201 - 250 of 460 listings
JUST ADDED!
3.5" Davis Standard #35MV350, Extruder, 24:1 L/D, non-vented, air cooled, 4 zones, 75 HP DC motor, 17.4:1 gearbox, 460 Volts, 3PH, 2000
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 35MV350
Year: 2000
Used Davis Standard 35MV350 (2000) Extruder for Sale. This unit runs a 3.5″ screw at a 24:1 L/D ratio, non-vented, with four air-cooled zones and a touch pad temperature controller. Power comes from a 75 HP DC motor driven by a Reliance DC drive, through a gearbox rated at 158 HP with a 17.4:1 ratio. Electrical ...more
JUST ADDED!
3.5" Davis Standard #35MV350, Extruder, 24:1 L/D, 75 HP DC, air cooled, 4 zones, non-vented, 17.4:1 gear ratio, touch pad temp. control, Maguire blender, 460 V., 2000
Trader Machinery Inc | Concord, ON
Category: Extruders and Extrusion Lines
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Davis Standard
Model: 35MV350
Year: 2000
3.5"24:1475 HP17.4:1158460 V / 3 PHASE.
3.5" & 1.5" Davis Standard #35TN35-19DSRE, cold feed rubber co-extrusion system, 20:1 L/D, 100 HP main & 20 HP co-ex, water cooled, 2012
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 35TN35-19DSRE
Year: 2012
Used 3.5" & 1.5" Davis-Standard DSRE Cold Feed Rubber Co-Extrusion System, 100 HP Main Extruder, 2012 System Includes: Used 3.5" Davis-Standard Model 35TN35-19DSRE Cold Feed Rubber Extruder, 20:1 L/D, 100 HP 4 Barrel Zones, 1 Downstream Zone, Water-Cooled Screw & Barrel Side Vented Barrel 42" Centerline Height ...more
3.5" Davis Standard #35V, extruder, water cooled, 100 HP, 7 barrel/4 downstream zones, PowerFlex 755, 42,651 hours, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 35V
Year: 2007
Used 3.5" Davis Standard / NRM Model 35V Extruder, 30:1 L/D, Water Cooled, 100 HP 17.39:1 Davis Standard Gearbox Rated For 257 HP Watercooled Barrel, 7 Barrel Zones, 4 Downstream Zones 45.5" Centerline 100 HP AC Variable Speed Inverter Duty Motor, 230/460/3/60, 230/115 FLA 100 HP @ 60 Hz – 1,785 RPM 100 HP @ 90 ...more
JUST ADDED!
3.5" Davis Standard #DS35, extruder, drive replaced 2016, extra barrel & general purpose screw
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: DS35
3.5 Davis Standard Extruder Mdl. DS35, 3.5 Davis Standard Mdl. DS35 Extruder.
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
3-1/2" Davis Standard #MV-35IN35, extruder, 24:1 L/D, air cooled, 100 HP, no screw included, 2000
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: MV-35IN35
Year: 2000
Used Davis Standard MV-35IN35 (2000) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Davis Standard Extruder, please feel free to contact us., Screw Size3.5" L/D Ratio24:1 ...more
JUST ADDED!
3.5" Davis Standard #MV-35INDS35, Mark V extruder, 24:1 L/D, 75 HP DC, air cooled, non-vented, 4 barrel zones, 42" centerline, 575 V., 1998
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: MV-35INDS35
Year: 1998
Used 3.5" Davis-Standard Mark V Single Screw Extruder, 24:1 L/D, 75 HP DC Air-Cooled, Non-Vented, 4 Barrel Zones, 4 Downstream Zones 4.5" x 7" Feed Throat 42" Centerline 75 HP DC Motor Reliance Electric FlexPak 3000 DC Variable Speed Drive, Model 75FN4042 17.03:1 Davis Standard Gearbox Rated For 125 HP Max RKC CB400 ...more
JUST ADDED!
3.5" Davis Standard #MV35IN35, extruder, 24:1 L/D, air cooled, non-vented, 158 HP, 17.39:1 gear ratio, 1998 (3 available)
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: MV35IN35
Year: 1998
3.5 Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998, 3.5 Davis Standard Extruders Model #MV35IN35 New 1998 (Three Available), Air Cooled, 24:1 L/D, Non-Vented, HP 158, Gear Ratio: 17.39, SF 1.25.
