Arlington Machinery
Lake Zurich, IL 60047
Platinum Level Dealer
Surplus Record Dealer Since 1998
Contact
Chris / Garrett
About
Arlington Plastics Machinery sells plastics machinery, buys plastics machinery and offers appraisals and liquidations of equipment.Products & Services
- Chemical, Petroleum & Gas Processing Equipment
- Dryers
- Filters
- Injection Molding Machinery
- Mixers
- Plastic Equipment
- Pumps
- Rubber Machinery
Associations & Affiliations
889 listings in 133 categories
3-Dimensional (3-D Printing) Printers
1 Result
Domino #A420I, inkjet printer, 100/240 V., 4 amps, S/N AST000104604
Category: 3-Dimensional (3-D Printing) Printers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Domino
Model: A420I
Domino Inkjet Printer Model A420I S/N AST000104604 100-240V/50-60Hz/4A.
Bosch Rexroth Bosch #MKD112B-024-GG0-BN, permanent magnet servo motor, 1999
Category: AC Servo Motors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bosch
Frame: MKD112B-024-GG0-BN
Year: 1999
Used Bosch Rexroth Indramat Model MKD112B 024 GG0 BN Permanent Magnet Servo Motor Rated Torque: 28.0 Nm Max Torque: 42.0 Nm Rated Amps: 21.9A, Max 32.9 A 4500 RPM Max Torque Constant Km 1.43 Nm A Back EMF Constant: 130 Volts Per 1,000 RPM Cooling Surface Cooled Insulation Class F Protection IP65 Weight: 77 LBS Part ...more
75 HP Baldor, Inverter Drive Motor, Frame 365T, 3600 RPM, 230/460 Volts, 168A/84A
Category: AC Variable Frequency Drives
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Baldor
Model: INVERTER DRIVE MOTOR
Used 75HP Baldor Inverter Drive Motor, 365T Frame 230V/460V - 168A/84A 1780 RPM, 3600 MAX RPM Enclosure: TEFC S/N: 20803 Cat #: M13F 98279832-001 Spec: M14P090X267G1 E-OK.
Arlington Machinery has 9 more
listings in AC Variable Frequency Drives.
Airlock #RV12-6, 1175 RPM, Fr.184C, Control panel, 2 HP Baldor motor
Category: Airlock Valves
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: RV12-6
Used 2 Hp Airlock, Model RV12-6, S/N: 14619 2HP Baldor Motor Driven Through 50:1 Ironman Grove Gear 230/460/3/60, 7.5A/3.5A RPM 1175, 184C Frame With Control Panel Approximate Dimensions: 32" L x 32" W x 34" H.
4" wide x 72" long Conair #MTAC406, Take-Away Conveyor, 20-500 FPM, 42" centerline
Category: Belt Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Used 6' Long Conair Take-Away Conveyor, Model MTAC406 72” L x 4” Wide Conveyor Belt 20 FPM To 500 FPM 1 HP Marathon Motor With Emerson Commander SK Inverter Drive 42” +/- Centerline New In 2015 S/N 156006521209 460/3/60, 3.6 FLA DISCONNECT HANDLE BROKEN Approximate Dimensions: 74” L x ...more
Arlington Machinery has 32 more
listings in Belt Conveyors.
42" wide x 35' long, Bau-Man #194240575/3/60, incline flatbelt in-feed conveyor, 3 HP motor, 2018
Category: Belt Feeder Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bauman
Model: 194240575/3/60
Year: 2018
35' L x 42" Wide Incline Flatbelt In-Feed Conveyor 5 HP Lesson Motor - 575V Start/Stop Control Box With Disconnect Bau-Man Model 194240 Approximate In-Feed Height: 22" to 30" Approximate Discharge Height: 90" to 98" Manual Cranks To Adjust Height 575/3/60, Can Be Sold With New 230/460 Motor S/N 1918717 New In 2018 ...more
26 cu.ft. Carbon Steel Surge Bin, 1/2 HP Allis-Chalmers motor, carolina conveyor 8rvc rot
Category: Bins
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Allis-Chalmers
26 CU. FT. Surge Bin With Rotary Air Lock Carolina Conveyor 8RVC Rotary Air Lock 1/2 HP AC Motor, 208-230/460/3/60 Carbon Steel Construction Approximate Dimensions: 52" L X 42" W x 72" H 4 Units Available.
Arlington Machinery has 6 more
listings in Bins.
Burn Off and Paint Stripping Ovens
1 Result
Sinoheater #VCH67, burnoff vacuum cleaning oven, 2018
Category: Burn Off and Paint Stripping Ovens
Seller: Arlington Machinery
Location: Lake Zurich, IL
Year: 2018
"Used Sinoheater Burnoff Vacuum Cleaning Oven, Model VCH67, New 2018 Oven Dimensions: 700mm x 750mm Heating Power: 12kw Catalytic Unit: 3kw Vacuum Pump: 2.35kw working Temp: 500 c 460 volt Overall Dimension: 2670mm x 1430mm x 1850mm Weight: 1200 kg".
180 GPM, Bell & Gossett #2-1/2/2AB 7-BF, water pump, Series 1510, 25 HP, 3520 RPM US Motors AC motor, 230/460 V.
Category: Centrifugal Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bell & Gossett
Model: 2-1/2/2AB
25 HP Bell & Gossett Water Pump, Series 1510 Model 2-1/2/2AB 7-BF S/N 1673973 180 GPM 3520 RPM US Motors AC Motor, 230/460 CRACKED PECKER HEAD ON MOTOR Approximate Dimension: 48" L x 20" W x 24" H.
Arlington Machinery has 8 more
listings in Centrifugal Pumps.
