Buy or Sell Your Vertical Press
AI-ranked results for vertical press - closest matches first
250 Ton, Hellen #YK41-550T, 25.9" stroke, 20" SH, 32" open, 12" vertical ram, pedestal Control, #A6632
Sterling Machinery Exchange | South El Monte, CA
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hellen
Model: YK41-550T
Year: 2015
Vertical Ram Tonnage 250 Ton Opposed Horizontal Rams 150 Tons Each Vertical Press Stroke 26" Vertical Press Open Height 29" Vertical Press Shut Height 3" Horizontal Press Stroke (Left Side) 20" Horizontal Press Stroke (Right Side) 20" Horizontal Press Open Height 70" Horizontal Press Shut Height 30" Dimensions (L x W ...more
250 Ton, Hellen #YK41-550T, hydraulic horizontal / vertical press, 25.9" stroke, 20" SH, 12" vert ram, 32" open, pedestal Control, 2014, #A6631
Sterling Machinery Exchange | South El Monte, CA
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hellen
Model: YK41-550T
Year: 2014
Vertical Ram Tonnage 250 Ton Opposed Horizontal Rams 150 Tons Each Vertical Press Stroke 26" Vertical Open Height 29" Vertical Shut Height 3" Horizontal Press Stroke. Horizontal Press Stroke Left Side 20" Horizontal Press Stroke Right Side 20" Horizontal Press Open Height 70" Horizontal Press Shut Height 30" ...more
Comet #10C Bend-Wiz, hydraulic vertical press brake, 4" stroke, 10" punch & die height
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Comet
Model: 10C
SERIAL. VPB35, MODEL. 10C, PUNCH & DIE HEIGHT. 10, STROKE. 4, WORKING SPEED.25/SECOND (APPROXIMATE), RETURN SPEED. 1/SECOND (APPROXIMATE), TABLE SIZE: 16 1/2 x 40, TABLE HEIGHT: 34 1/2 (WITH MOBILE BASE), TOOLING. AMERICAN PRESS BRAKE DIES 1/2 TANG, DUAL FOOT PEDAL. YES, NOTCHER ON END. YES, PHASE. 1, VOLTAGE. ...more
Comet #10A Bend-Wiz, hydraulic vertical press brake, 4" stroke, 10" punch & die height
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Comet
Model: 10A
ERIAL. VPB2, MODEL. 10A, PUNCH & DIE HEIGHT. 10, STROKE. 4, WORKING SPEED.25/SECOND (APPROXIMATE), RETURN SPEED. 1/SECOND (APPROXIMATE), TABLE SIZE: 16 1/2 x 40, TABLE HEIGHT: 34 1/2 (WITH MOBILE BASE), TOOLING. AMERICAN PRESS BRAKE DIES 1/2 TANG, DUAL FOOT PEDAL. YES, PHASE. 1, VOLTAGE. 110, MOTOR HORSEPOWER. 1.
20 KVA Lors #120AP, air operated vertical press type spot welder, 18" throat, 208 V.
Machinery Solutions Inc | Lexington, SC
Category: Press Type Spot Welders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lors
Model: 120AP
Lors 120AR, 20 KVA Spot welder, Entron control, S/N 2812773 Stock# UD100331: Capacity @ 50% duty cycle: 20 KVA Throat dept: 18" Primary volts: 208 Frequency: 60 hz Secondary volts (min-max): 1.7 to 4 Voltage: 208v/60hz/1ph Fused: 70 amp Approximate weight: 800 Lbs.
50 Ton, Loomis #341-50A-Press, lab press, 4-stanchions, 21-1/2" vertical opening, 7" stroke, handwheel adjustable heat
Detroit Process Machinery | Detroit, MI
Category: Hydraulic Presses
Seller: Detroit Process Machinery
Location: Detroit, MI
Mfr: Loomis
Model: 341-50A-PRESS
LoomisMODEL 341-50A Press, Loomis Lab Hydraulic Press for laminating, pelletizing, forming, etc. 50 force, four stanchions, 21 1/2″ maximum vertical opening, 7″ stroke, handwheel adjustable heat, Enerpac 1 hp hydraulic pump operating at 115 volt, 1 phase, 60 hertz, STOCK NUMBER: DPM-2352.
10 Ton, Dake #972210, pneumatic H-frame press, 10000 psi, 8" stroke, 38" DL
Wheeler Machinery Sales | Pomona, CA
Category: Pneumatic Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dake
Model: 972210
Dake 972210 Pneumatic H-Frame Press #7238 #1, Maximum Operating Pressure (psi): 10,000, Capacity (imperial tons): 10, Maximum Vertical Daylight (in): 38, Maximum Bed Width (in): 16.75, Power Source Type: Manual, Power Source Valve: Manual, Cylinder Stroke (in): 8, Rapid Advance Speed (in/sec): 4, Pressing Speed ...more
Press Transfer Sys, Orii #RY-120WPKX, single arm transfer w/pick & place fingers, 1990
D & D Industries Inc | Monclova, OH
Category: Press Accessories and Parts
Seller: D & D Industries Inc
Location: Monclova, OH
Model: PRESS TRANSFER SYS
Year: 1990
MODEL: RY-120WPKX, SERIAL #: 98 RT00059, 96" LR TRANSFER, SINGLE ARM TRANSFER WITH PICK AND PLACE FINGERS, YEAR: 1990, 1.1"-3.9" VERTICAL STROKE, 8.8 LB MAXIMUM WORKPIECE WEIGHT, RY CONTROLLER, 500 KG MACHINE MASS, GOOD CONDITION.
50 Ton, Amada #RG5020LD, Hyraulic Press Brake, 78.8" L Bend, 59.9" Bet. Housing, 15.76" Throat, 3.94" Stroke, 14.58" H Open, 2005
Machinery Marketing International | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Amada
Model: RG5020LD
Year: 2005
Maximum bend length: 78.8", Press Capacity: 50 US tons, Vertical stroke of lower beam: 3.937", Between Housings: 59.9", Throat: 15.76", Stroke: 3.94", Open Height: 14.58", Hydraulic Capacity: 13.46 gallons, Rising speed of lower beam (in. /sec) at 60Hz: 2.323", Bending speed of lower beam (in. /sec) at 60Hz: 0.433" ...more
250 Ton, OToole Systems, 4-post press, 18" x 30" btwn posts, 21.5" vertical clearance
Liberty Machine Works | Preston, ID
Category: Hydraulic Presses
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Otoole Systems
This press is in good working condition and ready to go to work. It measures 18" X 30" between posts and 21.5" of vertical clearance., Motor is 20HP, 230V or 460V, Footprint is 80" wide by 60" deep. Height is 9'4", Located at our warehouse in Preston, Idaho, We care about the machines we sell and want all of them ...more
50 Ton, Amada #RG5020LD, hydraulic press brake, 6.5'OA, 59.9" between housing, 3.94" stroke, 15.76" throat, Amada LD, 2005
Machine Tool Bids | Chicago, IL
Category: CNC Press Brakes
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Amada
Model: RG5020LD
Year: 2005
MACHINE, Press Capacity: 50 US tons, Maximum bend length: 78.8", Vertical stroke of lower beam: 3.937", Between Housings: 59.9", Throat: 15.76", Stroke: 3.94", Open Height: 14.58", Hydraulic Capacity: 13.46 gallons, Rising speed of lower beam (in. /sec) at 60Hz: 2.323", Bending speed of ...more
150 Ton, Enerpac, H-Frame hydraulic shop press, electric, 13" stroke, 48.5" daylight, 10000 psi, 48" bed width
Mullin Machinery | Farmingdale, NJ
Category: H Frame Hydraulic Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000 Capacity –150 Tons Maximum Vertical Daylight –48.5″ Maximum Bed Width –48″ Power Source Type-Electric Cylinder Model Number-RR20013 Cylinder Type-Double-Acting, Hydraulic Return Cylinder ...more
Jones #P-225, Press Master Vertical Screw Press, w/Vibratory Shaker Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-225
Beloit Jones Vertical Screw Press, Model P-225 Pressmaster - s stainless steel contact parts and includes a vibratory shaker discharge. Serial number P-485., Basis: FOB.
