51 - 100 of 358 listings
1.57" Keifel #CA4, lowboy Blown Film Line, 30 HP, 24:1 L/D, air cooled, 7 zones, w/ conversion parts to 30:1 L/D, 1989
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: CA4
Year: 1989
used- keifel 40 mm blown film line, model ca4, 24:1 l/d. lowboy extruder having an electrically heated, air-cooled barrel. a second complete barrel, screw, and heaters are included to convert the machine to a 30:1 l/d ratio. gearbox is belt driven by a 30 hp reliance d/c motor with scr control. includes hopper, water ...more
1.6" Kiefel Technologies Lowboy, Extruder, air cooled, Kirion C Control, die w/ cart, calibration cage #M1000-C, motorized adj, HMW-HDPE up to 1000 mm @ 0.25-6 mil, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiefl
Model: M1000-C
Year: 1997
40mm Kiefel Lowboy Extruder, 26:1 L/D, With Die, Rotating Cart Calibration Cage and Takeoff Air Cooled Extruder, 3 Barrel Zones, 42 HP AC Vector Drive Extruder Controlled With Kirion C Automation, 15" Touch Screen Display Extruder Comes With BD Plast Manual Screen Changer(New In 2014) 80MM Die With Spare Pins Techflow ...more
1.6" Werner & Pfleiderer #ZSK-50-MCC, twin screw extruder, 920-1056 RPM, w/ side feeder, 34,432 hours, 2000
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK-50-MCC
Year: 2000
used coperion werner & pfleiderer zsk 50 mcc twin screw extruder 40mm high-speed compounding system with side feeder, co-rotating, (2) 40 mm diameter side by side screws, 54:1 l/d ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. driven by a 181 kw (242.72hp) - 470 volt dc ...more
1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 40:1 LD, 43" centerline, 588 RPM, w/ feeder, spare motor & gearbox
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK20
used-20mm werner & pfleiderer model zsk20 co-rotating twin screw extruder. has 40/1 l/d barrel at 43" centerline height driven through a 3:1 gearbox with a 37-newton meter torque capacity per screw shaft. extruder is powered by 5 hp ac motor with allen bradley 1336 impact drive unit, 588 rpm screw speed. includes ...more
1.6" Werner & Pfleiderer #ZSK20, Co-Rotating twin screw extruder, 46:1 LD, 41" centerline, 517 RPM, w/ feeder, 1990
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK20
Year: 1990
used-werner & pfleiderer model zsk40, 40mm co-rotating twin screw extruder. 1990 model year. 46:1 l/d vented barrel with 11-barrel sections and a 41" centerline height. driven by 50 hp 500 volt 1750/2100 rpm dc motor with scr control and with a screw speed of 517 rpm. includes acrison 1.5 hp weight loss ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
1.6" Werner & Pfleiderer #ZSK40, co-rotating twin screw extruder, 46:1 L/D, 50 HP, 1990
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Werner & Pfleiderer
Model: ZSK40
Year: 1990
Used 40mm Werner & Pfleiderer co-rotating Twin Screw Extruder. Model ZSK40, serial #180399, new 1990. Has 46/1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC motor with SCR control and with a screw speed of 517 rpm. Includes Acrison 1.5 hp weight ...more
1.6" Cissco Machinery #ABS-40/28, strand extrusion line w/ single screw extruder, 28:1 L/D, 10 HP, 112' L tank, 55" H centerline, 480 V., 2014
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: ABS-40/28
Year: 2014
Used 40 MM Cissco Machinery Co strand extrusion with 40 MM Cissco Machinery single screw extruder, model ABS 40/28, 28:1 L/D, air cooled barrel, jacketed feed section, driven byt 7.5 kw, 480 volt motor, 55" centerline height, with Wensui vacuum loader, model WS, approximately 112' long stainless steel trough ...more
1.6" Keifel LowBoy #CA4, extrusion blown film line, 24:1 L/D, electrically heated, air cooled barrel
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Model: CA4
Keifel model CA4 40mm 24:1 L/D lowboy extrusion blown film line consisting of:, A) Extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. ...more
JUST ADDED!