3 Ton, Conair #EP1A-03, chiller, 2020
Category: Chillers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: EP1A-03
Year: 2020
Used 3 Ton Conair EP1A-03 Chiller 20-65 Degree(Fahrenheit) Setpoint 1.0 HP Pump 11 Gallon Reservoir Tank Auto Water Make-Up New In 2020 460/3/60 S/N: 34319012109 Approximate Dimensions: 40” L x 24” W x 44” H, 430 LBS.
Arlington Machinery has 4 more
listings in Chillers.
Classifiers for Plastic and Rubber
1 Result
48" x 60" Witte, plastic pellet classifier table, 1.5 HP, 36" deck height, size 5 mesh
Category: Classifiers for Plastic and Rubber
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Witte
Used 48" X 60" Witte Plastic Pellet Classifier Table, 1.5 HP 60" Long Deck 48" Wide Screen 36" Deck Height Mesh Size 5 Hole Diameter: 1/4" 22" Discharge Height For Overs 18" Discharge For Fines And Right Size Approximate Vibration Speed: 820 RPM (adjustable 750–900 RPM) 1.5 HP Motor Baldor AC Motor 460/3/60 ...more
CNC Angle Head Cylindrical Grinders
1 Result
11.81" x 23.6" Shigiya #GAE-30-60, CNC angle head grinder, Fanuc 21iT, wheel dresser
Category: CNC Angle Head Cylindrical Grinders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Shigiya
Model: GAE 30-60
Used Shigiya CNC 2-Axis Angle Head Grinder Model: GAE 30-60 Swing Over Table: 300 mm (11.811”) Distance Between Venters: 600 mm (23.622”) Maximum Grinding Diameter: 300 mm (11.811”) Maximum Load Mass Between Centers: 150 kg (330 lbs.) Wheel OD, W, ID: 455 mm x 75 mm x 127 mm Wheel Peripheral Speed: ...more
Hwacheon #Hi-Tech-230BL-YSMC, CNC lathe, 29.5" swing, 10" chuck, 3.1" bar, 15.74" dia., 20.93" lgth, Fanuc Oi-TF, Y-Axis, sub spindle, 2012
Category: CNC Lathes and Turning Centers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hwacheon
Model: HI-TECH 230BL YSMC
Year: 2012
Used Hwacheon Box Way CNC Lathe With Y Axis & SUB SPDL Model: Hi-Tech 230BL YSMC Swing over bed: 29.53” Swing over saddle: 21.26” Max. cutting diameter: 15.74” Std. cutting diameter: 8.58” Max. cutting length: 20.93” Spindle nose main/sub: A2-8/A2-5 RPM: Main/Sub: 3,500/5000 Hole ...more
Arlington Machinery has 3 more
listings in CNC Lathes and Turning Centers.
135 Ton, LVD #150BH10CAD-CNC, cnc press brake, 20WK, 460 V.
Category: CNC Press Brakes
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Lvd
Model: 150BH10CAD-CNC
Used 135 Ton LVD Press Brake, Model 150BH10CAD-CNC 20 KW 460/60/3 Serial Number: 25314.
Arlington Machinery has 1 more
listing in CNC Press Brakes.
Commercial Printing Presses and Equipment
3 Results
Citcronix #C1700-MEK-USA, inkjet printer, 100-240 VAC 3.15A 50/60 Hz, #0413080G
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Citcronix
Model: CI700
Used Citronix Model C1700-MEK-USA Inkjet Printer S/N 0413080G 100-240V/50-60HZ/3.15A.
Arlington Machinery has 2 more
listings in Commercial Printing Presses and Equipment.
Conveyors Vibratory Feeders
2 Results
6" wide x 8' long, Witte feeder, 10.25" x 10.25" infeed, 1 HP Siemens RGZESD, C-3 gearbox, 1.15 SF, 1745 RPM
Category: Conveyors Vibratory Feeders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Witte
Witte Feeder Table 102" Length, 6" Diameter Infeed: 10.25" x 10.25" 1 HP Siemens Motor, Type: RGZESD Gearbox S/N: 7443, Size: C-3 Service Factor: 1.15, 1745 RPM 230-3A/ 460-1.5A S/N: 5683.
Arlington Machinery has 1 more
listing in Conveyors Vibratory Feeders.
Baltimore Aircoil #PT2-0812A-3N1/PT2-1212A-3N1, Cooling Towers, 993 GPM, 6.16 psig, 2012
Category: Cooling Towers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Baltimore Aircoil
Model: PT2-0812A-3N1/PT2-1212A-3N1
Year: 2012
Baltimore Air Cool Model PT2-0812A-3N1 & PT2-1212A-3N1 Cooling Towers S/N U122706319-01 S/N U148100927-01-01 Certified Capacity: 993.00 USGPM of water from 95.00°F to 85.00°F at 78.00°F entering air wet bulb and 6.16 PSIG of total (static lift + spray) pump head from the unit base. New In 2012.