3.5" Davis Standard #MV35IN35, extruder w/dual 1.25" co-extruders, 241:1 L/D, 2012
Blades Machinery Co Inc | Elk Grove Village, IL
Category: Extruders and Extrusion Lines
Seller: Blades Machinery Co Inc
Location: Elk Grove Village, IL
Mfr: Davis Standard
Model: MV35IN35
Year: 2012
Stock#: 17744., Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012, Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/3/60 input power. 278 maximum amp load, A Davis standard model MV35IN35 3.5 24:1 L/D ...more
JUST ADDED!
3.5" Davis Standard, extruder, 30:1 L/D, vented, 150 HP DC drive, daylight filter, control panel
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
3.5 Davis Standard Extruder 30:1 Vented, One (1) Used 3.5 Davis Standard Extruder, 30:1 L/D, Vented, 150 HP DC Drive, DL Filter, Control Panel.
JUST ADDED!
3.5" Davis Standard, single screw extruder, 24:1 L/D, 75 HP AC, non-vented, air cooled, PVC screw, 5 barrel & 3 die zones, 1997
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Year: 1997
3.5 Davis Std. 75 HP Air Cooled Extruder, 1997 Davis Standard 3.5 Inch Single Screw Extruder:, 75 HP AC Motor with 75 HP AC Drive, 24:1 L/D, Non vented barrel, PVC screw, Air cooled, 5 barrel zones, 3 die zones.
JUST ADDED!
3.5" Davis Standard, extruder, 20:1 L/D
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
3.5 Davis Standard 20:1 LD Extruder, 3.5 Davis Standard 20:1 LD Extruder.
JUST ADDED!
3.5" Davis Standard, extruder, 30:1 L/D, 150 HP AC, air cooled, 17:1 gear ratio, 100 RPM, 5 barrel & 4 die zones
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
3.5 Davis Std. 30:1 Air Cooled Extruder, 3 1/2 Davis Standard 30:1, 150 H.P. A.C., Air Cooled, 350 to 400 # per HR., Material Poly, No Clamp Bolt on Front End, 17:1 Gear Ratio 100 RPM, 5 Barrel Zones, 4 Die Zones.
3.5" Merritt / Davis Standard, single screw extruder, air cooled, 24:1 L/D, 75 HP, Eurotherm temperature controller
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 3.5" Merritt/Davis Standard Single Screw Extruder, 24:1 L/D Air Cooled Barrel, 5 Barrel Zones 75hp DC Motor & Drive 20.3:1 Gearbox Ratio Eurotherm Temperature Controllers, Amp Meter per Zone Right to Left Orientation Serial Number: PR-02749-01 Clamp & 7 Screws Included.
3.5" Davis Standard/NRM extruder, 24:1 L/D, 4 barrel zones, screen changer, 75 HP, 460 V., 1780 RPM, AB 1336 drive
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Used 3.5" Davis Standard/NRM Extruder, 24:1 L/D, S/N BJ861 4 Barrel Zones, 4 Downstream Zones, Screen Changer Zone Centerline Height: 40" 75 HP Marathon AC Motor Motor - 460/3/60, 92A 1780 RPM 24:1 NRM/Davis Standard Gearbox Allen Bradley 1336 Impact Drive Input: 480/3/60, 119A Output: 0-460/3/0-400, 120.3A Eurotherm ...more
JUST ADDED!
3.5" Gamma Meccanica #GM90, pelletizing extrusion line, 90mm, 36:1 L/D, 90 KW, 145 max RPM, hopper & auger
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Gamma Meccanica
Model: GM90
Gamma Meccanica GM90 Pelletizing Line # 90 36D, Gamma Meccanica GM90 Pelletizing Line w/hopper & auger, 90mm screw diameter, 36:1 L/D, Max screw revolutions 145RPM, Thermoregulatgion zones 7 double function, Extruder electric motor 90 kw 1450 RPM.
