151 - 200 of 460 listings
JUST ADDED!
2.5" NRM #PM-III, extruder, rebuilt gearbox, new barrel, new 40 HP AC motor & drive, 4 barrel & 3 die zones, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
Model: PM-III
2.5 NRM PM III EXTRUDER, 2.5 NRM PM III EXTRUDER.
2.5" NRM #Pacemaker-III, extruder, air cooled, non-vented, 4 barrel zones, 3 downstream zones, 42" centerline, 75 HP DC, 90 HP Mentor MP drive, 500 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Model: PACEMAKER III
Used 2.5" NRM Pacemaker III Single Screw Extruder, 24:1 L/D, 75 HP DC With 1/2 HP Blower Air Cooled, Non Vented, 4 Barrel Zones, 3 Downstream Zones 42" Centerline 75 HP Baldor Reliance DC Motor, FR. MC2812ATZ 1750/2100 RPM 500 Volt, 127A Stab Shunt 90 HP Control Techniques Mentor MP DC Drive, Model MP155A4 500 VDC ...more
JUST ADDED!
2.5" NRM #Pacemaker-III, single screw extruder, 24:1 L/D, air cooled, 4 barrel zones, 50 HP AC, 16.95:1 gearbox, 41" centerline, Yaskawa VFD, 1973
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nrm
Model: PACEMAKER III
Year: 1973
Used 2.5" NRM Pacemaker III Single Screw Extruder, 24:1 L/D, 50 HP AC Air Cooled, Non Vented, 4 Barrel Zones, 3 Downstream Zones 3" x 3.25" Feed Throat 41" Centerline 50 HP Spartan Motor Driven Through A 16.95:1 Gearbox 1770 Motor RPM 460/3/60, 62A 326T Frame Yaskawa Model CIMR-F7U4030 VFD, Spec. 40301E In: 480/3/60 ...more
JUST ADDED!
2.5" NRM, extruder, 24:1 L/D, air cooled, 75 HP AC, Magnetek AC inverter
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Nrm
2.5 NRM 24:1 Extruder, 2.5 NRM 24:1 Extruder, 75 HP AC Motor with Magnetek AC Inverter. Air Cooled.
2.5" Polytruder/Egan, extruder, 24:1 L/D, 40 HP AC, air cooled, 5 barrel zones, 6 downstream zones, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polytruder
Used 2.5" Polytruder/Egan, 24:1 L/D, 40 HP AC Air Cooled, 5 Barrel Zones, 6 Downstream Zones 41" Centerline 40 HP Marathon AC Motor, 324T Frame, 1770 RPM, 460/3/60, 50A Egan Helical Gear Drive, Model H-2515, Rated For 94 HP @ 1410 RPM 14.06:1 Gear Ratio, Belt Driven ABB Inverter Drive RKC CB400 Temp Controllers ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
2-1/2" Royal cold feed extruder, 10:1 L/D, 40 HP 500 VDC motor, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royal
One (1) Used Royle 2.5" 60mm Cold Feed Rubber Extruder, Model 1A, 16:1 L/D, no motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
JUST ADDED!
2.5" Sterling, extruder, 30:1 L/D, air cooled, 5 barrel zones, 50 HP DC, Una-Dyn hot system #200, 1995
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Sterling
Model: 200
Year: 1995
2.5 Sterling 30:1 Extruder New 1995, 2.5 Sterling 30:1 Extruder, Electrically heated, air cooled, 5 Barrel zones, 50 HP DC motor with SCR, with Una-Dyn hot system Model 200.
JUST ADDED!
2.5" Welex #2.5, extruder, 24:1 L/D, new 50 HP AC motor & drive, new barrel, GP screw, 4 barrel & 4 die zones, 480 V., Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Welex
Model: 2.5
2 1/2 Welex 24:1 Extruder Model 2.5 Rebuilt, 2 1/2 Welex 24:1 Extruder Model 2.5 Rebuilt.
