Manufacturer: Kraussmaffei Berstorff
Model: ZE-52-48D
Year: 2018
Dia.of Screw: 52.20
Stock # 53459037
1 / 5
Click to zoom in
1 / 5
For Sale by Aaron Equipment Co
Surplus Record Dealer Since 2024
Location: Schaumburg, IL
Contact Ken Matuszak
Phone Number: 708...> Show Phone Number 708-412-6077
Let the seller know you found their listing on Surplus Record!
Description
used- kraussmaffei berstoff ze 52-48d twin screw extruder with a capacity 1.2 tonnes per hour (depending on product). (2) 52.2 mm diameter side by side screws, 48:1 l/d ratio, 12 total barrel sections, electrically heated water cooled. driven by a 350 kw( 525 hp) 3 x 400 volt/50cycle/3ph ac drive motor via a eisenbeiss ze-042,5-16,0 gear box. screw speed maximum 1200 rpm. frame mounted, (1) side feeder, (1) control panel. new year 2018. serial # 90205420-0010-2018. previously used in a compounding application.
Get Your Price from Aaron Equipment Co!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
54" Welex 5-layer sheet extrusion line, (5) extruders 3.5" to 1.25", 53" EDI flex lip die, 3-roll stack, gauge, shear, winder
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Welex
ITEM NO : 109101 QTY : 1 MANUFACTURER : WELEX 54" WELEX 5 LAYER EXTRUSION SHEET LINE INCLUDING: MCQUIRE BLENDER FEEDER; (1) 3.5" WELEX EXTRUDER, 36:1 L/D, VENT WITH DC MOTOR AND SCREEN CHANGER, (2) 2.5" WELEX EXTRUDERS, 30:1 L/D WITH DC MOTORS, (1) 2" WELEX EXTRUDER, 24:1 L/D WITH DC MOTOR, (1) 1.25" WELEX EXTRUDER ...more
50" Ton, Jennings #E-50, extrusion preformer, 36" stroke, 14" fan die, 1,480 PSI, 2021
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Jennings
Model: E-50
Year: 2021
Used Jennings E-50 (2021) Extruder for Sale. This unit is rated at 50 ton with a 36″ stroke and a 14″ fan die size, with max pressure of 1480 PSI. It uses a Parker hydraulic pump rated at 5.1 GPM. Extruder electrical requirements are 208V / 40Amps / 60Hz / 3 Ph, and the preformer runs on 208V / 30Amps / ...more
60" Davis Standard, Co-Ex Sheet Line, 4.5" Extruder 30:1 L/D 300 HP, 3" Co-Extruder, 58" Die, 60" Roll Stack, Shear, Sheet Saws, AB PLC, 2001
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2001
60” Wide Davis Standard Co-Ex Sheet Line Lines Consists Of The Following Pieces: 4.5” Davis Standard Single Screw Extruder, 30:1 L/D, Model Thermatic III, Vented Barrel With 7.5 HP Nash Vacuum Pump, Air-Cooled Barrel, 6 Barrel Zones, 10 Die Zones, 45IN45HT Gearbox Rated To 360 HP, 17.49:1 Gearbox Ratio ...more
66" Davis Standard, coex sheet line, 4.5" & 2" extruders, 32:1 L/D ratio, 300 HP, 2000
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2000
66" Wide Sheet Line Consisting Of The Following Pieces: 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Drive(NEW IN 2016), Vented Barrel With 5.36 HP Vacuum Pump, 6 Zone Air-Cooled Barrel, 10 Die Zones, 600 AMP ...more
43" Brown, dual flywheel trim press, 12.5" opening, oper.controls, AC motor, multi-speed gearbox, belt drive to flywheels, #37688
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brown
Model: 37688
Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels.
