Buy or Sell Your Vertical Press
AI-ranked results for vertical press - closest matches first
400 Ton, Cincinnati #400Hx12, hydraulic, 16' overall, 150" between housing, 12" stroke, 40 HP, e-stop, 1964
Wisconsin Metalworking Machinery | Waukesha, WI
Category: Hydraulic Press Brakes
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Cincinnati
Model: 400HX12
Year: 1964
, MAKE. CINCINNATI, MODEL. 400H X 12, AGE (YEAR). 1964, OVERALL BED LENGTH. 16', DIST. BETWEEN HOUSINGS. 12' 6", BENDING CAPACITY. 400 TONS, CAPACITY. 10' X 1/2", STROKE. 12", RAM SPEED (FAST PRESS). 64 IPM, RAM SPEED (FULL TONNAGE). 27 IPM, RAM SPEED (RETURN). 51 IPM, OPEN HEIGHT. 20", CLOSED HEIGHT. ...more
480 Ton, Baykal #APHS-4116X440, hydraulic press brake, 13' 4"OA, 139" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, Delem DA-69W, 2011
D & D Industries Inc | Monclova, OH
Category: Hydraulic Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
MODEL: APHS 4116×440 CAPACITY: 13′ 5” X 480 TON SERIAL NO.: 17729 OVERALL BENDING LENGTH: 13’ 4” DISTANCE BETWEEN HOUSINGS: 11’ 7” STROKE OF RAM: 12.6” OPEN DAYLIGHT: 23.2” SPEED: ADVANCE: 189 IPM SPEED: PRESSING: 23 IPM SPEED: RETURN: 165 IPM MAXIMUM TRAVEL OF ...more
JUST ADDED!
75 Ton, Dake #5-215, Elec-Draulic H-Frame Press, 10" ram travel, 2 HP
Vander Ziel Machinery Sales | Alto, MI
Category: H Frame Hydraulic Press Machines
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Dake
Model: 5-215
Dake 75 Ton Model 5-215 Elec-draulic H-Frame Press, Serial # 154152, Asset # 17940, Capacity 75 tons, Ram speed inches/Min, Adv. 28, Press 5, Motor 2 HP, Overall height 86", Floor space 36" x 55", Travel of Table 30", Travel of Ram 10", Width between uprights 44", Width between table ...more
140 Ton, Wysong #PHP1040-96, CNC hydraulic press brake, 8' overall, 792" between housing, 14" stroke, 1995
D & D Industries Inc | Monclova, OH
Category: CNC Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Wysong
Model: PHP1040-96
Year: 1995
MODEL #: PHP1040-96, SERIAL #: HPB53-102X, 8' BED, 6' 6" BETWEEN HOUSINGS, 14" STROKE, 9" ADJUSTMENT, 23" MAXIMUM OPEN HEIGHT, BEND WIZARD PC - 800 CNC BACK GAUGE (NEW 2012), 7 AXIS, 60" MAXIMUM BACK GAUGE TRAVEL, 49 GALLON RESERVOIR, 32" FLOOR TO BED, SPEEDS:, 300 IPM ADVANCE, 20 IPM PRESSING, 210 IPM RETURN, FLOOR ...more
100 Ton, Standard Industrial #AB100-12, hydraulic press brake, 12' overall, 125" between housing, 6" stroke, 6" throat, 13" open, 15 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Hydraulic Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Standard
Model: AB100-12
Year: 2026
STANDARD INDUSTRIAL 12′ x 100 Ton AB100-12 Hydraulic Press BrakeManufactured in the USA including a 5 Year warranty!: -- Tonnage Forming/Punching: 100/66 -- Distance between housings: 10’-5"; -- Bed/Ram length: 12’ -- Below grade: No -- Top bed height: 35" -- Bed width: 4.5" -- Throat depth: 6" -- ...more
JUST ADDED!
A.e.s Sirius 950-M CNC Machining Center
RT Machine | Hughesville, PA
Category: Vertical CNC Machining Centers
Seller: RT Machine
Location: Hughesville, PA
Mfr: A.e.s
For woodworking applications requiring drilling, cutting and milling. Drilling Capacity: 10 vertical x 3 horizontal spindles Sawing Capacity: 1 saw arbor Milling Capacity: 1 vertical milling spindle Spindle Motor: 8 HP (5.5 kW) - ER32 X-axis: 9.8" (250mm) Y-axis: 3.14-37.4" (80-950mm) Z-axis: 0.31-2.75" (8-70mm) Axis ...more
73 Ton, Trumpf #Trubend-3066, CNC hydraulic press brake, 6' overall, 69" between housing, Delem DA-65T Control, 2006
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Trumpf
Model: TRUBEND-3066
Year: 2006
73 Tons X 80” Hydraulic Press Brake with Delem DA-65T Graphical Control, Palm Buttons Mounted on Pedestal Station w/ Foot Pedal, Trumpf CNC Multi - Axis Backgauge (X, Y, R, Z1, Z2)., Tonnage: 73 Tons, Bed Length: 80”, Distance Between Housings: 69”, Stroke: 7.87”, Open Height: 14”, Closed ...more
18" x 22" Hyd-Mech #VW-18, mitering vertical band saw, 16' 3" x 1-1/4" blade, coolant, 2003
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hyd-Mech
Model: VW-18
Year: 2003
SERIAL. JW1202017, MODEL. VW-18, YEAR NEW. 2003, CAPACITY (RECTANGLAR). 18" X 22", CAPACITY (ROUND). 17.5", CAPACITY AT 45 DEGREE HOR X VER. 15" X 18", CAPACITY AT 45 DEGREES ROUNDS. 12.5", CAPACITY AT 60 DEGREE HOR X VER. 10.25"X 18", CANTED HEAD. ADUSTABLE TO 3 DEGREES, HYDRAULIC HEAD TILTS. 60 DEGREE EITHER WAY ...more
165 Ton, Pacific #J165-12, CNC Press Brake, 12' overall, 126" Between Housing, 10" Stroke, 7" Throat, 15" Opening Heightm 460 V., 3 Phase, 30 HP, 1978
N S Machine Corp. | Granger, IA
Category: CNC Press Brakes
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Pacific
Model: J165-12
Year: 1978
, Manufacturer: Pacific, Model Number: J165-12, Stock Number: 13898, Model Year: 1978, s:, CNC 600 3-axis control, Light Curtains, Tonnage — 165, Overall length of bed and ram — 12’, Distance between housings — 126”, Capacity — 10’ x 1/4”, Throat depth — 7” ...more
30 HP Fulton #VSRT30, Vertical Spiral Rib Tubeless Steam Boiler, Natural gas, 1005000 BTUH, 1035PPH, 65 sq.ft., 150 PSI, 2019
C3 Surplus LLC | Miami, FL
Category: Tubeless Vertical Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Fulton
Model: VSRT30
Year: 2019
OVERVIEW, Fulton VSRT30 Vertical Spiral Rib Tubeless Steam Boiler - National Board Number 752, Serial Number F10110765A, Year Built 2019. Professional-grade natural gas-fired vertical spiral rib tubeless steam boiler featuring 1,005,000 BTU/HR output capacity with 1,035 lbs/hr steam generation at 150 PSI maximum ...more
53" wide x 99" long, GED #MHMO355013S624T00000, Heated Roller Press, 6" x 88" rolls, 480 V., 2008
Ex-Factory | Charlotte, NC
Category: Roller Type Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ged
Model: MHMO355013S624T00000
Year: 2008
GED - MHMO355013S624T00000 3550: High-Efficiency Oven & Roll Press i-3 - 24 EmitterThe fastest, most "energy efficient" way to produce IGUs, the Oven & Roll Press offers significant energy savings of.50% on units less than 42"; (1067 mm) wide over other IG ovens. With its high intensity infrared emitters and ...more
160 Ton, Coastone #BULL-15, High Tonnage Press Brake, 5.25', 66.5" between housing, 23.6" daylight, LazerSafe, NEW
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Model: BULL-15