2.5" Welex #2.5-24:1-RHNV, single screw extruder, 24:1 L/D, 40 HP DC, air cooled barrel, 3 heating zones, hydraulic screen changer, SCR drive, 1992
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Welex
Model: 2.5 24:1 RHNV
Year: 1992
Make: Welex, Model: 2.5 24:1 RHNV, Year: 1992, Machine Location: California, Screw Diameter: 2.5″, Length-to-Diameter Ratio: 24:1, Motor Power: 40 HP DC Motor, Gearbox Ratio: 9.38:1, Barrel Cooling: Air Cooled, Heating Zones: 3, Barrel Type: Jacketed With Electrical Heaters, Screen Changer: Hydraulic ...more
JUST ADDED!
2.5" Twin Screw Compounding Line, 64mm, Maguire 6-component blender, underwater cutting system, in-line desiccant dryer
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Complete FULL Compounding Line 64mm Twin Screw, Complete FULL Compounding Line 64mm Twin Screw, 6 Multi-component Maguire Blender, 64 mm Twin Screw Extruder, under water cutting system, & In-Line Desiccant Dryer.
JUST ADDED!
2.6" Farrel #FTX-500, co-rotating twin screw extruder, 30:1 L/D, 6 barrel, 450 RPM, 150 HP, water cooled, 76" barrel L, 20-hole strand die
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Farrel
Model: FTX 500
Used 67mm Farrel FTX500 Co-Rotating Twin Screw Extruder, 150 HP 450 RPM Screw Speed 30:1 Approximate L/D Ratio Approx. 76" Barrel Length 96MM(3.78") Round Feed Throat Top Vented Approx. 56" From Feed Throat 6 Barrel Zones, 1 Die Zone Water Cooled Barrel Allen-Bradley SLC 500 PLC Solid State Relays 150 HP Siemens ...more
2.6" Gloucester #25225R2, single screw extruder, 32:1 L/D, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 25225R2
used- gloucester single screw extruder, model 25225r2. 2.5' diameter screw, 32:1 l/d. has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio 13.75:1 and is direct driven in ...more
JUST ADDED!
2.6" Jinhu, twin screw extruder, 65mm, 50 HP, ABB drive, spare distributor & reduction gearboxes, 480 V.
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Jinhu
65 mm Jinhu Twin Screw Extruder for PE, 65 mm Jinhu Twin Screw Extruder, 50HP,480 volts with a ABB drive, 1- Spare Distributor gear box, 1-Spare Reduction gearbox.
JUST ADDED!
2.6" NGR #S-GRAN-65-70-VHD, shredder/extruder recycling system, 65mm, single shaft shredder, infeed conveyor, metal detector, 125 HP, 480 V., 2016
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Ngr
Model: S-GRAN-65-70-VHD
Year: 2016
NGR S-GRAN PLASTIC SHREDDER/EXTRUDER SYSTEM NEW 2016, NGR S-GRAN PLASTIC SHREDDER/EXTRUDER SYSTEM NEW 2016, mODEL s-gran 65-70 vhd, infeed conveyor 32 wide x 25 long, metal detector, single shaft shredser, 65 mm Extruder Screw, System 125 HP, 480 Volt, Great Conditioln/Very Little Use.
2.6" Everplast #EMS-65, extrusion line, 28:1 L/D, 30 HP, air cooled, w/ melt pump & autoloader, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: EMS-65
Year: 2019
Used 65mm Everplast Extrusion Line Consisting Of The Following: 65mm Everplast EMS-65 Single Screw Extruder, 28:1 L/D, 30 HP 3 Barrel Zones, 3 Downstream Zones, Air Cooled Centerline Height: 1050mm (41.34") Screw Speed: 60 RPM 4" x 24" Everplast ETB-05 Belt Puller, 2 HP Approx. 764 LBF Pulling Force Approx. 164 FPM ...more
2.6" Xinda #SHJ-65, Twin-screw Extrusion Line, w/ Underwater Pelletizer, 65mm, 90kw, 10-60 RPM, Siemens Simatic S7-1200, 2023
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: SHJ-65
Year: 2023
Make: Xinda, Model: SHJ-65, Year: 2023, Machine Location: Upon Request, Main Extruder, Model: Xinda SHJ-65, Screw diameter: 65mm, Main drive motor: 90 kW (WEG brand), Main drive inverter: Schneider brand, Vacuum degassing: dual-port system (barrels 8 & 10), water-recycling vacuum pump (3 kW), Melt Pump, Speed: ...more
JUST ADDED!
