Buy or Sell Your Plastic Molders

, Explore the Parlec C40-20ER4 CAT40 Collet Chuck, perfect for your tooling needs. This used chuck s a 4.0" gage length, 6.75 OAL, and 1.25 body diameter. Ideal for enhancing your machining capabilities., Spec Sheet:, Parlec C40-20ER4 CAT40 Collet Chuck, USED, Brand: Parlec, Holder Type: CAT40, 4.0" Gage Length, Part ...more

, Sandvik Coromant CAT50 Varilock Collet Chuck, Model A390.45-50 50 040M. Used, with 8.25" OAL, 4.5" projection. Holder diam. 3.86", body diam. 2.75". Ideal for precision work, available now for your tooling needs., Spec Sheet:, SANDVIK COROMANT CAT50 VARILOCK COLLET CHUCK A390.45-50 50 040M, USED, Brand: Sandvik ...more

Used 29" Wide Spadone Downacting Guillotine Cutter, Has approximately 18" stroke and daylight, powered by 10 hp hydraulic pump, 208-230/460 volt, Includes downacting approximately 2" diameter hydraulic cylinder, 29" wide x 38" long infeed rollers conveyor, 29" wide x 21" long exit roller conveyor and 30" load height ...more

Tishma Model TI-600, automatic, horizontal, servo driven, continous motion, tuck cartoner rated from 50 to 250 cartons per minute – depending on materials, application and machines configuration. 90" long x 2-1/2" wide delron product in feed belt conveyor with automatic over head sweep arm product ...more

7/8" cutting tool insert, Shank diameter. 2", Cutting tool holder. 7/8", Length. 9", Weight. 9LBS, Overview, Type:TOOLING & ACCESS._See also Specific CategoriesModel:E-2535Condition:GoodStock #:11657Status:For Sale.

Spec Sheet:, Jacobs 16N 3JT Ball Bearing Super Chuck w/ CAT 50 Holder, USED, Brand: Jacobs, Type: Ball Bearing Super Chuck, Part Number: 16N, Arbor: 3JT, Holder: CAT 50, Cap: 1/8-5/8in / 3-16mm, Key included.

SKU: 126413, Model: 9013, Condition: New, Tooling Style: European, Type: Die Holders, Length: 161.41 In, Flame Hardened: Yes.

Cemco 2000 Wide Belt, Fair/good condition., It starts and runs until we unplugged it 12 years ago, Belt size 37 x 75, 2004, Single head, 1- 5” roller top, 2 - 5” rollers bottom, 1 rubber covered, 1 steel. No platen, Thickness ¼” – 6”, 2179 hours on machine, 230 V, 60 CY, 3 PH ...more

Overview, Type:Compact Press Feeding SystemsManufacturer:BMTModel:M-SeriesCondition:Build To OrderStock #:1888Status:For Sale, Our Compact Press Feeding M-SERIES System has consist of Decoiler and Servo Feeder with Straightener System with the Working Capability of 4.000 10.000 Kg. Coil Weight, 60 1300 mm. Coil Width ...more

Blueprint Automation Model Swing Machine, automatic, single robotic arm, horizontal or vertical load, case packer rated up to 150 bags or cartons per minute with number of cases – depending on materials, application and pack pattern. Case / bag / carton size range: per application. 72" long x 12" wide ...more

Toresani Pavan Model MT600-9A is a tortellini pasta machine designed to produce small tortellini pastas. It s a nine-punch system and is constructed with mild steel dough sheet rollers. The unit comes with a hopper feeder for easy dough input and two sets of double dough sheet rollers, measuring 4.687" diameter X ...more

62" Wide Stanford Model 2038-RT Duplex Cantilevered Slitter Rewinder, Separate unwind stand, shaftless floor pick up, 3" diameter cores, 40" max diameter, Pneumatic brakes on unwind, Splice table between unwind / slitting station, Fife CDP-01 web guide, Shear slitting with individual knife holders (appx 13 male & ...more