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester model 35250r2 3.5" diameter single screw extruder. 3.5" diameter screw, 32:1 l/d. has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is ...more
3.5" HPM #3.5TMC-24, non-vented extruder, electrically heated, air cooled, Witlock dryer, 1994
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Hpm
Model: 3.5TMC-24
Year: 1994
Used 3.5" 24/1 L/D HPM non-vented extruder. Model 3.5TMC-24, serial #93182. New 1994. Has electrically heated, air-cooled, barrel. Belt driven by a 75 hp brushless DC motor with controls. Flender gearbox type SZNE-250 with a reduction ratio of approximately 13.88/1 rated for up 157 hp. Includes unitized temperature ...more
3.5" HPM #3.5TMC-24, Single Screw Extruder, Air Cooled, 24:1 L/D, 75 HP, 460 V, 1994
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hpm
Model: 3.5TMC-24
Year: 1994
Used 3.5" HPM Single Screw Extruder, Model 3.5TMC-24, 24:1 L/D, Air Cooled, 75hp, New in 1994 75hp Marathon Blue Max AC Motor 1780 RPM 221 (FT/LBS) Torque 460/3/60, 92 FLA Brand New WEG CFW500 AC VFD Flender Gearbox Type SZNE 250, S/N: D22-306-511-4-5 Ratio: 13.881:1 Driver:1838 RPM, Driven: 60 RPM With Screw & ...more
3.5" JSW #TEX-90C-30AW-2V, twin screw extruder pelletizing line, 30:1 L/D, 150 KW, screen changer, gear pump, pelletizer, vacuum unit
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Jsw
Model: TEX 90C-30AW-2V
ITEM NO : 107723 QTY : 1 MANUFACTURER : JSW MODEL : TEX 90C-30AW-2V SCREW DIAMETER : 90MM L/D : 30 TO 1 HP : 150 KW RPM : 24 TO 240 GEAR RATIO : 4.79701 HEAT TYPE : ELECTRIC HEATER VENTED : 2 VENT ZONES SCREEN CHANGER Y/N : Y COMPLETE PELLETIZING LINE; INCLUDES 90 MM TWIN SCREW EXTRUDER: JSW MODEL TEX 90C-30AW-2V; 90 ...more
3.5" Merritt Davis #3.5, extruder, 24:1 L/D ratio, air-cooled barrel, 5 barrel zones, 13.9:1 gearbox ratio, 42" centerline
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Model: 3.5
Used 3.5" Merritt Davis Model 3.5 Extruder with 1.5" Merritt Pedestal Extruder System Consists Of The Following Pieces: 3.5" Merritt Davis Extruder, 24:1 L/D Ratio, Air-Cooled Barrel, 5 Barrel Zones 13.9:1 Gearbox Ratio, Direct Driven, 75 HP Eurotherm DC Motor(2000/1150 RPM) With Reliance FlexPak DC Drive, 130 RPM ...more
3.5" MGB/NRM, Single Screw Extruder, 32:1 L/D, vented, air cooled, 6 barrel zones, 125 HP DC motor, Mentor II drive, 15:1 gearbox
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Mgb / Nrm
Model: 3.5\ SINGLE SCREW EXTRUDER
Used MGB / NRM 3.5″ Single Screw Extruder for Sale. This vented, air cooled extruder runs a 3.5″ screw with a 32:1 L/D ratio and six barrel zones. Power comes from a 125 HP DC motor through a Control Techniques Mentor II DC drive, with a 15:1 gearbox ratio. It is a 9 zone control panel unitized on the base ...more
3.5" Monsanto, 3.5" 90mm cold feed extruder, 16:1 L/D, 100 HP 500 VDC motor
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto
One (1) Used Monsanto 3.5" 90mm Cold Feed Extruder, 16:1 L/D, 100 HP 500 VDC motor, vacuum vented screw, forced lube system, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
JUST ADDED!
3.5" NRM #PM-IV, extruder, 32:1 L/D, water cooled, vented & plugged, 100 HP DC, Extech screen changer, spare screw, 1988
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
Model: PM-IV
Year: 1988
3.5 NRM PM IV 32:1 Extruder, 3.5 NRM PM IV 32:1 Extruder.
JUST ADDED!
3.5" NRM #PM70, extruder, 24:1 L/D, non-vented, air cooled, 75 HP DC, 17.4:1 gear ratio, general purpose screw
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
Model: PM70
3.5 NRM PM70 -24:1 N/VENTED AIR COOLED EXTRUDER, 3 1/2 NRM PM70 24:1 Air Cooled Extruder., New cast fin Heaters and Blowers installed 2 Years ago., New RKC Dual Display Controllers and new Relays just installed., Gear Ratio 17.4.1 100 RPM, 75 H.P. D.C. Motor and Drive., Purpose Screw.