2.8" Cincinnati #ARGOS-78-R-22, parallel twin screw extruder, 72mm, 28:1 L/D, co-rotating, EXcPRO-ZP control unit
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Cincinnati
Model: ARGOS-78-R-22
Cincinnati ARGOS 78-R-22 Parallel Twin Screw Extruder 72mm 28:1 L/D, Cincinnati ARGOS 78-R-22 Parallel Twin Screw Extruder 72mm 28:1 L/D Co-Rotating With EXcPRO-ZP Control Unit Applications: Specifically suited for PEX profile, and other thermoplastic materials.
2.8" Coperion #ZSK-70-SC, Twin Screw Extrusion Line, 800-1,000 kg/hr, Pelletizing Package, co-rotating, 70mm, 200 RPM, 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Coperion
Model: ZSK-70-SC
Year: 2009
used coperion zsk 70 sc twin screw extrusion line 800-1,000 kg/hr polymer compounding system with pelletizing package. consisting of: (1) koch technik feeding system & scholz dosiertechnik dosing unit, (1) coperion zsk 70 sc twin screw extruder 40:1 l/d (2) 70 mm diameter screws, 40:1 l/d ratio, co-rotating ...more
JUST ADDED!
2.8" ICMA San Giorgio, twin screw pelletizing line, 71mm, Gala 6 pelletizer, spare pelletizer, Beringer screen changer, Sweco classifier, 2001
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Icma San Giorgio
Year: 2001
71mm ICMA SAN GIORGIO Twin Screw Extrusion Pelletizing Line (w/GALA) New 2001, A SAN GIORGIO Twin Screw Extruder New 2001, with spare gear box and drive and the programming is included, Beringer slide plate screen changer, GALA 6 Pelletizer with spare pelletizer, Sweco Classifier, EXTRA PARTS: HEATERS, ELEMENTS, 2 SET ...more
2.8" Leistritz #LSB70, twin screw side feeder, 2011
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Model: LSB70
Year: 2011
Used 77mm Leistritz Twin Screw Side Feeder (Only), Manufacturer: Leistritz, Model: LSB70, Size: 70mm, Serial: 4080, Year: 2011, 2011 LEISTRITZ LSB70.
2.8" Werner & Pfleiderer #ZSK-70-F175E, twin screw extruder, 23:1 L/D, 6 section, 198 RPM, co-rotating compounding system, 1996
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Werner & Pfleiderer
Model: ZSK-70-F175E
Year: 1996
used- coperion werner & pfleiderer zsk 70 f175e twin screw extruder, co-rotating, (2) 70 mm diameter side by side screws, 23:1 l/d ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. driven by a 108 kw-330-volt ac drive motor via a piv gear box. screw speed maximum 198 rpm. frame ...more
2.8" Werner & Pfleiderer #ZSK70, twin screw extruder, 200 HP, water cooled barrel, 1995
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Werner & Pfleiderer
Model: ZSK70
Year: 1995
70MM Werner and Pfleiderer twin screw extruder, model ZSK70, electrically heated, water-cooled barrel, 32:1 L/d, with (1) feed section, (7) non-vented and (2) top-vented barrel sections, 200 hp AC motor, with Kreyenborg two piston continuous screen changer, model AV-050/SONDER, machine# 180881, project# 95-3211, built ...more