Coastone Bull Series Press Brake and Technical Data:, Technical Data DIM Bull 12 Bull 15 Press Tonnage kN(US tons) 1000(110) 1500(160) Motor power kW 2X5 3X5 Max. bending length (D) mm 1320 1620 Distance between side frames mm 1390 1690 Frame width (A) mm 2200 2500 Frame height (B) mm 2650 2950 Frame depth (C) mm 1760 ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5" OA, 139" between housing, 12.6" stroke, 23.2" DL, 19.7" throat, Delem 69W, 2 front support arms, (4) Back Gauge fingers, 2011
Westway Machinery Ltd | Mississauga, ON
Category: Hydraulic Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
S:, Five (5) Axis CNC, Y1, Y2, X, R, plus CNC Crowning, Delem 69W Control (on mobile stand)Laser Safe Laser Beam GuardsPhysical Rear and Side Guarding Included, Safety Interlocked2 Front Support Arms Included, SlidingFour (4) Backgauge Fingers, MODEL: APHS 4116×440, CAPACITY: 13′ 5” X 480 TON, SERIAL ...more
15 Ton, Multipress #M5P-15, hydraulic press, 12" stroke, 18" daylight, 8" throat, 17" x 13.58" bed, 2018
Kempler Machinery | Elk Grove Village, IL
Seller: Kempler Machinery
Location: Elk Grove Village, IL
Mfr: Multipress
Model: M5P-15
Year: 2018
15 Ton Multipress, Model M5P-15, 12" stroke, 18" Daylight, 17" x 13.5" bed, 8" throat, Allen Bradley MicroLogix 1100, Speeds:, Advance (IPM): 420, Press (IPM): 165, Return (IPM): 270, Bore Cylinder Diameter: 4", Ram Cylinder Diameter: 2 1/2", Operating Pressure (Max.): 2,387, Operating Pressure (Min.): 477, Reservoir ...more
30" Bullard #Cutmaster, turret and side heads
O'Connell Machinery Co | Buffalo, NY
Category: Vertical Boring Mills & VTL's
Seller: O'Connell Machinery Co
Location: Buffalo, NY
Mfr: Bullard
Model: CUTMASTER
Year: 1952
STOCK NO. 9734, 30" BULLARD "CUTMASTER" VERTICAL TURRET LATHE, S/N 25474 New Approx.1950, Max Swing 44", Max Distance Table to Rail 25", Cross Rail Vertical Travel 15", Max Distance Table to Face of Turret 36 1/4", Turret Head Vertical Travel 26", Turret Head Toolpost Holes 2 3/4", Table: Built in 3-jaw Chuck 30" ...more
Seiki-XL #3VH, Vertical Mill, 10" x50" table, 60-4200 RPM, 3 HP
Smith Machinery Co | Ames, IA
Category: CNC Vertical Bed Mills
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Seiki-Xl
Model: 3VH
Year: 1992
SEIKI-XL VERTICAL MILL, Table Dimensions (Overall, W x L). 10" x 50", Table Working Surface, W X L. 10" x 50", Longitudinal Table Travel (X-Axis). 30", Cross Saddle Travel (Y-Axis). 12", Vertical Knee Travel (W-Axis). 16", Vertical Head Travel (Z-Axis). 5", Spindle Speeds. 60-4200 RPM, Table Feeds.75 - 35 IPM, Motor ...more
Seiki-XL, CNC Vertical Mill, 30" X, 12" Y, 5" Z, 4200 RPM, 10" x 50" table, 3 HP, 220/440 V.
Smith Machinery Co | Ames, IA
Category: CNC Vertical Boring Mills – includin...
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Seiki-Xl
SEIKI-XL VERTICAL MILL, Table Dimensions (Overall, W x L). 10" x 50", Table Working Surface, W X L. 10" x 50", Longitudinal Table Travel (X-Axis). 30", Cross Saddle Travel (Y-Axis). 12", Vertical Knee Travel (W-Axis). 16", Vertical Head Travel (Z-Axis). 5", Spindle Speeds. 60-4200 RPM, Table Feeds.75 - 35 IPM, Motor ...more
1500 HP 1189 RPM Canadian General Electric, Frame 7966, TEAAC,VSS, vertical solid shaft,hi-thrust, 2300/4160 Volts (3 available)
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: Canadian General Electric
Frame: 7966
30 Ton, Bruderer #BSTA30, 1.57" stroke, 8" Shut Height, 1.57" adj., 100-800 SPM, air clutch & brake, 1985
Wenco Machinery Corp | Ringwood, NJ
Category: High Speed and Automatic Presses
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Bruderer
Model: BSTA30
Year: 1985
TONNAGE RATING 30, TYPE OF CLUTCH/BRAKE AIR, STROKE.375" - 1.57", SLIDE ADJ. 1.57", SHUTHEIGHT ON BED (SDAU) 8" LARGER - HAS SPACER, BOLSTER DIMENSIONS 21" X 17", MOTOR 5 HP/220/3/60, SPEED OF PRESS (SPM) 100 - 800, FEED BBV 190/85.
20 Ton, Multipress #FH-20, 4-post guided ram C-frame press, 12" stroke, 25" daylight, 20 HP
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Multipress
Model: FH-20
MODEL #: FH-20, SERIAL #: 30478, 12" STROKE, 25" DAYLIGHT, 32" x 18" BOLSTER, 30" x 16" POST SPACING, 20 HP, RAM SPEEDS:, 550 IPM CLOSING, 250 IPM PRESSING, 600 IPM RETURN, 4-1/2" BORE, 3-1/4" RAM, 2516 MAXIMUM PSI, 55 GALLON RESERVOIR, 3200 LBS ESTIMATED WEIGHT, GOOD CONDITION.
20 Ton, Multipress #FH-20, 4-post guided ram C-frame press, 12" stroke, 25" daylight, 20 HP
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Multipress
Model: FH-20
MODEL #: FH-20, SERIAL #: 30478, 12" STROKE, 25" DAYLIGHT, 32" x 18" BOLSTER, 30" x 16" POST SPACING, 20 HP, RAM SPEEDS:, 550 IPM CLOSING, 250 IPM PRESSING, 600 IPM RETURN, 4-1/2" BORE, 3-1/4" RAM, 2516 MAXIMUM PSI, 55 GALLON RESERVOIR, 3200 LBS ESTIMATED WEIGHT, GOOD CONDITION.
36" Rockford #SL-36, hydraulic vertical slotter, 6"-36" stroke, 42" table diameter
G-2000 | Toledo, OH
Category: Vertical Slotters
Seller: G-2000
Location: Toledo, OH
Mfr: Rockford
Model: SL-36
MODEL.: SL STROKE.: 6" TO 36" TABLE DIAMETER (T-SLOTTED).: 42" HEIGHT UNDER RAM GUIDE.: 40" RAM GUIDE VERTICAL ADJUSTMENT.: 16" TABLE TO TOOL HEAD (MAX.).: 54" LONGITUDINAL TABLE TRAVEL.: 42" CROSS TABLE TRAVEL.: 36" CUTTING SPEED (VARIABLE).: 0 TO 80 FPM LONGITUDINAL/CROSS/ROTARY FEEDS.:.001" TO.140" PER STROKE ...more
JUST ADDED!
250 Ton, Piranha #25012, Hydraulic Press Brake, 12' overall, 8" stroke, 17" open, 8" throat, 575 V., 3PH
Aucto | San Francisco, CA
Category: Hydraulic Press Brakes
Seller: Aucto
Location: Elmira, ON
Mfr: Piranha
Model: 25012
PIRANHA MODEL 25012 HYDRAULIC PRESS BRAKE WITH 250-TON TONNAGE CAPACITY AND 12 FT BENDING CAPACITY FOR 1/4 IN MILD STEEL. THE MACHINE HAS A 12 FT OVERALL BED AND RAM LENGTH, 10 FT 5 IN DISTANCE BETWEEN HOUSINGS, 8 IN STROKE, 17 IN OPEN HEIGHT, 9 IN CLOSED HEIGHT, 8 IN THROAT DEPTH, AND A 7-1/2 IN BED WIDTH. FLOOR TO ...more
150 Ton, Verson #150-C2-60T Straight Side Press, 5" stroke, 25" Shut Height, 4" adjustment, 24-75 SPM, 60" x36" bolster, Powerflex 753 Controller, Excellent, 1960
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Verson
Model: 150-C2-60T
Year: 1960
Model: SS2-2000-172-60, Stroke: 14", Shut Height: 30", Adjustment: 10", SPM: 10, Bed Size: 172" L-R x 60" F-B, Bolster height: 21", 42" wide windows, Air Clutch, Wintriss Smart Pac2 Press Monitor, Allen Bradley PC700 Panelview Control.
