13 Results
2.5" Gloucester #2522, single screw extruder, R2, 32:1 L/D, 72" centerline height, 10.73:1 gearbox ratio
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 2522
used-gloucester model 2522 r2 2.5" 32:1 l/d extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 hp d/c motor with saftronics scr control. manual screen changer mounted ...more
2.5" Gloucester Engineering #25225R2, extruder, 32:1, electrically heated, air cooled, non-vented barrel
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Model: 25225R2
Year: 2011
Used Gloucester Engineering Extruder, 2.5", 32:1. Electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor ...more
2.5" Gloucester, single screw extruder, 32:1 L/D, (5) zone air cooled, vented barrel, 45" centerline height
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
used- gloucester 2.5" extruder 32:1 l/d five (5) zone air cooled and vented barrel at a 45" centerline height. top center feed throat. driven by a 50 hp a/c 1750/2100 rpm motor, includes 6 zone temperature control panel and 5-hole strand die.
2.6" Gloucester #25225R2, single screw extruder, 32:1 L/D, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 25225R2
used- gloucester single screw extruder, model 25225r2. 2.5' diameter screw, 32:1 l/d. has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio 13.75:1 and is direct driven in ...more
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester model 35250r2 3.5" diameter single screw extruder. 3.5" diameter screw, 32:1 l/d. has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
3.5" Gloucester #35250R2, single screw extruder, 32:1 L/D, 65" centerline height, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 35250R2
used- gloucester 3.5" single screw extruder, model 35250r2. 3.5" diameter screw, 32:1 l/d. having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio of 18.17:1 and is directly ...more
6" Gloucester #266-001, water ring pelletizing line, 30:1 L/D, air cooled, jacketed feed section, feed hopper, 1990
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: 266-001
Year: 1990
Used 6" Gloucester water ring pelletizing line, with 6" Gloucester extruder, model 266-001, 30:1 L/D, air cooled with Contracool and blower, jacketed feed section, feed hopper, vented barrel, with control panel, machine serial# 266-33392-01, built 1990. Gneub rotary filter screen changer, model SF90, serial# 1190-866. ...more
6" Gloucester, single screw extrusion line, Nordson WRP12V water ring pelletizer, 1990
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
Year: 1990
6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer 6" Gloucester Single Screw Extruder, 30:1 L/D Ratio, Vented Barrel 11.48:1 Gearbox Ratio, Air-Cooled Barrel Using Contracool Blower, 300 HP DC Motor With Safetronics DC Drive 18" L x 7" W Tangential Feed Throat, Model 266-001 New In 1990 460/3/60 ...more
11" Gloucester #GEC, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, #47652
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: GEC
Used 12" Gloucester Mini separator, 480V, 3 phase.
12" Gloucester #406, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, serial #24108-03, 8/1979, #47657
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: 406
Used 12" Gloucester Mini Separator, model 406, 480V, 3 phase, serial# 24108 03, built 8/1979.
Gloucester extruder, 60mm, side vented, 32:1 L/D, top center feed throat, 1986
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gloucester
Year: 1986
Used 2.36 (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45 centerline height. Includes temperature control panel and 5-hole strand die., 1986 Gloucester 60mm.
Gloucester, 54" wide co-extrusion sheet line, polypropylene sheet, approx 1200 lb/hr., 2006
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Year: 2006
Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet., 2006 Gloucester Engineering sheet line, ideal for extrusion and sheet production. s a 6" vented extruder, control cabinet, and 3.5" co-extruder. Includes screen changers ...more
Battenfeld, Gloucester, horizontal sheet line, 56" wide, Proface touch screen, 480 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gloucester
56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barrel, Model 3.5TM III-30, S/N 87089, New In 1987 54" Wide EDI R75 Sheet Die, Includes Extra Die Lips 56" Wide X ...more
