Buy or Sell Your Circular Cold Saw Machine
AI-ranked results for circular cold saw machine - closest matches first
1.29" x 11.81" Hyodong #HBP-633L, 6-die parts former, 82 PPM, 132 KW
National Machinery Exchange | Newark, NJ
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hyodong
Model: HBP-633L
NUMBER OF DIES - 6, CUTOFF DIAMETER - 33MM, LENGTH UNDER HEAD - 50-250MM, CUTOFF LENGTH 20-300MM, CUTOFF KNIFE LENGTH - 105MM DIA. X 34MM, CUTOFF QUILL LENGTH - 100MM DIA. X 150MM, PUNCH DIA LENGHT - 110MM DIA X 300MM, DIE DIA LENGTH - 150MM DIA X 350MM, CENTER DISTANCE - 168MM, P.K.O STROKE - 50 (62) MM, K.O. STROKE ...more
5/16" x 4.5" National, DSSD Cold Header, 125 PPM, 3.25" K.O. length, 7.5 HP
Machinery Exchange International | Posen, IL
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: National
5/16″ Maximum Cutoff Diameter, 4-1/2″ Maximum Cutoff Length, 3-1/4″ Maximum Kickout Length, 125 PPM, Electrics: 7-1/2 HP, AC Motor & Controls, Dual plane wire straightener, Comes with: Pallet of spare tooling.
3/16" x 1-1/2" National, single stroke solid die cold header, 300 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
One Used 3/16" National Single Stroke Solid Die Cold Header, Serial No 16197, 3/16" Cutoff Diameter, 1" Shank Length, 1 1/2" Cutoff Length, 300 Pieces per Minute, AC Motor and Controls, Weight 4000 Lbs., Located FOB PA Whse.
.236" x 1.77" Nakashimada #H20, DSSD cold header, 200,230 PPM, excellent condition
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: H20
Maximum Cutoff Diameter 6mm Shank Length 25mm Maximum Cutoff Length 45mm Pieces per Minute 200,230 Electrics AC Motor and Controls Weight 7500 Lbs., Excellent Condition as Taken from Service.
1/4" x 2.75" Nakashimada #H20A, DSSD cold header, 180-200 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: H20A
Cutoff Diameter 6mm (100,000 PSI) Shank Length 50mm Cutoff Length 70mm Pieces Per Minute 180,200 Electrics AC Motor and Controls Weight 7500 Lbs.
1/2" x 4-1/2" National #1/2, double stroke open die cold header, 30 HP, #64135
Yoder Machinery Sales | Holland, OH
Category: Cold Headers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: National
Model: 1/2
SERIAL. 22930, MODEL. 1/2, MAXIMUM LENGTH. 4-1/2", SET UP FOR LAG SCREWS. YES, CONTROL AND PUSH BUTTONS YES, MOTOR. 30 HP, VOLTAGE. 220/440/3/60 HZ.
1/8" x 3/4" Hartford #2-450, high speed cold header, cutoff length 1.460,450 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Hartford
Model: 2-450
Brand, HARTFORD, Model, 2-450, Type, Cold Header, Solid Die, 1 Die 2 Blow, Stock #, 12869, Condition, Used, Maximum Cutoff Diameter 1/8" Maximum Shank Length 3/4" Cutoff Length 1.460 Pieces per Minute 450 Electrics 7.5 HP AC Motor and Controls Weight 3800 Lbs. Wire Straightener Incl.
Caterpillar 316EL, Crawler Excavator, 11220 hours, S/N: DZW01938, 2015
Fabick Cat | Fenton, MO
Category: Excavators
Seller: Fabick Cat
Location: Eau Claire, WI
Mfr: Caterpillar
Model: 316EL
Year: 2015
**ATTACHMENTS PICTURED ARE, 316EL HYDRAULIC EXCAVATOR, ACCUMULATOR WITH CRN, AIR CLEANER, STANDARD, Air Conditioner, ALARM, TRAVEL, BATTERY, COLD WEATHER, BE INCLUDED IN THE PRICING**, BELT, SEAT, 3 IN. RETRACTABLE, BUCKET-GD, 48 IN. 1.19 CYD, BUMPER, SIDE STEEL, CAB STD PKG, CAB-ROPS, 70/30 W/VANDAL-G BOSS, CAMERA ...more
7-1/4" Evolution # EVOSAW180HD, cut steel without heat, burrs or coolant, new
Bud's Machine Tools | Murray, UT
Category: Circular Saws
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Evolution
Model: EVOSAW180HD
Overview, Type:Metal Saws (Other)Manufacturer:EVOLUTIONModel:EVOSAW180HDCondition:New - In-StockStock #:1069Status:For Sale, Evolution Circular Saws cut steel without heat, burrs or coolant!EVOSAW180HD | 7-1/4" TCT Industrial Circular SawEVOSAW230 | 9" TCT Industrial Circular SawEVOSAW380 | 15" Steel ...more
Shalco #U180, gas fired shell core machine with gun drilled heater plates, gas system and controls
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Shalco
Model: U180
Shalco model u180 gas fired shell core machine with gun drilled heater plates, gas system and controls.
3.5" Scotchman #315HTRFA, Cold Saw, 1997
Revelation Machinery | Chicago, IL
Category: Carbide, Friction and Cold Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Scotchman
Model: 315HTRFA
Year: 1997
Make: Scotchman, Model: 315HTRFA, Year: 1997, Machine Location: Oregon, Source: https://www.normanmachinetool.com/product/scotchman-automatic-non-ferrous-cold-saw-cpo-315-hfanf/, Capacity:, Round Tube: 3 1/2″, Square Tube: 3 1/8″, Round Solid: 1 3/4″, Square Solid: 1 1/2″ x 1 1/2″, Length ...more
Weinig, Optisaw System w/Luxscan Combiscan & (3) Opticut 450 Quantum, 4'-12' L x 1.5"-6.5" width x 1"-2" thick Incoming Size capacity, 2017
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Year: 2017
Weinig/Dimter Optisaw System with Luxscan Combiscan and 3 Opticut 450 Quantum This Line was Designed by Weinig to process up to 67 boards per minute The Example Presents is 8’ Long Material 3” x 1” with 6 Cuts Per Board This Line will Cut Multiple Widths with a Separate Cutting Bill for Each Width ...more
JUST ADDED!
Cat 966M, Wheel Loader, 5420 hours, S/N: EJA03859, 2022
Hawthorne Cat | San Diego, CA
Category: Wheel Loaders
Seller: Hawthorne Cat
Location: Lakeside, CA
Mfr: Caterpillar
Model: 966M
Year: 2022
966M WHEEL LOADER, 966M WHEEL LOADER AM-N FTO2A, ANTIFREEZE, -34C (-29F), AUTODIG SOFTWARE, AXLES, AUTO DIFF F/R, AOC, BKTA GP ST 127" 5.50YD3 FUS, CAB TRIM, DELUXE (LHD), CAP GP, RAIN, CLEAN EMISSIONS MODULE, COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CPM PAYLOAD SOFTWARE, FAN, STANDARD, FENDERS, ROADING ...more
1.22" x 9.45" Sacma #SP660AL, 5-die cold former, 7.87" die kick, 150 HP, 80 PPM
National Machinery Exchange | Newark, NJ
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sacma
Model: SP660AL
SACMA MODEL# SP660 AL, 5 DIE COLD FORMER, YEAR 2008, HEADING TONS. 500, BLANK LENGTH. 240mm, DIE KICK. 200mm ON THE LENGTH, CUTOFF DIA. 31mm, UNIVERSAL TRANSFER, 80 PPM, 150 hp MOTOR.
