Buy or Sell Your Circular Cold Saw Machine
AI-ranked results for circular cold saw machine - closest matches first
20" x 13" DoAll #2013-V, vertical band saw, vari-speed, 2 HP, 26" x 26" table, 154" x 1/2" blade
Lenmark Industries | Langley, BC
Category: Vertical Band Saws
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Doall
Model: 2013-V
SKU: 101323, Model: 2013-V, Condition: Used, S/N: 457-891268, Horsepower: 2 hp, Table Size: 26" x 26", Voltage: 230/460 volts, Phase: 3-phase, Saw Type: Bandsaws, CNC: No, Made In: UNITED STATES, Dimensions: 80.00 (H) x 47.00 (W) x 56.00 (L) inches, Additional :, Throat: 20", Speed: 55 - 5200 rpm ...more
13" Erwtech & UCG, flying double cut cold saw, 14.96" x 17.71" blade
Universal Tube & Rollform | Perrysburg, OH
Category: Carbide, Friction and Cold Saws
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Erwtech
UTUBE NUMBER: 4070, MANUFACTURER: ERWTECH & UCG, Product Dimensions: 13″ x 13″ x.393″ (330 x 330 x 10 mm), Cutting Length: 118″ – 1,300″ (3,000 – 33,000 mm), Wall Thickness:.11″ –.629″ (3 – 16 mm), Material: 80 KSI Yield, Saw Blade Diameter: ...more
12" Cam-Wood #TRS-3200TBX, Slat Ripper, 4-3/4" depth, 10" min. workpiece L, 4000 RPM, 12" L spindle, 60 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: TRS-3200TBX
Year: 2026
CAM-WOOD MODEL TRS-3000TB.12" SLAT RIPPER - (1) top & (1) bottom rip spindle.CAM-WOOD MODEL TRS-2050TB.8" SLAT RIPPER - (1) top & (1) bottom rip spindle - DEDUCT $8,000 for the 8" Cap. modelS: -- The machine can plane or shape the wood at two surfaces and then rip it. Ideal for shutters, louver slats ...more
Elumatec #DG-104/02, CNC Double End Mitre Cut-off Saw, 2005
Revelation Machinery | Chicago, IL
Category: Miter Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Elumatec
Model: DG-104/02
Year: 2005
Make: Elumatec, Model: DG-104/02, Year: 2005, Machine Location: Michigan, Bed Length: 4,500mm/177″, Minimum Cutting Length at 90°: 13.7795″, Minimum Cutting Length Tilted at 45°: 13.7795″, Pivoting Range Inwards: 90° – 45°, (Up To 22.5° Manual with Digital Display), Tilting ...more
Cat 938M, Wheel Loader, 7367 hours, S/N: J3R05652, 2018
Ohio Cat Heavy Machinery | Broadview Heights, OH
Category: Wheel Loaders
Seller: Ohio Cat Heavy Machinery
Location: Perrysburg, OH
Mfr: Caterpillar
Model: 938M
Year: 2018
CAB, DELUXE, CAMERA, REAR VIEW, COUNTERWEIGHT,3770LBS,HEAV,7PC, DIFFERENTIAL,LIMITED SLIP REAR, ENGINE AR, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, CRANKCASE, GUARD, DRIVESHAFT, GUARD, POWERTRAIN, LOWER, GUARD, POWERTRAIN, SIDE, HYD,3V,COUPLER READY,STD LIFT, I09, KIT,SERIALIZED TECHNICAL MEDIA, LANE 2 ORDER ...more
12" x 12" DoAll #C-305A, 60-350 FPM, chip conveyor, coolant, 5 HP, #68346
Yoder Machinery Sales | Holland, OH
Category: Horizontal Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: C-305A
SERIAL NUMBER. 497-92196, YEAR. 1992, MODEL. #305A, CAPACITY. 12" X 12", CAPACITY ROUND. 12", BLADE SPEEDS. 60 TO 350 FPM (VARIABLE), SAW BAND. 1-1/4" WIDE X 144" LONG, FRONT UNLOAD TRAY. YES, AUTOMATIC INDEXING. 16"', MULTIPLE INDEX. 48", HYDRAULIC VISE. YES, HYDRAULIC BLADE TENSION. YES, CHIP CONVEYOR. YES ...more
Cam-wood, TX-P3200PL, Sliding Table Saw, 122" cut length, 126" x 16" table, 9 HP, 1" arbor, 14" blade diameter, 5.3" thickness, 2026, new
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD TX-P3200PL Sliding Table Saw w/Motorized Raise/Lower/Tilt & Programmable Rip FenceHeavy-duty construction, vibration-free operation. Easy to set up and quickly adjusts. High accuracy, free movement sliding table without wear resistance.Specially designed double rollers carriage made by aluminum profile. ...more
Cam-Wood #BX-1616-HR-TNX, Horizozntal Band Resaw, 16" H x 16" width, 90 FPM, 30 HP, 28" x 2" band wheel, 201" x 3" blade (not included), 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1616-HR-TNX
Year: 2026
CAM-WOOD BX-1616HR-TN Two-Head Band Resaw Can be used to cut boards, cants, or reclaim slabs; max. working height up to 16" H under pressure roller x 16" W; 1/4" - 12" between blade and conveyor; VFD controlled variable speed from 0 - 90 FPM.: -- 30 HP Saw Motor (each head), 28" x 2" dynamically balanced cast iron ...more
Convenience Food Systems #VSM-325, Food Sliber & Processor, 325L/Batch, 12 Bladed
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Convenience Food
Model: VSM-325
Urschel, Model RAA, Stainless steel USDA approved cutter. Capable of slices, dices, and strip cuts at speeds from 2500 to 5000 lbs. per hour. 14" x 15" product infeed and 7" wide product discharge with 26" discharge height. Unit is capable of cutting up to a 3½" diameter log of product. ...more
Webber #AT90-120, top loading freezer, 72" W x 42" L x 48" D, -120°F
W H Kay Co, The | Cleveland, OH
Category: Lab Freezers
Seller: W H Kay Co, The
Location: Solon, OH
Mfr: Webber
Model: AT90-120
Webber Top Loading Freezer, Model AT90--120 S/N 5091, 460/3/60 45 Amps, -120 Deg F., Interior Dims: 72" Wide x 42" Long x 48" Deep, Stainless Steel Lined Top Loading Freezer complete with Pneumatic "Cigar Box" Opening Lid, (2) Rear Mounted Recirculating Fans, Air Cooled Condenser, and (2) Copeland Compressors (Low ...more
Cam-Wood #RS-660X, radial arm saw, 4 HP Motor; 4-1/8" cutting depth, 16" diameter blade, 45" max trimming width x 35" max crosscu, 0-180 degree saw head rotation, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-660X
Year: 2026
CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.: -- 4.5 HP Motor; 5-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0 - 180 Saw head rotation with positive locks on rotating ...more
47" x 55" DoAll #1400SA Hercules, sawing system, 50-262 FPM, Siemens Saw Control
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: 1400SA
47” X 55” Sawing System with Siemens Saw Control Work Light Hydraulic Band Tension Automatic Guide Arm Setting Automatic Feed Control with Programmable Feed Rates Variable Vise Pressure Control - Set of 2 Power-Driven Band Brush Complimentary DoALL Cutting Fluids Package One (1) DoALL Bi-Metal Saw Blade ...more
18" x 24" Hem #VT120HA-60 Smart saw automatic vertical band saw with mitering, 16' 6" x 1.25" x .42"blade
Perfection Global | Elk Grove Village, IL
Category: Vertical Band Saws
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Hem
Model: VT120HA-60
Capacities 90° Saw Capacity: 18" x 24"45° Left Miter: 18" x 16"45° Right Miter: 18" x 14.75"60° Left Miter: 18" x 10"60° Right Miter: 18" x 9"Blade Size: 1.25" x 16'6" x 0.42"Arm Cant: 3°Brush Size: 0.5" x 4"Variable Speed Drive: 65-400 SFPMDrive Motor: 7.5 HPHydraulic System: 5 HP ...more
4.3" Cantek #MRS-340M-1, (1) Shifting Blade Gang Rip Saw, 4.3 thick w/14" diameter fixed blade, 13.8" travel L, 23.5" min. stock L, 50 HP, 3800 RPM, 135 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: MRS-340M-1
Year: 2026
CANTEK MRS-340M-1 GANG RIPSAW WITH (1) SHIFTING BLADE and the following and s: Capacities are: -- 4.3" Max. thickness with 14" dia. fixed blade(s); 3.3" with 12" fixed blade(s); 4" with 14" moveable blades and 2.95" with 12" moveable blades; 13.4" max. working width between outside saws. 25.6" max. overall width; -- ...more
Safety Speed #6400, vertical panel saw, 8" blade capacity
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed
Model: 6400
SAFETY SPEED MFG - 6400: Mid-Level Vertical Saw -- 3 HP Industrial duty saw motor; 8" blade cap. with: 1-3/4" Max. material thickness. -- 64" Crosscut (vertical position) with: Spring-loaded counterbalance system; unlimited rip cap. -- 90 Saw head rotation to switch between cross- and rip cut modes; triangulated ...more
Smart Machine Tool Trim Saw
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Smart Machine Tool
Smart Trim Saw, Good Condition.