150 Ton, Enerpac, H-Frame Hydraulic Shop Press, 13" stroke, 48.5" daylight, 48" bed width, 10,000 psi
Mullin Machinery | Farmingdale, NJ
Category: H Frame Hydraulic Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000Capacity –150 TonsMaximum Vertical Daylight –48.5″Maximum Bed Width –48″Power Source Type-Electric 208-230/460 3phCylinder Model Number-RR20013Cylinder Type-Double-Acting, Hydraulic ReturnCylinder ...more
35 Ton, AIM, hydraulic press, as-is
iGAM | Detroit, MI
Category: Hydraulic Presses
Seller: iGAM
Location: Detroit, MI
Mfr: Aim
The AIM 35 Ton Hydraulic Press* is a used industrial pressing system sold AS-IS, offered with a bin of loose components presumed to complete the unit. While originally understood to be a 35-ton capacity system, this rating cannot be confirmed. Designed with a generous bed size and height clearance, this hydraulic ...more
2250 Ton/1000 Ton, Rotem Rotem Hyundai #SL4-2250-4500x2400MB / SL4-1000-4500x2400MB, straight side transfer press
D & H Machinery Inc | Toledo, OH
Category: Eyelet Transfer Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rotem Hyundai
Model: SL4-2250-4500X2400MB
Rotem-Hyundai 2250 ton / 1000 ton Straight Side Transfer Press Line, Model: SL4-2250-4500x2400MB / SL4-1000-4500x2400MB, Main Press :, Press Type: Single-action, 4-point eccentric overdrive Mechanical Press, Capacity: Press (#1) 2250 ton and Press (#2) 1000 ton, Entry loading robot, Robot Transfer from Press #1 to ...more
8 Ton, Airam, 4-Axis cut-off press, 10" x15" bed, 15 between posts, 13" die height, #52530
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Airam
Model: 0008
CAPACITY. 8 TON, BED. 10" X 15", DISTANCE BETWEEN POST. 15", DIE HEIGHT. 13", 6 WAY BASE. YES, PASS LINE HEIGHT. 28" TO RAIL, VERTICAL ADJUSTMENT. 6".
JUST ADDED!
6 Ton, Haeger #HP6-B, hydraulic insertion press with Autofeed Bowl USA, foot switch, 1.5 HP
Equipment Hub | Decatur, GA
Category: Hardware Inserting Presses
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haeger
Model: HP6-B
Stock #: 133260012, Location: Sarasota, FL, Location: F.O.B. Sarasota, Florida, Brand: HAEGER, Model: HP6-B, Serial #: 1019, Approx. Shipping Weight: 1200 Lbs., Approx. Shipping Dimensions: 30" x 36" L x 68'' H, Tonnage: 6 T, Maximum Force: 12,000 Lbs. (54 KN.), Electrical Requirements: 3/60/230 volts ...more
55 Ton, OTC, Hydraulic H-Frame Press, 15" open height, 32" between housings, 6-1/4" stroke, 3" cylinder rod diameter, 1.5 HP, 10,000 psi, 115 Volt, 1PH
Yoder Machinery Sales | Holland, OH
Category: H Frame Hydraulic Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Otc
CAPACITY. 55 TON, STROKE. 13", BED AREA. 42" X 14-1/4, DISTANCE BETWEEN UPRIGHTS. 42", DISTANCE RAM TO BED. 42", DISTANCE BETWEEN BED FRAME. 8-1/2", VERTICAL ADJUSTMENT OF BED. 36", RAM HEAD TRAVEL. 29-1/2", RAM SPEED RAPID ADVANCE. 21.7 IPM, RAM SPEED PRESSING. 1.5 IPM, PHASE. SINGLE, VOLTAGE. 115, MOTOR HORSEPOWER. ...more
6 Ton, Haeger #HP6-B, hydraulic insertion press, 8.5" stroke, 18" throat, 3/8"-8.5" vertical upstroke, vibratory autofeed bowl
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: HP6-B
6 TON HAEGER HYDRAULIC INSERTION PRESSMODEL HP6-B… S/N 1201 MAXIMUM FORCE. 12,000 LBS. (6 tons)STROKE LENGTH. 0 - 8-1/2"VERTICAL UPSTROKE.″/8" - 8-1/2"THROAT DEPTH. 18"OIL CAPACITY. 18 GALLONSMOTOR. 230 v /″ Ph / 60 Weight: 1,000 lbs.Dimensions:″0" x″6" x ...more
AEF, Bicycle rim inline ring cut-off press, hydraulic pump, #68645
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Aef
AEF BICYCLE RIM ROLL FORMER WITH CUT OFF., TWO STAND ROLL FORMER. YES, ARBOR DIAMETER. 2", ROLL SPACE. 4", VERTICAL ADJUSTMENT. 3", LOWER ARBOR CENTERLINE FROM BASE. 6", PINCH ROLLS. 6", FORMING ROLLS. 5", AIR ACCTUATED CUT OFF DIE. YES, PASSLINE HEIGHT. 44", HYDRAULIC PUMP WITH TANK. YES.
MPC #140 Stator end turn frame blocker / hydraulic vertical stator press, 1998
TNT Industrial | Orange, CA
Category: Hydraulic Presses
Seller: TNT Industrial
Location: Orange, CA
Mfr: Mpc
Model: 140
Year: 1998
MPC's 140 Series Vertical End Turn Blockershave been on the job for almost 40 years. The individual cuff support finger maximizes the protection of the slot cell insulation by maintaining clearance between the iron and the windings, which also assures adequate clearance for the lacing needle..
Natco #10J, multi-spindle vertical drill press
iGAM | Detroit, MI
Category: Multi Spindle Drill Presses
Seller: iGAM
Location: Detroit, MI
Mfr: Natco
Model: 10J
NATCO 10J six spindle drill press available in used condition. Ideal for various industrial applications. A reliable choice for those seeking robust performance from a trusted manufacturer., Spec Sheet, NATCO 10J, Weight. 999.
6 Ton, Haeger #HP6-B, hydraulic insertion press, 8.5" stroke, 18" throat, 3/8"-8.5" vertical upstroke, autofeed bowl
Generation Machine Tools | Sarasota, FL
Category: Hardware Inserting Presses
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Haeger
Model: HP6-B
HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA, ImperialMetricTonnage 6 T 5.443 t Dimensions 30” x 36” L x 68’’ H 30” x 36” L x 68’’ H Weight 1200 Lbs. 1200 Lbs. HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA #6836, Reference # ...more
Cemco, multi spindle drill press / vertical boring machine wood or aluminum
TNT Industrial | Orange, CA
Category: Multi Spindle Drill Presses
Seller: TNT Industrial
Location: Orange, CA
Mfr: Cemco
Find many great new & used options and get the best deals for CEMCO MULTI SPINDLE DRILL PRESS / VERTICAL BORING MACHINE WOOD OR ALUMINUM. Free shipping for many products!.