3/16" x 1-1/2" Waterbury-Farrel #Hi-Pro, cold header, 225 PPM, 5 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: HI-PRO
Cutoff Diameter 3/16" Shank Length 1" Cutoff Length 1 1/2" Pieces Per Minute 225 Electrics 5 HP AC Motor and Controls Weight 3750 Lbs.
70 Ton, 3.8 oz., Nissei #NS60-9A, Injection Molding Machine, 2006, NS60-9A
Revelation Machinery | Chicago, IL
Category: Screw Type Injection Molding Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nissei
Model: NS60-9A
Year: 2006
Make: Nissei, Model: NS60-9A, Year: 2006, Machine Location: Illinois, Capacity: 70 Ton, Shot Size: 3.8 oz, Tie Bar Spacing: 13.58″ x 13.58″, Platen Size: 19.6″ x 19.6″, Max Daylight: 23.62″, Min /Max Mold Height: 6.7″ / 23.6″, Clamp Stroke: 16.93″, Control: NC9000G Tact ...more
LHI #Super-RoboChop, pneumatic up-cut saw, 4-1/2" x 16" up to 6" x 9" cutting envelope, 15 HP, 16' infeed table, laser light, pneumatic stop, double palm buttons, manual chop, 2026, new
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: SUPER-ROBOCHOP
Year: 2026
LHI Super RoboChop Pneumatic Upcut Saw w/16' Infeed. Automatic custom Upcut Saw, cutting envelope of 4-1/2" x 16" up to 6" x 9"; cuts (2,000) 4" x 6" x 3-1/2" blocks/Hr: -- Up-cutting saw operation left-to-right or right-to-left (specify when ordering); saw structure tilted to assist in keeping boards on fence. -- ...more
Featured
Ficep Beam and Saw Line, 2014
U.S. Asset Exchange Llc | Grand Rapids, MI
Category: CNC Beam/Drill Lines
Seller: U.S. Asset Exchange Llc
Location: Grand Rapids, MI
Mfr: Ficep
Year: 2014
YEAR: 2014, Ficep 1001 DDB Drill:, No. of Spindles, Rotating: 1, Beam Depth, Min.-Max.: 3 1/8" - 40", Flange Height, Min.-Max.: 3/8" - 17 3/4", Maximum Drill Diameter: 1 9/16", Maximum Drill Thickness: 4", Spindle Motor: 22 HP, Spindle Speed: 180 - 2500 RPM, Ficep K100 Band Saw:, Max. Sawing Capacity at 90 Degree: 40" ...more
JUST ADDED!
9" x 9" FMB #Jupiter, automatic horizontal bandsaw, 125" x 1" x .035" blade, 52-394 FPM, 19.5" shuttle stroke, 2005
Greenway & Associates Ltd | Orange City, IA
Category: Horizontal Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Fmb
Model: JUPITER
Year: 2005
, NC control (99 jobs), Full auto cycle, Powered blade brush, Flood coolant, Roller table extension, Blade breakage switch, Carbide guides, Manufacturer FMB 9" x 9" Horizontal NC Automatic Bandsaw Model Jupiter Year 2005 Condition Used Serial Number G00057 Stock Number 10532 Blade size 125" x 1" ...more
CTD #D45X, Double Miter Saw, 3725 RPM,
RT Machine | Hughesville, PA
Category: Miter Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ctd
Model: D45X
Blade Capacity: 12" Cutting Capacity: 4" H x 2.375 W Two 1.5 HP Saw Duty Motors, 208-230/460v, 3ph Two Pneumatic Hold-Downs Infeed & Outfeed Tables w/ Flip-Stops Serial #: 3473.
JUST ADDED!
Cat 420-07, Backhoe Loader, 867 hours, S/N: H8T00416, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Backhoe Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Fife, WA
Mfr: Caterpillar
Model: 420-07
Year: 2020
AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BEACON, MAGNETIC MOUNT, BELT, SEAT, 3" SUSPENSION, BUCKET-GP, 1.4 YD3, PO, BUCKET-HD, 18", 4.2 FT3, CAB, DLX, COLD WEATHER PACKAGE, 120V, CTWT, 1015 LBS, CUTTING EDGE, TWO PIECE, DISPLAY, STD, ENG SN J3625330 MSO C3ZWK, ENG, 74.5KW, C3.6, T4F, GUARD, STABILIZER, HYD, MP ...more
25" x 40" W.F. Wells #B-25-1, Full Hydraulic Twin-Post Band Saw, 15000 lbs. capacity, 270" x 1.25" Blade, 26" Bandwheel, 60-500 FPM, 7.5 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: B-25-1
W.F. Wells 25″ x 40″ Full Hydraulic “Twin-Post” Band Saw, B-25-1, Inventory # 5831, Model: B-25-1, Made in USA, Capacity:, Round:, @ 90°: 25 1/2″, @ 45°: 24″, Rectangle:, @ 90°: 25″ x 40″, @ 45°: 25″ x 24″, Weight Capacity: 15,000 lbs., Blade ...more
Cat 416F2ST, Backhoe Loader, 1541 hours, S/N: HWB02085, 2019
Ohio Cat Heavy Machinery | Broadview Heights, OH
Category: Backhoe Loaders
Seller: Ohio Cat Heavy Machinery
Location: Columbus, OH
Mfr: Caterpillar
Model: 416F2ST
Year: 2019
AIR CONDITIONER, T4, BEACON, MAGNETIC MOUNT, STROBE, BELT, SEAT, 2" SUSPENSION, CAB, STANDARD, COLD WEATHER PACKAGE, 120V HRC, COUNTERWEIGHT, 1015 LBS, ENGINE, 70KW, C4.4 ACERT, T4F, HYDRAULICS GP, 6FCN/8BNK, PT, I09, INSTRUCTIONS, ANSI, LANE 3 ORDER, LINES BOOM, HBCV, LINES, COMB AUX, PILOT, E-STK, MIRRORS, EXTERNAL ...more
4" KMT #C360SA, cold cut saw, 4-1/2" round, 4 HP, coolant, manual clamping, 2007, #73459
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kmt
Model: C360A
Year: 2007
SERIAL. 070353001, MODEL. C360SA, YEAR NEW. 2007, MITERING CAPACITY LEFT & RIGHT. 45 & 60 DEGRESS, CAPACITY ROUND. 4-1/2", CAPACITY SQUARE. 4", CAPACITY RECTANGLES. 4" X 7", CAPACITY ROUNDS @ 45 DEGREES LEFT. 4", CAPACITY ROUNDS @ 45 DEGREES RIGHT. 4-1/2", CAPACITY SQUARE AT 45 DEGREES. 4"LEFT OR RIGHT ...more
1/8" x 1-1/4" National #25, DSSD high speed cold header, bushing cutoff, 450 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: 25
Year: 1976
Cutoff Diameter 1/8" Cutoff Length 1-1/4" Shank Length 3/4" Pieces Per Minute 450 Weight 3,500 Lbs., Bushing Cutoff, Split Punch Holders, ***Machine is currently set up to run as a single die single blow header***.