5" Dake #370S, semi-auto non-ferrous cold saw, 1997, S/N #2697
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Dake
Model: 370S
Year: 1997
MODEL:370 S, S/N: 2697, CAN MITER UP TO 45 DEGREES, CAPACITY: TUBE.5", SOLIDS 3-5/8", SQUARE 4", RECTANGLES: 4"X 7", 4.5 HP DRIVE, WEIGHT 1350 LBS, LISTING ID#25530.
APV, Plate Evaporator System Separator Vessel, Stainless Steel, w/(3) Heat Exchangers, (2) Centrifugal Pumps, Vacuum Pump
Perry Videx LLC | Hainesport, NJ
Category: Evaporators
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Apv
Used Stainless Steel APV Plate Evaporator System, Separator vessel, (3) Heat Exchangers - Schmidt, Vacuum Pump, (2) centrifugal pumps, Unit #1: Plate Heat Exchanger API Heat Transfer Model 866-1000-39, Serial Number: NP081018-201, Year: 2008, Part Number: 4-006-GBF-039-001, Dry Weight: 2,295 lbs (1,041 kg), Hot MAWP: ...more
Hatebur Coldmatic AKP 4-5
Reid Machinery Inc | Lansing, MI
Seller: Reid Machinery Inc
Location: Lansing, MI
Year: 1992
HATEBUR COLDMATIC AKP 4-5 Asset: L069 Model: KP 4-5 Capacity: 70 Ton per station Cold Forge: Feed on roll 5 forming stations + cutting Max pcs per min: 150 pcs Approximate Net Weight: 23 Ton are correct to the best of our knowledge but are subject to correction upon inspection. All sales are subject to our ...more
11.7" x 11" DoAll #DC-280NC, production band saw, PLC, 151"-1-1/4" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-280NC
11-¾” x 11" Band Saw with PLC Control for All Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise Pressure Control ...more
Altendorf #WA-8, Sliding Table Saw, 122" cutting length, 15-3/4" saw diameter, 4.92" @ 90° depth of cut, 7.5 HP main motor, 5000 RPM, 220 Volt, 2014
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Altendorf
Model: WA-8
Year: 2014
ALTENDORF - WA-08: Sliding Table Panel Saw -- 7.5 HP Main motor; max. 400 mm (15-3/4") saw dia. with: 30 mm Arbor; 3,000/4,000/5,000 RPM. -- 130 MM (4.92") Depth of cut at: 90; 91 mm (3.58") depth of cut at: 45. -- 1 HP Scoring saw motor; 120 mm dia. scoring blade; 15 mm arbor. -- 122" Cutting length; 126" anodized ...more
John Deere #437E, Knuckleboom Loader, w/ CSI Delimber & ground saw, trailer, 6200 hours, 2019
Carolina Machinery Sales | Monroe, NC
Category: Knuckleboom Loaders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: John Deere
Model: 437E
Year: 2019
2019 John Deere 437E Knuckleboom Loader, 6,200 hours, Big John Trailer, CSI PTD-264 Delimber, CSI DL4400 Ground Saw.
Quadco QUADCO 521 22C-S360 SAWHEAD, S/N: QFH22SC363, 2023
Milton Cat - Heavy Machinery | Milford, MA
Category: Harvesting Heads
Seller: Milton Cat - Heavy Machinery
Location: Brewer, ME
Mfr: Quadco
Model: QUADCO 521 22C-S360 SAWHEAD
Year: 2023
1,150 RPM SAW SPEED, 22" CUTTING CAPACITY, FOR USE ON CATERPILLAR 521, INCLUDES MOUNTING PINS, NUMBER OF TEETH: 16, QUADCO 22C-S360 SAWHEAD, QUADCO PART NUMBER QFH6351-360CTR, SOLD AS IS.
JUST ADDED!
20' Emmegi #Precision-T2-Pneumatica-TU/5, Twin-Head Double Miter Saw, 19.69" saw blade diameter, 5.5 HP, 2250 RPM, 95 psi, 2012
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Emmegi
Model: PRECISION T2 PNEUMATICA TU/5
Year: 2012
EMMEGI PRECISION T2 PNEUMATICA TU/5 Twin Head Double Miter Saw for Window Profile Fabrication - 6 Meter (20 ft.)Twin head, cutting off machine with: (3) Controlled axes with automatic movement of the mobile head, and electronic management of all 45 (internal) to 15 (external) angles. Blades feed driven by: ...more
Original #3558, radial arm saw, 7.5 HP, 20" diameter blade, 1" x 3-1/8" saw arbor, 6-1/4" thickness, 32" crosscut, 21-5/8" max miter cut, 48-3/4" rip, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3558
Year: 2026
ORIGINAL 3558 RADIAL ARM SAW (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy-duty cast and ductile iron for vibration-free operation. : -- 7.5 HP TEFC Saw ...more
16.5" x 26.5" Northtech #HB-700, vertical band saw, 39" x27.5"table, 45° table tilt, 202.8"blade, 2000
Perfection Global | Elk Grove Village, IL
Category: Vertical Band Saws
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Northtech
Model: HB-700
Year: 2000
Cutting Capacity (W x H): 26.5" x 16.5"Saw Wheel Diameter: 27.5"Table Size: 39" x 27.5"Table Tilt: 0 - 45°Width of Wheel: 3"Wheel Speed: 720 RPMBlade Length: 202.8"Main Motor: 10 HPFeeder Motor: 1 HPLength of Roller: 5.9"Diameter of Roller: 7.87"Feed Speed: 196.85 IPM - 787.4 IPM, Power Feeder HF-150A.
