301 - 350 of 460 listings
JUST ADDED!
4.7" Davis Standard #120MM45CT, extruder, 120mm, 30:1 L/D, 200 HP, electrically heated, water cooled, temperature control panel
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 120MM45CT
120mm Daivis Standard Extruder Mdl.# 120mm45ct, Davis Standard, Model: 120MM45CT, -Screw Diameter: 120 mm -L/D Ratio: 30:1 -Electrically Heated -Water Cooled -Motor: 200 HP -Temperature Control Panel.
4.72" Reifenhauser, 5-Layer Cast Film Extrusion Line, 86.6" film width, 40/87/211 HP, 656 FPM, 98.4" die width, 31.5" chill roll diameter, 2008
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Reifenhauser
Year: 2008
REIFENHAUSER 5 LAYER CAST FILM LINE, MFG 2008, 86.6"(2200mm) WIDE, FILM STRUCTURE ABBBC, MATERIAL CAST POLYPROPYLENE, FIL STRUCTURE ABBBC, SPEED 7800'/ 200M PER MINUTE, EXTRUDER LAYER 1 SCREW DIAMETER 70mm L/D, DC MOTOR 65kw, BARREL REILOY, MANUAL SCREEN CHANGERS, GRAVIMETERI DOSING UNIT, EXTRUDER LAYER 2 SCREW ...more
JUST ADDED!
4.9" KMD, twin screw extruder, 125mm, 100 HP DC, nitrided barrel & screws, 200 hours, 3 component blender
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Kmd
KMD 125 mm Extruder, KMD 125 mm Extruder, 100 HP DC motor with Upgraded Controls. Barrel and Screws are Nitrided and C-56 but only have 200 Hours on them since new., This is a large Extruder includes a 3 Component Blender.
5" Davis #XP-Expess, 80" W sheet line, 34:1 L/D, Maguire WSB-940T gravimetric blender, Thermatic III, 13.85:1 gearbox ratio, 2009
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: XP EXPRESS
Year: 2009
Used 80" Wide Davis Sheet Line With 5" (130MM) 34:1 Extruder, New In 2009 Maguire WSB-940T Gravimetric Blender 5 Inch (130 mm), 34:1 L/D, Thermatic III, 13.85:1 Gearbox Ratio, Model 130MM45T, Water Cooled, 8 Barrel Zones, Vented Barrel, 300 HP (222 KW) AC Drive System, Yaskawa Drive With Line Choke, S.O. 36917 ...more
5" Prealpina, Single Screw Extruder, electrically heated, air cooled, 1100 lb./hr.
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Prealpina
used- prealpina 130 mm diameter single screw extruder, with a capacity of 1100 lbs/500 kgs./hr. electrically heated, air cooled. incl. die head and control panel. reported to have new screw and barrel. previous used on pe, pp and pet. our freight specialists can assist you with door to door transportation and all ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
5.11" Davis Standard, 30:1 L/D non-vented extruder, SCR Control, 6" continuous screen changer, 1997
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Year: 1997
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continuous screen changer but without Hyd pump. Gearbox is Serial #U7644, SO #58491, rated at 365 hp with 1.5" ...more
5.5" ICMA San Giorgio, twin screw extruder, 36:1 L/D, co-rotating, segmented screws, screen changer & pelletizer, overhauled
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used icma san giorgio 140mm twin screw extruder | 36:1 l/d | co-rotating | segmented screws | screen changer & pelletizer. segmented screws. reinforced gearbox & motor. electric panel overhauled in 2015, touch control added. incl. screen changer and dry pelletizing unit. previously used on ...more
JUST ADDED!
5.7" NGR #X-GRAN-145-HD, recycling pelletizing line, cutter-feeder extruder, X-C1200 single shaft shredder, 900-1000 kg/hr BOPP/CPP film
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Ngr
Model: X-GRAN-145-HD
NGR X:GRAN 145 HD RECYCLING LINE, NGR X:GRAN 145 HD RECYCLING LINE.
