1 / 8
Click to zoom in
1 / 8
For Sale by Aaron Equipment Co
Surplus Record Dealer Since 2024
Location: Schaumburg, IL
Contact Ken Matuszak
Phone Number: 708...> Show Phone Number 708-412-6077
Let the seller know you found their listing on Surplus Record!
Description
used- gloucester single screw extruder, model 25225r2. 2.5' diameter screw, 32:1 l/d. has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 hp baldor d/c motor with saftronics scr control. one (1) hp pump with heat exchanger on the gearbox. originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. all wiring on the extruder is run to a terminal strip. new control panel has fourteen (14) zones of temperature controls. drive control is supplied loose. includes two (2) new / rebuilt screws. 460/3/60. serial# 36736/25.
Get Your Price from Aaron Equipment Co!
Buyers Who Viewed This Listing Also Viewed:
2.5" Gloucester Engineering #25225R2, extruder, 32:1, electrically heated, air cooled, non-vented barrel
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Model: 25225R2
Year: 2011
Used Gloucester Engineering Extruder 2.5", 32:1. Electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor ...more
JUST ADDED!
2.6" Farrel #FTX-500, co-rotating twin screw extruder, 30:1 L/D, 6 barrel, 450 RPM, 150 HP, water cooled, 76" barrel L, 20-hole strand die
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Farrel
Model: FTX 500
Used 67mm Farrel FTX500 Co-Rotating Twin Screw Extruder, 150 HP 450 RPM Screw Speed 30:1 Approximate L/D Ratio Approx. 76" Barrel Length 96MM(3.78") Round Feed Throat Top Vented Approx. 56" From Feed Throat 6 Barrel Zones, 1 Die Zone Water Cooled Barrel Allen-Bradley SLC 500 PLC Solid State Relays 150 HP Siemens ...more
JUST ADDED!
2.6" Jinhu, twin screw extruder, 65mm, 50 HP, ABB drive, spare distributor & reduction gearboxes, 480 V.
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Jinhu
65 mm Jinhu Twin Screw Extruder for PE, 65 mm Jinhu Twin Screw Extruder, 50HP,480 volts with a ABB drive, 1- Spare Distributor gear box, 1-Spare Reduction gearbox.
2.6" Xinda #SHJ-65, Twin-screw Extrusion Line, w/ Underwater Pelletizer, 65mm, 90kw, 10-60 RPM, Siemens Simatic S7-1200, 2023
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: SHJ-65
Year: 2023
Make: Xinda, Model: SHJ-65, Year: 2023, Machine Location: Upon Request, Main Extruder, Model: Xinda SHJ-65, Screw diameter: 65mm, Main drive motor: 90 kW (WEG brand), Main drive inverter: Schneider brand, Vacuum degassing: dual-port system (barrels 8 & 10), water-recycling vacuum pump (3 kW), Melt Pump, Speed: ...more
JUST ADDED!
2.6" NGR #S-GRAN-65-70-VHD, shredder/extruder recycling system, 65mm, single shaft shredder, infeed conveyor, metal detector, 125 HP, 480 V., 2016
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Ngr
Model: S-GRAN-65-70-VHD
Year: 2016
NGR S-GRAN PLASTIC SHREDDER/EXTRUDER SYSTEM NEW 2016, NGR S-GRAN PLASTIC SHREDDER/EXTRUDER SYSTEM NEW 2016, mODEL s-gran 65-70 vhd, infeed conveyor 32 wide x 25 long, metal detector, single shaft shredser, 65 mm Extruder Screw, System 125 HP, 480 Volt, Great Conditioln/Very Little Use.