25" x 40" W.F. Wells #B25-4, Heavy Duty Horizontal Band Saw, 15000 lbs. capacity, 318" x 2.6" Blade, 26" Bandwheel, 60-500 FPM, 15 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: B25-4
W.F. Wells 25″ x 40″ Heavy Duty Horizontal Band Saw, B25-4, Inventory # 8004, Model: B25-4, Made in USA, Capacity:, Round:, @ 90°: 25 1/2″, Rectangular:, @ 90°: 37″ x 40″, @ 45°: 25″ x 24″, Weight Capacity: 15,000 lbs., Blade Speed: 60 – 500 FPM, Blade Size: ...more
Miller, performarc pa1100ss, Robotic Weld Cell, Panasonic #TA-1900 robot, 13 lb payload, 74.6" reach, Dip Pulse Hmiii350, Dual Light Curtains, 2012
Revelation Machinery | Chicago, IL
Category: Industrial Robots
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Miller
Model: PERFORMARC PA1100SS
Year: 2012
Make: Panasonic, Model: TA-1900, Year: 2012, Machine Location: Upon Request, Payload Capacity: 13 lb, Maximum Reach: 74.6 in, Robot Controller Input Power: 3-phase, 200 VAC ±20 VAC, 22 kVA, Control Axes: 6, Position Detection: Electronic absolute pulse encoders, Motion Control: PTP, linear, circular ...more
Cam-Wood #CS-37-AGX2, Stake Sharpener, 2"-3" Angle Cutting Length, 2"-3" Work Thickness, 13-3/4"-37.5" Work Length, 50-70 deg. Arrow Angle, 14" diameter Saw Blade, 5 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-37-AGX2
Year: 2026
CAM-WOOD CS-37-AGX2 Stake SharpenerAutomatic Stake - Pyramid / Arrow - Chisel end point cutting machine with automatic feeding, cutting and out of cycle. Magazine for quick lumber stacking input. Easy set-up operation. : -- Angle Cutting Length 2"; to 3";. -- Working Thickness 2"; to 3";. -- Working Length 13-3/4"; to ...more
23.6" Mecal #TDC-622-Edgemaster, twin head automatic double end miter saw, 23.6" blade, 2016
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mecal
Model: TDC-622-EDGEMASTER
Year: 2016
MECAL TDC 622 Edgemaster Twin Head Double Miter Saw For Window Profile Fabrication - 6 Meter (20 ft)CNC up-stroke double head compound miter saw with powered movement of the right head by means of a DC servomotor. The left hand side unit is stationary.The saw carries ∅ 600 mm (23.6″) saw blade. Compound ...more
Cam-wood, TX-P3200SA, Sliding Table Saw, 126" cut length, 126" x 17" table, 7.5 HP, 1" arbor, 14" blade diameter, 5.3 thickness, 8000 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Table Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD TX-P3200SAX Sliding Table Panel Saw w/Motorized Raise & Lower.Heavy-duty construction, vibration-free operation. Easy to set up and quickly adjusts. High accuracy, free movement sliding table without wear resistance.Specially designed double rollers carriage made by aluminum profile. Stable, torsion-free ...more
25" x 40" W.F. Wells #B-25-2, Hydraulic Twin-Post Band Saw, 15000 lbs. capacity, 318" x 1.5" Blade, 26" Bandwheel, 60-500 FPM, 10 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: B-25-2
W.F. Wells 25″ x 40″ Hydraulic “Twin-Post” Band Saw, B-25-2, Inventory # 5832, Model: B-25-2, Made in USA, Capacity:, Round:, @ 90°: 25 1/2″, Rectangular:, @ 90°: 25″ x 50″, @ 45°: 25″ x 24″, Weight Capacity: 15,000 lbs., Blade Speed: 60 – 500 ...more
Natural Gas Liquids Extraction, refrigerated joule thomson effect, 15000M, skids
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- joule thomson effect, refrigerated joule thomson effect (j-t) natural gas liquids extraction plant" consisting of: mol sieve dryer skid and accumulator/economizer skid: and jt skid with liquid separators: - 1,535 mbtu/hr cold gas/ gas exchanger, 1200 psig tube 720 psig shell - high pressure cold separator, 24" x ...more
8" x 11" DoAll #DS-280M, dual miter manual band saw, 107" x1" blade, 115/230 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DS-280M
8” x 11" Band Saw with 2-Speed Gear Box Flood Coolant Blade-Driven Band Brush 3.3 ft (1M) Manual Set Work Stop Tool Kit Complimentary DoALL Cutting Fluids Package One (1) DoALL Bi-Metal Saw Blade Instruction and Parts Manuals on CD or USB Data Stick., Cutting Capacity Round Tube: 9"Cutting Capacity Rectangle: ...more
731 sq.ft., Spiral heat exchanger, Kurose, 304 Stainless Steel, 128/71 psi, 1984, #24933
Federal Equipment Company | Cleveland, OH
Category: Spiral Heat Exchangers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Kurose
Year: 1984
Used 731 sq. ft. Kurose Spiral Heat Exchanger, 304 stainless steel construction, 4' diameter x 5' straight side, rated 128 psi at 356 F hot side, 71 psi at 356 °F cold side, (2) 6" process side inlet/outlet, 4", 2" shell side inlet/outlet, serial# 06820-SH, national board# 46, built 1984.
Elumatec #DG-244/02, twin head automatic double end miter saw, 5.5 HP, Windows based touch screen Elumatec controller, 2008
Equipment Hub | Stone Mountain, GA
Category: Miter Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Elumatec
Model: DG-244/02
Year: 2008
Stock #: 170240060, Location: Stone Mountain, GA, Brand: Elumatec, Model: DG 244/02, Serial #: 244009993, Year: 2008, Approx. Shipping Weight: 5000 Lbs., Approx. Shipping Dimensions: 24' L x 8' W x 7' H, Cutting Bed Length: 30', Minimum Cutting Length at 90 Degrees: 13-3/4", Minimum Cutting Length ...more
Caterpillar 963K WASTE, Track Loader, 10665 hours, S/N: LBL00797, 2018
Carter Machinery Co. Inc. - Machinery | Salem, VA
Category: Track Loaders
Seller: Carter Machinery Co. Inc. - Machinery
Location: Winchester, VA
Mfr: Caterpillar
Model: 963K WASTE
Year: 2018
963K HRC WST ES HD, AIR INLET, PRECLEANER, TURBINE, AIR PRECLEANER, CAB, BUCKET-GP, 3.25 CYD, HD PACK, CAB, DELUXE, CLEAN EMISSIONS MODULE TR4FINAL, COLD WEATHER, 120V, EASY ACCESS PACKAGE, ENGINE (SN: D8T41732), FAN, DEMAND, REVERSING, GUARD, FINAL DRIVE ABRASION 3P, GUARD, IDLER, HYDRAULIC 2V, GP JOYSTICK, PACK ...more
JUST ADDED!
