351 - 400 of 460 listings
6" Welex, extruder, 30:1 L/D, 500 HP AC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Year: 1997
6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, Vented and Plugged, 6 Barrel Zones, 9 Die Zones, Direct Driven To 8.7:1 Koellmann Gear Box, With 500 HP Reliance AC Motor, (200 Screw RPM), Tempco Cool Touch Heater Bands, Vented & Plugged Barrel, Vent Located Approx. 120" From Center Of Feed Throat, 10" L x ...more
6" Welex, 27" sheet line, 30:1 L/D, air-cooled, 6 barrel zones, 500 HP Baldor AC motor, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Welex
Year: 2000
67" Wide Welex Sheetline Consisting Of: 6" Welex Extruder, Model 6.0 30D, 30:1 L/D, Air-Cooled, 6 Barrel Zones, 18 Die Zones, Direct Driven To Koellmann UNEX 8.13 Gearbox With 8.74:1 Gearbox Ratio, With 500 HP Baldor AC Motor, 500 HP WEG Drive, S/N 7189, 460/3/60, New In 2000, DOES NOT INCLUDE SCREEN CHANGER Melt Pump ...more
6" OMV #D140-6P, PET Sheet Extrusion Line, single screw, 48" Wide, 2,000 lbs/hr, 350 HP, 2001
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: D140-6P
Year: 2001
used- pet sheet extrusion line capable up to 48" wide, currently has 32"w allied flex-lip extrusion die. 2,000 lbs/hr, omv d140 extruder (used) 350 hp main motor; 30 hp drive system; rated up to 2,000 lbs/hour (dependent on material and configuration); multi-zone cooling rolls; chrome-polished roll stack. omv single ...more
6" Huaxing #HXSJ-150-DWM11, Three-Stage Extrusion Line, 1,3232,205 lbs/hr, 30:1 L/D, 215 HP, 480 VAC, 2019
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: HXSJ-150-DWM11
Year: 2019
used- huaxing three-stage 150mm (6") extrusion line, model hxsj 150-dwm11. 30:1 l/d. rated 600-1,000 kg (approx 1323-2205 lbs.) per hour. consisting of: (1) 150mm x 4500mm (30:1) primary extruder, double vented w/ vacuum system and 2-stage filtration, and (1) 150mm x 1800mm (12:1) secondary extruder, single vented ...more
JUST ADDED!
6.3" Gamma Meccanica #GM-160/37D-Compac, reclaim pelletizing line, cutter compactor, Vecoplan RG60/200 shredder, Erema screen changer, Refurbished
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Gamma Meccanica
Model: GM-160/37D-COMPAC
Gamma Meccanica GM 160 37 D Compac Extrusion Line w/Vecoplan RG60/200 U XL FF T Film & Fiber Shredder, Gamma Meccanica Extrusion Line, Reclaiming line GM 160/37D Compac Second Hand Refurbished, Cutter Compactor GM A/FT 160 with Ecotronic Control & #2 ports for dosing, Nip roll system with stand, hood and ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
6.5" Davis Standard #165MM60TPIH, single screw extruder, 42:1 L/D vented barrel, 500 HP Reliance DC motor, 1989
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 165MM60TPIH
Year: 1989
Used 6.5" Davis Standard Single Screw Extruder, Model 165MM60TPIH 42:1 L/D Air Cooled Vented Barrel, Vent Location 191", Total Barrel 273" 500Hp Reliance DC Motor, 1150RPM, ABB Drive Model DCS Temperature Control Panel with 9 Red Lion Temp Controllers, 645HP Gearbox Capacity with 1.5 Service Factor, 13.4 Gearbox Ratio ...more
6.5" Milacron #PAK-650, single screw extruder, 2018
Meadoworks LLC | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Milacron
Model: PAK 650
Year: 2018
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6012).
JUST ADDED!