60" ESI #ASC, Servo Cross Cut Saw, 3 HP, 33 Amp., 480 V., 3-Ph., 60 Hz, 2020
Category: Cutoff Saws
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Esi
Model: ASC
Year: 2020
Unused 60" Wide ESI Cross Cut Saw, Model ASC, New in 2020 ASC Servo Saw Capable Of ± 0.020" In-Line Cut Length Accuracy 3HP Saw Motor, Servo Carriage Travel, S/N: 203720187 System Accepts Products Up To 1" High X 60" Wide 4000 RPM 640VDC Rated Current: 5.9A Peak Current: 8.48A Constant Torque: 2.35 ...more
Conair #SCE-3, 3" Servo fly cutter, 3.25 HP, LE-650 controller, Emerson Control Tech EN-214 Servo drive, 2002
Category: Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: SCE-3
Year: 2002
Used 3" Conair Servo Fly Cutter, Model SCE-3 42" +/- 2" Centerline 3.25 HP Motor 230/3/60, 16.1 FLA LE-650 Controller Emerson Control Techniques En-214 Servo Drive w/ Drive Isolation Transformer In: 240/3/60, 15 ARMS Out: 240/3/0-900Hz, 13 ARMS Has Optical Eye Sight For Precision Length Cut S/N: **2373 New In 2002 ...more
Cyclone Separators
1 Result
48" Body Cyclone, 8" inlet, 5" outlet
Category: Cyclone Separators
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 48" Diameter Body Cyclone 8" Inlet 5" Outlet Approximate Overall Dimensions: 86" L x 64" W x 46" H.
DC Motors Electrical, 230-250 Volts
1 Result
150 HP 1750 RPM Sabina, DC motor, 500 Volts, blower & filter
Category: DC Motors Electrical, 230-250 Volts
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Sabina
Used 150 HP Sabina DC Motor, Type: 3211 ATZ Armature: 500V, 243A Field: 150V/300V, 12.4A/6.2A 1750 RPM No. 508060-020/1 Winding: Shunt With Blower & Filter Approximate Dimensions: ,1090 Lbs.
DC Motors Electrical, 475-900 Volts
3 Results
75 HP 1750 RPM Baldor D5075P, Frame 366AT, 500 VA, 150/300 VF
Category: DC Motors Electrical, 475-900 Volts
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Baldor
Frame: 366AT
Used 75 HP DC Baldor Motor, D5075P, 366AT Frame 1750 RPM 500 ARM Volts 150/300 Field Volts Full Load Amps: 123 S/N: N040/0080-SFP E-OK Motor Was Test Run At Arlington - Please See Video Approximate Dimensions: 46" L x 34" W x 18" H 905LBS.
Arlington Machinery has 2 more
listings in DC Motors Electrical, 475-900 Volts.
75 HP Baldor, DC Drive w/Cabinet, 150 Amps, 460 V Input, 500 V output
Category: DC Variable Frequency Drives
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Baldor
Frame: DC DRIVE W/CABINET
Used 75 Hp Baldor DC Drive With Cabinet 150 Amp Disconnect Catalog No BC19H475-CO 460 Input 500 Output 140 Cont Amps.
Arlington Machinery has 2 more
listings in DC Variable Frequency Drives.
12.6" x 36" Bird, 30 HP, 230/460 V., 1775 RPM, decanter centrifuge, #15218J
Category: Decanter Centrifuges
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Andritz
Used Bird 12.6" diameter x 36" long solid bowl decanter centrifuge. Hard surfaced solids discharge ports. 4 1/2" Double lead conveyor with carbide tiles on the beach section and hard surfacing on the center feed zone ports. Liquid phase is discharged by a centripetal pump. Driven by 30HP, 230/460 volt, 1775 rpm motor. ...more
Dehumidifying Hopper Dryers
1 Result
Una-Dyn #UDC-30, Dehumidifying Hopper Dryer & Auto Mini Dryers, Lot of 3, 460 V
Category: Dehumidifying Hopper Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Una-Dyn
Model: UDC30
Lot Of 3 Used Una-Dyn Dryers Dehumidifying Dryer Model UDC30 S/N: 251132.01-01-1104 460V 1PH 60 Cycle 9.7Amps Auto Dryer Model UDC30 S/N: 191383.01-02-0100 230V 1PH 60 Cycles 18.3Amps Auto Dryer Model UDC30 S/N: 184982.01-0799 460V 1PH 60 Cycles 9.7Amps Has Control Panel Approximate Dimensions: 36" L x 26" W x 34" H.
Densifiers
1 Result
Film Densifier, Pneumatic Discharge, 37.5" diameter Cutting Chamber, 200 HP Direct Drive
Category: Densifiers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 200HP Direct Drive Film Densifier 37.5" Diameter Cutting Chamber Pneumatic Discharge Exhaust Blower Currently Installed & Running.
Conair #W2000, Carousel Plus Desiccant Dryer, 2000 lb/hr, 150-375°F temp. range, 30 KW heater, DC-T TouchView, 460 V., 3-Ph., 60 Hz
Category: Desiccant Air Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: W2000
Used 2,000 LB/HR Conair Carousel Plus Dryer System Complete With Four Hoppers, Model W2000, with DC-T TouchView Process Temp Range: 150°F – 375°F -40°F Dewpoint 30 kW Process Heater 460/3/60, 66.8A High-Efficiency Process & Regen Blowers With Aftercooler and Intercooler Package Continuous ...more
Arlington Machinery has 13 more
listings in Desiccant Air Dryers.
Desiccant Compressed Air Dryers
4 Results
46 cfm, Dri-Air #AIRD-x-35PD11, 30 lb. twin hoppers
Category: Desiccant Compressed Air Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Dri-Air
Model: AIRD-X-35PD11
Used 46 CFM Dri-Air Dryer, Model Aird-X-35PD11 With Twin Hoppers 30lb Capacity Hoppers -40 Dewpoint, Microprocessor Control 460/3/60 20 Amp 41" x 64" x 88" Height, Machine Weight 700lbs.
Arlington Machinery has 3 more
listings in Desiccant Compressed Air Dryers.
Dewatering Press
1 Result
Hycor Hypress #HP1020, ram dewatering p, 10" diameter, Stainless Steel
Category: Dewatering Press
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Parkinson Technologies
Model: REVX-E NM LT 40
Used Hycor Hypress Dewatering Press, Model HP1020 Ram style dewatering press 10" Diameter Stainless Steel.