12" x 20" Behringer #310-523G, mitering horizontal bandsaw, 28'10" x 2" x .063" blade, 1998
Wisconsin Metalworking Machinery | Waukesha, WI
Category: Horizontal Band Saws
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Behringer
Model: 310-523G
Year: 1998
, MAKE. BEHRINGER, MODEL. 310/523G, SERIAL NUMBER. 498162, AGE (YEAR). 1998, CAPACITY, ROUND 90 DEGREES. 12", RECTANGLE 90 DEGREES. 20" WIDE X 12" HIGH, BLADE DIMENSIONS. 28'10" X 2" X.063", MITERING IN BOTH DIRECTIONS, CNC CONTROL, DOUBLE COLUMN, The HBP-310/523G/A saw is mounted on a massive steel base with ...more
RMT S-GENIUS #HSC, servo feed cold saw, 3 models, 31" stroke feed, 14" or 17" or 18" blade diameter, 20 HP
Revolution Machine Tools Inc | North Salt Lake, UT
Category: Carbide, Friction and Cold Saws
Seller: Revolution Machine Tools Inc
Location: North Salt Lake, UT
Mfr: Rmt
Model: HSC
-Mass production in continuous operation is done by S-GENIUS HSC™ Cold Saws, when producing cut-off pieces of steel and non-ferrous metals. They are designed to be used with TCT (Carbide Tipped) circular saw blade in order to cut solid bars in high speed and excellent accuracy., -It is also suitable for HSS ...more
3.94" Amada #CMB100CNC, cold saw, 15 HP, 14.1" blade diameter
Machinery Network Inc | Encino, CA
Category: Carbide, Friction and Cold Saws
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Amada
Model: CMB100CNC
Year: 2017
BLADE DIA 14.1", POWER 15 HP, CONTROL CNC (Amada), DIMENSIONS 7' x 7' x 28' long with loader, WEIGHT 7,700 lbs., ;, Capacity, Cutting Capacity Round (Diameter) 0.98" - 3,94" 25 - 100 mm.
13" x 14" Marvel Spartan #PA13/3, heavy duty semi-auto horizontal billet saw, 13' 6" x 1.25" x .042" blade, 60-330 SFPM
Sterling Machinery Exchange | South El Monte, CA
Category: Horizontal Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Marvel
Model: PA13/3
Round Cutting Capacity 13" Rectangle Cutting Capacity 13” X 14” Saw Blade Dimensions :13’6” X 1.25” X.042" Blade Speeds 60-330 SFPM Hydraulic Pump 1 HP Coolant Pump 1/8 HP Table Height 27-1/2” WEIGHT 27-1/2” Work Load Capacity 6,250 Lbs. Maximum Index Length 20" Weight (Approx.) 4,500 LBS. s Hydraulic ...more
27" x 31" DoAll #DC-700NC, production band saw, PLC, 325" x2-5/8" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-700NC
27” x 31″ Band Saw with PLC Control for all Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise Pressure Control Spring ...more
Cefla #Mito, spray system, Sorbib cleaning brush, reciprocating feed thru system for waterborne & solven borne coatings, 2009
Ex-Factory | Charlotte, NC
Category: Paint and Powder Systems
Seller: Ex-Factory
Location: Charlotte, NC
Model: CEFLA #MITO
Year: 2009
CEFLA - MITO,.Complete Spraying System with SORBINI Cleaning Brush.Reciprocating Feed Through System for Waterborne & Solvent-Borne Coatings: The max. flexibility and technology for the continuous spraying of any kind of raised panels.s: -- Machine designed with a solid structure: LASER 3D; full accessibility ...more
36" width x 96" D x 36" H Wisconsin Oven, gas, 1000°F
W H Kay Co, The | Cleveland, OH
Category: Tempering Furnaces
Seller: W H Kay Co, The
Location: Cleveland, OH
Mfr: Wisconsin
Wisconsin Oven Recirculating Box Tempering Furnace, Includes (optional) Stationary Quench Tank & Pneumatic Elevator Quench Rack System., I.D. 36" Wide x 96" Deep x 36" High, Gas-Fired 1000 Deg F., Recirculating Box Tempering Furnace with Combination Vertical / Horizontal Air Flow, Top Mounted 10 H.P. Recirculating ...more
16" x 16" Amada #HA-400W, Manual Horizontal Saw, 0.5"-16" round diameter, 15' x 0.050" x 1.5" blade, 50-295 ft/min, 7 HP, 230 V., 3PH, 2000
Revelation Machinery | Chicago, IL
Category: Horizontal Band Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Amada
Model: HA-400W
Year: 2000
Make: Amada, Model: HA-400W, Year: 2000, Machine Location: Connecticut, Cutting Capacity Round (Diameter): 0.5″-16″, Cutting Capacity Rectangle (W x H): 16″ x 16″, Work Load Capacity: 5,511 LBS, Blade Dimensions: 15′ x 0.050″ x 1-1/2″, Blade Speed: 50-295 FT./MIN, Tension ...more
JUST ADDED!
11" Remi-Eisele #VMS-300, Manual Cold Cut Saw, 3.5" round, 3" x 3" square, 4.75" x 3" rectangle, 80 RPM, 600 Volt, 2015
Trader Machinery Inc | Concord, ON
Category: Carbide, Friction and Cold Saws
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Remi-Eisele
Model: VMS-300
Year: 2015
3.5"3" X 3"4.75" X 3"40 / 80 RPM600V/3/604.9 / 5.7.
16.5" Atech #CRATER-02-A, pneumatic miter upcut saw, 5.5 HP, 16.5" blade diameter, miters up to 45 degress, 2026, new
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Atech
Model: CRATER-02-A
Year: 2026
ATECH CRATER-02A 16.5" Miter Upcut SawHeavy duty construction for long machine life; moveable back fence enables you to cut bigger profiles on both straight and miter cuts. -- : -- 5.5 HP Saw motor; 16.5" dia. blade; (2) horizontal and (2) vertical pneumatic clamps to provide firm material hold-down through cutting ...more
4.3" Eisele #VMS-1VPV, cold saw, 15.75" blade diameter, miters, power blade elevation, 1975
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Eisele
Model: VMS-1VPV
Year: 1975
SERIAL. 5712, MODEL. VMS 1VPV, YEAR NEW. 1975, BLADE DIAMETER. 15.7", BLADE SPEED. 25/12.5 RPM, DOWN FEED. VARIABLE, CAPACITY. 4330.71", MITRES. YES, POWER BLADE ELEVATION. YES.
12" Holytek #HP-11, horizontal band saw, 4270" mm x 25" mm x .89mm blade, 725mm blade, 55 FPM, 2015
Ex-Factory | Charlotte, NC
Category: Horizontal Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: HP-11
Year: 2015
HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. : -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 to 7 -- Electroni display of ...more
14" CTD #N90, high speed cold saw, #76406
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ctd
Model: N90
SERIAL. 328, MODEL. N90/14, VERTICAL FRAME & NOTCHING SAW. YES, CAPACITY TOE NOTCH. 5.5 X 5.5 X 3" DEEP, BLADE DIAMETER. 14", ARBOR. 5/8", SPEED. 3450 RPM, FLOOR TO TABLE. 36", DUAL PALM BUTTON. YES, ELECTRIC FOOT PEDAL. YES, AIR PRESURE REQUIMENT. 100 PSE, STOKE PER MINTUE. 10.
