Buy or Sell Your Plastic Molders

SKU: 149389, Model: CV-18 DR/HEAD, Year: 2024, Condition: Surplus New, S/N: 289231-001, Pulley Type: Idler Roll, Drum Width: 18 in., Dimensions: 23.00 (H) x 23.00 (W) x 82.00 (L) inches, Additional :, Roller Diameter: 18", Face Width: 44", Shaft: 4.5".

50” X 27” X 25” Vertical Machining Center with ProtoTrak RMX CNC Control, Chip Auger and 16 Tool Capacity ATC., Table Size: 23.62” X 51.18”, T - Slots: 5 X 0.709” X 4,921”, X / Y / Z Travel: 50” X 27” X 25”, Spindle Taper: 40 Taper, Spindle Speed Range: 50 - ...more

Used Simpson Mix Muller, 1 gallon capacity, carbon steel construction, with approximately 12" diameter x 7" deep mixing bowl, 6" diameter Muller wheels, with bottom and side wall scrappers, driven by.75 hp, 230/460 volt xp motor drive on base.

WEINIG Powermat 2000 6-Head (B-R-L-T-T-B) Head Configuration: -- Working cap. 11-13/16" x 7-7/8" (300 x 200 mm). -- Spindle sequence: 1. Bottom 15 HP (11 kW), 2. right 20 HP (15 kW), 3. left 20 HP (15 kW), 4. top 20 HP (15 kW), 5. top 7.5 HP (5.5 kW), and 6. bottom 7.5 HP (5.5 kW). All motors with electronic brakes. ...more

One (1) Used Lufkin model D890AH double reduction horizontal parallel shaft mixer speed reducer, arrangement R-LL, 21.85:1 reduction ratio, 1882 HP Catalog Rating, Service Rating 1,000 HP @ 900 RPM with 1.75:1 Service Factor. This unit is complete with anti-friction type roller bearings on all shafts, includes dual ...more

200 Ton JSW Electric Servo Injection Mold Machine, Shot size: 10.1 oz., Tie bar spacing: 20.90" x 20.9", Daylight: 37", Clamp stroke: 17.3", Mold thickness: 8.7"/19.7", Syscom 100 Control, Yushin HOP Sprue Picker.

1989 Muller Martini Norm perfect binder configured with 18 gathering stations and 20 clamps with three knife trimmer, forming a full perfect binding line., Manufacturer: Muller Martini, Model: Norm 3000 1/2S, Year: 1989, Machine Type: Perfect Binder, Gathering Stations: 18, Clamps: 20, Mechanical Speed: Up to approx. ...more

Keyence, Model MK-G1000PY- Yellow ink, ink jet coder with auto-shower self cleaning print head. Capable of running 1 to 6 lines at speed up to 2525 characters at 5-dot 1 line printing and 1-dot character spacing, with number of prints per minute – depending on materials and application. Character types: ...more

Used Schneeberger Aries NGP. This pre-owned Tool Grinder is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Schneeberger Tool Grinder we can review machine. To request a quote, inquire about rigging and trucking or to schedule an ...more

Standard Catalog, Serial no. 20615041, Model H - 11, A, Horizontal Programmable, 11" x 13.5" cap, 120" roller exit table x 26" wide, 1-1/4" x 14'9" Blade size, Model TS-50 Programmable controller., STANDARD S The H-11A is an automatic horizontal band saw providing accurate 90° metal cutting for medium ...more

greif velox model velofill open bag mounting, filling & seal machine (used, 2017). capacity of up to 350 bags per hour. filling capacity up to 35 kg gross weight paper, polyethylene (pe), polypropylene (pp) woven valve bags. frame mounted. complete with belt conveyers, automated controls for quick change over and ...more

, HP: 850, Mfg.: Electric, RPM: 300/900, Current: 1390, Winding: Shunt, Excitation: 300 Volt, Ventilation: DPFG-BV, Bearing: Roller, Est Weight: 38,000.