Die Cutting Press Machines
1 Result
Qualitest, Die Cutting Clicker Press, Manual Test Sample, ASTM D 638 Type IV tensile dyes
Category: Die Cutting Press Machines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Qualitest
Qualitest Manual Test Sample Clicker Press Up To 5 Tons Of Cutting Pressure 360 Degree Rotation 12" x 9" Cutting Board Includes ASTM D 638 Type IV Tensile Dies (2) Approximate Dimensions: 14" Lx 12" W x 14" H, 100 LBS.
6" Strand Die With 2.5" Beringer Manual Screen Changer 8 Hole With Replaceable Face
Category: Die Heads
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Beringer
Used 6" Strand Die With 2.5" Beringer Manual Screen Changer 8 Hole With Replaceable Face.
Arlington Machinery has 1 more
listing in Die Heads.
600 KW, Diesel Generator, Modine Heat Exchanger, 1232 hours, 2015
Category: Diesel Generators
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: CHP-1250-2
Year: 2015
Used 600kW Diesel Generator Model CHP-1250-2, LOW HOURS!! 600 KW Output Detroit Diesel 12V-92 Engine With Modine Industrial Heat Exchanger, Model: M-20-EF, Part Number: 1A15449, S/N: 97155-64636-05 Automatic Battery Charger Marathon Electric Controls Marathon Electric DVR 2000E Control Control Panel With Analog Hertz ...more
Arlington Machinery has 1 more
listing in Diesel Generators.
120 KVAR Myron Zucker, Capacitrap Series, 480 Volts, CAT#CIM53120-3H5ESP, 2002
Category: Distribution Switchgear
Seller: Arlington Machinery
Location: Lake Zurich, IL
Year: 2002
Used 120 KVAR Myron Zucker Capacitrap CAT# CIM53120-3H5ESP MZI Control # 34204 480 Volt, 3Ph, 60 hz Nema 12.
Nordson BKG #Hyflex-3/3-Wege, Polymer Diverter Valve, 8800-11000 lbs./hr, HDPE & LDPE, w/ Control & LR-4.3 hydraulic power pack, 2019 (2 available)
Category: Diverter Valves
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nordson
Nordson BKG Hyflex 3/3-Wege Diverter Valve, New In 2019 Designed For HDPE and LDPE 8,800 To 11,000 LBS/HR Throughput Includes Control Panel Includes LR 4.3 Hydraulic Power Pack Available Immediately These Polymer Diverter Valve Was Purchased In 2019 And Never Used In Production 2 Units Available.
48" width x 30" D x 32" H Bramidan #X4830, Vertical Baler, 66000-66200 lbs. Press Force, 43" x 21" Feed Opening, 37" Stroke, 5.4 HP, 2023
Category: Downstroke (Vertical) Balers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bramidan
Model: X4830
Year: 2023
Used 48" Wide Bramidan X4830 Vertical Baler, New In 2023, 5.4 HP Press Force: 66,000–66,200 lbs Bale Size: 48” W × 30” D × 32” H Feed Opening: 43" x 21" Bale Weight: Cardboard: 525–700 lbs, Plastic: Up To 825 lbs 208V/230V/460V - 32A / 25A / 16A S/N: PXE471244 Cycle Time: ...more
Arlington Machinery has 1 more
listing in Downstroke (Vertical) Balers.
Dryers and Coolers
13 Results
Sorema, dewatering & drying system, 44" x 80" centrifugal spin dryer, 2011
Category: Dryers and Coolers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Year: 2011
Used Sorema Dewatering & Drying System Consisting Of: Model DCE-10/20 44" x 80" Centrifugal Spin Dryer, 132 KW, Hydraulic Clamp Shell Style, Rotor RPM 1,485, Rotor Diameter 920mm, Screen Hole Size 2.5mm, 1.5kw Hydraulic Pump For Clam Shell Exhaustion Fan Model VT630 With Cyclone Electric Heat, Dust Collector, With ...more
Arlington Machinery has 12 more
listings in Dryers and Coolers.
Econo Lift #SD48-20, Dumper, 2000 lb. capacity, 36" Size, 48" Tip height, 67" Overall Height, 1 HP, 110 V, 2000
Category: Dumpers and Drum Dumpers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Eagle
Model: SD48-20
Year: 2000
Used 36" ECONO Lift Dumper / Up Ender 2000 LBS. Cap., Model SD48-20, s/n 91251 1 Hp Motor With Control 48" Tip Height 67" Overall Height 48" x 68" x 67".
Arlington Machinery has 2 more
listings in Dumpers and Drum Dumpers.
Dust Collectors
6 Results
Adaptive Engineering & Fabrication(Entek), Filter Receiver, 30" diameter, 60" straight side, 20" cone, 3" in/out, pneu pulse jets, 8" diameter gate
Category: Dust Collectors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Entek
30" Diameter Adaptive Engineering & Fabrication(Entek) Filter Receiver 60" Lone Straight Side, 20" Lone Cone, 3" Inlet 3" Outlet 8" Diameter Pneumatic Slide Gate Pneumatic Pulse Jets Approximate Dimensions: 50" L x 42" W x 124" H.
Arlington Machinery has 5 more
listings in Dust Collectors.
