Buy or Sell Your Vertical Press
AI-ranked results for vertical press - closest matches first
Dependable #203, Hydraulic Cold Press, 40" x 102" Capacity, 102" side loading, 34" wide x 40" deep platen, 45" daylight opening wi/ 12" down stroke cylinders
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dependable
Model: 203
DEPENDABLE - 203,.Cold Press40" x 102" Cap., side loading on 102" side: ● (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. ● 45" Max. daylight opening with 12" down stroke hydraulic cylinders. ● (6) Rows of pop-up rollers in machine bed for ...more
18" x .25" Press Room Equipment #P450F18-A-HC, servo feeder
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Servo Feeders
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Press Room Equipment
Model: P450F18-A-HC
(1) Used 18 wide x.170 thick PRE - Press Room Equipment Servo Feeder, 18" Maximum Width,.170" Thickness Capacity, 0 - 999.99 Feed lengths, Pendant For Jogging, Press Mounted, Pilot Release, Indramat CLM Control, 480/3/60, 18" Maximum Width,.170" Thickness Capacity, 0 - 999.99 Feed lengths, Pendant For Jogging, Press ...more
20 Ton, Press Master #BP-20, hydraulic C-frame press, 20" stroke, 36" daylight, 8" throat, #161187
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: BP-20
20 TON PRESSMASTER HYDRAULIC BROACHING PRESS MODEL BP-20 RATED CAPACITY. 20 TONS RAM SPEED.(PRESSING). 22.5 IPM*.(RETURN). 74 IPMBORE. 4"TABLE.(LR X FB). 18" X 13"… TABLE SLOT.″"DAYLIGHT.″6" STROKE ADJUSTABLE. 0 - 20" THROAT. 8" FLOOR TO TABLE. 26-1/2" FRONT ...more
15" x .093" Rowe #D15, servo feed, press mounted, serial #R030349-2, #13772J
Timco Inc | Columbia, TN
Category: Servo Feeders
Seller: Timco Inc
Location: Columbia, TN
Mfr: Rowe
Model: D15
ROWE 15" X.093" SERVO FEED, STOCK# 13772J, MODEL: D15, S/N# R030349-2, Press Mounted, 15" Wide,.042" Thick.
12000 lb. Coe Press Equipment #CPCC-12018/CPPS-500-18, heavy duty coil cradle straightener
S & G Press & Machinery Sales | Shelby Township, MI
Category: Coil Cradles and Straighteners
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Coe Press Equipment
Model: CPCC-12018/CPPS-500-18
Coil Weight 12000 pounds, Coil Width 18 inches, Coil Thickness.312 inches, Coe Press Equipment Coil Cradle Straightener, Special Heavy Duty Model CPCC-12018 & CPPS-500-18 Serial Number - D111448 12,000 lbs. Maximum Coil Weight 18" Maximum Coil Width 72" Maximum Coil O.D.,.312" Maximum Stock Thickness @ 18" ...more
Torrington #V82 Verti-Slide, .062" strip thickness, 2.5" strip width, 40-200 SPM, s/n #109418
Victory Machinery Exchange | Lake Forest, IL
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: V82
Catalog :, Maximum Strip Thickness:.062" Maximum Srtip Width: 2.5" Maximum Wire Diameter:.207" Wire Line Height: 49.375" Srrokes Per Minute: 40 - 200 Feed Stroke: 12" Press Capacity: 12 & 20 Tons Press Stroke: 1" Length of Die Area: 20" Shut Height of Press: 6.937" Press Ram Adjustment:.375" Maximum Working Area: ...more
350 HP 720 RPM U.S. Motors, Frame 5809PH, weather protected enclosure type 1, type HV-4, high thrust, VSS, vertical solid shaft, 1.15, 460 Volts (2 available)
Ace Armature Works | Greenwell Springs, LA
Category: Vertical Pump Motors
Seller: Ace Armature Works
Location: Greenwell Springs, LA
Mfr: U.S. Motors
Frame: 5809PH
JUST ADDED!
Italpresse #XL/10-38-16 PMBO, hydraulic hot press, 2007
Machinery Associates Inc | Hudson, NH
Category: Woodworking Hot Presses
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Italpresse
Model: XL/10-38-16
Year: 2007
Italpresse Model XL/10 38-16 PMBO Hydraulic Hot Press, Platen dimensions: 3,800 x 1,600 mm (149 x 63 in.), Number of daylights: 1, Total cylinder stroke: 400 mm (15-3/4 in.), Number of pressing cylinders: 10, Diameter of pressing cylinders: 85mm each, Total thrust: 190 metric tons (418,878 lbs), Max. laminating ...more
140 Ton, Wysong #THS140-120, high speed, 120", Hydraulic Press Brake, 13918, 13915 (2 available)
Yoder Brothers Machinery | Toledo, OH
Category: Hydraulic Press Brakes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Wysong
Model: THS140-120
Year: 2004
Weight20500 pounds, SERIAL. TH7-108, YEAR NEW. 2004 (4856 HOURS), MODEL. THS140-120, CAPACITY. 140 TONS, OVERALL LENGTH OF BED & RAM. 120", WIDTH OF BED. 5" DISTANCE BETWEEN HOUSINGS. 96" STROKE. 8" ADJUSTMENT. 9" MAX DIE SPACE. 17", THROAT. 7" RAM SPEED APPROACH (HIGH SPEED). 300 IPM RAM SPEED PRESS. 20 IPM, RAM ...more
170 Ton, Up-acting, 32" x 12", 2.5" stroke, 5"-32" adj. daylight, (3) 7" bore double-acting cylinders (#1552)
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: 1552)
THREE 7" BORE DOUBLE-ACTING CYLINDERS WITH 6" DIAMETER RODS AND APPROX 2.5" STROKE. DAYLIGHT IS ADJUSTABLE FROM APPROX 5" TO 32". THE UPPER PLATEN RIDES ON TWO 6" DIAMETER THREADED POSTS. THERE IS A DOUBLE SHAFT MOTOR ON TOP OF THE PRESS THAT IS TIED INTO TWO GEAR BOXES THAT TURN THE THREADED POSTS. THE DAYLIGHT IS ...more
150 Ton, Press Master #SP-150, straightening press, 16" stroke, 15 HP, #140368
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Straightening Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: SP-150
150 TON PRESSMASTER HYD. STRAIGHTENING PRESSMODEL SP-150T RATED CAPACITY. 150 TONSPRESSING SPEED. 6 IPMADVANCE SPEED. 24 IPMRETURN SPEED. 28 IPMTABLE WIDTH. 96"TABLE DEPTH. 20"FULL STROKE. 16"THROAT DEPTH. 12"DAYLIGHT. 26"FLOOR TO TABLE.″5"MOTOR. 10 HP STANDARD S: - CYLINDER ...more
JUST ADDED!