Buehler Isomet #11-1180-160, slow speed wet saw
Ingalls Process Equipment | Painesville, OH
Category: Carbide, Friction and Cold Saws
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Buehler
Model: 11-1180-160
One(1) used Buehler Isomet Slow Speed Saw Cat. no. 11-1180-160 Serial no. 282-15-2605 Slow speed wet saw Single phase, 60 cycle, 115 volt Unit was test run, video available.
Caterpillar 336, Crawler Excavator, 1368 hours, S/N: DKS20653, 2022
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Excavators
Seller: Wagner Equipmet - Heavy Machinery
Location: Windsor, CO
Mfr: Caterpillar
Model: 336
Year: 2022
336-07 HEX, 797 GD 3/21/24, BATTERY, COLD WEATHER, BEARING, SWING STD, BLOCK HEATER, 120V, BOOM TUBE W/EOU, BOOM, REACH 21'4", CAB MOUNT, ROPS, CAB, DELUXE, CAMERA, 360 VISIBILITY, CAT CERTIFIED USED, COMMON ARRANGEMENT, CONSISTS OF:, CONTROL, QC, COOLANT, COLD WEATHER, COUNTERWEIGHT, 14,990LBS (6.8MT), COUPLER ...more
Eisele #VMS111-8350, cold mitre saw, manual hand feed/clamping, coolant pump
D & D Industries Inc | Monclova, OH
Category: Carbide, Friction and Cold Saws
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Eisele
Model: VMS111-8350
MODEL #: VMS111-8350, SERIAL #: NM0041403, MITRE BASE, MANUAL HEAD FEED, MANUAL CLAMPING, COOLANT PUMP, 9" W x 10' L IN FEED AND OUT FEED GRAVITY ROLLER CONVEYORS, 2-1/2 HP WORK HEAD MOTOR, GOOD CONDITION.
18" Cam-Wood #CS-18AAT-8/12/16X, Auto Cutoff Saw, (45) cutting cycle per min., 10 HP arbor, 3200 RPM, 90 psi, (1) 4" dust hood, 2026, new
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18AAT-8/12/16X
Year: 2026
CAM-WOOD CS-18AAT-16 Automatic Cutoff Saw with 16’ Automated Pusher or Stop providing efficiency and accuracy. Cutting Envelopes: -- 4-1/4" x 10". -- 2-1/4" x 12-1/4". -- 1-1/2" x 12-1/2". -- 1/2" x 13-1/2". : -- (45) Cutting Cycles per Minute. -- 10 HP Arbor Motor. -- 18"; Saw Blade Diameter with 1"; Saw Arbor. ...more
Caterpillar 326 LR, Crawler Excavator, 2701 hours, S/N: MFJ20153, 2022
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Excavators
Seller: Wagner Equipmet - Heavy Machinery
Location: Bloomfield, NM
Mfr: Caterpillar
Model: 326 LR
Year: 2022
326 07 EXCAVATOR ARRANGE, 326 COMMON ARRANGEMENT, 4755 BW 3/10/26, ANTIFREEZE, -50C (-58F), BATTERIES, 4, BKTA DC 60" 0.97YD3 (A), BLOCK HEATER, 120V, BOOM TUBE, SLR, BOOM, SUPER LONG REACH, CAB, DELUXE, CAMERA, 360 VISIBILITY, CAT CERTIFIED USED, COLD STARTING, ETHER, CONSISTS OF:, COUNTERWEIGHT, 14,770LBS, CYLINDER ...more
Caterpillar 745-04, Articulated Truck, 1600 hours, S/N: 3T607298, 2023
Finning Canada | Edmonton, AB
Category: Articulated Dump Trucks
Seller: Finning Canada
Location: Sechelt, BC
Mfr: Caterpillar
Model: 745-04
Year: 2023
Emissions Module, Tires 875/65R29 MX XAD-65 E-3, AM/FM Radio (Bluetooth Ready), Mirror Electric Heated, Standard Chassis, Cold Weather Starting Aid, For more information please contact Cait Wolfe, If sold within Finning territory: Customer Value Agreement (Preventative Maintenance program) included. Contact Sales Rep ...more
7 sq.ft., Alfa-Laval, CP15-H-30, vertical plate/block exchanger, 195 FV psi, (30) plates Compabloc
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2015
ITEM NO : 113352 QTY : 1 ALLOY : S SQ.FT. : 7.9 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS BLOCK PSI (S) : 195FV PSI (T) : 195FV TEMP. DEG. F (S) : 392 TEMP. DEG. F (T) : 392 TUBE HOLES : 30 PLATES PASSES (S) : 1 PASSES (T) : 3 V/H : V CODE : YES Used 7.9 sq. ft. Vertical Plate/Block Exchanger, Mfg by Alfa Laval in ...more
Cam-wood TX-P10AATX, Front Load Automatic Panel Saw, 128" max rip cut, 128" max pull-bak, 10 HP, 1" arbor, 4" depth, 6.3" scoring blade, 2026, new
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: Shop Saw -- : 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 15 HP (11.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade ...more
2" x 8" Industrial #3870 & 3550, finger jointer
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3870
INDUSTRIAL - 3870 & 3550: Finger Jointer Medium Production2" x 8" Finger Jointer and 3550 Press with (3) Saws. -- "3870" Right & left Shaper Section, left-hand discharge. -- Shaper cap.: 1/2" - 2" Thickness; 1-1/2" - 8" width (8" with lugs on 12" centers); 5-1/2" - 48" max. material length. : -- NO Scoring ...more
16-1/2" x 16-1/2" DoAll #DC-420NC, production band saw, PLC, 192" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-420NC
16-½” x 16-½” Band Saw with PLC Control for all Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise ...more
Skyjack, Inc. SJ6826RT, Lift Scissor, 615 hours, S/N: A200002899, 2022
Ziegler Cat - Used | Minneapolis, MN
Category: Scissor Lifts
Seller: Ziegler Cat - Used
Location: Minneapolis, MN
Mfr: Skyjack
Model: SJ6826RT
Year: 2022
Kubota Dual Fuel Engine, Cold Weather Start Kit, Outriggers, 5' Deck Extension, Engine Type - Propane, Steering - 2 Wheel.