JUST ADDED!
480 Ton, Baykal #APHS-4116X440, CNC hydraulic press brake, 13' 5" overall, 11' 7" between housing, Delem DA-69W, 2011
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
480 Ton X 13’ 5” Hydraulic Press Brake with Delem DA-69W Control, 5 - Axis Backgauge (Y1, Y2, X, R, Crowning) and Floor Standing., Capacity: 13’ 5”, Distance Between Housings: 11’ 7”, Stroke of Ram: 12.6”, Open Daylight: 23.2”, Advance Speed: 189 IPM, Pressing Speed: 23 ...more
Blanchard #20D-36, 36" chuck, 40 HP, 18" vert clearance, coolant reservoir in base, reconditioned, 1973
Tom Hale Equipment Co. Inc | Crossville, TN
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Blanchard
Model: 20D-36
Year: 1973
36 Inch Blanchard Grinder, Model 20D-36, New in 1973, 40 HP Spindle Motor, Wired for 220 Volt Operation, 18 Inches of Vertical Clearance, Coolant Reservoir in Base, $39,500.00 Reconditioned and Loaded Out, Tom Hale Equipment Company, Inc., Best source of Blanchard Grinders, Since 1981, Crossville, Tennessee Tom Hale - ...more
Phoebus #PBM-GEVS500A, Vertical & Horizontal Milling Machine, 14-1/2" x 58" table, 36.2" X, 20.4" Y, 17.3" Z, 5 HP, 1500 & 3600 RPM, 3-axis Fagor digital read out
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Phoebus
Model: PBM-GEVS500A
14-1/2" X 58"36.2"20.4"17.3"#4060 - 3600 RPM - VARIABLE ELECTRIC3.3" - 19.9"65 - 1500 RPM#405 HP5 HPAC SERVO 750 W1 HP81.5" X 75" X 98" TALL6,000 LBS.
Heidelberg #M600A, Web Press System, (4) Print Unit, (1) Folder, 22.75" cutoff x 38" width, 150 kW press drive, 2001
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Heidelberg
Model: M600 A24
Year: 2001
2001 Heidelberg M600A (4) Unit Web Press System + (1) JF44 Folder, 22.75” (578mm) Cutoff x 38” (965mm) Width, - (1) Heidelberg Contiweb SH45-OI-1020 Splicer, - (1) Contiweb Infeed with web guide, - (4) Heidelberg M600 A24 Print Units, Full-Autoplate, Duotrol Dampening, CPTRONIC Remote Inking, Oxry Dry ...more
Brown #SR-3036, inline thermoformer, 30" W x 36" L mold size, 33" sheet width, 2001
Plastimach Corp. | Tappan, NY
Category: Thermoformer Machines
Seller: Plastimach Corp.
Location: Tappan, NY
Mfr: Brown
Model: SR-3036
Year: 2001
Brown Inline Thermoformer, Model: SR-3036, New: 2001, Max Mold Size 30" W x 36" L, Max Sheet Width 33", Top Oven Ceramic Top Oven Zones 6, Bottom Oven Calrod Bottom, Oven Zones, 6 Oven Style, Retractable Clamshell Rail Heaters, Top Platen Stroke 7.375, Bottom Platen Stroke 7.375", Draw Depth 6.0", Platen Drive Air ...more
Schuetz Tool #SS-48-96-H, Membrane Veneer Press, 55" x 106" Press capacity, (2) Shuttle Tables
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schuetz Tool
Model: SS 48 96 H
Schuetz Tool Bladder Press, for veneer laminating (not thermofoil).: -- (2) Shuttle tables, approx. 55"; x 106"; press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200F. Can use PVA which would extend cycle time to approx. ...more
108" / 120" Giddings & Lewis #517 Series, live spindle VTC, 1993
Industrial Machine Tools Inc | Anacortes, WA
Category: CNC Vertical Boring Mills – includin...
Seller: Industrial Machine Tools Inc
Location: Anacortes, WA
Mfr: Giddings & Lewis
Model: 517 SERIES
Year: 1993
Giddings & Lewis 108” / 120” Live Spindle VTC, Model: 517 Series, Stock #: 10799-I, Serial No.: 517-0006-93, Year: 1993, Table Diameter.108”, Swing Diameter (max.).120”, Height Under Rail (max.).72”, Table Speeds, (2 gear ranges).To 150 RPM, Rail Elevation Travel.28”, Ram Travel ...more
6" Pratt & Whitney #B, vertical slotter, 0-6" stroke of ram, 15" table to ram, 10" vertical adjustment of ram, 3 HP
Yoder Machinery Sales | Holland, OH
Category: Vertical Slotters
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pratt & Whitney
Model: B
SERIAL. 215LENGTH OF STROKE. 0 TO 6"TABLE TO RAM (MAXIMUM). 15"VERTICAL ADJUSTMENT OF RAM. 10"ROTARY TABLE DIAMETER (T-SLOTTED). 19-1/2"STROKES PER MINUTE. 33 - 49 - 76 - 116LONGITUDINAL TABLE TRAVEL. 25"CROSS TABLE TRAVEL. 20"LONGITUDINAL & CROSS TABLE FEEDS.0027" TO.0243" PER STROKEROTARY TABLE FEED.009" TO.085" ...more
JUST ADDED!
100 Ton, Wysong #FAB100-120, Hydraulic Press Brake, 10' overall, 102" between housing, 17" open, 9" Shut Height, 8" stroke, 7" throat, 25 HP, 38" Back Gauge, 1999
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Wysong
Model: FAB100-120
Year: 1999
100 Ton X 10’ Press Brake with PC Controls, 38” CNC Backgauge (Installed in 2019), Lower Die Rail, Pedestal Stand w/ Dual Palm Buttons and Emergency Stop., Tonnage: 100 Tons, Bending Length: 120”, Distance Between Housings: 102”, Rated Capacity @ 10’: 10 GA, @ 8’ 7”: ...more
90 Ton, Cincinnati #90AF-6, Autoform Hydraulic Brake, 8' Bed & Ram length, 6.5' Between Housings, 14" Ram Stroke, 7" Throat depth, 15 HP, 1991
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 90AF-6
Year: 1991
SERIAL. 47363MODEL. 90AF-6YEAR NEW. 1991CAPACITY. 90 TONOVERALL LENGTH OF BED & RAM. 8'DISTANCE BETWEEN HOUSINGS. 6'6"STROKE OF RAM. 14"OPEN HEIGHT. 21"CLOSED HEIGHT. 7"DEPTH OF THROAT. 7"RAM SPEED RAPID APPROACH. 380 IPMRAM SPEED PRESSING. 1 TO 120 IPMRAM SPEED NORMAL RETURN. 11 TO 405 IPMBACK GAUGE CNC. ...more
700 Ton, Muller Weingarten #630.36, Transfer Press, 15.75" Stroke, 55" x 142" Bolster & Ram Size, 24" ID x 72" od Coil, 12" Feed Pitch, 80-60 SPM, 2006
Machine Tool Bids | Chicago, IL
Category: Eyelet Transfer Press Machines
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Muller
Model: 630.36
Year: 2006
MACHINE, Tonnage: 700, Strokes Per Min: 8-60, Slide Adjustment: 9.8, SPM: F-B 55" x L-R 142", Ram size: F-B 55" x L-R 142", Max Upper Die Weight: 13,240 lbs, Shut Height: 35.4", Feed Direction: R-L, Stroke: 15.75", Press Window: 37" x 67.5" (W x H), Feeder Type: Roll, Coil Cradle or ...more
50 Ton, Betenbender, Hydraulic Press Brake, 6' overall, 8" throat, 12" open, 6" Shut Height, 54.5" between housing, 10 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Hydraulic Press Brakes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Betenbender 6′ x 50 Ton Hydraulic Press Brake, Inventory # 10069, Model: 6′ x 50 Ton, S/N: 43293, Made in USA, Width of Bed: 2″, Width of Upper Machined Ram: 1 3/4″, Throat Depth: 8″, Open Height: 12″, Closed Height: 6″, Height of Bed: 28″, Distance Between Housings: 54 ...more
36" x 13" DoAll #36-13-20, vertical band saw, 5200 FPM, work light
D & D Industries Inc | Monclova, OH
Category: Vertical Band Saws
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Doall
Model: 36-13-20
ORDER 36, 36" THROAT, 13" VERTICAL CLEARANCE, 0-5200 FPM BAND SPEEDS, SAW BLADE LENGHT 125 - 175, 30 X 30 TILTABLE TABLE, 17" X 20" INNER TABLE, WORK LIGHT, 550V, 47" X 76" X 74"T APROX., 2500 LBS APROX..
