Buy or Sell Your Plastic Molders

This listing is for a USED TENSITRON TR-4000HC. It is designed for measuring tension in fine wire, filaments, and flat materials. This unit is categorized as a mechanical tension meter and includes the following capabilities: 504000g tension range, 8% full scale accuracy, and magnetic dampening with V-groove rollers ...more

Make: Napasol, Model: Steam Pasteurization System, Year: 2015, Machine Location: Upon Request, MODEL / YEAR: NAPASOL STEAM PASTEURIZATION SYSTEM, 2015, TYPE: BATCH STEAM/VACUUM AUTOCLAVE PASTEURIZER FOR LOW-MOISTURE PRODUCTS, CAPACITY: 6-BIN LOAD (SUPPORTS APPROX. 15,600 LB/HR DEPENDING ON PRODUCT TYPE AND DENSITY) ...more

Rotary outserter, manufactured by MGS, Model number RPP-221, previously used to place literature on outside of cartons. Includes 4' infeed conveyor, glue applicator with Nordson 3100 hot melt glue system, plows & guides mechanism to orient cartons, outsert scanner, dual air cylinder metering device, vari-speed ...more

1.2 CYD CAPACITY, CATERPILLAR 1.2 CYD PURPOSE BUCKET, CATERPILLAR PART NUMBER 284-9279, FITS UNIVERSAL SKID STEER LOADER INTERFACE, INCLUDES BOLT ON CUTTING EDGE, SOLD AS IS.

Delta RC-63N 24" PLANER WITH SPIRAL CUTTER HEAD -- 24" x 9" Cap., 5/16" max. material removal, -- 10-1/2" min. part length. -- 15 HP Belt drive motor, -- Spiral Cutting Head -- 5,000 RPM, variable feed speed from 20 - 60 FPM. & s -- Powered raise and lower of 25" x 35" table, -- Sectional chipbreakers, sectional ...more

The Haitian Zhafir VE 3000/1400 is a used injection molding machine from 2010 with a robust clamping force of 337 tons. Featuring a B-Screw, it offers a maximum shot size of 23.56 ounces for precision plastic molding applications. The machine accommodates various production needs with a screw diameter of 60mm and ...more

Make: Arburg, Model: 720S-3200-1300, Year: 2004, Machine Location: New York, Tonnage: 359 Ton, Shot Size: 18 Oz, Screw Diameter: 55 Mm, Platen Dimensions: 40.9″ X 40.9″, Tie Bar Spacing: 28.3″ X 28.3″, Clamp Stroke: 23.6″, Min Mold Height: 11.8″, Max Mold Height: 31.5″ ...more

230 tons x 12 ft. overall, 126’’ between housings230/460, 3 ph15h.p motorWeight 29,500 lbsOptions or Upgrades, Automec CNC 9X9 backgauge10″ Stroke8″ Throat7″ Shut HeightRemachined RamDie holder included- tooling ready.

Make: PBT, Model: PBT25 PC400, Year: 2021, Machine Location: Upon Request, Capacity (Force): 59,525lbs, Max Profile Height: 11.8″, Measuring Inaccuracy: ±1.2 dBA, Rollers: 3, Speed: 1-22RPM, Max Torque: 1,180ft/lbs, Adjustable Front Roller Spacing: 7.9″ – 39.4″, Tool Holding Fixture ...more

MARMO MECCANICA LCV 711 M Vertical Inline Multi-head Automatic Flat Edge Polisher: -- For granite, marble, & quartz. -- Thickness cap. 1 - 6 cm (0.40"; - 2.36";). -- Min. material size 80 mm x 270 mm (3.15"; - 10.63";). -- Max. abrasive size 150 mm (6"). -- Working speeds 80 - 100 linear feet/hour. -- ...more

This listing is for a USED FANUC A05B-2601-C010 Operator Panel., Industrial 2-mode operator panel used in FANUC robotic systems. Designed for reliable control and monitoring of automation equipment. Ideal for integration into CNC or robotic work cells. It is designed for machine and system control interfacing in FANUC ...more

