401 - 450 of 460 listings
Berstorff, 125 HP, 6 Meter x 180mm twin screw extruder reactor, 1994
Transamerican Equip Co LLC | Tuscaloosa, AL
Category: Extruders and Extrusion Lines
Seller: Transamerican Equip Co LLC
Location: Tuscaloosa, AL
Mfr: Berstorff
Year: 1994
1994 Berstorff 125 HP 6 Meter x 180mm Twin Screw Extruder Reactor 30,000 Flender process speed reducer Consists of:, Screws, Barrel, Die, Outlet flange, 2 Heating zones, 2 Cooling zones, 4 Circulation pumps, Shaft equipment packing, Integral heat transfer jackets, Includes AC variable speed drive, TEBC inverter duty ...more
Black Clawson, Davis Standard #4.5-EXTR-B, extruder, 30:1 L/D ratio, 2.5", 2009
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Black Clawson
Model: 4.5-EXTR-B
Year: 2009
Make: Black Clawson Davis Standard, Model: 4.5 Extruder, Year: 2009, Machine Location: Upon Request, Extruder #1: 2.5″, 30:1 L/D Ratio, Process Tension Ranges *1: Low Range 5 – 50 Lbs. / High Range 50 – 150 Lbs., Extruder #2: 2.5″, 30:1 L/D Ratio, Hand of Machine Except Winder/Drive Side *4: ...more
Buss #MKS-30, laboratory Ko-Kneader extruder, 1.18" diameter x 17" length, 1997
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Buss
Model: MKS-30
Year: 1997
used- buss model mks 30 laboratory ko-kneader extruder 30 mm screw, 30 kg/hr capacity, 10 hp drive. s a 30 mm diameter x approximately 17" long single screw with throughput rates up to 30 kg/hr, 3-zone electrically heated and water-cooled barrel, and water-cooled feed throat with hopper. powered by a 10 hp, 3-phase ...more
Caleva #100/200, Production Scale Gear Type Extruder, 100/200 kilo/hr., 7.5 kW Drive
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Caleva
Model: 100/200
Used Caleva model 100/200 production scale gear type extruder. Rated 100/200 kilo/hour. Contra rotating extrusion gears. Skid mounted. With 7.5 kW drive., CALEVA 100/200.
Chi Chang Machinery Enterprise Co., Ltd #CC-BS-85-65D-1800W, extruder, bubble wrap system, 3 layer, 72' wide, 2016
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chi Chang Machinery
Model: CC-BS-85-65D-1800W
Year: 2016
Air bubble sheet extrusion line 85/65mm 2-layer designed for processing LDPE resin into protective bubble packaging material. The system produces material up to 72" (1829 mm) wide with thickness range of 0.0250.15 mm. Bubble sizes include 3/8" x 1/8" and optional larger configurations. Production speed is rated at ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
JUST ADDED!
Cincinnati Milacron #TC-86, CM-80 & CM-111, twin screw extruders, AC motors, vacuum pump & oil unit, LOT of 13
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Cincinnati Milacron
Model: TC-86
Cincinnati Extruders (TC 86mm) CM 80 CM 111(Several of each), (3) Cincinnatti Milacron TC-86 Extruders all of which are in excellent condition. AC Motors, (7) CM-80 Extruders that have been converted to 84mm Barrel and Screws and Adapters. 100 HP AC Motors, (2) Cincinnatti Milacron CM-80HP Extruders 100HP AC Motors ...more
Cincinnati Milacron, 2-Roll Sheet Take-Off, 34" Face x 18" diameter Rolls, 4 diameter x 34" width Pull Roll Stand
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cincinnati Milacron
Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with 5 HP, 1750 DC motor through a Koellmann gearbox with 18.131:1 ratio, SCR motor controller, pull roll stand ...more