6.5" NGR #X-GRAN-165, recycling pelletizing line, 165mm, 40:1 L/D, 370 KW, up to 1200 kg/hr, double degassing, Xaloy EH80 screen changer, 575 V.
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Ngr
Model: X-GRAN-165
NGR X GRAN 165 RECYCLING LINE, NGR X GRAN 165, Material that can be processed: PE, PP, LDPE, HDPE, MDPE, Screw Diameter: 165 mm, Output: Up to 1200 KG./Hour, L/D Ratio: 40:1, Screen Changer: XALOY EH80 HYDRAULIC SCREEN CHANGER, Presure Sensor: 4000 PSI, MPI, Conveyor Belt: Contains 2 High Bonmded Heavy Duty Cleats ...more
7.87" Monsanto Troester, 200mm cold feed rubber extruder, 20:1 L/D, 41.7:1 gearbox ratio
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Monsanto Troester
Item 6122 - One (1) Used Monsanto 8.0" 200mm Cold Feed Rubber Extruder, 20:1 L/D, gearbox ratio 41.7:1, missing screw and feed roll assembly.
8" Berstorff, cold feed silicone extruder, 12:1 L/D, 250 HP, 1150 RPM, belt drive
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Berstorff
One (1) Used Berstorff 8" (200mm) Cold Feed Silicone Extruder, 12:1 L/D, 250 HP, 1150 RPM, 460 VAC motor, power feed roll, straight delivery head, belt drive.
8" Berstorff, 12:1 L/D screw, high output design for polymer extrusion
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Berstorff
One (1) New Berstorff 8" 200mm 12:1 L/D Screw, high output design for polymer extrusion.
8" NRM, hot feed rubber extruder, right hand feed, 20.5:1 G/B ratio, unitized base, 1974
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1974
One (1) Used 8" NRM Hot Feed Extruder, right hand feed, pneumatically adjustable sheet head, GB ratio 20.5:1, unitized base, date 12-74, Order 104353, S/N T-18580.
JUST ADDED!
8" Sterling, single screw extruder, 32:1 L/D, electric, 6 zones, 500 HP
Plantex Equipment Co | Alvin, TX
Category: Extruders and Extrusion Lines
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Sterling
8" Sterling, extruder, 32:1 L/D, 500 HP AC motor w/ new drive, 2021
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Sterling
Year: 2021
Used 8" Sterling Extruder, 32:1 L/D, 500 HP AC Motor With New Drive In 2021 32:1 L/D Ratio, Vented Barrel Two Stage Screw, 500HP AC Motor With Yaskawa Drive(Installed 2 Years ago), 17.4:1 Gear Ratio(Rebuilt In 2002 Per Previous Owner) 5 Barrel Zone Temperature Control Panel. Hopper Unit Will Need Cooling System Work ...more
JUST ADDED!