22 sq.ft., Alfa-Laval, Vertical Plate/block Exchanger, 195fv PSI, 392°F, 2015, #113351
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2015
ITEM NO : 113351 QTY : 1 ALLOY : S SQ.FT. : 22 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS BLOCK PSI (S) : 195FV PSI (T) : 195FV TEMP. DEG. F (S) : 392 TEMP. DEG. F (T) : 392 TUBE HOLES : 90 PLATES PASSES (S) : 1 PASSES (T) : 2 V/H : V CODE : NB Used 22 sq. ft. Vertical Plate/Block Exchanger, Mfg by Alfa Laval in ...more
16-1/2" Atech #ZIGMA-02-SA, pneumatic double miter, (2) 16-1/2" diameter saw blades, max 164" at 90 degree straight cut, (2) 3 HP saw motors with 32 mm arbor, 2026, new
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Atech
Model: ZIGMA-02-SA
Year: 2026
ATECH ZIGMA-02 SA Semi-Automatic Heavy Duty Miter Saw (Digital)(2) 16-1/2" Dia. saw blades; designed for straight or miter cutting of vinyl, aluminum and wood.: -- Cuts approx. 8" x 5" at 90, 5.7" x 5" at 45; min. 17" length, max 164" @ 45; min. 8" length; max 164" @ 90 straight cut. -- (2) 3 HP Saw motors with 32 mm ...more
DoAll #DC-1200CNC Hercules, dual column table saw, 47.25" x 63", 50-262 fpm, 15 HP, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Table Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-1200CNC
47.25” x 63" Table Saw with Mahler Saw Control Material Clamp on Moving Work Table Work Light Hydraulic Band Tension Automatic Feed Control with Programmable Feed Rates Power-Driven Band Brush Chain Chip Conveyor with Large Pan Tool Kit Complimentary DoALL Cutting Fluids Package One (1) DoALL Bi-Metal Saw Blade ...more
Cat 265, Skid Steer Loader, 30 hours, S/N: KR407177, 2025
Wyoming Machinery - Cat | Gillette, WY
Category: Skid Steers
Seller: Wyoming Machinery - Cat
Location: Gillette, WY
Mfr: Caterpillar
Model: 265
Year: 2025
5 LB FIRE EXTINGUISHER, BUCKET-GP, 80", BOCE, CAB PACKAGE, PRO PLUS, CARRIAGE, PAL C2, 46", SSL, CERTIFICATION ARR, P65, COLD STARTING PACKAGE (120V), COUNTERWEIGHT,MACHINE,EXTERNAL, DOOR, CAB, POLYCARBONATE, FORK, PAL C2, 48" X 4" X 1.6", FUEL, ELECTRIC PRIMING, GUARDING / SEALING PKG, (HD1), HEATER, ENGINE COOLANT ...more
Omga #RADIAL-600-P3S, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-600-P3S
Year: 2026
OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180 Swivel of entire saw carriage for mitered crosscuts. -- 45 Saw head tilt for compound miter ...more
20.1" x 16.1" Behringer #HBE-411A, horizontal band saw, dual column, 225.6" x 1-1/2" blade, 5.1 HP, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: Horizontal Band Saws
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Behringer
Model: HBE-411A
Year: 2021
Behringer HBE411A Band, Horizontal, Dual Column:Round capacity: 16.1″Rectangular capacity: 20.1″ x 16.1″Smallest round capacity: 0.4″Smallest rectangular capacity: 0.4″ x 0.3″Saw blade: 225.6″ x 1-1/2″ x 0.05″Blade speeds: 33 – 360 FPM (infinitely ...more
14" Drake, cold saw, 230 V., 3-phase, 2.5 HP, swivel base, vise
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Drake
(Dake) Condor 350 14" Coldsaw. This machine runs on 230 v 3 phase power. It has a 2.5 hp motor with 2 speed 14" blade. 20/40 RPM blade speed. Swivel base 45 degree L to R. : Electric Controls, Vise, Coolant in base cabinet..
11-3/4" x 12-1/2" DoAll #DS-320SA, dual miter semi-auto band saw, 7" rnd, 10-240 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DS-320SA
11-3/4” x 12-1/2" Band Saw with Mitsubishi Saw Control Overfeed Protection Blade-Driven Band Brush 3.3 ft (1000mm) Work Stop Directly Mounted Work Height Sensor Variable Frequency Drive Work Light Flood Coolant Tool Kit Complimentary DoALL Cutting Fluids Package One DoALL Bi-Metal Saw Blade Instruction and parts ...more
Ironwood #SLR330, straight line rip saw, 10" blade, 1" arbor, 43" x 63" table, 15 HP
Equipment Hub | Stone Mountain, GA
Category: Woodworking Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Ironwood
Model: SLR330
Stock #: 121250044, Location: GA, Brand: Ironwood, Model: SLR330, Approx. Shipping Weight: 3,500 lbs, ifications, Blade Size: 10-12", Arbor Size: 1", Variable Feed Speed: 15-131 FPM, Minimum Material Length: 10", Material Thickness: 0.39" - 4", Saw Speed: 4100 RPM, Table Area: 43" x 63" ...more
5" ERWTech / UCG, high-speed flying cold saw, 2024, new
Universal Tube & Rollform | Perrysburg, OH
Category: Carbide, Friction and Cold Saws
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Erwtech
Year: 2024
UTUBE NUMBER: P24-010, MANUFACTURER: ERWTech/UCG, SERIAL NUMBER: 2024-HSCS-127/99/3, YEAR: 2024, Maximum Outside Diameter: 5″ (127mm), Maximum Wall Thickness:.236″ (6mm), Minimum Wall Thickness:.031″ (.8mm), Blade Type: HSS-TCT, Touch Screen Controls, Length Measurement System, LOCATION:, Universal ...more
Urschel #G, Stainless Steel compact dicer, up to 22000 PPH, 2 HP, mounted on Stainless Steel frame
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Urschel
Model: G
Urschel Model G, Stainless steel, compact dicer rated up to 22,000 lbs per hour – depending on materials and application. Accepts up to 5-1/2" OD product and utilizes slice, crosscut, and circular knifes. Cut thickness: slicing blade 1/8" to 5/8" crosscut knives 9/32" to 3", and circular ...more
18" Cam-Wood #CS-18LX, pneumatic cutoff saw, 10 HP, 45 cycles per minute, pre-wired controls with magnetic motor starter, 4" diameter dust extraction port, infeed & outfeed tables, 2026, new
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18LX
Year: 2026
CAM-WOOD CS-18L Pneumatic Up-Cut Saw (1/2" x 13-1/2", 2-1/4" x 12-1/4", 4-1/4" x 10" Capacity) Heavy Duty Cutoff Saw with double push button actuation.: -- "Incremental leaf" blade guard keeps hands clear of the cutting area. -- Activates the guard/clamp while activating the cut cycle; after cutting the clamping guard ...more
Cat 926M QC 3V, Wheel Loader, 469 hours, S/N: W5L03709, 2024
Wheeler Machinery | Salt Lake City, UT
Category: Wheel Loaders
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Caterpillar
Model: 926M QC 3V
Year: 2024