, ISCAR ETM BHR MB50-63X80 rough boring head with CAT 50 holder available. Used condition, 4.75in projection, 2.82in body diameter, and 9in overall length. Ideal for precision machining tasks., Spec Sheet:, ISCAR-ETM BHR MB50-63X80 ITS BORE ROUGH BORING HEAD w/ CAT 50 Holder, USED:, Brand: Iscar, Part Number: ETM BHR ...more

PRE-QWNED H STAND Conveyor StandPRE-OWNED H-STANDS FOR ABOVE GRAVITY CONVEYOR. -- Approx. 24" Wide -- Approx. 36" - 40" High Top of Roller -- Adjustable Height.

Muller Martini Corona C18 perfect binding line installed in 2013 and configured with a Muller Martini 3691 gathering system, Zenith-S 3672 three-knife trimmer, and CB16 stacker with counting. This complete binding line is designed for efficient production of books, catalogs, manuals, and commercial print products. The ...more

LEWCO NON-STANDARD MODEL "2511" GRAVITY ROLLER CONVEYOR2.5" Dia., 11-Gauge Rollers, 37" between Frames, Roller Centers 4.5" and conveyor Length 120".Frame: F96-Channel, 4" x 1-1/2", 8 gage rollers set 1/4" high. - Roll Bearing: A6204, Semi-precision, oiled, 11/16" hex axle. Roller Cover: V98 Carbon Steel, Axle ...more

48" Wide Urethane Covered Gravity Feed Conveyor System. System includes the following: 24 pcs 48" X 96" urethane covered conveyor sections --Rollers 1.9" Dia., 12 ga wall --Between Frames: 48 Inches --Roller Center: 6 Inches --Length: 96 Inches --Frame: F97, Channel frame rails, 3-1/2" x 1-1/2" 12 gage with rollers ...more

CAM-WOOD WP-2400S SINGLE SIDED PLANER WITH SPIRAL HEADs & : -- Self-braking motor 5 HP, Magnetic starter & thermal overload switch. -- Solid cast iron construction. -- Precision ground cast iron table w/manual adjustment by hand wheel via (2) large lead screws, up to 7" opening. -- Scale & pointer readout ...more

RazorGage AngleMaster Programmable Angle Saw SystemRazorGage ST with AutoList and AngleMaster software integrated to the RazorGage AngleMaster programmable angle saw system.Since the stock is on rollers, the operator must also ensure that the stock is against the auto pusher system before cycling the saw. Specify the ...more

Toresani Pavan Model MT600 is a tortellini pasta machine designed to produce small tortellini pastas. It s a nine-punch system and is constructed with mild steel dough sheet rollers. The unit comes with a hopper feeder for easy dough input and two sets of double dough sheet rollers, measuring 4.687" diameter X 23.5" ...more

Item #: CB5125 MAZAK SQT15MS TURNING CENTER, -- SERIAL: 120719 -- SUB-SPINDLE -- LIVE MILLING -- T-PLUS CONTROL -- AGE: 1996 -- 8" MAIN CHUCK, 6" SUB CHUCK -- CHIP CONVEYOR -- 3 - LIVE TOOL HOLDERS PRICE: FOB CLEVELAND, OH - - - $16,350.

Used 29" Wide Downacting Hydraulically Actuated Guillotine, With approximattely 25 hp hydraulic pump supplying a 3" o.d. hydraulic cylinder, Has approximately 20" daylight and stroke, includes a set of safety light curtains and operator control panel, Has 32" wide x 72" long infeed roller conveyor, 32" wide x 40" long ...more

12 Wide x 10 Long Roller Conveyor. 2" diameter plastic rollers mounted on a stainless steel frame for durability. Serial number unavailable., Type: Gravity Roller Conveyor, Measurements: 12" Wide X 10' Long, Materials of Construction: Stainless Steel, Basis: FOB.

Ficep 2008 Victory Beamline with low hours., Options:, Through Tool Coolant, Quick Change Holders, 50 feet of table with 40 ft processing..