Komo #VR-508, CNC Router, 60" x 120" Table, 25 HP Sullair vacuum pump, dust collector
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Komo
Model: VR-508
Komo VR508 CNC Router, 60" x 120" Table, 25 HP Sullair Vacuum Pump, Dust Collector (10 or 15 HP - need to confirm), (2) Two main router heads with Quick Change, (2) Vertical Drill Units, (1) 8 HP 10" Saw, Fanuc Control.
14.5" Dake #370S, Semi-Automatic Cold Saw, 8.75" Vise Opening, 25/50 RPM, 35" Work Height, 3.5/4.5 HP, 220/440 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Carbide, Friction and Cold Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Dake
Model: 370S
Dake 14 1/2″ “Euromatic” Semi-Automatic Cold Saw, 370S, Inventory # 8462, Model: 370S, P/N: 976200-2, Semi-automatic ferrous saw that’s user friendly for set up and operation. Featuring two removable surface wear plates, heads that rotate 45° and 90° left/right, three gib guides, a ...more
Urschel #Sprint-2, Stainless Steel dicer, that uniformly dices, strip cuts and slices a wide variety of products at high production capacities
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Urschel
Model: SPRINT-2
Urschel, Model Sprint 2, Stainless steel dicer, that uniformly dices, strip cuts and slices a wide variety of products at high production capacities with product per minute and hour – depending on materials, application and machine configuration. Capable of handling product sizes up to 6½" in any ...more
13" x 25" FMB #Pegasus-XL, Semi-auto horizontal Bandsaw, 1-1/4" x 14' 8" x 0.042" blade, 394 FPM, 4 HP, 2020
Revelation Machinery | Chicago, IL
Category: Horizontal Band Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Fmb
Model: PEGASUS-XL
Year: 2020
Make: FMB, Model: Pegasus XL, Year: 2020, Machine Location: California, Cutting Capacity, Square 0 Degree: 13” x 13”, Square 45 Degree: 13” x 13”, Square 60 Degree: 6-1/4” x 6-1/4”, Round 0 Degree: 13”, Round 45 Degree: 13”, Round 60 Degree: 9-1/2”, Rectangle A O ...more
FAM #ILC, all Stainless Steel construction, slices, strip cuts and dices up to 2205 pounds of product per hour
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fam
Model: ILC
FAM Model ILC, all stainless steel construction, slices, strip cuts and dices up to 2,205 pounds of product per hour – depending on materials and application. 18" x 17" stainless steel product feed hopper, 11" OD product port to processing chamber, and has combination of 3 cutting tools for ...more
Hartford #3-350, cold header, serial #5300-156-7
National Machinery Exchange | Newark, NJ
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hartford
Model: 3-350
, DIAMETER CUT-OFF: 3/16" TO 0.236"(6MM), MAX SHANK LENGTH: 1-1/4", MAX CUT-OFF LENGTH: 2", PRODUCTION RATE: 350 PPM, MOTOR: 15 HP, SOUND ENCLOSURE.
Cat 950QC, Wheel Loader, 793 hours, S/N: TN200730, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Wheel Loaders
Seller: Ring Power Cat - Heavy Machinery
Location: 415 Community College Pky, FL
Mfr: Caterpillar
Model: 950QC
Year: 2024
4.5CYD FUSION GP BUCKET W/BOCE, 72" FUSION PALLET FORKS, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD ...more
Caterpillar 730, Articulated Truck, 2135 hours, S/N: 3T303023, 2023
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Articulated Dump Trucks
Seller: Wagner Equipmet - Heavy Machinery
Location: El Paso, TX
Mfr: Caterpillar
Model: 730
Year: 2023
607 GD 9/15/23, AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), AUTOLUBE ARRANGEMENT, BEACON, LED, CAT CERTIFIED USED, CHASSIS, STANDARD, Engine, EXHAUST, HEATED BODY, FILM GROUP, ANSI, HEATER, ENGINE COOLANT, 120V, LINER, DUMP BODY, LUBRICATION, AUTOMATIC, MIRROR, ELECTRIC HEATED ...more
Cat 420-07HT, Backhoe Loader, 2036 hours, S/N: H8T01299, 2021
Fabick Cat | Fenton, MO
Category: Backhoe Loaders
Seller: Fabick Cat
Location: Madison, WI
Mfr: Caterpillar
Model: 420-07HT
Year: 2021
****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, *420 07A BACKHOE LOADER CFG2, *AIR CONDITIONER, T4F, *AUTO-UP STABILIZERS, *CAB, DELUXE, *COLD WEATHER PACKAGE, 120V, *COUNTERWEIGHT, 1015 LBS, *DISPLAY, STANDARD, *ENGINE, 74.5KW, C3.6 DITA, T4F, *HYDRAULICS, MP ...more
Holytek #CFS-100, Semi-Optimizing Cut-Off Saw, 1.18" width x 3/8" Work thickness, 18" Saw Blade diameter, 30 mm Spindle diameter, 70 MPM, 10 HP, 3200 RPM, 600 V, 2020
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: CFS-100
Year: 2020
HOLYTEK - CFS-100: Semi-Optimizing Cutoff Saws -- An economical approach to optimized cutting. -- High production! User-friendly operation! -- Provides (3 - 5) times higher production rate than conventional Cutoff Saws. -- Saves over.5% of wood materials due to its high precision cut. -- Machine designed with: HOLYTEK ...more
880 Ton, 116 oz., Milacron #MM-880-116, horizontal plastic injection molder, 9.8" ejection stroke, 55.1" x 42.5" tie bar spacing, 88.6" daylight, Xtreme ST, 2002
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Milacron
Model: MM-880-116
Year: 2002
, 2002 880 Ton Milacron Maxima MM-880-116:, Shot size: 116 Oz, Tie bar spacing: 55.1" x 42.5" WP, Platen Size: 70.9" x 58.3", Max. Open daylight: 88.6", Min Mold Height 11.8", Max Mold Height 45.3", Clamp Stroke 76.8", Ejection Stroke 9.8", Control: Xtreme ST, Notes: Good overall condition., Located in Ohio., Imperial ...more
Weeke #BHC-350-4/10, CNC Machining Center, 147" X, 49" Y, 3.1" max thickness, 3.5 HP, 1500-7000 RPM, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weeke
Model: BHC-350-4/10
Year: 2004
WEEKE BHC 350 4/10 CNC MACHINING CENTER: : -- Working cap.:"X" axis: 3,750 mm (147.6"), "Y" axis: 1,250 mm (49.2"), 80 mm (3.1") max. material thickness. -- Positioning Speed: "X" axis is 196 FPM (60 MPM), "Y" axis 164 FPM (50 MPM) & "Z" axis 66 FPM (20 MPM). The heads travels on THK linear motion guides on all ...more
Dake #370PP, vertical column automatic cold saw, 1997, S46218
Perfection Global | Elk Grove Village, IL
Category: Carbide, Friction and Cold Saws
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Dake
Model: 370PP
Year: 1997
Motor: 3.5 hpMax Blade Diameter: 14-1/2"Max Vise Opening: 8-1/4"Max Feed Vise Opening: 6-1/2"Max Angle: 45° Left / 90° RightSpeed: 25/50 RPMSolid Round 90° Capacity: 4"Solid Round 45° Capacity: 3-5/8"Tube 90° Capacity: 5-1/16"Tube 45° Capacity: 5"Square 90° Capacity: 4"Square 45° ...more
JUST ADDED!
