go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

4-1/2" Black Clawson Davis Standard #4.5-EXTR-B, 3-extruder coextrusion line, 84" trimmed web width, 10-250 FPM, very low hours, 2009

Model: 4.5 EXTR B
Year: 2009
Dia.of Screw: 4.50
Stock # 8075937

For Sale by KD Machinery

Surplus Record Dealer Since 2026
Gold Level Dealer
Location: Scottsdale, AZ
Contact Sales Dept.
Let the seller know you found their listing on Surplus Record!

Description

Used Black Clawson Davis Standard 4.5 EXTR B (2009) Extruder for Sale. This three-extruder line pairs two 2.5″ units, each 30:1 L/D at approximately 90-100 lbs/hr, with a 4.5″ 30:1 L/D extruder rated at approximately 1,000 lbs/hr. Configured for fluoro polymers in pellet form, it can also run TPU with the 96″ multi-manifold die. Maximum web width is 84″ trimmed / 92″ untrimmed, with a nominal 96″ roll face and 102″ at the winder for oscillation. Line speed runs 10-250 FPM, gear-in at 250 FPM, thread up to 50 FPM. Tension ranges are 5-50 lbs low and 50-150 lbs high. Winder takes 26″ rolls to 3,500 lbs on 6″ ID shafted fibre cores. Three pairs of edge trim razor slitters. Very low hours. The Sri-Air HP4-X 750 FM system is not included. New replacement cost $1.0 mil. Available for inspection under power. See more used plastic extruders, then


Extruder #12.5", 30:1 L/D Ratio
Extruder #22.5", 30:1 L/D Ratio
Extruder #1 & #2 Throughput90-100 Lbs/Hr (Approx)
Extruder #34.5", 30:1 L/D Ratio
Extruder #3 Throughput1,000 lbs. / Hr. (approx)
Material ProcessedFluoro Polymers (Pellet Form)
Maximum Web Width *184" Trimmed Finished / 92" Untrimmed
Maximum Web Width *256" Trimmed
Nominal Machine Roll Face96" / 102" at Winder (For Oscillation)
Machine Line Speed *1 *210-250 FPM
Gear-In Speed250 FPM
Adjustable Thread SpeedUp to 50 FPM
Process Tension Ranges *1Low Range 5 50 Lbs. / High Range 50 150 Lbs.
Hand of Machine Except Winder/Drive Side *4Right Side
Hand of Winder OnlyLeft
SlittersEdge Trim Razor Blade (3 Pairs)
Max Roll Diameter (Winder)26"
Max Roll Weight (Winder)3,500 Lbs.
Core Size Shafted *56" ID, 6 12" OD
Core MaterialFibre
Web Tension Range *1Low Range 5 50 Lbs. / High Range 50 150 Lbs.
Idler Rolls6" O.D. Live Shaft Carbon Fiber
NoteVery Low Hours, System can also run TPU (Thermoplastic Polyurethane) 96" Multi-Manifold Die.......New Replacement Cost - $1.0 mil., Sri-Air Model HP4-X 750 FM system - NOT INCLUDED

Get Your Price from KD Machinery!

Buyers Who Viewed This Listing Also Viewed:

4.5" NRM #PACEMAKER-III, Single Screw Extruder, 34:1 L/D, 12' vented barrel, 8" feed throat, 200 HP DC motor, 500 V., SCR controls, 1982, AS IS

Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nrm
Model: PACEMAKER-III
Year: 1982
used nrm pacemaker iii 4.5" single-screw extruder with 34:1 l/d ratio. unit s a 12' long vented barrel with electric heating and water cooling, along with an 8" round feed throat. screw is driven by a 200 hp, 500 vdc electric motor. barrel includes a 5.5" side vent located approximately 6.5' from the feed ...more

4.5" Davis Standard #MV45IN45, extruder, 24:1 L/D, water cooled, non-vented, 1998

Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: MV45IN45
Year: 1998
4.5 Davis Standard Extruder MV45IN45 1997, 4.5 Davis Std. Extruder MV45IN45 New 1998, Water Cooled, 24:1, N-Vented.

4.5" NRM, Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP GE motor, 1150 RPM, 500 VDC, power feed roll, adjustable scraper blade

Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6077 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.

4.5" Sterling, Single Screw Extruder, 30:1 L/D, air cooled vented barrel, 6 zones, 200 HP DC motor, Control Techniques Mentor II drive

Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Sterling
Used Sterling 4.5″ Single Screw Extruder for Sale. This extruder has a 4.5″ screw with a 30:1 L/D ratio, an air cooled, vented barrel with six barrel zones, and is driven by a 200 HP DC motor through a Control Techniques Mentor II drive. Temperature control is handled by a ten zone control panel using Cal ...more

4.5" Davis Standard #SB450, super blue single screw extruder, 24:1 L/D, air cooled, 5 barrel zones, 200 HP, 6" Nordson screen changer, 2007

Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB450
Year: 2007
Used 4.5" Davis Standard Super Blue Extruder, Model SB450, New in 2007 5 Zone Air Cooled 24:1 L/D Barrel 200hp, 1760rpm Reliance AC Inverter Duty Motor & Yaskawa CIMR-F7U4110 AC Inverter Drive 17.39 Gearbox Ratio, 400hp Rating With 1.5 Service Factor Control Panel with Eurotherm 3208 Temperature Controllers, 12 ...more

Share