8.3" Erema #Vacurema-Basic-2321T, PET pelletizing line, 212mm, 27:1 L/D, 315 KW, 5,000 lb/hr, backflush filter, 480 V., 2017
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Erema
Model: VACUREMA-BASIC-2321T
Year: 2017
EREMA 212mm Pelletizing Line New 2017 (PET 5000 LBS/HR), 212 MM EREMA VACUREMA BASIC 2321T PELLETIZING LINE NEW 2017, EREMA MODELVACUREMA BASIC 2321- NEW 2017, ELECTRICAL DATA 480V-60HZ-3PH AND 1123A RATED CURRENT (+-10%), -212MM SINGLE SCREW EXTRUDER DRIVEN BY 315 KW MOTOR, WITH 3S-TECHNOLOGY, 400 KW FREQUENCY ...more
9" Davis Standard #80IN80HT, single screw extruder, 32:1 L/D ratio, water cooled, 44" centerline, w/ gearbox, cooling, continuous screen changer, 2001
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 80IN80HT
Year: 2001
used- davis standard 9" extruder, model 80in80ht. 32:1 l/d ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 gearbox reduction ratio; gearbox rated at 1080 hp at a service factor of 1.5; gearbox is direct driven in a wrap-around manner by a 900 hp reliance ...more
9.84" Krauss Maffei #KE250x30D, Single Screw Extruder, side vented, water cooled, 30:1 L/D, 200 KW, 1534 RPM, 480 Volt, 3PH, 2020
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Krauss Maffei
Model: KE250X30D
Year: 2020
Used Krauss Maffei KE250x30D (2020) Extruder for Sale. This single screw extruder has a 250 mm (9.84″) screw with a 30:1 L/D ratio and is side vented and water cooled. Drive is rated 200 kW / 268 HP at 1534 RPM, with a power requirement of 480v – 3 Ph (348 Amps). The machine was used for R & D ...more
9.84" Werner & Pfleiderer #KP-120/250, KombiPlast Compounder, 6:1 L/D, 132 HP DC drive, ZS-B 120 side feeder, 2004
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Krupp Werner & Pfleiderer
Model: KP-120/250
Year: 2004
used- krupp werner & pfleiderer gmbh kp-120/250 kombiplast compounder. 6:1 l/d. (1) 250 mm diameter screw x 1500 mm long. screw speed: 4,74-47,5 rpm. electrically heated. driven by a 88 kw (132 hp) dc drive motor via a gear box. (1) die head, frame mounted. (1) krupp werner & pfleiderer gmbh zs-b 120 side ...more
JUST ADDED!
10"/6" AET, dual diameter film reclaim extruder, 32:1 L/D, vented, 400 HP AC, Yaskawa drive, Koellmann gear reducer, Xaloy EH80 8" screen changer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Aet
AET 10/6 Dual Diamter Extruder, AET dual diameter 10-6 32:1 L/D 50 centerline height film reclaim extruder with Koellmann gear double reduction gear reducer, with oil pump, heat exchanger cooling system, cast water cooled feed throat with grooved hardened horizontal liner, 4140 SAE barrel with bimetallic liner, vented ...more
10" AET, dual diameter extruder, 32" 1 L/D, vented barrel, 2014
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aet
Year: 2014
Used 10" To 6" AET Dual Diameter Extruder 32:1 L/D, Vented Barrel, 4140 SAE Barrel Bimetallic Liner, 10" Diameter Is 7:1 13.91 Koellmann UNEX 8.12 Gearbox, Rated To 500 HP 10 Barrel Zones, 6 Downstream Zones 400 HP AC Motor With Yaskawa Inverter Drive Xaloy EH80 Slide Plate Screen Changer With Hydraulic Powerpack ...more
10" Davis Standard #100TH100D, single screw extruder, 38:1 L/D ratio, water cooled, 44" centerline, w/ direct dr gearbox, cooling, Trendelkamp screen changer, 1991
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 100TH100D
Year: 1991
used- davis standard 10" extruder, model 100th100d. 38:1 l/d ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 gearbox reduction ratio; rated at 1800 hp at a service factor of 1.5; gearbox currently set to be dual direct driven in back of the gearbox. last ...more
JUST ADDED!
10"/6.5" Davis Standard, dual diameter vented pelletizing line, 35:1 L/D, 500 HP Reliance DC, Beringer screen changer, 1990
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Year: 1990
10/165mm Davis Standard Dual Dia. Pelletizing Line, DAVIS STANDARD DUAL DIAMETER VENTED EXTRUDER 10/165 mm NEW 1990, FEEDING SECTION:, FROM 10 INCHES DIAMETER DOWN TO 165 MM DIAMETER (CONICAL) GROOVED TYPE, GEAR BOX MODEL 165-1000 HP 500 OR KW 372, SAFETY FACTOR 1.32, GEAR RATIO 28:1 DYNAMIC THRUST 1035000 LBS ...more
11" Gloucester #GEC, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, #47652
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: GEC
Used 12" Gloucester Mini separator, 480V, 3 phase.
