YES, 7.5" HP EACH, MILL CONTROL PANEL.
11" x 25" x 24" Waterbury-Farrel, 4-High, #64230
TDI Group LLC | Pittsburgh, PA
Category: Cold Roll Mills
Seller: TDI Group LLC
Location: Pittsburgh, PA
Mfr: Waterbury-Farrel
, 11" x 25" x 24" Four High Waterbury Farrel Cold Rolling Mill, Manufacture Waterbury Farrel, Material: Stanless Steel, Carbon Steel, Material Width 6" Min. - 19" Max (152.4mm - 482.6mm), Material Thickness.035" Min. -.200" Max. (.899mm - 5.080mm), Cold Rolled Strip, Coil OD: 47" Max. (1,193.80 mm), Coil ID 20" (508 ...more
11" x 45" x 45" SMS Demag, 6Hi Reversing Cold Rolling Mill, coolant, PLC, 2002, modernization in 2010
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Year: 2002
TYPE:6-HI, BUILT:2002, MODERNIZATION IN 2010, ROLLED MATERIAL:CARBON STEEL SAE1006, S235-S550, C45-C75, IF, STRIP WIDTH MAX.: 1150 MM, THICKNESS:IN 3.5 MM OUT 0.30 - 2.5 MM, SPEED MAX.: 1000 M/MIN, COIL I.D./O.D.508 MM / 2000 MM, ROLL SEPARATION FORCE 800 TON, MAX. TENSION 9000 KG, BACKUP ROLL DIAMETER: 1050 MM - 1150 ...more
21"/53" x 60" Continental, tandem cold rolling mill, 4 Hi 4 Stand, 30"-53" width, 50"-72" OD, 24" ID
D & H Machinery Inc | Toledo, OH
Category: Cold Roll Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Continental
Continental 4 Hi 4 Stand Tandem Cold Mill, 21" and 53" x 60" Face, Material grades available on request, Entry Gauges / Thickness: 0.050" - 0.180" Max. (1.3 - 4.6 mm), Exit Gauges / Thickness: 0.020" - 0.080" Max. (0.5 - 2 mm), Coil Width: 30" - 53" (760 - 1350 mm), Coil I.D.: 24" (610 mm), Coil O.D.: 50" - 72" (1270 ...more
Get email updates for newly added Cold Roll Mills
Cold Roll Mills (also known as cold rolling mills) are machines used to reduce the thickness of metal sheets or strips by passing them through rollers at room temperature. This process improves surface finish, strength, and dimensional accuracy. Commonly used in industries like automotive, construction, and manufacturing, cold roll mills are essential for producing high-quality, precisely finished metal products.
52" x .25" DMS Z-Mill #ZR22BBS52, cold rolling, 18"-52" material width, 1992
TDI Group LLC | Pittsburgh, PA
Category: Cold Roll Mills
Seller: TDI Group LLC
Location: Pittsburgh, PA
Mfr: Dms
Year: 1992
, Manufacture:, DMS, France, Under License of Sendzimir, Model: ZR22BBS52, Year of Mfg. 1992, Design: 20 High Z-Mill/Cluster Type Rolling Mill, Material Data:, High Carbon / Low carbon / Stainless Steel, Material Travel: R-L, Material Width 18" - 52" (1320 mm) Max., Material Gauge:, Entry:.0250" (6.3 mm), Exit:.009" ...more
56" Hitachi, 5 stand 6 Hi continuous tandem cold rolling mill
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hitachi
, MILL ENTRY CONFIGURATION, Entry Speed, design rated for 869 FPM, Bridle top speed increased to 970 FPM, Bridle #4 & Steering Unit, (2) IMS Thickness Gauges (Installed 2021), (1) Traversing profile thickness gauge, serves as backup center thickness, gauge, (1) primary stationary center thickness gauge. Entry ...more
71" Spidem, 1800mm x 0.2mm exit 4-Hi aluminum reversing cold rolling mill
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Spidem
, WIDTH: 750MM - 1800MM, ENTRY THICKNESS: 10MM, EXIT MAX/MIN THICKNESS: 0.2MM, LINE SPEED: 500 MPM MAX, MAX COIL WEIGHT: 11,000 KG, MILL DATA:, WORK ROLL FACE: 1800MM, WORK ROLLS DIAMETER: 410MM, BACK UP ROLLS DIAMETER: 980MM, 2 X 1,100 KW MOTOR DRIVE, UNCOILER DATA:, COIL ID 600MM, COIL OD 1850MM, 310 KW MOTOR DRIVE ...more
Capital Engineering Inc., 1250mm 6-Hi reversing cold rolling mill, 800 meter/min., 2012
Midwest Machinery LLC | Livonia, MI
Category: Cold Roll Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Capital Engineering
Year: 2012
Make: Capital Engineering Inc (China), Year Built: 2012, Type: Reversing Cold Rolling Mill, Speed: 800 meters per minute, Maximum Material Width: 1250mm, Material Thickness: 2.5mm - 3mm, Product Material Thickness: 0.3mm - 0.6mm, Work Rolls (mm): 280 x 1450 x 2641, Intermediate Rolls (mm): 390 x 1390 x 3530, Back Up ...more
Hitachi-Seiki, 6 Hi cold rolling mill, reversing, Automatic Gauge Control, 1990-2022
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hitachi-Seiki
Our stock number: 115587, 6 HI HITACHI COLD ROLLING MILL, REVERSING, YEAR: 1990 -2022, MATERIAL STAINLESS STEEL, CARBON STEEL, ALLOYS, THICKNESS RANGE-.0.05mm~3.0mm, STRIP WIDTH-.500mm~680mm, COIL I.D -. 598mm~610mm, Coil O.D -. 1500mm, Coil WEIGHT. 8.5ton, Line Speed -.800mpm, SEPARATION FORCE.500 TON, TENSION -. ...more
RWF Cold Rolling Mill, Carbon Steel, 250mm x 550mm x 630mm, X-ray, AGC, conventional control, PLC
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Rwf
Material- Carbon Steel, Material Thickness max/min - 6.5mm/0.20mm, Entry Uncoiler, Snubber Roll, Straightener, Coil Weight - 7 ton, Coil outside diameter, max - 1400 mm, Coil inside diameter - 508 mm, Max material width - 630 mm, Material Thickness max/min- 6.0 mm/ 0.40 mm, Roll Face- 680mm, Max Speed- 300 m/min ...more
Waterbury-Farrel #ZR24-14, Cold Rolling Mill, 7"-14" width range, 0.050" max. thickness, 7000 lbs. @ 500 PIW, 1000 FPM, 16" mandrel
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
MATERIAL - STAINLESS STEEL ALLOYS, CARBON STEEL ALLOYS, WIDTH 14" MAX TO 7" MIN, THICKNESS RANGE.05" MAX - TYPICALLY.032 to.0015, MAXIMUM TENSION - 7000 POUNDS 500 PIW, SPEED - MAXIMUM 1000 FPM, LIE DIRECTION - LEFT TO RIGHT, POWER 3 PHASE 480 VAC, PAYOFF 16" NPMONAL 14.5" TO 17.5" FULLY EXPANDED, PAYOFF COIL SIZE 16" ...more