2.83" Jiangsu Xinda #PSHJ72, twin screw extruder, 40:1 LD ratio, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jiangsu-Lianguan
Model: PSHJ72
Year: 2007
Used 72mm Jiangsu Xinda Twin Screw Extruder, Model PSHJ72 40:1 LD Ratio, 10 Elements, Port in Zone 5, Vent In Zone 8 110 Kw Main Motor(147.5 Hp) With AC Drive 500 RPM Screw Speed Has Clampshell Style Barrel Opening 11 Temp Zone, 1 Die Zone, 1 Pressure Readout 2.2Kw Material Feeder With Control Panel New in 2007 ...more
2.95" Cincinnati Milacron #Pak-3, single screw extruder, 24:1 L/D, 60 HP AC, 5 barrel zones, air-cooled, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: PAK 3
Year: 2004
Used 75MM(3.0") Cincinnati Milacron Single Screw Extruder 24:1 L/D Ratio 60 HP Reliance RPMAC AC Motor Siemens AC Drive 5 Barrel Zones Air-Cooled Barrel 6 Die Zones 55" Centerline Currently On Raised Base With V-Grove Casters Base Can Be Unbolted For 42.5" Centerline 460/3/60, 222 FLA, 300 Amp Disconnect Bunting ...more
2.95" Krauss Maffei #KMD-75/32, Parallel Counter-Rotating Twin Screw Extruder, 32:1 L/D, 51 HP, Air-Cooled, 5 Zones, 480/3/60, 19302 hours, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Krauss Maffei
Model: KMD 75/32
Year: 2006
Used 75mm Krauss Maffei Parallel Counter Rotating Twin Screw Extruder, Model KMD 72/32, New in 2006 32:1 L/D Air Cooled Parallel Barrel, 5 Zones, Vented with Vacuum System 51hp Direct Drive Reliance AC Inverter Duty Motor, 1770 RPM, 62 Amps Allen-Bradley PowerFlex 700 Drives 9 Downstream Zones, Right to Left ...more
3" Baker Perkins #MPC/V-50, direct extrusion line, 12:1 L/D, 15 HP, 1-1/4" twin screw side feeder, 7-hole strand die, 1984
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Extruders and Extrusion Lines
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Baker Perkins
Model: MPC/V-50
Year: 1984
ITEM NO : 107120 QTY : 1 MANUFACTURER : BAKER PERKINS MODEL : MPC/V-50 SCREW DIAMETER : 75MM L/D : 12:1 HP : 15 RPM : 1750 COOLING : WATER HEAT TYPE : ELECTRIC CONTROL TYPE : DIGITAL BAKER PERKINS MODEL MPC/V-50 DIRECT EXTRUSION LINE BUILT IN 1984 INCLUDING: 75MM SINGLE SCREW EXTRUDER WITH A 36" ELECTRICAL HEATED ...more
3" Davis Standard #DS-30, Single Screw Extruder, 24:1 L/D, 40 HP DC Motor, 4 Barrel Zone, 7.42 Gearbox Ratio, 1989
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1989
Used 3" Davis Standard Single Screw Extruder, Model DS-30, 40 DC Motor 24:1 L/D Air Cooled Barrel, 4 Barrel Zone, 4 Downstream Zones 6" x 4" Feed Throat 40 HP Electric DC Motor, With 1 HP Blower Arm Amps: 67.3, Field Amps: 2.24/1.04 1150/2000 RPM Stab Shunt Wound 7.42 Gearbox Ratio, 60HP Capacity with 1.25 Service ...more
JUST ADDED!