242 Ton, Ermaksan #PBF-4270-220, CNC press brake, 14' overall, 148.8" between housing, 10.8" stroke, 16.1" throat, 21.7" DL, Delem 58T, foot pedal
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermaksan
Model: PBF-4270-220
Year: 2026
Brown #B4042 thermoforming line, 40" x 42", 6" daylight, w/ former & T340 trim press. 1996
Arlington Machinery | Lake Zurich, IL
Category: Thermoformer Machines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: B4042
40" Brown model B4042 thermoforming line with, B4042 former and T340 trim press. New 1996 Brown model B4042 in line thermoformer with 3 roll cooling rolls. 40 x 42" Brown servo thermoformer with upgraded servo drives. Max daylight of 6" up and down. 40" wide Brown model T340 trim press with canopy servo index 40" x ...more
100 Ton, Niagara #HBM-100-10-12, CNC Hydraulic Press Brake, 12' Bed & Ram length, 10.5' Between Housings, 7" Stroke, 0' Throat depth, 7.5 HP, 2001
Yoder Machinery Sales | Holland, OH
Category: CNC Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Niagara
Model: HBM-100-10-12
Year: 2001
SERIAL. 54440, MODEL #. HBM-100-10-12, YEAR NEW. 2001, CAPACITY. 100 TONS, LENGTH OF BED & RAM. 12', DISTANCE BETWEEN HOUSING. 10'6, STROKE. 7", OPEN HEIGHT. 14", CLOSED HEIGHT. 7", DEPTH OF THROAT. 7", RAM SPEED - RAPID ADVANCE. 166 IPM, RAM SPEED - NORMAL PRESS. 64 IPM, RAM SPEED - ANTO BACK BAND. 20 ...more
40 Ton, Hydraulic Press, 11.8" stroke, 12" Shut Height
Universal Tube & Rollform | Perrysburg, OH
Category: Hydraulic Presses
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
UTUBE NUMBER: 4047, MANUFACTURER: CTON, Capacity: 40 Ton, Stroke: 11.8″ (300mm), Lower Press Bed: 20″ x 20″, Shut Height: 12″ (Approx.), Hydraulic Unit, 5HP, APPROXIMATE WEIGHT: 3,650 Lbs., LOCATION: Universal Warehouse, Perrysburg, Ohio, Searching for a Specific Machine? Our inventory is ...more
MAN Man Roland, Lithoman Web Offset Presses, 32-96 Pages, 38-104" width web
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Man Roland
Year: 2013
MAN ROLAND Lithoman Presses, 32 to 96 pages, commercial web offset, used condition. Ideal for high-capacity printing needs. Contact us for more and pricing., MAN Roland Lithoman –, --------------------------------------------, Page Counts Available:, - 32, 40, 48, 56, 64, 72, 80, 96 pages, Formats:, - Long-grain ...more
Toresani #MT265A, Stainless Steel Ravioli Machine, 60 lbs/hr to 103 lbs/hr, 9" diameter Hopper, 5" diameter x 7" L auger, 10" L x 3" width press, (2) 2-1/2" diameter x 10" L press roller
Genemco | Hearne, TX
Category: Pasta Equipment
Seller: Genemco
Location: Hearne, TX
Pavan Toresani Stainless Steel Ravioli Machine. Model: MT265 A. Type: 85322. 316 and 304 stainless steel components. Capacity ranges from about 60 lbs/hr to 103 lbs/hr depending on type of noodle desired. Hopper diameter: 9 in. Auger: 5 in. dia x 7 in. L. (2) Top paddles (removable). Press: 10 in. L x 3 in. W. (2) ...more
250 Ton, Press Master #SP-250T, straighten press, 16" stroke, 24" daylight, 10 HP, #140369
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Straightening Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: SP-250T
250 TON PRESSMASTER HYD. STRAIGHTENING PRESSMODEL SP-250T RATED CAPACITY. 250 TONSPRESSING SPEED. 4 IPMADVANCE SPEED. 17 IPMRETURN SPEED. 21 IPMTABLE WIDTH. 96"TABLE DEPTH. 20"FULL STROKE. 16"THROAT DEPTH. 12"DAYLIGHT. 24"FLOOR TO TABLE.″6"MOTOR. 10 HP STANDARD S: - CYLINDER ...more
Knuth #1-5 T Arbor Press
Blumberg Machinery Co | Bannockburn, IL
Category: Arbor Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: 1-5 T
1 T2 T3 T5 T Working Area Press force 5 10 15 20 Throat 4 in 6 in 7 in 9 in Work piece thickness (max.) 6 in 8 in 12 in 16 in Ram dimensions 1x1x10.5 in 1.2x1.2x13.2 in 1.4x1.4x17.7 in 2x2x25.4 in Measures and Weights Overall dimensions (length x width x height) 10x6x13 in 16x7x17 in 18x8x23 in 26x15x33 in Weight 37 ...more
20" Willis #20VS, single spindle drill, variable speed, 150-2000 RPM, 22" x 19-1/2" table, emergency stop, 2 HP
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Single Spindle Drill Presses
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Willis
Model: 20VS
WILLIS SINGLE SPINDLE DRILL, MODEL: 20VS, SERIAL NUMBER: 9907044, Floor Model, Drills To Center Of Circle: 20", Drilling Capacity In Cast Iron: 1-3/8", Drilling Depth, Manual Feed: 6-1/2", Maximum Distance Spindle Nose To Table: 28-3/4", Maximum Distance Spindle Nose To Machined Base: 39-1/4", Spindle Taper: No. 3 ...more
300 HP 1180 RPM Siemens-Allis, Frame 507UP, weather protected enclosure type 2,HT, 1.15 service factor, 2300/4160 Volts (2 available)
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: Allis-Chalmers
Frame: 507UP
100 Ton, Press Master #HFP-100-MWH, 12" stroke, 8" bore, movable workhead, #147576
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: HFP-100-MWH
100 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-100 MWHNEW - IN STOCK FOR IMMEDIATE DELIVERY RATED CAPACITY, TONNAGE. 100STROKE. 12"BORE. 8"RAM SPEED PRESS. 20 IPM RETURN. 26 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 48"DISTANCE BETWEEN POSTS (FRONT TO BACK). 13"MAXIMUM DISTANCE FROM BED TO ...more
JUST ADDED!
8' Jamestown #F-183-96-2D30, Fume Hood, Ducted, Vertical Sash
Quantum Technology | Shippensburg, PA
Category: Fume Hoods
Seller: Quantum Technology
Location: Shippensburg, PA
Model: F-183-96-2D30
Fume Hoods Do Not Include a Blower. If you need blower recommendations for this unit please ask. Keep your lab safe with the 8 Jamestown Fume Hood. Designed for optimal airflow, this ducted hood s a vertical sash. - 8-foot space for ample room- Vertical sash for easy access- Ducted for efficient ventilation- Durable ...more
125 Ton, Dake #18-151, 4-Post Hydraulic Press, 43" x 50" Bed, 20" Stroke, 40" Daylight, 34 IPM
Machinery Marketing International | Chicago, IL
Category: H Frame Hydraulic Press Machines
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Dake
Model: 18-151
Tonnage: 125, Bed Size: 43" x 50", Stroke: 20", Daylight: 40", Speed: 34" Per Minute, Pressing Speed: 17" Per Minute.
