Buy or Sell Your Circular Cold Saw Machine

Metl Saw, Asset # 17689.

SERIAL. 383-79123, MODEL. 2012-2H, YEAR NEW. 1979, THROAT, BAND TO COLUMN. 20", MAXIMUM WORK HEIGHT. 12", BAND WIDTH CAPACITY. 1-1/16" TO 1", SAW BAND LENGTH. 154", BAND SPEED RANGE. 5 TO 5200 FPM, VARIABLE, TABLE SIZE. 26-1/2" X 33-1/2", TABLE STROKE. 12", TABLE FEED, HYDRAULIC. 0 TO 6 FPM, TABLE FEEDING FORCE. 0 TO ...more

SERIAL. 501548L, MODEL. CS-350EU, YEAR NEW. 2007, DIAMETER OF BLADE. 14", BLADE SPEEDS. 24 TO 120 RPM, CAPACITY @ 90 DEGREES ROUNDS SOLID. 4", CAPACITY @ 45 DEGREES ROUNDS SOLID. 3", CAPACITY @ 90 DEGREES ROUND/ TUBE. 4.7", CAPACITY @ 45 DEGREES ROUNDS/TUBE. 4", CAPACITY @ 90 DEGREES SQUARE/ SOLID. 4" X 4", CAPACITY @ ...more

4.5CYD FUSION GP BUCKET W/BOCE, 72" FUSION PALLET FORKS, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD ...more

Notes. - FOLEY WORK READY -, s -20 F COLD WEATHER PACKAGE 375 HAF, 2" BALL HITCH AFTERCOOLED AND FILTERED. LCD GRAPHIC DISPLAY. ONTROLLER WITH GAUGE & LCD RATED 375 CFM @ 100-150PSI, C4.4 SULLAIR MOBILE AIR COMPRESSOR T4F DIESEL ENGINE, CURBSIDE VIN - US0124060047.

STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- Working table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" ...more

Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; Blade: -- ...more

1997 Super Radiator Coils / C.E. Rogers Stainless Steel Plate / Fin Heat Exchanger. 304L Stainless Steel Tubes and Fins. Super Radiator Coils Steam Coil. S/N: M61294-1-001. (8) in. dia. x 24 in. L 304L Stainless Steel Tubes. Heat Transfer Surface Area: 2.1sq. ft. C.E. Rogers Cold Air Duct and filter chamber. (160) in. ...more

415 07A BACKHOE LOADER, AIR CONDITIONER, T4F, BELT, SEAT, 2" SUSPENSION, CAB, STANDARD, COLD WEATHER PACKAGE, 120V, COUNTERWEIGHT, 1015 LBS, CUTTING EDGE, TWO PIECE, DISPLAY, STANDARD, ENGINE, 55KW, C3.6 DITA, T4F, FENDERS, FRONT 4WD, GUARD, STABILIZER, HYDRAULICS GP, 5FCN/7BNK, PT, INSTRUCTIONS, ANSI, LANE 3 ORDER ...more

Used 2013 FICEP 1001 DDB Beam/Drill Line in good condition, perfect for efficient industrial applications. Optimize your production with this reliable equipment from a trusted manufacturer. Contact for., Brand: Ficep, Model: 1001 DDB, Drill :, No. or spindles rotating: 1, Beam depth min. - max.: 3-1/8" - 40", Flange ...more

HYDREX HPX510-1 Hot Press, Single daylight opening. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.s (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time, emergency pedal, quad temperature ...more

BAKER PAQ II Band Re-Saw. -- 2-Head Re-Saw, 8" x 12" cap., (2) 20 HP motors. -- : BAKER Octaguide System, moveable sawheads, stationary conveyor belt, rough top belting and infeed hold down wheel. -- (2) Main drive 20 HP motors. -- Options available at extra charge: Powered hold-down, BAKER Quik-Sharp band blade ...more

, Bison 8" 3 Jaw Adjustable Chuck available now. This used lathe chuck s an 8" overall diameter, 3 jaws, and a 2-1/2" center hole ID. Ideal for tooling and accessory needs. Secure a reliable BISON chuck today., Spec Sheet:, Bison 8" - 3 Jaw Adjustable Chuck, USED, Brand: Bison, 3 Jaws, Adjustable Chuck, Overall ...more

