Buy or Sell Your Vertical Press

(1) Used Van Norman Model 36 Universal Milling Machine; S/N 6085, Table Size.12" x 60", Table Travels:, Longitudinal (X).11", Cross Travel (Y).40", Vertical Travel (Z).19-1/2", Spindle Size., Speed., Motor., Electrical Characteristics., Overall Dimensions., Weight., F.O.B.Casa Grande, AZ.

MODEL: V - 36, 36" THROAT, 30-1/2" x 30" TILTING TABLE, BLADE WELDER, 12" VERTICAL CLEARANCE, 50 - 160 R.P.M., WORK LIGHT, APPROXIMATE DIMENSIONS: 6' LR x 55" FB x 82" TALL, APPROXIMATE WEIGHT: 2,000 LB, GOOD CONDITION.

Used Nazel Model 4B Forging Hammer, 2T, rebuilt in 2020 with new valves, leather wipers, wrist pin, bearings, and oilers. s include 4011 psi capacity, 15 HP motor, and foot treadle operation. Weighing in at 11,000 lbs, its ram control is precise., Capacity: 4011# per square inch, 15 HP Motor, Foot treadle operation ...more

Contech Converting Technologies, Inc. 3662 Web Press Paper Film Equipment., This is an automatic die cutting press so you can cut shapes out of paperboard, non-wovens,vinyl's, laminates, poly films and others materials., The Contech has a 4 roll unwind station so you can have 4 layers to cut through. Create a ...more

Tonnage 600, Stroke 12 inches, Shut Height 44 inches, Adjustment 16 inches, Bed Size 96 x 60, Ram Area 96 x 60, SPM 20-40 VSPM, Standard, 600 ton Niagara Mechanical Metal Stamping Press, Model SC2-600-96-60, Straight Side Mechanical Progressive Die Press, 600 ton Press Capacity, 12" Stroke, 44" Shut Height, 16" ...more

Turnkey juicing line originally used for blueberry juice production and adaptable for strawberries, other soft fruits, or wine. System begins with stainless steel receiving and tilt tables feeding into a Rietz Therma screw auger conveyor with an air-blower wash line that includes a magnetic trap. Juice separation and ...more

This listing is for a NEW DME 6032GL., Straight Leader Pin, typically used in mold base alignment and die sets., Precision-ground and hardened for industrial applications., See photos for., Part No: 6032GL, Type: Inch Straight Leader Pin, Condition: NEW, Diameter: 3.000", Length: 18.750", Press Fit Length: 2.875" ...more

Schuetz Tool Bladder Press, for veneer laminating (not thermofoil).: -- (2) Shuttle tables, approx. 55"; x 106"; press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200F. Can use PVA which would extend cycle time to approx. ...more

Betenbender 6′ x 50 Ton Hydraulic Press Brake, Inventory # 10069, Model: 6′ x 50 Ton, S/N: 43293, Made in USA, Width of Bed: 2″, Width of Upper Machined Ram: 1 3/4″, Throat Depth: 8″, Open Height: 12″, Closed Height: 6″, Height of Bed: 28″, Distance Between Housings: 54 ...more

used quincy air treatment unit - mist eliminator. industrial compressed-air vessel, identified as unit 3, is a vertical steel separator/filter housing designed for inline air-treatment service within a multi-compressor system. the unit s a bolted top cover with multiple service ports, heavy-duty welded legs, and ...more

SERIAL #55-315. 22" DIAMETER MAIN RAM WITH A 21.25" DIAMETER ROD AND APPROX 24" STROKE. THERE IS AN OPTIONAL "PIERCE" CYLINDER IN THE CENTER OF THE MAIN RAM THAT IS 10" BORE WITH AN 8.75" DIAMETER ROD WITH APPROX 3" TO 6" STROKE RATED TO 100 TONS. 36" X 36" NOMINAL BED SIZE (6" DIAMETER HOLE IN CENTER OF BED). MAX ...more

IBERPRESSE PRA-1-1423 Veneer Membrane press Platen dimensions of 55" x 90" (1,400 x 2,300 mm); bottom platen, same size top platen with a 47" x 82" (1,200 x 2,100 mm) reset for membrane. -- Infeed: Right-to-left through feed, flat power (indexed for charging a load) conveyor, 96" L x 55" W. -- Outfeed: Gravity roller ...more

Used 1995 MULTIPRESS FH-20, 20 Ton Hydraulic C-Frame Press. s a 4-post guided ram, 32"x18" bed, 12" stroke, and 25" daylight opening. Powered by 20 HP motor. Measures 30"x16" post space, 3,200 lbs. Excellent for heavy-duty tasks., Hydraulic Press, 4 Post, 20 Ton, 32 x 18 Bolster size, 30 x 16 Post space, 12 Stroke, 25 ...more

Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBR 1030Condition:New - In-StockYear:2025Stock #:1913Status:For SaleCountry:United States, Bending Tons 110, Bending Capacity (Mild Steel) 10′, Table Size 7" x 10′, Clear Pass. 100", Ram Strokes 6", Open Height 13", Closed ...more

Aida 330 Ton SSDC PRESS, STOCK# 14010J, Model PMX-L2-300(1)., S/N 12903-0665., Link Drive., 5.90" Stroke., 3.93" Power Ram Adjustment., 18.50" Shut height over bolster., 50-120 SPM., 72.84" x 34.65" Ram., 73.84" x 39.37" Bed., 36.5" Windows., Floor Standing., Air Clutch and Brake., Air Counterbalances., Hydraulic ...more

Scotchman 110 Ton Hydraulic Wide H-Frame Press, Model ProPress 110W, SKU # 3014002, Capacity 100 Tons, Motor 3 HP, RPM 3000, Ram Speed – Approach 17 ipm, Ram Speed – Press 5 ipm, Ram Speed – Return 21 ipm, Open Height, Minimum 5”, Open Height, Maximum 34 3/4”, Stroke 15”, Lateral ...more

Pre Owned 1995 Pullmax Optima 320 CNC Hydraulic Press Brake, Serial Number: Capacity 350 Tons, Overall Length of Bed & Ram 145”, Distance Between Housings 124”, Open Height 22”, Stroke 11”, Shut Height (SDAU) 11”, Throat 10”, Working Height 39”, Bed Width 11.89”, Oil ...more

75 TON DAKE "5-075" ELEC-DRAULIC H-FRAME TRAVELING COLUMN HYDRAULIC STRAIGHTENING PRESS - 31" X 30' (360) Work-Table w/Supports, 75 TON DAKE ELEC-DRAULIC H-FRAME TRAVELING-COLUMN HYDRAULIC, STRAIGHTENING PRESS, Model 5-075, Power Column Traverse, 2 HP Elec-Draulic Moveable Workhead, Variable Ram Speed, (3) ...more

Cincinnati Model 550-20 Vercipower Vertical Mill, 94 1/2" x 20", Asset #11370, Serial # 311053V5V-9, Working Surface 94 1/2" x 20", T-Slots (3) 3 13/16", Distance between Slots 4.25", Longitudinal Range 50", Cross Range 18", Vertical Range 24", Spindle Taper 50 Taper ...more

35 TON STAMTEC SINGLE CRANK GAP FRAME PRESS, Model G1-35, S/N 9730-S70654, New 1998, Stock# Q11680, Stamtec Press Control, LINK System 1100 Tonnage Monitor, Dual Palm Buttons, Inch / Single / Continuous Modes, Hydraulic Overload., CATALOG :Tonnage Capacity 35 Ton Stroke Length 2.76" Adjustment 2.17" Shut Height 8.66" ...more

Do-All 36" Vertical Bandsaw, Model V-36, S/N 300-94803, - Throat capacity: 36", - Table size: 30-1/2" x 30-1/2", - Blade speeds: 50-1600 FPM, - Blade length: approx. 199", - Blade width capacity: 1/8" - 1", - Vertical clearance: 12", - Main motor: 2 HP, - Blade welder, - Tilt table.

“This gorgeously equipped Swedish milling machine appears to have little use or wear, as it came from a Canadian federal training facility! The joystick handle on the lower left side of the knee is no longer in its protective rubber bellows. We feel the tables and slideways, bed etc. are in good condition and no ...more

Model: 22-42, Serial Number: 11739, 42" Diameter Chuck, 40 HP Motor, 24" Vertical Travel, 48" Swing, Neutrifier Magnetic Chuck Controls, Wet Base Machine with Coolant Pump.

Maker: Blanchard, Model: 22-42, Serial Number: 11901, 42" Diameter Chuck, 40 HP Motor, 24" Vertical Travel, 48" Swing, Neutrifier Magnetic Chuck Control, Wet Base Machine with Coolant Pump.

68 Ton Beckwood 4-Post Hydraulic Press, Model #4P68F42P3640, Serial #26871, Age 2000, Down acting, 68 Ton forming capacity, 42 Ton punching capacity, Stroke 0" - 14", Daylight 22" to bed, Bed & slide 36" x 40", T-slotted, Fast approach 446 IPM, Pressing 20-72 IPM, Return 500 IPM, 20 HP motor & controls, 15 GPM ...more

Model: Beckwood LSP-250-6464 - Servo Roller Screw Press, Linear Servo Press’s Nitches:, - Off center loading, - Draw and Punching Work with Nitrogen Die Systems, - Heated Platen Applications, - Precision Forming, - High Cleanliness Requirements, Capacity: 13 to 250 Tons, Stripping Capacity: 187 Tons, Day Light: ...more

