26 Results
0.7" Leistritz #Micro-18-GG/30D, twin screw extruder, 30:1 L/D, 6 section, 500 RPM, water cooled, 1997
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MICRO-18-GG/30D
Year: 1997
Used 18 mm Leistritz twin screw extruder, model Micro18GG/30D, 18 mm screws, counter rotating screws, 30:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.4 kw, 280 volt, 3,200 rpm dc motor, (6) barrel sections with (1) feed, (1) vent and plugged, (4) non-vented barrel sections, on board control ...more
0.7" Leistritz #ZSE-18-PH-40D, twin screw pharma extruder system, 40:1 L/D, 600 RPM, 6.3 HP, w/ K-Tron feeders, on wheels, 2005
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-18-PH-40D
Year: 2005
used leistritz zse 18 ph-40d twin screw extruder system pharma lab scale line with k-tron feeder & pelletizer. (2) co-rotating 18 mm diameter side by side screws, 40:1 l/d ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. driven by a 4.7 kw (6.3hp) -400/230-volt ac drive motor ...more
JUST ADDED!
0.71" Leistritz #ZSE18HPe-PH-40D, Twin Screw Co-Rotating Extrusion Line, 40:1 L/D, 1200 RPM, 9.4 kW, Thermo Pharma 16 pelletizer, 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE18HPE-PH-40D
Year: 2009
used leistritz twin screw co-rotating extrusion line consisting of: (1) leistritz type zse18hpe-ph-40d extruder, (2) 18 mm screws, approximately 40 to 1 l/d ratio, 1200 rpm maximum screw rotation, 8 zones electrically heated, water cooled, 9.4 kw drive, machine # 3878, built 2009. (1) thermo scientific pharma 16 ...more
1.05" Leistritz #ZSE-27-MAXX/48D, Twin Screw Extruder System, 1200 RPM, 12 barrel, corotating
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-27-MAXX/48D
used leistritz zse 27 maxx/48d twin screw extruder system with feeders and vacuum package. (2) 1.05" (27 mm) diameter screws. 48:1 l/d ratio. co-rotating. 12-barrel housing section electrically heated, water cooled. (2) degassing port. maximum screw speed 1200 rpm. via a gearbox, incl. (2) leistriz twin screw side ...more
1.1" Leistritz #ZSE-27-HP-PH-40D, twin screw pharma extruder system, 40:1 L/D, 10 barrel, 500 RPM, w/ barrel lift, 2007
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-27-HP-PH-40D
Year: 2007
used leistritz zse 27 hp-ph-40d twin screw extruder pharmaceutical grade 27mm co-rotating extruder system. capacity 200 kgs/hr (440 lbs/hr.). co-rotating, (2) 27 mm diameter side by side screws, 40:1 l/d ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. hastelloy c-276. driven by a ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
1.1" Leistritz #ZSE-27-HP-PH-40D, twin screw pharma extruder system, 40:1 L/D, 10 barrel, 500 RPM, 22.5 HP, w/ K-Tron feeders, 2010
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-27-HP-PH-40D
Year: 2010
used leistritz zse 27 hp-ph-40d twin screw extruder system complete pharma line with chiller & granulator (2010). capacity 200 kgs/hr (440 lbs/hr.). co-rotating, (2) 27 mm diameter side by side screws, 40:1 l/d ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. hastelloy c-276. driven ...more
1.1" Leistritz #ZSE-27-HP-PH-40D, twin screw pharma extruder system, 40:1 L/D, 10 barrel, 500 RPM, w/ K-Tron feeders, 2008
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-27-HP-PH-40D
Year: 2008
used leistritz zse 27 hp-ph-40d twin screw extruder system pharma grade with k-tron feeders & full package. capacity 200 kgs/hr (440 lbs/hr.). co-rotating, (2) 27 mm diameter side by side screws, 40:1 l/d ratio, 10-barrel sections, (9) heated barrels, electrically heated water cooled. hastelloy c-276. driven by a ...more
JUST ADDED!
1.1" Leistritz, twin screw extruder, 27mm, 36:1 L/D, co-rotating, 15.75 HP, 500 RPM, 2006
Plastic Machinery Of New York Inc | Yaphank, NY
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Leistritz
Year: 2006
27mm Leistritch C0-Rotating Extruder (can be counter rotating) New 2006, Leistritch Twin Screw Extruder 27mm 36:1 Co-Rotating -New 2006 8 barrel housing section electrically heated, water cooled (1) Degassing port. Max Screw speed 500 RPM. Gearbox is direct driven via a 15.75 HP/10.5 kW, 1450/1740 RPM A/C motor, free ...more
1.2" Leistritz, counter rotating twin screw extruder, 42:1 L/D, electric heated, air cooled, 1987
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Year: 1987
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled and includes operator control panel., 1987 LEISTRITZ 30mm.