3.5" NRM #Profilemaster, extruder, 24:1 L/D, 60 HP, 42.5" centerline, Eurotherm 808 controller
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Model: PROFILEMASTER
Used 3.5" NRM Profilemaster Extruder, S/N: 17749, Vintage: 09/1980 24:1 L/D, Belt Driven, 16.95.1 Ratio NRM Gearbox 42.5 Centerline Height, Round Feed Throat, Air-Cooled Barrel Clamp Barrel Flange, Screw and Hopper Included 60HP DC 1750 RPM Emerson Motor Fan Cooled Emerson Spectrum Drive, 100 Amps, Eurotherm 808 ...more
JUST ADDED!
3.5" NRM, extruder, 32:1 L/D, vented, air cooled, 125 HP DC, Control Techniques Mentor II drive, 15:1 gearbox, 6 barrel zones
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
3.5 NRM 32:1 Vented Air Cooled Extruder, 3.5 NRM 32:1 Vented Air Cooled Extruder, 32:1 Air Cooled 15:1 gearbox ratio 125 HP DC motor Control Techniques Mentor II DC Drive 6 Barrel Zones 9 Zones panel unitized on base, with hopper.
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.88:1 G/B, 75 HP, variable speed drive, 1997
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1997
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.88:1 gearbox ratio, US Motors 75 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, date 8/1997, S/N T78035.
3.5" NRM, cold feed extruder, 12:1 L/D, 75 HP, 1750 RPM, 500 VDC motor, roller feed/power feed roll, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Rebuilt NRM 3.5" 90mm 3 1/2" Cold Feed Rubber Extruder, 12:1 L/D, 75 HP 1750 RPM 500 VDC motor, 24.9:1 gearbox ratio, roller feed / power feed roll, approximately 14 week delivery.
3.5" NRM, cold feed rubber extruder, 12:1 L/D, 24.9:1 gearbox ratio, 75 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) Used NRM 3.5" 90mm Cold Feed Rubber Extruder, 12:1 L/D, 24.9:1 G/B ratio, US Motors 75 HP DC, 1750/2100 RPM, 500 VDC motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication, S/N T61335.
3.5" NRM, cold feed rubber extruder, 8:1 L/D, 20.64:1 gearbox ratio, 50 HP, 1750/2100 RPM
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
One (1) NRM 3.5" 90mm Cold Feed Rubber Extruder, 8:1 L/D, 20.64:1 gearbox ratio, Reliance 50 HP 1750/2100 RPM 500 VDC motor, straight delivery head, forced lube system, non-power feed roll type, S/N T37835.
JUST ADDED!
3.5" Polytruder, extruder, 24:1 L/D, air cooled, 75 HP Baldor DC, ABB drive, 11.2:1 gearbox, 2 screws, 5 barrel & 4 die zones
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Polytruder
3.5 Polytruder 24:1 Air Cooled Extruder, 3 1/2 24:1 air Cooled Polytruder, 5 Barrel Zones Omron E5EK-AA2-N-R3M2., 4 Die Zones E5EN-R3MT-500., 9 Amp Meters, 2 Piece Head Clamp, Hopper with Cover, Melt Temp and Melt Pressure, Die Holder, Gear Box Ratio 11.2.1, Belt Drive, 75 H.P. Baldor Marathon Blue Max Motor D.C. ABB ...more
3.5" Prodex #35T, Single Screw Extruder, 24:1 L/D, vented, air cooled, 50 HP DC motor, Nidec Control Techniques drive, 15.3:1 gearbox ratio
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Prodex
Model: 35T
Used Prodex 35T Extruder for Sale. This single screw extruder has a 3.5″ screw with a 24:1 L/D ratio, an air cooled and vented barrel, and is driven by a 50 HP DC motor through a Nidec Control Techniques DC drive with a 15.3:1 gearbox ratio. The barrel and drive panel are unitized on a common base, and the ...more
JUST ADDED!
3.5" PTI #3500, extruder, 90mm, 32:1 L/D, dual bolt screen changer, Maag gear pump, static mixer, PET screws, 2014, Never Used (2 available)
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Pti
Model: 3500
Year: 2014
3.5 (90 mm) PTI Extruders (2) New 2014 NEVER BEEN USED !, Below is the co-extruders we have for sale (Two Available ) both same year New 2014 both never been used, PTi Model 3500 (3.5/90mm) 32:1 L/D Extruder A New 2014 never been used, PTi Dual Bolt screen Changer, PTi/Maag Model 70 Gear pump system, PTi Model 3500 ...more
JUST ADDED!