90 Ton, Cincinnati #90CBX8, CNC hydraulic press brake, 10' overall, 102" between housing, 8" stroke, 7" throat,Hurco Autobend 6 CNC Back Gauge
Wheeler Machinery Sales | Pomona, CA
Category: CNC Press Brakes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Cincinnati
Model: 90CBX8
Cincinnati 90CBX8 CNC Hydraulic Press Brake #7657 #1, Capacity: 90 Ton, Width: 10' (96"), Between Housings: 8' 6" (78"), Stroke Of Ram: 8", Open Height: 15", Closed Height: 7", Depth Of Throat: 7", Ram Speed Rapid: 150 IPM, Ran Speed Fast Press: 70 IPM, Ram Speed Pressing: 21 IPM, Ram Speed Return: 136 IPM ...more
6500 Ton, Loewy, Hydraulic Forging Press, 34" ram stroke, 12" draw, 10000 PSI
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Loewy
TONNAGE.6500 TONS, STROKE OF RAM.34", DISTANCE TOP OF BOLSTER TO FACE OF SLIDE WITH STROKE UP56.5", DRAW DEPTH.12", WORKING PRESSURE ON RUBBER PAD - MAX10,000-PSI, FORMING AREA - MAX. 10,000-PSI 1269 SQ. INCH, FORMING AREA - MAX. 6000-PSI.2115 SQ. INCH, OVERALL HEIGHT OF PRESS.46FT APPRX., HEIGHT OF PRESS ABOVE ...more
2" Nider #N1-50B, geared head drill press, 5-1/4" travel of spindle, #4MT
D & D Industries Inc | Monclova, OH
Category: Single Spindle Drill Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: N1-50B
MODEL: N1-50B SERIAL NO.: N/A Maximum Drilling Diameter 2” STEEL Maximum Travel of Spindle 5 1/4″ Taper of Spindle Hole Morse # 4 Distance – Center of Spindle to Vertical Column 12 5/8″ Spindle nose to table surface 33 1/4” max. Spindle nose to base plate surface 47″ max. Dimension ...more
60 Ton, Danly #60T, OBI press, 3-1/2" stroke, 13-1/2" Shut Height, air clutch, 100 SPM
Hariton Machinery Co Inc | Bridgeport, CT
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Danly
Model: 60T
Press Capacity 60T Stroke 3 1/2" Shut Height 13 1/2" Adjustment 3" SPM 100, Air Clutch, AC Motor and Controls.
40 Ton, Preco #1220-40T, 4-post hydraulic die cutting press, 4 stroke, 10" DL, (4) pneumatic clamps, 2021
Machnet | Santa Monica, CA
Category: Die Cutting Press Machines
Seller: Machnet
Location: Santa Monica, CA
Mfr: Preco
Model: 1220-40T
Year: 2021
2021 Preco 1220-40T, 40T Die Cutting 4-Post Hydraulic Press; Micrometer adjustment, 12" x 20", 10" Daylight, 10" Feed, 10HP, Preco Model 1220-40T Hydraulic Die Cutting Press, New: 2021, Capacity: 40 Tons, Platen Area: 12" D x 20" W, Daylight: 10" (Includes 2" Bolster), Roll Feed Diameter: 2.25", Max Feed Length: 10" ...more
90 Ton, Cincinnati #90CBIIX8, hydraulic brake, 8' overall, 78" between housing, 8" stroke, 7" throat, 15" open, Automec 99 Back Gauge, LD Control, 1996
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 90CBIIX8
Year: 1996
SERIAL. 49623, MODEL. 90 CBII X 8FT, YEAR NEW. 1996, CAPACITY. 90 TON, OVERALL LENGTH OF BED & RAM. 8', DISTANCE BETWEEN HOUSINGS. 6'6", STROKE OF RAM. 8", OPEN HEIGHT. 15", CLOSED HEIGHT. 7", DEPTH OF THROAT. 7", RAM SPEED RAPID APPROACH. 260 IPM, RAN SPEED FAST PRESS. 80 IPM, RAM SPEED PRESSING. 10/20 ...more
2000 Ton, Verson #TL-SE4-2000, transfer press, 30" stroke, 60" Shut Height, 12-24 SPM, 240" x108" die space, Allen Bradley
Toledo Press Industries | Detroit, MI
Category: Eyelet Transfer Press Machines
Seller: Toledo Press Industries
Location: Detroit, MI
Mfr: Verson
Model: TL-SE4-2000
Model, TL-SE4-2000, Tonnage, 2000 tons, Bed Size, 216'' x 108'', Bed Size: 216'' x 108'', Year: 1985 Tonnage: 2000T Model: TL-SE4-2000 Rating: ½” BDC DIE SPACE: 240” x 108” Bolster Size: 216'' x 108'' Stroke: 30” Shut Height: 60” Speed: 12 to 24 SPM Micro-inch through main motor 6 ...more
138 Ton, Energy Mission #PBE-1225, hydraulic press brake, 8' overall, 11.81" stroke, 3-Axis, new
Bud's Machine Tools | Murray, UT
Category: Hydraulic Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: PBE-1225
Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBE 1225Condition:New - Build-To-OrderStock #:1771Status:For Sale, Tonnage 138 T Type HYD Stroke 11.81" # Axis 3 Bending Length 8' Table Width 3.54" Clear Pass 80.71" Ram Stroke 11.81" Open Height 19.09" Throat Depth 15.75" ...more
Joos #DLP, End-Loading Feed-Through Hot Press, 63" x 124" Pressing Surface, 7.87" H Pressing Area, (6) 90 mm diameter Cylinders
RT Machine | Hughesville, PA
Category: Woodworking Hot Presses
Seller: RT Machine
Location: Hughesville, PA
Mfr: Joos
Model: DLP
Joos Model DLP 135 5' x 10' End-Loading Feed-Through Hot Press Pressing Surface: 1600 x 3150mm (63" x 124") Height of Pressing Area: 200mm (7.87") Six Pressing Cylinders 90mm Diameter Cylinders Elkom Okotherm Plus Platens Includes Two Recently Purchased Tool-Temp Heating Units This unit requires a rigger for ...more
150 Ton, RLM, 4-post cut-off press, 2 stroke, 106" x71.5"bed, 8" ram adj, 40 HP, Wichitaw clutch, S46265
Perfection Global | Elk Grove Village, IL
Category: Cut-off Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Rlm
Capacity: 150 TonStroke: 2"Bed: 106" x 71.5"Shut Height: 17"Ram Adjustment: 12" +Base to Press Bed: 52"Between Posts: 83.5" x 46"Post Diameter: 4.5"Motor: 40 hp, Upgraded Control PanelWichita Pneumatic ClutchHydraulic CylinderHydraulic Unit For Adjustable Base.
150 Ton, Press Master #GSP-150T/68, adj ram head straightening head, 12" stroke, 15.5" daylight, 10" bore, 72" x96"bed, 2015
T R Wigglesworth Machinery | Bedford, OH
Category: Hydraulic Straightening Presses
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Press Master
Model: GSP-150T/68
Year: 2015
150 Ton, PRESSMASTER, MODEL GSP-150T / 68, Year of MFG. 2015, 12" Stroke of Ram, 72" x 96" Bed, Travelling Column, Fully adjustable Straightening Press, Tonnage 150 T 136.078 t Dimensions 102" L x 132" W x 80" H 102" L x 132" W x 80" H Weight 16000 16000 MOEL: GSP-150T / 68, RATED ...more
60 Ton, Savage #60HTP, 4-post hyd.blanking trim press,light curtains,PLC, 1992, #A2756
Sterling Machinery Exchange | South El Monte, CA
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Savage
Model: 60HTP
Year: 1992
Tonnage 60 Ton Horsepower 30 H.P. Bed & Ram Size (L - R, F - B) 50" x 36" Stroke 6" Day Light 19" Pressing Speeds: Approach Speed 147 @ 25 GPM Pressing Speed 41 IPM @ 7 GPM Return Speed 289 IPM @ 25 GPM Type 4 Post WEIGHT 13,000 Lbs. Dimensions of Press (L x W x H) 79" x 58" x 138" Dimensions of Control 65" x 16" ...more
Beloit, 2-roll 129" vertical size press, with 23.570" x 129" face bottom roll & 22.725" top roll
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Beloit
Beloit 2-Roll 129" Vertical Size Press; with 23.570"D x 129" Face Bottom Roll and 22.725"D Top Roll, Manufacturer BELOIT Model SIZE PRESS Condition Used Stock Number 903705.105PF.
75 Ton, Wabash, Transfer Press, 4-Post, 7/18" Stroke, 15" x 15" Platens
Soberay & Sons Ltd | Cleveland, OH
Category: Molding Compression Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Wabash
Item 3040 One (1) Used Wabash Transfer Press, 15" x 15" platens, 75 Ton closing force, 25T-transfer press, electric platens, individual controls, adjustable daylight, self contained hydraulic unit, 4-post.
