go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Cam-Wood #UTC-200, continuous in-line long board vertical finger jointer, 7.87" W x 2.95" board, 2024

Manufacturer: Cam-Wood
Model: UTC-200
Year: 2024
Stock # FJ-300037
Price: $234,900

For Sale by Ex-Factory

Gold Level Dealer
Surplus Record Dealer Since 2022
  Sales Dept.
  704-28...> Show Seller's Phone Number 704-285-2223 Let the seller know you found their listing on Surplus Record!

Description

CAM-WOOD Continuous in-line Long Board Vertical Finger Joint System, Model "UCT-200"
Up to 200 mm (7.87") Wide x 75 mm (2.95")4-1/4" Thick x Unlimited Assembled Length
System Specifications:
  • Incoming board lengths from 39” to 236" (1,000 mm - 6,0000 mm).
  • Board widths from 2” to 7.87” (50 mm - 200 mm).
  • Board thickness from 1" to 2.95” (25 mm - 75 MM).
  • Board out-feed length unlimited (Conveyor to be quoted separately)
  • Glue type to be used: PVAC. with Standard pneumatic pump and spreader included ( For different glue then PVAC Glue pump and applicator not included)
  • Board species: SOFTWOOD and HARDWOOD.
  • Board moisture content: 8% to 12%.
  • Infeed board qualities: Lumber runs best on Finger Jointers when surfaced on (4) sides (S4S) (Tolerance +/- .2 mm (.008"). System prefers straight boards with 90-degree corners.
    UCT-305 Mechanical Specifications:
  • Top infeed feed rolls powered with (2) 2HP motors.
  • Bottom infeed feed rolls powered with (2) 2 HP motors.
  • In-feed Inverter with (2) 7.5 HP motors.
  • Auxiliary conveyor wheel with 2.6 HP servo motor.
  • Top Shaper Spindle powered with a 30 HP motor.
  • Bottom Shaper Spindle powered with a 30 HP motor.
  • Maximum Cutterhead length, 12“(305 mm).
  • Maximum Cutterhead diameter, 6.3“(160 mm).
  • Typical cutter pitch, 4.0 mm. Length, 10 mm - 12 mm (Other sizes available).
  • Shaper spindle moving power by 2.6 HP Servo Motor.
  • In-feed speed from 32 to 295 FPM (10 ~90 m/Min).
  • Outfeed cut-off saw motor, 10 HP.
  • Cut-off sawblade, 24“ dia x 120 teeth (included).
  • Cut-off sawblade speed, 2,850 RPM.
  • Hydraulic pump power, 30 HP.
  • Top outfeed feed rolls powered with (2) 2 HP motors.
  • Lower outfeed feed rolls powered with (2) 2HP motors.
  • Out-feed Inverter with (2) 7.5 HP motors.
  • Glue injection Glue Applicator for Standard PVAC glue.
  • Hydraulic oil tank with 150-gal capacity (oil not included)
    Outfeed options:
  • Outfeed roller conveyor 20'' X 8' long Additional: $ 4,890 per section
    Not included with the machine:
  • Cutter heads for finger jointer (we can provide quote)
  • Gluing system with pump and nozzle if different then PVAC glue
    Optional Cross Infeed Conveyor System:
  • 8’ X 19’ Lateral Long Infeed Conveyor System To Meet Production Requirement.
  • Working size accepts inbound boards from 39"40” to 236" long x 2” to 12” wide x 1” to 4-1/4” thick.
  • Cross feed system 3 HP drive motor.
  • Feed speed 48.75 FPM. (15M/Min)
  • 8’ (2,500 mm) Buffer Chains.
    Additional: $28,990
    NOTE: Training, installation & tooling not included
    TO BE PROVIDED LOCALLY
  • Electric power supply to Motor Control Center
  • Constant voltage (voltage deviations max.: 5%)
  • Temperature range for computer control should not exceed 95F.
  • 65% Maximum relative air humidity for computer control system
  • Dust exhaust system: (V=30M/S at a low pressure of 12M BAR)
  • Compressed air connection to machinery: 7~8 KG/cm – 8 BAR
  • Electrical cabling, dust collecting ductwork.
  • Hydraulic oil
  • Skilled operating and maintenance personnel
  • Noise control (if required)
  • Well illuminated work environment
  • Computer cable if machine is with remote monitoring.
  • Dust Collecting Connection: (5) points with 4” Diameter each.
  • Compressed air requirement: 30 HP + 100-gallon receiver
    Product capacity, maximum 5 jointer cycles per miminute.
    Example:
    a. 8” x 2 = 16” long (One Joints) then 5 jointer cycles / 1 = 5 pcs per minite * 60 minutes * 8 hours = 2,400 pcs per 8 hours.
    b. 20” x 2 + 8 ft x 1 = 48” long (two Joints) then 5 cycles / 2 = 2.5 pcs per minute * 60 minutes * 8 hours = 1,200 pcs per 8 hours.

Submit Inquiry to Ex-Factory

"*" indicates required fields

Requests
Send Copy
Buyer Protection info
Buyer Protection
Hidden

Share