1.75" Davis Standard #35-IN-35, extruder, .5 HP, 3450/2850 RPM, 1.5/.75 A, VS power module, digital displays, 240/480 V., 1992
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Davis-Standard
Model: 35 IN 35
Year: 1992
DIGITAL DISPLAYS, VS POWER MODULE, 1.75” BORE,.5 HP, 3450/2850 RPM, 1.5/.75 A.
JUST ADDED!
1.75" Egan Machinery #H-2515-H, extruder, 50 HP, 10,000 PSI, 1750/2100 RPM, digital displays, 150/300/500 V.
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Egan Machinery
Model: H-2515-H
DIGITAL DISPLAYS, 10000 PSI, 1.75” BORE, 50 HP, 1750/2100 RPM, 4-2.6/2-1.3/83.7 A.
1.77" Kiwex #SJ65/25, pedestal extruder, 25:1 L/D, 56" centerline, Omron E5EC temperature controllers, 2021
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiwex Machinery
Model: SJ65/25
Year: 2021
Used 65mm Kiwex Extruder, 25:1, Air Cooled, 2021 Vintage, 25 HP AC Motor 4 Barrel Zones, 2 Die Zones, Omron E5EC Temperature Controllers Model SJ65/25 ABB AC Inverter Drive, Model ACS550-01-045A-4 New In 2021, S/N KWX2210836-1 460/3/60 Includes Screw And Hopper Machines Has A 53" Centerline Has A Motorized Base Raise ...more
1.78" Theysohn #TSK-N-045, Co-Rotating Twin Screw Extruder, 45mm, 500 RPM, 50 HP, variable speed Gearbox, 36:1, Side Feeder, PLC, Emerson Digitax ST Plus DC dr module.
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: TSK-N-045
used- theysohn 45mm co-rotating twin screw extruder, type tsk-n 045. 45mm (1.77") diameter; 36:1 l/d; 8 housing sections and 1 die zone; electrically heated, water cooled. max screw speed 500 rpm via a 50 hp/37.5 kw piv variable speed gearbox, type 2n40110, by a 60 hp/44.7 kw 500v dc, 105a, continuous duty, 1750/2100 ...more
2" Berlyn, non-vented water & air cooled extruder, 30:1 L/D, 6-zone electrically heated
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Berlyn
Used 2 Berlyn Single-Screw Extruder, 30:1 L/D, Manufacturer: Berlyn, Serial: 025D379, Barrel: non-vented, 6-zones, electrically heated, water cooled, 42 centerline height, Belt driven by a 40 hp DC motor, 460 volt, with Allen Bradley Model 1395 SCR through a Koellmann gearbox, Gearbox: size PEZS 312, 19.95:1 reduction ...more
2" Buhler #BTSK-30/40D, Twin Screw Extruder, 50 mm Co-Rotating, 11 barrel, 800 RPM,
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Buhler
Model: BTSK-30/40D
used- buhler btsk 30/40d twin screw extruder, 2 x 50 mm diameter side by side screws, 53:1 l/d ratio, 11-barrel sections, electrically heated water cooled. driven by a 21 kw(31.5hp)-440-volt ac drive motor via a gear box. screw speed maximum 800 rpm. frame mounted, control panel. weight 1540 lds/700 kgs. extruder: ...more
2" Davis Standard, single screw extruder, 35 HP, 100 RPM, 17.58:1 ratio, 131,400 lb. thrust, 2014
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: New Philadelphia, OH
Mfr: Davis Standard
Year: 2014
The Davis-Standard model 20, manufactured in 2014 by Davis-Standard, LLC, is an industrial machine featuring a power capacity of 35 HP (26 kW) and a service factor of 1.25. This unit is designed for an extruder speed of 100 RPM with a gear ratio of 17.58. It provides a dynamic thrust capacity of 131,400 lb (59,600 ...more
2" Davis Standard, super blue single screw extrusion line, 24:1 L/D ratio, air cooled barrel, 42" centerline, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2019
Davis Standard Monofilament Line Line Consists Of The Following Pieces: Used 2.0” Davis Standard Super Blue Single Screw Extruder, New In 2019 24:1 L/D Ratio, Air Cooled Barrel 3 Barrel Zones, 5 Die Zones 17.56:1 Gearbox Rated To 35 HP Clamp 20 HP 1000:1 AC Motor With 20 HP Yaskawa AC Inverter Drive DS-TPC II ...more
2" Davis Standard, extruder, 2" x 47.5" barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2" Barrel For Davis Standard Extruder Barrel Length: 47.5" OD: 4" ID: 2" Drive End Flange: 6.25" Bolt Pitch, 4 Bolt Holes Screw End Flange: M12-1.75 Thread Size, 8 Holes.