STARTRITE COLD SAW, MODEL: CF 350 MP, SERIAL NUMBER: 3422, Maximum Blade Diameter: 14", Maximum Vise Opening: 6", Arbor Bore: 1.25", 32mm, Spindle Speeds: 26 & 52 RPM, Miter Stops: 0, 45, 60 Degrees Left, 0, 30, 45 Degrees Right,.9/1.5 KW Motor 230/60/3, Air Vise, Coolant System, Infeed Support, Blade Guard ...more

CAM-WOOD CS-650SCC Double End Matcher For Herringbone and Chevron FlooringNC Controlled Trough Feed Type End Matcher for Chevron and Herringbone flooring: -- Working Width 1-1/2"; to 6"; -- Working Thickness 1/2"; to 1"; -- Working Length 8"; to 50"; -- Feed Speed 70 FPM with inverter -- Cycle time can be 4 to 8 ...more

Meadows sawmill, New parts from MFG: Saw Arbor, Live belt conveyor, misc parts, Computer setworks, 225 HP Detroit Diesel.

One (1) used Vacuum Sealable Patterson Ball Mill Reactor National Board Number 1758 Shell: Rated for 125 PSI or FV at 650 degrees F Jacket: Rated for 150 PSI at 650 degrees F Serial number: 770437 21.5" diameter x 20" straight wall plus dish ends Circular Door: 8" diameter Stainless steel chamber and ...more

, 126" (3,200 mm) Overall cutting length, 126" (3,200 mm) max. pusher stroke for crosscutting,3.7", (95 mm)Maximum saw blade projection), 20 HP (15 kW) Main & 3 HP (2.2 kW) scoring motor., Saw Carriage:, Variable saw carriage travel speed from 1 - 524 FPM (1 - 160 MPM). "DigiSet" scoring blade adjustment from the ...more

*352 08 EXCAVATOR, *BEACON SOCKET, *CAB MOUNT, ROPS, *COMMON ARRANGEMENT, *COUNTERWEIGHT STD, 21,605LBS, *COVER, REAR HEADER, *DRINK HOLDER, *ELECTRICAL AR, *ELECTRONICS AR, *ELEK GP-A4063, *ENCLOSURE AR, *FAN, REVERSE, *FILM GP, *FILM, EMC, *FINAL DRIVE, UC, STD FG, *FINE SWING, *GUARD, SWIVEL (FG), *HYDRAULIC AR ...more

18" OVERALL DRUM WIDTH, 68" OVERALL WIDTH, CATERPILLAR PART NUMBER 246-7315, CATERPILLAR PC205 COLD PLANER, For XPS machines run in Standard Flow with case drain., REQUIRES: High Flow Hydraulics or Standard Flow with case drain connection and min flow of 80 l/min (21 gpm)., SOLD AS IS.

Make: Bystronic, Model: Bylaser II 3015, Year: 2002, Machine Location: Iowa, Year: 2002, Approx. Shipping Weight: 32,500 Lbs., Table Size: 5′ x 10′, Laser Rating: 4,000 Watts, Cutting Velocity: 1900 In/Min, Positioning Speed (Per Axis): Maximum 4727 In/Min, Positioning Speed (Simultaneous): Maximum 6654 ...more

CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL, OPEN REAR, ENGINE AR, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYDRAULICS, 2V, CPLR READY, SL, HYDRAULICS, STANDARD, HL, JUMPER LINES, NONE, KIT,SERIALIZED TECHNICAL MEDIA, LANE 2 ORDER, LIGHTS, AUX, HALOGEN, LIGHTS, ROADING, HALOGEN ...more

OMGA T 53-370 Precision Compound Miter Chop Saw (Manual)This precision saw is a multi purpose machine suitable for use in carpentry, for cutting moulding, picture frames, furniture components and any application requiring precision cutting. & s: -- Manual Cutoff Miter Saw, free-standing on its own base (optional ...more

Dependable model 200sa shell core machine s/n 916 with gas panel and hydraulic unit.