Cincinnati Milacron Horizontal Sheet Line Downstream, 66" width x 12" diameter rolls, 4.55 FPM, w/ gantry cranes & conveyor, 5500 hours, 2012
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Year: 2012
Used 66" Wide Cincinnati Milacron Horizontal Sheet Line Downstream, New In 2012 66" Wide x 12" Diameter Rolls Hydraulic Roll Pressure 4.55 FPM Line Speed Rolls Individually Driven By.5 HP 1760 RPM Baldor Vector Duty Motors Through 1206:1 Gearboxes 66" Wide X 8" Diameter Rubber Pull Rolls, 4.55 FPM, Driven By 1 HP 1750 ...more
Crown Single Screw Extruder, 2.5" diameter, 36:1 L/D Ratio, Rebuilt To Specification In 2015
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Crown
Year: 2015
Make: Crown, Model: 2.5" Single Screw Extruder, Year: 2015, Machine Location: Upon Request, Expected Rate: 10-200 Kgs/hr., Extruder : 2.5” Dia., 36:1 L/D Ratio, Barrel Centerline: 40″, Horsepower: 75HP, Drive: AC, Screw RPM: 140, Max PSI: 10,000, # of Barrel Zones: 5, Cooling: Closed Loop Cooling System ...more
Davis Standard #MV35IN35SR, extruder, 7 zone, electrically heated, water cooled, 1987
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Davis Standard
Model: MV35IN35SR
Year: 1987
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5.67:1 REDUCTION RATIO AND IS RATED AT 158 HP AT A SERVICE FACTOR OF 1.25. GEARBOX IS BELT DRIVEN BY A 200 HP ...more
Davis Standard 3-extruder sheet extrusion line, 4.5"/3.5"/2" extruders, 54" die, 3-roll downstack, Maag EX90-5GP melt pump
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: SHEETLINE
Used Davis Standard Sheetline Extruder for Sale. This complete sheet line is built around three extruders: a 4 1/2″ Model 45T (450) Thermatic with 32:1 L/D ratio, water cooling, Control Techniques SPMD1403 inverter drive, 250HP motor and 2019 Nordson screen changer; a 3 1/2″ Model 35 Thermatic with 24:1 ...more
Entex #TP-WE-150/600-M1, planetary roller extruder, 75KW, Allen Bradley Panelview Plus 1500 Touchscreen control panel, 2014
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Entex
Model: TP-WE 150/600-M1
Year: 2014
Entex Planetary Roller Extruder, Model TP-WE 150/600-M1, 75KW, New in 2014 Knodler Direct Drive Motor/Gearbox Sytem: 75KW Screw/Central Spindle Speed: 50rpm Allen Bradley Panelview Plus 1500 Touchscreen Control Panel 480/3/60 Two Station Feed System with Schenck Process Feeders, Model MechaTron GRLS27 Parts Included: ...more
JUST ADDED!
Erema #COAX, ecoSAVE recycling pelletizing line, cutter/compactor extruder, up to 600 lb/hr PP, low hours, 2011
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Erema
Model: COAX
Year: 2011
EREMA RECYCLING PLANT COAX 2011 Eco Save- NEW 2011 LOW HOURS, EREMA RECYCLING PLANT COAX 2011 Eco SAVE NEW 2011 LOW HOURS, EREMA recycling systems are used for the recycling of thermoplastic waste., Recycling is implemented in one operating step by means of the COAX@, plant (cutter / extruder combination)., The new ...more
Pure Loop #EVO-302-E, plastic reclaim extrusion line w/ shredder, 3-1/8" extruder, 268 HP, Erema filter, 2018
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Erema
Model: EVO-302-E
Year: 2018
Pure Loop Reclaim System With Integrated Shredder-Extruder Combination Model ISEC EVO 302 E Estimated Output Per The Manufacturer: 800-1,000 LBS/HR PA 6.0 Pa6.6 800-1,000 LBS/HR PET Infeed Belt Conveyor With Double Layer Metal Detector Twin Screw Volumetric Feeder For Powder Shredder With 29" X 35" Cutting Chamber ...more
JUST ADDED!
