1 / 10
Click to zoom in
1 / 10
For Sale by Arlington Machinery
Surplus Record Dealer Since 1998
Location: Lake Zurich, IL
Contact Chris / Garrett
Phone Number: 847...> Show Phone Number 847-957-9731
Let the seller know you found their listing on Surplus Record!
Description
Description
- Used 4.5" American Kuhne 450 Extruder, 30:1 LD, Air Cooled, 250 HP
- 6 Barrel Zones, Air Cooled
- 8 Downstream Zones
- 42.5" Centerline Height
- Bunting “No-Spill” Rare Earth Drawer Magnet Mounted On Feed Throat To Protect Screw, Barrel, Check Ring, And Downstream Equipment From Metal Contaminants
- 250 HP Reliance Electric AC Motor With 1.5 HP Blower
- 460/3/60, 295A
- 1765 RPM
- Koellmann Gearbox Rated For 300 HP, S/N: 2260006
- Size: UNEX 7.1
- Ratio: 17.72 : 1
- Service Factor: 1.6
- Input RPM: 1750
- Output RPM: 99
- Yaskawa Varispeed F7 AC VFD, Model: CIMR-F7U4160, S/N: 1W0587626960003
- Input: 480/3/60, 334A
- Output: 0-480V, 0-400Hz, 304A, 230kVA
- Dynisco EH-45 Hydraulic Screen Changer, S/N: EH45702 (Missing Hydraulic Cylinder)
- 600 AMP Fuji Auto Main Breaker, Model BW630RAGU-3P600
- Pressure Rating Up To 10,000 psi
- Temperature Rating Up To 850°F
- Thermal Transfer Products 4-Pass Shell & Tube Heat Exchanger, Model: C-1014-2-6-F, S/N: 1398283
- Shell: 300 PSI, Tubes: 150 PSI
- Max Temp. 300F
- HOPE Industrial HIS-UM17-CTBH Multi-Touch Control Panel HMI, S/N: 6107825
- S/N: 5057
- New In 2005
- Approximate Dimensions:
Get Your Price from Arlington Machinery!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
4.5" PTI, extruder, 32:1 L/D, vented, water-cooled barrel, 125 RPM, 200 HP DC, 6 barrel zones, 1992
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Pti
Year: 1992
Used 4.5" PTI Extruder, 32:1 L/D Ratio, Vented, Water-Cooled Barrel 125 RPM Screw Speed, Vented Barrel, Water-Cooled Barrel 200 HP Emerson DC Motor and Emerson Quantum II DC Drive PTI Control Panel with 6 Barrel Zones, 3 Screen Changer Zones, and 3 Die Zones New In 1992, S/N 1551 Approximate Dimensions.
JUST ADDED!
4-1/2" Sterling #VSY60-62, Plastics Extruder, 150 HP, 24:1 L/D, Herringbone Gear Drive, Melt Pump, Mixing Screws
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Sterling
Model: VSY60-62
Year: 1900
Make: Sterling, Model: VSY60-62, Year: 1900, Machine Location: Ohio, 4.5″ Sterling plastics extruder a herringbone gear drive and 150 HP motor, designed for consistent melt quality and high-output processing. Featuring a 24:1 L/D ratio with both pumping and mixing screws, this unit is well suited for plastic ...more
4.5" NRM, cold feed rubber extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP, 1750/2100 RPM, 500 VDC
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6064 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, Reliance 75 HP, 1750/2100 RPM, 500 VDC motor, missing feed roll assembly.
4.5" Prodex, Side Vented Extruder, 32:1 L/D, electric heat, closed loop water cooled barrel, w/ Lufkin " change Gear" Gearbox 15.03:1, Yaskawa A10000, 300 HP, AS-IS
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Prodex
Used 4.5" Prodex 32/1 L/D extruder with electrically heated water cooled (closed loop) barrel (side vented). Direct driven in tuck-under manner by 300 hp AC motor. Motor drive consisting of Yaskawa Model A1000 drive and 600 hp disconnect/400hp disconnect. Has Lufkin "Change Gear" gearbox with 15.03/1 reduction. Has a ...more
4.5" Davis Standard #450S D8770, Extruder, non-vented type, 200 HP
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Davis Standard
Model: 450S D8770
Davis Standard extruder, Model 450S D8770. 4-1/2" diameter, non-vented type, driven by 200 HP main motor. Includes control panel. Previously used in plastic production applications., Diameter: 4-1/2", Basis: FOB.