*CHASSIS AR, *ELECTRONICS AR, *HYDRAULIC AR, *INSTALLATION AR, *POWER TRAIN AR, AUX ECM, CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL, OPEN REAR, Engine, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYDRAULIC OIL, STANDARD, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, SL ...more
Baker #ABXX, Band Resaw, 12" H x 16" width timber, 95 FPM, 40 HP, 28" diameter band wheel, 14'-10" x 1" x 0.035" saw blade, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: ABXX
Year: 2026
BAKER ABXX Single-Head Resaw, 12" x 16" Cut Cap: Single-Head Band Resaw can be used to cut boards, cants, or reclaim slabs, This Resaw can process a Timber up to 12" H x 16 W" in any desired length. Hydraulic variable speed from 0 - 95 FPM. -- This Model "ABXX" Resaw covers a large range of applications from small to ...more
Cat 926M, Wheel Loader, 11074 hours, S/N: LTE06119, 2019
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Williston, ND
Mfr: Caterpillar
Model: 926M
Year: 2019
CAB, DELUXE, CAMERA, REAR VIEW, CTWT, STANDARD, 763LBS, 2 PCS, CUTTING EDGE, BOLT ON, 4 PIECE, DIFFERENTIAL,LIMITED SLIP REAR, ENG SN D8T47456 MSO 8HVPD, ENGINE AR, ENVIRONMENT, STANDARD, FENDERS, STANDARD, HYD,3V,COUPLER READY,STD LIFT, JUMPER LINES, 3RD FUNCTION, KIT,SERIALIZED TECHNICAL MEDIA, LANE 3 ORDER, LIGHTS ...more
Cat 930M, Wheel Loader, 217 hours, S/N: F5K03196, 2023
Wyoming Machinery - Cat | Gillette, WY
Category: Wheel Loaders
Seller: Wyoming Machinery - Cat
Location: Cheyenne, WY
Mfr: Caterpillar
Model: 930M
Year: 2023
*CHASSIS AR, *ELECTRONICS AR, *HYDRAULIC AR, *INSTALLATION AR, *POWERTRAIN AR, AUTOLUBE, BUCKET-GP, 3.2 YD3, FUS, BOCE, CAB, DELUXE, CARRIAGE, CON, FORK, 72", FUS, CERTIFICATE OF ORIGIN, ENGLISH, CTWT, HEAVY, 2668LBS, 5PCS, DIFFERENTIAL, OPEN REAR, Engine, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, CRANKCASE ...more
18" x 18" Indotech #CNC-18-DC-Smart-saw, dual column CNC bandsaw, 1.5" x0.05" blade, Omron cnc, coolant, chip conveyor, 1 year warranty, 2025
Myers Technology Co LLC | Elk Grove Village, IL
Category: Horizontal Band Saws
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Indotech
Model: CNC DC 18 SMART SAW
Year: 2025
Indotech model CNC DC18 Smart saw, horizontal dual Column CNC bandsaw, Auto feed and speed files with ballscrew and servo head feed, Auto Lube, variable vise Pressure, 10" HMI Touch screen, Bundling clamps, Rotary encoder for exact downfeed feedback, Cant head, Blade deviation,1.5" Blade, Movable control, 10HP, 10" ...more
Chori Machine, Abrasive Cutoff Saw, 406 x 3 x 25.4
National Machinery Exchange | Newark, NJ
Category: Abrasive Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Chori Machine
Cam-wood #SFJ-460LX, Finger Joint Assembly, 181" x 6" x 3", 0-26 FPM, 3500 RPM, 5 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SFJ-460LX
Year: 2026
CAM-WOOD SFJ-460L FINGER JOINT ASSEMBLY PRESS SYSTEM With Optional Gluing: -- The SFJ-460L is an automatic Assembly System, Cutoff Saw, and Press. The system performs three functions; pre-assembles finger jointed blocks with glue previously applied in the FSG 150 manual Glue Applicator (not included), cuts the ...more
13. 5" x 5" Butcher Boy, vertical band saw, 1 HP, 1725 RPM, 208-230/460 V., 3-phase
Genemco | Hearne, TX
Category: Vertical Band Saws
Seller: Genemco
Location: Hearne, TX
Mfr: Butcher Boy
Butcher Boy Vertical Band Saw. Product clearance: 13-1/2 in. W x 5 in. H. Push button control panel. (2) Chain conveyor belts. Band saw width: 1/2 in. Woods E-trac AC Inverter. (4) Wheels for easy maneuverability. Baldor Motor, 1 hp, 1725 rpm, 208-230/460 V, 7-3.4/1.7 amps, 60 Hz, 3 phase. Motor, 3 hp, 1732 rpm, 415 ...more
JUST ADDED!
Cat 982M, Wheel Loader, 17315 hours, S/N: MK610136, 2018
Fabick Cat | Fenton, MO
Category: Wheel Loaders
Seller: Fabick Cat
Location: Milwaukee, WI
Mfr: Caterpillar
Model: 982M
Year: 2018
**ATTACHMENTS PICTURED ARE, 982M WHEEL LOADER, 982M WHEEL LOADER AM-N DCA8, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AUTODIG & CPM PAYLOAD READY, AUTOLUBE, AXLES, OPEN/OPEN, ED, AOC, BE INCLUDED IN THE PRICING**, BUCKET-GP, 142 IN. 9.25YD3, CAB, DELUXE, CERT EMISSIONS, EPA TIER 4, COOLING CORES, 9 ...more
10" x 17" Wellsaw #W-10-2, horizontal band saw, 2-post, 1" blade
D & D Industries Inc | Monclova, OH
Category: Horizontal Band Saws
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Wellsaw
Model: W-10-2
Year: 1991
MODEL #: W-10-2, SERIAL #: W10-91165, 10" x 17" CAPACITY, 10" ROUNDS, 2 POST, 1" BLADE, HYDRAULIC CLAMPING, SAWING FORCE HYDRAULIC 0-750 POUNDS, HYDRAULIC ELEVATION, COOLANT, HYDRAULIC BLADE TENSION, 60-500 FPM BLADE SPEED, YEAR: 1991, 84" LR x 41" FB x 60" TALL DIMENSIONS, 3300 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
3" x .125" FMS #FCO-CS-76-3 milling type flying cut-off saw, new
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Carbide, Friction and Cold Saws
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
Mfr: Fms
Model: FCO-CS-76-3
Cat 420XE, Backhoe Loader, 119 hours, S/N: H9X01879, 2022
Ziegler Cat - Daniel | Minneapolis, MN
Category: Backhoe Loaders
Seller: Ziegler Cat - Daniel
Location: Fergus Falls, MN
Mfr: Caterpillar
Model: 420XE
Year: 2022
EROPSA/CHEATERLIGHTSRADIOFRONT IT Q/CFRONT AUX HYDSE-STICK4WDPROD LINKREAR COMBO HYDSAUTO UP STABLIZERS1.31 CYD GP BUCKETAUTOSHIFTRIDE CONTROLREAR DIG BUCKET, 420 XE 07A BACKHOE LOADER CFG1, AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BELT, SEAT, 2" SUSPENSION, BUCKET, HOE, (NONE), BUCKET-GP, 1.31 YD3, IT, CAB, DELUXE ...more
Nichols, Corner Block Machine, 3-head, 10-12 BPM, 12" diameter blade
RT Machine | Hughesville, PA
Category: Woodworking Drills
Seller: RT Machine
Location: Hughesville, PA
Mfr: Nichols
Trim saw unit to cut mitered edges 12" Diameter Blade Trim Saw Motor 3HP Maximum 2-1/2'' square stock Miter adjusts 38-52 degrees Three (3) horizontal angle boring motors One (1) vertical boring motor Drill Unit Motors 1HP Estimated production of 10 to 12 blocks per minute from literature. Call for verification.