7000 Ton, Bliss #HS-7000-4R-48-144, vertical hydraulic down acting press
Mauldin Machine Inc | Jacksonville, AR
Category: Hydraulic Presses
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: Bliss
Model: HS-7000-4R-48-144
Year: 1954
8 Ton, Haeger #824, hardware insertion press, 8" stroke, 24" throat, 8" vertical upstroke, bowl feeder, electric foot pedal, 1998
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: 824
Year: 1998
HAEGER MODEL 824 HARDWARE INSERTION PRESSMODEL 824… S/N 08H00643… NEW 1998 Maximum Force. 8 TonsThroat Depth. 24"Throat Height. 15"Stroke Length (Adjustable). 0"- 8"Vertical Upstroke (Adj.). 1/2"- 8"Oil Tank Reservoir. 18 GallonsMotor.″ HP 220 / 440V Approximate ...more
6 Ton, Haeger #HP6-B, hydraulic insertion press, 8.5" stroke, 18" throat, 3/8"-8.5" vertical upstroke, autofeed bowl
Generation Machine Tools | Sarasota, FL
Category: Hardware Inserting Presses
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Haeger
Model: HP6-B
HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA #7676, ImperialMetricTonnage 6 T 5.443 t Dimensions 30” x 36” L x 68’’ H 30” x 36” L x 68’’ H Weight 1200 Lbs. 1200 Lbs. HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA #7676 ...more
70 Ton, Dake #70H, Hydraulic Press, S/N 113982
Smith Machinery Co | Ames, IA
Category: H Frame Hydraulic Press Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Dake
Model: 70H
Year: 1947
Tonnage 70 tons Dimensions 7' TALL, 4' RL, 32" FB Weight 1245 pounds, STROKE (HAND OPERATED): 4-1/2" & 7" SCREW TRAVEL, ADJ. OPENING RAM TO TABLE: 6" TO 36" VERTICAL OPENING, USABLE TABLE SIZE: 44" RL X 16-1/4" FB, 8-1/4" OPENING IN TABLE, HORIZONTAL RAM TRAVEL: 29-1/2" RL, -- SUBJECT TO VERIFICATION--.
6 Ton, Haeger #HP6-C, Insertion Press, 18" throat, 8" stroke (2 available)
Wheeler Machinery Sales | Pomona, CA
Category: Hardware Inserting Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Haeger
Model: HP6-C
HAEGER HP6-C Insertion Press #8173 #1, Capacity: 6 Tons, Throat Depth: 18", Stroke Length (Adjustable): 0-8 1/2", Vertical Up Stroke (Adjustable): 3/8" - 8 1/2", Oil Tank Resevoir: 18 Gallons, Machine Dimensions: 36" x 30" x 67", Approx. Weight: 1560 LBS.
6 Ton, Haeger #HP6-C, hardware insertion press, 8.5" stroke, 18" throat, 3/8" - 8-1/2" vertical upstroke, Haeger AF-MAS vibratory feeder bowl
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: HP6-C
6 TON HAEGER HYDRAULIC INSERTION PRESSMODEL HP6-C… S/N 2296… NEW 1993 MAXIMUM FORCE. 12,000 LBS. (6 tons)STROKE LENGTH. 0 - 8-1/2"VERTICAL UPSTROKE.″/8" - 8-1/2"THROAT DEPTH. 18"OIL CAPACITY. 18 GALLONSMOTOR. 230 v /″ Ph / 60 Weight: 1,000 lbs.Dimensions:″0" ...more
18" x 22" Marvel #Series-8-Mark-II, vertical band saw, 14' 6" x 1" x .035" blade, 50-450 FPM, 5 HP, 2012
Machinery Marketing International | Chicago, IL
Category: Vertical Band Saws
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Marvel
Model: SERIES-8-MARK-II
Year: 2012
tbd, For sale: Marvel Series 8 Mark II Vertical Band Saw (2012). This high-quality CNC machine offers precision and reliability for industrial cutting applications. advanced s, its perfect for demanding tasks, Cutting Capacity @ 90: 18 x 22, Cutting Capacity @ 45: 18 x 12.75, Tilt: 0 to 45 Left and Right, DRIVE MOTOR: ...more
6 Ton, Haeger #HP6-C, Insertion Press, 18" throat, 8.5" stroke, w/ AF-AH bowl feed
Wheeler Machinery Sales | Pomona, CA
Category: Hardware Inserting Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Haeger
Model: HP6-C
HAEGER HP6-C Insertion Press w/ Haeger AF-AH Bowl Feed #8174 #1, Capacity: 6 Tons, Throat Depth: 18", Stroke Length (Adjustable): 0-8 1/2", Vertical Up Stroke (Adjustable): 3/8" - 8 1/2", Oil Tank Resevoir: 18 Gallons, Machine Dimensions: 36" x 30" x 67", Approx. Weight: 1560 LBS, Haeger AF-AH Bowl Feed.
40 KVA Lors Machinery #140AP, spot press type welder
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Press Type Spot Welders
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Lors
Model: 140AP
Key Technical :, Manufacturer: Lors Machinery Inc. (Kenilworth, N.J.), Model: 140AP, Serial Number: 478-2271, Power Rating: 40 KVA @ 50% Duty Cycle, Secondary Voltage: 2.3V Minimum to 5.5V Maximum, Frame Style: Vertical press-type with adjustable lower arm, s & Equipment:, Control System: Entron Resistance Welding ...more
225 Ton, Haco #ERMS36225, CNC Press Brake, 12' overall, 124" Between Housing, 12" Throat, 8" Stroke, 575 V., 2003
Savona Equipment | Savona, BC
Category: CNC Press Brakes
Seller: Savona Equipment
Location: Savona, BC
Mfr: Haco
Model: ERMS36225
Year: 2003
Haco ERMS36225 225 Ton Press Brake, Make: HacoModel: ERMS36225Type: Press BrakeYear: 2003Condition: Used ConditionCapacity: 225 TonBed Length: 144inColumn Distance: 124inThroat: 12inVertical Stroke: 8inWorking Speed: 7mm/sBed Width: 8inVoltage: 575 VoltControls: Haco ATS 560 Control Panel, Overall Dimensions: Length: ...more
Cut-Off press #450-12, 14 stands, 1-3/4" arbor, 8" roll space, 10 HP, 100 FPM
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: 450-12
SERIAL. 240, MODEL. 450-12, STANDS. 14, ARBOR. 1-3/4", ROLLSPACE. 8", HORIZONTAL CENTERS. 10", VERTICAL CENTERS. 4-1/2" TO 5-12", BASE TO LOWER SPINDLE SPINDLE. 6", SPEED. 100 FPM, CONTROLS. YES, MOTOR. 10 HP.
150 Ton, Enerpac #IPE-150, H-frame hydraulic shop press with 10000 psi power unit, 13" stroke
Lenmark Industries | Langley, BC
Category: H Frame Hydraulic Press Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Enerpac
Model: IPE-150
SKU: 138325, Model: IPE 150, Condition: Used, Tons: 150 ton, Electrical :, Stroke: 13", Additional :, Pristine condition, no leaks and ready to work, Vertical daylight: 12" to 48" adjustable in 10" increments, Area of bed: 48" x 23.25", Power unit: Enerpac PEM8418D with 575/600 VAC 3 Ph ...more
59" Metso #VPA-15, Vertical Plate Pressure Filter Press (2 available)
Savona Equipment | Savona, BC
Category: Plate and Frame Filter Presses
Seller: Savona Equipment
Location: Savona, BC
Mfr: Metso
Model: VPA 15
Dual Metso VPA Plate Pressure Filter Press, Quantity: Package of (2) Units, Make: MetsoModel: VPA 15Type: Vertical Plate Pressure Filter PressCondition: Used ConditionFilter Size: 1500mm x 1500mmDrive: HydraulicComes With: Supporting Equipment and Structures, Location: Western Canada.
JUST ADDED!