110 Ton, Scotchman #PressPro110, hydraulic h-frame press, 15" stroke, 36.5" DL, 43.25" BH
C.W. Wood Machinery Inc | Cincinnati, OH
Category: H Frame Hydraulic Press Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: PRESSPRO110
(NEW) SCOTCHMAN H-FRAME HYDRAULIC PRESS, MODEL: PressPro 110, *Heavy Duty All-Steel Construction, *Industrial Grade Hydraulic System, *Ram Moves Laterally For Added Versatility, *Three Ram Speeds, FACTORY, Press Force: 110 Tons, Stroke: 15", Open Height, Minimum: 7", Open Height, Maximum: 36-1/2", Width Between ...more
35 Ton, Betenbender #3514, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 36" x 16" Press Platen, 22.5" between housings, 10 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 3514
Betenbender HMI 35 Ton Hydraulic C-Frame Press, Inventory # 6901, Model: 3514, Made in USA, Tonnage Capacity: 35 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 36″ x 16″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
393 Ton, Up-acting slab-side press, 16" stroke, 20" ram, 22.5" daylight, 27.5" x24", #1813
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
20" DIAMETER RAM WITH APPROX 16" STROKE. 393 TONS AT 2500 PSI. MAX DAYLIGHT APPROX 22.5". FULLY GUIDED WITH 45 DEGREE ADJUSTABLE GIBS. OPERATOR HEIGHT IS APPROX 46". SLAB-SIDES ARE 3.5" THICK WITH 7" WIDE WINDOWS. TWO 3.25" BORE SIDE PUSH-BACK CYLINDERS WITH 25" STROKE. TOP MOUNTED HYDRAULIC POWER UNIT (CAN BE FLOOR ...more
100 Ton, Press Master #100T-E/H, pressure regulator, 12" stroke, 8" bore, double acting, #134265
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: 100T-E/H
100 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-100NEW - IN STOCK FOR IMMEDIATE DELIVERY RATED CAPACITY, TONNAGE. 100STROKE. 12"BORE. 8"RAM SPEED PRESS. 20 IPM RETURN. 26 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 42"DISTANCE BETWEEN POSTS (FRONT TO BACK). 13"MAXIMUM DISTANCE FROM BED TO ...more
98 Ton, Betenbender #10014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 10014
Betenbender HMI 98 Ton Hydraulic C-Frame Press, Inventory # 6905, Model: 10014, Made in USA, Tonnage Capacity: 98 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
141 Ton, Betenbender #14014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 14014
Betenbender HMI 141 Ton Hydraulic C-Frame Press, Inventory # 6907, Model: 14014, Made in USA, Tonnage Capacity: 141 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
62 Ton, Betenbender #6014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 42" x 17" Press Platen, 22.5" between housings, 15 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 6014
Betenbender HMI 62 Ton Hydraulic C-Frame Press, Inventory # 6903, Model: 6014, Made in USA, Tonnage Capacity: 62 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 42″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
60 Ton, Preco #2024-60T, hydraulic die cutting press, 4 stroke, 10" DL, 20" x24" platen, (4) pneumatic clamps, 2021
Machnet | Santa Monica, CA
Category: Die Cutting Press Machines
Seller: Machnet
Location: Santa Monica, CA
Mfr: Preco
Model: 2024-60T
Year: 2021
2021 Preco 2024-60T, 60T Die Cutting 4-Post Hydraulic Press; Micrometer adjustment, 20" x 24", 10" Daylight, 10" Feed, 10HP, Preco Model 2024-60T Hydraulic Die Cutting Press, New: 2021, Capacity: 60 Tons, Platen Area: 20" D x 24" W, Daylight: 10" (Includes 2" Bolster), Roll Feed Diameter: 2.25", Max Feed Length: 10" ...more
JUST ADDED!
Enerpat #AMB-H, Automatic Metal Baler, Continuous Feed, Conveyor Optional, 100-250 Ton Press, 40-dual 50 HP, 60 Bales/hr
Enerpat | Ontario, CA
Seller: Enerpat
Location: Ontario, CA
Mfr: Enerpat
Model: AMB-H SERIES
Hopper-Style AMB-H Automatic Scrap Metal Baler – fully automatic continuous press metal baler for high-volume scrap. Efficiently compresses light scrap including aluminum cans, metal turnings, metal chips, and other nonferrous materials into dense, easy-to-handle bales. Its large-capacity hopper allows ...more
Heidelberg Harris #M110C, 6-Color Web Offset Press, 8 page, 1997
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Harris
Model: M110C
Year: 1997
This 1997 Heidelberg Harris M110C is a 6-color commercial web offset press designed for publication, catalog, and specialty print applications. The M110C platform is well regarded for its mechanical reliability, compact footprint, and consistent print quality. When configured with sheeting and stacking, the press is ...more
30 Ton, 19.5" x 19.75", 16.5" daylight, 9" stroke, 15 HP hyd.unit, cntrls, light curtains, #1890
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
OVERALL BED SIZE L TO R IS 25.75"; F TO B BETWEEN THE POSTS IS 13.5"; NOMINAL BED SIZE IS 19.5" X 19.75". THERE IS A 16.5" X 8" CUT-OUT IN THE CENTER OF THE BED. PARKER CYLINDER: 5" BORE; 2" ROD; 9" STROKE (SERIES 2H; MOD 5.00 JB2HLT14A 9.00). MAX DAYLIGHT IS APPROX 16.5". FULLY GUIDED WITH 5" BUSHINGS ON 2" DIA ...more
393 Ton, Slabside press, 27" x 24", 22" daylight, 16" stroke, 20" dia.ram, 10 HP, Tenor 763 PLC, #1812
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
20" DIAMETER MAIN RAM WITH APPROX 16" STROKE. 393 TONS AT 2500 PSI. MAX DAYLIGHT IS APPROX 22.5" FULLY GUIDED WITH 45 DEGREE ADJUSTABLE GIBS. OPERATOR HEIGHT IS APPROX 46.5". SLAB-SIDES ARE 3.5" THICK WITH 7" WIDE WINDOWS. 3.25" SIDE PUSH BACK CYLINDERS WITH 25" STROKE. TOP MOUNTED HYDRAULIC POWER UNIT (CAN BE FLOOR ...more
Mereen Johnson #312-DC, Ripsaw w/ Twistlock Collars, 6" throat, 50 HP, 3600 RPM, TEFC, 3 HP, 30-235 FPM, New
RT Machine | Hughesville, PA
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen Johnson
Model: 312-DC
Mereen-Johnson Model 312-DC Ripsaw with Twistlock Collars Arbor space capacity: 12" Thickness to 3-1/2" using 14" dia. tooling 30" glue-joint accuracy 22" minimum length for bust-up only 6" throat GLUE LINE QUALITY CUT Motor: 50 HP 3600 RPM TEFC Mereen-Johnson direct arbor drive Arbor lock-out on access door Air ...more
JUST ADDED!