5.91" Huaxing #HXSJ-150-DWM11, Three-Stage PE/PP Pelletizing Extrusion Line, 600-1000 kg/hr., 30:1 L/D, 480 V., 2019
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Huaxing
Model: HXSJ-150-DWM11
Year: 2019
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6304), CAPACITY 1000 SCREW DIAMETER 150 L/D 30 VOLTAGE 480.
5.91" Windmoeller & Hoelscher #FILMEX, 3-Layer Cast Film Line, 102" film width, 1100 FPM, 106" die width, 47.2" rewind diameter, 6" core diameter, 2014
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Windmoeller&hoelscher
Model: FILMEX
Year: 2014
WINDMOLLER & HOLSCHER MODEL FILMEX 3 LAYER CAST FILM LINE, MFG 2014, FILM WIDTH 94.5"/240mm, MECHANICAL SPEED 1100FPM/350MPM, OUTPUT 2200LB/1000kg DEPENDING ON MATERIALS, LAYER 1 SCREW DIAMETER 90mm L/D 30, OUTPUT 770LB/350kg PER HOUR, 3 COMP GRAVIMETRIC DOSING MODULE G3 WITH VACUUM FEEDS, MAXIMUM SCREW RPM 250 ...more
JUST ADDED!
6" Black Clawson #6XTR, single screw extruder, side port feed
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Black Clawson
Model: 6XTR
Black Clawson 6XTR 6 Single Screw Extruder, Black Clawson 6XTR 6 Single Screw Extruder, Side Port Feed Extruder.
6" Black Clawson #6XTR-360, single screw side port feed extruder, 300 HP, 14.175:1 gearbox ratio, 24:1 L/D water cooled barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Black Clawson
Model: 6XTR
Used 6" Flender Gearbox, Model SZNE 360 14.175:1 Gearbox Ratio 654hp Catalog Rating S/N: 308342-1-1 *Previously Used on 6" Black Clawson Extruder.
JUST ADDED!
6" Davis Standard #600S, Thermatic extruder, 30:1 L/D, water cooled, non-vented, new 300 HP WEG AC motor & drive, 17.21:1 gearbox
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 600S
6 Davis Standard 30:1 300 HP AC Model 600S Thermatic Extruder, 6 Davis Standard 30:1 300 HP AC Model 600S Thermatic Extruder, 6 Davis Standard Model 600S Thermatic Extruder, 8 x 8 water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox ratio driven by a new WEG 300 HP AC motor, includes ...more
6" Davis Standard #600S-Thermatic, extruder, 30:1 L/D, 300 HP Westinghouse AC motor, 17.21:1 gearbox ratio, refurbished 2025
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 600S-THERMATIC
6" Davis Standard Extruder, 30:1 L/D, 300 HP AC Motor 30:1 L/D Ratio 17.21:1 Gearbox Ratio PE/PP Screw Model 600S Thermatic Refurbished 10 Zone Control Panel, 6 Barrel Zones, 4 Downstream Zones, New Eurotherm 3216 Temperature Controllers New 300 HP Westinghouse AC Motor New WEG AC Inverter Drive All Bearings Inside ...more
6" Davis Standard #Thermatic-60IN60, single screw extruder, water cooled, 42" centerline, 24:1 L/D, 400 HP Teco AC motor, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60
Year: 2004
Reconditioned 6" Davis Standard Single Screw Extruder, Model Thermatic 60IN60, 24:1 L/D, 400hp, New in 2004 Water Cooled Barrel, Water Reservoir with Recirculation Pump and Heat Exchanger 17.21 Gearbox Ratio, 424 hp Capacity with 1.5 Service Factor NEW 400hp Teco AC Motor, EPS4004, 1800RPM, 449TX Frame New TECO AC ...more
JUST ADDED!