25" Fosdick, Single Spindle Heavy Duty Drill Press, 23" table, 60-1500 RPM, 5 HP
Wheeler Machinery Sales | Pomona, CA
Category: Single Spindle Drill Presses
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Fosdick
Fosdick Single Spindle Heavy Duty Drill Press 25" #5950 #1, 25" Swing, 12 1/2" : Spindle Center to Lower Column, 12" : Spindle Center to Upper Column, 26": Max. Distance Spindle to Table, 23": Area of Work Table, 12" : Power Feed Spindle Travel, 16": Vertical Table Travel, 18": Vertical Adj. of Sliding Head, 60-1500 ...more
300 Ton, Shepard-Niles #142, hydraulic horizontal wheel / bearing press, pendant Control
Yoder Brothers Machinery | Toledo, OH
Category: Hydraulic Wheel Press Machine
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Shepard-Niles
Model: 142
SERIAL. 142H12, CAPACITY. 300 TONS, RAM DIAMETER. 8", STROKE OF RAM. 30", VERTICAL BETWEEN STRAIN BARS. 48", DISTANCE RAM TO PUSH BLOCK. 30" TO 120" MAX, STRAIN BAR ADJUSTMENT POINTS. YES, RESISTANCE BLOCK HOLE SIZE. 9" OD X 28" WIDE, PUSH BLOCK PLATE ADAPTOR. YES, HYDRAULIC PULL BACK CYLINDERS. YES, 2, PENDANT ...more
15" Industrial Machinery #1516F, drill press, 210-3670 RPM, 10" x10" table
D & D Industries Inc | Monclova, OH
Category: Single Spindle Drill Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: 1516F
1/2 HP, 15" CAPACITY, 210-3670 RPM, 10" X 10" TABLE, 3" QUILL TRAVEL, 27" VERTICAL TRAVEL, 15" LR X 24" FB X 65", 200 LBS.
230 Ton, Cincinnati #230AS-X-14, CNC press brake, 16' overall, 174" between housing, 10" stroke, 8" throat, 26" BG, automatic crowning, foot pedal, 1990
Machnet | Santa Monica, CA
Category: CNC Press Brakes
Seller: Machnet
Location: Santa Monica, CA
Mfr: Cincinnati
Model: 230AS-X-14
Year: 1990
Cincinnati 230AS x 14, Cincinnati 230AS X 14 CNC Press Brake, New: 1990; 2007 CNC Upgrade, s/n 43980, OVERALL BED LENGTH. 192" (16'), DIST. BTWN. HOUSINGS. 174" (14'6"), BENDING CAPACITY. 230 TONS, STROKE. 10", HEIGHT OF DIE RAIL. 4.5", OPEN HEIGHT OVER BED. 19.75", OPEN HEIGHT OVER DIE RAIL. 15.25", CLOSED ...more
6 Ton, Haeger #HP6-C, hydraulic hardware insertion press, 8.5" stroke, 18" throat, AF-MAS vibratory feeder bowl, foot pedal, 1993
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: HP6-C
Year: 1993
6 TON HAEGER HYDRAULIC INSERTION PRESSMODEL HP6-C… S/N 2206… Year 1993 MAXIMUM FORCE. 12,000 LBS. (6 tons)STROKE LENGTH. 0 - 8-1/2"VERTICAL UPSTROKE.″/8" - 8-1/2"THROAT DEPTH. 18"OIL CAPACITY. 18 GALLONSMOTOR. 230 v /″ Ph / 60 Weight: 1,000 lbs.Dimensions:″0" ...more
8 Ton, Haeger #824-1L, hardware insertion press, 24" throat, 8" stroke, bowl feeder, foot pedal, 1997
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: 824-1L
Year: 1997
HAEGER MODEL 824-1H HARDWARE INSERTION PRESSMODEL 824-1L… S/N 08L00505… NEW 1997 Maximum Force. 8 TonsThroat Depth. 24"Throat Height. 15"Stroke Length (Adjustable). 0"- 8"Vertical Upstroke (Adj.). 1/2"- 8"Oil Tank Reservoir. 18 GallonsMotor.″ HP / 220 / 440V ...more
8 Ton, Haeger #824-1H, hardware insertion press, 24" throat, 8" stroke, bowl feeder, foot pedal, 2000
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: 824-1H
Year: 2000
HAEGER MODEL 824-1H HARDWARE INSERTION PRESSMODEL 824… S/N 737… NEW 2000 Maximum Force. 8 TonsThroat Depth. 24"Throat Height. 15"Stroke Length (Adjustable). 0"- 8"Vertical Upstroke (Adj.). 1/2"- 8"Oil Tank Reservoir. 18 GallonsMotor.″ HP / 220 / 440V Approximate ...more
6 Ton, Haeger #HP6-B, hydraulic insertion press, 8.5" stroke, 18" throat, autofeed bowl, 18 gallon hydraulic oil
Generation Machine Tools | Sarasota, FL
Category: Hardware Inserting Presses
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Haeger
Model: HP6-B
HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA #7306, ImperialMetricTonnage 6 T 5.443 t Dimensions 30” x 36” L x 68’’ H 30” x 36” L x 68’’ H Weight 1200 Lbs. 1200 Lbs. HAEGER HP6-B 6 Ton Hydraulic Insertion Press & Autofeed Bowl USA #7306 ...more
800 Ton, Lenmark, custom press, 12" stroke, (2) 20" cylinder diameter
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
SKU: 51437, Condition: Surplus New, Tons: 800 ton, Electrical :, Stroke: 12", Dimensions: 133.00 (H) x 60.00 (W) x 107.00 (L) inches, Additional :, Capacity: 800 Ton, Stroke: 12", Bed Width: 60", Number of Cylinders: 2, Cylinder Diameter: 20", Cylinder Depth: 34.75", Plate Width: 81" ...more
8 Ton, Haeger #824-1H, hardware insertion press, 24" throat, 8" stroke, bowl feeder, foot pedal, 2000
Machinery Values Inc | Harrison, NJ
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: 824-1H
Year: 2000
HAEGER MODEL 824-1H HARDWARE INSERTION PRESSMODEL 824… S/N 727… NEW 2000 Maximum Force. 8 TonsThroat Depth. 24"Throat Height. 15"Stroke Length (Adjustable). 0"- 8"Vertical Upstroke (Adj.). 1/2"- 8"Oil Tank Reservoir. 18 GallonsMotor.″ HP / 220 / 440V Approximate ...more
Insta-Pro #2000, continuous expeller press, oil, vertical screw feed, belt driven drive
Machinery & Equipment Co | Brisbane, CA
Category: Food Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Insta-Pro #2000
Insta-Pro Model 2000 continuous oil press designed for production of vegetable oils from oilseed materials including soybean, canola, and sunflower. Unit utilizes a screw press design to mechanically extract oil while producing a consistent press cake byproduct. a 30 HP main drive and 3 HP feed drive, and featuring a ...more
6 Ton, Haeger #HP6-C, hardware insertion press, 12000 lb force range, 18" throat, 8" stroke, 1997
Great American Eqpt Co | Cincinnati, OH
Category: Hardware Inserting Presses
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Haeger
Model: HP6-C
Year: 1997
6 TON HAEGER HP6-C HARDWARE INSERTION PRESS, Model HP6-C, S/N 1771, New 1997, Stock# Q11777, 12,000 LB Range of Force, 18" Throat, 8" Stroke., CATALOG : Force Range 12,000 LBS Repeatability +/-0% of force set Throat Depth 18" Hydraulic Pump Horsepower 1-1/2 HP Stroke Length 0 - 8-1/2" Vertical Up Stroke 3/8" - 8-1/2" ...more
21" Cincinnati Bickford #21"-Box-Column, super service drill press, 9-3/4" stroke, #65518
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 21-BOX-COLUMN
SERIAL. 1L-3019, MODEL. 21" BOX COLUMN, SPINDLE TO LOWER COLUMN. 11", SPINDLE TO UPPER COLUMN. 10", SPINDLE TO TABLE. 32-1/4" MAX., SPINDLE SPEEDS. (9) 75 TO 1500 RPM, SPINDLE FEEDS.004/.008/.014/.020 IPR, SPINDLE STROKE (POWER). 9-3/4", SPINDLE NOSE DIAMETER. 2-13/16", SPINDLE TAPER. #4 MT, TABLE AREA (T-SLOTTED). ...more
JUST ADDED!