Brewco #BBBH, Resaw Band Saw, 20/5 HP, 8" diameter wheels, 6" wide x 8" high capacity, 21" to 72" length, 3' 2" x 1-14" x 0.035 band
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Brewco
Model: BBBH
BREWCO - BBBH,.6-Head Horizontal ResawComplete with the following s & : -- Working Dimensions: 6" Wide x 8" high capacity and length 21" to 72". -- Band: 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings; Quick & easy blade height adjustments. -- Wheel diameter: 28" Dia.; CNC machined; dynamically ...more
Hyd-Mech, semi automatic cold saw, 2 C370-2SI heads, 14.5" blade, 2008
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Carbide, Friction and Cold Saws
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Hyd-Mech
Year: 2008
HYD-MECH 2 HEAD SEMI AUTOMATIC COLD SAW, MODEL OF HEADS: C370-2SI, S/N: H-10-08-1118, NEW: 2008, MAX DISTANCE BETWEEN HEADS 62", CAPACITY: 4.76" ROUND SOILDS, CAPACITY: RECTANGULAR 7"X 4", MITER 60 DEG. LEFT, 45 DEG. RIGHT, HP OF HEADS 7.5, 14.5" BLADE, COOLANT SYSTEM, 480 VOLT 3 PHASE.
15.7" x 13" DoAll #DC-330NC, production bandsaw, PLC, 167" x1.25" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-330NC
15-¾” x 13" Band Saw with PLC Control for All Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise Pressure Control ...more
Sinico Sin-O-Matic #TOP2000, twin spindle CNC cutting machine
AM Industrial | Brook Park, OH
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Cleveland, OH
Mfr: Sinico
Model: TOP2000
Sinico Sin-O-Matic TOP2000 Twin Spindle CNC Cutting Machine, Call for Price.
JUST ADDED!
10" Kalamazoo #TL-275, manual cold saw,
Wheeler Machinery Sales | Pomona, CA
Category: Carbide, Friction and Cold Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kalamazoo
Model: TL-275
KALAMAZOO TL-275 Manual Cold Saw #8146 #1, Blade Diameter: 275mm (10 inches)., Capacity: Ideal for small solid profiles and medium/thin-walled tubes., Mitering: Capable of 45 Deg. or 60 Deg. left/right miter cuts., Operation: Manual operation with a trigger handle, spring-assisted head, and integrated coolant system..
Vantec Double Arbor Gang Rip Saw inlet width 600 mm, inlet height: 70-260 mm
Carolina Machinery Sales | Monroe, NC
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Multirip circular saw for block cutting, with reinforced structure and high production speed. Trailed top and bottom rollers, upper rollers with adjustment, shafts with cartridge system for quicker and more efficient replacement of the set of saws, U-beam base with levelers and central lubrication. It does not come ...more
3-1/2" ERWTech / UCG, high-speed flying cold saw, 2023, new
Universal Tube & Rollform | Perrysburg, OH
Category: Carbide, Friction and Cold Saws
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Erwtech
Year: 2023
UTUBE NUMBER: P24-009, MANUFACTURER: ERWTech/UCG, SERIAL NUMBER: 2024-HSCS-89/98/2, YEAR: 2024, Maximum Outside Diameter: 3.5″ (89mm), Maximum Wall Thickness:.160″ (4.06mm), Minimum Wall Thickness:.030″ (.762mm), Blade Type: HSS-TCT, Touch Screen Controls, Length Measurement System, LOCATION: ...more
9.44" Eisele #VMS-00-S/FV, semi-automatic cold saw, exit conveyor, 1989
Perfection Global | Elk Grove Village, IL
Category: Carbide, Friction and Cold Saws
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Eisele
Model: VMS-00-S/FV
Year: 1989
Blade Diameter: 9.44"90° Flat: 5.5" x 2.75"90° Round: 3.14"45° Flat: 3.9" x 2.75"Exit Conveyor: 7' x 12"Entry Conveyor: 10' x 12".
10" KBC #CS-350, cold saw, 3 HP, 18/36 RPM
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kbc
Model: CS-350
MODEL. CS-350, BLADE DIAMETER. 12", BLADES SPEEDS. 18/36 RPM, CAPACITY ROUNDS @ 90. 41/2", CAPACITY ROUNDS @ 45. 4", CAPACITY RECTANGLES @ 90. 4"X 5-1/2", CAPACITY RECTANGLES @ 45. 4" X 4", MOTOR HORSEPOWER. 3.
Cat 930M, Wheel Loader, 6314 hours, S/N: F5K00577, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Williston, ND
Mfr: Caterpillar
Model: 930M
Year: 2020
ANTIFREEZE, -50C (-58F), CAB, DELUXE, CAMERA, REAR VIEW, CTWT, HEAVY, 2668LBS, 5PCS, DIFFERENTIAL, OPEN REAR, ENG SN J7A02407 MSO 9KVWV, Engine, ENVIRONMENT, STANDARD, FENDERS, EXTENDED COVER, GUARD, POWERTRAIN, LOWER, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, JUMPER LINES, AUX 3RD, FUSION, KIT,SERIALIZED ...more
7" x 11" DoAll #DS-280M, 2 speed dual miter manual band saw, flood coolant, #1120004
Vander Ziel Machinery Sales | Alto, MI
Category: Horizontal Band Saws
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Doall
Model: DS-280M
The DoALL DS-280M StructurALL® 2-speed, dual-miter band saw is designed for cutting vertical and angular material for low volume piece production. The DS-280M dual-swivel ability allows miter-cutting from 60° right and 45° left. The DS-280M s 2-speeds, a blade-driven band brush and a 3.3 foot manual set ...more
Cat 980, Wheel Loader, 583 hours, S/N: WFX01353, 2024
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Aurora, CO
Mfr: Caterpillar
Model: 980
Year: 2024
2628 BW 2/4/26, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AUTOLUBE, STD, Axle Oil Cooler, AXLES, OPEN/OPEN, AOCR, BKTA GP ST 137" 7.0YD3 PO, CAB, PREMIUM, STRG JOYSTICK, CAT CERTIFIED USED, COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CUTTING EDGE, BOLT-ON & CG, Engine, FAN, STANDARD, FENDERS ...more
Friulmac #Floormat-EQ, double end toner, 2005
Ex-Factory | Charlotte, NC
Category: Tenoners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Friulmac
Model: FLOORMAT-EQ
Year: 2005
Friulmac Floormat EQ Double end TenonerEach side top & bottom trims and (1) cope heads.Capacity: -- 1,500 mm ( 59") Max. x 225 mm ( 8.86") min. opening; -- Width 30 mm (1.18"), 250 mm (9.84") -- Thickness: 10 mm (.39") min. 35 mm (1.38") max.Includes: -- Motorized opening with LCD touch screen on the control ...more
6-1/2" CTD #PF200M, Cold Saw, 12" blade, 10 SPM, 3725 RPM, S/N 107R
Smith Machinery Co | Ames, IA
Category: Carbide, Friction and Cold Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Ctd
Model: PF200M
CAPACITY ------------------------ 2-1/2 in X 6-1/2 in @ 90°, 3-3/4 in X 3-3/4 in @ 90°, BLADE --------------------------- 12 in, STROKES PER MINUTE -------------- 10, RPM ----------------------------- 3725, NOTES:, SUBJECT TO VERIFICATION, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.
