251 - 300 of 460 listings
3.94" Reifenhauser #RT1101-1-100-30D, Meltblown Non-Woven Extrusion Line, 30:1 L/D, 63" die head, 80 meters/min., 2020/2021
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Reifenhauser
Model: RT1101-1-100-30D
used reifenhauser 1600 mm meltblown non-woven extrusion line complete reicofil filter media production system with a speed up to 80 meters/minute consisting of: (1) reifenhauser rt1101-1-100-30d single screw extruder. 30:1 l/d. screw dia 100 mm. movable design with rails incl. feeding system and screen changer, (1) ...more
JUST ADDED!
4" Berlyn, extruder, 30:1 L/D, air cooled, 150 HP DC, 450 lb/hr
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Berlyn
4 Berlyn 30:1 Air Cooled Extruder, 4 30:1 Berlyn Extruder, Air cooled, 150 H.P. D.C., Was running poly pipe 450 # per Hour.
4" Leistritz #ZSE-100-GLAAX, co-rotating twin screw extruder, 1600 RPM, 442 HP, electric heat, water cooled, 7,515.6 hours, 2002
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-100-GLAAX
Year: 2002
used leistritz zse 100 glaax 100mm co-rotating twin screw extruder, 44/1 l/d. driven by 330 kw (442 hp), 1600 rpm dc motor with scr control. has 300 rpm screw speed, rated at 5000 newton meters per shaft torque capability and electrically heated water cooled vented barrel. has twin screw side feeder. has 7515.6 hours ...more
4" Buss, kneader, 9:1 L/D, jacketed barrel, 75 HP, w/ underwater pelletizer, spin dryer, 2022
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Year: 2022
used 100mm buss kneader system with hot feed extruder & gala underwater pelletizer | 200 hp | 2,000 lb/hr pvc line, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. includes operator control panel. kneader will discharge into approximately 5.5" o.d. (140mm) hot feed extruder with ...more
4.33" Useon(Nanjing) #SAT110, co-rotating twin screw extruder, 32:1 L/D, air-cooled barrel, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nanjing
Model: SAT110
Year: 2019
108MM Useon(Nanjing) Co-Rotating Twin Screw Extruder, Model SAT110 32:1 L/D, Air-Cooled Barrel, 200 RPM Screw Speed 400 HP AC Motor - 900 RPM Schneider Electric AC Inverter Drive 460/3/60 Top Vented Touch Screen Controls, New In 2019 Includes Spare Screws Rated For Up To 2,600 LBS/HR Of PET FLAKE S/N: 190605 UNIT NO ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
JUST ADDED!
4.4" ICMA San Giorgio #MCM-112-40D, Twin Screw Sheet Extrusion Line, 40:1 L/D, 600-700 kg/hr., raw material mixer, 3-roll calender, 410 Volt, 2011
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Icma San Giorgio
Model: MCM 112-40D
Year: 2011
Machine location: Mexico (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6887), CAPACITY 600-700 kg/h SCREW DIAMETER 112mm L/D 40 SINGLE OR TWIN ...more
JUST ADDED!
4.5" AET #45AS32, strand pelletizing extrusion line, 32:1 L/D, side vented, water cooled, 250 HP Marathon, Xaloy EH-60 screen changer, 480 V., 2004
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Aet
Model: 45AS32
Year: 2004
AET 4.5 32:1 Pelletizing Line, AET Model 45AS32 4.5 32:1 L/D Extruder having a six (6) zone electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42 centerline height. The gearbox is direct driven out the back end by a 250 HP Marathon Blue Max motor with inverter. The gearbox has a shaft ...more
4.5" American Kuhne #450, extruder, 30:1 LD, air cooled, 250 HP, 300°F, Hope Industrial HIS-UM17-CTBH Multi-Touch Control panel HMI, 2005
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American Kuhne
Model: 450
Year: 2005
Used 4.5" American Kuhne 450 Extruder, 30:1 LD, Air Cooled, 250 HP 6 Barrel Zones, Air Cooled 8 Downstream Zones 42.5" Centerline Height Bunting “No-Spill” Rare Earth Drawer Magnet Mounted On Feed Throat To Protect Screw, Barrel, Check Ring, And Downstream Equipment From Metal Contaminants 250 HP Reliance ...more
4-1/2" Black Clawson Davis Standard #4.5-EXTR-B, 3-extruder coextrusion line, 84" trimmed web width, 10-250 FPM, very low hours, 2009
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Black Clawson Davis Standard
Model: 4.5 EXTR B
Year: 2009
Used Black Clawson Davis Standard 4.5 EXTR B (2009) Extruder for Sale. This three-extruder line pairs two 2.5″ units, each 30:1 L/D at approximately 90-100 lbs/hr, with a 4.5″ 30:1 L/D extruder rated at approximately 1,000 lbs/hr. Configured for fluoro polymers in pellet form, it can also run TPU with the ...more
4.5" Davis Standard #450S D8770, Extruder, non-vented type, 200 HP
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Davis Standard
Model: 450S D8770
Davis Standard extruder, Model 450S D8770. 4-1/2" diameter, non-vented type, driven by 200 HP main motor. Includes control panel. Previously used in plastic production applications., Diameter: 4-1/2", Basis: FOB.