Caterpillar 730, Articulated Truck, 3956 hours, S/N: 3T302363, 2022
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Articulated Dump Trucks
Seller: N C Machinery Co. - Heavy Machinery
Location: Seattle, WA
Mfr: Caterpillar
Model: 730
Year: 2022
108D CLEAN EMISSIONS MODULE, AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), CHASSIS, STANDARD, EXHAUST, STANDARD, FILLER, FAST FUEL, FILM GROUP, ANSI, GROUP, ETHER, HEATER, ENGINE COOLANT, 120V, LINER, DUMP BODY, MIRROR, STANDARD, NO PAYLOAD, NO ROOF LIGHTS, NO SOUND SUPPRESSION ...more
#GEW-979-2, Stainless Steel Washer, 480 V, 3 Ph., 2.5 kW, 200-600 KPS
Equipment Recovery Corp | Willoughby, OH
Category: Washer Parts - Miscellaneous
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Model: GEW-979-2
Brand: -, Condition: USED, "AS-IS", Model: GEW 979-2, Type: -, Serial: 0Q080119, Power Rating: 2.5 KW MAX, 480 V, 3 PH, 3 A, 60 HZ COLD WATER: 200-600 KPA, STEAM: 200-600 KPA, Weight: APPROX. 1500 LBS, Category: LAB EQUIPMENT, Shipping Dimensions: 45" X 93" X 80", ERC #: MO-4576, Job #: 103, Additional Notes: KEY IS ...more
Cat 950QC, Wheel Loader, 1010 hours, S/N: TN200735, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Wheel Loaders
Seller: Ring Power Cat - Heavy Machinery
Location: St. Augustine, FL
Mfr: Caterpillar
Model: 950QC
Year: 2024
4.5CYD FUSION GP BUCKET W/BOCE, 72" FUSION PALLET FORKS, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD ...more
Holytek #S-450, Programmable Automatic Cut-Off Saw, 11.9" L x 1.18" width x 3/8" H min Work Size, 1" Spindle diameter, 18" Saw Blade diameter, 10 HP, 600 V, 2012
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: S-450
Year: 2012
HOLYTEH - S-450: Programmable Automatic Cutoff Saws -- Machine cuts at a fixed length for various cutting requirements. -- Ideal for finger jointing (for defect) materials and mass material preparation. -- Advanced Servo Motor System; fast processing speed; high stability and cutting accuracy of ± 0.5 mm. -- ...more
Cat 420F2IT, Backhoe Loader, 2878 hours, S/N: HWD03770, 2019
Boyd Cat Company | Parkersburg, WV
Category: Backhoe Loaders
Seller: Boyd Cat Company
Location: Elizabethtown, KY
Mfr: Caterpillar
Model: 420F2IT
Year: 2019
420F2 BHL IT, TIER 4, HRC, AIR CONDITIONER, T4, BELT, SEAT, 2" SUSPENSION, CAB, DELUXE, COLD WEATHER PACKAGE, 120V HRC, COUNTERWEIGHT, 1015 LBS, ENGINE, 74.5KW,C4.4 ACERT, T4F, FAN, HYDRAULICS, MP, 5FCN/7BNK, IT, INSTRUCTIONS, ANSI, LANE 2 ORDER, Online Owner's Manual, PACK, DOMESTIC TRUCK, POWERTRAIN, 4WD ...more
Cat 966M, Wheel Loader, 10081 hours, S/N: KJP00926, 2015
Fabick Cat | Fenton, MO
Category: Wheel Loaders
Seller: Fabick Cat
Location: Schofield, WI
Mfr: Caterpillar
Model: 966M
Year: 2015
**ATTACHMENTS PICTURED ARE, 966M WHEEL LOADER, ANTIFREEZE, -34C (-29F), AUTOLUBE,CATERPILLAR STD-LIFT, AXLES, AUTO DIFF F/R, ED, BE INCLUDED IN THE PRICING**, BUCKET-GP, 5.25 CYD, CAB AR, STANDARD, CAB ROOF CAP, CERT EMISSIONS, EPA TIER 4, COOLING, 6 FINS PER INCH, COUNTERWEIGHT, AGGREGATE, COVER, HVAC, PLASTIC ...more
JUST ADDED!
80 KW Cummins #RS80, Quiet Connect Series Liquid-Cooled Generator, natural gas/propane, 70-400 amp circuit breaker, 1800 RPM, multi-voltage, 1PH/3PH
Atlantic Power & Equipment | Atlantic City, NJ
Category: Natural Gas Or Dual Fuel Generators
Seller: Atlantic Power & Equipment
Location: Atlantic City, NJ
Mfr: Cummins
Model: RS80
Cummins RS 80 Quiet Connect Series Liquid Cooled Residential Standby Generator, Robust product design and testing -, The generator is designed to operate under extreme environmental conditions including cold weather starts at as low as -40 F., Series Model Available:, 1 Phase 120/240v, 3 Phase 120/240v, 3 Phase ...more
Dependable #400, shell core machine with gas system & controls, air operated rollover, feed with blow tank
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Dependable
Model: 400
14" Dake #COBRA-350AX, cold saw, 1700/3400 RPM, 7" vice opening, 6-1/4" feeder vise opening, 23" feeder length, 8 blades, 1985
Revelation Machinery | Chicago, IL
Category: Carbide, Friction and Cold Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Dake
Model: COBRA-350AX
Year: 1985
Make: Dake, Model: Cobra 350AX, Year: 1985, Machine Location: California, Maximum Blade Diameter: 14″, Spindle Speeds: 1700/3400 rpm, Maximum Vise Opening: 7″, Maximum Feeder Vise Opening: 6-1/4″, Indexing Length of Feeder (one pass): 23″, Maximum of Multiple Indexes: 1 to 9, Approx. ...more
Heidelberg/Tensor #Mercury/T400BE, Tower Press System, (2) 4-High & (2) 2-High Towers, 22.75" cutoff x 36" width, 1995
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Heidelberg / Tensor
Model: MERCURY/T400BE
Year: 1995
1995 Heidelberg Mercury / Tensor newspaper press system with 22.75" cutoff, including Martin ECP splicers, two Mercury 4-high towers, two Mercury 2-high towers, a 2004 Tensor T400BE 4-high tower, JF35 folder, and central water circulation. Complete tower system for newspaper and coldset applications., 1995 Heidelberg ...more
B & P #SF6CA, shell core machine with A & B Micro Logix 1000 controls
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: B & P
Model: SF-6CA
B AND P MODEL SF6CA SHELL CORE MACHINE With A&B Micro Logix 1000 controls.
45 Ton, Battenfeld #45/200/02/08/6/20, injection molder, #178-1
Federal Equipment Company | Cleveland, OH
Category: Screw Type Injection Molding Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Battenfeld
Model: 45/200/02/08/6/20
Used Battenfeld injection molder, model 45/200/02/08/6/20, 45 ton clamp force, 16" x 16" platen, 10" x 10" mold area with mold, Unilog 3000 controls, 460 volt, serial# 1900, built 1987.