14" x 36" Camtrol #GF-1436, Manual Lathe, 1.5" spindle bore, 140-2000 RPM, 3-Jaw Chuck
Category: Engine Lathes
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: GF-1436
Used Camtrol Model GF-1436 Manual Lathe Swing Over Bed: 14" Distance Between Centers: 36" Swing Over Cross Slide: 8" (Approx.) Spindle Bore: 1.5" (Approx.) Spindle Speeds: 140–2000 RPM (Geared Head) Spindle Nose: D1-4 style (approx.) Threading Range: Inch/Metric via Quick-Change Gearbox Feeds: Power Longitudinal ...more
CDS #CVS121620, 16" width x 12" D, vacuum sizing tank, 2009 (2 available)
Category: Epoxy Lined Tanks
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CVS121620
Year: 2009
Used 20' CDS Vacuum Sizing Tank, 16" Wide x 12" Deep 16" Width, 18 Water Outlets, 18 Vacuum Outlets, 4 Kw Water Ring Vacuum Pump, 3 Hp Process Pump, With Inline Filter, Plate And Frame Heat Exchanger, Comes With Circulation Tank 42" +/- 3" Centerline, On Casters 460/3/60, 20 AMPS New In 2009 S/N: 8607090709 UNIT ...more
Arlington Machinery has 14 more
listings in Epoxy Lined Tanks.
Extruder Line Parts & Accessories
17 Results
CDS #CVC 14-475-LH, Stainless Steel Vacuum Calibration Table, 43" Centerline Height, 2.5' x 14' Table, 7.5 HP, 1725 RPM, 575 V., 3PH
Category: Extruder Line Parts & Accessories
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CVC 14-475 LH
Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH Table Size 2.5 X 14 FT Centerline Height: 43" 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame 3/4 HP Franklin Recirculation Pump and 5 HP Baldor Spray Pump 4 Vacuum ...more
Arlington Machinery has 16 more
listings in Extruder Line Parts & Accessories.
Extruders
6 Results
1" Killion #KLB-100, 24:1 L/D, 3 HP DC motor
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Killion
Model: KLB-100
Used 1.0" Killion Extruder 24:1 L/D Ratio 15:1 Gearbox Ratio, Perfection Gear Gearbox, Rated To 3.10 HP 116 RPM Max. Screw Speed 3 Barrel Zones, 2 Die Zones, Eurotherm 808 Temperature Controllers Temp Panel With Amp Gauge, Tachometer, And Speed Pot NO COOLING Bolt On Barrel Flange With Nozzle 1.5" L x 1.0" W Oval Feed ...more
Arlington Machinery has 5 more
listings in Extruders.
Extruders and Extrusion Lines
111 Results
.7" Leistritz #Micro-18, co-rotating twin screw extruder, 28:1 L/D, Mistic PLC controller, 42" centerline, 1994
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: MICRO-18
Year: 1994
Used 18mm Leistritz Micro-18 Co-Rotating Twin Screw Extruder 500 RPM Screw Speed Approx. 28:1 L/D 6 Barrel Segments, Top Ports In Segments 1, 2, and 6 6 Barrel Zones Controlled By Eurotherm 808 Temperature Controllers Lenze 2.3 KW(3.1HP) 2950 RPM DC Motor Parker 512C DC Drive Mistic PLC Controller 42" Centerline, On ...more
Arlington Machinery has 110 more
listings in Extruders and Extrusion Lines.
Extrusion Dies
16 Results
54" Jwell #JW-P-A2, Sheet Die, 1.5" diameter Back Feed Port, 2020
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jwell
Model: JW-P-A2
Year: 2020
1370MM(53.93") JWELL Sheet Die, Model JW-P-A2 New In 2020 S/N 20976 Approx. 1.5" Diameter Back Feed Port Previously Running PET Approximate Dimensions & Weight: 60" L x 20" W x 12" H, 1,500 LBS.
Arlington Machinery has 15 more
listings in Extrusion Dies.
Big Blower
Category: Fans
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 25 HP Industrial Air Technology Corp. Blower, Model BISW 365-79 CL2/B 360 CW Carbon Steel, 18000 CFM 25 HP Weg AC Motor 230V-480V/3/60, 60.8A - 30.4A 1180 RPM TEFC Enclosure Designed For Clockwise Rotation S/N: 60531-A Approximate Dimensions: 66" L x 58" W x 102" H.
Fluid Bed Dryers
4 Results
Carrier #FCAC1860S, 24" x 120", Stainless Steel, 814 RPM, 2 HP, #13698A
Category: Fluid Bed Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Carrier
Model: FCAC1860S
Year: 1995
Used Carrier Fluid Bed Dryer, Model FCAC1860S, Stainless Steel 24" x 120" 814 RPM 8" Dia. Inlet, 6" Dia. Outlet, 10" Dia. Opening Heating And Cooling Ducts 1/4 Stroke 2 HP Motor S/N: 23370 New in 1995 Vintage Dryer Only, Does Not Include Burner/Heating Element.
Arlington Machinery has 3 more
listings in Fluid Bed Dryers.
CDS #CICO-12-12, Infrared Convection Oven, 12' long, 12" x 12" Cross Section, 8" x 8" Bulk Head Openings, (3) 6" width x 6" diameter Rollers, 575 V
Category: Food Ovens
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
12' Long CDS Infrared Convection Oven 12" x 12" Cross Section 8" x 8" Bulk Head Openings 20 Degrees - 100 Degrees Celsius 66 Degrees - 212 Degrees Fahrenheit 40" Centerline +/- 10", Manual Adjustment (3) 6" Wide X 6" Diameter Rollers 6 Top Blowers 3 Bottom Blowers 1 Entrance Blower Insulated Walls Infrared Heaters ...more
Arlington Machinery has 2 more
listings in Food Ovens.