JUST ADDED!
4.5" Davis Standard, ram stuffing cascade pelletizing line, 300 HP, #45IN35 secondary extruder 100 HP, Xaloy WRP-12i water ring pelletizer, 2006
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 45IN35
Year: 2006
Davis Standard Used 4.5 Ram Stuffing Cascade Pelletizing Line, Xaloy Water Ring Pelletizer New 2006, Davis Standard Used 4.5 Ram Stuffing Cascade Pelletizing Line, Xaloy Water Ring Pelletizer New 2006, Water Cooled Barrel, 11.68 Gearbox Ratio, 400hp Gearbox Capacity with 1.25 Service Factor, 300hp Baldor Inverter Duty ...more
4-1/2" Davis Standard #45IN45, extruder, 24:1 L/D, air cooled, (5) cooling zones, 225 HP gearbox, 1985
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 45IN45
Year: 1985
Used Davis Standard 45IN45 (1985) Extruder for Sale. This single screw plastic extruder has a 4.5″ screw with a 24:1 L/D ratio and is air cooled with five cooling zones. The gearbox is rated at a 17.36:1 ratio with 225 HP capacity, and power requirement is 460v – 3ph – 60hz. The machine is a new ...more
4.5" Davis Standard #45IN45, extruder, 32:1 L/D, 300 HP Marathon AC motor, vented air cooled barrel, 6 barrel/10 die zones, 17.49:1 gearbox, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45IN45
Used 4.5" Davis Standard Single Screw Thermatic Extruder, Model 45IN45, Air Cooled, 300 HP, New in 2000 32:1 L/D Vented Air Cooled Barrel, 6 Barrel Zones, 10 Die Zones 300 HP Marathon AC Inverter Duty Motor, New in 2016 1788 RPM 17.49:1 Gearbox Ratio, 365 HP Rating with 1.5 Service Factor Mitsubishi AC Drive New in ...more
4.5" Davis Standard #45IN45-34, single screw ram stuffing extruder, 400 HP, 34:1 L/D vented water cooled barrel, 42.5" centerline, 2011
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45IN45-34
Year: 2011
Used 4.5" Davis Standard Single Screw Ram Stuffing Extruder, Model 45IN45-34, New in 2011 34:1 L/D Vented Water Cooled Barrel, 32" x 24" x 12" Water Reservoir, 1hp Water Pump, Heat Exchanger Pneumatic Ram Stuffer, Stuffer 28.5"" x 13.5" 400HP Direct Drive AC Motor, 1775 RPM, Yaskawa AC Drive Pro-Face Touchscreen ...more
4.5" Davis Standard #45T, underwater pelletizing extrusion line, 34:1 L/D, 300 HP Baldor, 1775 RPM, Gala 6 pelletizer, spin dryer, 2017
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45T
Year: 2017
Used 4.5" Davis Standard/Gala Underwater Pelletizing Extrusion Line 4.5" Davis Standard Single Screw Extruder, Model 45T 2017 Davis Standard Gearbox, 17.49 GB Ratio, 400hp Capacity with 1.5 Service Factor 34:1 Air Cooled Barrel with Vent, Vent Located 103"From Feed Throat, 7 Barrel Zones Baldor Inverter Duty 300hp AC ...more
4.5" Davis Standard #45T, thermatic extruder, 32:1 L/D ratio, 3-Layer 54" W sheet extrusion line, Beringer screen changer, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 45T
Year: 2019
Used 54" Wide Davis Standard 3-Layer Sheet Extrusion Line 4 1/2" Davis Standard Model 45T (450) Thermatic Extruder, 32:1 LD Ratio, Water Cooled, Control Techniques SPMD1403 Inverter Drive, 250HP Motor, S/N 002156214-1-1, 2019 Nordson Screen Changer 3 1/2" Davis Standard Model 35 Thermatic Extruder, 24:1 LD Ratio ...more
JUST ADDED!