30 Ton, Brown #T-310, vertical trim press, 12.25" x 40" window opening, 13.5" max stroke, variable speed drive
KD Machinery | Scottsdale, AZ
Category: Trimming Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Brown
Model: T-310
Used Brown T-310 Thermo Former for Sale. This pre-owned Brown thermoformer machine is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Brown Thermo Former, please feel free to contact us. You may Activate Pricing to view the price of this ...more
18 Ton, Hydraulic down-acting press, 7" stroke, 16" daylight, 4" bore, 24" x24" bed, #1458
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
24" X 24" BED AREA WITH A 6" WIDE CUT-OUT RUNNING FRONT TO BACK THROUGH THE CENTER OF THE BED. 7.5" X 2.5" X 2.5" STEEL BLOCK ATTACHED TO ROD OF CYLINDER (CAN BE EASILY MODIFIED). APPROX 16" VERTICAL CLEARANCE BETWEEN BED AND CYLINDER. SCHRADER BELLOWS DOUBLE ACTING CYLINDER: 4" BORE; 7" STROKE; 1.75" ROD; 3000 PSI. ...more
30 Ton, Brown #T354V, inline vertical trim press, 13.5" stroke, 20" x 61" platen, 145 SPM
Perry Videx LLC | Hainesport, NJ
Category: Trimming Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Brown
Model: T354V
Pouit svisl lis na oezvn Brown s nosnost 30 tun. Model T-354V, sriov slo 15892, nov z roku 2015. M stl o rozmrech 20" x 61". Udv se, e zvldne maximln velikost plechu a 54". Maximln rychlost a 145 zdvih za minutu, zdvih 4,5" a 13,5". Soust je ovldac panel., 2015 BROWN T354V.
SCM #Action-FL-2500, Semi-Auto Case Clamp, 98.4" width x 49.2" H x 31.5" D capacity, 15 KN press force, 2017
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION FL
Year: 2017
SCM - ACTION FL 2500: Case Clamp (Semiautomatic) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8") Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: ...more
220 Ton, Aida #NC1-2000(2), single crank gap frame press, 9.84" stroke, 17.72"Shut Height, 4.33"adj., 25-50 SPM, air clutch & brake, 2013
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Aida
Model: NC1-2000
Year: 2017
FEED LENGTH 1001 - 1200mm VERTICAL STROKE 0 - 100mm CYCLE TIME (SEC) 1.7 - 2 MAX WORK PIECE WEIGHT 4.0 KG X 2 REPEATIBILIT (mm) +-.03 WORK PIECE PICK UP VACUUM OR MAGNET 2017 YEAR OF MFG MITSUBISHI PLC GX WORKS, GX2 SOFWARE BUILT IN SERVO MOTOR 4' X 3' X 55" TALL APROX. 1000 LBS APROX..
110 Ton, LVD #110BH10, hydraulic press brake, Dynabend 3 CNC Control, 2-Axis, 10' overall, 100" between housing
Cleveland Machinery Sales Inc | Cleveland, OH
Category: CNC Press Brakes
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Lvd
Model: 110BH10
Year: 1982
1982 LVD 110BH10 HYDRAULIC PRESS BRAKE, Tonnage. 110 T, Type. HYD, Overall Length. 10', Between Housings. 8', # Axis. 2, CAPACITY. 110 TON, OVERALL LENGTH OF BED. 120", DISTANCE BETWEEN HOUSING. 100", DEPTH OF THROAT. 8", FLOOR TO TOP OF BED. 36", WIDTH OF BED. 7", DUAL PALM BUTTONS. YES, BACK GAUGE CNC. DRC - ...more
30 Ton, Brown #T-354V, vertical trim press, 54" sheet, 20" x 61" platen, 100 SPM, TCS Control, 2011, #18796A
Arlington Machinery | Lake Zurich, IL
Category: Trimming Presses
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: T-354V
Year: 2011
Used 30 Ton Brown Vertical Trim Press Model T-354V, New In 2011 Tonnage: 30 Ton Platen Size: 20" x 61" Stroke Rating: 100 Stroke/Min Max Sheet Size: 54" TCS Controller S/N: 15576 480/3/60, 183.44 Amps.
50 Ton, Enerpac, hydraulic H-frame press, 14" stroke, 50" DL, Enerpac PH462P pump
C.W. Wood Machinery Inc | Cincinnati, OH
Category: H Frame Hydraulic Press Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Enerpac
ENERPAC H-FRAME HYDRAULIC PRESS, MODEL: PER3042, SERIAL NUMBER: BE2292, Capacity, Center Position: 50 Tons, Capacity, Left and Right Positions: 25 Tons, Stroke: 13", Diameter Of Ram: 3", Width Between Uprights: 28-3/4", Bed Width: 13", Bed Height: 12", Number Of Table Height Adjustments: 6, Vertical Centers Of Bed ...more
Jones, Vertical Screw Press, 6" diameter Liquid discharge, 12" width discharge chute, 10 HP drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Jones vertical screw press, series 100S, stainless steel contacts, complete with 10 HP drive. Previously used at grape juice processing facility, running at a rate of 15 TPH. Includes 6" diameter liquid discharge and 12" wide discharge chute. Serial number P-163., Basis: FOB.
150 Ton, Vertical wheel press, 18 stroke, 40-1/2" between rails, spring ram return, #74885
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Wheel Press Machine
Seller: Yoder Machinery Sales
Location: Holland, OH
Year: 1974
MODEL. 100, CAPACITY. 100 TON, STROKE. 18" MAXIMUM, FACE OF RAM TO RESISTANVE BLOCK. 140" MAXIMUM, HOLE IN RESISTANVE BLOCK. 8", DISTANCE BETWWEN RAILS. 40-1/2", RAM RETURN. SPRING, ADJUSTMENT IN RAIL. (11) @ 12", MOTOR HORSEPOWER. 5.
SCM #Action-FL-2500, semi-auto case clamp, 98.4" W x 49.2" H x 31.5" D, 2017
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-FL-2500
Year: 2017
SCM - ACTION FL 2500: Case Camp (Semi-Automatic) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: ...more
20" Jet #JDP-20MF, single spindle drill press, 10" throat, 1" hole, 4.5" quill, tilting table
D & D Industries Inc | Monclova, OH
Category: Single Spindle Drill Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Jet
Model: JDP-20MF
Z23059A, 1" Diameter Chuck Hole In Spindle, 4.5" Quill Travel, 16" X 13.5" Bed, 9 3/4" X 101/2" Base Table, 22.5" Vertical Height Adjustment, 3 5/8" Column Diameter, 10" Throat, Tilting Table, 1.5HP 115 V, 20" LR X 25" FB X 56" Tall, 250LBS Estimated Weight.
