back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Recoilers

51 Results

500 lb. Coiltek #Ci-500, recoiler, 3.5" roll width

Wenco Machinery Corp | Ringwood, NJ | E. Schouten |
Category: Recoilers
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Coiltek
CAPACITY 500 LBS MAX. WIDTH OF COIL 3.5" THE UPPER REEL IS SETUP FOR PAPER INTERLEAF., Condition Used Stock Number 2509.

1000 lb. Ruesch, dual head recoiler, 12" dia x 20" face drum, manual expansion, disc brake

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Dual Head Recoiler, -N2729D 6042, -1,000 lb. Capacity Each Head, -1st Head - 12" Dia. x 20" face Drum, Manual Expansion, Material Slot (No Gripper), Disc Brake, Electric Clutch, -2nd ...more

2000 lb. Progressive #620-SM-RH, traverse wind recoiler, 10.5" W, 30" OD, 15" ID

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Progressive
Progressive Machine Co. Traverse Wind Recoiler, Model: 620-SM-RH, Serial Number: 17060620, Spooler Machine No.: SO# 37370, Maximum Coil Weight: 2,000 Lb., Spool Size:, O.D.: 30" (762mm) ...more

2000 lb. Progressive #620-SM-RH, traversing take up, #10579

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Progressive
2000 Lb., PROGRESSIVE, No. 620SM-RH,TRAVERSE TAKE UP, Our stock number: 10579, MANUFACTURER: PROGRESSIVE MACHINE CO. INC., PATERSON, NEW JERSEY, MODEL: 620-SM-RH, SERIAL NUMBER: 17060620 ...more

10000 lb. Octagon #10000, recoiler, 27" width, 54" OD, 16" ID, #51678

Yoder Machinery Sales | Holland, OH | Sales |
Category: Recoilers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Octagon
INSERTION SECTION CONSISTS OF., (3) PAIRS OF ADJUSTABLE WIDTH EDGE GUIDE ROLLS., (2) PAIRS OF DRIVEN RUBBER COATED ROLLS, 8" DIA. x 18" WIDE,., EACH PAIR HAS HYDRAULIC HOLD DOWN CYLINDERS ...more

Get email updates for newly added Recoilers

10000 lb. Paxson, 16" x 42" drum, hydraulic push-off, manual clamp & expansion

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Paxson

10000 lb. Paxson, recoiler, 36", 16" diameter x 42" face drum, manual clamp & expansion

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Paxson Recoiler, -Capacity: 10,000# x 36", -16" Diameter x 42" Face Drum, -Manual Clamp and Expansion, -Hydraulic Pushoff, -Overarm Separator, -40 HP AC Motor, 1775 RPM, 230/460 V, Eaton ...more

10000 lb. Stamco Recoiler, double support w/drop-in drums, 32" dia. x 30" face drums, air expansion/collapse

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
-Double Support with Drop-In Drums, -32" Dia. x 30" Face drums, air expansion / collapse, -Hydraulic Drum engagement, -50 HP Reliance DC Drive Motor (Rebuilt July 1997), 300 / 1800 RPM, 240 ...more

15000 lb. Stamco, recoiler with hold-down roll, 30"

Midwest Machinery LLC | Farmington Hills, MI | Sales Department |
Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Make: Loopco, Material Width: 8" - 30", Weight Capacity: 15,000Lb, Coil ID: 20", Coil OD: 72", Powered Hold-Down Roll, Sliding Base, Powered Expansion, Motor: 75HP DC / 650 ...more

20000 lb. ADA, recoiler, 16" diameter x 59.5" face drum, hydraulic expansion, 37" passline, 1966

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ada
Year: 1966
-20,000 lb. Capacity, -16" Dia. x 59.5" Face Drum, -Hydraulic Expansion, -Dual Direction Material Slot (No gripper), -24" Dia. x 32.875" Wide bolt on pads with reversible, manual gripper ...more

20000 lb. Aetna Standard, hydraulic push-off, manual gripper & expansion, #13656

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Aetna
MACHINE# 13656, - Manufacturer: Aetna Standard Co. (U.S.A.), - 20,000# (9072 Kg) Capacity, - 16" (406mm) Dia. x 31" (788mm) Drum Face Width, - Manual Gripper & Expansion, - Bolt on ...more