4.5" Davis Standard #MV45IN45, extruder, 24:1 L/D, water cooled, non-vented, 1998
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: MV45IN45
Year: 1998
4.5 Davis Standard Extruder MV45IN45 1997, 4.5 Davis Std. Extruder MV45IN45 New 1998, Water Cooled, 24:1, N-Vented.
4.5" Davis Standard #SB450, super blue single screw extruder, 24:1 L/D, air cooled, 5 barrel zones, 200 HP, 6" Nordson screen changer, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB450
Year: 2007
Used 4.5" Davis Standard Super Blue Extruder, Model SB450, New in 2007 5 Zone Air Cooled 24:1 L/D Barrel 200hp, 1760rpm Reliance AC Inverter Duty Motor & Yaskawa CIMR-F7U4110 AC Inverter Drive 17.39 Gearbox Ratio, 400hp Rating With 1.5 Service Factor Control Panel with Eurotherm 3208 Temperature Controllers, 12 ...more
4.5" Davis Standard, 30:1 L/D extruder, electrically heated, air cooled barrel, 150 HP DC, 1991
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis Standard
Year: 1991
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pump, 42" air cooled centerline barrel height and temperature ...more
4.5" Davis Standard, single screw extruder, 30:1 L/D, water-cooled, 250 HP AC, 6 barrel zones, Yaskawa A1000 VFD, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 1999
Used 4.5" Davis Standard Single Screw Extruder, Water Cooled, 30:1 L/D, 250 HP Water Cooled Barrel, 6 Barrel Zones, 12 Downstream Zones 9" x 5.25" Feed Throat 250 HP Baldor AC Motor 1770 RPM @ 60 Hz / 3450 RPM @ 117.5 Hz URL3203Z Frame, DPG-FV Enclosure Davis Standard Gearbox, Rated To 360 HP 17.49:1 Ratio 1.5 SF @ ...more
4.5" Diamond Multimax America, extruder, 32:1 L/D, 200 HP, 52" centerline, hopper & barrel clamp, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Diamond America
Year: 2004
4.5" Diamond America Extruder, 32:1 L/D Ratio, Water Cooled Barrel, Vented Plugged, 5 Barrel Zones, 8 Die Zones, Pressure Readout, Amp Load, Melt Temp and Screw RPM, Screw Cooling, Yaskawa A1000 Drive, 200 Hp RPM AC Motor, Direct Driven To a 17.66:1 Ratio, 52" Centerline Height, 7" x 7" Feed Section Has Hopper and ...more
JUST ADDED!
4.5" EDS, underwater pelletizing extrusion line, 36:1 L/D, vented, 250 HP, Gala Edge 1000 pelletizer, 2,200 lb/hr, spin dryer, Rebuilt 2017
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Eds
4.5 EDS Pelletizing Line w/Gala, 4.5 EDS 36:1 L/D Extruder Rebuilt 2017, Vented barrel and screw, Purpose Screw 2 Stage, 250 HP, Digital Temp Controllers, Gear Box Ratio 16:1, With Gala SLC Model Edge 1000 Gala 6 Underwater Pelletizer new in 2009, rated at 2200 lb per hour, 80 GPM tempered water system, process water ...more
4.5" John Brown / Egan, ram stuffer extruder, 32:1 L/D, 250 HP AC motor, 14:1 gearbox ratio, 1994
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Egan
Year: 1994
Used 4.5" John Brown Ram Stuffer Extruder,32:1 L/D Ratio, Vented Barrel 13.5" x 11" Over sized Grooved Feed Section, Pneumatic Ram Stuffer Air Cooled Barrel 7 Zones, Vent Located 97" From Middle Of Feed Throat 14:1 Gearbox Ratio Temperature Control Panel With Tempco 1/8 din Controls, 5 Die Zones, Solid State Relays AC ...more
JUST ADDED!