113 Ton, Bliss #28-1/2-M, OBI Punch Press, 46" x 33.5" table
Aucto | San Francisco, CA
Seller: Aucto
Location: Tempe, AZ
Mfr: Bliss
Model: 28-1/2-M
THE BLISS 28-1/2 OBI PUNCH PRESS IS A ROBUST MECHANICAL PRESS DESIGNED FOR METALWORKING APPLICATIONS, SPECIFICALLY AN OPEN BACK INCLINABLE (OBI) TYPE PRESS. THIS MODEL S A SUBSTANTIAL PRESSING CAPACITY OF 113 TONS. THE MACHINE IS A TABLE MEASURING 46 INCHES BY 33.5 INCHES. ADDITIONALLY, THE RAM PLATE SIZE IS 26 INCHES ...more
Knuth #KSB-Series, Box Column Drill Press, new
Blumberg Machinery Co | Bannockburn, IL
Category: Single Spindle Drill Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: KSB-SERIES
KSB 32AKSB 40BKSB 50CKSB 63B Working Area Drilling capacity 1.26 in 1.57 in 1.97 in 2.48 in Feed force, axial (max.) 9 16 16 30 Throat 11 in 13 in 13 in 15 in Vertical head travel 8 in 8 in 8 in 10 in Quill stroke 8 in 10 in 10 in 10 in Feed Z-axis (9) 0.0022 - 0.0709 in/R (9) 0.0022 - 0.0709 in/R (9) 0.0022 - 0.0709 ...more
125 Ton, PHI, 26.5" x 19.5", 21" to 25" daylight, 16" stroke, 4-post, 3 HP, #1967
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Phi
PHI MODEL S125MR-56S-16-24-G. 34.5" L TO R OVERALL; 11.5" F TO B BETWEEN THE POSTS. NOMINAL BED SIZE IS 26.5" X 19.5" (BUSHING RETAINING RINGS AROUND TIE-RODS UNDER CROWN REDUCE LEFT TO RIGHT CLEARANCE TO APPROX 25.25"). MAIN RAM IS 10.5" BORE; SINGLE-ACTING WITH APPROX 16" STROKE. DAYLIGHT IS ADJUSTABLE FROM APPROX ...more
50 Ton, (4) 31" x 24" platens, 124" x 24" bed, 4 cylinders @ 12.5 tons each, hand valve, #1970
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
HANDY MFG. CONSISTS OF FOUR INDIVIDUAL PLATENS THAT ARE APPROX 31" L TO R X 24" F TO B. THE BED IS APPROX 124" X 24". EACH PLATEN HAS A 3.25" BORE T.J. CYLINDER WITH 24" STROKE AND IS OPERATED WITH A HAND-VALVE. EACH CYLINDER AT 3000 PSI GENERATES 12.4 TONS…APPROX 50 TONS COMBINED*. DAYLIGHT IS 24" SO PRESS CAN ...more
12-5/8" Nider #N1-50B, geared head drill press, 2" drill diameter, 5-1/4 spindle travel, #4MT
Westway Machinery Ltd | Mississauga, ON
Category: Single Spindle Drill Presses
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Model: N1-50B
, ½” Chuck (1/16” – ½”), MODEL: N1-50B, SERIAL NO.: N/A, Maximum Drilling Diameter 2” STEEL, Maximum Travel of Spindle 5 1/4″, Taper of Spindle Hole Morse # 4, Distance – Center of Spindle to Vertical Column 12 5/8″, Spindle nose to table surface 33 ...more
Vac-U-Clamp #FT-1000-3DL Thermofoil Double Table Press
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Presses and Cold Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vac-U-Clamp
Model: FT-1000-3DL
Vac-U-Clsmp FT 1000 3DL/Thermofoil Double Table Press, Seller′s :, 3DL/Thermofoil Double Table Press, - Purchased New 01/2018, - Less than 500 Hours of Use, –, - Press Area Approx, 50″ x 105″, - 460/480VAC, 3 Phase, - Includes QTY 2, 6 Position Film Racks, - Custom Made Risers with Suction Cups ...more
6.5 Ton, Manestry #Beta, Tablet Press, SN 9316R
Federal Equipment Company | Cleveland, OH
Category: Tablet Press Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Manesty
Model: BETA
Used Manesty Betapress rotary tablet press, 16 station, keyed upper punch guide, single sided with hopper, 6.5 ton total compression pressure, pre-compression, 5/8" max tablet diameter, 11/16" max depth of fill, rated up to 90,000 tablets/hour, 230 volts, serial# 9316R. As Is.
18" Press Room Equipment, servo feeder
Timco Inc | Columbia, TN
Category: Servo Feeders
Seller: Timco Inc
Location: Columbia, TN
Mfr: Press Room Equipment
PRE 18" WIDE SERVO FEEDER, STOCK# 14219J, MAX MATERIAL WIDTH 18",.020" -.250" THICKNESS CAPACITY, 0-999.99 FEED LENGTHS, PENDANT FOR JOGGING, PRESS MOUNTED, PILOT RELEASE, INDRAMAT CLM CONTROL, 480/3/60, 4' X 4' X 4', APPROX WEIGHT 2,500 LBS.
4 gallon Ross #DPM-4, DS-4, double planetary mixer, DPM-4 gallon w/DS-4 discharge press
Archem Process Equipment Ltd | Matheson, ON
Category: Planetary Mixers and Blenders
Seller: Archem Process Equipment Ltd
Location: Matheson, ON
Mfr: Ross
Model: DPM-4 DS-4
USED ROSS DOUBLE PLANETARY MIXER DPM-4 GALLON WITH DS-4 DISCHARGE PRESS, Ross Double Planetary Mixer Model DPM-4 Gallon with DS-4 Discharge Press as follows:, Mixer:, Designed for operation under vacuum. Vacuum hood made of stainless steel, fitted with two sight/charge ports and a vacuum port Working capacity from ...more
50 Ton, Wilson, H-Frame Hydraulic Press, 31" Interior width, 67" bed to ram nose, 102" overall height, 12 height positions
MachineCo | Montreal, QC
Category: H Frame Hydraulic Press Machines
Seller: MachineCo
Location: Montreal, QC
Mfr: Wilson
Max pressing Capacity. 50 tons, Mfr. Brand. Wilson, Interior width. 31″, Max. Workspace. 67 ” bed to ram nose, Height overall. 102 in., No. height pos’ns. 12 (pin lock), Removeable ram nose. yes., Equipped:, Pair of flat block &. V-blocks on bed (dual Vs), Rapid capstan ram advance (rack & ...more
Sharp #VH-25, Vertical/Horizontal Combo Milling Machine, 10" x 56" table, 3 axis, 5 HP, 4500 RPM, 2018
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Sharp
Model: VH-25
Year: 2018
Spec Sheet:, 2018 Sharp VH-25 Heavy Duty Vertical/Horizontal Combo Milling Machine, Table Size (W x L/In.): 10 x 56, Vertical Spindle Taper: NMTB-40, Vertical Spindle Speeds Mechanical Variable Speed, Vertical Spindle Speeds Range (RPM): 60 - 4,500, Horizontal Spindle Taper: NMTB-40, Horizontal Spindle Speeds: 6 ...more
44 Ton, Williams, 21.5x17", up-act, 26" daylight, 12" stroke, 25 HP hydraulic system, 41" work hght, #34
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Williams
SERIAL #C-3027. FRONT TO BACK BETWEEN POSTS IS 9.5". NOMINAL BED AREA IS 21.5" X 17". MAIN RAM IS APPROX 7" DIAMETER WITH 12" STROKE. 26" DAYLIGHT. FULLY GUIDED WITH 4.75" BUSHINGS ON A 2.5" DIAMETER POSTS. 41" OPERATOR HEIGHT. TWO 3" BORE SINGLE-ACTING PUSH-BACK CYLINDERS. T-SLOTTED BED AND CROWN. HYDRAULIC ...more