Product Leblond 16 Heavy Duty Lathe 20″ x 156″, Actual Swing 20 1/2″, Distance Between Centers 156″, Spindle Hole 1 3/4″, Taper Attachment, Steel Steady Rest with Roller Jaws, Toolpost & Holders, There is no compound on the carriage- the toolpost mounts directly to the cross-slide..

CEFLA / DUSPOHL Profile wrapping system for PVC wrapping and other substrates. This machine is a 2022 model year and was never installed. So it is just as a Brand New machine. As you look through the pictures you will see that it is still in parts on pallets, quite difficult to get overall pictures but you can see the ...more

EMC FLEXY 1350 3WRK Abrasive Planer / Wide Belt Sander with (3) Heads; Knife Head, Roller, Combination Head Roller/Pad.Useful working width 1,350 mm (53"). Working thickness min./max. 3 - 190 mm (1/8" - 7-1/2").Head configuration: 1st Head: Knife Planer Head "W" -- Cutter head knives diameter 140 mm (5-1/2"). -- Shaft ...more

used- tri-clover tri-blender, model f3218md-b60, stainless steel. approximate 7.5" diameter 316 stainless steel impeller. 4" tri-clamp powder inlet with 304 stainless steel hopper, 2" tri-clamp liquid inlet, 2" tri-clamp outlet. mounted on a stainless steel base with casters.

Batch Powder Coating System:, ID: 9'W x 10'H x 38'L, BTU: 2,500,000, This is a drive through system with doors on both ends and comes with a powder coating booth., Syntec Systems Corp. is a veteran-owned premier systems house of new and used Industrial Metal Finishing Systems and houses one of the worlds largest ...more

Model: DB12, Vacuum Motor: 1.3 Hp Brushless, Max Injection Mold Machine Size: 2000, Max Extruder Size Inches: 4, Voltage: 115/60/1, 13 FLA, Recommended Throughput Lb Hr: 500.

One (1) Used Lufkin model DF582 double reduction horizontal parallel shaft Farrel F80 or 3D mixer speed reducer, L-RR arrangement, 19.16:1 reduction ratio, 1160 HP Catalog Rating, Service Rating 600 HP @ 1150 RPM with 1.94:1 Service Factor. This unit is complete with anti-friction type roller bearings on all shafts ...more

Item 8290 - One (1) Used Bolling UNIDRIVE double reduction horizontal parallel shaft mixer speed reducer, arrangement L-RR, 22:1 reduction ratio, 630 HP Catalog Rating, Service Rating 360 HP @ 1200 RPM with 1.75:1 Service Factor. This unit is complete with anti-friction type roller bearings on all shafts, includes ...more

The Timken 4335 is a single tapered roller bearing cup serving as the outer raceway in a TS-type tapered roller bearing assembly. Part number 4335 belongs to Timken's 4300 series and is designed for use with a compatible tapered roller bearing cone to manage combined radial and axial loads. Published for this cup ...more

Veris HEW3MSTH Wall Humidity Sensor ABS Plastic +/-3% Accuracy 4 to 20 mA 10 k - Veris HEW3MSTH Wall Humidity Sensor ABS Plastic +/-3% Accuracy 4 to 20 mA 10 k Ohm T3 Thermistor Standard Wall Mount Humidity and Temperature Sensor - Veris - Veris Industries - HEW3MSTH - HEW3MSTH.

Eaton Circuit Breaker, Molded Case type, Catalog Number FD4150, 150 amp frame current, 600 volts.

One Brand New Incofab Model SCR-35-SR In Line Wire Heater,.080"-.750" Approx. Wire Size, 35 KVA Rating, 2 to 750 Capacity in Lbs. to 575 F./hour ( based only on ferrous materials), This machine is Slider & Roller contact., Electrical Information, Single Phase, 440 Volts 80 Amps, Or 220 Volts 175 Amps, 60 Hertz ...more

Siemens Circuit Breaker, Molded Case type, Catalog Number MXD63S800, 800 amp frame current, 600 volts.