Extrema #XR-12N, straight line rip saw, 1" diameter arbor, 12" blade capacity, 15 HP, 4500 RPM, 8 spring loaded holddown rollers
Ex-Factory | Charlotte, NC
Category: Straight Line Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: XR-12N
EXTREMA - XR-12N: Straight Line Rip Saw -- 15 HP - 4,500 RPM Direct drive overhead mounted arbor motor. -- 1" Dia. arbor; 8" - 12" max. blade capacity. -- 3-5/16" Max. depth of cut. -- 8" Min. part length. -- 14-3/4" Distance between saw & column; 44" wide x 63" long table. -- 1 HP Variable feed drive; feed speed ...more
35.5" x 13" DoAll #3613-0, vertical bandsaw, 1" x 175" blade, 50-5200 FPM, blade welder, S/N 278-75628
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Doall
Model: 3613-0
Throat Band to Column 35.5 inches Maximum Work Height 13 inches Band Width Capacity 1/16" - 1" Saw Band Length 175 inches Variable Band Speed 50-300 / 850-5200 FPM Table Tilt 45 R / 10 L Table Dimensions 26 x 26 Table Height 43 inches Wheels 3 - 16.125" Upper Wheel Adjustment 3 inches Approx. Shipping Dimensions 40 L ...more
Caterpillar 12M2, Motor Grader, 12052 hours, S/N: R9S00245, 2014
Ziegler Cat - Used | Minneapolis, MN
Category: Motor and Road Graders
Seller: Ziegler Cat - Used
Location: Postville, IA
Mfr: Caterpillar
Model: 12M2
Year: 2014
New tires installed 11-14-25CabHeatA/C14ft. MB2 foot right extensionDiff lock14.00R24 tiresBase +4, 12M2 MOTOR GRADER, 14.00R24 tires, Arrangement, Snow, ARTICULATION GUARD, BASE + 4 (WM,WT,FL,RIP), BUNDLED, NI BLADE EXTENSION, CAB, PLUS (STANDARD GLASS), CAMERA,REAR VISION, COMFORT PACKAGE, ENGINE S/N MYE08204 ...more
3-1/2" Scotchman #CPO-315HFA/LT350-14LT, hitch feed automaitc cold saw, 12.4" bade diameter, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Scotchman
Model: CPO-315HFA/LT350-14LT
SERIAL. B1225HFA1103, MODEL. 315HFA/LT350-14LT, DIAMETER OF BLADE. 12.4", CUTTING SPEEDS. 11 TO 117 RPM, MINIMUM CUT LENGTH. 1/8", CAPACITY TUBING @ 90. 3-1/2", CAPACITY SQUARES @ 90. 3-1/8" X 3-1/8", CAPACITY SOLID ROUNDS @ 90. 1-3/4", CAPACITY SOLID SQUARES @ 90. 1-1/2" X 1-1/2", LENGTH TOLERANCE. -+ 0.006", SINGLE ...more
National Formax #FXH1M, high speed DSSD cold header, 470 PPM, IAC, PKO 1st & 2nd, 2004
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: FXH1M
Year: 2004
Maximum Cutoff Diameter 5mm Shank Length 40mm Cutoff Length 60mm Pieces per Minute 470 Electrics AC Motor and Controls Weight 14,000, IAC, Bushing Cutoff, PKO 1ST AND 2ND, Relieving Knockout, Supported Pin Knockout, Motorized Feed and Kickout Adjustments, Quick Die Change, Mechanical Wiper, ACVD, LINEAR FEED, Brankamp ...more
Caterpillar 14015, Motor Grader, 6156 hours, S/N: EB200162, 2020
Fabick Cat | Fenton, MO
Category: Motor and Road Graders
Seller: Fabick Cat
Location: Fenton, MO
Mfr: Caterpillar
Model: 14015
Year: 2020
**ATTACHMENTS PICTURED ARE, ANTIFREEZE WINDSHIELD WASHER, ARTICULATION GUARD, BASE + 2 (FL,RIP), BE INCLUDED IN THE PRICING**, BLADE, 14' X 24" X 7/8", CAB, PLUS (INTERIOR), CAB, PLUS (STANDARD GLASS), CAMERA, REAR VISION, CIRCLE SAVER, COLD WEATHER PLUS PACKAGE, CONTROL,AUTO ARTICULATION-DEMO, CONVERTER GP ...more
15.7" X 12.2" Behringer #HBP-210/43-GA, CNC programmable bandsaw, 65-459 FPM, 1997
G-2000 | Toledo, OH
Category: Horizontal Band Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Behringer
Model: HBP-210/43-GA
Year: 1997
SERIAL.: 497234, MODEL.: HBP310/403G, CAPACITY ROUND 90 DEG.: 12.2", CAPACITY RECTANGLE 90 DEG.: 15.7" X 12.2", CAPACITY ROUND 45 DEG RIGHT.: 10.6", CAPACITY RECTANGLE 45DEG LEFT.: 13.7" X 12.2", CAPACITY RECTANGLE 45DEG RIGHT.: 10.6" X 12.2", MITER RANGE MAX LEFT.: 30 DEG, MITER RANGLE MAX RIGHT.: 45 DEG, CUTTING ...more
Cat 938M QC, Wheel Loader, 9480 hours, S/N: J3R06234, 2018
Wheeler Machinery | Salt Lake City, UT
Category: Wheel Loaders
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Caterpillar
Model: 938M QC
Year: 2018
CAB, DELUXE, CTWT, STD,3064LBS, 5PCS, DIFFERENTIAL, OPEN REAR, ENGINE AR, ENVIRONMENT, MEDIUM DEBRIS, FENDERS, STANDARD, HYD,2V,COUPLER READY,STD LIFT, KIT,SERIALIZED TECHNICAL MEDIA, LANE 3 ORDER, LIGHTS, STD HALOGEN, Online Owner's Manual, PACK, DOMESTIC TRUCK, PREP PACK, UNITED STATES, PRICED 06/04/25 DA ...more
18"/36 x 22"/25" Hyd-Mech #V-18/20/25, VCS-20/36, Automatic Vertical Tilt Frame Band Saw, new, #14445-13149 (10 available)
Blumberg Machinery Co | Bannockburn, IL
Category: Vertical Band Saws
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Hyd-Mech
Model: V-18/20/25
NEW - 18"H x 22"W HYD-MECH V-18APC-60 AUTOMATIC VERTICAL TILT FRAME BAND SAW, STANDARD S, Automatic programmable mitering with “go to” angle functionality from 60° left to 60° right Three full stroking hydraulic vises (Feed, Main, and Outboard) and Third Squaring Vise Automatic multi-indexing up to ...more
LHI RFPR-72/12-HEAVY-DUTY, multi-blade panel saw, 50 Hp arbor, 2" max material thickness, 12" blade diameter, 72" cut width, 3-15/16" arbor, 2026, new
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Year: 2026
LHI RFPR 72/12 "HEAVY DUTY" MULTI-BLADE PANEL SAW -- (1) 50 HP main arbor motor for 1/8" min. - 2" max. material thickness; 12" Dia max. blade capacity with 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" precision ...more
Elumatec #SBZ-628S, Profile Machining Center, 4-Axis, 7600 mm Bar length, 250-4600 mm Finished Part length, 200 x 160 mm Profile Cross-Section, 24000 RPM, 2021
Revelation Machinery | Chicago, IL
Category: Window Profile Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Elumatec
Model: SBZ 628S
Year: 2021
Make: Elumatec, Model: SBZ 628s, Year: 2021, Machine Location: Upon Request, Max. Bar Length: 7600mm, Working Direction: Right to Left or Left to Right (switchable), Max. Profile Cross-Section: 200 x 160 / 160 x 200 mm, Min. Profile Cross-Section (depending upon gripper position): 30 x 10 mm, Finished Part Length: ...more
.393" x 3.62" Hilgeland #CF2, 2 die 3 blow cold header, 1986
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Hilgeland
Model: CF2
Year: 1986
Wire Diameter Range 6-10mm Shank Length under Head 70mm Cutoff Length 92mm Die Length 90mm Die 1 and 2 Diameters 100mm Punc 1, 2 and 3 Diameters 30mm, This machine can optionally be switched to mattress 1 or 2 with a double stroke., Approximately 5 minutes is required for the change over..
