For Sale by Perry Videx LLC

Surplus Record Dealer Since 2021
Location: Hainesport, NJ
Contact Kathy Kelly
Phone Number: 609...> Show Phone Number 609-267-1600
Let the seller know you found their listing on Surplus Record!
Description
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-121, continuous style screen changer with Hyd. pump, 42" air cooled centerline barrel height and temperature control panel but without temperature controllers. Driven by 150 hp DC motor with SCR control.
DAVIS STANDARD 4.5"
DAVIS STANDARD 4.5"
Get Your Price from Perry Videx LLC!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
4.5" NRM #PACEMAKER-III, Single Screw Extruder, 34:1 L/D, 12' vented barrel, 8" feed throat, 200 HP DC motor, 500 V., SCR controls, 1982, AS IS
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Nrm
Model: PACEMAKER-III
Year: 1982
used nrm pacemaker iii 4.5" single-screw extruder with 34:1 l/d ratio. unit s a 12' long vented barrel with electric heating and water cooling, along with an 8" round feed throat. screw is driven by a 200 hp, 500 vdc electric motor. barrel includes a 5.5" side vent located approximately 6.5' from the feed ...more
JUST ADDED!
4.5" AET #45AS32, strand pelletizing extrusion line, 32:1 L/D, side vented, water cooled, 250 HP Marathon, Xaloy EH-60 screen changer, 480 V., 2004
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Aet
Model: 45AS32
Year: 2004
AET 4.5 32:1 Pelletizing Line, AET Model 45AS32 4.5 32:1 L/D Extruder having a six (6) zone electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42 centerline height. The gearbox is direct driven out the back end by a 250 HP Marathon Blue Max motor with inverter. The gearbox has a shaft ...more
4.5" NRM, Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, 75 HP GE motor, 1150 RPM, 500 VDC, power feed roll, adjustable scraper blade
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Item 6077 - One (1) Used NRM 4.5" 120mm Cold Feed Rubber Extruder, 12:1 L/D, 25.14:1 G/B ratio, GE 75 HP, 1150 RPM, 500 VDC motor, PFR power feed roll external bearings and adjustable scraper blade.
4.5" Sterling, Single Screw Extruder, 30:1 L/D, air cooled vented barrel, 6 zones, 200 HP DC motor, Control Techniques Mentor II drive
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Sterling
Used Sterling 4.5″ Single Screw Extruder for Sale. This extruder has a 4.5″ screw with a 30:1 L/D ratio, an air cooled, vented barrel with six barrel zones, and is driven by a 200 HP DC motor through a Control Techniques Mentor II drive. Temperature control is handled by a ten zone control panel using Cal ...more
4.5" Davis Standard #SB450, super blue single screw extruder, 24:1 L/D, air cooled, 5 barrel zones, 200 HP, 6" Nordson screen changer, 2007
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB450
Year: 2007
Used 4.5" Davis Standard Super Blue Extruder, Model SB450, New in 2007 5 Zone Air Cooled 24:1 L/D Barrel 200hp, 1760rpm Reliance AC Inverter Duty Motor & Yaskawa CIMR-F7U4110 AC Inverter Drive 17.39 Gearbox Ratio, 400hp Rating With 1.5 Service Factor Control Panel with Eurotherm 3208 Temperature Controllers, 12 ...more


