12" Crown / CDL #RPU2E400, single screw dump extruder, 10:1 L/D ratio
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Crown
Model: RPU2E400
Used 12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio 30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 HP GE DC Motor, Type: CD5010AY ...more
12" Crown / CDL #RPU2E400, single screw dump extruder, 10:1 L/D ratio, temperature Control panel
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Crown
Model: RPU2E400
Used 12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio 30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 HP GE DC Motor, Type: CD5010AY ...more
15" Farrel, Hot Feed Rubber Extruder, 250mm 9.8", 200 HP, 12-20 RPM screw, pneu ram, 13" stroke, http://www.soberaysons.com/Inventory/Details/6205
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 6205 - One (1) Used Farrel 15" Dump Extruder, drop extruder, hot feed extruder, feed opening 36" wide x 24.5" deep, stuffer 35" wide x 8" thick with 13" stroke, 95:1 total gearbox reduction (19.4:1 primary gearbox X 4.93 secondary gearbox), GE 200hp 1150/1800 RPM 500 VDC motor, enlarged feed section, pneumatic ...more
20" Conair #ATC-24, cut and spindle transfer system, 12" wide, 800 FPM, 460 V., 3-Ph., 2021
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: ATC-24
Year: 2021
Used Conair ATC Automatic Cut And Spindle Transfer System, New In 2021 Model ATC-24 Coil Size 20” OD X 12” Wide Independent Servo Drive For Each Reel Traverse Driven By Servo With Ball Screw Separate Floor Mounted Dancer 8” HMI Touch Screen 800 FPM Max. Line Speed Tubing From.125” ...more
20" Macro Engineering and Technology, Inc., coiler/winder, #2618-2
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Maco Engineering
Model: 2618-2
Used Macro Engineering and Technology Inc. turret winder, model ME-T.W.-20-3HP-100, 20" long stainless steel and rubber rolls, 2.55 kW (3.42 hp) spindle and turret motors, with VFDs and PLC controls, serial# TIC-8232, built 8/2000 with attached slitter station, model ME Trim Sltt, 20" chrome, rubber and carbon steel ...more
JUST ADDED!
25" mm Berstorff #25X33D, twin screw extruder, co-rotating, 33:1 L/D, air cooled barrel, 15 HP DC, 1775/2300 RPM, 240 V., (7) barrel zones, 1991
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Berstorff
Model: 25X33D
Year: 1991
Used 25MM Berstorff Twin Screw Extruder, Model 25x33D, electrically heated, air cooled barrel, 25mm co rotating screws, 33:1 L/D, (1) feed, (1) vented, and (5) non-vented barrel sections, 15 hp, 1775/2300 rpm, 240 volt dc motor, Flender gearbox, 2.208:1 ratio, control panel with (7) barrel zones, and motor controller ...more
36" Rosenthal #WM3HUJEAAAPLCC-24, Servo-Driven Sheeter, Integral Unwind, 750 lb, AB Control, 240 V., variable speed, casters
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Rosenthal
Model: WM3HUJEAAAPLCC-24
used- rosenthal model wm3hujeaaaplcc-24, 36" sheeter. integral unwind with 3" air shaft, 6" chucks, brake, and dancer. unwind rated at 750-pound capacity. allen bradley panel view 300 plc control. servo driven. integral variable speed belt run off table. caster mounted. locking feet. 240v. serial# 81227.
40" Werner & Pfleiderer #ZSK-40, Twin Screw Extruder, 44:1 L/D, 1200 RPM, 150 HP, 460V, 3 Ph., 60 Hz, 2005
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Coperion Werner & Pfleiderer
Model: ZSK-40
Year: 2005
used coperion werner & pfleiderer zsk 40 40mm co-rotating twin screw extruder, serial #53002, built 2005. s a 44:1 l/d ratio with maximum screw speed of 1,200 rpm. driven by a 150 hp motor rated for 460 vac, 60 hz, 3-phase power and a flender 1.43:1 ratio gearbox and brunel coupler. extruder barrel is electrically ...more
43" Brown, dual flywheel trim press, 12.5" opening, oper.controls, AC motor, multi-speed gearbox, belt drive to flywheels, #37688
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brown
Model: 37688
Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels.
