1 / 10
Click to zoom in
1 / 10
For Sale by Arlington Machinery
Surplus Record Dealer Since 1998
Location: Lake Zurich, IL
Contact Chris / Garrett
Phone Number: 847...> Show Phone Number 847-957-9731
Let the seller know you found their listing on Surplus Record!
Description
Description
- 66" Wide Sheet Line Consisting Of The Following Pieces:
- 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Drive(NEW IN 2016), Vented Barrel With 5.36 HP Vacuum Pump, 6 Zone Air-Cooled Barrel, 10 Die Zones, 600 AMP Disconnect, 460/3/60, Barrel Clamp, Spare 2 Stage Screw, ABB Microprocessor, Bunting Magnet, NEW Feed Throat, No Hopper
- 4.5" PSI MSC-45, Screen Changer With Accumulator Hydraulic Power Pack
- Xaloy MSDP 275 Melt Pump Drive Through 22.41 SEW-Eurodrive Gearbox By Emerson 20 HP AC Inverter Duty Motor, S/N 2727187, 460/3/60
- 2.5" Davis Standard 25IN25 Extruder, 30:1 L/D, 17.26:1 Gearbox Ratio, 75 HP WEG AC Inverter Duty Motor And Yaskawa F7 Drive, 5 Barrel Zones, 5 Die Zones, 125 AMP Disconnect, 460/3/60, New In 2008, Allen Bradley PLC Control, Manual Screen Changer
- Xaloy MSDP 183 Melt Pump Drive Through 30.22 SEW-Eurodrive Gearbox By 5 HP AC Motor, S/N MS1818507, 460/3/60
- Co-Ex Die Block For 4.5" and 2.5" Extruder
- 66" Wide EDI Ultraflex H100 Die, S/N 14-34250-M Mounted On Davis Standard Die Cart
- 66" Wide X 16" Diameter 3 Roll Sheet Stack, Upstack Orientation, Rolls Are Independently Driven Through Belts And Boston Gear Gearboxes By 2 HP Marathon Black Max Motors, Chrome Top Roll, Middle Embossing Rolls, Chrome Lower Roll, Stack Rolls And Pull Rolls Driven By Parker AC890 Drives, SSD Control Panel For Sheet Line, Oil Heated/Cooled Rolls, 460/3/60
- Approximately 18' Long Cooling Conveyor
- 66" W x 7" Diameter Rubber Pull Rolls
- 84" Wide Cutoff Saw, 3 HP Saw Motor, 3/4 HP Traverse Motor
- 6 Total Rolls, Two Spare Embossing Rolls And One Spare Chrome Roll In Crates
- 3 Sterling/AEC Hot Oil Heaters For Roll Temperature, 24 KW TCOU-3, 36 KW TCOU-3, 75 KW M2B6017, 460/3/60
- Previously Running Acrylic And Polycarbonate .120"-.165" Thick
Get Your Price from Arlington Machinery!
Buyers Who Viewed This Listing Also Viewed:
60" Davis Standard, Co-Ex Sheet Line, 4.5" Extruder 30:1 L/D 300 HP, 3" Co-Extruder, 58" Die, 60" Roll Stack, Shear, Sheet Saws, AB PLC, 2001
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2001
60” Wide Davis Standard Co-Ex Sheet Line Lines Consists Of The Following Pieces: 4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio ...more
70" mm, Coperion Werner & Pfleiderer #ZSK-70-F175E, Twin Screw Extruder, Co-Rotating Compounding System, 23:1 L/D, 6 section, 198 RPM, 1996
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: ZSK-70-F175E
Year: 1996
used- coperion werner & pfleiderer zsk 70 f175e twin screw extruder, co-rotating, (2) 70 mm diameter side by side screws, 23:1 l/d ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. driven by a 108 kw-330-volt ac drive motor via a piv gear box. screw speed maximum 198 rpm. frame ...more
70" Werner & Pfleiderer #ZSK70, Twin screw extruder, water cooled barrel, 200 HP, 1995
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Model: ZSK70
Year: 1995
70MM Werner and Pfleiderer twin screw extruder, model ZSK70, electrically heated, water-cooled barrel, 32:1 L/d, with (1) feed section, (7) non-vented and (2) top-vented barrel sections, 200 hp AC motor, with Kreyenborg two piston continuous screen changer, model AV-050/SONDER, machine# 180881, project# 95-3211, built ...more
50" mm Xinda #PSHJ-50, Compounding Extruder Line, Twin Screw Plastic, 500 RPM, 460 V., 3ph, 2007
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: PSHJ-50
Year: 2007
Make: Xinda, Model: PSHJ-50, Year: 2007, Machine Location: Ohio, Model: PSHJ-50, Barrel Diameter: 50mm, L/D Ratio: 40:1, Output Capacity: Approx. 500 kg/hr (material dependent), Screw Speed: Up to 500 RPM, Main Motor: 45 kW, Heater Power: 28 kW, Water Pump Power: 0.55 kW, Power: 460V / 60 Hz / 3-Phase, s:, Parallel ...more
90" mm Mitsuba #90G-12D-HBET-4294, cold feed 3-1/2", 12:1 L/D rubber extruder with 60HP DC motor and motorized puller and automatic Cut-To-Length line cutter, under power, 1995
Category: Extruders and Extrusion Lines
Seller: DPA Machinery & Appraisals Llc
Location: Ormond Beach, FL
Mfr: Mitsuba
Model: 90G-12D-HBET-4294
Year: 1995