Inventory No. 0721-152-0007 Manufacturer Metolift Model No. M5624-41 Name Hoist Arrival Date 07-21-2021 Dimensions L x W x H (inches) Unavailable Capacity 750 KG Weight (lb.) 1 Category Material Handling Condition Used Available Quantity 1 Serial No. 8025 Item Stainless Steel Product Contact Surfaces, With Gaylord ...more

Just like with Automatic Booths, there are Quick Color Change Systems available for Manual Powder Application too. Box Feed powder guns make color changing very quick, but a Box Feeder doesnt always fluidize well in humid environments and they dont work with all powders (specifically metallics). A Quick Color Change ...more

SERIAL. 112, MODEL. HP751, YEAR NEW. 1978, CAPACITY. 2-19/32" TO 4-3/4", CAPACITY WITH AUXILLARY HOLDERS. 1-21/32" TO 2-17/32", MAXIMUM TAPERED THREAD LENGTH. 5", CARRIAGE TRAVEL. 19", SPINDLE SPEEDS. (8) 18.8 TO 73.3 RPM, TAPER/RECEDING DIE HEAD. YES, LEADSCREW. YES, CHUCKS FRONT & REAR. 3 JAW, CUTOFF SLIDE. YES ...more

4- Head customer built resaw, 6" Wide belt, Hydraulic hold down rollers, 15 HP Motors on each head, Pneumatic tension.

one(1) used 20 hp Schold High Speed Disperser Serial number S4604 floor mount, air over oil lift Variable speed 20 hp motor, explosion proof tagged motor 3 phase, 60 hz., 230/460 voltage 2.25" diameter shaft x 39" long shaft Rated speeds: 600 - 3600 Overall height in down position: 69" Overall height in ...more

36" wide Top and Bottom Glues spreader with.04" - 1.75" thickness Capacity. -- s: (2) Grooved rubber covered 8.3" glue rollers are acid and heat resistant, (2) 6.9" hardened rubber doctor rolls. -- Converts quickly to Top only glue application when needed. -- Comes standard with a fixed 80 FPM feed rate (Optional ...more

2008 TSUGAMI SS20, MACHINING DIAMETER 0.75″, MAX MACHINING LENGTH 8.66″, MAX DRILLING DIAMETER 0.39″, MAIN SPINDLE MOTOR 5 hp, MAIN SPINDLE SPEED 10,000 RPM, BACK SPINDLE MOTOR 5 hp, BACK SPINDLE SPEED 10,000 RPM, TOTAL TOOL CAPACITY (POSITIONS) 24, LIVE TOOL SPEEDS 5,000 RPM, CONTROLLABLE AXES 7 ...more

Quad Roll Crusher. Size: 20 in. x 26 in. Two-Stage Material Reduction with One Pass For Friable Material: B-section Belt Drive to Main ShaftTramp Iron Release SystemManual ReleaseCommon Lube Spot10in Upper Rollers with 2in TeethChain and Gear Guards with Lube Ports40in Groove SheaveShipping information: Length: 92in ...more

The Haitian MAII 10000-8400 D is a robust used horizontal injection molding machine, suitable for high-capacity production with a clamping force of 1124 US tons. This machine is a screw diameter of 130 mm and a shot size of 217.28 oz of PS, capable of handling large-scale projects efficiently. The platen size measures ...more

, ROSS Model HSM-430SC Inline High Shear Mixer. Solids (powder) / Liquid Injection Manifold (SLIM). 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and ...more

, ROSS Model HSM-430SC Inline High Shear Mixer. Solids (powder) / Liquid Injection Manifold (SLIM). 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and ...more

One (1) refurbished hammer mill shaft and rotor Built for American Pulverizer Co. 15 x 9 chamber 4 swinging hammers, 2.75" x 8" Outboard roller bearings a fly wheel for increased inertia/force 2nd unit available, item 4701.