2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE 50 GG
Year: 1997
55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more
2.36" Leistritz #ZSE-60-GL, Twin Screw Extruder, liquid cooled, 36:1 L/D, 150 HP, 9 zones, Side Stuffer, extra parts
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-GL
used leistritz zse-60 gl twin screw extruder 36:1 l/d, 150 hp, side stuffer, strand dies, screws & spares. with (9) modular barrel sections. 114 kw / 150 hp baumueller dc motor, 500 rpm max. screw speed, barrels are electrically heated and internally cored for liquid cooling. includes stand-alone electrical ...more
2.36" Leistritz #ZSE-60-GL-36D, Twin-Screw Pelletizing Extrusion Line, 9 barrel segments, 8-hopper blender, 250 HP, 2000 RPM, 2001
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Leistritz
Model: ZSE-60-GL-36D
Year: 2001
Used Leistritz 250 HP Twin Screw Pelletizing Line, 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 250 HP 1750/2000 RPM with Bath, 8 Hopper Blender, Stainless Steel Holding Tank, Air Systems, Pelletizer, Air knife, Witte classifier, Panel, Co-Rotating, 9 Barrel Segments, With 4* SCHEER BAY PELLETIZER MDL. SGS-100E ...more
2.36" Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, 121 KW Baumuller Shunt Wound DC motor, 10 zone Control panel w/ Eurotherm 2208 temperature ctrlrs
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE-60-GL-36D
Used 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 121KW(162 HP) Co-Rotating 500 RPM Screw, 36:1 L/D Ratio, 9 Barrel Segments, With 40 MM Side Feeder Vent In Zone 4, Side Feeder In Zone 5 10 Zone Control Panel With Eurotherm 2208 Temperature Controllers 121KW(162) HP Baumuller Shunt Wound DC Motor Allen Bradley DC ...more
2.4" Leistritz #ZSE-60-MAX, Co-Rotating twin screw extruder, 62" L, 400 RPM, 20:1 L/D, liquid cooled, Sinamics Control, w/ wheels & adj feet, 480 V., 3 phase
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAX
used-leistritz 60mm zse 60 maxx twin screw extruder, type zse60maxx-20d. (2) co-rotating screws approximately 2.44" diameter x 62" long, 20:1 l/d ratio, and 400 rpm screw speed. extruder s (4) barrel sections plus (1) feed section with liquid heating and cooling and (4) cooling zones. screws are driven through a ...more
2.4" Leistritz #ZSE-60-MAXX-36D, Twin Screw Extrusion Line, co-rotating, 60mm, Pelletizing System, 1200 RPM, 742 HP, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-36D
Year: 2014
used leistritz zse 60 maxx-36d twin screw extrusion line with pelletizing system 495 kw drive auction asset. line consists of (1) koch technik feeding system & scholz dosiertechnik dosing unit, (1) leistritz twin screw extruder, type zse 60 maxx-36d. (2) 60 mm) diameter screws. 36:1 l/d ratio. co-rotating. ...more
2.4" Leistritz #ZSE-60-MAXX-44D, Twin Screw Extruder, 60 mm, 1200 RPM, 10 barrel, Co-Rotating, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-44D
Year: 2018
used- leistritz twin screw extruder, type zse 60 maxx-44d. (2) 60 mm) diameter screws. 44:1 l/d ratio. co-rotating. 10-barrel housing section electrically heated, water cooled. (2) degassing port. maximum screw speed 1200 rpm via a flender gearbox is direct driven via a 400volt/50cycle/3ph motor. incl. control panel. ...more
2.8" Leistritz #LSB70, twin screw side feeder, 2011
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Model: LSB70
Year: 2011
Used 77mm Leistritz Twin Screw Side Feeder (Only), Manufacturer: Leistritz, Model: LSB70, Size: 70mm, Serial: 4080, Year: 2011, 2011 LEISTRITZ LSB70.
3.6" Leistritz, side feeder, 4 HP, 11" L x 6" width feed section, 39.75" centerline
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Used 92MM Leistritz Side Feeder 11" L x 6" W Feed Section 3 KW(4HP) AC Motor With AC Tech Inverter Drive 39.75" Centerline(Base Will Accept Adjusting Screws, Not Included) Approximate Dimensions: 50" L x 22" W x 60" H.
