1 / 2
Click to zoom in
1 / 2
For Sale by Machine Tool Technologies
Surplus Record Dealer Since 2011
Location: Milwaukee, WI
Contact Joe Ryan
Phone Number: 414...> Show Phone Number 414-486-9700
Let the seller know you found their listing on Surplus Record!
Description
Spec
Model: LCS2
Maximum Thickness Allowance: up to 2 mm (TS 45 kg/mm²)
Maximum Width of Steel Sheet: 1550 mm
Number of Straightener Rolls: 9
Diameter of Straightener Rolls: 112 mm
Number of Slitting Knives: 3
Diameter of Slitting Knives: 200 mm
Production Speed: up to 15 m/min
Equipment Power: 9.2 kW (400V, 3-phase + N)
Total Line Power: 11 kW
Tolerance on Cut Length: +/- 1 mm
Tolerance on Slitting Cut: +/- 0.5 mm
Tolerance on Cross Section: +/- 0.2 mm
Description
Stefa LCS2 cut-to-length line with longitudinal slitting capabilities. Slitting is performed through penetration of rotating knives with vertical movement of the slitting shaft controlled by wheels equipped with millimeter indicators. Rotary knives are adjusted by free positioning and secured with an easy lock system by screw. The slitting area is protected by a metallic door with a safety sensor.
Get Your Price from Machine Tool Technologies!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
61" x .394" Taci Fagor, Cut-To-Length line Line, 50000 lb., 25 ton, 30" ID, 78.7" outside dimension, LR
Category: Cut-to-length Lines
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fagor
Make: Taci Fagor (Spain), Type: Stop / Start, Material Width: 300mm - 1500mm, Material Thickness: 2mm - 10mm, Coil Weight: 25 ton, Coil ID: 508mm - 760mm, Coil OD: 2000mm, Direction: Left to Right, Entry Coil Car, Pit Type Design, Powered Lift, Dual Cone Uncoiler, Powered Hold Down Roll, Sliding Base / Feed Up Motor ...more
JUST ADDED!
60" x .075" Red Bud #RM30-72-50, Cut To Length Line, 50,000 Lb, 175 FPM, 1999
Category: Cut-to-length Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Red Bud
Model: RM30-72-50
Year: 1999
, Width Capacity: 60”, Thickness Capacity:.075”, Weight Capacity: 50,000 Lb., Line Includes:, Red Bud Coil Car, 50,000 Lb. Capacity, Floor Mounted, Non-Traversing, V-Deck With Hydraulic Lift, Red Bud Uncoiler, Model RM30-72-50, 72” Max Width, 50,000 Lb. Max Coil Weight, Attached Powered Hold Down ...more
JUST ADDED!
61" x 0.06" Stefa #LCS1.5, Cut-to-Length & Slitting Line, 9 straightener rolls, 3.11" roll diameter, (3) 7.2" diameter slitting knives, 14.75 HP, 49.2 FPM
Category: Cut-to-length Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Stefa
Model: LCS1.5
Spec, Model: LCS1.5, Maximum Thickness Allowance: up to 1.5 mm (TS 45 kg/mm²), Maximum Width of Steel Sheet: 1550 mm, Number of Straightener Rolls: 9, Diameter of Straightener Rolls: 79 mm, Number of Slitting Knives: 3, Diameter of Slitting Knives: 183 mm, Production Speed: up to 15 m/min, Equipment Power: 7.5 kW ...more
60" x .135" Paxson, 40000 lb., complete with 6HI Corrective Leveler
Category: Cut-to-length Lines
Seller: CJE Machine
Location: Cumming, GA
Mfr: Paxson
Year: 1976
60" x .125" Paxson, Cut-To-Length line, 40000 lb. 20-24" ID, RL, 220 KVA, 480 V., 1976
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Paxson
Year: 1976
Paxson Cut to Length Line, -Width: 60", -Thickness: 0.020" - 0.125" @ 50,000 PSI Shear Strength, -Coil I.D.: 20" - 24", -Coil Weight: 40,000 lbs., -Line Speed: 30 - 300 FPM, -Line Direction: Right to Left, Consisting of the following:, -Entry Coil Car:, Above Floor Type, 48" Wide Bed, Distance from Floor to bottom of ...more
