go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

4.33" Useon(Nanjing) #SAT110, co-rotating twin screw extruder, 32:1 L/D, air-cooled barrel, 2019

Manufacturer: Nanjing
Model: SAT110
Year: 2019
Dia.of Screw: 4.33
Stock # 20572A

For Sale by Arlington Machinery

Surplus Record Dealer Since 1998
Platinum Level Dealer
Location: Lake Zurich, IL
Contact Chris / Garrett
Let the seller know you found their listing on Surplus Record!

Description

Description
  • 108MM Useon(Nanjing) Co-Rotating Twin Screw Extruder, Model SAT110
  • 32:1 L/D, Air-Cooled Barrel, 200 RPM Screw Speed
  • 400 HP AC Motor - 900 RPM
  • Schneider Electric AC Inverter Drive
  • 460/3/60
  • Top Vented
  • Touch Screen Controls, New In 2019
  • Includes Spare Screws
  • Rated For Up To 2,600 LBS/HR Of PET FLAKE
  • S/N: 190605
  • UNIT NO LONGER INSTALLED, NOW LOCATED IN ARLINGTON WAREHOUSE
  • Main Motor & Drive Tested At Arlington
  • PLC & HMI Tested At Arlington
  • Heaters And Cooling Fans Tested At Arlington
  • Approximate Dimensions: 24' Lx 6' W x 7' H
  • Approximate Weight 16,000 LBS

Get Your Price from Arlington Machinery!

Buyers Who Viewed This Listing Also Viewed:

4.5" NRM #PACEMAKER-III, Single Screw Extruder, 34:1 L/D, 12' vented barrel, 8" feed throat, 200 HP DC motor, 500 V., SCR controls, 1982, AS IS

Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nrm
Model: PACEMAKER-III
Year: 1982
used nrm pacemaker iii 4.5" single-screw extruder with 34:1 l/d ratio. unit s a 12' long vented barrel with electric heating and water cooling, along with an 8" round feed throat. screw is driven by a 200 hp, 500 vdc electric motor. barrel includes a 5.5" side vent located approximately 6.5' from the feed ...more

3.9" Erema #1310T, recycling line, 100mm, 1,200 lb/hr PP, 328 KW, water bath, new screw 2019, 480 V., 2007

Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Erema
Model: 1310T
Year: 2007
EREMA Model 1310T Recycling Line New 2007, EREMA 100 mm Model 1310T Recycling Line New 2007, Capacity 580 Kg/hour, 328 Kw, Electrics: 480-3-60, 503 AMPS, Rated power/current: 328 Kw, Water bath included, Rated at 1200 pounds per hour PP (580 Kg./h), This unit can be seen under power in plant in USA, NOTES: In 2019 New ...more

4.4" ICMA San Giorgio #MCM-112-40D, Twin Screw Sheet Extrusion Line, 40:1 L/D, 600-700 kg/hr., raw material mixer, 3-roll calender, 410 Volt, 2011

Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Icma San Giorgio
Model: MCM 112-40D
Year: 2011
Machine location: Mexico (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located., Full listing with all photos: meadoworks.com (Meadoworks item #6887), CAPACITY 600-700 kg/h SCREW DIAMETER 112mm L/D 40 SINGLE OR TWIN ...more

4.5" NRM, Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP GE motor, 1150 RPM, 500 VDC, power feed roll, adjustable scraper blade

Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6077 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.

4.5" Sterling, Single Screw Extruder, 30:1 L/D, air cooled vented barrel, 6 zones, 200 HP DC motor, Control Techniques Mentor II drive

Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Sterling
Used Sterling 4.5″ Single Screw Extruder for Sale. This extruder has a 4.5″ screw with a 30:1 L/D ratio, an air cooled, vented barrel with six barrel zones, and is driven by a 200 HP DC motor through a Control Techniques Mentor II drive. Temperature control is handled by a ten zone control panel using Cal ...more

Share