3.5" Sterling, extruder, 24:1 L/D, 100 HP, electrically heated, air cooled
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
3-1/2 Sterling Extruder., 3-1/2 Sterling Extruder., 100 HP 24:1 L/D, Screw & control cabinet are fairly new. Electrically heated, air cooled.
3.5" Sterling, Extruder, electrically heated, 21:1 L/D ratio, 120 RPM screw, 50 HP, 230/440 V
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sterling
Sterling Extruder, 3.5" Dia. 21:1 L/D Ratio - Electrically heated with a screw RPM of 120. Powered by a 50 HP motor for 230/440V operation. Serial number 35247., Diameter: 3-1/2", Basis: FOB.
3.5" Welding Engineers, Single Screw Extruder
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Welding Engineers
Used Welding Engineers 3.5" single screw extruder, belt drive, on casters.
3.5" Welex #350-30:1-LH, Extruder, 30:1 L/D, vented water cooled barrel, 5 zones, 100 HP Baldor motor, Athena X400 controls, 460 Volt, 1984
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Welex
Model: 350 30:1 LH
Year: 1984
Used Welex 350 30:1 LH (1984) Extruder for Sale. This unit has a 3.5″ screw with a 30:1 L/D ratio, a vented barrel, and a water cooled design with five cooling zones. Drive power comes from a 100 HP Baldor motor rated at 1750/2000 RPM, running through an SSD Motor Drive/DC Integrator/590+ Series drive. Heat is ...more
3.5" Welex #350-30:1-LHV, single screw extruder, screen changer & melt pump, 56" centerline, 30:1 Water Cooled Barrel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 350-30:1-LHV
Used 3.5" Welex Single Screw Extruder, Model 350-30:1-LHV, 30:1 Water Cooled Barrel Welex Gearbox, Type PEDS560, 430hp Capacity, Gearbox Ratio 7.7:1, GB Serial Number: 71092783-4 5 Barrel Zones, Water Cooled, 2hp Water Recirculation Pump with Heat Exchanger 56" Centerline Yasakawa A1000 AC Drive - 460/60/3 - 207Amps ...more
3.5" Welex #350-RHNV, extruder, 75 HP, 24:1 L/D, 11.8:1 ratio 153 HP Welex PEZS36.width gearbox, 42.5" centerline
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Model: 350-RHNV
Used 3.5" Welex 24:1 Extruder Model 350 RHNV S/N: 24255784 Belt Driven, 11.8:1 Ratio 153HP Welex PEZS36.W Gearbox, 42.5 Centerline Height, Square Feed Throat, Air-Cooled Barrel Screw and Hopper Included, Clamp Barrel Flange 75HP DC 1750 RPM WER Industrial Electrostat Motor Fan Cooled Emerson Spectrum Drive, NEW Novus ...more
JUST ADDED!
3.5" Welex, single screw extruder, 30:1 L/D, water cooled, 430 HP capacity, Yaskawa A1000 drive, screen changer, melt pump, no motor, 480 V.
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Welex
3.5 Welex 30:1 Extruder, 3.5 WELEX EXTRUDER SINGLE SCREW, Screw Diameter 3.5, L/D Ratio 30:1, Barrel Zones 5, HP Capacity 430 HP, Type of Cooling Water Cooled, Electrics 480V, Pump 2 HP Recirculation Pump with Heat Exchanger, GB Serial Number 71092783-4, Amps 600 Amp Breaker, Drive Type Yasakawa A1000 AC Drive ...more
3.5" Theysohn #TSK-090, twin screw co-rotating compounding line, 36:1 L/D, 300 RPM, 1,102 lb/hr, underwater pelletizer
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: TSK-090
used- theysohn tsk 090, 90 mm twin screw co-rotating compounding line. plastic compound and masterbatch, pe, pp 500 kg/h. segmented screw and barrel. 36 ld. underwater pelletizer. pellet water cooler and centrifuge dry system. n: 300/1 min. gearbox reduction.
3.54" Krauss Maffei #KMD-2-90Z, Counter-Rotating twin screw extruder, oil cooled, 40 HP, SCR Control
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Krauss Maffei
Model: KMD-2-90Z
used- 90mm krauss maffei model kmd90 counter-rotating twin screw extruder, 20:1 l/d. has electrically heated oil cooled barrel. driven by 40hp dc motor with scr control. includes temperature control panel.