Make: JSW, Model: J310ELII, Year: 2000, Machine Location: Kansas, Tonnage: 310 Ton, Shot Size: 24.7 Oz, Tie Bar Spacing: 24.8″ x 24.8″ (630 x 630 mm), Platen Size: 37.4″ x 37.4″ (950 x 950 mm), Clamping Stroke: 22.4″ (570 mm), Daylight (Min/Max): 9.8″ / 43.3″, Mold Height ...more

Mereen-Johnson Model 424-DC Straight Line Multiple Rip Saw Capacity: Arbor space 24" thickness to 3-1/2" using 14" diameter tooling 30" Minimum length glue joint accuracy 6" Throat Arbor Drive: 75HP, 3600RPM, TEFC Feed Drive: 3HP, TEFC Heavy duty direct coupled feed drive assembly with variable frequency drive, Feed ...more

& GFI JUNCTION BOX/CORD), 2-INCH BALL HITCH, 240V TWIST LOCK RECEPTACLE, BLOCK HEATER, BATTERY BLANKET, COLD START AID PACKAGE (OIL PAN, KUBOTA D-1005 ENGINE, 350 W, LEDS, 6KW GEN SET, VIN# 5F13D1014R1007877.

SERIAL. 070353001, MODEL. C360SA, YEAR NEW. 2007, MITERING CAPACITY LEFT & RIGHT. 45 & 60 DEGRESS, CAPACITY ROUND. 4-1/2", CAPACITY SQUARE. 4", CAPACITY RECTANGLES. 4" X 7", CAPACITY ROUNDS @ 45 DEGREES LEFT. 4", CAPACITY ROUNDS @ 45 DEGREES RIGHT. 4-1/2", CAPACITY SQUARE AT 45 DEGREES. 4"LEFT OR RIGHT ...more

SERIAL. 11T140, MODEL. 402I9, YEAR NEW. 2011, NUMBER OF CUTTING HEADS. 2, CUTTING DIAMETER. 5.90551", CUTTING LENGTH. 137.7953", DIAMETER OF BLADE. 15.748, BLADE SPEEDS. 3190 RPM, MITER CUTS. 0 TO 45 DEGREES, BLADE FEED. PNEUMATIC, CLAMPING. PNEUMATIC, SAW BLADES HEADS TRAVEL. BACK & FOURTH, MOTORS HORSEPOWER. ...more

OMGA Radial 1250-7 Radial Arm Saw -- : 7 HP Saw motor, 43.897" crosscut cap. at 90; 6-7/8" thickness cap. at 90, 4-7/8" at 45; 59" rip cap.; 20" dia. blade with 1" bore; 1-3/4" max. dado cap.; 3,400 RPM Arbor Speed. -- s: Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) ...more

RAIMANN - KM-310,.Gang (Multi-Blade) Rip Saw12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.s: -- "Quickfix Hydro-Quick" Arbor: Multiple Saw blades are mounted on the arbor, they slide up-and-down the arbor into position and lock into place by tightening the end of the arbor; no ...more

W.F. Wells 17″ x 20″ Hydraulic “Twin-Post” Band Saw, F-16-3, Inventory # 5830, Model: F-16-3, Made in USA, Capacity:, Round:, @ 90°: 17″, Rectangular:, @ 90°: 17″ x 20″, Weight Capacity: 5,000 lbs., Blade Speed Range: 60 – 500 FPM, Blade Size: 200″ x 1 ...more

TMP SERIAL #22563. NEW IN 2007. THE "HOT SIDE" HAS TWO 13.5"X 13.5" ELECTRIC PLATENS (5/8" DIA CARTRIDGE HEATERS; 230 VOLT; 700 WATT; 2 ZONES PER PLATEN; 6 HEATERS PER PLATEN). APPROX 5.75" DAYLIGHT AND 4.5" STROKE. THE "COLD SIDE" HAS CORED PLATES FOR WATER COOLING. APPROX 6" DAYLIGHT AND 7" STROKE. BOTH CLAMP ...more

Make: Dake, Model: Cobra 350AX, Year: 1985, Machine Location: California, Maximum Blade Diameter: 14″, Spindle Speeds: 1700/3400 rpm, Maximum Vise Opening: 7″, Maximum Feeder Vise Opening: 6-1/4″, Indexing Length of Feeder (one pass): 23″, Maximum of Multiple Indexes: 1 to 9, Approx. ...more

SERIAL. B1225HFA1103, MODEL. 315HFA/LT350-14LT, DIAMETER OF BLADE. 12.4", CUTTING SPEEDS. 11 TO 117 RPM, MINIMUM CUT LENGTH. 1/8", CAPACITY TUBING @ 90. 3-1/2", CAPACITY SQUARES @ 90. 3-1/8" X 3-1/8", CAPACITY SOLID ROUNDS @ 90. 1-3/4", CAPACITY SOLID SQUARES @ 90. 1-1/2" X 1-1/2", LENGTH TOLERANCE. -+ 0.006", SINGLE ...more