This Drum chipper is used in production of wood chips from logs and wood residues (slabs, board off cuts, veneer waste). It has a toothed driven roller system that allows an efficient infeed of the material, rotor with interchangeable thread locks and with a disposable steel plate in the front of the rotor, hydraulic ...more

The Niigata MD200S8000 is a new 202-ton injection molding machine designed for high-precision plastic manufacturing. With a shot size of 14.12 ounces and a 52mm screw diameter, it provides optimal output for producing medium to large parts. The machine s a sizable platen of 33.07 x 33.07 inches and tiebar spacing at ...more

K&S Roller Conveyor, -Maximum Weight: 6,000#, -Roll Face: 59.50", -Length: 60", -Pass Line: 48", -Roll Diameter: 2.50", -Powered: Yes, -In Storage: Toledo, OH.

Clausing Colchester Engine Lathe, 21" Swing, 120" Between Centers, 16" 4 Jaw Chuck, 3.5" Hole thru the spindle, 18 to 1400 RPM, Inch and Metric Threading, Tool Post Holder, Tail Stock, Coolant, 2 chip pans, 160" x 48" overall dimensions, 1 Steady Rest, -In storaage: Toledo, OH.

One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 75 HP 1750 RPM 500 VDC motor, 24.9:1 gearbox ratio, roller feed / power feed roll, approximately 14 week delivery.

Model: VE1200III/300 B-Screw, Us Tonnage: 135, Shot Size Oz Of Ps: 4.73, Screw Diameter: 36mm, Platen Size In: 27.17 x 27.17, Tiebar Spacing Hxv In: 18.5 x 18.5, Max Mold Height In: 19, Min Mold Height In: 6, Opening Stroke In: 14, Open Daylight In: 33, Ejector Stroke In: 4, Control: KEBA, Voltage: 460V/3P/60Hz.

For sale: Used JQ FLT-12035ETN 6kW Fiber Tube Laser with JQ Control. This high-performance CNC machine delivers precise tube cutting for various materials, ideal for metal fabrication and industrial applications. Reliable, efficient, and ready to boost your production capabilities., MACHINE, Wattage: 4kW, Max Pipe ...more

Performance 20 m/min, Spindle 1 kW (Eco mode) / 2.2 kW (Power mode).

62” X 157” Router with CNC Controls, Remote Access, Data Transfer over Remote Network Connection, Dust Extractor, Automatic Tool Length Measurement and Metal Fence on 3 - Sides, X - Axis: 1600 mm, Y - Axis: 4000 mm, Z - Axis (Without Tool): 200 mm, Total Power Consumption: 18 kW, Max. Rotation Speed: ...more

20' loader. 10' unloader. 3kW Tube Laser, The Trumpf TruLaser 5000 3kW (2017) is a high-performance CNC tube laser cutting system built for precision processing of tubes, pipes, profiles, and structural beams. Designed for heavy-duty metal fabrication, it delivers fast, accurate cutting and beveling on mild ...more

CAM-WOOD SFJ-3800-205-FM-FAH HIGH SPEED, LONG BOARD, HORIZONTAL JOINT, FINGER JOINTER: : -- Double Chain & Slat Type Shaper Section designed for long incoming boards -- Manual infeed; Slat Bed Feed Chain runs at up to 75 FPM; lugs on 30" centers. Slat Bed powered with a 15 HP gear motor with 1:40 gear ratio. -- ...more

Tube Diameter: 1" - 4"Tube Wall Thickness: 0.32" (or Max. 8% O.D.)Max. Tube Cut Length: 24"Operation Direction: Right to Left, 20' Bundle LoaderOperator Controls w/ Allen Bradley PanelView 600 Interface PanelTarget AssemblyCentral Grease.