Erema #INTAREMA-1512-TVEplus, pelletizing line, ecoSave, preconditioning densifier, 250 KW, 850-1250 kg/hr, 8505 hours, 2018
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Erema
Model: INTAREMA-1512-TVEPLUS
Year: 2018
EREMA INTAREMA 1512-TVE Plus Pelletizing Line New 2018, Erema Intarema 1512_TVEplus Pelletizing Line Used Erema Intarema 1512_TVEplus Pelletizing Line, nominal capacity range 850-1250kg/hr depending on feed material, currently with 8505 run hours consisting of the following: -FB_7000_1100_SH cleated feed conveyor ...more
Farrel Continuous Compounding Line, FCM-UM Mixer, Hot Melt Extruder, Gala Underwater Pelletizer
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Farrel
used- farrel continuous compounding line, consisting of: farrel model 6 fcm-um continuous mixer, serial#65a2189-2. driven by a 600hp westinghouse motor. farrel 10" hot melt extruder. screen changer. gala underwater pelletizer system. gala spin dryer with dewater system. acrison feed system w/ 6 additive feeders. heat ...more
Farrel, 18" x15" rubber dump extruder strainer, drop extruder, 29.2:1 G/B ratio, 400 HP
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 6330 - One (1) Used Farrel 18x15" Rubber Dump Extruder, drop extruder, hot feed extruder, feed opening 26" wide x 23.5" deep, 29.2 gearbox ratio, 400 HP 850/2000 RPM, 500 VDC motor, REBUILT SCREW & BARREL, dump drop extruder for F270 or #11D size mixer, serial no. 67AK5877. NOTE: Strainer head & ...more
Farrel, 15" rubber dump extruder, drop extruder, hot feed extruder, 200 HP, pneumatic stuffer ram
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 6328 - One (1) Used Farrel 15" Rubber Dump Extruder, drop extruder, hot feed extruder, feed opening 36" wide x 24.5" deep, stuffer ram 35" wide x 8" thick with 13" stroke, 95:1 total gearbox reduction (19.4:1 primary gearbox X 4.93 secondary gearbox), GE 200hp 1150/1800 RPM 500 VDC motor, enlarged feed section ...more
Battenfeld, Gloucester, horizontal sheet line, 56" wide, Proface touch screen, 480 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barrel, Model 3.5TM III-30, S/N 87089, New In 1987 54" Wide EDI R75 Sheet Die, Includes Extra Die Lips 56" Wide X ...more
Gloucester, 54" wide co-extrusion sheet line, polypropylene sheet, approx 1200 lb/hr., 2006
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Year: 2006
Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet., 2006 Gloucester Engineering sheet line, ideal for extrusion and sheet production. s a 6" vented extruder, control cabinet, and 3.5" co-extruder. Includes screen changers ...more
Hartig extruder, 30:1 L/D pelletizer, used
Alan Ross Machinery Corp | Zion, IL
Category: Extruders and Extrusion Lines
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hartig
150 HP Motor, 480 Volts, Non-Vented Extruder, Air Cooled, 150 HP Motor, 480 Volts, DC Drive w/ Screen Changer, 4 1/2" Screw & Barrel Diameter, 11' Long Screw.
JSW #CMP-305X-12SW, extruder, 66000 lb/hr, 6000 HP, 12:1 L/D, 216 RPM, gear pump, underwater pelletizer, screen changer, 1995
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Jsw
Model: CMP-305X-12SW
Year: 1995
ITEM NO : 101624 QTY : 1 MANUFACTURER : JSW MODEL : CMP-305X-12SW L/D : 12:1 HP : 6000 RPM : 216 SCREEN CHANGER Y/N : Y MFG. BY JWS (JAPAN STEEL WORKS) IN 1995; 66,000#/HR CAPACITY; 216 RPM MAX HIGH SCREW SPEED; 156 RPM MAX LOW SCREW SPEED; FOUR BARREL SEGMENTS; INCLUDES: 30-5101 MAIN MOTOR; 63-5002 GEARBOX STARTING ...more
JUST ADDED!
Leistritz #LSM-30/34, Extruder System, 13 KW, 240 Volts, 1986
Myers Demolition & Excavation | Monaca, PA
Category: Extruders and Extrusion Lines
Seller: Myers Demolition & Excavation
Location: Beaver, PA
Mfr: Leistritz
Model: LSM-30/34
Year: 1986
$12,900 OBO Year: 1986 Model: LSM 30/34 Buyer is responsible for disconnection, rigging, loading and removal. Ground floor access with garage door opening.
JUST ADDED!
Leistritz #LSM 30/34, Laboratory Extruder, Acrison feeder, 1983
Myers Demolition & Excavation | Monaca, PA
Category: Extruders and Extrusion Lines
Seller: Myers Demolition & Excavation
Location: Beaver, PA
Mfr: Leistritz
Model: LSM-30/34
Year: 1983
$14,000 OBO Year: 1983 Model: LSM 30/34 Buyer is responsible for disconnection, rigging, loading and removal. Ground floor access with garage door opening.