75 Ton, Minster #7, fixed base gap frame press, 4" stroke, 21" Shut Height, 3.5"adj., 36" x24"bed, 90 SPM, 5" bolster plate, air clutch & brake
Great American Eqpt Co | Cincinnati, OH
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Minster
Model: 7
Year: 1991
75 TON MINSTER FIXED BASE GAP FRAME PRESS, Model #7, 4" Stroke, 3.5" Slide Adj, 21" Shut Height, 36" x 24" Bed, 5" Bolster Plate, 45-90 SPM, New 1991., 1991 Minster 7-SS-FB, Air Clutch & Brake, Free Standing Control Console, 5" Bolster Plate., Tonnage Capacity. 75 T, Stroke Length. 4", Adjustment. 3.5", Shut ...more
96" Sour Vertical Separator, 2-phase, 14 psi, 1979
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Whitecourt, AB
Year: 1979
For sale: A vertical sour separator manufactured by Alco Gas and Oil, with CRN V-105. Built in 1979, this unit has a diameter of 96 inches and a separator length of 48 feet. It operates at a maximum pressure of 14 psi and is designed for two-phase service. Located in Whitecourt, AB, Canada, this vessel is not housed ...more
Cincinnati #205-12 Cinel 60, horizontal/vertical mill, 54-1/2" x 12" table, coolant, rapid traverse
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 205-12
SERIAL. 5J2P5P-15MODEL. CINEL 60 205-12TABLE AREA (T-SLOTTED). 54-1/2" X 12"LONGITUDINAL TABLE TRAVEL. 28"CROSS TABLE TRAVEL. 12"VERTICAL TABLE TRAVEL. 16"HORIZONTAL SPINDLE SPEEDS. 25 TO 1500 RPMSPINDLE TAPER. #50 NSTABLE BACKLASH ELIMINATOR. YESCOOLANT. YESRAPID TRAVERSE. YESMAIN SPINDLE MOTOR. 7-1/2 HORSEPOWER.
Iberpresse #PRA-1-1423, veneer membrane press, 55" x 90" platen, 300 ton, 2001
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Iberpresse
Model: PRA-1-1423
Year: 2001
IBERPRESSE PRA-1-1423 Veneer Membrane press Platen dimensions of 55" x 90" (1,400 x 2,300 mm); bottom platen, same size top platen with a 47" x 82" (1,200 x 2,100 mm) reset for membrane. -- Infeed: Right-to-left through feed, flat power (indexed for charging a load) conveyor, 96" L x 55" W. -- Outfeed: Gravity roller ...more
Bradbury, 4 notch heads, 28 Unitool punch heads press
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
BRADBURY PRE-PUNCH AND NOTCH PRESS, ADJUSTABLE ENTRY EDGE GUIDES. 12" MAX WIDTH, THREE NOTCHING PRESSES. 7" BETWEEN POST, SIX POST PRESS WITH UNIPUNCH PUNCHES. 28 PUNCHES, DIE SET SIZE. 24" X 40", FLATTNER TWO ROLL. 5"DIA., PASS LINE HEIGHT. 40".
75 Ton, Greenerd #HC-75-25R12, hydraulic C-frame press, 18" stroke, 13" throat, 1980
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Greenerd
Model: HC-75-25R12
Year: 1980
SERIAL. 79T3704, MODEL. HC-75-25R12, YEAR NEW. 1980, CAPACITY. 75 TON, AREA OF TABLE. 33" X 22", STROKE. 23", DEPTH OF THROAT. 13", OPEN HEIGHT. 30", CLOSED HEIGHT. 7", DIAMETER OF CYLINDER. 7", RAM SPEEDS ADVANCED. 156 IPM, RAN SPEED PRESSING. 60 IPM, RAM SPEED RETURN. 156 IPM, JOG/RUN & AUTOMATIC CYCLES. YES ...more
Kearney & Trecker #307-S12, vertical mill, 12" x62-1/2" table, 34" X, 12" Y, 18" Z, #50 NS, coolant, 7.5 & 5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 307-S12
SERIAL. 17/9383, MODEL. 307-S12, AREA OF TABLE. 62-1/2" X 12", SPINDLE SPEEDS HORIZONTAL. (24) 14 TO 2400 RPM, LONGITUDINAL AND CROSS FEEDS. (16) 1/4 TO 32 IPM, VERTICAL FEEDS. (16) 1/8 TO 16 IPM, TABLE SWIVELS LEFT OR RIGHT. 47 DEGREES, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL. 18", DISTANCE ...more
200 Ton, U.S. Industrial #USHB200-8/10/13, USHB250-13, CNC hydraulic press brakes, 8'/10/13OA, new, #14314-14317 (4 available)
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Press Brakes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: U.S. Industrial
Model: USHB200-8
NEW 200 TON x 8" US INDUSTRIAL MODEL USHB200-8 CNC HYDRAULIC PRESS BRAKEBase Price PORSTANDARD EQUIPMENTRam Deflection AdjustmentMechanical Ram Depth ControlMassive Torsion Bar For ParallelismForged Heavy Duty Cylinder & Cylinder BodyThree Speed RamRapid Approach, Bending Cycle & Rapid RetreatBottom Time ...more
110 Ton, Energy Mission Splendid series #PBR-1030, cnc press brake, 7" x 10' table, 6" stroke, 13" open, 7" Shut Height, 8" throat, 10 HP, Cybelec Cyb Touch 8PS Control, laser curtain, new, 2025
Bud's Machine Tools | Murray, UT
Category: CNC Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Model: PBR-1030
Year: 2025
Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBR 1030Condition:New - In-StockYear:2025Stock #:1913Status:For SaleCountry:United States, Bending Tons 110, Bending Capacity (Mild Steel) 10′, Table Size 7" x 10′, Clear Pass. 100", Ram Strokes 6", Open Height 13", Closed ...more
110 Ton, Cole-Tuve #CF-110, C-frame hydraulic press, 11.8" stroke, 19.6" daylight, 7.88" Shut Height, 10.2" throat, 2003
HCI Machines | Venetia, PA
Seller: HCI Machines
Location: Venetia, PA
Mfr: Cole-Tuve
Model: CF-110
Year: 2003
110 TON COLE TUVE C-FRAME HYDRAULIC PRESSStk# 2104a :MANUFACTURER. COLE-TUVEMODEL. CF-110SERIAL NUMBER. CF/SB-1-22003AGE. 2003TONNAGE. 110 TONSSTROKE (ADJ.).25" TO 11.8"SPEEDSADVANCE. 50 IPMPRESS. 23 IPMRETURN. 137 IPMMAX. SHUT HEIGHT. 7.88"DAYLIGHT (MAX OPENING). 19.6"THROAT DEPTH. 10.2"TABLE. 23.5" X 43.5"RAM. 16.5" ...more
118 Ton, 30.5" x 20.5" bed, 12" str.on clamp cylinder, 4"-40" DL, 8" trnsfr cylinder, #2440
Icon Industries, Inc | Grand Rapids, MI
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
BED IS NOMINAL 30.5" X 20.5". TOP PLATE UNDER TRANSFER POT IS 24" X 18.5" X 3.5". T-SLOTS TOP AND BOTTOM. MAIN RAM APPROX 10" BORE WITH APPROX 12" MAX STROKE. SIDE PULL-BACK CYLINDERS: APPROX 3" BORE; 1.75" ROD AND 12" STROKE. OPENING BETWEEN BED AND TRANSER POT IS ADJUSTABLE FROM APPROX 4" TO 40" (ADD 11.5" TO BOTH ...more
JUST ADDED!
