1 / 4
Click to zoom in
1 / 4
For Sale by Alan Ross Machinery Corp
Surplus Record Dealer Since 1973
Location: Zion, IL
Contact Rustin Ross
Phone Number: 847...> Show Phone Number 847-750-3339
Let the seller know you found their listing on Surplus Record!
Description
6" 30:1 L/D PE and PP Extrusion Line
System includes: Crusher / compactor with infeed conveyor with control panel
Two stage plastic extruder:
1) 150mm x 4500mm (30:1) primary, double vented with vacuum system & 2 stage
filtration
2) 150mm x 1800mm (12:1) secondary, single vented with 2 stage filtration
• Equipment:
• Manufacturer: Huaxing
• Model: HXSJ 150-DWM11
• Type: Three-Stage Plastic Extrusion / Recycling Line
• Condition: Used
• Year of Manufacture: 2019 (Typical)
• Processing Capacity:
• Throughput: 600–1,000 kg/hr (Approximately 1,323–2,205 lbs/hr)
• Compatible Materials: Polypropylene (PP), Polyethylene (PE)
• Feed System:
• Input System: Crusher / Compactor with Integrated Infeed Conveyor
• Controls: Dedicated Local Compactor Control Panel
• Primary Extruder:
• Screw Diameter: 150 mm (Approximately 6 in.)
• Barrel Size: 150 mm × 4,500 mm (5.9 in. × 177.2 in.)
• L/D Ratio: 30:1
• Degassing: Double-Vented Vacuum System
• Filtration: Dual-Stage Screen Changer
• Secondary Extruder:
• Screw Diameter: 150 mm (Approximately 6 in.)
• Barrel Size: 150 mm × 1,800 mm (5.9 in. × 70.9 in.)
• L/D Ratio: 12:1
• Degassing: Single-Vented
• Filtration: Dual-Stage Screen Changer
• Drive System:
• Main Drive Motor: 215 HP
• Motor Speed: 1,785 RPM
• Electrical:
• Voltage: 480V AC
• Phase: 3-Phase
• Frequency: 60 Hz
• Downstream Equipment:
• Cooling System: Water Bath Strand Cooling
• Cooling Equipment: Cooling Tank, Cooling Tower & Recirculation Pumps
• Dewatering: Vacuum Discharge Blowers
• Pelletizing: Strand Cutter with Vibrating Classifier Table
• Material Handling: Storage Cyclone with Pneumatic Discharge Blower
• Controls:
• Main Electrical Control Cabinet
• Integrated Extrusion Line Controls
• 60 Hz / 480V Electrical System
• Typical Applications:
• Post-Consumer Plastic Recycling
• Post-Industrial Plastic Reprocessing
• PP Pellet Production
• PE Pellet Production
• Plastic Film & Rigid Plastic Recycling
System includes: Crusher / compactor with infeed conveyor with control panel
Two stage plastic extruder:
1) 150mm x 4500mm (30:1) primary, double vented with vacuum system & 2 stage
filtration
2) 150mm x 1800mm (12:1) secondary, single vented with 2 stage filtration
• Equipment:
• Manufacturer: Huaxing
• Model: HXSJ 150-DWM11
• Type: Three-Stage Plastic Extrusion / Recycling Line
• Condition: Used
• Year of Manufacture: 2019 (Typical)
• Processing Capacity:
• Throughput: 600–1,000 kg/hr (Approximately 1,323–2,205 lbs/hr)
• Compatible Materials: Polypropylene (PP), Polyethylene (PE)
• Feed System:
• Input System: Crusher / Compactor with Integrated Infeed Conveyor
• Controls: Dedicated Local Compactor Control Panel
• Primary Extruder:
• Screw Diameter: 150 mm (Approximately 6 in.)
• Barrel Size: 150 mm × 4,500 mm (5.9 in. × 177.2 in.)
• L/D Ratio: 30:1
• Degassing: Double-Vented Vacuum System
• Filtration: Dual-Stage Screen Changer
• Secondary Extruder:
• Screw Diameter: 150 mm (Approximately 6 in.)
• Barrel Size: 150 mm × 1,800 mm (5.9 in. × 70.9 in.)
• L/D Ratio: 12:1
• Degassing: Single-Vented
• Filtration: Dual-Stage Screen Changer
• Drive System:
• Main Drive Motor: 215 HP
• Motor Speed: 1,785 RPM
• Electrical:
• Voltage: 480V AC
• Phase: 3-Phase
• Frequency: 60 Hz
• Downstream Equipment:
• Cooling System: Water Bath Strand Cooling
• Cooling Equipment: Cooling Tank, Cooling Tower & Recirculation Pumps
• Dewatering: Vacuum Discharge Blowers
• Pelletizing: Strand Cutter with Vibrating Classifier Table
• Material Handling: Storage Cyclone with Pneumatic Discharge Blower
• Controls:
• Main Electrical Control Cabinet
• Integrated Extrusion Line Controls
• 60 Hz / 480V Electrical System
• Typical Applications:
• Post-Consumer Plastic Recycling
• Post-Industrial Plastic Reprocessing
• PP Pellet Production
• PE Pellet Production
• Plastic Film & Rigid Plastic Recycling
Get Your Price from Alan Ross Machinery Corp!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
6" Welex, single screw extruder
Category: Extruders and Extrusion Lines
Seller: Meadoworks LLC
Location: Schaumburg, IL
Mfr: Welex
Machine location: United States (exact location available on request). This listing shows Schaumburg, IL because that is the Meadoworks office address, not where the machine is located..
JUST ADDED!
6" Davis Standard #60IN60TPIH, Extruder, 30:1 L/D, air cooled vented barrel, 500 HP Reliance AC motor, 13.4:1 gearbox ratio, Eurotherm control, 1998
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 60IN60TPIH
Year: 1998
Used Davis Standard 60IN60TPIH (1998) Extruder for Sale. This unit has a 6.0″ screw with a 30:1 L/D ratio, air cooled barrel, vented barrel design, and eight cooling zones covering five zones. The gearbox ratio is 13.4:1 with new bearings, driven by a rebuilt 500 HP Reliance AC motor. Power requirement is 460 ...more
6" Welex #6.0-30D, Single Screw Extruder, 500 HP, 30:1 L/D, Vented Barrel, Dynisco Hydraulic Screen Changer, 460V, 3 Ph., 60 Hz
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: 6.0-30D
used welex 6.0 30d 6" single screw extruder 500 hp, 30:1 l/d, vented barrel with dynisco hydraulic screen changer. featuring a 30:1 l/d ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. six barrel heating zones, nine die heating zones ...more
6" Merritt Davis #Polycycle-MS, ram stuffer extruder, 600 HP, 36:1 L/D, 7 barrel zones, 125 RPM, 2001
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Model: POLYCYCLE-MS
Year: 2001
Used 6" Merritt Davis Standard Ram Stuffer, Model Polycycle MS Series, 600 Hp 36:1 L/D Ratio, Vented, 7 Barrel Zones, Air Cooled, 4 Die Zones, 14:1 Gearbox Ratio, 125 Max RPM, 600 HP DC Motor With Control Techniques Drive and Eurotherm Temperature Controls Wide Mouth Rectangular Grooved Feed, Pneumatically Operated ...more
6" Ensine, cold feed silicone extruder, 8:1 L/D, power feed roll, straight delivery head
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Ensine
Item 6109 - One (1) Used Ensine 6" (150mm) Cold Feed Silicone Extruder, 8:1 L/D, power feed roll, straight delivery head.