Leistritz #Micro18-GGL, Pelletizing Line, 0.7" screws, counter rotating, 40:1 L/D, 8 section, water cooled, w/ SCR Control, die & rod
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MICRO18-GGL
Used-Leistritz Twin Screw Extruder, Model Micro-18-GGL. 18mm, counter-rotating screws, 40:1 l/d, 500 rpm screw speed. Electrically heated, water cooled barrel with a 2.3 kw, 210/260 volt dc motor. SCR controller, (8) barrel sections with (1) jacketed feed (1) vented, (1) vented and plugged, (5) non-vented barrel ...more
Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, vented, water cooled, 250 HP, Scheer Bay SGS-100E pelletizer, 2001
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Leistritz
Model: ZSE 60 GL-36D
Year: 2001
Used Leistritz ZSE 60 GL-36D (2001) Extruder for Sale. This twin screw extruder has a 36:1 L/D ratio, is vented and water cooled, and is driven by a 250 HP Reliance DC motor. The line includes a Scheer Bay pelletizer, Model SGS-100E, and is an (8) component hopper blender (condition unknown), air system, stainless ...more
Leistritz #ZSE27-MAXX-40D, Lab Sheet Line, 29.8 kW, 1200 RPM, 320 hours, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE 27 MAXX-40D
Year: 2018
used-leistritz lab sheet line, includes the following- leistritz extruder, model zse27 maxx-40d. 29.8 kw main drive, 1200 rpm screw speed. 320 hours. (4) schenck feeders. (2) aec chilling units. (1) sterlco unit. (1) water trough. calendaring web handling stack system (roll stack os2):web alignment (pull roll 2 nip ...more
Marshall & Williams, Welex co-extrusion sheet line
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Marshall & Williams
Used Co-Extrusion Sheet Line by Marshall & Williams / Welex. s 1.5" and 2.5" extruders, 7-layer Cloeren co-ex block, 28 flex lip die, and Marshall & Williams sheet extrusion stack. Ideal for acrylic resins and color concentrates., Co-Ex Sheet Extrusion Line Consisting of the Following:, 1.5" Davis Standard ...more
JUST ADDED!
NGR #C-GRAN-165-170-V-HD, recycling pelletizing system, cutter compactor, 2,230-3,700 lb/hr, roll feeder, Ettlinger melt filter, screen changer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Ngr
Model: C-GRAN-165-170-V-HD
NGR Plastic Recycling Pelletizing System Model C: GRAN 165-170 V HD, NGR Plastic Recycling Pelletizing System Model C: GRAN 165-170 V HD, Upgraded hardened wear resistant screw & barrel, 2230-3700 lbs./hour, Inclined Conveyor with Metal Detector, 600mm RF600-DD Roll Feeder, Closed water circuit on Vsacuum System ...more
Nordson #EX-007, hot melt adhesive extruder, 6096909 Industrial Glue System
R&R Electrical Engineering LLC | Greenville, OH
Category: Extruders and Extrusion Lines
Seller: R&R Electrical Engineering LLC
Location: Greenville, OH
Mfr: Nordson
Model: EX-007
Year: 2023
Nordson EX-007 Hot Melt Adhesive Extruder – P/N 6096909, Manufacturer: Nordson Model: EX-007 Part Number: 6096909 Configuration: EX-007-NXX1X2XXGXX1LXXX Temperature Sensor: NI 120 Maximum Temperature: 200°C Hose Connection: 8 mm Hose/Gun Connections: 1 H&G Hopper Level Sensors: 2 Hopper Empty Hopper Nearly ...more
NRM single screw extruder, 34:1 L/D, air cooled, vented, 300 HP DC motor
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Nrm
Used NRM Extruder Single Screw Extruder for Sale. This NRM single screw extruder has a 34:1 L/D ratio and is both air cooled and vented. Drive is a 300 HP DC motor and drive package, with Temco digital temperature controllers handling zone control. Power requirement is 460v – 3 ph – 60hz. The machine can ...more
Oliver #BCS-10 Extrusion Hot Saw
National Machinery Exchange | Newark, NJ
Category: Extruders and Extrusion Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Oliver
Model: BCS-10
, SAW BLADE DIAMETER: 32", HEAD STROKE: 26", LENGTH OF RAILS: 30 APPROX., TYPE DRIVE TO SAW BLADE: BELT, - HYDRAULIC OPERATED HOLDDOWN, - TILT SAW HEAD, - MOTORIZED TRAVEL, MOTOR DRIVE: 50 HP, 230/460/60/3, 1740 RPM - SAW HEAD, 1/2 HP, 208/230/460/60/3, 1725 RPM - TRAVEL, 5 HP, 180/330/50/3, 1425 RPM - HYDRAULIC UNIT ...more
PTI strand die pelletizing line, 32:1 L/D vented extruder, 200 HP, 800-1,200 Lbs/Hr, PTI Control, 1992
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Pti
Model: STRAND DIE PELLETIZING LINE
Year: 1992
Used PTI Strand Die Pelletizing Line (1992) Extruder for Sale. This vented extruder runs a 32:1 L/D ratio with 125 RPM screw speed, driven by a 200 HP Emerson DC motor through an Emerson Quantum II DC drive, with a PTI control panel and six barrel zones, three screen changer zones and three die zones. Approximate ...more
PTI #Trident-6500, sheet extrusion line, 6.5", 500 HP
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Pti
Model: TRIDENT-6500
used- pti trident sheet extrusion line, model 6500. 6.5" screw diameter. 36:1 l/d. 500 hp, 1800 rpm main drive. with flender gearbox; pti model h6018 sheet takeoff system; revolution roll stand; edi 54" w dies; sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of ...more
Randcastle Microtruder #RCP-0375, Extruder, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, 2010
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Randcastle
Model: RCP-0375
Year: 2010
Used 0.375" Randcastle Microtruder extruder, model RCP-0375,.375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section,.75 hp, 230 volt motor, 15:1 gearbox ratio, control panel with (3) barrel, (1) adaptor, (1) die zones and motor vfd controller, serial# J1935, built 2010.