The Niigata MD150S8000i-4.0 is a new electric injection molding machine. With a clamping force of 146 tons and a shot size of 6.51 ounces, it is well-suited for various industrial applications. The machine s a 40 mm screw diameter, ensuring consistent and high-quality production. It offers a platen size of 30.31 x ...more

Genturn SL42Y2 Hybrid 8-Axis CNC Swiss Machine (subject to buyer verification):Main SpindleMaximum RPM: 6,000 RPMMain Spindle Servo Motor: 10-Horsepower 15-minute Duty-Rated (7.5-HP Constant Duty-Rated)Collet Style for Main & Subspindle: Traub-42 / 173ECollet Closer Style: Lever Action Collet Closer – Driven ...more

The Niigata MD245S8000-i10 is a new horizontal injection molding machine, ideal for applications requiring precise and efficient performance with its 247-ton clamping force. It includes a 52mm screw diameter and an impressive shot size of 16.51 oz. of PS. The machine's platen measures 36.02 x 36.02 inches, and it ...more

Soest DRM-2-1 1300 Glue Spreader and Out Feed ConveyorSoest is well know worldwide for equipment used in wood floor, specializing in natural oil application and finishing. They also make glue spreaders, distressing machinery, and presses with a focus on wood flooring. The machine has an application roller and a dosing ...more

Rolling Mill Skoda Quarto 400/1000x800, New in 1985, Country of origin: Czech Republic, Model: Quarto 400/1000x800, Technical data:, Diameter of working milling rolls (min/max) 400/430 mm., Diameter of back up rolls (min/max) 980/1030mm, Length of rolls 800mm., Capacity of mill stands 12,5 MN, Max. Rolling speed 5,0 ...more

This Engel Electric Emotion 1340/310 injection molding machine, manufactured in 2011, offers a robust 310-ton clamping force. Ideal for medium-to-large scale production, it s a shot size capacity of 21.21 ounces (of PS) and a screw diameter of 55 mm, ensuring precise and efficient production cycles. The machine boasts ...more

Make: Nissei, Model: TH70EIII-5VE, Year: 2021, Machine Location: Upon Request, Capacity: 70 Ton, Shot Size: 1.65 oz, Screw Diameter: 1.02″, Clamping Force: 80 Tons, Clamping Stroke: 9.84″, Mold Thickness: 9.06″/13.78″ (min/max), Maximum Daylight Opening: 23.62″, Tie Bar Clearance: ...more

1996 Timson T32 one-color web offset press, 78" circumference x 32" width, Butler 3250-12 splicer, WPC web guiding, remote inking, Tec Coanda Plus dryer, chill stand, slitter section, Timson M7/4 combination folder, Baldwin stacker, plate bender/punch, and afterburner with chiller., 1996 Timson T32 One-Color Web ...more

Machine, Stock Number: 6915, Name: Taylor Winfield Press Spot, Transformer: 100 KVA, Manufacturer: Taylor Winfield, Mfg. Model Number ENE-18-100AIr Oper, Voltage: 440/460/480 Volts, Single Phase, Throat Depth: 24" in, Secondary Volts: 3.86- 9.15, Secondary Amps: 28,500, Serial Number: 76207, Air Type: ...more

Model: ZE 3000/1100h A-Screw, Us Tonnage: 337, Shot Size Oz Of Ps: 15.10, Screw Diameter: 50mm, Platen Size In: 40.94 x 40.94, Tiebar Spacing Hxv In: 28.35 x 28.35, Max Mold Height In: 25.59, Min Mold Height In: 9.45, Opening Stroke In: 23.62, Open Daylight In: 49.21, Ejector Stroke In: 5.91, Control: Sigmatek ...more

Model: ZE1200V/210, Us Tonnage: 135, Shot Size Oz Of Ps: 3.21, Screw Diameter: 32mm, Platen Size In: 25.2 x 25.2, Tiebar Spacing Hxv In: 18.5 x 18.5, Max Mold Height In: 18.9, Min Mold Height In: 5.91, Opening Stroke In: 14.17, Open Daylight In: 33.07, Ejector Stroke In: 3.94, Control: KEBA, Voltage: 460V/3P/60Hz.

Spec, Model: LCAS1.5, Maximum Thickness Allowance: up to 1.5 mm (TS 45 kg/mm²), Maximum Width of Steel Sheet: 1550 mm, Number of Straightener Rolls: 3, Straightener Roll Diameter: 79 mm, Number of Slitting Knives: 3, Diameter of Slitting Knives: 180 mm, Production Speed: up to 15 m/min, Equipment Power: 4.5 kW ...more