JUST ADDED!
2" Davis Standard Thermatic #35IN35, extruder, 158 HP, 10,000 PSI, 600°, 3 Ph., 230/460 V., 1993
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Davis-Standard Thermatic
Model: 35IN35
Year: 1993
10,000 PSI, 600 DEGREES, 25K AMP.
JUST ADDED!
2" Johnson, extruder, 24:1 L/D, 25 HP, water cooled, 4 zones, electric heat
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Johnson
ITEM NO : 100491 QTY : 1 MANUFACTURER : JOHNSON SCREW DIAMETER : 2" L/D : 24:1 HP : 25 COOLING : WATER NO. OF ZONES : 4 HEAT TYPE : ELECTRIC VENTED : NO CONTROL TYPE : NO SCREEN CHANGER Y/N : N.
2" Rheotec, extruder, 24:1 L/D ratio, 20 HP DC motor, 4 barrel zones, air cooled, 2 die zones, Fr.259AT, stand w/ casters
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rheotec
Used 2” Rheotec Extruder, 24:1 L/D Ratio, 20 HP DC Motor 4 Barrel Zones, Air Cooled, 2 Die Zones 20 HP Powertron DC Motor, Model: 2590B452B04, Motor S/N: M4-18204-2-jh047 500 ARM Volts, 35A 150/300 Field Volts, 2.48A/1.24A 1750 RPM Frame 259AT Cutler-Hammer Respondor DC Drive, No. GA210TC55-A Supply: ...more
2" Royle, cold feed rubber extruder, 12:1 L/D, 15:1 G/B ratio, forced lube system, straight delivery head
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royle
Item 6008 - One (1) Royle 2.0" 50mm Cold Feed Rubber Extruder, 12:1 L/D, 15:1 G/B ratio, No motor, Reliance 15 HP 460 VAC drive with controls, straight delivery head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
2" Sterling plastic extruder, 24:1 L/D, 25 HP, 1750 RPM, 240 VAC motor
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Sterling
Item 6524 - One (1) Used Sterling 2" 50mm Plastic Extruder, 24:1 L/D, 25 HP 1750 RPM 240 VAC motor.
2" Welex #200-24-1, single screw extruder
Platinum Asset Services | Scarborough, ON
Category: Extruders and Extrusion Lines
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Welex
Model: 200-24-1
WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER, WELEX 200 24:-1.