220 Ton, Aida #NC2-2000(2), single crank gap frame press, 9.84" stroke, 17.72"Shut Height, 4.33"adj., 25-50 SPM, air clutch & brake, 2018
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Aida
Model: NC2-2000
Year: 2017
FEED LENGTH 1001 - 1200mm VERTICAL STROKE 0 - 100mm CYCLE TIME (SEC) 1.7 - 2 MAX WORK PIECE WEIGHT 4.0 KG X 2 REPEATIBILIT (mm) +-.03 WORK PIECE PICK UP VACUUM OR MAGNET 2017 YEAR OF MFG MITSUBISHI PLC GX WORKS, GX2 SOFWARE BUILT IN SERVO MOTOR 4' X 3' X 55" TALL APROX. 1000 LBS APROX..
SCM #Action-TF-2500, automatic feed thru case clamp, 98.4" x 49.2" x 31.5" capacity, 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-TF-2500
Year: 2022
SCM - ACTION TF 2500: Case Clamp (Automatic Feed Through) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31.5") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 250 mm (9.8") depth. -- Working table height: 600 mm (23.6"). -- Max. ...more
Hasenclever #WSHK-250, forging press with parts feeder, 245mm stroke, 53 SPM, 15 KW
FH Machinery Inc | Ivyland, PA
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Hasenclever
Model: WSHK-250
Nominal Capacity2" Upsetting Power (MP)250 Gripping Power, Vertical Slide (MP)315 Stroke245 mm Gather140 mm Strokes Per Minute53 Motor15 KW Die Size - Width400 mm (15.75") Die Size - Depth315 mm (12.4") Die Size - Thickness125 mm (5") Overall Dimensions2700 mm x 2200 mm x 2800 mm (106" x 87" x 110"), WITH PARTS FEEDER.
SCM #Action-FL, semi-auto case clamp, 2022
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: ACTION-FL
Year: 2022
SCM - ACTION FL 2500: Case Clamp (Semiautomatic) -- Max. standard working dimensions: 2,500 mm (98.4") Wide x 1,250 mm (49.2") high x 800 mm (31-1/2") depth. -- Min. standard working dimensions: 250 mm (9.8" Wide x 250 mm (9.8") high x 150 mm (5.9") depth. -- Working height: 508 mm (20"). -- Vertical pressing force: ...more
Clausing #2224, drill press
SOMINN Machinery Sales | Dodge Center, MN
Category: Single Spindle Drill Presses
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Clausing
Model: 2224
CLAUSING (USED) MODEL 2224 -, 20" SINGLE-SPINDLE FLOOR DRILL, - ADJUSTABLE TABLE, - ROUND COLUMN DESIGN, - 1/2" JACOBS CHUCK, - STEP PULLEY DESIGN, SPECIFICIATIONS, - 1.25" DRILLING CAPACITY, - 6.5" VERTICAL SPINDLE TRAVEL, - 20" MAXIUMUM DRILL TO CENTER OF CIRCLE, - 22" W X 19.5" L ...more
28" Ibarmia #B-50, drill press, Kentucky gauge automated infeed & outfeed conveyor, 4 HP
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ibarmia
Model: B-50
SERIAL., MODEL. B-50, DEPTH OF THROAT. 14-1/2", DRILLING CAPACITY (MILD STEEL). 2", SPINDLE SPEEDS. (9) 66 TO 1255 RPM, POWER FEEDS. (6).0039 TO.0250 IPR, AREA OF TABLE. 21" X 25", DIAMETER OF SPINDLE. 3-1/2", SPINDLE TRAVEL. 8-5/8", TAPER IN SPINDLE. #4 MT, DISTANCE SPINDLE TO BASE. 47", DISTANCE SPINDLE TO TABLE. 0" ...more
7000 Ton, Schloemann, Stainless Steel oil hydraulic extrusion press line
National Machinery Exchange | Newark, NJ
Category: Extrusion Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schloemann
PRESS LINE COMPONENTS:, HANS HENNING ROTARY BILLET FURNACE, 2800 TON VERTICAL EXPANSION PRESS, (2) IAS (SMS) PREHEAT UNITS, (2) IAS (SMS) INDUCTION HEATING UNITS, 7000 TON SCHLOEMANN EXTRUSION PRESS, PRESS RUNOUT, DIES, CONTAINERS, BACKING ASSEMBLIES, TOOLING, HANS HENNING ROTARY BILLET FURANCE, TYPE - NATURAL GAS ...more
25" Cleereman #25C Box column single spindle drill press, 2-7/8" spindle diameter, #4MT, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cleereman
Model: 25C
SERIAL.25C1515, MODEL. 25C BOX COLUMN, SPINDLE TO UPPER COLUMN. 11-1/2", SPINDLE TO LOWER COLUMN. 12-1/2", SPINDLE TO TABLE, MAXIMUM. 33", WORK TABLE AREA, T-SLOTTED. 18" X 48", SPINDLE DIAMETER. 2-7/8", SPINDLE TRAVEL. 12", SPINDLE SPEEDS. (12) 60 - 1000 RPM, SPINDLE FEEDS. (9).005 -.045 IPR, SPINDLE TAPER. #4 MT ...more
Branson #HH15H, Hot Plate Welder, 12" x15" heat platen, 27" between press platens, 2016
Revelation Machinery | Chicago, IL
Category: Hot Plate Plastic Welding Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Branson
Model: HH15H
Year: 2016
Make: Branson, Model: HH15H, Year: 2016, Machine Location: Upon Request, Previously used for Pickleballs, -Heat Platen Size: 15″ x 12″, -Max Distance Between Press Platens: 27″, -Max Vertical Press Stroke: 16″, -Max Heat Platen Stroke (In and Out): 14″, -Max Heat Platen Stroke (Up and ...more
Jones #P-225, Vertical Screw Press, 20 HP main drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-225
Jones vertical screw press, model P-225, type 2512, with all wetted parts being stainless steel. Unit 20 HP main drive thru gearbox, frac HP, drive on the shaker discharge assembly and air cylinder to operate the solids discharge cone. Include main screens, backup screens, reinforced poly outer doors / covers and ...more
35 Ton, Premier #535-2, CNC Hydraulic Press, 5' overall, 42" between housing, 5' x 11 gauge Bending Capacity, 1997
AM Metalmaq Inc | Hialeah, FL
Category: CNC Press Brakes
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Premier
Model: 535-2
Year: 1997
Model number 535-2, Year of manufacture 1997, Capacity 35 tons, Length of bed and ram, overall 60", Distance between housing, actual 42", Bending capacity 5' x 11 ga., Ram stroke 5", Ram open height 11-1/2", Depth of throat 5", Ram approach speed 206 IPM, Ram slow speed 24 IMP, Ram return speed 262 IPM, Motor 5 ...more
50 Ton, Enerpac, hydraulic H-frame press, 6" stroke, 28.75" btwn side frames, 13" x12" table
N S Machine Corp. | Granger, IA
Category: H Frame Hydraulic Press Machines
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Enerpac
, Manufacturer: Enerpac, Stock Number: 13635, s:, Enerpac Pump Model PER3042 (Serial #CB3109), Enerpac HydraLift Table Lift (IPL-100), Tonnage, head at center - 50, Tonnage, head at left or right - 25, Stroke of cylinder rod - 6” (approximately), Diameter of cylinder rod - 3”, Distance between side frames ...more
JUST ADDED!
Hugh Smith, Shipyard Vessel with vertical Plate Roll Bender, 3000 Ton, 13' width, 7.87" Thickness, 37.8" Main Roll
Revolution Machine Tools Inc | North Salt Lake, UT
Seller: Revolution Machine Tools Inc
Location: North Salt Lake, UT
The Hugh Smith Vertical Plate Bending Machine is designed for forming cylinders of various diameters, making it ideal for producing pressure vessels, boilers, nuclear plant components, and legs or piles for oil platforms and modular structures., 3,000 Ton, handling plate width 13′ and thicknesses up to ...more
JUST ADDED!