3.54" Lima Extrusion Profile, co-extrusion line, 28:1 L/D Air cooled Barrel, Pmron Touchscreen Control, calibration table, 2022
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Lima Extrusion
Year: 2022
Used 90mm Lima Extrusion Profile Co-Extrusion Line, New in 2022 90mm Lima Parallel Twin Screw Extruder, 28:1 L/D Air cooled Barrel 110KW AC Motor/Drive Package Omron Touchscreen Control 460/3/60 65mm Lima Extrusion Conical Twin Screw Extruder, Air Cooled Barrel 70KW AC Motor/Drive Package Omron Touchscreen Control ...more
3.54" Shangdong Tongjia, extruder, 28:1 L/D, 50 HP, 1176 RPM, IP54 enclosure
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Shangdong Tongjia
Model: 25IN25
90MM Shangdong Tongjia JG/PS90 Extruder, 28:1 L/D, 50 HP 5 Barrel Zones, 2 Downstream Zones, Air Cooled 50 HP Siemens BEIDE Three Phase Asynchronous Inverter Duty Motor, 1176 RPM, Model TYB1002 2CC2 9 0AA5 Z 250M IM B3 Ceramic Band Heaters With Independent Digital Zone Temp Controllers 45MM Shangdong Tongjia JG/PS45 ...more
3.54" SML #Cast-Coex-7, 7-Layer Cast Film Extrusion Line, 98" film width, 122" die width, 12-70 micron, double chill roller, 2008
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Sml
Model: CAST COEX 7
Year: 2008
SML MODEL CAST COEX 7 Y LAYER CAST FILM LINE, MFG 2008, 98"(2500mm) FILM WIDTH, NOMINAL CAPACITY 10141LB/4600kg PER HOUR, AT THE REWINDER 6062LB/2750kg PER HOUR, STRETCH FILM LLDPE, LAYER 1 SCREW DIAMETER 75, GRAVIMETERIC DOSING UNITS WITH 4 COMPONENTS THAT MAKE DOTECO, HYDRAULIC SCREEN CHANGER WITH AC MOTOR, LAYER 2 ...more
JUST ADDED!
3.6" Jinhu, twin screw extruder, 92mm, 150 HP, ABB drive, spare distributor & reduction gearboxes, 1288 hours, 480 V.
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Jinhu
92 mm Jinhu Twin Screw Extruder for PE, 92 mm Jinhu eTwin Screw Extruder, 150 HP, 480 volt with a ABB drive, 1- Spare Distributor gear box, 1-Spare Reduction gearbox, 1288 running hours, COMPLETE THIS EXTRUDER WAS PROCESSING PE.
JUST ADDED!
3.9" Erema #1310T, recycling line, 100mm, 1,200 lb/hr PP, 328 KW, water bath, new screw 2019, 480 V., 2007
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Erema
Model: 1310T
Year: 2007
EREMA Model 1310T Recycling Line New 2007, EREMA 100 mm Model 1310T Recycling Line New 2007, Capacity 580 Kg/hour, 328 Kw, Electrics: 480-3-60, 503 AMPS, Rated power/current: 328 Kw, Water bath included, Rated at 1200 pounds per hour PP (580 Kg./h), This unit can be seen under power in plant in USA, NOTES: In 2019 New ...more
3.93" Leistritz #ZSE-100-GLAAX, co-rotating screw extruder, 442 HP, 1600 RPM DC motor w/SCR Control, 2002
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Model: ZSE-100-GLAAX
Year: 2002
Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model #ZSE100 GL/44D, serial #3092, new 2002. Has electrically heated water cooled vented barrel, missing water cooling system. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft ...more
3.94" Leistritz #ZSE100GL/44D, co-rotating twin screw extruder, 442 HP DC motor, Eurotherm temperature controllers, 2002
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE100GL/44D
Year: 2002
Used 100mm Leistritz Co-Rotating Twin Screw Extruder, Model ZSE100-GL/44D, 442hp, New in 2002 442hp Direct Drive DC Motor, 1600 RPM with DC Drive Electrically Heated Water Cooled Vented Barrel Model ZSE100-GLAAX Gearbox, 5000 Newton Meters per Shaft Torque Capability 300 rpm Screw Speed Twin Screw Side Feeder Strand ...more



















































