15 Results
2" Welex #200-24-1, single screw extruder
Platinum Asset Services | Scarborough, ON
Category: Extruders and Extrusion Lines
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Welex
Model: 200-24-1
WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER, WELEX 200 24:-1.
JUST ADDED!
2.5" Welex 2.5 RHNV Extruder, Air-cooled Barrel, 24:1, SCR Control, 9.38:1, 1992
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Welex
Year: 1992
Make: Welex, Model: 2.5 24:1 RHNV, Year: 1992, Machine Location: California, Screw Diameter: 2.5″, Length-to-Diameter Ratio: 24:1, Motor Power: 40HP DC Motor, Gearbox Ratio: 9.38:1, Barrel Cooling: Air Cooled, Heating Zones: 3, Barrel Type: Jacketed With Electrical Heaters, Screen Changer: Hydraulic, Control ...more
3" Welex #HS-3.0-40D-SV, Single Screw Extruder, water cooled, 40:1 L/D, 1520 RPM, 550 HP VFD Drive, Vented Barrel, 480 V., 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: HS-3.0-40D-SV
Year: 2009
used welex hs 3.0 40d sv single screw extruder | 3" screw | 40:1 l/d | 1520 rpm | 550 hp vfd drive | vented barrel. 1520 rpm max. screw speed. electric heated, air cooled barrel. vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. touch screen operator control. ...more
3.5" Welex, Shank Extrusion Screw, 24:1 L/D Ratio, 3/4" width x 6-7/8" L x 3/8" H keyway, 3.5" x 3.5" x 100" overall
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 3.5"
Used 3.5" Welex Shank Extrusion Screw, 24:1 L/D Ratio Diameter at Feed Opening : 3.484", Diameter at Center of Screw: 3.434", Diameter at Die end: 3.490" Keyway Dimensions L: 6-78" W: 3/4" H: 3/8" Screw weighs Approximately 250 Lbs, Approximate Dimensions L: 100" W: 3.5" H: 3.5".
3.5" Welex #350-30:1-LHV, single screw extruder, screen changer & melt pump, 56" centerline, 30:1 Water Cooled Barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 350-30:1-LHV
Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp Water Recirculation Pump with Heat Exchanger 56" Centerline Yasakawa A1000 AC Drive - 460/60/3 - 207Amps ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
3.5" Welex #350-RHNV, extruder, 75 HP, 24:1 L/D, 11.8:1 ratio 153 HP Welex PEZS36.width gearbox, 42.5" centerline
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 350-RHNV
Used 3.5" Welex 24:1 Extruder Model 350 RHNV S/N: 24255784 Belt Driven, 11.8:1 Ratio 153HP Welex PEZS36.W Gearbox, 42.5 Centerline Height, Square Feed Throat, Air-Cooled Barrel Screw and Hopper Included, Clamp Barrel Flange 75HP DC 1750 RPM WER Industrial Electrostat Motor Fan Cooled Emerson Spectrum Drive, NEW Novus ...more
4.5" Welex #4.5-30:1D, extruder, 30 L/D ratio, 11.7:1 gearbox ratio, 350 HP motor, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 4.5-30:1D
Year: 1999
Used 4.5" Welex, Model 4.5 30:1 D, 30 L/D Ratio, 11.7:1 Gearbox Ratio, 350HP 350HP Baldor AC Motor 6 Barrel Zones, 8 Die Zones Rectangular Throat Feed (6.5" x 5.5") 2208 Temperature Controllers Dynisco Pressure Readout ABB ACS880 AC Drive Approx. 30 HP Melt Pump Driven By SEW Gearbox Mixed Solid State & Mercury ...more
4.5" Welex, extruder, 30:1 L/D, 250 HP AC motor, hydraulic screen changer, 42" centerline, Fr.449T, TEFC, 1.25 S.F.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Used 4.5" Welex Extruder, 30:1 L/D, 250 HP AC Motor, With Hydraulic Screen Changer Single Screw, Water Cooled, Vented Barrel, 5 Barrel Zones, 12 Downstream Zones 42" Centerline Height 250 HP North American Electric AC Motor, Model PE449T-250-6-IN 460/3/60, 280 FLA 1185 RPM Frame: 449T, TEFC Welex Type 45V Change Gear ...more
6" Welex #6.0 30D, extruder, 30:1 L/D, 500 HP Reliance AC Motor, Air-Cooled, Vented Barrel, 6 Barrel Zones, 9 Die Zones, Koellmann gearbox
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 6.0
6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Driven To 8.7:1 Koellmann Gear Box, With 500 HP Reliance AC Motor, (200 Screw RPM), Tempco Cool Touch Heater Bands, Vented & Plugged Barrel, Vent Located Approx. 120" From Center Of Feed Throat, 10" L x ...more
6" Welex, extruder, 30:1 L/D, 500 HP AC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Year: 1997
6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Driven To 8.7:1 Koellmann Gear Box, With 500 HP Reliance AC Motor, (200 Screw RPM), Tempco Cool Touch Heater Bands, Vented & Plugged Barrel, Vent Located Approx. 120" From Center Of Feed Throat, 10" L x ...more
6" Welex, 27" sheet line, 30:1 L/D, air-cooled, 6 barrel zones, 500 HP Baldor AC motor, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Year: 2000
67" Wide Welex Sheetline Consisting Of: 6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, 6 Barrel Zones, 18 Die Zones, Direct Driven To Koellmann UNEX 8.13 Gearbox With 8.74:1 Gearbox Ratio, With 500 HP Baldor AC Motor, 500 HP WEG Drive, S/N 7189, 460/3/60, New In 2000, DOES NOT INCLUDE SCREEN CHANGER Melt Pump ...more
JUST ADDED!
Welex #350, Extruder, 3.5" screw, 30:1 L/D, 100 HP, 1984
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Welex
Model: 350 30:1 LH
Year: 1984
Used Welex 350 30:1 LH (1984) Extruder for Sale. This pre-owned Welex plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Welex Extruder, please feel free to contact us. You may Activate Pricing to view the price of this ...more
JUST ADDED!
Welex #Gala-6, pelletizing line, 30:1 L/D vented barrel & screw, ran 980 Lbs/Hr HIPS
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Welex
Model: GALA 6 PELLETIZING LINE
Used Welex Gala 6 Pelletizing Line Extruder for Sale. This pre-owned Welex plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Welex Extruder, please feel free to contact us. You may Activate Pricing to view the price of this ...more
JUST ADDED!
Welex, 6" single screw extruder
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Welex
JUST ADDED!
Welex, 4.5" single screw extruder, 2017
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Welex
Year: 2017