3" Davis Standard #Super-Blue, extruder, 75mm, 24:1 L/D, air cooled, 50 HP Reliance AC, Parker 690 inverter drive, 2013
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: SUPER-BLUE
Year: 2013
75mm Davis Standard Super Blue Extruder 24:1 Air Cooled 2013, 75 mm (3) Davis Standard Super Blue) 24:1 Air Cooled Extruder New 2013, 75 mm Davis Standard Extruder, 24:1 L/D, 50 HP AC Motor, New In 2013, Belt Driven Through 17.20:1 SB-75MM Gearbox, Rated to 160 HP, Air Cooled Barrel, 4 Barrel Zones, 3 Die Zones, 50 HP ...more
3" Davis Standard #DS-30, single screw extruder, 24:1 L/D, 7.42 gearbox ratio, air cooled, 40 HP AC, 1995
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1995
Used 3" Davis Standard Single Screw Extruder, Model DS-30, New in 1995 24:1 L/D Air Cooled Barrel, 4 Barrel Zone 7.42 Gearbox Ratio, 70hp Capacity with 1.25 Service Factor 40hp Baldor Vector AC Motor, 1180-3000rpm, With AC Drive Novus Temperature Controllers, 4 Barrel Zone, 3 Die Zone Screw Speed & Motor Load ...more
3" Hartig Extruder, 4 barrel zones, 24:1 L/D ratio, 75 HP, 3.25" L x 3" width feed throat, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hartig
Year: 2019
Used 3" Hartig Extruder, 24:1, 75HP 4 Barrel Zones, 24:1 L/D Ratio Feed Throat: 3.25" L x 3" W 8 Downstream Zones Koellman Gearbox Size: PEZS 312 13.95:1 Ratio, Input RPM 1750, Output RPM 125 Rating: 93, Service Factor: 1.0 S/N: 71087348/10 75HP Marathon AC Motor, Blue Max, UVJ365THFS80366UL 460/3/60, 92A (42.5A @ ...more
3" Merritt Davis, extruder w/ 1.25" co-extruder, 24:1 L/D ratio, air cooled, 60 HP AC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Used 3" Merritt Davis Extruder with 1.25" Merritt Co-Extruder 60 HP Motor AC Motor, NEW WEG AC Drive On Primary Extruder, 24:1 L/D Ratio, Air Cooled, 4 Barrel Zones, 22:1 Gear Ratio, 1.25" Pedestal Extruder With Tilt and Swing,5 Hp Ac Motor, 23.2:1 Gear Ratio, 12 Total Die Zones For the System, Both Machines With ...more
3" Miotto #EM03/60K, extruder, 60:30 L/D, Atos Control, hopper/feeder, 40 HP, 5 zone, 2004
Inter-Plant Sales | Hugo, MN
Category: Extruders and Extrusion Lines
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Miotto
Model: EM03/60K
Year: 2004
3" NRM, Complete Plastic Bag & Film Extrusion Line, 5 Ton gantry crane
C3 Surplus LLC | Miami, FL
Category: Extruders and Extrusion Lines
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Nrm
Overview, This complete plastic bag and film extrusion line offers a turnkey solution for plastic film manufacturing operations. Centered around an NRM 3" horizontal extruder, this comprehensive system includes all essential components from material blending through final take-up. The package includes calendering ...more
3" Welex #HS-3.0-40D-SV, Single Screw Extruder, water cooled, 40:1 L/D, 1520 RPM, 550 HP VFD Drive, Vented Barrel, 480 V., 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: HS-3.0-40D-SV
Year: 2009
used welex hs 3.0 40d sv single screw extruder | 3" screw | 40:1 l/d | 1520 rpm | 550 hp vfd drive | vented barrel. 1520 rpm max. screw speed. electric heated, air cooled barrel. vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. touch screen operator control. ...more
JUST ADDED!
3.1" Cincinnati Milacron #CM80HP, conical twin screw extruder, 75 HP, 4 barrel zones, oil cooled barrel, crammer feeder, 28,475 hours, 1998, AS IS
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: CM80HP
Year: 1998
Used 80mm Cincinnati Milacron CM80HP Conical Twin Screw Extruder, 75 HP 4 Barrel Zones, 8 Downstream Zones Thermal-Oil-Cooled Barrel With Closed-Loop Oil Circulation System 43" Centerline 75 HP Powertec Brushless Main Drive Motor With Integral Encoder And Blower Pacific Scientific Brushless 3000 Main Motor Drive ...more
JUST ADDED!
3.4" Davis Standard, extruder, 24:1 L/D, non-vented, 50 HP AC motor & drive, 17.25:1 gearbox, Eurotherm controls, Rebuilt
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
3.4 Davis Std. Extruder (Recently Rebuilt), 3.4 Davis Std. Extruder (Recently Rebuilt), 50 HP AC Motor with AC Drive rated up to 100 HP, 24:1 L/D Ratio Non-Vented, Eurotherm Controllers, Screw in Good Condition, NOTE: Rebuilt and painted 2 years ago, never reconnected to power since the rebuild. Mark IV Gear Box ...more
JUST ADDED!