4.5" Gloucester #HighBoy, extruder, 30:1 L/D, water cooled, 200 HP DC, Extech slide plate screen changer, Acrison #105SE feeder, spare screw
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Gloucester
Model: HIGHBOY
4.5 Gloucester HighBoy 30:1 Vented Extruder, 4.5 Gloucester High Boy 30:1 Vented Extruder.
JUST ADDED!
4.5" HPM, strand pelletizing extrusion line, 30:1 L/D, vented, 250 HP DC, Cumberland 8.5" strand pelletizer, screen changer, quench tank, 1,000 lb/hr
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Hpm
4.5 HPM Strand Pelletizing Line video available, 4.5 HPM Sinlge Screw Pelletizing Line consisting of the following:, 4.5 HPM Extruder 30:1 L/D 250 HP DC Motor Saftronics Drive DC400 Vented Barrel 5 Heater Zones They were processing PET material 1000 lbs./hour, but can do Nylon, PP. etc., Cumberland 8.5 Strand ...more
JUST ADDED!
4.5" NRM #PACEMAKER-III, Single Screw Extruder, 34:1 L/D, 12' vented barrel, 8" feed throat, 200 HP DC motor, 500 V., SCR controls, 1982, AS IS
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nrm
Model: PACEMAKER-III
Year: 1982
used nrm pacemaker iii 4.5" single-screw extruder with 34:1 l/d ratio. unit s a 12' long vented barrel with electric heating and water cooling, along with an 8" round feed throat. screw is driven by a 200 hp, 500 vdc electric motor. barrel includes a 5.5" side vent located approximately 6.5' from the feed ...more
4.5" NRM, single screw extruder, 34:1 L/D, 300 HP DC motor, 6 barrel zones, 6 downstream zones, air cooled vented barrel, 1976
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Year: 1976
Used 4.5" NRM Single Screw Extruder, 34:1 L/D, 300 HP DC Motor With Blower Air Cooled Vented Barrel, 6 Barrel Zones, 6 Downstream Zones 9" x 13" Tangential Jacketed Water Cooled Feed Throat With Metal Separator Approx. 41" Centerline Height 300 HP DC Motor 500V, 536A STATOHM Model: DC42NM-3-4 DC Drive Rated For ...more
4.5" NRM, Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP GE motor, 1150 RPM, 500 VDC, power feed roll, adjustable scraper blade
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6077 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.68:1 G/B ratio, 100 HP DC, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 24.68:1 G/B ratio, 100 HP DC motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP, 1750/2100 RPM, 500 VDC
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6064 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, Reliance 75 HP, 1750/2100 RPM, 500 VDC motor, missing feed roll assembly.
4.5" NRM, cold feed rubber extruder, 17:1 L/D, 125 HP DC, roller feed, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 17:1 L/D, 125 HP DC 1150/2000RPM 500V motor, Kwik clamp head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12.1 L/D, 30.30:1 G/B ratio, 125 HP DC, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 30.30:1 G/B ratio, 125 HP DC motor, no head, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 125 HP, 1200 RPM, straight delivery head
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, Reliance 125 HP, 1200 RPM, 500 VDC motor, straight delivery head, hinge assembly, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
4.5" NRM rubber extruder, 120mm, cold feed 12:1, 100 HP DC, roller feed, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 4.5" 120mm 4 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 100 HP DC, 1150/2000 RPM, 550 V motor, clamp type head, roller feed / power feed roll, approximately 14 week delivery.
4.5" Polytruder, single screw extruder, 34:1 L/D, Beringer water ring pelletizing system w/ spin dryer, hydraulic drive & Control panel, 42" center height
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polytruder
Used 4.5" Polytruder Extruder, L/D: 34:1, With Beringer Water Ring Pelletizing System with Spin Dryer, Hydraulic Drive, and Control Panel Single Screw, Air Cooled, Vented, 7 Barrel Zones, 4 Downstream Zones 17.74:1 Flender Gearbox 12" x 5.5" Square Water Cooled Feed Throat 42" Centerline Height Screw Speed: 98.63 RPM ...more
4.5" Prodex, Side Vented Extruder, 32:1 L/D, electric heat, closed loop water cooled barrel, w/ Lufkin " change Gear" Gearbox 15.03:1, Yaskawa A10000, 300 HP, AS-IS
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Prodex
Used 4.5" Prodex 32/1 L/D extruder with electrically heated water cooled (closed loop) barrel (side vented). Direct driven in tuck-under manner by 300 hp AC motor. Motor drive consisting of Yaskawa Model A1000 drive and 600 hp disconnect/400hp disconnect. Has Lufkin "Change Gear" gearbox with 15.03/1 reduction. Has a ...more
JUST ADDED!