Eaton Circuit Breaker, Molded Case type, Catalog Number MD3800F, 800 amp frame current, 600 volts.

Siemens Circuit Breaker, Molded Case type, Catalog Number ND63B900, 900 amp frame current, 600 volts.

One Used National Model 500 DSSD Roller Header Set Up As A Ball Header, Serial No 33307, 3/8" Cutoff Diameter, 1/2" Roller Size, 15/16" Maximum Cutoff Length, 100 Pieces Per Minute, AC Motor and Control, PLEASE NOTE: MACHINE IS CONVERTED TO A SINGLE STROKE HEADER TO PRODUCE SPHERES, Weight - 13,500 Lbs.

New 22,500 lbf (100kN) Force Capacity Wedge Action Tensile Grips, 22.5K (100kN) Capacity Wedge Action Grips Includes:, (2) Wedge Holder Assemblies, (Fits Instron Mounting Hubs with 1.25" ID), (3) sets of Vee Grip Wedges, 4 - 9mm (0.158 - 0.354") 9 - 14mm (0.354 - 0.551") 14 - 20mm (0.551 - 0.787") (2) Sets of Flat ...more

Acra Turn LS-600 Engine Lathe #7669 #2, Swing Over Bed: 24", Swing In Gap: 32", Swing Over Cross Slide: 14", Spindle Speeds (12): 23 to 1,500 RPM, Spindle Hole: 3-1/8", Threading: in/mm, ;, 4-Jaw Chuck, Coolant, Newall DP700 Digital Read Out, 2-Speed Tailstock, Threading, KDK Tool Holder.

SCMI - OLIMPIC K 360: Compact Edgebander with Premilling -- Edge Capacity: 0.3 - 3 mm (0.012 to 0.118") For coiled edges (0.3 - 6 mm for strips with 6 x 60 mm kit included). - Coil holder-plate dia.: 780 mm (31"). -- Panel Capacity: Min. width: 90 mm & 140 mm Min. length (3-1/2" and 5-1/2").Panel thickness. ...more

Taylor Products TEVB-2 Electronic Drum and Box Filler w/ Safeline Metal Detector, Taylor Products TEVB-2 Electronic Drum and Box Filler with metal detector., Serial Number TEVB-2-5527., Overall height 109.5" x 36" wide x 77" front to back., Stainless steel product hopper 36" x 36" x approx 36" ...more

Square D Circuit Breaker, Molded Case type, Catalog Number BJL36110, 110 amp frame current, 600 volts.

Eaton Circuit Breaker, Molded Case type, Catalog Number HKA3225, 225 amp frame current, 600 volts.

Square D Circuit Breaker, Molded Case type, Catalog Number LAL26225, 225 amp frame current, 600 volts.

Eaton Circuit Breaker, Molded Case type, Catalog Number HLB3300, 300 amp frame current, 600 volts.

Eaton Circuit Breaker, Molded Case type, Catalog Number HLD3600F, 600 amp frame current, 600 volts.

Eaton Circuit Breaker, Molded Case type, Catalog Number NDC312T36W, 1200 amp frame current, 600 volts.

Square D Circuit Breaker, Molded Case type, Catalog Number NAL361200, 1200 amp frame current, 600 volts.

Square D Circuit Breaker, Molded Case type, Catalog Number SED361600LSG, 1600 amp frame current, 600 volts.

- 10.9 x 6.2 meter shell, - 20,100 HP (15,000 kW) Gearless Drive, - 50 Hz ABB motor, - Complete with control rooms and transformers, - mill was part of a cancelled project, stored to manufacturer, Estimated processing capacities:, - 1,625 TPH moderate ore, - 1,300 TPH hard ore, - 1,950 TPH soft ore.