7,840 Ton, Siempelkamp, Down-Acting Hydraulic Press, 72.8" dl, 39.37" ram stroke, (4) 200 HP power units, 2000
KD Machinery | Scottsdale, AZ
Category: Hydraulic Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Siempelkamp
Year: 2000
Used Siempelkamp Down-Acting (2000) Hydraulic Press for Sale. This pre-owned Siempelkamp press is located in The United States. If you have any questions regarding this Siempelkamp Press, please feel free to contact us. You may Activate Pricing to view the price of this CNC Machine, or request a quote by clicking on ...more
12 Ton, Neff #D12-5M, hydraulic C-frame press, 1/2" -7" stroke, 7" throat, 5 HP, dual palm buttons, 1995
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Neff
Model: D12-5M
Year: 1995
SERIAL. 10077, MODEL. D125-5M, YEAR NEW. 1995, CAPACITY. 12 TONS, STROKE. 1/2" TO 7", OPEN HEIGHT. 18", CLOSED HEIGHT. 11", BED AREA. 14" L-R X 10-1/4", ROD DIAMETER. 3.25", THROAT. 7", RAM SPEED ADVANCE. 312 IPM, RAM SPEED PRESS. 153 IPM, RAM SPEED RETURN. 300 IPM, DUAL PALM BUTTONS. YES, ELECTRIC FOOT PEDAL. YES ...more
30 Ton, Oak #30-LP-30, straight side double crank high speed press, 1" stroke, 10" Shut Height, 165-400 SPM, 1983
Wenco Machinery Corp | Ringwood, NJ
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Oak
Model: 30-LP-30
Year: 1983
Serial Number: 30-LP-30-916 Tons: 30 Stroke: 1" Area of Bed And Bolster: 40" x 15-1/2" Bed Opening: 26" x 6" Shut Height on Bolster SDAU: 10" (8"-10") Withdrawal Travel 8" to 11" Bolster Thickness: 3" Press Speed: 165-400 SPM Motor Size: 15 HP 1800 RPM Voltage: 460/3/60.
600 Ton, Minster Hevistamper #E2-600-84-48, high speed press, 12" stroke, 32" Shut Height, 60 SPM, 84" x48" bed, Wintriss Smart Pac Control, air clutch & brake, 1988
Rygate, LLC | Clarkston, MI
Category: High Speed and Automatic Presses
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Minster
Model: E2-600-84-48
Year: 1988
Model Number: E2-600-84-48, Serial Number: E2-600-26613, Bed Area: 84” x 48”, Slide Area: 84” x 48”, Stroke: 12”, Strokes per Minute: 0-60, Shut Height: 32” over bed, Shut Height: 25” over bolster plate, Bolster Plate: 7” thick t-slotted plate, Slide Adjustment: ...more
No. BMD1090 Enerpat Briquetters, Metal Chips Briquette Press Machine, 3.5" Briquettes, 15 HP, Siemens/Schneider PLC, Unused
Enerpat | Central Ohio, OH
Category: Briquetters
Seller: Enerpat
Location: Los Angeles, CA
Mfr: Enerpat
Model: BMD1090
Year: 2026
Enerpat America Briquette Press Machine – Puck Type – Compact footprint, double productivity, ready-to-ship from California – New, never used!, Press Force: 100 Ton Briquette Diameter: 3.5" (90 mm) Motor: 15 HP (11 kW) hydraulic motor package (Siemens/Schneider) Hydraulic Cylinders: Brand-name ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5"OA, 140" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, 2011
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
2011 Baykal APHS 4116 x 440 Hydraulic Press Brake, 480 Ton, 13'5" Bed Length. s 140" between housings, 12.6" stroke, and 23.2" daylight opening. a 40 HP motor, overall dimensions 200"x90"x138". Weight approx. 60,000 lbs., MODEL: APHS 4116×440, CAPACITY: 13 5 X 480 TON, SERIAL NO.: 17729, OVERALL BENDING ...more
50 Ton, Neff #DF, C-frame hydraulic press, 10" stroke, Koyo DO-05RD Direct Control, 15 HP, 1992
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Neff
Model: DF
Year: 1992
SERIAL. 9423, MODEL. DF, YEAR NEW. 1992, CAPACITY. 50 TONS, STROKE. 0" TO 10" MAXIMUM, OPEN HEIGHT. 24", CLOSED HEIGHT. 14", AREA OF BED. 36" X 21", AREA OF RAM. 34" X 16", THROAT DEPTH. 10", RAM DIAMETER. 7", FULL-CYCLE STROKES PER MINUTE. 16, RAM PRESSING SPEED. 160 IPM, PRESSURE ADJUSTMENT. YES, FAST & SLOW ...more
16" Sweet Vertical Test Separator 2 Phase, 1479 psi
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Grande Prairie, AB
Year: 1982
For sale: A vertical POP tank with a diameter of 16 inches, manufactured by Sure Weld Industries in 1982. This portable tank has an operational status of 'Connected' and is designed for sweet service type with a maximum pressure of 1479 psi. The inspection report is attached for review. Located in Grande ...more
16" Sweet Vertical Separator, 1480 psi, 2013
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Blackfalds, AB
Year: 2013
Available for sale: a new surplus vertical separator, model T4926-231, manufactured in 2013. This unit s a diameter of 16 inches, a maximum temperature of 100°F, and can withstand pressures up to 1480 psi. Designed for sweet service type and currently in disconnected operational status. Located in Blackfalds, AB ...more
4 Ton, Denison #DF4CO4D10A80DG6520, Hydraulic Press, 6" stroke, 2" RAM
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Denison
Model: DF4CO4D10A80DG6520
Rated Capacity.(Tons). 4, Ram Area.(Dia.). 2", Stroke. Adjustable to 6", Speeds. (Closing). 500 IPM,. (Pressing). 200 IPM,. (Return). 300 IPM, Motor. 3 HP, AC 3/60/220-440, Weight. 1,400 lbs., 3 HP AC 3/60/220-440 MOTOR, 7-1/4 GPM PUMP 970 PSI.
JUST ADDED!
75 Ton, Dake #5-075, hydraulic h-Frame press, 10" stroke, 35" between housing, 360" x 32" table, 2 HP, 230-460 V.
Machinery Central | Louisville, KY
Category: H Frame Hydraulic Press Machines
Seller: Machinery Central
Location: Louisville, KY
Mfr: Dake
Model: 5-075
, Dake 30' 75-ton hydraulic straightening press, Model 5-075. power column traverse, 2 HP Elec-Draulic workhead, variable ram speed, and three adjustable supports. Dimensions: 360" x 64" x 96". Ideal for fabricating needs., Spec Sheet:, 75 TON DAKE ELEC-DRAULIC H-FRAME TRAVELING-COLUMN HYDRAULIC STRAIGHTENING ...more
6 Ton, Denison #WR65L-C-464FS1, Hydraulic C-Frame Press, 18" x 11.5" bed, 12" stroke, 16" daylight, 7.5" throat, 10-gallon reservoir, 1450 psi, 9.41 GPM pump, 5 HP, 230-460 Volts, 1984
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Denison
Model: WR65L-C-464FS1
Year: 1984
6 TON DENISON HYDRAULIC C-FRAME PRESS MODEL WR65L… S/N″0192… NEW 1984 RATED CAPACITY. 6 TONSSTROKE. 12"THROAT. 7-1/2"DAYLIGHT. 16"PRESSING SPEED. 150 IPMRETURN.″75 IPMCLOSING. 150 IPMBED.(R-L X F-B). 18" X 11.5"MAXIMUM PRESSURE. 1450 PSIRESEVOIR. 10 GALLONSPUMP. 9.41 ...more
350 Ton, Pullmax Optima #320, hydraulic, 11" stroke, 10" throat, Cybelec DNC80 Multi Axis CNC, 1995
Aleco Machinery Sales | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pullmax
Model: 320
Year: 1995
Pre Owned 1995 Pullmax Optima 320 CNC Hydraulic Press Brake, Serial Number: Capacity 350 Tons, Overall Length of Bed & Ram 145”, Distance Between Housings 124”, Open Height 22”, Stroke 11”, Shut Height (SDAU) 11”, Throat 10”, Working Height 39”, Bed Width 11.89”, Oil ...more