100 Ton, Press Master #100T-E/H, H-Frame Hydraulic Press, 12" stroke, 8" bore, 20-26 IPM, 10 HP Baldor motor, 15-gallon oil reservoir, 2006
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: 100T-E/H
Year: 2006
100 TON PRESSMASTER H-FRAME HYDRAULIC PRESSMODEL HFP-100… S/N 06002151T… NEW 2006 RATED CAPACITY, TONNAGE. 100STROKE. 12"BORE. 8"RAM SPEED PRESS. 20 IPM RETURN. 26 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 42"DISTANCE BETWEEN POSTS (FRONT TO BACK). 13"MAXIMUM DISTANCE FROM BED TO ...more
Heckert #FU-450X1800, horizontal mill, 72" x21" table, 3-Axis digital read out, 20 HP, coolant, #71322
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Heckert
Model: FU450X1800
SERIAL. 326203/233, MODEL. FU450X1800, AREA OF TABLE. 72" X 21", TABLE SWIVELS. 45 DEGREES EACH WAY, HORIZONTAL SPINDLE SPEEDS. (18) 45 TO 2240 RPM, FEED RANGE, LONG AND CROSS. (18).63-31.5 IPM, FEED RANGE, VERTICAL. (18).20-10 IPM, LONGITUDINAL TRAVEL. 52", CROSS TRAVEL. 14", VERTICAL TRAVEL. 24-3/4", SPINDLE TAPER ...more
118 Ton, Betenbender #12014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 44" x 17" Press Platen, 22.5" between housings, 20 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 12014
Betenbender HMI 118 Ton Hydraulic C-Frame Press, Inventory # 6906, Model: 12014, Made in USA, Tonnage Capacity: 118 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Press Platen: 44″ x 17″, Floor to Press Platen: 36″, Distance Between Housing: 22 1/2″, Open ...more
53" wide x 99" long, GED #MHMO355013S624T00000, Heated Roller Press, 6" x 88" rolls, 480 V., 2008
Ex-Factory | Charlotte, NC
Category: Roller Type Conveyors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ged
Model: MHMO355013S624T00000
Year: 2008
GED - MHMO355013S624T00000 3550: High-Efficiency Oven & Roll Press i-3 - 24 EmitterThe fastest, most "energy efficient" way to produce IGUs, the Oven & Roll Press offers significant energy savings of.50% on units less than 42"; (1067 mm) wide over other IG ovens. With its high intensity infrared emitters and ...more
Knuth #KSB-25A, Box Column Drill Press
Blumberg Machinery Co | Bannockburn, IL
Category: Single Spindle Drill Presses
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: KSB-25A
Working AreaDrilling capacity 0.98 in Table set up area 16x22 in T-slots, width 0.6 in Number of T-slots 3 positions Quill stroke 8 in Table stroke 12 in Feed Z-axis (9) 0.0022 - 0.0709 in/R Feed force, axial (max.) 9 Spindle nose-to-table distance (max.) 29 in Throat 11 in Vertical head travel 8 in HeadstockSpindle ...more
175 Ton, Niagara #HBM-175-6-8, hydraulic press brake, 10" stroke, 17" open, 24" x96" bed, 30 HP, floor flush mounted
D & H Machinery Inc | Toledo, OH
Category: Hydraulic Press Brakes
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Niagara
Model: HBM-175-6-8
-175 Ton, -Model: HBM 175-6-8, -Bed: 24" x 96", -Stroke: 10", -Open Height: 17", -Closed Height: 7", -Rapid Advance: 115 IPM, -Rapid Return: 115 IPM, -Normal Press: 58 IPM, -Main Motor: 30 HP, Flush Floor Mounted.
25 Ton, Press Master #CFP-25, 12" stroke, C-Frame hydraulic press, 11" throat, #153710
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-25
25 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-25… BRAND NEW TONS OF FORCE.(MAX). 25 TONS APPROACH SPEED. 178 IPMPRESS SPEED. 26 IPMRETURN SPEED. 258 IPMTABLE.(LR X FB). 21" X 16"… DAYLIGHT. 18" MAX. STROKE ADJUSTABLE. 12" THROAT. 11" U-SLOT OPENING. 4"FLOOR TO ...more
220 Ton, Bystronic #PR-200, CNC Hydraulic Press Brake, 13' overall, 161.4" work, 8.5" stroke, 29 HP, 480 V., 2005
Revelation Machinery | Chicago, IL
Category: CNC Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Bystronic
Model: PR-200
Year: 2005
Make: Bystronic, Model: PR 200x4100, Year: 2005, Machine Location: Upon Request, Working length: 161.42″, Max Press Force: 224.8 Tons, Max Stroke: 8.46″, Rapid Approach: 5.12″/sec, Rapid Return: 5.91″/sec, Power of main motor: 29.5 HP, Total connected load: 40.2 HP, Operating Voltage: 480 V ...more
35 Ton, Piranha #3506, hydraulic press brake, 6' overall, 62" between housing, 4" stroke, 1-Axis CNC Back Gauge, 5 HP
Generation Machine Tools | Sarasota, FL
Category: Hydraulic Press Brakes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Piranha
Model: 3506
PIRANHA #3506 6’ x 35 Ton Hydraulic Press Brake & CNC Back Gauge USA #7982, PIRANHA #3506 6’ x 35 Ton Hydraulic Press Brake & CNC Back Gauge USA #7982, Reference # 7982, Model # 3506, Serial # 3506-1052, Year of manufacture- 2000’, Tonnage- 35 Ton, Bed length- 72”, Between frames- ...more
500 HP 1200 RPM Teco, Frame 5810P, TEFC, VSS, vertical solid shaft or VHS, vertical hollow shaft, New, 2300/4160 Volts
ESR Motor Systems LLC | Rock Hill, SC
Category: Vertical Pump Motors
Seller: ESR Motor Systems LLC
Location: Rock Hill, SC
Mfr: Teco
Frame: 5810P
250 Ton, USI Clearing #S2-250-84-54, 12" stroke, 30" Shut Height, 12" adj., 84" x54" bed, 36 SPM, 1984
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Usi Clearing
Model: S2-250-84-54
Year: 1984
PRELIMINARY USI CLEARING STRAIGHT SIDE PRESS MODEL: S2-250-84-54 S/N: 51-1546 YEAR: 1984 250 TON CAPACITY 12" STROKE 30" SHUT HEIGHT (S.D.A.U.) 12" SLIDE ADJUSTMENT 84" LR X 54" FB BED AREA 30" WINDOWS 36 SPM CLEARING PRESS CONTROL CABINET OMNILINK II OPERATOR TERMINAL SHADOW 8 WINTRISS LIGHT CURTAINS, T-STAND ...more
Heidelberg #M600A, Web Press System, (4) Print Unit, (1) Folder, 22.75" cutoff x 38" width, 150 kW press drive, 2001
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Heidelberg
Model: M600 A24
Year: 2001
2001 Heidelberg M600A (4) Unit Web Press System + (1) JF44 Folder, 22.75” (578mm) Cutoff x 38” (965mm) Width, - (1) Heidelberg Contiweb SH45-OI-1020 Splicer, - (1) Contiweb Infeed with web guide, - (4) Heidelberg M600 A24 Print Units, Full-Autoplate, Duotrol Dampening, CPTRONIC Remote Inking, Oxry Dry ...more
JUST ADDED!