20000 lb. Braner, recoiler, 16" dia x 52" face drum, hydraulic grip & expand, hydraulic pushoff

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Braner
Braner Recoiler, -20,000# x 48" Capacity, -16" Dia. x 52" Face Drum, -Hydraulic Grip and Expand (Gripper Bar Missing), -Hydraulic Pushoff, -Hydraulic Drive Motor; Sundstrand Sauer Danfoss ...more

20000 lb. Herr recoiler, 42" drum length, 20" drum diameter, powered expansion, manual gripping

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Herr
-Drum Length: 42", -Drum Diameter: 20", -Powered Expansion, -Manual Gripping, -Hydraulic Pushoff, -Traversing Base, -Motor: Baldor 40 HP DC, 575/2300 RPM, 230 Volt, -Gearbox:, Michigan Tool ...more

20000 lb. Herr, 42" mandrel length, 20" mandrel diameter, hydraulic push-off, power expansion, manual gripping

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Herr
MACHINE# 13657, Manufacturer: Herr Voss Co., Mandrel Length: 42" (1066mm), Mandrel Diameter: 20" 508mm), Powered Expansion, Manual Gripping, Hydraulic Push-off, Traversing Base, Motor: ...more

20000 lb. Paxson Machine Co., Recoiler, 20-1/2" mandrel outside dimension, 48" coil width, hydraulic

National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Paxson
ARE SUBJECT TO VERIFICATION BY PURCHASER**.

20000 lb. Paxson #20000x36, hydraulic recoiler, 54" mandrel length, 50 HP DC, 1971, #66542

Yoder Machinery Sales | Holland, OH | Sales |
Category: Recoilers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Paxson
Year: 1971
PAXSON 20,000 LB HYDRAULIC RECOILER, SERIAL NUMBER. 11216-71, YEAR OF MANUFACTURE. 1971, HYDRAULIC HOLD DOWN SEPARATOR. YES, MANDREL LENGTH. 54", MANDREL MINIMUM DIAMETER. 16", SPARE ...more

20000 lb. Paxson, 48", with overarm separator, 60 HP, #6583

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Paxson
20,000 Lb. x 48", PAXSON, RECOILER, W/OVERARM SEPARATOR, 60 HP, HYD. Our stock number: 6583, MANUFACTURER: PAXSON MACHINE CO., CAPACITY: 20,000 LBS. MAX. COIL WEIGHT, TYPE: EXPANDING ...more

20000 lb. Ruesch, recoiler, 36" W, 15" diameter drum, 39" drum face, 1996

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Year: 1996
-20,000# Capacity, -Thickness Range: 0.005" - 0.090", -15" Dia. "Sliptech" Drum (New in 1996), -39" Drum Face, -7" Dia. Main Shaft, -Large amount of Sliptech tooling; fiber cores and steel ...more

20000 lb. Ruesch #N2915, recoiler, 20" dia., 32" face drum, manual grip & expansion

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Recoiler, -Model: N2915, -20" Dia. x 32 Face Drum, -Manual Grip & Expansion, -Hydraulic Slide Base, -Hydraulic Pushoff, -Overarm Separator, -125 HP DC Motor, 650/1500 RPM, 400V ...more

20000 lb. Stamco, recoiler, 16" diameter x 55" face drum, 100 HP DC Motor

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
-16" Dia. x 55" Face Drum, -Hydraulic Expansion, -No Gripper Slot, -No Pushoff, -No Overarm Separator, -100 HP Reliance DC Motor, 850/1700 RPM, 600 V w/Blower, -Reducer w/16:1 Ratio ...more

20000 lb. Stamco recoiler, 60" width, 72" OD, 16" dia drum, 1000 FPM, 150 HP DC, 1999

Galaxie Corporation | Wayne, MI | Sales Dept. |
Category: Recoilers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Stamco
Year: 1999
60" x 20,000# Stamco Recoiler, Speed: 1000 FPM, 16" Diameter Drum (neoprene pads for 20"), 72" Coil OD, Full Hydraulic Drum, Overarm Seperator, Hydraulic Push-Off, 2 Speed Gear Box 13.2: 1 ...more