20" Rockwell Delta #70-6X0, Drill Press, 18" x 16" Tilting Table, 375-3750 RPM, #3 MT, 10" Throat
Vander Ziel Machinery Sales | Alto, MI
Category: Single Spindle Drill Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Rockwell Delta
Model: 70-6X0
Rockwell Delta 20" Drill Press, Model 70-6X0, Serial # 1757244, Asset # 16082, Drilling Capacity, In Mild Steel: 1" Diameter, Quill Taper: #3 MT, Stroke of Quill: 6", Spindle Speeds, Variable: 375 - 3750 RPM, Throat Depth: 10", Tilting Work Table Size: 18" x 16", Table Tilts: +/- 90 Deg. ...more
30 Ton, Brown #T-345V, High Speed Vertical Trim Press, 145 SPM, 53" width, 30 HP, Panelview+ Control, w/ 2 plate carts, 2021
Arlington Machinery | Lake Zurich, IL
Category: Trimming Presses
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: T-345V
Year: 2021
Used Brown Machine Model T-345V V-Series High Speed Vertical Trim Press S/N 16347 New In 2021 30 Ton 16,711 Hours Max Die Size 57" x 30", Up to 145 Strokes Per Minute 53" Maximum Sheet Width Brown Controls, Allen Bradley Panelview Plus Digital Display 30 HP SEW AC Motor Driven By Allen-Bradley Powerflex 755 Drive ...more
2" Nider #N1-50B, geared head drill press, 5-1/4" travel of spindle, #4MT
D & D Industries Inc | Monclova, OH
Category: Single Spindle Drill Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: N1-50B
MODEL: N1-50B SERIAL NO.: N/A Maximum Drilling Diameter 2” STEEL Maximum Travel of Spindle 5 1/4″ Taper of Spindle Hole Morse # 4 Distance – Center of Spindle to Vertical Column 12 5/8″ Spindle nose to table surface 33 1/4” max. Spindle nose to base plate surface 47″ max. Dimension ...more
Knuth #KSB-25A, Box Column Drill Press
Blumberg Machinery Co | Bannockburn, IL
Category: Single Spindle Drill Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: KSB-25A
Working AreaDrilling capacity 0.98 in Table set up area 16x22 in T-slots, width 0.6 in Number of T-slots 3 positions Quill stroke 8 in Table stroke 12 in Feed Z-axis (9) 0.0022 - 0.0709 in/R Feed force, axial (max.) 9 Spindle nose-to-table distance (max.) 29 in Throat 11 in Vertical head travel 8 in HeadstockSpindle ...more
Knuth #KSB-Series, Box Column Drill Press, new
Blumberg Machinery Co | Bannockburn, IL
Category: Single Spindle Drill Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: KSB-SERIES
KSB 32AKSB 40BKSB 50CKSB 63B Working Area Drilling capacity 1.26 in 1.57 in 1.97 in 2.48 in Feed force, axial (max.) 9 16 16 30 Throat 11 in 13 in 13 in 15 in Vertical head travel 8 in 8 in 8 in 10 in Quill stroke 8 in 10 in 10 in 10 in Feed Z-axis (9) 0.0022 - 0.0709 in/R (9) 0.0022 - 0.0709 in/R (9) 0.0022 - 0.0709 ...more
12-5/8" Nider #N1-50B, geared head drill press, 2" drill diameter, 5-1/4 spindle travel, #4MT
Westway Machinery Ltd | Mississauga, ON
Category: Single Spindle Drill Presses
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: N1-50B
, ½” Chuck (1/16” – ½”), MODEL: N1-50B, SERIAL NO.: N/A, Maximum Drilling Diameter 2” STEEL, Maximum Travel of Spindle 5 1/4″, Taper of Spindle Hole Morse # 4, Distance – Center of Spindle to Vertical Column 12 5/8″, Spindle nose to table surface 33 ...more
21" Cincinnati #Bickford-21" 1L, Drill Press, 10-1/2" throat, 3000 RPM, 12" x18" x10" trvls, 3 HP,
Norman Machine Tool Ltd | Baltimore, MD
Category: Single Spindle Drill Presses
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Cincinnati
Model: BICKFORD-211L
Cincinnati Bickford 21″ Drill Press, Inventory # 9999, Model: 21″ 1L, S/N: 1L2901, Depth of Throat: 10 1/2″, Diameter of Swing Away Table: 19″, Spindle Speeds: (9) 150 – 3,000 RPM, Spindle Feeds:.004,.008,.014,.020 IPR, Spindle Travel: 10″, Spindle Taper: #4 MT, Diameter of Spindle: ...more
jones beloit #2510 pressmaster vertical, S/N P-141
Genemco | Hearne, TX
Category: Juice Presses
Seller: Genemco
Location: Hearne, TX
Mfr: Jones
Model: 2510
Jones Beloit Pressmaster Vertical Juice Press. Model 2510. S/N P-141. With a 304 stainless steel construction, this press has (1) 16 in. dia. top inlet with a 20 in. dia. flange and (12) attachment holes for raw product introduction. Product press 21 in. dia. x 47-1/2 in. H. 15-3/4 in. dia. slicing blades. Press ...more
Knuth #TSB, Bench Type Drill Press
Blumberg Machinery Co | Bannockburn, IL
Category: Single Spindle Drill Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: TSB
TSB 25TSB 35 Working Area Drilling capacity 0.98 in 1.38 in Tapping capacity, steel M 16 M 22 Foot set up area (length x width) 12x13 in 15x14 in Vertical head travel 19 in 20 in Spindle nose-to-foot distance 26 in 25 in Throat 9 in 13 in Column diameter 4 in 5 in Headstock Spindle speed (6) 125 - 2,825 rpm (12) 125 - ...more
JUST ADDED!