Forklifts
5 Results
2500 lb. Egemin #EGV, automated forklifts, 66" lift height, 48" fork length, 2017
Category: Forklifts
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: EGV
Year: 2017
2017 EGV Automated Forklifts (6) E'gv Compact Counterbalance Vehicles (12) Flooded Lead Acid Batteries (6) Chargers (utilizing manual battery exchange) (1) Battery Exchange Cart (6) 2-Position Battery Stands (3) I/O Panels (24) Illuminated Push Buttons (2) Lights at door (per ANSI requirements) Navigational ...more
Arlington Machinery has 4 more
listings in Forklifts.
Gearboxes (Gear Reducers - No Driving Unit)
7 Results
1 HP 1750 RPM Winsmith #917MDTS4100LFT, Airlock Rotary Speed Reducer, 208-230/460 V, 2007
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: WINSMITTH 917
Year: 2007
Airlock Rotory. Winsmith 917. Speed Reducer. 1 HP.
Arlington Machinery has 6 more
listings in Gearboxes (Gear Reducers - No Driving Unit).
Granulators
2 Results
16" x 24" Granutec #TFG1624-50, Granulator, 3-Knife, 2 Bed Knives, Pipe/Profile Chute, 50 HP, 1780 RPM, 460 V., 3PH
Category: Granulators
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Granutec
Model: TFG1624-50
Used 16" x 24" Granutec Granulator, Model TFG1624-50, 50hp 3 Knife Open Rotor, 2 Bed Knives Pipe/Profile Chute, Tangential Cutting Chamber, Dual-Feed Setup 50 HP Marathon Globetrotter, Model: SVL326TDB6026AA1 460/3/60, 59A 1780 RPM, Frame 326T, TEFC With 5 HP Blower, WEG W22 Nema Premium Model 00538ET3E184T-W22 ...more
Arlington Machinery has 1 more
listing in Granulators.
Guillotine Shears
2 Results
Herbold #HGS200/200, guillotine, 20 ton downstroke, 2010, #18721A
Category: Guillotine Shears
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Herbold
Model: HGS200/200
Year: 2010
Used 78" Herbold Guillotine Model HGS200/200 2000MM (78.74") Width 2000MM Width (78.74") Stroke 20 Ton Downstroke Force 64" H In-Feed Height HYDRAULIC POWER PACK AND CONTROLS NOT INCLUDED QUOTED AS-IS Approximate Dimensions & Weight: 114" L x 76" W x 284" H 24,000 LBS.
Arlington Machinery has 1 more
listing in Guillotine Shears.
High Intensity Mixers and Blenders
5 Results
100 liter Reliance #VFM-100/VCM-150, mixer, 30 HP AC motor, 150 L. cooler, 2015
Category: High Intensity Mixers and Blenders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Reliance
Year: 2015
100 Liter Reliance Mixer With 150 Liter Cooler, New In 2015, Only 1,500 Hours Reliance VFM 100 Mixer, 30 HP AC Motor, 100 Liter Total Capacity, 80 Liter Working Capacity Reliance VFM 150 Cooler, 7.5 HP, 150 Liter Total Capacity, 90 Liter Working Capacity, 304 Stainless Steel Bowl and Cooling Tool High Intensity Mixer ...more
Arlington Machinery has 4 more
listings in High Intensity Mixers and Blenders.
Hot Oil Systems
1 Result
SMK Metal, 3-zone hot oil unit, 18 KW, 34.5 KW, 34.5 KW, 40 KW cooling rating, (3) 5.36 HP motors, new
Category: Hot Oil Systems
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Smk Metals
3 Zone Hot Oil Unit, 18KW, 34.5KW, 34.5 KW Built By SMK Metal - Austria 40 KW Cooling Rating (3) 4KW(5.36HP) Motors NEW TEMPERATURE CONTROLLERS - NOT YET INSTALLED 230V Control Voltage 50 Amps Voltage Tagged As 400/3/50 - Heaters Run On 230V, Motors Labeled 400/460 - See Photos S/N 0304/P1885 New In 2003 Approximate ...more
2 HP Bucher #M-4504-165, Hydraulic Unit, 1.6 gallon Reservoir capacity, 1500 psi, 3450 RPM, 230-460 V, 2021
Category: Hydraulic Power Units
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Bucher Hydraulics
Year: 2021
Used Bucher Model M-4504-165 Hydraulic Unit 1,500 Max PSI Reservoir Capacity: 1.6 Gal 2 HP Nidec Motor, Model: P63AGY-1311 230-460/3/60, 6A/3A 3450 RPM 56C Frame S/N: 3758679-0004 New In 2021 Approximate Dimensions: 31" L x 9" W x 9" H.
Arlington Machinery has 2 more
listings in Hydraulic Power Units.
35 Ton, Amada #RG35S, press brake, 47.3" table, 14.6" daylight, 4" stroke, 7.9" throat, 3 HP, NC9-EX Control
Category: Hydraulic Press Brakes
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Amada
Model: RG35S
Used 35 Ton Amada Press Brake, Model RG35S NC9-EX Controller Serial Number: 503534.
Engel, Viper-40, gentry robot, guarding, 480Y/277 V., 3-phase, 2015
Category: Industrial Robots
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Engel
Model: VIPER-40
Year: 2015
Used Engel Viper 40 Gantry Robot with Guarding 480Y/277 3 Phase S/N: 204025 NEW In 2015.
Arlington Machinery has 2 more
listings in Industrial Robots.
Industrial Woodworking Upcut Saw
2 Results
CDS #CSTMS 4.5-D, Double Miter Upcut Saw, 26" table travel, 2 x 12" carbide blades, 2 HP, 10-18 FPM, 460 V.