2" Xinda #PSHJ-50, twin screw compounding extruder line, 500 RPM, 460 V., 3-phase, 2007
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: PSHJ-50
Year: 2007
Make: Xinda, Model: PSHJ-50, Year: 2007, Machine Location: Ohio, Model: PSHJ-50, Barrel Diameter: 50mm, L/D Ratio: 40:1, Output Capacity: Approx. 500 kg/hr (material dependent), Screw Speed: Up to 500 RPM, Main Motor: 45 kW, Heater Power: 28 kW, Water Pump Power: 0.55 kW, Power: 460V / 60 Hz / 3-Phase, s:, Parallel ...more
2.1" NFM Welding Engineers, side feed extruder, 2 HP, no barrel or screws
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 53mm NFM Welding Engineers side feed extruder with no barrel or screws. Has Koellmann gearbox, size CG14-0-201, serial #1227336/1, with 5.06/1 ratio, service factor 1.0, input rpm 1750, output rpm 350, rating 3.15 hp. Driven by a 2 hp motor, 460 volt. On caster mounted cart. No controls included., KOELLMANN ...more
2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE 50 GG
Year: 1997
55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more
2.2" Cincinnati Milacron #CM-55, conical twin screw extruder, 25:1 L/D, 40 HP, oil cooled, vacuum vented, 1997
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Cincinnati Milacron
Model: CM-55
Year: 1997
Used Cincinnati Milacron CM-55 (1997) Extruder for Sale. This conical twin screw extruder has a 55mm screw size with a 25:1 L/D ratio, driven by a 40 HP motor through a 59:1 gearbox. It is a heat transfer oil cooling arrangement and a vacuum venting system, with machine functions handled through a CPU console control. ...more
2.3" Werner & Pfleiderer, co-rotating twin screw extruder, 16:1 L/D, 25 HP DC,
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Year: 1986
One (1) Used Werner & Pfleiderer 58mm Twin Screw Extruder, twin screw compounder, continuous mixer, 16:1 L/D, Type Continua 58, Reliance Motor 25HP DC 1750RPM 500V, Gearbox rated for 40HP, co-rotating, 3 heating zones, electrically heated, water cooled, vented, control panel and pump included, previously extruder ...more
2.36" Battenfeld Cincinnati #Techbex-1-60-25D, single screw extruder, 25:1 L/D ratio, air cooled, RKC CH402 temperature controllers, 2013
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Battenfeld Cincinnati
Model: TECHBEX 1-60-25D
Year: 2013
Used 60MM(2.36") Battenfeld Cincinnati Extruder, Model Techbex 1-60-25D Single Screw Extruder, 25:1 L/D Ratio, Air Cooled 15.56:1 Nord 6282A2 2XHF/4 Gearbox, 30HP Nord AC Motor With 200XH/4F Drive, 119 Screw RPM, 4 Barrel Zones, 7 Die Zones AMP Gauge, Speed POT RKC CH402 Temperature Controllers Brand New MPI MPC9610 ...more
2.36" Berstorff, co-rotating twin screw extruder, 34:1 L/D ratio, 500 RPM screw speed, 200 HP Reliance VXS AC Inverter Duty motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Berstorff
Model: ZE 60A
Year: 1997
"60MM Berstorff Co-Rotating Twin Screw Extruder, 34:1 L/D Ratio, 500 RPM Screw Speed 7 Barrel Zones, Vented At Barrel Zone 4 and 6 1 Screen Changer Zone Electrically Heated, Water Cooled 200 HP Reliance VXS AC Inverter Duty Motor S/N 90-2-E0.8765/97 Order Number 1242 HUT New In 1997 No Drive Or Temperature Control ...more
2.36" Krauss Maffei #KMD-2-60/KK, counter rotating conical twin screw extruder, 50 HP, 37.5 RPM, 4 barrel/9 die zones, 39.5" centerline, 460 V., 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Krauss Maffei
Model: KMD 2-60/KK
Year: 2001
Used 60mm Krauss Maffei Counter-Rotating Conical Twin Screw Extruder, 50 HP Model: KMD 2-60/KK Screw Diameter: 2.36"–4.92" (60–125 mm) Maximum Screw Speed: 37.5 RPM 4 Barrel Zones, 9 Die Zones 15.5 kW Max Barrel Heating Capacity 3 Zone Closed-Loop Oil Cooling w/ Water-Cooled Heat Exchanger, Water Pump ...more
2.36" Leistritz #ZSE-60-GL, Twin Screw Extruder, liquid cooled, 36:1 L/D, 150 HP, 9 zones, Side Stuffer, extra parts
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-GL