400 Ton, Schuler #EHZPU-400-2500-1500, 2500 x 1500 mm Die Space, 1050 mm Stroke
Toledo Press Industries | Detroit, MI
Category: Hydraulic Presses
Seller: Toledo Press Industries
Location: Detroit, MI
Mfr: Schuler
Model: HZPU-400-2500-1500
Hydraulic Press – Schuler HZPU 400 2500/1500 Manufacturer: Schuler, Model: HZPU 400 2500/1500, Type: Hydraulic Press, Capacity, Nominal Press Force: 400 metric tons, Slide Return Force: 50 metric tons, Working Area, Bolster Table Size: 2500 × 1500 mm, Slide (Ram) Size: 2500 × 1500 mm, Stroke & ...more
175 Ton, Wysong #RT4-175-122, hydraulic press brake, 10.2' OA, 102" between housing, 8" stroke, #71106
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: RT4-175-122
SERIAL. RT-17-105-A, MODEL. RT4-175-122, OVERALL LENGTH OF BED. 10'2", DISTANCE BETWEEN HOUSING. 102", STROKE. 8", MAXIMUM DAYLIGHT. 18", MINIMUM DAYLIGHT. 10", THROAT. 12", ADVANCE SPEED. 126 IPM, PRESSING SPEED. 23 IPM, RETURN SPEED. 153 IPM, FLOOR STANDING. YES, CNC BACK GAUGE. YES, CROWNING DIE HOLDER. YES ...more
9 Ton, Waterbury-Farrel #2010-HT, ICOP Transfer Press, 10 Station, round plunger, 4.5" blank diameter, 1 5/8" draw, 90 SPM
National Machinery Exchange | Newark, NJ
Category: Eyelet Transfer Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
Model: 2010-HT
SERIAL. STD-8530-101-30, STYLE. ICOP, MODEL. 2010HT, NUMBER OF STATIONS. 10, PLUNGER DESIGN. ROUND, TONNAGE PER CAM. 9 TON, BLANK DIAMETER. 4.5", CENTER DISTANCE. 5", MAX DRAW. 1 5/8", TRANSFER SLIDE. 1" THICK, SPM. 90, MOTOR. 20 HP, PRESS WEIGHT - 25,000 LBS.
200 Ton, Press Master #HFP-200MWH, H-frame hydraulic press, 20" stroke, 12" bore
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: HFP-200MWH
200 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-200 MWH… BRAND NEW RATED CAPACITY, TONNAGE. 200STROKE. 20"BORE. 12" RAM SPEED PRESS. 6 IPMRAM SPEED (Inches/minute) ADVANCE. 24RAM SPEED (Inches/minute) RETURN. 29DISTANCE BETWEEN POSTS (RIGHT TO LEFT). 60"DISTANCE BETWEEN POSTS (FRONT TO BACK). ...more
Anderson #Duo, Expeller Press, 9" x 5', variable speed, water cooled, screw feeder, 50/15 HP
Aaron Equipment Co | Schaumburg, IL
Category: Industrial Food Auger Feeder Systems
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Anderson
Model: DUO
used- anderson duo expeller press. 9"x 5 variable speed screw feeder with 2hp motor and drive. 15hp vertical gear head motor with roller chain drive and safety guard. vertical discharge head with segmented worm shaft and breaker bolts. heavy duty horizontal main gear case with new herringbone precision gear, integral ...more
100 Ton, Press Master #GSP-100T, H-Frame hydralic press, gantry style, #148556
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: GSP-100T
100 TON PRESSMASTER H-FRAME HYD. PRESSMODEL GSP-100T-4/8 RATED CAPACITY, TONNAGE. 100STROKE. 16"BORE. 9"RAM SPEED ADVANCE. 24 IPM PRESSING.… 6 IPM RETURN.″1 IPMTABLE SIZE (RIGHT TO LEFT). 48"TABLE SIZE (FRONT TO BACK). 96"DAYLIGHT. 16.5"RAM TRAVEL (LEFT TO ...more
175 Ton, Wyson #PHS175-120, CNC Press Brake, 120" Overall, 102" Between Housings, 1997
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Model: PHS175-120
Year: 1997
175 Ton X 10’ Press Brake with PC800 CNC Controls, Pedestal Mounted Controls, 4 - Axis Back Gauge, Crowning, Y1 and Y2 Axis, Press Force: 175 Tons, Overall Length of Bed and Ram: 120”, Distance Between Housings: 102”, R - Axis Travel: 8”, X1 - Axis: 20” (Flip-Up Stop Arms for Std. ...more
50 Ton, Press Master #CFP-50, hydraulic, 18" daylight, 12" stroke, 15 HP, 26" x14" tbl, 12" throat, #124249
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-50
50 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-50 BRAND NEW - STILL IN CRATE TONS OF FORCE.(MAX). 50 TONS APPROACH SPEED. 140 IPMPRESS SPEED. 17 IPMRETURN SPEED. 210 IPMTABLE.(LR X FB).″4" X 20"DAYLIGHT. 20.5" MAX. STROKE ADJUSTABLE. 15" THROAT. 13" U-SLOT OPENING. 4"FLOOR TO ...more
50 Ton, Greenerd #HD-50-36-36, 4-post hydraulic press, 20" stroke, 26.7" daylight, 1997
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Greenerd
Model: HD-50-36-36
Year: 1997
MODEL #: HD-50-36-36, SERIAL #: 97T5264, 20" STROKE, 26.75" DAYLIGHT, 36" X 36" BED, 36" X 36" RAM, SPEEDS:, 162 IPM ADVANCE, 16 IPM PRESSING, 169 IPM RETURN, $ 80,000 REPLACEMENT COST NEW, YEAR: 1997, GOOD CONDITION.
Jones #P-225, Vertical Screw Press, 20 HP main drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-225
Jones vertical screw press, model P-225, type 2512, with all wetted parts being stainless steel. Unit 20 HP main drive thru gearbox, frac HP, drive on the shaker discharge assembly and air cylinder to operate the solids discharge cone. Include main screens, backup screens, reinforced poly outer doors / covers and ...more
Brown #SR-3036, inline thermoformer, 30" W x 36" L mold size, 33" sheet width, 2001
Plastimach Corp. | Tappan, NY
Category: Thermoformer Machines
Seller: Plastimach Corp.