Basic Parameter: Structure Two sides sand belt and four edge rounding rollers, magnetic table Working Width 630mm (24.8") Configuration: Working Width Range 10mm-630mm (0.4" -24.8") Metal Piece Thickness 1mm-50mm (0.04"-1.97") Minimum Piece Size 50mm*50mm*1mm (1.97" * 1.97" * 0.04") Total Power 18kw Sand Belt Speed ...more

SUPERFICI/VALTORTA F1: --Belt width - 1370 mm / 54 inches, Roller width 1500 mm / 59 inches --Working height 900 mm / 35 inches --Panel thickness 3 - 120 mm /.11" - 4.75" -- Min. panel length - 300 mm / 11.8" -- Application roller diameter - 245 mm / 9.6" -- Standard hardness of the application roller - 50Sh -- Doctor ...more

used- otec series df drag finishing machine, model df 35. consists of (3) workplace holders 8" diameter with (12) 1-1/2" inserts. driven by 0.75kw, 660 rpm at 60hz, 138 rpm at 50hz, 230 volt, motor. has octagonal stainless steel process container 42l capacity. mounted control panel with siemens simatic touch panel ...more

EXTREMA XF-DC4 Power Feeder w/Mounting ColumnExtrema has a wide range of power feeders that range from compact junior feeders to large 5-roller feeders. The XF-DC4 Series s a 4-roller system with variable speeds. Includes the 2/3 HP DC brushless servo motor for higher torque and better variable speed control than a ...more

MTC, Model HLC2HD, column barrel dumper. Rated to a maximum capacity of 1000 lbs. a roller bottom drum hoist with 23" wide x 2" diameter rollers. Lift is powered by a 2 HP drive and has a discharge height of 124"., OAD: 50"L x 45"W x 166"H.

Spec Sheet:, YUASA NT50-1-1/4 CAT 50 Tool Holder, USED, Brand: YUASA, Part Number: NT50-1-1/4, Holder Shank Type: CAT 50, End Mill/Tool Holder, Size: 1-1/4, OAL: 7 (entire piece), Made in Spain.

EquipmentStructural Steel Processing LinesBeam Coping Machines (Robotic)2021 Voortman V807 Complete Robotic Beam Coper with Hypertherm XPR3002021 Voortman V807 Complete Robotic Beam Coper with Hypertherm XPR300Have one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest ...more

Used 2004 Heidelberg Mercury web offset press system configured with two towers and four webs. Suitable for newspaper production as well as semi-commercial products including inserts, flyers, and light commercial work. The system includes infeed, splicing, printing, folding, and stacking equipment., 2004 Heidelberg ...more

80 Ausquip Model JM-80-60 Two Drum Slitter Rewinder Shaftless floor pick up unwind with 16 pneumatic brakes Unwind chuck sizes: 3", 4", 5", 6", 8", 10", 12" Unwind diameter: 72" Web guide Shear slitting with Tidland Class III knife holders Minimum slit width: 3" Dual spreader rollers after slitting Rewind diameter: ...more

Hosokawa / Bepex / Hutt, Model FP 200 AA, automatic, rotary bar roller press with pounds of product per hour – depending on materials, application and machine configuration. a 30" long x 5" wide x 19" deep jacketed product feed hopper and (2) 200mm diameter x 800mm long jacketed rollers. Control ...more

, Parlec C40-40ER412 CAT40 collet chuck, used condition, offers a 4.0" gage length, 2.5" body diameter, and 6.75" OAL without button. Ideal for enhancing tooling efficiency., Spec Sheet:, Parlec C40-40ER412 CAT40 Collet Chuck, USED, Brand: Parlec, Holder Type: CAT40, 4.0" Gage Length, Part Number: C40-40ER412, 6.75 ...more

B-286 Wagner Cyclone Powder Booth System- 5’ -0” W X 7’ -0” H Opening-Type of System: S-Cube Monocyclone, Down-Draft Reclaim Powder Booth, -Profile opening: 5’ -0” wide x 7’ -0” high, -Dimensions: 12’ -7” High x 26’ -6” Long x 26’ -9” ...more