6" Davis Standard #60IN60TPIH, extruder, 30:1 L/D, vented, 500 HP Reliance AC, 13.4:1 gearbox, 43" centerline, 460 V., 1998, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1998
6 Davis Standard 30:1 Extruder Rebuilt Mdl. 60IN60TPIH-500 HP, 6 Davis Standard 30:1 Extruder Rebuilt Mdl. 60IN60TPIH-500 HP, Rebuilt 6 Davis Standard Plastics Extruder Model 60IN60TPIH, MFG. 5/98, Approximate 43, centerline height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger ...more
6" Davis Standard #60IN60TPIH, Extruder, 30:1 L/D, air cooled vented barrel, 500 HP Reliance AC motor, 13.4:1 gearbox ratio, Eurotherm control, 1998
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1998
Used Davis Standard 60IN60TPIH (1998) Extruder for Sale. This unit has a 6.0″ screw with a 30:1 L/D ratio, air cooled barrel, vented barrel design, and eight cooling zones covering five zones. The gearbox ratio is 13.4:1 with new bearings, driven by a rebuilt 500 HP Reliance AC motor. Power requirement is 460 ...more
6" Davis Standard #60IN60TPIH, single screw extruder, 400 HP, 34:1 L/D, 42" centerline, 1994
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1994
Used 6" Davis Standard Single Screw Extruder, Model 60IN60TPIH, New in 1994 6" Davis Standard Single Screw Extruder, 34:1 L/D Water Cooled, 6 Cooling Zones Vented Barrel (Plugged) Vent Located 130" From Center of Feed Throat Cooling System Consists of 1/2hp Recirculation Pump, Heat Exchanger, 32" x 24" x 12" Water ...more
6" Davis Standard #60IN60TPIH, extruder, 30:1 L/D, 500 HP Reliance AC motor, 13.41:1 gearbox ratio, refurbished 2025
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60IN60TPIH
6" Davis Standard Extruder, 30:1 L/D, 500 HP AC Motor Vented Barrel, 30:1 L/D Ratio 13.41:1 Gearbox Ratio, Rebuilt PE/PP Two Stage Screw Model 60IN60TPIH Refurbished 12 Zone Control Panel, 8 Barrel Zones, 4 Downstream Zones, New Eurotherm 3216 Temperature Controllers New 500 HP Reliance AC Motor New AC Inverter Drive ...more
6" Davis Standard/Xalloy #60IN60TPTH, pelletizing line, 2011
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: 60IN60TPTH
Year: 2011
6" Davis Standard #60T, underwater pelletizing line, 32:1 L/D, water cooled barrel, 500 HP AC, PSI gear pump, Gala cutter & spin dryer, 2018
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 60T
Year: 2018
Used Davis-Standard 6" Pelletizing Line Consisting Of: (1) Davis-Standard 6" single screw extruder, model #60T, part# 002142519-1-I, year 2018. Approximate 32 to 1 L/D, water cooled 6 zone non-vented barrel, 500hp Reliance AC Motor,( 557amps) 21.42 gear ratio, 700 Hp Gearbox Capacity With 1.5SF @100RPM, Yaskawa GA800 ...more
6" Davis Standard, cold feed rubber extruder, 20:1 L/D, 300 HP, serial #05329,1999
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Year: 1999
One (1) Used Davis Standard 6" 150mm Cold Feed Rubber Extruder, 20:1 L/D, gearbox rated at 300 HP, gear driven PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, belt drive, no motor, S/N 05329, Date 1999.
JUST ADDED!
6" Davis Standard, extruder, 36:1 L/D, 400 HP DC, double vented, 8" slide gate screen changer, spare screw, spare DC drive & motor, 460 V., 1999
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Year: 1999
6 Davis Standard 36:1 -400 HP, 6 Davis Standard Extuder- 20 years old -so new about 2004., 400 HP DC motor and drive, but having gearbox rated for 500 HP., 36:1 L/D Ratio double vented barrel, one vent is plugged, DC motors and drives, Set up for water cooling,some heater bands have been replaced with cereamic heaters ...more
6" Davis Standard, cold feed silicone extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC, power feed roll
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Item 6116 - One (1) Used Davis Standard 6" (150mm) Cold Feed Silicone Extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC motor, power feed roll, straight delivery head, belt drive.
JUST ADDED!