Mereen Mereen Johnson " Select-A-Rip" #312-DC/SR1, Straight line rip saw, 6" throat, 50 HP, 3600 RPM, 2-9/16" diameter arbor, 30-150 FPM, New
RT Machine | Hughesville, PA
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen Johnson
Model: 312-DC/SR1
Mereen-Johnson Model 312-DC/SR1 "Select-A-Rip" Straight Line Arbor space of 12" featuring a 1" minimum to 12" maximum cutting capability between saws. 2-3/4" maximum thickness using 14" diameter tooling. 30" minimum length glue-joint accuracy, 22" minimum length for bust-up only. 6" throat. Minimum rip width using ...more
200 Ton, Standard Industrial #AB200-12, hydraulic, 12' overall, 125" between housing, CNC & Back Gauge avail, 28000 lbs, new
AR Tools & Machinery Inc | Spokane, WA
Category: Hydraulic Press Brakes
Seller: AR Tools & Machinery Inc
Location: Spokane Valley, WA
Mfr: Standard
Model: AB200-12
Year: 2023
TONNAGE FOR FORMING/ FOR PUNCHING 200/133, DISTANCE BETWEEN HOUSINGS 10′-5”, BED/RAM OVERALL LENGTH 12′, BELOW GRADE no, WEIGHT (LBS.) 28,000, BED HEIGHT 38”, BED WIDTH 5”, OVERALL HEIGHT (approx.) 115”, THROAT DEPTH 10”, RAM STROKE (FULLY ADJUSTABLE) 8”, OPEN HEIGHT ...more
Goss & Deleeuw #M600A, Web Press System, (4) Print Unit, (1) Folder, 22.75" cutoff x 38" width, 50 kW press drive, 2004
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Goss & Deleeuw
Model: M600A
Year: 2004
2004 Goss M600A (4) Unit Web Press System + (1) JF44 Folder, 22.75” (578mm) Cutoff x 38” (965mm) Width, - (1) Goss Contiweb SH45-CP Splicer, - (1) Contiweb Infeed with web guide, - (4) Goss M600 A24 Print Units, Full-Autoplate, Duotrol Dampening, CPTRONIC Remote Inking, Oxry Dry Blanket washers, - (1) Main ...more
20 Ton, L & J #PM2-20, straight side double crank press, 1.5" stroke, 650 SPM, double roll feed
Wenco Machinery Corp | Ringwood, NJ
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: L & J
Model: PM2-20
TONNAGE RATING 20 TYPE OF CLUTCH/BRAKE AIR STROKE 1-1/2" SLIDE ADJ. 2" SHUTHEIGHT ON BED (SDAU) 11" BOLSTER DIMENSIONS 24" X 19" SPEED OF PRESS 0 - 650 SPM TYPE OF FEED PERFECTO DOUBLE ROLLFEED 4" WIDE X 3"ADVANCE DIMENSIONS 104" LONG (49" W/O FEEDS) 43" WIDE 75" HIGH APPROX. WEGHT 9500 LBS INCLUDES NEW PRESS & ...more
250 Ton, Beckwood #LSP-250-6464, Linear Servo Screw Press, 60" daylight, 36" stroke, 64" x 64" bolster, AB Control, 2023
Variegate Inc | Huntsville, AL
Category: Servo Drive Presses
Seller: Variegate Inc
Location: Huntsville, AL
Mfr: Beckwood
Model: LSP-250-6464
Year: 2023
Model: Beckwood LSP-250-6464 - Servo Roller Screw Press, Linear Servo Press’s Nitches:, - Off center loading, - Draw and Punching Work with Nitrogen Die Systems, - Heated Platen Applications, - Precision Forming, - High Cleanliness Requirements, Capacity: 13 to 250 Tons, Stripping Capacity: 187 Tons, Day Light: ...more
100 Ton, Greenerd, hydraulic press, 18" stroke, 24" daylight, 28" x 20" bed, 13" throat, 60 HP
Timco Inc | Columbia, TN
Category: Hydraulic Presses
Seller: Timco Inc
Location: Columbia, TN
Mfr: Greenerd
GREENERD 100 TON HYD PRESS, STOCK# 14401J, 18" STROKE, 24" DAYLIGHT, 22" X 9.5" RAM, 28" X 20" BED, PALM BUTTONS, 13" THROAT, 8" CYLINDER, NEEDS CONTROL BUILD HAVE PANEL, SPEEDS, ADVANCE 102 IPM, PRESSING 95 IPM, RETURN 202 IPM, 60 HP 230/460/60/3, 69" X 44" X 102", 42" X 72" X 112", 15,000 LBS APROX, FOB: MONCLOVA ...more
18" x 24" Hemsaw #V120HA, vertical band saw, 65-400 SFPM, 1998
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V120HA
Year: 1998
SAW CAPACITY:18 in Horizontal, 24 in Vertical @ 90 degrees, MITER: 18 in Horizontal, 16 in Vertical @ 45° (left miter), 18 in Horizontal, 14.75 in Vertical @ 45° (right miter), BLADE SIZE: 1-1/4 in x 16 ft0 in x.042 THK, BLADE DRIVE: 7.5 HP, 220V/440V AC, 3 ph, 1,800 rpm, ball bearing TFC, HYDRAULICS: 2 HP ...more
75 Ton, Dake #5-075, elec-draulic H-frame hydraulic press, 10" stroke
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Dake
Model: 5-075
75 TON DAKE H-FRAME ELEC-DRAULIC HYDRAULIC PRESSMODEL 5-075 RATED CAPACITY. 75 TONSWIDTH BETWEEN UPRIGHTS. 44"WIDTH BETWEEN TABLE CHANNELS. 8-1/4"SPPED.(ADVANCE). 28 IPM.(PRESS). 5 IPM… MINIMUM RAM TO TABLE. 6"… MAXIMUM RAM TO TABLE.″6" RAM TRAVEL. 10"… HORIZONTAL ...more
400 Ton, Clearing Niagara #SC2-400-120-60, straight side double crank, 12" stroke, 42" Shut Height, 14" adj., 15-40 SPM, 120" x60" bed, Smart Pac, 1998
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Niagara
Model: SC2-400-120-60
Year: 1998
MODEL.: SC2-400-120-60, TONNAGE.: 440 TON, STROKE.: 12", SHUT-HEIGHT.: 42", ADJUSTMENT.: 14", STROKE PER MINUTE.: 15-40 SPM, BOLSTER THICKNESS.: 7.50", BED SIZE.: 120" L-R X 60" F-B, RAM SIZE.: 120" L-R X 60" F-B, T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, MOTOR HP.: 60 HP, VOLTS.: 460, PRESS WEIGHT.: 160,000 LBS ...more
400 Ton, St. Lawrence #SHD1-4P-400, hi-speed, 50 ton ejector, 12" str, 48" DL, 30" x 60" bolster, 36" SH, 38" between columns, 1999
Mauldin Machine Inc | Jacksonville, AR
Category: Extrusion Presses
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: St. Lawrence
Model: SHD1-4P-400
Year: 1999
ONE PREOWNED 400 TON ST LAWRENCE EXTRUSION PRESS W/50 TON EJECTOR, MODEL SHD1-4P-400, S/N 9414, NEW APPROX 1999, Capacity-Main Ram @ 1506 P.S.I. 400 Ton, Capacity-Ejector 50 Ton, Stroke of Ejectors in Inches 6”, Daylight 48”, Shut Height 36”, Stroke 12”, Bolster Area 30” x 60”, Ram ...more
160 Ton, Scotchman #Propress-176MT, hydraulic H-frame press with moveable table, #3014004
Vander Ziel Machinery Sales | Alto, MI
Category: H Frame Hydraulic Press Machines
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Scotchman
Model: PROPRESS-176MT
Scotchman 160 Ton Hydraulic H-Frame Press with Moveable Table, Model ProPress 176MT, SKU # 3014004, Capacity 160 Tons, Motor 4 HP, RPM 3000, Ram Speed – Approach 17 ipm, Ram Speed – Press 5 ipm, Ram Speed – Return 22 ipm, Open Height, Minimum 7”, Open Height, Maximum 36 1/2”, Stroke 15 ...more
600 Ton, Pacific #600-5-SCSS, 30" stroke, 48" daylight, 67" x 60" bed, cushion, t-slot ram, 1964
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Pacific
Model: 600-5-SCSS
Year: 1964
MODEL: 600-5-SCSS, SERIAL #: 2786, YEAR: 1964, 30" STROKE, 40" DAYLIGHT, 67" x 60" BED AREA, 60" x 60" RAM AREA, 11.5" T-SLOTTED BOLSTER, T-SLOTTED RAM, 24" WIDE x 30 TALL WINDOWS, 20" DIAMETER CYLINDER, CUSHION, 46" x 46" CUSHION PAD, 12" CUSHION STROKE, HYDRAULICS MOUNT ON TOP OF PRESS, REMOVABLE, ADJUSTABLE ...more
JUST ADDED!