50" Ton, Jennings #E-50, extrusion preformer, 36" stroke, 14" fan die, 1,480 PSI, 2021
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Jennings
Model: E-50
Year: 2021
Used Jennings E-50 (2021) Extruder for Sale. This unit is rated at 50 ton with a 36″ stroke and a 14″ fan die size, with max pressure of 1480 PSI. It uses a Parker hydraulic pump rated at 5.1 GPM. Extruder electrical requirements are 208V / 40Amps / 60Hz / 3 Ph, and the preformer runs on 208V / 30Amps / ...more
52.2" mm KraussMaffei Berstorff #ZE-52-48D, Twin Screw Extruder, 48:1 L/D, 350 KW, 1.2 TPH, 1200 RPM Max, 400V, 50 Hz, 3 Ph., 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Kraussmaffei Berstorff
Model: ZE-52-48D
Year: 2018
used- kraussmaffei berstoff ze 52-48d twin screw extruder with a capacity 1.2 tonnes per hour (depending on product). (2) 52.2 mm diameter side by side screws, 48:1 l/d ratio, 12 total barrel sections, electrically heated water cooled. driven by a 350 kw( 525 hp) 3 x 400 volt/50cycle/3ph ac drive motor via a ...more
54" Welex 5-layer sheet extrusion line, (5) extruders 3.5" to 1.25", 53" EDI flex lip die, 3-roll stack, gauge, shear, winder
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Welex
ITEM NO : 109101 QTY : 1 MANUFACTURER : WELEX 54" WELEX 5 LAYER EXTRUSION SHEET LINE INCLUDING: MCQUIRE BLENDER FEEDER; (1) 3.5" WELEX EXTRUDER, 36:1 L/D, VENT WITH DC MOTOR AND SCREEN CHANGER, (2) 2.5" WELEX EXTRUDERS, 30:1 L/D WITH DC MOTORS, (1) 2" WELEX EXTRUDER, 24:1 L/D WITH DC MOTOR, (1) 1.25" WELEX EXTRUDER ...more
60" Davis Standard, Co-Ex Sheet Line, 4.5" Extruder 30:1 L/D 300 HP, 3" Co-Extruder, 58" Die, 60" Roll Stack, Shear, Sheet Saws, AB PLC, 2001
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2001
60” Wide Davis Standard Co-Ex Sheet Line Lines Consists Of The Following Pieces: 4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio ...more
66" Davis Standard, coex sheet line, 4.5" & 2" extruders, 32:1 L/D ratio, 300 HP, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2000
66" Wide Sheet Line Consisting Of The Following Pieces: 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Drive(NEW IN 2016), Vented Barrel With 5.36 HP Vacuum Pump, 6 Zone Air-Cooled Barrel, 10 Die Zones, 600 AMP ...more
Adamson United, NFM Welding Engineers calender sheet extrusion line, single screw extruder, 14:1 L/D, 29.2:1 gearbox ratio w/motor, 1999
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Adamson
Year: 1999
Used 48" Adamson United / NFM Welding Engineers calender sheet extrusion line, with Adamson United vertical 130 degree three roll calender mill with top roll offset 50 degrees from vertical, with 18" diameter x 48" roll face, drilled and cored rolls with rotary unions, 64" centerline height, motorized adjustable top ...more
JUST ADDED!
American Tuff Stock, film granulator to strand pelletizing line, recycling, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
AMERICAN TUFF STOCK RECYCLING MACHINERY (NEW) (CHINA) FILM GRANULATOR TO STRAND PELLETIZING LINE, AMERICAN TUFF STOCK RECYCLING MACHINERY (NEW) (CHINA) FILM GRANULATOR TO STRAND PELLETIZING LINE.