Location: Tappan, NY
Mfr: Brown
Model: SR-3036
Year: 2001
Brown Inline Thermoformer, Model: SR-3036, New: 2001, Max Mold Size 30" W x 36" L, Max Sheet Width 33", Top Oven Ceramic Top Oven Zones 6, Bottom Oven Calrod Bottom, Oven Zones, 6 Oven Style, Retractable Clamshell Rail Heaters, Top Platen Stroke 7.375, Bottom Platen Stroke 7.375", Draw Depth 6.0", Platen Drive Air ...more
80 Ton, Amada #TPL80SI, single point, Link drive, gap frame press, 5.1" stroke, 17.9"Shut Height, 2000
Perfection Global | Elk Grove Village, IL
Category: Gap Frame Single Crank Press Machines
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Amada
Model: TPL80SI
Year: 2000
Press Capacity: 88 Short TonsStroke: 5.1"Shut Height: 17.9"Speed: 50 - 95 SPMBolster Area: 40.5" x 23.6"Bolster Thickness: 5.3"Slide Area: 21.7” x 17.7”Slide Adjustment: 3.2"Main Motor: 10 HP, Operator T-Stand w/ Palm ButtonsLink DriveAir CounterbalanceWet Type Clutch & BrakeMotorized Shut Height ...more
Komline Sanderson #GMD-2/0, belt filter pres, 2 meter, 2 HP, DC main, 1 HP, DC feeder
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Press
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Komline Sanderson
Model: GMD-2/0
Komline Sanderson Unimat belt filter press, model GMD-2/0. This unit is a complete, 2 meter wide, stainless steel product contact part belt press. Unit s pneumatically controlled belt tracking device. Press s 1 HP, DC feeder belt drive and 2 HP, DC main press belt drive for vari-speed control. Unit is complete with ...more
650 Ton, Wemhoner, 65" LR x 130", approx. 50" daylight, 37" stroke, oil platens, (2) 40 HP motors, #2024C
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wemhoner
MACHINE #13670487. TYPE #HW05-590-2. OVERALL CLEARANCE L TO R IS APPROX 80.5". APPROX DISTANCE BETWEEN "FRAMES" IS 28". TWO OIL HEATED PLATENS THAT ARE APPROX 4.75" THICK. LOWER PLATEN HAS OPTIONAL CONTINUOUS GEAR/CHAIN DRIVEN FOIL/MYLAR BELT (4.5" DIA ROLLERS). DAYLIGHT BETWEEN THE HEATED PLATENS IS APPROX 50". EIGHT ...more
100 Ton, Press Master #SP-100, 12" stroke, 10 HP, foot pedal, #140367
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Straightening Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: SP-100
100 TON PRESSMASTER HYD. STRAIGHTENING PRESSMODEL SP-100T RATED CAPACITY. 100 TONSPRESSING SPEED. 20 IPMADVANCE SPEED. 20 IPMRETURN SPEED. 26 IPMTABLE WIDTH. 96"TABLE DEPTH. 20"FULL STROKE. 18"THROAT DEPTH. 12"DAYLIGHT. 27"FLOOR TO TABLE.″5"MOTOR. 10 HP STANDARD S: - CYLINDER ...more
300 Ton, Pacific #300PFII Pressformer-II, hydraulic C-frame press, 12" stroke, #76330
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pacific
Model: 300PFII
SERIAL. 8729, MODEL. 300PFII, CAPACITY. 300 TONS, STROKE. 12", OPEN HEIGHT. 24", CLOSED HEIGHT. 12", RAM AREA T SLOTTED. 24" X 24", TABLE AREA. 50" X 30", BOLSTER PLATE T SLOTTED. 50" X 30" X 6-3/4", PASS HEIGHT. 36", THROAT. 16", DISTANCE BETWEEN HOUSINGS. 34", RAM SPEEDS (RAPID). 107 IPM, RAM SPEED NORMAIL PRESS. 48 ...more
Bradbury, 4 notch heads, 28 Unitool punch heads press
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
BRADBURY PRE-PUNCH AND NOTCH PRESS, ADJUSTABLE ENTRY EDGE GUIDES. 12" MAX WIDTH, THREE NOTCHING PRESSES. 7" BETWEEN POST, SIX POST PRESS WITH UNIPUNCH PUNCHES. 28 PUNCHES, DIE SET SIZE. 24" X 40", FLATTNER TWO ROLL. 5"DIA., PASS LINE HEIGHT. 40".
60 Ton, LVD #PPBL 60/25, Hydraulic Press Brake, 80.7" between housing, 8" Throat, 3.9" Stroke, 6.4 HP, 100" OA
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lvd
Model: PPBL
MODEL. PPBL 60/25, CAPACITY. 60-TON, LENGTH OF BEND. 100", DISTANCE BETEEN HOUSING. 80.7", DEPTH OF THROAT. 8", STROKE. 3.9, RAM SPEED ADVANCED. 3.14" IPS, RAM SPEED PRESSING. 0.27" IPS, RAM RETURN SPEED. 3.46" IPS, DUAL ELECTRIC FOOT PEDALS. YES, CNC BACK GAUGE. HURCO 5C, MAIN DRIVE MOTOR. 6.4 HORSEPOWER.
300 Ton, Press Master #HFP-300/MWH, hydraulic h-frame press, 20" stroke, 29" daylight, 14" bore
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: HFP-300/MWH
300 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY.″00 TONSWIDTH BETWEEN UPRIGHTS. 60"DEPTH BETWEEN POSTS. 24-1/4"MAXIMUM RAM TO TABLE.″1.6"STROKE. 20"TABLE TRAVEL.″3"FLOOR TO TABLE TOP. 26-3/4"CYLINDER BORE SIZE. 14"PRESSING ...more
175 Ton, Cincinnati #175CBIIx10, hydraulic press brake, 12' overall, 126" between housing, 10" stroke, 8" throat, 30 HP, 1998
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 175CBIIX10
Year: 1998
SERIAL. 50684, MODEL. 175CBII X 10, YEAR NEW. 1998, OVERALL LENGTH OF BED. 12', DISTANCE BETWEEN HOUSINGS. 10'6", STROKE. 10", MAXIMUM DAYLIGHT. 17", MINIMUM DAYLIGHT. 7", THROAT. 8", ADVANCED SPEED. 132 IPM, PRESSING SPEEDS. 20 IPM, RETRUN SPEED. 190 IPM, BED AND RAM MILLED & DRILL. YES, STROKE DEPTH ...more
Goss & Deleeuw #M600A, Web Press System, (4) Print Unit, (1) Folder, 22.75" cutoff x 38" width, 50 kW press drive, 2004
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Goss & Deleeuw
Model: M600A
Year: 2004
2004 Goss M600A (4) Unit Web Press System + (1) JF44 Folder, 22.75” (578mm) Cutoff x 38” (965mm) Width, - (1) Goss Contiweb SH45-CP Splicer, - (1) Contiweb Infeed with web guide, - (4) Goss M600 A24 Print Units, Full-Autoplate, Duotrol Dampening, CPTRONIC Remote Inking, Oxry Dry Blanket washers, - (1) Main ...more
400 HP 1200 RPM Teco, Frame 5009VP, VSS, vertical solid shaft, weather protected enclosure type 1, 460 Volts, New
ESR Motor Systems LLC | Rock Hill, SC
Category: Vertical Pump Motors
Seller: ESR Motor Systems LLC
Location: Rock Hill, SC
Mfr: Teco
Frame: 5009VP
135 Ton, Cincinnati #135FMIIx8, hydraulic press brake, 8' overall, 78" between housing, 8" stroke, electric foot trip
Fram Fram LLC | Savage, MN
Category: Hydraulic Press Brakes
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Cincinnati
Model: 135FMIIX8
135 TON X 8' CINCINNATI MODEL 135FMX8 HYDRAULIC PRESS BRAKE:, SERIAL: 43643, MODEL: 135FM X 8, CAPACITY: 135 TONS, OVERALL LENGTH OF BED AND RAM: 8', DISTANCE BETWEEN HOUSING: 6'6", STROKE OF RAM: 8", RAM ADVANCE SPEED: 132 IPM, RAM PRESSING SPEED: 18 IPM, RAM RETURN SPEED: 190 IPM, ELECTRIC FOOT TRIP: ...more
60 Ton, Niagara #M60, 6" stroke, 19.25"open height, 32" x 21" bed, Link 5000 - OmniLink II LCD Operator Terminal
Variegate Inc | Huntsville, AL
Category: Gap Frame Single Crank Press Machines
Seller: Variegate Inc
Location: Huntsville, AL
Mfr: Niagara
Model: M60
Niagara M-60:, Capacity: 60 tons, Stroke: 6", Shut Height: 19.25", Slide Adjust: 3.5", Slide: 21" x 16”, Bolster: 32" x 21", SPM: 100, Press Control: Link 5000 – OmniLink II LCD Operator Terminal, Manufacturing Date: ? Serial Number: 52376, Ready for inspection, Video Link: Coming Soon.
Quick #N-P50-04-08-EL-1PL-F-44-R-1Z, pneumatic w/fixed opening, 4' x 8' platen, 50 psi @ 100 psi supply, (18) 12.8" diameter air pods w/5.9" stroke, 44" opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: N-P50-04-08-EL-1PL-F-44-R-1Z
Year: 2026
QUICK N-P50 Fixed Daylight Opening Air Pod PressThis Pod Press can produce a maximum 50 PSI platen pressure over the entire surface at 100 PSI supply air pressure. Press has a fixed vertical daylight opening of 44". The (18) 12.8" max. diameter air pods have 5.9" stroke.Material conveyance is via automatically ...more
