1 / 10
Click to zoom in
1 / 10
For Sale by Plastic Machinery Of New York Inc
Surplus Record Dealer Since 2026
Location: Yaphank, NY
Contact Jeanine Jodice
Phone Number: 316...> Show Phone Number 316-317-9731
Let the seller know you found their listing on Surplus Record!
Description
10/165mm Davis Standard Dual Dia. Pelletizing Line
DESCRIPTION
DAVIS STANDARD DUAL DIAMETER VENTED EXTRUDER 10/165 mm NEW 1990
FEEDING SECTION:
FROM 10 INCHES DIAMETER DOWN TO 165 MM DIAMETER (CONICAL) GROOVED TYPE
GEAR BOX MODEL 165-1000 HP 500 OR KW 372, SAFETY FACTOR 1.32
GEAR RATIO 28:1 DYNAMIC THRUST 1035000 LBS
EXTRUDER RPM 62
DC MOTOR RELIANCE
RATING 500 HP
ARMATURE VOLTAGE 500 VDC ARMATURE AMPS 791 ADC
SHUNT VOLTAGE300 VDC SHUNT AMPS 6.07/4.22 ADC
FRAME 8508ATZ, DPFC SPEED 1750/2000 RPM
DIRECT DRIVRE TO THE GEAR BOX
BARREL 165 MM DIAMETER (VENTED)
L/D 35/1
BI-METALLIC
SCREW (TWO SECTION)
FIRST PIECE 10.00 INCHES DIAMETER GOING CONICAL
SECOND PIECE 165 MM DIAMETER DOUBLE STAGE
SCREEN CHANGER (BERINGER) 8 1/4
SLIDE TYPE WITH HYDRAULIC PISTON
SLIDE WITH TWO BREAKERS 8,250 INCHES DIAMETER
HYDRAULIC POWER UNIT 2500 PSI WITH ACCUMULATOR BERRINGER MOTOR 5 HP 6 PH 60 HZ
DC DRIVE MODEL DC6-800-4
INPUT 480 VOLT, 3 PHASE 50/60 HZ 656 AMPS OUTPUT 0-500 VDC, 800 AMPS, 500 HP
DC DRIVE
HEATERS (8 ZONES) CERAMIC TYPE
PELLETIZER PRT ITALY
NOTE; COMES WITH SPARE NEW SCREW * BARREL
COMES WITH SPARE 500 HP DC MOTOR (REBUILT 2 YEARS AGO)
NOTE: ALL NEW ELECTRICS NEW
NOTE: COMPANY WAS PROCESSING LDPE FILM (2000 POUNDS/PER/HOUR)
DESCRIPTION
DAVIS STANDARD DUAL DIAMETER VENTED EXTRUDER 10/165 mm NEW 1990
FEEDING SECTION:
FROM 10 INCHES DIAMETER DOWN TO 165 MM DIAMETER (CONICAL) GROOVED TYPE
GEAR BOX MODEL 165-1000 HP 500 OR KW 372, SAFETY FACTOR 1.32
GEAR RATIO 28:1 DYNAMIC THRUST 1035000 LBS
EXTRUDER RPM 62
DC MOTOR RELIANCE
RATING 500 HP
ARMATURE VOLTAGE 500 VDC ARMATURE AMPS 791 ADC
SHUNT VOLTAGE300 VDC SHUNT AMPS 6.07/4.22 ADC
FRAME 8508ATZ, DPFC SPEED 1750/2000 RPM
DIRECT DRIVRE TO THE GEAR BOX
BARREL 165 MM DIAMETER (VENTED)
L/D 35/1
BI-METALLIC
SCREW (TWO SECTION)
FIRST PIECE 10.00 INCHES DIAMETER GOING CONICAL
SECOND PIECE 165 MM DIAMETER DOUBLE STAGE
SCREEN CHANGER (BERINGER) 8 1/4
SLIDE TYPE WITH HYDRAULIC PISTON
SLIDE WITH TWO BREAKERS 8,250 INCHES DIAMETER
HYDRAULIC POWER UNIT 2500 PSI WITH ACCUMULATOR BERRINGER MOTOR 5 HP 6 PH 60 HZ
DC DRIVE MODEL DC6-800-4
INPUT 480 VOLT, 3 PHASE 50/60 HZ 656 AMPS OUTPUT 0-500 VDC, 800 AMPS, 500 HP
DC DRIVE
HEATERS (8 ZONES) CERAMIC TYPE
PELLETIZER PRT ITALY
NOTE; COMES WITH SPARE NEW SCREW * BARREL
COMES WITH SPARE 500 HP DC MOTOR (REBUILT 2 YEARS AGO)
NOTE: ALL NEW ELECTRICS NEW
NOTE: COMPANY WAS PROCESSING LDPE FILM (2000 POUNDS/PER/HOUR)
Get Your Price from Plastic Machinery Of New York Inc!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
10"/6" AET, dual diameter film reclaim extruder, 32:1 L/D, vented, 400 HP AC, Yaskawa drive, Koellmann gear reducer, Xaloy EH80 8" screen changer
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Aet
AET 10/6 Dual Diamter Extruder, AET dual diameter 10-6 32:1 L/D 50 centerline height film reclaim extruder with Koellmann gear double reduction gear reducer, with oil pump, heat exchanger cooling system, cast water cooled feed throat with grooved hardened horizontal liner, 4140 SAE barrel with bimetallic liner, vented ...more
10" Davis Standard #100TH100D, single screw extruder, 38:1 L/D ratio, water cooled, 44" centerline, w/ direct dr gearbox, cooling, Trendelkamp screen changer, 1991
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 100TH100D
Year: 1991
used- davis standard 10" extruder, model 100th100d. 38:1 l/d ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 gearbox reduction ratio; rated at 1800 hp at a service factor of 1.5; gearbox currently set to be dual direct driven in back of the gearbox. last ...more
10" AET, dual diameter extruder, 32" 1 L/D, vented barrel, 2014
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aet
Year: 2014
Used 10" To 6" AET Dual Diameter Extruder 32:1 L/D, Vented Barrel, 4140 SAE Barrel Bimetallic Liner, 10" Diameter Is 7:1 13.91 Koellmann UNEX 8.12 Gearbox, Rated To 500 HP 10 Barrel Zones, 6 Downstream Zones 400 HP AC Motor With Yaskawa Inverter Drive Xaloy EH80 Slide Plate Screen Changer With Hydraulic Powerpack ...more
9.84" Krauss Maffei #KE250x30D, Single Screw Extruder, side vented, water cooled, 30:1 L/D, 200 KW, 1534 RPM, 480 Volt, 3PH, 2020
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Krauss Maffei
Model: KE250X30D
Year: 2020
Used Krauss Maffei KE250x30D (2020) Extruder for Sale. This single screw extruder has a 250 mm (9.84″) screw with a 30:1 L/D ratio and is side vented and water cooled. Drive is rated 200 kW / 268 HP at 1534 RPM, with a power requirement of 480v – 3 Ph (348 Amps). The machine was used for R & D ...more
11" Gloucester #GEC, Mini-Separator, 480 V., 3-Ph., Blown Film Downstream, #47652
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gloucester
Model: GEC
Used 12" Gloucester Mini separator, 480V, 3 phase.