5/16" x 5" Nakashimada #H25A, DSSD long stroke cold header, bushing cutoff, 140 PPM, PKO, 1980
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: H25A
Year: 1980
One Used 5/16" Nakashimada Model H25A DSSD Long Stroke Cold Header, Serial No 80012, Built 1980, 5/16" Maximum Cutoff Diameter, 5" Maximum Cutoff Length, 4" Maximum Shank Length, 140 Pieces per Minute, Bushing Cutoff, PKO and 6 Roll Wire Straightener, Weight 15,000 Lbs., Located FOB Bridgeport, CT Warehouse.
Cat 930M, Wheel Loader, 7017 hours, S/N: KTG04769, 2019
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Yakima, WA
Mfr: Caterpillar
Model: 930M
Year: 2019
ANTIFREEZE, -50C (-58F), CAB, DELUXE, CAMERA, REAR VIEW, COUNTERWEIGHT, HEAVY, DIFFERENTIAL, OPEN REAR, ENG SN D8T48132 MSO 8NWBS, ENGINE AR, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYD,3V,COUPLER READY,STD LIFT, JUMPER LINES, 3RD FUNCTION, KIT,SERIALIZED TECHNICAL MEDIA, LANE 2 ORDER ...more
1/2" x 3" National #56S-1, 2-die 3 blow cold header, 150 PPM, IAC, PKO, RKO
National Machinery Exchange | Newark, NJ
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: 56S-1
NATIONAL 56 S-1 2 DIE 3 BLOW COLD HEADER, 1990, SN N41386, Cutoff Diameter 1/2" MILD, Die Kickout 2 1/2", Cutoff Length 3", Pieces per Minute 150, Weight 27,000 KG, O.A. Dimensions 14'7" x 5'5"x 7'4"H, Bushing Cutoff, IAC, PKO, RKO.
3/4" -4.5" Accu Cut, flying cut-off, double cut die set, AC Servo motor, die accelerator
Galaxie Corporation | Wayne, MI
Category: Tube and Pipe Cut Off Machines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Accu Cut
Accu Cut Flying Cut-Off, Tube Diameter:.750" - 4.5", Serial No. 2000E, Double Cut Die Set, AC Servo Motor, Die Accelerator, Self Contained Hydraulic Power Cut, 96" Bed Length, Amcol 6000B Saw Lubricant.
16" x 18" W.F. Wells #F-16-1A-CNC, CNC Automatic Twin-Post Band Saw, 5000 lbs. capacity, 180" x 1.25" Blade, 20" Bandwheel, 60-425 FPM, 7.5 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: F-16-1A-CNC
W.F. Wells 16″ x 18″ CNC Automatic “Twin-Post” Band Saw, F-16-1A CNC, Inventory # 5835, Model: F-16-1A CNC, Made in USA, Capacity:, Round:, @ 90°: 16″, Rectangular:, @ 90°: 16″ x 18″, Weight Capacity: 5,000 lbs., Blade Speed: 60 – 425 FPM, Blade Size: 180″ ...more
5 oz., Newbury #V5-75BRS, vertical injection molder, 10" stroke, 24" daylight, 15" x12.25" tie bar spacing, 10" x 62" shuttle table, 1990
TNT Industrial | Orange, CA
Category: Screw Type Injection Molding Machine
Seller: TNT Industrial
Location: Orange, CA
Mfr: Newbury
Model: V5-75BRS
Year: 1990
Platen Size: 21" x 18". Shuttle Table Size: 10" x 62". Vertical Injection Mold. Mold Size: 12.125" x 20". Shot Size: 5 oz. Manufactured 1990..
1/4" x 3.74" Nakashimada #H20E, DSSD cold header, 180-200 PPM, PKO, vari-speed, 1975
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: H20E
Year: 1975
One Used 1/4" Nakashimada Model H20E DSSD Cold Header, New 1975, S/N-750471, 6 mm Cutoff Diameter, 75 mm Shank Length, 95 mm Cutoff Length, 180 - 200 PPM, PKO, Variable Speed, Electrics: AC Motor & Controls, Weight: 7,500#, Bridgeport, Ct Whse.
SCM Gabbiani #P75, Beam Saw, 20-197 FPM, Dust Collector, parts, 2019
Revelation Machinery | Chicago, IL
Category: Panel Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Gabbiani
Model: P75
Year: 2019
Make: SCM, Model: Gabbiani P75, Year: 2019, Machine Location: Upon Request, Blade Projection: 70mm, Cutting Lengths Available: 3,300mm, 3,800mm, and 4,300mm, Saw Carriage Speed: 6–60m/min, Approx. Pusher Feed Speed (for cross cutting): 60m/min, Main Blade Motor: 7.5kW, Scoring Blade Motor: 1.3–1.5kW for ...more
55 Ton, 2.97 oz., Cincinnati #VST-33, Injection Molding Machine, 12.8" H x 12.2" W
Revelation Machinery | Chicago, IL
Category: Screw Type Injection Molding Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: VST-33
Year: 1996
Make: Cincinnati Milacron, Model: VST 33 - 1.08 OZ, Year: 1996, Machine Location: Colorado, 55 Ton, 2.97oz, Cincinnati Injection Moulding Machine:, – Maximum mold: 12.8″ height x 12.2″ width, – Supply volts: 460V, – Control volts: 24-VDC, – Short circuit interrupting capacity 14000 ...more
JUST ADDED!
Holz-Her #Evolution, CNC vertical machining center, 126" X, 36" Y, 2" Z, HSK F63, 6 ATC, 2021
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: EVOLUTION
Year: 2021
HOLZ-HER - EVOLUTION 7405: CNC Machining Center (Vertical) -- Flexible "Vertical" Machining Center can reach movement speeds of: 223 FPM (68 MPM) in "X" & "Y" axis; 49 FPM (15 MPM) in "Z" axis with total safety. -- Working CapacityMaximum part size for "X" axis: 126" (3,200 mm); "Y" axis: 36.2" (920 mm); max. part ...more
3/8" x 5-1/2" Waterbury, long stroke DSSD cold header, 20 HP, 115 PPM, timed PKO
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury
Maximum Cutoff Diameter 3/8" Shank Length 4" Maximum Cutoff Length 5 1/2" Pieces per Minute 115 Electrics 20 HP 220/440 Volts AC Motor and Controls Weight 26,000 Lbs., Timed PKO.