6" Davis Standard Egan #6026-DRH, water ring pelletizing line, 44:1 L/D, vented, 400 HP DC, Berringer WRP36 pelletizer, Gala 600 GPM water system
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard Egan
Model: 6026-DRH
6 Davis Standard Pelletizing Line, Used 6 Davis standard Egan / Berringer water ring pelletizing line consisting of:, 6 Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump, 11.478:1 gearbox ratio, with 400 hp dc ...more
6" Davis Standard #600S-Thermatic, Single Screw Extruder, 300 HP, 30:1 L/D, 2025
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis-Standard
Model: 600S THERMATIC
Year: 2025
used & reconditioned davis-standard 600s thermatic 6" single screw extruder 300 hp, 30:1 l/d, reconditioned in 2025. s a 30:1 l/d ratio with a pe/pp screw and a 17.21:1 gearbox ratio. powered by a new 300 hp westinghouse ac motor with a new weg ac inverter drive. a refurbished 10-zone control panel consisting of ...more
6" Davis Standard #60IN60-Thermatic, Single Screw Extruder, 400 HP, 24:1 L/D, water-cooled barrel
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis-Standard
Model: 60IN60 THERMATIC
used & reconditioned davis-standard thermatic 60in60 6" single screw extruder 400 hp, 24:1 l/d, thermatic clamp. 24:1 l/d ratio, water-cooled barrel, integrated water reservoir, recirculation pump, and heat exchanger. a 17.21:1 gearbox rated for 424 hp capacity with a 1.5 service factor, powered by a new 400 hp ...more
6" Davis Standard #60IN60TPIH, Single Screw Extruder, 400 HP, 34:1 L/D, vented barrel, ABB Drive
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis-Standard
Model: 60IN60TPIH
used davis-standard 60in60tpih 6" single screw extruder 34:1 l/d, 400 hp, vented barrel with abb drive. s a 34:1 l/d ratio with a water-cooled, vented barrel incorporating six cooling zones; vent is located approximately 130" from the center of the feed throat and is currently plugged. cooling system includes a 1/2 hp ...more
6" Egan, 30:1 extruder, electrically heated, water cooled closed loop, serial #37910
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Egan
JUST ADDED!
6" Egan, single screw extruder, 24:1 L/D, electric, 6 zones, non-vented, 750 HP
Plantex Equipment Co | Alvin, TX
Category: Extruders and Extrusion Lines
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Egan
6" Ensine, cold feed silicone extruder, 8:1 L/D, power feed roll, straight delivery head
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Ensine
One (1) Used Ensine 6" (150mm) Cold Feed Silicone Extruder, 8:1 L/D, 100HP 1750RPM 500VDC motor, power feed roll, straight delivery head.
6" Gloucester #266-001, water ring pelletizing line, 30:1 L/D, air cooled, jacketed feed section, feed hopper, 1990
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: 266-001
Year: 1990
Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed hopper, vented barrel, with control panel, machine serial# 266-33392-01, built 1990. Gneub rotary filter screen changer, model SF90, serial# 1190-866. ...more
6" Gloucester, single screw extrusion line, Nordson WRP12V water ring pelletizer, 1990
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
Year: 1990
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer 6" Gloucester Single Screw Extruder, 30:1 L/D Ratio, Vented Barrel 11.48:1 Gearbox Ratio, Air-Cooled Barrel Using Contracool Blower, 300 HP DC Motor With Safetronics DC Drive 18" L x 7" W Tangential Feed Throat, Model 266-001 New In 1990 460/3/60 ...more
6" Huaxing #150-DWM11, 3-Stage Plastic Extrusion Line, for PE & PP, 30:1 L/D, 600-1000 kg/hr., 5.9" x 177.2" Primary & 5.9" x 70.9" Secondary Extruder, 480 V
Alan Ross Machinery Corp | Zion, IL
Category: Extruders and Extrusion Lines
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Huaxing
Model: 150-DWM11
Year: 2019
6" 30:1 L/D PE and PP Extrusion Line, System includes: Crusher / compactor with infeed conveyor with control panel, Two stage plastic extruder:, 1) 150mm x 4500mm (30:1) primary, double vented with vacuum system & 2 stage, filtration, 2) 150mm x 1800mm (12:1) secondary, single vented with 2 stage filtration ...more
6" Merritt Davis #Polycycle-MS, ram stuffer extruder, 600 HP, 36:1 L/D, 7 barrel zones, 125 RPM, 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Model: POLYCYCLE-MS
Year: 2001
Used 6" Merritt Davis Standard Ram Stuffer, Model Polycycle MS Series, 600 Hp 36:1 L/D Ratio, Vented, 7 Barrel Zones, Air Cooled, 4 Die Zones, 14:1 Gearbox Ratio, 125 Max RPM, 600 HP DC Motor With Control Techniques Drive and Eurotherm Temperature Controls Wide Mouth Rectangular Grooved Feed, Pneumatically Operated ...more
JUST ADDED!