Randcastle Microtruder #RCP-0375, Extruder, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, 2010
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Randcastle
Model: RCP-0375
Year: 2010
Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed.375" Randcastle Microtruder extruder, model RCP-0375,.375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section,.75 hp, 220 volt motor, 15:1 gearbox ratio, control panel with (3) barrel, (1) adaptor, (1) die zones and ...more
Reifenh #RH-501-1-70-33-V, plastic pellet extrusion extruder
JM Industrial LLC | Millwood, WV
Category: Extruders and Extrusion Lines
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Reifenh
Model: RH-501-1-70-33-V
Used 55mm Bore Reifenh user Plastic Pellet Extrusion Extruder, Typ: RH-501-1-70-33-V, Single screw, Vented and plugged, Air cooled; Electrically heated., Suitable for HDPE and many other types of plastics.
Reifenhauser, 3 meter wide (112" finished) 5-layer cast film extrusion line, less extruders, 2011
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Reifenhauser
Year: 2011
Used Reifenhauser 3 Meter Wide (112" Finished) 5-Layer Cast Film Extrusion Line (less extruders). New 2011. Package previously used for EVA, ULDPE, LLDPE, LDPE, with a majority of the product last run on the PP. Also HP423, PRO-FAX6331, PRO-FAX8523, RP323. Line was originally (4) extruders, 180mm, 100mm, 100mm, 60mm. ...more
Umang Pharmatech #UDRE-65(E), Stainless Steel die roller extruder, manually operated, 2007
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Umang
Model: UDRE-65
Year: 2007
Used Umang Pharmatech Stainless Steel Die Roller Extruder, Model: UDRE-65(E), Machine #: 09, Year: 2007, 1.2mm die and ammeter, iris valve with table 6" - manually operated, 5 liter 316 stainless steel hopper, Extruder: 65E perforated die roller 0.8mm, 2007 UMANG PHARMATECH UDRE-65(E).
Reiser Vemag #Robot-500, Extruder, Vacuum Fill, Double Screw, 0.01-66 lbs., 450 portion/min, 5.4 HP, 8.9 CFM, 29 gallon hopper
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Vemag
Model: ROBOT-500
Year: 1900
Make: Reiser Vemag, Model: Robot 500, Year: 1900, Machine Location: Florida, Used Reiser Vemag R 500 Extruder – Vacuum Filler with Double Screw:, – Filling rate: depending on feed element up to 2,500 kg/h, – Portion weight: 5 – 30,000 g, can be set in increments of 0.1 g or 1 g, – ...more
Wahlco #21-2.625-15, high pressure hydraulic extruder, 15 ton, 5 HP, 2.6"ID barrel, 21" long barrel
Ingalls Process Equipment | Painesville, OH
Category: Extruders and Extrusion Lines
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Wahlco
Model: 21-2.625-15
One (1) used 15 ton Wahlco High Pressure Hydraulic Extruder Model 21-2.625 - 15 Serial number A-599 2.6" inside barrel diameter, 21" long barrel 5 HP main motor, 230/460 voltage, 3 phase 1/3 HP Welch Vacuum Pump, single phase Ram speed is variable Controls included Ram retract / neutral / extend controls ...more
Wahlco, laboratory piston extruder, 15 ton, 2.6" ID x 21" long chamber, 5 HP, tilting ram
Detroit Process Machinery | Detroit, MI
Category: Extruders and Extrusion Lines
Seller: Detroit Process Machinery
Location: Detroit, MI
Mfr: Wahlco
STOCK NUMBER: DPM-1880 Tilting Piston Extruder like Loomis. Great for ceramics, teflon, powdered metal, ferrite, refractory, carbide etc. Piston Extrusion process.