Category: Industrial Woodworking Upcut Saw
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CSTMS 4.5-D
Used CDS Upcut Saw, Model CSTMS 4.5-8 Servo Travelling Miter Saw 26" Table Travel (2) 12" Carbide Tipped Saw Blades with (2) 2 Hp AC Motors +-.020" Length Accuracy 2 Blades Capable of Cutting Opposing 45 Degree Angles (One Blade At 45 Degrees and One Blade At 135) At Fixed Angles 10-18 FPM Line Speed 460 Volt S/N: ...more
Arlington Machinery has 1 more
listing in Industrial Woodworking Upcut Saw.
50 HP 1765 RPM Marathon Blue Max #U4VJ326THFPA8038ABL Motor, Frame 326TC, 60 Amps, 460 Volts, 2019
Category: Inverter Duty Motors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Marathon
Frame: 326TC
Year: 2019
Used 50 HP Marathon Model 4VJ326THFPA8038ABL Blue Max Motor 1765 RPM 460/3/60, 60A Frame: 326TC C-Face Flange, Can Be Directly Mounted S/N: TBD New in 2019 Approximate Dimensions: 42" L x 22" W x 20" H 686LBS.
Arlington Machinery has 2 more
listings in Inverter Duty Motors.
Lab Balancers & Scales
1 Result
Shimazu #AUX220, analytical balance, 220 g capacity, built in clock & calibration
Category: Lab Balancers & Scales
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Shimadzu
Model: AUX220
Year: 2003
Shimadu Analytical Balance, Model AUX220 220 g Weight Capacity, Minimum Display Unit: 0.1mg Repeat Ability: 0.1mg Linearity: 0.2mg Response Time: 3 Sec Operating Temp Range: 40-100 Deg F Sensitivity Range: +2 ppm/F (50-86 F) Pan Size 80mm Input/Output Terminal: RS232 I/F Built In Calibration, Built in Clock Has Analog ...more
Prodex, Henschel #JSS-2, high intensity lab mixer, 3 HP, 9 liter, Tele-Tru analog probe style thermometer
Category: Lab Mixers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Prodex
Model: JSS-2
Used 9 Liter Prodex/Henschel JSS 2 High Intensity Lab Mixer, 3 HP 6 Liter Working Capacity 3 HP AEG High Speed, Low Speed Motor Mixing Tool Speed: High - 3800 RPM, Low - 1800 RPM Tele-Tru Analog Probe Style Thermometer 220V / 440V/3/60, 7.8A / 3.9A S/N: 800104 Approximate Dimensions: 40" W x 30" D x 54" H, On Casters ...more
Thermo Scientific #Heratherm-OMH60, Oven, Size 4, 2.12 cu.ft. Chamber, 626°F max Temp., 1.44 kW, 120 V, 2015
Category: Laboratory Type Ovens
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Thermo Scientific
Model: HERATHERM OMH60
Year: 2015
Used 1.44 KW Heratherm Oven Thermo Scientific Model OMH60 Size 4, FPM 7316 Type: Heratherm OMH60 Max Temp: 626 F Chamber Size: 2.12 Cu.Ft. (60 Liters) 120/1/60, 12A S/N 41833570 New In 2015 Microprocessor Controls w/ Digital Screen Readout Forced Air Convection, SS304 Interior, Over-Temp Protection Compact Benchtop ...more
Material Handling Equipment
1 Result
Dual Supersac Unloading Station
Category: Material Handling Equipment
Seller: Arlington Machinery
Location: Lake Zurich, IL
Dual Supersac Unloading Station Chain Hoist For Each Station Hopper Unloader Operator Control Panel NO LONGER INSTALLED Includes Cranes.
Material Lifts - (Drum, Pallet, Vacuum)
1 Result
8000 lb. Yale #MPE080IFN24T2890, Pallet Jack, Double Pallet, 8' long Forks, 24 V, 775 hours
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Yale
Model: MPE080IFN24T2890
Used 8000 LBS Yale Electric Pallet Jack, Double Pallet Length 24 Volt 8' Long Forks Truck Weight With Battery 775 Hours 2950LBS Truck Weight Without Battery 1450 LBS S/N B890N0Z922J.
Melt Pumps
13 Results
LCI #ES-56/56, Melt Pump, 860 lb./hr. capacity, 60" Centerline, 20 HP, 1780 RPM, 230/460 V, 1998
Category: Melt Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maag
Model: ES 56/56
Year: 1998
860 LB/HR LCI ES 56/56 Melt Pump, 20 HP AC Motor S/N 1995 New In 1998 Includes Second ES 56/56 Gear Pump S/N 1996 60" Centerline 20 HP Marathon Black Max Motor, 1780 RPM, 230/460 Does Not Include Control Panel Or Drive Removed From 3.5" Davis Standard Extruder Approximate Dimensions: 68" L x 52" W x 68" H.
Arlington Machinery has 12 more
listings in Melt Pumps.
Foremost #SEP-GA-1, metal detector, 110 V., 4" inlet/outlet, mounted on stand
Category: Metal Detectors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Foremost
Model: SEP-GA-1
Year: 2012
Used Foremost SEP-GA-1 Metal Detector 4" Inlet/Outlets 110 V S/N: 42274 Mounted On Stand Approximate Dimensions: 32" L x 28" W x 56" H.
Arlington Machinery has 2 more
listings in Metal Detectors.
Misc. Laboratory and Research Equipment
7 Results
CDS #CVC-14-475-LH, 14' Stainless Steel vacuum calibration table
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CVC 14-475 LH
Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH, Table Size 2.5 X 14 FT Centerline Height: 43" 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame 3/4 HP Franklin Recirculation Pump and 5 HP Baldor Spray Pump 4 Vacuum ...more
Arlington Machinery has 6 more
listings in Misc. Laboratory and Research Equipment.