*CHASSIS AR, *ELECTRONICS AR, *HYDRAULIC AR, *INSTALLATION AR, *POWER TRAIN AR, AUX ECM, CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL, OPEN REAR, Engine, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYDRAULIC OIL, STANDARD, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, SL ...more

Blade Projection: 70mm, Cutting Lengths Available: 3,300mm, 3,800mm, and 4,300mm, Saw Carriage Speed: 6–60m/min, Approx. Pusher Feed Speed (for cross cutting): 60m/min, Main Blade Motor: 7.5kW, Scoring Blade Motor: 1.3–1.5kW for scoring unit, Main Blade Rotation Speed: 4,650RPM; scorer blade 5,850RPM ...more

Bradbury CNC Hydraulic Folding Machine, Capacity: 21 ft. x 14 gauge (0.075"), -Variable speed Hydraulic Power Unit provides quick performance, for productivity, smooth operation to reduce shock on components, and energy savings when the folder is idling between operations., -Two position back gauge increases machine ...more

SFVG1200 twin vertical Band Saw 1200mm wheel blade size. Machine used for the log break down process in continuous flow sawmill layouts. Capacity to process logs up to 500mm in diameter and 3.000mm long. This machine is fitted with main motor, motor drive panel, servo motor thickness selection, adjustable saw guides ...more

;- FOLEY WORK READY - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 730-04A ARTICULATED TRUCK, AID, COLD WEATHER STARTING, AUTOLUBE ARRANGEMENT, BODY, STANDARD, CHASSIS, STANDARD, EXHAUST, STANDARD, LUBRICATION, AUTOMATIC, MIRROR, STANDARD, NO MACHINE SECURITY SYSTEM, NO PAYLOAD, NO ...more

0P0720, 340 08 EXCAVATOR ARRANGEMENT, BATTERY, COLD WEATHER, BEACON SOCKET, BEARING, SWING HD, BLOCK HEATER, 120V, BOOM TUBE W/EOU, BOOM, REACH 21'4" HD, EOU, CAB MOUNT, ROPS, CAB, DELUXE, CAMERA, 360 VISIBILITY, CAT CERTIFIED USED, COMMON ARR, CONSISTS OF:, CONTROL, QC, COOLANT, COLD WEATHER, COUNTERWEIGHT ...more

950M WHEEL LOADER, AIR INLET PRECLEANER, TRASH, ANTIFREEZE, -34C (-29F), AUTO DIFF, STEERING WHEEL, AXLES, AUTO/AUTO, ED, SG, BKT, 121" 8.00 CYD, CAB AR, STD W/ GRD, CAB ROOF, NON-METALLIC, CLEAN EMISSIONS MODULE TR4FINAL, COOLING CORES, 6 FPI, COUNTERWEIGHT, 1460KG, COVER, HVAC, CTRL, PCS, CUTTING EDGE, Engine, FAN ...more

Hasko Model SR-24 High Speed Roll Feed Gang Rip Saw Material Capacity: 24" Wide 1/2" - 2-1/2" Thick Blade Size: 14" Saw Motor: 75HP Hydraulic Driven Feed System - Variable Speed Pneumatic-Pressure Hold-Down/Feed Rollers - Infeed & Outfeed Hydraulic Unit: 30HP Anti-Kickback Fingers 7" Top Dust Port, 8" Bottom Dust ...more

6005 BW 6/12/25, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AXLES, AUTO/AUTO, ED, AOC, BKTA GP AB 132" 7.00YD3 PO, CAB TRIM, DELUXE (LHD), COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CPM PAYLOAD SOFTWARE, Engine, FAN, STANDARD, FENDERS, BASIC +, FILTRATION, STANDARD, FUEL ANTIFREEZE, -25C (-13F) ...more

SAFETY SPEED MFG 7400 Vertical Panel Saw: Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 2 HP single-phase Induction Saw Motor. -- 8" Blade cap. with 2-1/8" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- 120" ...more

Northtech Model NT-SLR-18SC PRECISION STRAIGHT LINE RIP SAW FEED SYSTEM Saw motor: 20HP, 3PH 230V/460V Feed: 3HP variable feed range from 50 - 190 fpm PRODUCT DIMENSIONS Min. thickness: 3/16" Max depth of cut: 5" with 18" blade Max. width of stock: (Blade to column arms) 26-1/4" S Chain and Race NT "True Track" ...more