Make: Freeman Schwabe, Model: SEP30, Year: 2025, Machine Location: Upon Request, The Freeman Schwabe SEP30 servo electric die cutting press is a high-precision, clean-room-capable system designed for kiss-cutting, through-cutting, and laminating applications. Featuring advanced servo-driven control with programmable ...more

MULTIPRESS GAP FRAME HYDRAULIC PRESS, MODEL: FQ-75-30H, SERIAL NUMBER: 30429, Capacity: 75 Tons, Stroke: 15", Daylight: 30", Throat: 13", Bed Size:, Bed Height: 32", Piston Diameter: 7", Rod Diameter: 5", Ram Speed, Closing: 232 IPM, Ram Speed, Pressing: 114 IPM, Ram Speed, Return: 242 IPM, Maximum Operating Pressure: ...more

SAW ----------------------- VERTICAL/HIGH SPEED/HEAVY DUTY PRODUCTION BAND SAW, SAW CAPACITY -------------- 20" HORIZONTAL, 25" VERTICAL @ 90°, 20" HORIZONTAL, 18" VERTICAL @ 45°, BLADE SIZE ---------------- 1 1/2" X 18' 6" X.050" THICK, MAIN MOTOR ---------------- 7.5 HP, APPROX. WEIGHT ------------ 6,000 ...more

Z23041B, 4 Post Style, 24" Stroke, 32" Daylight, 30" X 48" Ram, 30" X 48" Bed, 120 Gallon Reservoir, 36" X 19" Between Posts, 8" Diameter Cylinder, Palm Buttons, Allen Bradley Panelview 600 Control, 15 HP 230/460/3/60, 78" LR X 70" FB X 128" Tall Press, 78" X 48" X 109" Tall Hyd Unit, 13500 Estimated Weight.

Used 3,000 liter ConeCraft bulk hold tote for use with one-time-use bags, vertical orientation, stainless steel construction.

2011 Baykal APHS 4116 x 440 Hydraulic Press Brake, 480 Ton, 13'5" Bed Length. s 140" between housings, 12.6" stroke, and 23.2" daylight opening. a 40 HP motor, overall dimensions 200"x90"x138". Weight approx. 60,000 lbs., MODEL: APHS 4116×440, CAPACITY: 13 5 X 480 TON, SERIAL NO.: 17729, OVERALL BENDING ...more

SERIAL. 4118, MODEL. MH-3V, TABLE SIZE. 65" x 14 1/4", LONGITUDINAL TRAVEL. 36-1/4", SADDLE CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 19 TO 1900 RPM (24), TABLE FEEDS. (12) 1/2 TO 86 1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34 1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" ...more

(PICTURE IS A SISTER PHOTO), - 100 U.S. TONS, - 3.00" STROKE, - 4.00" SLIDE ADJUST, - SHUT HEIGHT SDAU TO BE 17.5", - 48.00 x 18.50 SLIDE AREA, - 48.00 x 31.00 BED/BOLSTER AREA, - 0 150 SPM 15 HP, 1800 RPM EDDY CURRENT, - 220/480VAC/60Hz/3ph, - 26,600 lbs. APPROX WEIGHT, - PNEUMATIC COUNTERBALANCES, - MINSTER LUBE ...more

SERIAL. 32-9830, MODEL. 307-S-12, AREA OF TABLE. 62-1/2" X 12", SPINDLE SPEEDS. (24) 25 TO 2000 RPM, LONGITUDINAL AND CROSS FEEDS. (16) 1/4 TO 32 IPM, VERTICAL FEEDS. (16) 1/8 TO 16 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 18", TAPER IN SPINDLE. #50 NS, TOP OF TABLE TO CENTER OF ...more

SERIAL.: 527, MODEL.: 918-527, TONNAGE.: 100, STROKE.: 42", OPEN-HEIGHT.: 60", CLOSED HEIGHT.: 18", PRESSING SPEED:, APPROACH.: 85 I.P.M, PRESSING.: 0 TO 17 I.P.M, BREAKAWAY.: 0 TO 38 I.P.M, RAPID RETURN.: 194 I.P.M, BED SIZE.: 84" X 48", BETWEEN POST.: 60" X 60", ROLLING BOLSTER. DOES NOT NEED HOOKED UP TO RUN ...more

Tonnage Capacity: 400 TonPull Up Capacity: 30 TonStroke: 19.7"Daylight: 50"Max. Total Die Weight: 4.8 TonMax. Upper Die Weight: 1.5 TonApproach Speed: 425 IPMPressing Speed - Under 320 Tons: 23.6 IPMPressing Speed - Over 321 Tons: 9 IPMReturn Speed (Fast / Slow): 330 IPM / 141 IPMBolster Area (L-R x F-B): 66.9" x ...more

JLG CM-1432 ELECTRIC SCISSOR LIFT WITH 14' MAX VERTICAL REACH, 500 LBS. CAPACITY, 24 VOLT BATTERY WITH ON-BOARD CHARGER, S/N C019024-C200018610.