20000 lb. Wean Manufacturing, 54" mandrel, 48" width, 60" outside dimension, 16"-20" ID range, hydraulic push-off

Machinery International Corp | Woodridge, CT | John Conroy |
Category: Recoilers
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Wean
MACHINE #13645, Manufacturer: Wean Manufacturing Co. (U.S.A.), Materials: Aluminum, CRS, Pre-paint, Thickness Range:.015" - 135" (approx.), Max. Coil Weight: 20,000# (9072 Kg), Max. Coil ...more

20000 lb. Yoder, 48" recoiler, 52" mandrel length, 1/2" travel, hydraulic push-off, #59308

Yoder Machinery Sales | Holland, OH | Sales |
Category: Recoilers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
CAPACITY. 20,000, MANDREL LENGTH. 52", COIL WITH MAX. 48", ARBOR BEARING DIA. 6", I.D. COLLAPSED. 19-1/2", TRAVEL. 1/2" (APPROX), HYDRAULIC PUSHOFF. YES.

20000 lb. Yoder, recoiler, 36" mandrel length, pushoff

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Yoder
-Max. Coil Weight: 20,000 lbs., -Mandrel Length: 36", -Pushoff, -Less Drive Motor, -In Storage: Toledo, OH.

20000 lb. Yoder, 42" wide, 20" ID

Met-Pro Machinery Inc | Oakland, MI | Jeff Lengel |
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Oakland, MI
Mfr: Yoder

30000 lb. Loopco, recoiler, DC motor with gear box, 60"

Midwest Machinery LLC | Farmington Hills, MI | Sales Department |
Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Loopco
Make: Stamco, Material Width: 12" - 60", Coil Weight: 30,000Lbs, Coil ID: 16" - 20", Coil OD: 72", DC Motor & Gear Box, Good for Rewinding Line.

30000 lb. Matteson, recoiler, 20" dia x 44.5" face drum, dual driection gripper, 100 HP

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Matteson
-30,000 lb. Capacity, -20" Dia. x 44.5" Face Drum, -Pumpkin Tooth Drum, -Dual Direction Gripper, -Powered Drum Expansion and Gripper, -Approx. 26.5" from floor to center of drum, -Hydraulic ...more

30000 lb. Stamco recoiler, 12"-60" width, 16" & 20" ID, 72" OD

Midwest Machinery LLC | Farmington Hills, MI | Sales Department |
Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Stamco
Make: StamcoMaterial Width: 12" - 60"Weight: 30,000LbCoil ID: 16" & 20"Coil OD: 72"Hydraulic GripperPowered Over-Arm SeparatorHydraulic Push - OffTwo Speed Gear Box150HP DC Motor ...more

40000 lb. Cincinnati #RR72-40-3-C-250, Recoiler, 72" width, 20" dia drum, hydraulic expansion, hydraulic pushoff

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cincinnati
-Capacity: 40,000 lb. x 72", -Model# RR 72-40-3-C-250, -20" Dia. Drum, -Hydraulic Expansion, -Hydraulic Pushoff, -Overarm Separator, -250 HP DC motor, -Line Direction: Right to Left ...more

40000 lb. Comeq Stamco recoiler, 70" drum face, 20" x 24" drum diameter, hydraulic push off, 200-400 FPM, 67"gripper slot, 49"to top of mandrel, 24:1 main gearbox ratio, hydraulic strip clamp

Galaxie Corporation | Wayne, MI | Sales Dept. |
Category: Recoilers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Comeq
Max Coil Weight: 40,000#, Drum Dia.: 20" x 24", 66" Roll Face, 24:1 Main Gear Box Ratio, Strip Clamp: Hydraulic, Push Off: Hydraulic, Overarm Separator: Pneumatic Operation ...more

40000 lb. Loopco Recoiler, 54" wide, 16" diameter Drum, 20" & 22" Pads, 200 HP, hydraulic clamp & expansion, 1974