300 Ton, Bernardo #BHP-300 Mach hydraulic H-frame press
Yoder Machinery Sales | Holland, OH
Category: H Frame Hydraulic Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bernardo
Model: BHP-300
SERIAL. 2024111301MODEL. BHP-300YEAR NEW. 11/2024 CAPACITY. 300 TONSSTROKE. 15-3-4"DISTANCE BETWEEN UPRIGHT. 47-3/4"DISTANCE BETWEN SIDE FRAMES. 11-1/4"DISTANVE BETWEEN BED. 11-1/4"BED. 66" X 18"BED PLATE. 48" X 43"BED ADJUSTMENT. 10"SPEED PRESSING. 8.2 MM PER SECOND RETURN SPEED. 11.2 MM PER SECOND OPENING HEIGHT. 0 ...more
Enerpat #AMB-H, Aluminum Chips Metal Baler - 100-250 Ton - 60 Bales/hr - In Stock
Enerpat | Central Ohio, OH
Seller: Enerpat
Location: Los Angeles, CA
Mfr: Enerpat
Model: AMB-H
Year: 2026
Hopper-Style AMB-H Automatic Scrap Metal Baler – fully automatic continuous press metal baler for high-volume scrap. Efficiently compresses light scrap including aluminum cans, metal turnings, metal chips, and other nonferrous materials into dense, easy-to-handle bales. Its large-capacity hopper allows ...more
JUST ADDED!
50 Ton, Dake #909250, hydraulic H-frame press, 16" stroke, 44" btwn uprights, new, never used, 2018
Yoder Machinery Sales | Holland, OH
Category: H Frame Hydraulic Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dake
Model: 909250
Year: 2018
SERIAL. 1397356MODEL. 909250YEAR NEW. 2018CAPACITY. 50 TONDISTANCE BETWEEN UPRIGHTS. 44"WIDTH BETWEEN TABLE CHANNELS. 8-1/4"STROKE OF RAM. 16"DIAMETER OF RAM. 2 1/2"DISTANCE RAM TO BED. 10" MIN, 41-3/4" MAXRAM SPEED PRESSING. 11 IPMPHASE. 1VOLTAGE. 110/220HORSEPOWER. 2CONDITION. PRESS IS NEW NEVER BEEN USED.
75 Ton, Minster #7, 4" stroke, 21" Shut Height, 90 SPM, 36" RLx24" FB Bed, air clutch
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Minster
Model: 7
OBI Press for Sale Manufacturer: Minster Model: Minster 7D Press Condition: Very Good Location: Columbia, TN Warehouse Year: 1967 Machine #: 6611 CAPACITY 75 TONS STROKE 4″ MAX. SHUT HEIGHT TO BED 21″ SLIDE ADJUSTMENT 4″ MOTORIZED BED AREA 36″ X 24″ (RL X FB) BOLSTER PLATE 3.25″ H X ...more
10 Ton, Denison, Hydraulic C Frame Press, 16" x 21.5" bed, 24" open height, 12" stroke, 12" throat depth, 2" ram diameter, 7.5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Denison
SERIAL. 13210, MODEL. GC10C022C29C15A68S06, CAPACITY. 10 TON, STROKE. 0" TO 12" MAXIMUM, OPEN HEIGHT. 24", CLOSED HEIGHT. 12", AREA OF BED. 16" X 21.5", BOLSTER. 16 X 21.5 X 2", DEPTH OF THROAT. 12", DIAMETER OF RAM. 2", RAM SPEED ADVANCE. 190 IPM, RAM SPEED PRESSING. 190 IPM, RAM SPEED RETURN. 260 IPM, PRESSURE ...more
500 HP 1800 RPM U.S. Motors, Frame 5012P, weather protected enclosure type 1, VHS, vertical hollow shaft, 300%EHT, new, 2300/4000 Volts
Dykman Electrical, Inc. | Boise, ID
Category: Vertical Pump Motors
Seller: Dykman Electrical, Inc.
Location: Boise, ID
Mfr: U.S. Motors
Frame: 5012P
300 Ton, Niagara #SC2-300-72-42P, straight side double crank mechanical press, 8" stroke, 27" Shut Height, air clutch, 1980
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Livonia, MI
Mfr: Niagara
Model: SC2-300-72-42P
Year: 1980
Tonnage 300, Stroke 8 inches, Shut Height 27 inches, Adjustment 12 inches, Bed Size 72" LR x 42" FB, Ram Area 72" LR x 42" FB, SPM 30 - 60 VSPM, Standard, Used Niagara Press Straight Side Press, Model# SC2-300-72-42, Mechanical Metal Stamping Press, 300 ton Capacity, 8" Stroke, 21" Die Height on Bolster, 27" Shut ...more
440 Ton, Stamtec #S2-400, straight side double crank press, 11.8" stroke, 27.5" Shut Height, 8.27" adj., 20-40 SPM, 118.11" x55.12" bed, air clutch & brake, 1999
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Stamtec
Model: S2-400
Year: 1999
MODEL S2-400, S/N S80854, 11.81" STROKE, 20-40 SPM, 27.56" SHUT HEIGHT OVER BOLSTER, 8.27" RAM ADJUSTMENT, 118.11" X 55.12" BED AND RAM, 75 HP MAIN MOTOR, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, HYDRAUIC OVERLOADS, UNISORB PRESS MOUNTS, NEW 1999, LINK LIGHT CURTIANS, PALM BUTTONS, 42.16" WINDOWS, FLOOR STANDING ...more
Heidelberg #Speedmaster-XL-105, Sheetfed Offset Press Systems, 4,5,6,8, or 10 color
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Sheetfed Offset Printers
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Model: SPEEDMASTER-XL-105
Year: 2009
Machinery Solutions Group offers used Heidelberg Speedmaster XL 105 sheetfed offset presses in a variety of configurations for commercial print, packaging, folding carton, and specialty print production., Heidelberg Speedmaster XL 105 Sheetfed Offset Presses, Manufacturer: Heidelberg, Model: Speedmaster XL 105, Type: ...more
Blanchard #18-36, 36" chuck, 30 HP, 18" vert clearance, coolant reservoir in base, refurbished, 1960
Tom Hale Equipment Co. Inc | Crossville, TN
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Blanchard
Model: 18-36
Year: 1960
36 Inch Blanchard Grinder, Model 18-36, New in 1960, Spindle Drive Motor 30 HP, 220/440 Volt, 3 phase, 18 Inches of Vertical Clearance, Coolant Reservoir in Base, $34,500.00 Refurbished and Loaded Out, Tom Hale Equipment Company, Inc., Best source of Blanchard Grinders, Since 1981, Crossville, Tennessee Tom Hale - ...more
OKK #MH-3V, vertical milling machine, 65" x14-1/4" table, automatic lube, coolant, #50NS
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-3V
SERIAL. 421, MODEL. MH3V, TABLE SIZE. 65" x 14-1/4", LONGITUDINAL TRAVEL. 36-1/4", CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 45 TO 1500 RPM (24), TABLE FEEDS. (12) 1/2 TO 86-1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34-1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" TO ...more
Cincinnati #Vercipower-550-20, vertical mill, 94.5" x20" table, 50 HP, #11370
Vander Ziel Machinery Sales | Alto, MI
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Cincinnati
Model: VERCIPOWER-550-20
Cincinnati Model 550-20 Vercipower Vertical Mill, 94 1/2" x 20", Asset #11370, Serial # 311053V5V-9, Working Surface 94 1/2" x 20", T-Slots (3) 3 13/16", Distance between Slots 4.25", Longitudinal Range 50", Cross Range 18", Vertical Range 24", Spindle Taper 50 Taper ...more
JUST ADDED!