-- 101 SS55808: (2) Gluing heads, (1) top & (1) bottom for foil application; includes: Feed pump for glue, PVAc glue & level control plus (2) IR screens (1 top & 1 bottom) for glue pre-drying and (2) potentiometers for IR screens foil. - The model with these groups is called "RFU-C-1700". -- 101 0575-RFU: ...more

Spec Sheet:, Kennametal QC50EM050275 NMTB50 End Mill Holder, USED, Brand: Kennametal, Part Number: QC50EM050275 / C-J-12, Holder Type: NMTB50, End Mill Size: 1/2, OAL: 9 w/ Button 7-3/4 without button.

, Scully Jones 95414 X-Press-Change End Mill Holder, used condition. Cat 45 holder type, OAL 4-1/2in, 7/16in bore diameter, 1in body diameter, 1-3/8in projection. Ideal tooling solution, see spec sheet for., Spec Sheet:, Scully Jones - 95414 - X-Press-Change End Mill Holder, USED, Brand: Scully Jones, Part Number: ...more

, Carboloy Tool Holder, Model 4096551-064, used. Type: CAT 40 with a 9.25" OAL, 2.25" body diameter, and 2.75" end width. Ideal for precision tasks. Price per unit, see final image for availability., Spec Sheet:, CARBOLOY 4096551-064 - TD-76541 END MILL TOOL HOLDER, Priced for EACH!, Last photo to show availability ...more

Used Goss M600A, a 16-page commercial web offset press, offers 38" width, 625mm cutoff, and 4-unit system with integrated JF45 folder. Includes Contiweb splicer, dryer, and Goss console. Ideal for high-quality output in printing operations., 2007 Goss M600A (4) Unit (1) Web Offset Press System, 24.61” (625mm) ...more

DIAMETER OF HOLE. 12", ROLLERS. 3, ROLLER WIDTH. 2-3/4", BASE. 7" X 19", OVERALL DIMENSIONS. 42" X 7" X 39" H.

- 7 x 16 ft Agglomerator, - Skid mounted, - Motor and gearbox chain drive, - Motor-gearbox adjustable steel baseplate, - Used gearbox included, single reduction parallel shaft, - 8 in width rollers, - Roller guards, - Discharge trommel.

Year: 1996, Make: Amada, Model: HFB-1003, Tonnage: 110 Tons, Overall Length: 122.4", Between Housing: 106.2", Stroke: 7.8", Open Height: 18.5", Weight: 28,660lbs, Dimensions: 168" x 96" x 115"H, Operateur Control, 5 Axis Backgauge, 2 Finger assemblies, Foot Pedal, Misc Punch Holders ...more

, 10 roller section.

CAM-WOOD TRS-805-H2X Multiple Round Pole Makers: Single to Multiple Round Pole Making with Flutes all in one pass: -- Working Capacity (Maximum Working Size): 8"; Width, 4-¾";He right. -- Pole Making Length: Minimum10";, Maximum Unlimited. -- Spindle : Precision spindles are manufactured of SCM-4 tool steel ...more

Used CPW powered roller conveyor, 16"W x 36" long straight section with steel rollers, (2) 90° rubber roller sections, all powered, with vacuum box lifter, on legs.

, 16 6 jaw chuck w/5.5 hole x 7.5 deep, Taper attachment, Variable speed spindle, Sony 2 axis DRO, Coolant, Chip pan, Special Note: The bed has above normal wear. Tolerances are: 7 front of bed (face of chuck) 0.00, 17 =.008, 27 =.012, 37 =.008, 47 = -.0015, 57 = -.006, 67 = -.008, 77 = -.010.

D M C SYSTEM TM 1650 RRKb - Wide Belt Sander, 1,650 mm (65") 3-Head; A good condition 65" wide machine! (2) contact rollers - (1) combination head - brush roller.Max. workpiece thickness 170 mm (6-11/16"), min. 3 mm (1/8"). Sanding belt length 3,250 mm (128"). -- Head configuration: -- 1st Head: Contact roller, steel ...more