4.5" PTI #Apex, strand pelletizing extrusion line, 32:1 L/D, vented, air cooled, 200 HP DC, 30 hole strand die, water bath, Cumberland #6 pelletizer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Pti
Model: APEX
4.5 PTI Vented -32:1 Extrusion Pelletizing Line New 2022, 4.5 PTI 32:1 Vented Air Cooled Extrusion Pelletizing Line New 2022, Model Apex Series, Vented Barrel and Two Stage Screw, Air Cooled, Screw Speed 125 RPM, Emerson 200 HP DC Motor Rebuilt 2012, ABB Drive 300 HP Drive purchased and installed in 2012, PTI Control ...more
4.5" PTI, extruder, 32:1 L/D, vented, water-cooled barrel, 125 RPM, 200 HP DC, 6 barrel zones, 1992
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Pti
Year: 1992
Used 4.5" PTI Extruder, 32:1 L/D Ratio, Vented, Water-Cooled Barrel 14.062:1 Gearbox Ratio, Lufkin DH225CBN-611, Rated To 368 HP, Gearbox Serial Number 9833 125 RPM Screw Speed, Vented Barrel, Water-Cooled Barrel 6 Barrel Zones, 3 Die Zones 200 HP Emerson DC Motor and ABB DCS 800 Drive 42" Centerline PTI Control Panel ...more
4.5" RMS 120mm pin barrel rubber extruder, 14:1 L/D, 150 HP, 1150 RPM, 500 VDC, 2006
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Rms
Year: 2006
One (1) RMS 4.5" 120mm Pin_Barrel_Rubber_Extruder, 14:1 L/D, 150 HP 1150 RPM 500 VDC motor, variable straight delivery head, forced lube system, power feed roll, feed roller external bearings and adjustable scraper blade, date 5/2006, S/N 05-199, NOTE Triplex head 250x200x120mm quoted separately.
4-1/2" Sterling #VSY60-62, Plastics Extruder, 150 HP, 24:1 L/D, Herringbone Gear Drive, Melt Pump, Mixing Screws
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Sterling
Model: VSY60-62
Year: 1900
Make: Sterling, Model: VSY60-62, Year: 1900, Machine Location: Ohio, 4.5″ Sterling plastics extruder a herringbone gear drive and 150 HP motor, designed for consistent melt quality and high-output processing. Featuring a 24:1 L/D ratio with both pumping and mixing screws, this unit is well suited for plastic ...more
JUST ADDED!
4.5" Sterling, extruder, 30:1 L/D, air cooled, vented, 6 zones, 200 HP DC, Control Techniques Mentor II drive, CAL 9900 controls, hopper
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
4.5 Sterling 30:1 Extruder Air Cooled -Vented, 4.5 Sterling 30:1 Extruder Air Cooled -Vented, 30:1 L/D Air Cooled -6 zones vented barrel 10- zone barrel with Cal 9900 instruments 200 HP DC motor with Control Techniques Mentor II Drive with hopper.
JUST ADDED!
4.5" Sterling, single screw extruder, 30:1 L/D, vented, 200 HP, VFD drive, 13.95:1 gear ratio, 125 max RPM, Berringer screen changer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
4.5 Sterling 30:1 Vented Extruder, 4.5 Sterling Single Screw Extruder, 200 HP (motor was purchased rebuilt 1 year ago), New VFD Drive (purchased new 1 year ago), 30:1 L/D, Vented Barrel and Screw, 13.95:1 Gear Ratio, 125 Max RPM, Berringer 4.5 Slide Screen Changer, Currently running in plant under power.
JUST ADDED!