used leistritz zse-60 gl twin screw extruder 36:1 l/d, 150 hp, side stuffer, strand dies, screws & spares. with (9) modular barrel sections. 114 kw / 150 hp baumueller dc motor, 500 rpm max. screw speed, barrels are electrically heated and internally cored for liquid cooling. includes stand-alone electrical ...more
2.36" Leistritz #ZSE-60-GL-36D, Twin-Screw Pelletizing Extrusion Line, 9 barrel segments, 8-hopper blender, 250 HP, 2000 RPM, 2001
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Leistritz
Model: ZSE-60-GL-36D
Year: 2001
Used Leistritz 250 HP Twin Screw Pelletizing Line, 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 250 HP 1750/2000 RPM with Bath, 8 Hopper Blender, Stainless Steel Holding Tank, Air Systems, Pelletizer, Air knife, Witte classifier, Panel, Co-Rotating, 9 Barrel Segments, With 4* SCHEER BAY PELLETIZER MDL. SGS-100E ...more
2.36" Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, 121 KW Baumuller Shunt Wound DC motor, 10 zone Control panel w/ Eurotherm 2208 temperature ctrlrs
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE-60-GL-36D
Used 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 121KW(162 HP) Co-Rotating 500 RPM Screw, 36:1 L/D Ratio, 9 Barrel Segments, With 40 MM Side Feeder Vent In Zone 4, Side Feeder In Zone 5 10 Zone Control Panel With Eurotherm 2208 Temperature Controllers 121KW(162) HP Baumuller Shunt Wound DC Motor Allen Bradley DC ...more
2.4" Gloucester, extruder, 32:1 L/D, side vented, top center feed throat, 1986
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gloucester
Year: 1986
Used 2.36 (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45 centerline height. Includes temperature control panel and 5-hole strand die., 1986 GLOUCESTER 60mm.
2.4" Leistritz #ZSE-60-MAX, Co-Rotating twin screw extruder, 62" L, 400 RPM, 20:1 L/D, liquid cooled, Sinamics Control, w/ wheels & adj feet, 480 V., 3 phase
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAX
used leistritz 60mm zse maxx twin screw extruder, type zse60maxx-20d. (2) co-rotating screws approximately 2.44" diameter x 62" long. speed 400 rpm. approximate 20 to 1 l/d ratio. 4 barrel sections, 1 feed section. liquid heated and cooled. 4-cooling zones. screws driven by a 121kw (160hp), 1600 rpm motor thru a ...more
2.4" Leistritz #ZSE-60-MAXX-36D, Twin Screw Extrusion Line, co-rotating, 60mm, Pelletizing System, 1200 RPM, 742 HP, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-36D
Year: 2014
used leistritz zse 60 maxx-36d twin screw extrusion line with pelletizing system 495 kw drive auction asset. line consists of (1) koch technik feeding system & scholz dosiertechnik dosing unit, (1) leistritz twin screw extruder, type zse 60 maxx-36d. (2) 60 mm) diameter screws. 36:1 l/d ratio. co-rotating. ...more
2.4" Leistritz #ZSE-60-MAXX-44D, Twin Screw Extruder, 60 mm, 1200 RPM, 10 barrel, Co-Rotating, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-44D
Year: 2018
used- leistritz twin screw extruder, type zse 60 maxx-44d. (2) 60 mm) diameter screws. 44:1 l/d ratio. co-rotating. 10-barrel housing section electrically heated, water cooled. (2) degassing port. maximum screw speed 1200 rpm via a flender gearbox is direct driven via a 400volt/50cycle/3ph motor. incl. control panel. ...more
2.4" Noris #ZSC-60, Twin Screw Extrusion Line, 650-800 kg/hr Polymer Compounding, water cooled, 746 RPM,
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Noris
Model: ZSC-60
used- noris zsc 60 twin screw extrusion line with a capacity of 650 800 kgs/hr. consisting of: noris zsc 60 twin screw extruder, (2) 60 mm diameter screws, 40:1 l/d ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. driven by a 400volt drive motor via a ...more
2.44" Maplan #DSK62, counter rotating conical twin screw extruder, 40 HP, 1990
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: DSK62
Year: 1990
Used 62mm Maplan Counter Rotating Conical Twin Screw Extruder, Model DSK 62 4 Barrel Zones, Oil Zone, 7 Die Zones with Eurotherm 808 Temperature Controllers 72:1 Dorstener NSDEN 160 So Gearbox 40 HP Emerson Motor, ABB DCS 800 DC Drive 1 HP Starve Feeder 460/3/60 - 200 AMP Disconnect 40.5" Centerline Vented Barrel - ...more