130 Ton, Amada #HDS-1303NT, CNC hydraulic press brake, with back gauge, 10.6'OA, 106.3" between housing, 2011
Machinery Network Inc | Encino, CA
Category: CNC Press Brakes
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Amada
Model: HDS-1303NT
Year: 2011
Maximum bending length: 126.77, Tonnage capacity: 143 US tons, Stroke length: 7.87, Approach speed of upper beam: 7.87 IPS, Bending speed of upper beam: 0.79 IPS, Return speed of upper beam: 7.87 IPS, Number of main cylinders: 2, Hydraulic pump motor output: 5.2 x 2.7 HP, Hydraulic unit tank capacity: 17.8 Gal. ...more
26" Donau (Sheldon) #SDR23, drill press, 6" column, 5" stroke, MT3
Vander Ziel Machinery Sales | Alto, MI
Category: Single Spindle Drill Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Donau
Model: SDR23
Donau (Sheldon) 26" Drill Press, Model SDR23, Asset # 17041, Drill Capacity, Steel C.I.,.003 1-1/8" 1-1/4",.006 7/8" 1",.012 3/4" 7/8", Tapping Capacity 7/8" 1-1/8", Morse taper of drilling spindle MT3, Diameter of column 6", Table dimensions 19-3/4"x47-1/2" ...more
7 Stand, Yoder #M1.5, Roll Forming Line, 1.5" arbor, 12" roll space, 11" horizontal center, 7" vertical center
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Yoder
Model: M1.5
7 STAND YODER M1.5 ROLL FORMING LINE, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY, CONSISTING OF:, 2500 LBS LITTEL UNCOILER, CAPACITY - 2500 LBS, WIDTH - 12", ID RANGE - 16"-20", 32 TON MINSTER #4 OBI PRE-PUNCH PRESS, MODEL NUMBER - 4, TONNAGE - 32, STROKE - 4", SLIDE ADJUSTMENT - 2", AIR CLUTCH, FLYWHEEL, 7 STAND ...more
7 Stand, Custom, rollformer with inline punch press, 2" arbor, 8.5" roll space, 1.5 HP
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Custom
7 STAND CUSTOM ROLL FORMER W/ INLINE PUNCH PRESS, MANUFACTURER - CUSTOM, ROLL SPACE - 8.5", ARBOR - 2", HORIZONTAL CENTERS 11", VERTICAL CENTERS - 3" - 6", MOTOR - 1.5 HP DAYTON MOTOR, 230 VAC, 3 PH, 60 HZ, 1725 RPM, INCLUDES:, INLINE PUNCH PRESS, w/ 2 HP 220/440 VAC, 3 PH, 60 HZ, 750 RPM, DIMENSIONS, 11' 4" L x ...more
19 Stand, Ardcor Tooled Decking Line, 2.25" arbor, 42" roll space, 16" horizontal center, 10" vertical center
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ardcor
19 STAND ARDCOR TOOLED DECKING LINE, 42" RS, 2.25" ARBOR, CONSISTING OF:, L-TYPE COIL CAR, 48" X 20,000# UNCOILER, 16"-20" ID, HYDRAULIC WEDGE EXPANSION & OVERARM, ARDCOR ROLL FORMER, ENTRY STRIP GUIDE, # OF STANDS - 19, SHAFT DIAMETER - 2.25", ROLL SPACE - 42", VERT. SHAFT CENTERS - 5" TO 10", HORIZ. SHAFT ...more
Wittmann, W673, robot, 1000-3000 Ton, 3 axis, 19.7' trav stroke, 9.9' vertical stroke, 6.6' kick stroke, 480 V., 2006
Arlington Machinery | Lake Zurich, IL
Category: Industrial Robots
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wittmann
Model: W673
Year: 2006
Used 3 Axis Wittmann Robot Model W673, New In 2006 Traverse Stroke: 6000 mm Vertical Stroke: 3000 mm Kick Stroke: 2000 mm Payload: 220 LBS Voltage: 480V Press Range: 1000-3000 Ton Does Not Include Rigging Or Loading Guarding Shown In Photos Is Not Included.
10 Stand, Tishken #10-4-1-1, rollformer w/punch press & cut-off press, 1" x 3.5"
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 10-4-1-1
UTUBE NUMBER: 2760, MANUFACTURER: TISHKEN, MODEL NUMBER: 10 4 1 1, SERIAL NUMBER: 540 640, Number of Passes: 10, Line Direction: Right to Left, Spindle Diameter: 1″, Roll Space: 3-1/2″, Horizontal Center: 4-1/2″, Vertical Adjustment: 2-3/4″ – 3-3/4″, Base Top to Center Lower ...more
12 Stand, American Steeline, rollformer, Airam cutoff press, 6000 lb.decoiler, tooling
N S Machine Corp. | Granger, IA
Category: Rollformers
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: American
, Manufacturer: American Steeline, Airam, Size / Capacity: 12 stand, Stock Number: 13595, s:, 10,000 lb American Steelline decoiler, 12-stand rollformer, Airam cutoff press, Tooling, Decoiler - American Steel Line,. Model - 1000,. Serial - 6024,. Maximum coil weight - 6,000 lbs.,. Maximum coil width - 28",. Maximum ...more
Insta-Pro #2000, continuous expeller press, oil, 7.2:1 ratio, vertical screw feed, belt driven drive
Aaron Equipment Co | Schaumburg, IL
Category: Food Extruders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Insta-Pro
Model: 2000
used insta-pro model 2000 continuous expeller press-used. 7.2:1 cage-length-to-cage-diameter ratio, a vertical screw feed. designed for mechanical oil extraction from oil seeds such as soybeans, canola, and sunflower seeds. this unit includes a belt-driven drive.
Fishmeal Plant, 10 metric tons/hr material intake, Atlas vertical cooker, Atlas disc dryer & screw pass, 3-effect evaporator, cooling towers
Aaron Equipment Co | Schaumburg, IL
Category: Complete Food Processing Plants
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- fishmeal plant, 10 mt/hour raw material intake consisting of: infeed mill breaker, atlas vertical cooker, atlas screw press, atlas disc dryer, alfa laval decanter, flottweg tricanter, 3 effect evaporator, cooling towers, morisa boilers, conveying, controls and additional infrastructure. our freight specialists ...more
Weinig #BF600, batch finger jointer, horizontal & vertical, 20' press, 440 V.
RT Machine | Hughesville, PA
Category: Woodworking Jointers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Model: BF600
Weinig Model BF600 Batch Finger Jointer Horizontal and Vertical Finger Joints 20ft Press 1010 Heads APQUIP Glue System Updated Electrical System Approx. Material Capacity: Block Length: 6"-40" (150-1000mm) Block Width: 2"-8" (50-205mm) Block Thickness: 0.75"-2" (19-50mm Press Length: 9'10" - 19'8" ...more
Bollegraaf #HBC110, 72" horizontal automatic tie baler, 1600 x 1100mm hopper, 1993
Alan Ross Machinery Corp | Zion, IL
Category: Horizontal Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bollegraaf
Model: HBC110
Year: 1993
1100mm x 1100mm x Variable Length Approx Bale Size, Approximately 47 Tons/Hour Factory Stated Capacity, 1600mm x 1100mm Hopper Size, 55 Ton Pre-press Flap Force, 100 Ton Press Force, 100HP Electric Main Motor / 3HP Wire Tie Motor, Fully Automatic Twistomat Knotter System; 5 Wires Vertically, New 1993 : Approximately ...more
10 Stand, Foshan #DH100, rollformer with pre-punches, 2" dis shafts, 9" roll space, 7.3 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Foshan
Model: DH100
SERIAL. 201705, MODEL. DH100, YEAR NEW. 2017, NUMBER OF STANDS. 10, DIAMETER OF SHAFTS. 2", ROLL SPACE. 9", HORIZONTAL CENTERS. 7.5"", BASE TO CENTER OF LOWER SHAFT. 8", VERTICAL ROLL ADJUSTMENT. 1", SPEED VARIABLE. MITSUBISHI, FORWARD AND REVERSING. YES, NUMBER OF 4 POST PRESS PUNCHES. 2, NUMBER OF 4 POST CUTOFF ...more
16 Stand, Bradbury & Tishken, 18 rafted rollform line, 1.5" shafts, 18" roll space, 4"-5.5" vertical, 1991
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Bradbury & Tishken
Year: 1991
BRADBURY RAFTED ROLLFORM LINE, S/N: 23891 NEW 1991, 16 STAND, SHAFTS 1.5", 18" ROLL SPACE, 4" TO 5.5" VERTICAL, GEAR BOX FOR EACH SET OF 8 STANDS, CHAIN DRIVE, 7.5 HP 220/440 VOLT, BRADBURY PALLET UNCOLIER 2500 LB, JOHNSON 16 TON PRE-PUNCH PRESS S/N 85003, BRADBURY 4 POST 15 TON CUT-OFF, STROKE 2" WITH DIE ...more
19 Stand, Michigan Rollform #15GMHU-20-L, rollforming line, 20" x 1.5", 3 coil keepers, maual mandrel expansion
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Michigan
Model: 15GMHU-20-L
19 Stands 20.00" x 1.50" Michigan Rollform Rollforming Line, Model Number: 15GMHU-20-L, Rollformer was Rebuilt by MRF in 2023., Line was only run for 2 months after rebuild., Consisting of the following:, -Uncoiler: New in 2023, 6,000# x 16" Wide Capacity, Non-Powered Pulloff Style Payoff Reel, Manual Mandrel ...more