1/2" x 8.26" Toko #TKL-350, DSSD long stroke cold header, 35 PPM, 1982
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Toko
Model: TKL-350
Year: 1982
Maximum Cutoff Diameter 13mm Maximum Cutoff Length 210mm KO Stroke 180mm Pieces per Minute 35 Electrics AC Motor and Controls Weight 28,000 Lbs.
3/16" x 1" Nakashimada #PF-420, 2 die 3 blow cold header, 200 PPM, 1979
FH Machinery Inc | Ivyland, PA
Category: Cold Headers
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Nakashimada
Model: PF-420
Year: 1979
Maximum Cutoff Diameter.158" (4.0mm) Maximum Cutoff Length1" (25mm) Maximum Production200 PPM Die Kickout (1st)50mm Die Kickout (2nd)20mm Approx. Weight4,500 lbs.
.236" x 3.54" Nakashimada #TH2-6A, 2-die, 2-blow, cold header, 20 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: TH2-6A
Year: 1996
Maximum Cutoff Diameter 6mm Maximum Cutoff Length 90mm Shank Length 75mm Minimum Shank Length 10mm Pieces per Minute 20 Electrics AC Motor and Controls Weight 10,000 Lbs.
1/4" x 2-3/8" Carlo Salvi #INT/CL, long stroke DSSD cold header, 280 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Carlo Salvi
Model: INT/CL
Cutoff Diameter 1/4" Shank Length 2 3/8" Pieces Per Minute 280 Electrics AC Motor and Controls Weight 7000 Lbs.
5/16" x 3" National #56, 2 die 3 blow cold header, bushing cutoff, PKO, 150 PPM, 1972
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: 56
Year: 1972
Cutoff Diameter Alloy Steel 5/16" Shank Length 2 1/2" Cutoff Length 3" Pieces per Minute 150 Electrics AC Motor and Controls Weight 25,000 Lbs., Bushing Cutoff, PKO, Brankamp Prokos PK500, transfer fixture, *** Completely Re Built 2003***, ****Excellent Condition as Taken from Service ****.
310 Ton, 26.6 oz., Cincinnati Milacron #MTS310, injection molder, 2.36" screw, 37" x37" platen, 36" x36" tie bar spacing, 53.5"DL, 2015
Turners Machinery Inc | Santa Paula, CA
Category: Screw Type Injection Molding Machine
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Model: MTS310
Year: 2015
MAKE: MILACRON, MDL: MTS-310, YR: 2015, S/N: TB801DB010089, SHOT SIZE: 26.6 OZ., SCREW SIZE: 60MM, MAX INJECTION PRESSURE: 28100 PSO, PLATEN SIZE: 37" X 37", TIE BAR SPACING: 26" X 26", MAY DAYLIGHT: 53.5", MIN/MAX/MAX MOLD HEIGHT: 7.9" / 29.5", ELCTRICAL: 460V/3 PHASE/60 HZ, LOCATION: SANTA PAULA, CA, MACHINE DIMS: ...more
19" x 30" DoAll #DCDS-750NC, dual column dual miter, 256" blade, 65-328 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DCDS-750NC
19” x 30" Band Saw with Siemens Saw Control with Touch Display Variable Frequency Drive Digital Read Out of Cutting Angle Work Light Hydraulic Band Tension Feed Rate Indicator Automatic Feed Control Automatic Guide Arm Setting Pulley-Driven Band Brush Variable Vise Pressure Control - Set of 2 Dual Acting Index ...more
802 Ton, BAC Baltimore #515E-121-1, Air Coil Series 1500 Two Cell Cooling Tower, S/N U211999901-01-2, 2021
Aaron Equipment Co | Schaumburg, IL
Category: Cooling Towers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Bac
Model: 515E-121-1
Year: 2021
used- bac baltimore air coil model s15e-1212-12kn-2/l series 1500 double cell cooling tower. 802 nominal tonnage. based on 95 degrees f entering water temperature to an 85 degrees f leaving water temperature at a 78 degrees f entering wet-bulb temperature. galvanized panels. (2) 66" diameter axial fans. hinged access ...more
Stationary 6000 lb. Barber Green BE65 x291 BE BatchPac Plant, batch plant
Aggregate Systems Inc | Murfreesboro, TN
Category: Complete Manufacturing & Power Plants
Seller: Aggregate Systems Inc
Location: Murfreesboro, TN
REDUCED PRICE - Stationary 6,000lb Barber Greene Batch Plant Inventory #: BP2701 MAKE REASONABLE OFFER, MUST BE OFF SITE ASAP, Batch Tower Make: Barber Greene Model: BE65 x291 BE BatchPac Plant Capacity (Lb): 6,000lb Portability: Stationary Number of Hot Bins: 4 Hot Bin Size: 45 Ton Hot Bin Serial Number: A2-898-555B ...more
Caterpillar 336-0812X, Crawler Excavator, 1216 hours, S/N: RDL10442, 2023
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Excavators
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: 336-0812X
Year: 2023
;- Foley Work Ready -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, *336 08A HEX, *BEACON SOCKET, *BEARING, SWING STD, *CAB MOUNT, ROPS, *CIRCUIT, COMBINED, *COMMON ARR, *COOLING LINES W/O HEATER, *COUNTERWEIGHT, 14,990LBS, *COVER, REAR HEADER, *DRINK HOLDER, *FINE SWING, *FRAME, SWING ...more
.314" Nakashimada #PF-860, 2 die 3 blow cold header, 50-120 PPM, PKO, DC variable drive
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: PF-860
Cutoff Diameter 8mm 1st Die KO 115mm 2nd Die KO 60mm Pieces Per Minute 50-120 Electrics 15 HP Motor and Controls Weight 22000 Lbs., PKO, DC Vari Drive.
1/2" x 3" National #56S-1, 2-die 3-blow cold header, 150 PPM, bushing cutoff, PKO, 1988
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: 56S-1
Year: 1988
Cutoff Diameter 1/2" MILD Die Kickout 2 1/2" Cutoff Length 3" Pieces per Minute 150 Weight 27,000 KG O.A. Dimensions 14'7" x 5'5"x 7'4"H, Bushing Cutoff, IAC, PKO, RKO.
26" LHI #Super-Chop-XL-15, pneumatic up-cut saw, 15 HP, 5-40 cycles per minute, 8-1/2" x 8-1/2 max square cut, filter, dust chute, double palm button actuation, 2026, new
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: SUPER-CHOP-XL-15
Year: 2026
LHI Super Chop XL-15 Pneumatic Upcut Saw.Up-cutting saw with left-to-right or right-to-left operation (specify when ordering): -- 8-1/2" x 8-1/2" Cap., 26" dia. blade cap. (with 1" dia. tempered arbor), 15 HP BALDOR motor; (5 - 40) cycles/Min. -- Capacity with 26" blade: 1" x 24", 2" x 23-1/2", 3" x 22", 4" x 21", 5" ...more
Genie Industries Z60/34 4WD G84, Articulated Boom Lift, 2255 hours, S/N: Z6014-14334, 2014
Boyd Cat Company | Parkersburg, WV
Category: Boom Lifts
Seller: Boyd Cat Company
Location: Nitro, WV
Mfr: Genie Industries
Model: Z60/34 4WD G84
Year: 2014
* ALARM PKG: FLASHING BEACON, * COLD WEATHER PKG: 5W40 SYN OIL, 5-5-5 FULL MACHINE WARRANTY, 5-YEAR ELECTRICAL/HYDRAULIC/BASE, 8 FT STEEL PLATFORM, 8'1"H X 26'L X 7'W - STOWED, AIR-FILLED ROUGH TERRAIN TIRES, DESCENT ALARM, & TRAVEL ALARM, DEUTZ D2011L03I 3-CYLINDER 48HP, ENGINE S/N 11620572, FREIGHT ...more
JUST ADDED!