JUST ADDED!
American Tuff Stock, dual single screw recycling extrusion line, washed PP/PE film, force feeder, pelletizer, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
Recycling Dual Single Screw Extrusion Lines for washed film PP PE w/force feeder (ATS) NEW, Washed Film PP PE Extruder (with force feeder) ATS (NEW), RMATION:, Screw material is 38CrMoAI Control Cabinet: Inverter Start Below are sizes of Dual Single Screw Extruders (working in tanden) line includes cooling tank ...more
JUST ADDED!
American Tuff Stock, plastic film recycling machine, PP/PE film, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
Plastic Film Recycling Machine (ATS) NEW, Plastic Film Recycling Machine (ATS) NEW.
JUST ADDED!
American Tuff Stock, dual single screw recycling extrusion line, washed rigid PP/PE, quantitative feeder, strand die pelletizer, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
Recycling Dual Single Screw Extrusion Lines -Washed Rigid PP-PE (W/quantitive feeder) NEW, Recycling Dual Single Screw Extrusion Lines -Washed Rigid PP-PE (W/quantitive feeder) NEW, rmation:, Screw Material is 38CrMoAI Control Cabinmet: Inverter Start Below are new dual single screw extrusion lines working in tandem ...more
JUST ADDED!
American Tuff Stock, plastic extruder, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
Plastic Extruder (ATS) NEW, Plastic Extruder (ATS) NEW.
JUST ADDED!
American Tuff Stock, PP/PE rigid plastic extruder, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
PP-PE Rigid Plastic Extruder (ATS) NEW, PP-PE Rigid Plastic Extruder (ATS) NEW.
JUST ADDED!
American Tuff Stock, PP/PE film wet plastic extruder, NEW
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: American Tuff Stock
PP-PE Film Wet Plastic Extruder (ATS) NEW, PP-PE Film Wet Plastic Extruder (ATS) NEW.
Baker Perkin #MPC/V-30, Twin Screw Extruder Compounder, 1985
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: Baker
Model: MPC/V-30
Year: 1985
Used Baker Perkiin twin screw extruder compounder system, model MPC/V 30, 30mm MP mixer driven by hp motor feeding 38mm extruder driven by hp motor, with integrated control console, machine# 605-184, built 1985.
APV Baker Perkins Twin Screw Extruder, type MP50/25D, 25:1 L/D, 2017
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Baker
Year: 2017
used- apv baker perkins twin screw extruder, type mp50/25d. 50 mm dia. twin screws. 25:1 l/d. co-rotating. electrically heated, water cooled. max screw speed 500 rpm via a gearbox by a 55.2 kw (74hp)-3/50/400v ac motor. max output capacity 150 kgs (330 lbs) per hour. complete with feeding system, die head, control ...more
Barwell #C3, rubber preformer, 10" x 55" chamber, 2500 psi, 120 lb. capacity
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Barwell
Model: C3
One (1) Used Barwell C3 Preformer, Barwell_Rubber_Preformer, capacity 120 lbs, 10" x 55" chamber, Motor 460V, 60 Cycle, Max PSI 2500.
JUST ADDED!
Battenfeld #InI-EX2-65, extruder, 1986
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Battenfeld
Model: INI-EX2-65
Year: 1986
Battenfeld InI-EX2-65 New 1986., Battenfeld InI-EX2-65 New in 1986.
JUST ADDED!
Battenfeld #UnI0EX2-90, extruder, 1985
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Battenfeld
Model: UNI0EX2-90
Year: 1985
Battenfeld UnI0EX2-90 New 1985, Battenfeld UnI0EX2-90 New 1985.


















