Welex #Gala-6, pelletizing line, 30:1 L/D vented barrel & screw, ran 980 Lbs/Hr HIPS
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Welex
Model: GALA 6 PELLETIZING LINE
Used Welex Gala 6 Pelletizing Line Extruder for Sale. This line s a 30:1 L/D ratio vented barrel and screw, and was last running HIPs material at a rate of 980 lbs per hour at 89 RPM. a 2008 BF Spin Away dryer, 4.5″ screen changer with hydraulic power unit, die and water box, a complete Gala 6 underwater ...more
Werner & Pfleiderer #ZSK57, 27:1 L/D, 50 HP, 400 PPH, screws twin bi-lobal, complete
L C Mayfield Associates Inc | Crosby, TX
Category: Extruders and Extrusion Lines
Seller: L C Mayfield Associates Inc
Location: Crosby, TX
Mfr: Werner & Pfleiderer
Model: ZSK-57
JUST ADDED!
Werner & Pfleiderer, twin screw side feeder
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Used Werner & Pfleiderer twin screw feeder.
Werner-Pfleiderer #ZSK-170-M2265, extruder, 1982 (2 available)
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Werner-Pfleiderer
Model: ZSK 170 M2265
ITEM NO : 106801 QTY : 1 MANUFACTURER : WERNER-PFLEIDERER MODEL : ZSK 170 M2265 BUILT IN 1982;.
Werner-Pfleiderer #ZSK-300, extruder, Flender single speed gearbox, W-P #UG500 underwater pelletizer, 100 HP, 900 RPM
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Werner-Pfleiderer
Model: ZSK-300
ITEM NO : 101983 QTY : 1 MANUFACTURER : WERNER-PFLEIDERER MODEL : ZSK-300 SCREEN CHANGER Y/N : N WERNER PFLEIDER; SINGLE SPEED FLENDER GEARBOX; PELLETIZER: MFG. BY W & P; UNDERWATER TYPE; MODEL #UG500; 100 HP; 900 RPM(VARIABLE); 30-254003 MAIN MOTOR; 30-254003.5 AUX. MOTOR; 30-448 PELLETIZER MOTOR;.
Werner-Pfleiderer #ZSK-58, co-extruder, 250 HP, 619 RPM, 500 kg/hr, VFD, Flender #48F1250 gearbox, 2.8261:1 ratio
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Werner-Pfleiderer
Model: ZSK-58
ITEM NO : 106530 QTY : 1 MANUFACTURER : WERNER-PFLEIDERER MODEL : ZSK-58 HP : 250 RPM : 619 GEAR RATIO : 2.8261:1 CO-EXTRUDER; MFG. BY WERNER-PFEIDERER; MODEL ZSK-58; 619 RPM; 250 HP; VARIABLE FREQUENCY DRIVE; 500 KG/HR THROUGHPUT; FLENDER MODEL 48F1250 GEARBOX WITH A 2.8261:1 GEAR RATIO;.
Werner-Pfleiderer #ZSK-170, co-rotating extruder, 24:1 L/D, 4" screw shaft, 6 barrel sections, gear boxes, pelletizer, 1996, Rebuilt 2003
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Werner-Pfleiderer
Model: ZSK170
Year: 1996
ITEM NO : 98923 QTY : 1 MANUFACTURER : WERNER-PFLEIDERER MODEL : ZSK170 SCREW DIAMETER : 102MM L/D : 24:1 COOLING : WATER HEAT TYPE : ELECTRIC SCREEN CHANGER Y/N : Y MFG. BY WERNER & PFLEIDERER IN 1996; REBUILT IN 2003; CO-ROTATING DESIGN; 6 BARREL SECTIONS; DEGASSING BARREL; 173.MM BARREL BORE; 102MM SCREW SHAFT ...more
Zumbach #KW20, surface fault detector, 2.5" W aperture w/2" W open, idler rollers, serial #2795.1535, #46250
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Zumbach
Model: KW20
Used Zumbach surface fault detector, model KW20, 2.5" wide aperture with 2" wide opening with idler rollers, serial# 2795.1353.


















