4.5" Sterling, extruder, 24:1 L/D, 150 HP, new Maddox mixing screw, spare pumping screw, melt pump, spare 150 HP motor
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
4.5 Sterling Extruder 24:1 w/Maddox Type Mixing Screw, 4.5 Sterling Extruder 150hp, 24:1, 2 screws, 1 pump type and 1 mixing type (new) and a spare 150hp motor., 24:1 L/D This machine has a brand-new screw, spare 150hp motor and melt pump. The used screw in the machine is a plain pumping type screw and the new screw ...more
4.5" Sterling, Single Screw Extruder, 30:1 L/D, air cooled vented barrel, 6 zones, 200 HP DC motor, Control Techniques Mentor II drive
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Sterling
Used Sterling 4.5″ Single Screw Extruder for Sale. This extruder has a 4.5″ screw with a 30:1 L/D ratio, an air cooled, vented barrel with six barrel zones, and is driven by a 200 HP DC motor through a Control Techniques Mentor II drive. Temperature control is handled by a ten zone control panel using Cal ...more
4.5" Sterling, single screw extruder, 150 HP DC motor, 30:1 L/D air cooled barrel, 42" centerline, Eurotherm temperatur controller
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Sterling
Used 4.5" Sterling Single Screw Extruder 30:1 Air Cooled Barrel Reliance 150hp DC Motor, 1750/2000 RPM, 500 Volt, 245 Amp 9.5" x 6" Feed Throat Eurotherm Temperature Controllers, 5 Barrel Zone, 2 Die Zone Saftronics DC Drive 42" Centerline Serial Number: 45510 Dimensions: 192" x 88".
4.5" Welex #4.5-30:1D, extruder, 30 L/D ratio, 11.7:1 gearbox ratio, 350 HP motor, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 4.5-30:1D
Year: 1999
Used 4.5" Welex, Model 4.5 30:1 D, 30 L/D Ratio, 11.7:1 Gearbox Ratio, 350HP 350HP Baldor AC Motor 6 Barrel Zones, 8 Die Zones Rectangular Throat Feed (6.5" x 5.5") 2208 Temperature Controllers Dynisco Pressure Readout ABB ACS880 AC Drive Approx. 30 HP Melt Pump Driven By SEW Gearbox Mixed Solid State & Mercury ...more
JUST ADDED!
4.5" Welex, pelletizing extrusion line, 30:1 L/D, vented, 200 HP DC, Gala 6 underwater pelletizer, TWS water system, spin dryer, box dumper
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Welex
4.5 Welex 30:1 Pelletizing Line w/Gala 6, 4.5 Welex 30:1 Pelletizing Line w/Gala 6, 4.5 Welex Single Screw Extruder complete with Gala #6 Under Water Pelletizing System, 30:1 L/D vented barrel and screw, 200 HP DC motor, 126 max RPM screw speed, Was running HIPs material, 6 barrel zones/5 die zones, 4.5 screen changer ...more
4.5" Welex, extruder, 30:1 L/D, 250 HP AC motor, hydraulic screen changer, 42" centerline, Fr.449T, TEFC, 1.25 S.F.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Used 4.5" Welex Extruder, 30:1 L/D, 250 HP AC Motor, With Hydraulic Screen Changer Single Screw, Water Cooled, Vented Barrel, 5 Barrel Zones, 12 Downstream Zones 42" Centerline Height 250 HP North American Electric AC Motor, Model PE449T-250-6-IN 460/3/60, 280 FLA 1185 RPM Frame: 449T, TEFC Welex Type 45V Change Gear ...more
JUST ADDED!
4.7" American Kuhne #AK-120MM, extruder, 120mm, 30:1 L/D, 200 HP, air cooled barrel, 42" centerline, digital controls, 480 V., 2013, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Kuhne
Model: AK-120MM
Year: 2013
AMERICAN KUHNE AK120mm 30:1 Rebuild, American Kuhne, Model: AK 120MM 30:1 Rebuild, NEW 2013, -Screw Size: 120 mm -L/D Ratio: 30:1 -Motor: 200 HP -Digital Controls -42 Centerline Height -Electrically Heated -Air Cooled Barrel -Electrical Requirements: 480 V.
JUST ADDED!
4.7" American Kuhne #AK-120MM, single screw extruder, 120mm, 30:1 L/D, 200 HP, air cooled barrel, 42" centerline, digital controls, 480 V., 2013
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Kuhne
Model: AK-120MM
Year: 2013
American Kuhne AK120mm 30:1 Single Screw Extruder 2013, American Kuhne AK120mm 30:1 Single Screw Extruder 2013, Screw Size: 120 mm, 30:1 L/D Ratio, 200 HP motor, Digital Controls, 42 Centerline Height, Electrically heated Air Cooled Barrel, 480v.



















