3.5" Berlyn, extruder, 30:1 L/D, water cooled, 100 HP DC, screen changer, gear pump
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Berlyn
3.5 Berlyn 30:1 Extruder, 3.5 Berlyn 30:1 Extruder.
JUST ADDED!
3.5" Cincinnati Milacron #APEX-3.5, side feed extruder, 30:1 L/D, 75 HP, 1999
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: APEX-3.5
Year: 1999
Introducing the 1999 3.5" Cincinnati Milacron Side Feed (MuCell) Extruder, a robust machine designed for high-performance in the plastics and rubber industry. This extruder s a 30:1 L/D ratio and is powered by a reliable 75 HP motor, ensuring efficiency and precision in your manufacturing processes. The Cincinnati ...more
3.5" Cincinnati Milacron #Apex-3.5, side feed single screw extruder, 30:1 L/D ratio, 75 HP, water-cooled barrel, GE Fanuc PLC, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: APEX 3.5
Year: 1999
Used 3.5" Cincinnati Milacron Side Feed Single Screw Extruder Model Apex 3.5 30:1 L/D Ratio, 30:1 L/D Special Screw for MuCell Material Side Port Feed Throat for MuCell Material Entry Water-Cooled Barrel Belt Driven Through Flender SZNE-250 18.17:1 Gearbox Rated To 250 HP 6 Barrel Zones, 3 Die Zones ...more
3.5" Davis Standard #3.5-PMIII, extruder, water-cooled, 24:1 L/D, 75 HP, 1780 RPM, 460/3/60, Allen Bradley drive, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5 PMIII
Year: 2000
Used 3.5" Davis Standard/NRM Model 3.5 PMIII Extruder, Water-Cooled, 24:1 L/D, 75 HP Water Cooled Barrel, 4 Barrel Zones, 4 Downstream Zones 75 HP Marathon AC Motor, 365T Frame 1780 RPM 460/3/60, 93A TEFC Enclosure Allen Bradley Drive Eurotherm 2208e Temp Controllers, West 6100+ Limit Controllers Indicator Lights For ...more
3.5" Davis Standard #3.5-PMIII, extruder, water-cooled, 24:1 L/D, 100 HP, 17.39:1 gearbox, AB 1336 VFD, 460/3/60, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5 PMIII
Year: 2007
Used 3.5" Davis Standard/NRM Model 3.5 PMIII Extruder, 24:1 L/D, 100 HP Water Cooled Barrel, 7 Barrel Zones, 4 Downstream Zones Screw Speed Approx: 102 RPM Centerline Height: 42.5" +/- 2" 100 HP Marathon AC Motor, 405T Frame 1785 RPM 460/3/60, 115A TEFC Enclosure, IP43 17.39:1 Davis Standard Gearbox Rated For 257 HP ...more
JUST ADDED!
3.5" Davis Standard #3.5MV350, extruder, 24:1 L/D, air cooled, 4 barrel zones, 75 HP DC, 17.4:1 gearbox, 42" centerline, Flexpak 3000 drive, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5MV350
Year: 2000
Used 3.5" Davis Standard 3.5MV350 Extruder, 24:1 L/D, 75 HP DC Air Cooled, 4 Barrel Zones, 4 Downstream Zones 7.5" x 4.5" Water-Cooled Feed Throat 42" Centerline 75 HP Reliance Electric DC Motor Driven Through A 17.4:1 Gearbox That Is Rated For 158 HP Max 1750/2100 RPM 500V, 124A Str. Shunt, Forced Vent, DP Flexpak ...more
JUST ADDED!
3.5" NRM/Davis-Standard #3.5PM-IV, single screw extruder, 24:1 L/D, air cooled barrel, 75 HP DC motor, 15.12:1 gearbox, 42" centerline, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5PM IV
Year: 1997
Used 3.5" NRM/Davis-Standard PM IV Single Screw Extruder, 24:1 L/D, 75 HP Air-Cooled Barrel 4 Barrel Zones, 3 Downstream Zones 7" x 3.5" Water-Cooled Feed Throat 42" Centerline Height Approx. 73 Screw RPM @ 1750 Motor RPM 75 HP Reliance Electric DC Motor, With Blower 1750/2100 RPM 500 VDC, 124 Armature Amps Reliance ...more
3.5" Davis Standard, extruder, water cooled, 75 HP
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 350H III
Used 3.5" Davis Standard Extruder, Water Cooled, 75HP, Serial #F-8613.