3.93" Leistritz #ZSE-100-GLAAX, co-rotating screw extruder, 442 HP, 1600 RPM DC motor w/SCR Control, 2002
Perry Videx LLC | Hainesport, NJ
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Leistritz
Model: ZSE-100-GLAAX
Year: 2002
Used Leistritz 100mm 44/1 L/D Co-Rotating Twin Screw Extruder. Model #ZSE100 GL/44D, serial #3092, new 2002. Has electrically heated water cooled vented barrel, missing water cooling system. Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft ...more
3.94" Leistritz #ZSE100GL/44D, co-rotating twin screw extruder, 442 HP DC motor, Eurotherm temperature controllers, 2002
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE100GL/44D
Year: 2002
Used 100mm Leistritz Co-Rotating Twin Screw Extruder, Model ZSE100-GL/44D, 442hp, New in 2002 442hp Direct Drive DC Motor, 1600 RPM with DC Drive Electrically Heated Water Cooled Vented Barrel Model ZSE100-GLAAX Gearbox, 5000 Newton Meters per Shaft Torque Capability 300 rpm Screw Speed Twin Screw Side Feeder Strand ...more
4" Leistritz #ZSE-100-GLAAX, co-rotating twin screw extruder, 1600 RPM, 442 HP, electric heat, water cooled, 7,515.6 hours, 2002
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-100-GLAAX
Year: 2002
used leistritz zse 100 glaax 100mm co-rotating twin screw extruder, 44/1 l/d. driven by 330 kw (442 hp), 1600 rpm dc motor with scr control. has 300 rpm screw speed, rated at 5000 newton meters per shaft torque capability and electrically heated water cooled vented barrel. has twin screw side feeder. has 7515.6 hours ...more
JUST ADDED!
Leistritz #LSM-30/34, Extruder System, 13 KW, 240 Volts, 1986
Myers Demolition & Excavation | Monaca, PA
Category: Extruders and Extrusion Lines
Seller: Myers Demolition & Excavation
Location: Beaver, PA
Mfr: Leistritz
Model: LSM-30/34
Year: 1986
$12,900 OBO Year: 1986 Model: LSM 30/34 Buyer is responsible for disconnection, rigging, loading and removal. Ground floor access with garage door opening.
JUST ADDED!
Leistritz #LSM 30/34, Laboratory Extruder, Acrison feeder, 1983
Myers Demolition & Excavation | Monaca, PA
Category: Extruders and Extrusion Lines
Seller: Myers Demolition & Excavation
Location: Beaver, PA
Mfr: Leistritz
Model: LSM-30/34
Year: 1983
$14,000 OBO Year: 1983 Model: LSM 30/34 Buyer is responsible for disconnection, rigging, loading and removal. Ground floor access with garage door opening.
Leistritz #Micro18-GGL, Pelletizing Line, 0.7" screws, counter rotating, 40:1 L/D, 8 section, water cooled, w/ SCR Control, die & rod
Federal Equipment Company | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Leistritz
Model: MICRO18-GGL
Used-Leistritz Twin Screw Extruder, Model Micro-18-GGL. 18mm, counter-rotating screws, 40:1 l/d, 500 rpm screw speed. Electrically heated, water cooled barrel with a 2.3 kw, 210/260 volt dc motor. SCR controller, (8) barrel sections with (1) jacketed feed (1) vented, (1) vented and plugged, (5) non-vented barrel ...more
Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, vented, water cooled, 250 HP, Scheer Bay SGS-100E pelletizer, 2001
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Leistritz
Model: ZSE 60 GL-36D
Year: 2001
Used Leistritz ZSE 60 GL-36D (2001) Extruder for Sale. This twin screw extruder has a 36:1 L/D ratio, is vented and water cooled, and is driven by a 250 HP Reliance DC motor. The line includes a Scheer Bay pelletizer, Model SGS-100E, and is an (8) component hopper blender (condition unknown), air system, stainless ...more
Leistritz #ZSE27-MAXX-40D, Lab Sheet Line, 29.8 kW, 1200 RPM, 320 hours, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE 27 MAXX-40D
Year: 2018
used-leistritz lab sheet line, includes the following- leistritz extruder, model zse27 maxx-40d. 29.8 kw main drive, 1200 rpm screw speed. 320 hours. (4) schenck feeders. (2) aec chilling units. (1) sterlco unit. (1) water trough. calendaring web handling stack system (roll stack os2):web alignment (pull roll 2 nip ...more