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
Year: 1974
-40,000# Capacity, -54" Wide, -16" Dia. x 58" Face Drum, -20" Dia. Bolt On Pad, -22" Dia. x 57" Face Spare Drum, -Hydraulic Clamp and Expansion, -12" Dia. Main Shaft, -Hydraulic Pushoff ...more

40000 lb. Paxson, recoiler, 20" diameter x 64" face drum, 10.5" diameter main shaft, hydraulic pushoff, powered clamp & expansion

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
-Capacity: 40,000 lb. x 60", -20" Dia. x 64" Face Drum, -Powered Clamp & Expansion, -Gripper opens to 0.312", -10.5" Dia. Main Shaft, -Hydraulic Pushoff, -Overarm Separator, -Passline: ...more

40000 lb. Paxson, recoiler, 20" diameter x 57" face drum, hydraulic clamp & expansion

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
-40,000# x 57" Capacity, -20" Diameter x 57" Face Drum, -Hydraulic Clamp and Expansion, -12" Diameter Main Shaft, -Hydraulic Pushoff, -60 HP Fincor DC Motor, 1750/2100 RPM, 500 Volts with ...more

40000 lb. Warner & Swasey Swasey #RC-4072, recoiler, 72" W, 20" dia. x 78" face drum

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Warner & Swasey
Warner Swasey Recoiler, Model RC - 4072, - 40,000 Lb x 72" Capacity, - 20" Dia. x 78" Face Drum, - Hydraulic Grip & Expand, - Hydraulic Pushoff, - Overarm Separator, - 100 HP DC Motor ...more

40000 lb. Yoder, 64" drum, 20" ID, 125 HP AC motor, ABB drive, 17.42:1 ratio

Met-Pro Machinery Inc | Oakland, MI | Jeff Lengel |
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Oakland, MI
Mfr: Yoder

40000 lb. Comeq Stamco Recoiler, 70" drum face, 67" Gripper Slot, 49" to Top of Mandrel, Hydraulic

National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ

50000 lb. Aetna, standard recoiler, 60" W, 20" diameter drum, hydraulic clamp & expansion

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Aetna
-50,000# x 60" Wide Capacity, -20" Dia. Drum, -Hydraulic Clamp and Expansion, -Dual Direction Gripper, -Hydraulic Pushoff, -No Overarm Separator, -Philadephia Gearbox, Rated at 294 HP at ...more

50000 lb. Bronx recoiler, 60" x .125", 20" diameter drum, .018"- .125" thickness range, 140 HP, 1650 RPM Motor DC, 1986

Galaxie Corporation | Wayne, MI | Sales Dept. |
Category: Recoilers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Bronx
Year: 1986
Year 1986, Machine# 12356, Serial# 221286, Thickness Range:.018"-.125", 20" Diameter Drum, 70" Drum Face, Hydraulic Push-Off, Outboard Bearing Support, Hydraulic Drum with ...more

50000 lb. Paxson, recoiler with outboard bearing support, 72" wide

Pro Mach | Valparaiso, IN | Joseph Piegat |
Category: Recoilers
Seller: Pro Mach
Location: Valparaiso, IN
Mfr: Paxson
* 50,000 Lbs. max coil weight capacity w/outboard bearing support, * 72" Max. coil O.D., * 75 HP D.C. motor and drive, * Hydraulic Push-off plate, * Air cylinder actuated overarm strip ...more

60000 lb. ADS coil inspection / recoil line, .012"/.110" x 60", #64228

TDI Group LLC | Pittsburgh, PA | D. DiBenedetto |
Category: Recoilers
Seller: TDI Group LLC
Location: Pittsburgh, PA
Mfr: Ads
Thickness Capacity:.012-.110" Width Capacity: 24-60" Coil Size Capacity: 24" (ID) 38-72" (OD) Coil Weight Capacity: 30 Ton.