Cat 420-07, Backhoe Loader, 1266 hours, S/N: H8T00417, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Backhoe Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Seattle, WA
Mfr: Caterpillar
Model: 420-07
Year: 2020
AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BEACON, MAGNETIC MOUNT, BELT, SEAT, 3" SUSPENSION, BUCKET-GP, 1.4 YD3, PO, BUCKET-HD, 18", 4.2 FT3, CAB, DLX, COLD WEATHER PACKAGE, 120V, CTWT, 1015 LBS, CUTTING EDGE, TWO PIECE, DISPLAY, STD, ENG SN J3625332 MSO C3ZWM, ENG, 74.5KW, C3.6, T4F, FR BT S/N 191106337, GUARD ...more
3/16" x 1-1/2" Waterbury-Farrel #Hi-Pro, DSSD cold header, 225 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: HI-PRO
Maximum Cutoff Diameter 3/16" Maximum Cutoff Length 1 1/2" Die Kickout 1" Pieces per Minute 225 Electrics AC Motor and Controls Weight 3750 Lbs.
Cat 938, Wheel Loader, 133 hours, S/N: EZY00945, 2024
Wyoming Machinery - Cat | Gillette, WY
Category: Wheel Loaders
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Caterpillar
Model: 938
Year: 2024
*CHASSIS AR-938, *ELECTRICAL AR, *ELECTRONICS AR-M, *HYDRAULIC AR, *INSTALLATION AR, *POWER TRAIN AR, AIR CONDITIONING, R134A REF, AUTOLUBE, BEACON, WARNING, STROBE, AMBER, BUCKET-GP, 3.5 YD3, FUS, BOCE, CAB, STANDARD, CAMERA, REAR VIEW, CARRIAGE, CON, 98", FUS, CERTIFICATE OF ORIGIN, ENGL, CTWT, HEAVY,3770LBS,7PCS ...more
JUST ADDED!
0.236" x 3.74" Nakashimada #H20E, Long Stroke DSSD Cold Header, 2.953" shank length, 100-120 pieces/min., 2-plane straightener, 1978
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: H20E
Year: 1978
Cutoff Diameter Alloy Steel 6mm Shank Length 75mm Cutoff Length 95mm Pieces Per Minute 100,120 Electrics AC Motor and Controls Weight 7500 Lbs. O.A. Dimensions 8 x 4 x 6H, 2 Plane Straightener.
JUST ADDED!
Caterpillar 265, 164 hours, S/N: KR413155, 2026
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Compact Track Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Windsor, CO
Mfr: Caterpillar
Model: 265
Year: 2026
164 BW 3/31/26, 2026NP, AIR CONDITIONING, R134A REF, CAB PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, COLD STARTING PACKAGE (120V), COMFORT PKG, ENCLOSED CAB,HVAC, CONSISTS OF:, COUPLER, HYDRAULIC, SELF LEVEL, DOOR, CAB, POLYCARBONATE, END OF CONSISTS, Engine, FAN, COOLING, DEMAND, FUEL, MANUAL PRIMING, GUARDING / ...more
1.22" x 11.81" Sacma #SP-660AL, 5-die long stroke cold former, 80 PPM, 150 KW, linear feed
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Sacma
Model: SP-660AL
Year: 2008
Cutoff Diameter (600N/mm2) 31mm Die Kickout 240mm Cutoff Length 300mm Punch Knockout 64mm Pieces per Minute 80 Forge Pressure 5000 Kn Electricals 150 Kw AC Motor and Controls Weight 110,000 Kg, Bushing Cutoff, TPKO-all 5 Punches, Straight Across Transfer with IFO Cam and Hydraulic Lift, Adjustments from Operator ...more
3/16" x 1-1/2" Waterbury-Farrel #Hi-Pro, DSSD cold header, 270 PPM
National Machinery Exchange | Newark, NJ
Category: Cold Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
Model: HI-PRO
WATERBURY HI PRO DSSD COLD HEADER, MAXIMUM DIAMETER WIRE 3/16", MAXIMUM SHANK LENGTH 1", MAXIMUM CUTOFF LENGTH 1-1/2", MAXIMUM PRODUCTION 270 PPM, APPROX. FLOOR SPACE 32" X 60", APPROX. WEIGHT 3,750 LBS.
Kalamazoo, Abrasive Saw
Power Zone Equipment | Center, CO
Category: Abrasive Saws
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Kalamazoo
Model: ABRASIVE SAW
Brand/Model: Kalamazoo abrasive saw : COMING SOON RPM.
20 Ton, 4 Oz, Morgan-Press #G-100T, Injection Molding Machine, 1980
Revelation Machinery | Chicago, IL
Category: Screw Type Injection Molding Machine
Seller: Revelation Machinery
Location: Chicago, IL
Model: G-100T
Year: 1980
Make: Morgan-Press, Model: G-100T, Year: 1980, Machine Location: Massachusetts, Morgan-Press G-100T Injection Molding Machine, 1980, 1625 Watts, Injection Volume: up to 7.5 cu. in, Injection Volume: 4 oz, Injection Pressure: 9,000 PSI, Clamping Force: 20 ton, Mold Plan Area: 8″ x 11″, Max Processing ...more
JUST ADDED!
.098" x .7" Nakashimada #MH-05, DSSD cold header, 200-250 PPM
Machinery Exchange International | Posen, IL
Category: Cold Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nakashimada
Model: MH-05
2.5mm Max. Cutoff Diameter, 18mm Max. Cutoff Length, 12mm Max. Shank Length, 10mm Max. PKO Stroke 1st Punch, 5mm Max. PKO Stroke 2nd Punch, 200/250 PPM.
Elumatec #SBZ-151, Profile Machining Center, 5-Axis, 10.3 m Bed length, 287.4" X, 45.3" Y, 28.1" Z, 20 kW, 24000 RPM, 20-Position Tool Changer, 2013
Ex-Factory | Charlotte, NC
Category: Window Profile Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: SBZ 151
Year: 2013
ELUMATEC - SBZ 151: CNC Profile Machining Center - 10.3 M5-Axis CNC automatic profile machining center: Designed for flexible and efficient machining of aluminum and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar ...more
3/16" x 1-1/2" Waterbury-Farrel #Hi-Pro, DSSD cold header, 225 PPM, 5 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: HI-PRO
Cutoff Diameter 3/16" Shank Length 1" Cutoff Length 1 1/2" Pieces Per Minute 225 Electrics AC Motor 5HP 220/440 Volts.
1/8" x 1-1/4" National, DSSD high speed cold header, bushing cutoff, 450 PPM, wire straightener
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Cutoff Diameter 1/8" Maximum Shank Length 3/4" Maximum Cutoff Length 1 1/4" Pieces Per Minute 450 Electrics AC Motor and Controls Weight 3200 Lbs., Bushing Cutoff, Wire Straightener, Split Punch Blocks.