JUST ADDED!
3.5" Davis Standard #35IN35, extruder, 24:1 L/D, 50 HP AC motor & drive, air cooled, 5 barrel & 3 die zones, 1995, Refurbished
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 35IN35
Year: 1995
3.5 Davis Std. 24:1 Extruder Model 35IN35, 3.5 Davis Std. 24:1 Extruder Model 35IN35 New in 1995 but Refurbished since and not been used since, 50 HP AC motor and Drive, Air Cooled, 5 Barrel Zones 3 Die Zones.
JUST ADDED!
3.5" Davis Standard #35IN35, water ring pelletizing line, 34:1 L/D, vented, 125 HP Baldor AC, Xaloy WRP-12i pelletizer, screen changer, 2008
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 35IN35
Year: 2008
Davis Standard/Xaloy 3.5 Pelletizing Line, 125 HP 2008, Davis Standard/Xaloy 3.5 Pelletizing Line, 125 HP 2008, Model: 35IN35 / 3.5in, 3.5 Davis Standard Thermatic Single Screw Extruder, 34:1 L/D Vented Barrel, Vent Located 78 from Feed Throat, 6 Water Cooled Barrel Zones, Oversized 14 x 10 Feed Throat, Water Cooled ...more
3-1/2" Davis Standard #35IN35, Extruder, 24:1 L/D, air cooled, (5) zones, 50 HP, Dura Drive, 17.34:1 gearbox, 1995
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 35IN35
Year: 1995
Used Davis Standard 35IN35 (1995) Extruder for Sale. This single screw extruder has a 3.5″ screw with a 24:1 L/D ratio and is air cooled across five cooling zones. Drive is a 50 HP motor with Dura Drive control, running through a gearbox with a 17.34:1 ratio rated for 150 HP capacity. A hopper is included. It is ...more
JUST ADDED!
3.5" Davis Standard #35IN35-MV, Single Screw Extruder, 24:1 L/D, non-vented, air cooled, 4 zones, 100 HP, 17.39:1 gearbox, 575 Volts, 3PH, 2003
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 35IN35-MV
Year: 2003
Used Davis Standard 35IN35-MV (2003) Extruder for Sale. This single screw extruder has a 3.5″ screw with a 24:1 L/D ratio, non-vented and air cooled, with (4) barrel zones controlled by digital touch pad temperature controls. Drive is rated at 100 HP through a 17.39:1 gearbox with a 158 HP gearbox capacity, and ...more
JUST ADDED!
3.5" Davis Standard #35IN35-MV, Single Screw Extruder, 24:1 L/D, 100 HP, air cooled, 4 zones, non-vented, 17.39:1 gear ratio, Maguire multi-compartment loader, 575 V., 2003
Trader Machinery Inc | Concord, ON
Category: Extruders and Extrusion Lines
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Davis Standard
Model: 35IN35-MV
Year: 2003
3.5"24:14100 HP17.39:1158575 V / 3 PHASE.
JUST ADDED!
3.5" Davis Standard #35IN35DSRE, rubber extruder, 20:1 L/D, 257 HP, 17.39:1 gearbox, 408,300 lb. dynamic thrust, 18,000 lb., 2006
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Davis Standard
Model: 35IN35DSRE
Year: 2006
3.5 Davis Std. Rubber Extruder New 2006, 3.5 Davis Std. Rubber Extruder New 2006, Model 35IN35DSRE, 20:1 L/D Ratio, Gearbox Ratio: 17.39.1, 257 HP, DIMENSIONS: 66W x 120 L x 78 High, Dyn. Thrust Cap. 408,300 lb., Dyn Thrust Cap. 185,204 KG, Liters: 6, WEIGHT: 18,000 lbs.



















