Vac-U-Clamp #Thermofoil-FT-800, membrane vacuum press, 50" x 105" platen, 24,000 watt quartz elements, 2016
KD Machinery | Scottsdale, AZ
Category: Vacuum Membrane Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Vac-U-Clamp
Model: THERMOFOIL FT 800
Year: 2016
Used Vac-U-Clamp Thermofoil FT 800 (2016) Thermo Former for Sale. This pre-owned Vac-U-Clamp thermoformer machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Vac-U-Clamp Thermo Former, please feel free to contact us. You may Activate ...more
36" x 12" DoAll #V36, Vertical Bandsaw, 2 HP, blade welder, tilt table
Nationwide Machinery Sales | Troy, MI
Category: Vertical Band Saws
Seller: Nationwide Machinery Sales
Location: TROY, MI
Mfr: Doall
Model: V36
Do-All V-36 Vertical Bandsaw, Model V36, S/N 36474124, Throat capacity: 36", Table size: 30-1/2" x 30-1/2", Blade speeds: 50-1600 FPM, Blade length: 120", Blade width capacity: 1/8" - 1", Vertical clearance: 12", Main motor: 2 HP, Blade welder, Tilt table, NO BLADES.
Manchester, 182" flooded nip size press, 60 HP, with 32.057" x 182" face roll
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Manchester
182" Flooded nip size press, 60hp, w/ 32.057 x 182" face roll.
300 Ton, Standard #DC300, hydraulic C-frame press, 12" stroke, 14" throat, 50 HP, #73994
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Standard
Model: DC300
MODEL. DC300, CAPACITY FORMING. 300 TON, CAPACITY PUNCHING. 200 TON, STROKE. 12", OPEN HEIGHT. 24", CLOSED HEIGHT. 12", RAM AREA T SLOTTED. 44" X 24", BED AREA T SLOTTED. 48" X 24", PASS HEIGHT. 32", THROAT. 14", DISTANCE BETWEEN HOUSINGS. 34", RAM SPEEDS (RAPID). 175 IPM, RAM SPEED NORMAIL PRESS. 27 IPM, RAM SPEED ...more
Sharp #VH-25, Vertical/Horizontal Milling Machine, 10" x 56" Work Table, 36" L x 16.5" width Travel, 17.5" Knee & 18.5" Ram Travels, 4 & 5 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: VH-25
Sharp 10″ x 56″ Vertical/Horizontal Milling Machine, VH-25, Inventory # 2241, Model: VH-25, A versatile model with “two machines in one” design, offering vertical and horizontal milling operations in one set-up. Changing over from one operation to the other is quick and simple. All it takes is ...more
4000 Ton, CCCP hydraulic press, (2) 49.2" strokes, 147.6" daylight, 98.45" SH
Paramount Industries | Saint Clair Shores, MI
Category: Hydraulic Presses
Seller: Paramount Industries
Location: Saint Clair Shores, MI
Mfr: Cccp
We are pleased to offer for immediate sale this used 4000 ton Hydraulic CCCP press with the below. Please call Ted Gillespie at the above toll free phone number for price and further press. Ted can also arrange inspection for buyers and quote shipping to major Cities worldwide., Here are the basic confirmed in Inches ...more
Thompson #16V, vertical rotary surface grinder, 18" x 18" x 192" capacity, #62165
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Thompson
Model: 18 X 18 X 192 ROTARY 16V
SERIAL. 16V606262, MODEL. 16V, GRINDING CAPACITY. 18" x 18" x 192", VERTICAL CAPACITY. 18" (UNDER 20" WHEEL), LONGITUDINAL TRAVEL. 192", VERTICAL ROTARY HEAD. YES, SPINDLE MOTOR. 50 HP, HYDRAULIC PUMP. 15 HP.
187 Ton, Trumpf #Trumabend-V170, CNC hydraulic press brake, 8-Axis, 13' overall, 144" between housing, 1998
Machinery Network Inc | Encino, CA
Category: CNC Press Brakes
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Trumpf
Model: TRUMABEND-V170
Year: 1998
Manufacturer: TRUMPF, Model: V170, Year: 1998, Stock #: 41612, Status: For Sale, Tonnage 187 T, Type HYD, OA Length 13', Between Housings 12', Stroke Length 14", # Axis 8, Capacity 187 Tons x 160", Maximum Bending Length 13' 4", Distance Between Housings 145", Stroke (Adjustable) 14.37", Distance - Floor ...more
133 Ton, Energy Mission #HHP-125, hydraulic H-frame, 11.8" stroke, 10 HP
Bud's Machine Tools | Murray, UT
Category: H Frame Hydraulic Press Machines
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: HHP-125
Overview, Type:Hydraulic H-Frame PressManufacturer:ENERGY MISSIONModel:HHP 125Condition:Build To OrderStock #:1817Status:For Sale, Applications:, Forming of various automobile parts, Various embossing shapes in sheet metal, Straightening of I-beam and plates, Dish end forming, Forming of different shapes in sheets ...more
400 Ton, St. Lawrence #SHD1-4P-400, 12" stroke, 8" daylight, 30" x 60" bed, fast, 1999, #2526C
Mauldin Machine Inc | Jacksonville, AR
Category: Hydraulic Presses
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: St. Lawrence
Model: SHD1-4P-400
Year: 1999
ONE PREOWNED 400 TON ST LAWRENCE EXTRUSION PRESS W/50 TON EJECTOR, MODEL SHD1-4P-400, S/N 9414, NEW APPROX 1999, Capacity-Main Ram @ 1506 P.S.I. 400 Ton, Capacity-Ejector 50 Ton, Stroke of Ejectors in Inches 6”, Daylight 48”, Shut Height 36”, Stroke 12”, Bolster Area 30” x 60”, Ram ...more
55 Ton, Rousselle #B1-55, OBI press, 3" stroke, 21" Shut Height, air clutch & brake, 1991, #65881
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rousselle
Model: B1-55
Year: 1991
SERIAL. P-31763, MODEL. B1-55, YEAR NEW. 1991, CAPACITY. 55 TON, STROKE OF SLIDE. 3", SLIDE ADJUSTMENT. 4", SHUT HEIGHT, SDAU. 21", AREA OF BED. 24" X 25", AREA OF RAM. " X ", WIDTH OF HOLE THROUGH BACK. ", STROKES PER MINUTE. 120 SPM, AIR CLUTCH & BRAKE. YES, CLUTCH & BRAKE CONTROL. WINTRESS, PRESS MONITOR ...more
100 Ton, Contech #3662, hydraulic die cutting Press, 2019
Global Equipment International | Chalfont, PA
Category: Die Cutting Press Machines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Contech
Model: 3662
Year: 2019
Contech Converting Technologies, Inc. 3662 Web Press Paper Film Equipment., This is an automatic die cutting press so you can cut shapes out of paperboard, non-wovens,vinyl's, laminates, poly films and others materials., The Contech has a 4 roll unwind station so you can have 4 layers to cut through. Create a ...more
OKK #MH-3V, vertical mill, 14-1/4" x65" table, coolant system, automatic lube, digital read out, #50 NS, #75084
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-3V
SERIAL. 4118, MODEL. MH-3V, TABLE SIZE. 65" x 14 1/4", LONGITUDINAL TRAVEL. 36-1/4", SADDLE CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 19 TO 1900 RPM (24), TABLE FEEDS. (12) 1/2 TO 86 1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34 1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" ...more
12 Ton, PH #OGM-12, hydraulic press, 10" stroke, 12.5" daylight, 8" throat, 23" x17.5" bed, Allen Bradley SLC100 controller
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: OGM-12
10" STROKE, 12.5" DAYLIGHT, 23" X 17.5" BED, 8" THROAT, 45 GALLON OIL RESEVOIR, 2361 MAX PSI, PALM BUTTONS, SPEEDS, ADVANCE 402 IPM, PRESSING 148 IPM, RETURN 237 IPM, ALLEN BRADLEY SLC100 CONTROLLER, 10 HP, 230/460 V, 34" X 52" X 99" T APPROX., 3000 LBS APPROX. WEIGHT.
South Bend #Veriner-SA, horizontal mill with vertical head, 12" x47" table, 5 HP, coolant
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: South Bend
Model: VERINER-SA
SERIAL. 12354, MODEL. VERINER SA, AREA OF TABLE. 12" X 47", SPINDLE SPEEDS. 32 TO 1500 RPM, FEEDS.12 TO 26.87 IPM, LONGITUDINAL TRAVEL. 32", CROSS TRAVEL. 12, VERTICAL TRAVEL. 16", POWER RAPID TRAVERSE. YES, TAPER IN SPINDLE. #30 NS, COOLANT. YES, OVER ARM SUPPORTS. 2, UNIVERSAL VERTICAL HEAD. YES, HORSEPOWER MAIN ...more