6" Merritt Davis, extruder, 36:1 L/D, vented, 18" side stuffer, 600 HP DC, Allen Bradley SLC 5/03 PLC, Condex hot face cutter, feed conveyors
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Merritt Davis
6Merrit Davis 36:1 Extruder w/Side Stuffer, Merritt Davis 6 Extruder. 36:1 L/D. Vented barrel with 18 air operated side stuffer. Air-cooled. 600HP DC motor with Control Techniques drive. Control cabinet with Allen Bradley SLC 5/03 PLC and Cutler Hammer Panel Mate HMI. Has original wiring diagrams as well as PLC and ...more
JUST ADDED!
6" NRM #PM-III, extruder, 30:1 L/D, vented, air cooled, 8 zone barrel, new 400 HP AC motor & drive, 12 zone panel, 43" centerline, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
Model: PM-III
6 NRM PM III -30:1 VENTED AIR COOLED EXTRUDER, 6 NRM PM III -30:1 VENTED AIR COOLED EXTRUDER, 6 NRM PM III -30:1 VENTED AIR COOLED EXTRUDER, REBUILT approximately 43 centerline height, gearbox having new bearings and seals with cooling system new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast aluminum heaters ...more
JUST ADDED!
6" NRM #PM70, strand pelletizing line, 125 HP AC, 21 strand die, 6" screen changer, 25' Stainless Steel water bath, 20 Ton chiller, Reiter pelletizer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
Model: PM70
6 NRM COMPLETE STRAND PELLETIZING LINE OUTSTANDING PRICE !!!!, 6 NRM Model PM 70 Strand Pelletizing Line with open vent with pressure gauge and rupture disc. Two Stage Screw. Main Control Panel. Long gated Feed Section., 125 HP AC Motor and Drive with Drive rated 125 HP 150 HP. Drive in separate Control Panel. Color ...more
JUST ADDED!
6" NRM, extruder, 30:1 L/D, vented, air cooled, 8 zone barrel, 400 HP Baldor Reliance AC, new WEG drive, 12 zone panel, 43" centerline, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
6 NRM 30:1 Air Cooled Vented Extruder Rebuilt, NOTE: We are rebuilding so photo shows as is now with extruder stripped down. Taking deposit now to hold machine., 6 NRM Extruder, Approximate 43 centerline height, gearbox having, new bearings (less thrust) and seals with cooling system new heat exchanger and pump, 30:1 ...more
JUST ADDED!
6" NRM, extruder, 30:1 L/D, vented, air cooled, 8 zone barrel, new 400 HP WEG AC motor & drive, 12 zone panel, 43" centerline, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
6 NRM Rebuilt Extruder w/New 400 HP AC motor & Dr. 30:1 Vented, SPECIAL 6 NRM Plastics Extruder Rebuilt- approximately 43 centerline height, gearbox having new bearing (less thrust) and seals with cooling unit, heat exchanger, pump and motor, 30:1 L/D 8 zone barrel, new cast aluminum heaters, air cooled and vented ...more
JUST ADDED!