60000 lb. Kawasaki Mitsubishi, double mandrel carousel recoiling, 54", R to L

National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kawasaki
THIS DOUBLE MANDREL CAROUSEL RECOILING SYSTEM ENABLES A PROCESS LINE TO RUN, CONTINUOUSLY AND EFFICIENTLY ALLOWING FOR A FINISHED COIL TO BE WOUND ON THE, FIRST RECOIL MANDREL AND COIL ...more

60000 lb. Pro-Eco recoiler, 60", sliding base, over-arm, paper rewinder

Midwest Machinery LLC | Farmington Hills, MI | Sales Department |
Category: Recoilers
Seller: Midwest Machinery LLC
Location: Farmington Hills, MI
Mfr: Pro-Eco
Material Width: 12" - 60", Coil Weight: 60,000Lb, Coil ID: 20", Coil OD: 72", Powered Gripper, Hydraulic Push-Off, Powered Over-Arm, Sliding Base, 100HP DC Motor, Control ...more

60000 lb. Wean, 82" recoiler, 23" dia drum, 80" coil outside dimension

Galaxie Corporation | Wayne, MI | Sales Dept. |
Category: Recoilers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Wean
Wean Order No. 34570, 83"Drum Face, 23" Dia Drum, 80" Coil OD, Hydraulic Expansion & Collapse, Hydraulic Gripper, 3 Segment Drum, Gear Box Ratio: 26.61 : 1, Sliding Base ...more

70000 lb. Red Bud #RC-39-80, recoiler & coil car, 72" W, 20" diameter x 79.5" face drum, hydraulic grip & expand

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Red Bud
70,000# x 72" Red Bud Recoiler and Coil Car, -Recoiler:, Model: RC 39-80, 20" Dia. x 79.5" Face Drum, Pads For 24" I.D., Hydraulic Grip & Expand, 250 Hp DC Motor, With Parker 400 HP ...more

80000 lb. Voest Alpine, recoiler, 76" W, 24" diameter drum, hydraulic gripper & expansion, 1998

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Voest
Year: 1998
-Coil Weight: 80,000 Lbs., -Drum Face Width: 76", -Drum Dia.: 24", -Dual Direction Gripper for Over and Under Winding, -Hydraulic Gripper and Expansion, -Hydraulic Sliding Base, -Hydraulic ...more

Braner recoiler, 36" wide

National Machinery Exchange | Newark, NJ | Brian / Andreia |
Category: Recoilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Braner

Fata Hunter Machine Concepts, hydraulic recoiler, 20-1/2" mandrel width, 7.5 HP, #55211

Yoder Machinery Sales | Holland, OH | Sales |
Category: Recoilers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Fata Hunter
# 20214 045 601, RECOILER DRUM(MANDREL). 20" X 17" DIAMETER, FLOOR TO CENTERLINE. 36", ALUMINUM CLEANING RECOILER, HYDRAULIC PUSH OFF, HYDRAULIC OVERARM, OVERALL DIMENSION. 112" LONG X 80" ...more

Ruesch Recoiler, left to right, 30" face, 16" ID, 72" OD, 7.59:1, manual expansion, 40 HP, 500V.

Met-Pro Machinery Inc | Oakland, MI | Jeff Lengel |
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Oakland, MI
Mfr: Ruesch

Ruesch, recoiler drum, (3 available)

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Recoiler Drums, (3) Drums available, Were previously used on a Ruesch Slitting Line, -Drum #1: 6" Dia. x 22.5" Face, Solid Drum, 2.5" Dia. Spindle Hole w/0.750" x 0.250" keyway, -Drum #2: ...more

Stamco Recoiler Drum, 72" Wide x 16" diameter, 1980' s

D & H Machinery Inc | Toledo, OH | Sales |
Category: Recoilers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
Stamco Recoiler Drum, -72" Face Width x 16" Dia., -Designed for Powered Clamp and Expansion, -Dual Direction Gripper, for over and under wind, -Designed for use with Outboard Support Arm ...more

Stamco, recoiler, 15" diameter x 54.5" face drum, bolt-on urethane pads for 19" diameter, hydraulic expansion

Met-Pro Machinery Inc | Oakland, MI | Jeff Lengel |
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Oakland, MI
Mfr: Stamco
, -Recoiler: Stamco, 15" Dia. x 54.5" Face Drum, Bolt-on Urethane Pads for 19" Dia., Hydraulic Expansion, No Gripper Slot, No Pushoff, No Overarm Separator, 100 HP Reliance DC Motor ...more