2.5" American Kuhne #AK-250-30:1-A/C-EXT, Extruder, 30:1 L/D, 460 V., 2006
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: American
Model: AK 250 30:1 A/C EXT
Year: 2006
4000 RPM, 20 A, MADE IN USA.
2.5" Bonnot, Single Screw Extruder, 48" long jacketed, 1978
Quantum Technology | Shippensburg, PA
Category: Extruders and Extrusion Lines
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Bonnot
Year: 1978
Item Dimensions - L X W X H - 78X36X56Item Weight-500lb1508AAExperience enhanced productivity with the Bonnot Single Screw Extruder, perfect for your manufacturing needs. This robust machine boasts a 2.5-inch diameter by 48-inch long screw, making it ideal for a variety of extrusion processes. The fully jacketed ...more
2.5" Davis Killion #Hot-Melt-Rubber, Extruder, 12.8:1 L/D, 40 HP
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Killion
Model: HOT MELT RUBBER
Used Davis Killion Hot Melt Rubber Extruder for Sale. This 2.5″ screw extruder has a 12.8:1 L/D ratio and is air cooled, with (3) cooling zones and (2) die zones. Drive is a 40 HP DC motor, with Eurotherm controls and an amp meter. The machine is melt pressure and a roll feed section for rubber, and shows 900 ...more
2.5" Davis Standard #250SII, single screw extruder
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: Spring Lake, MI
Mfr: Davis Standard
Model: 250SII
2.5" Davis Standard #25IN25, extruder, 30:1 L/D, 75 HP WEG AC motor, 17.26:1 gearbox ratio, 5 barrel & 5 die zones, Yaskawa F7 drive, AB PLC, 2008
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 25IN25
Year: 2008
Used 2.5" Davis Standard 25IN25 Extruder, 30:1 L/D, 75 HP AC Motor 5 Barrel Zones, 5 Die Zones, 75 HP WEG AC Inverter Duty Motor 17.26:1 Gearbox Ratio Yaskawa F7 Drive Allen Bradley PLC Control 125 AMP Disconnect 460/3/60 *Spare Barrel New In 2008 Includes Xaloy MSDP 183 Melt Pump Drive Through 30.22 SEW-Eurodrive ...more
2.5" Davis Standard #25IN25, cold feed rubber extruder, 20:1 L/D, 17.26:1 G/B, 40 HP, 1994
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: 25IN25
Year: 1994
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced lube system, clutch driven roller feeder assembly, PFR power feed roll, adjustable scraper blade ...more
2.5" Davis Standard #DS2.5MS, extruder, 24:1 L/D, Air Cooled, 40 HP DC motor, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS2.5MS
Year: 1985
Used 2.5" Davis Standard Extruder, 24:1 L/D, Air Cooled, 40 Hp DC Motor, Belt Driven (60Hp Gearbox Capacity, With 1.25 S.F.) 3 Barrel Zones, 2 Die Zones 42" Centerline Bardac DC Drive, PowerPLX 40/99 7.42/1 Gearbox Ratio 460/3/60, 106A Watlow Temperature Controllers, Mercury Relays, Amp Meter, RPM Gauge With Clamp And ...more
2-1/2" Davis Standard #Super-Blue, extruder, 24:1 L/D, air cooled, 40 HP, PLC touch screen, 2009
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: SUPER BLUE
Year: 2009
Used Davis Standard Super Blue (2009) Extruder for Sale. This air cooled extruder runs a 2.5″ screw with a 24:1 L/D ratio and is driven by a 40 HP motor. Temperature is managed through a PLC touch screen controller. The machine is a Davis Standard pedestal style co-extruder (2009) with a 1.25″ screw size ...more
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, Maddox mixer
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Maddox Mixer 76" Overall Length.