6" NRM, extruder, 30:1 L/D, vented, air cooled, 8 zone barrel, 400 HP US Motors AC, WEG CFW11 drive, 14 zone panel, 43" centerline, Reconditioned
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
6 NRM 30:1 Vented Air Cooled 400 HP Extruder, 6 NRM 30:1 Vented 400 HP Extruder, 6 Nrm Reconditioned Extruder 30:1 L/D VENTED 43 centerline height, new gernox seals, complete with gearbox cooling; heat ecxchanger, pump and motor 30:1 L/D 8 zone barrel, rewired cast aluminum heaters, AIR COOLED VENTED BARREL, rebuilt ...more
6" NRM, hot feed rubber extruder, 20.5:1 G/B ratio, 100 HP DC, 500 V., 1980
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1980
One (1) Used 6" NRM Hot Feed Rubber Extruder, Motor Reliance 100 HP DC, 500 volt, 1750/2000 rpm, Gearbox ratio 20.5:1, Date 3-80, Order 107982-02, S/N 28160.
6" OMV #D140-6P, sheet extrusion line, air cooled, 350 HP, 8" dual roll screen changer, (3) chill rolls, Siemens Control, 2001
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Omv
Model: D140-6P
Year: 2001
Used OMV D140-6P (2001) Extruder for Sale. This 48″ wide PET sheetline is built around a 6″ screw driven by a 350 HP motor, with (8) cooling zones, air cooling, and 16 HP cooling capacity. It runs on a 30 HP Yaskawa GA800 drive with an MSDP-30 gear pump on a 30 HP motor, and includes an 8″ dual roll ...more
6" PTI #6000, Single Screw Extruder, 400 HP, 30:1 L/D, WEG drive, flender gearbox
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Pti
Model: 6000
used pti 6000 6" single screw extruder 400 hp, 30:1 l/d, weg drive & flender gearbox. s a 30:1 l/d ratio with an air-cooled barrel, seven barrel heating zones, and sixteen downstream heating zones. driven by a 400 hp weg ac motor with weg cfw-11 inverter drive and a flender model sznf 390 gearbox featuring a ...more
JUST ADDED!
6" Sterling, extruder, 30:1 L/D, vented, air cooled, 400 HP DC, gearbox rebuilt 2011, new screw
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
6 Sterling/Davis Extruder 30:1 VENTED Extruder 400 HP, 6 Sterling / Davis Standard 30:1 VENTED Extruder 400 HP, 30 to 1 L/D ratio air cooled barrel, 400 HP DC motor, Gear box rebuilt in 2011, Plant said they recently put a new screw on it.
JUST ADDED!
6" Sterling, single screw extruder, 24:1 L/D, electric, 6 zones, 300 HP
Plantex Equipment Co | Alvin, TX
Category: Extruders and Extrusion Lines
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Sterling
6" Troester / Monsanto cold feed rubber extruder, 18:1 L/D, 250 HP, power roll feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Troester
One (1) Used Troester / Monsanto 6" 150mm Cold Feed Rubber Extruder, 18:1 L/D, 250 HP, 1750 RPM, 500V DC motor, straight delivery head, pneumatic clamp, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, S/N 760805.
6" Welex #6.0 30D, extruder, 30:1 L/D, 500 HP Reliance AC Motor, Air-Cooled, Vented Barrel, 6 Barrel Zones, 9 Die Zones, Koellmann gearbox
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 6.0
6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Driven To 8.7:1 Koellmann Gear Box, With 500 HP Reliance AC Motor, (200 Screw RPM), Tempco Cool Touch Heater Bands, Vented & Plugged Barrel, Vent Located Approx. 120" From Center Of Feed Throat, 10" L x ...more
6" Welex #6.0-30D, Single Screw Extruder, 500 HP, 30:1 L/D, Vented Barrel, Dynisco Hydraulic Screen Changer, 460V, 3 Ph., 60 Hz
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: 6.0-30D
used welex 6.0 30d 6" single screw extruder 500 hp, 30:1 l/d, vented barrel with dynisco hydraulic screen changer. featuring a 30:1 l/d ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. six barrel heating zones, nine die heating zones ...more
6" Welex, single screw extruder
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Welex
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6016).



















