American Vacuum Company, vacuum conveyor, 7.5 HP
Category: Miscellaneous Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Used 7.5Hp American Vacuum Company Vacuum Conveyor 460 Volt 11.6 Amp With Controller.
Arlington Machinery has 20 more
listings in Miscellaneous Conveyors.
Miscellaneous Filters
3 Results
Assorted Lot of AEC Filters w/Housing, 2" Inlet/Outlet, (6) Filter Elements
Category: Miscellaneous Filters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Lot Contains: (1) AEC Cartridge-Style Central Filter Housing, XFC Series, S/N: 49F0026 (1) AEC Cartridge-Style Central Vacuum Safety Filter, AFC-S Series, S/N: 38A0280, 2" Inlet/Outlet (1) AEC Cartridge-Style, Model: WX-7515-ST, S/N: 47H0565 (6) Filter Elements Approximate Overall Shipping Dimensions: 48" L x 48" W x ...more
Arlington Machinery has 2 more
listings in Miscellaneous Filters.
Miscellaneous Furnaces, Ovens and Parts
1 Result
Furnace Cleaning System, ECON Pyrolysis EPO 100, 210x260mm charging chamber, 725mm charging height, 2020
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Econ
Model: FURNACE CLEANING SYSTEM
Year: 2020
Used ECON Pyrolysis Furnace Cleaning System EPO 100 Charging Chamber: 210 mm x 260 mm Charging Height: 725 mm Load Capacity: 100 kg Cycle Time: Approx. 8 – 10 Hrs (Including Cooling Time) Suction Volume: 40m³/h Activated Carbon Absorber (Approx.): 25kg (60 Liter Barrel) Max Temp: 450°C New In 2020 ...more
Miscellaneous Plastic and Rubber Equipment
33 Results
Adescor #ECP054, Pipe Coiler, Previously Coils 4" diameter Pipe, 2 HP, 2.7/15 Amps, 600 V, 2018
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Adescor
Model: ECP054
Year: 2018
Used Adescor Pipe Coil Wrapper, Model ECP054, New in 2018 Delta Touchscreen Controller 600/60/3- 15 Amps.
Arlington Machinery has 32 more
listings in Miscellaneous Plastic and Rubber Equipment.
Mixers-blenders and Agitators for Rubber or Plastic
37 Results
Accu-Rate, dry material feeder, 6" dia. auger, serial #29721-01A-1202
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Accurate
Accu-Rate Dry Material Feeder 6" Diameter Auger S/N 29721-01A-1202 Approximate Dimensions: 44" L x 36" W x 40" H.
Arlington Machinery has 36 more
listings in Mixers-blenders and Agitators for Rubber or Plastic.
Nutsche Filters
1 Result
FilterTech #RGF2-240, gravity filter, 25" wide, 1/4 HP Marathon motor & Nord gearbox
Category: Nutsche Filters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Filtertech
Model: RGF2-240
Used 25" Wide FilterTech RGF Gravity Filter Model RGF2-240 S/N 13C3174-2 1/4 HP Marathon Motor And Nord Gearbox Approximate Dimensions: 84" L x 50" W x 76" H.
Skid Mount Oil Pump System, Nemo Cavity pumps, 100 GPM, 90 psi, Nord gearbox 2.5:1, 230/460 V., 2019-2020
Category: Oil Transfer Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: NM045BY01L07V1
Used 10 HP Netzsch Nemo Cavity Pump, Model 13MP/4 CUSTW Flowrate: 33-100 GPM, Pressure 30-90 PSI, Pressure Temp: 70 F 190-680 RPM 460/3/60, 13.4A Model NM045BY01L07V1 S/N A191996 Nord Gearbox Model 571.1F-132MP/4 CUSTW 2.50:1 Gear Ratio New in 2019 Approximate Dimensions: 80" L x 16" W x 18" H.
Optimizing Cross-Cut Saws
1 Result
RDN #C420, Cross Cut Saw, 14" diameter blade, 42" centerline, product & length counter, 460 V., 2006
Category: Optimizing Cross-Cut Saws
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rdn
Model: C420
Year: 2006
Used 4" x 20" RDN Cross Cut Saw, Model C420 14" Blade Diameter, 42" Center line Height, With Leveling Screws Product Counter, Length Counter 460/3/60 S/N: 51447 New In 2006 Approximate Dimensions: 60" L x 55" W x 75" H.
Overhead-Bridge Cranes
1 Result
3 Ton, Top Running Bridge Crane, Freestanding, Motorized, 38' Runway, 20' width Bridge, 20' High, 20' Lift Chain Hoist, 17 FPM, 2008
Category: Overhead-Bridge Cranes
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Crane
Year: 2008
Used 3 Ton Top Running Bridge Crane - Freestanding - Motorized 38’ Runway 20’ Wide Bridge(19’ Operating Width) 20’ High 3 Ton Harrington Model NER030C Chain Hoist, S/N 00019211 20’ Lift 17 FPM Lift Speed 16’ Cord Length 110V Control Pendant Harrington 3 Ton Motorized Tolley, 40 ...more
Paddle Mixers and Blenders
8 Results
30 cu.ft. Marion #3020, Stainless Steel jacketed paddle blender, 125 psi @ 350°F, 20 HP AC motor, 72" infeed height, 16" discharge height
Category: Paddle Mixers and Blenders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Marion
Used 30 CU. FT. Marion 3020 Paddle Blender 304 Stainless Steel Vessel PADDLES ARE STAINLESS - SHAFT AND ARMS ARE CARBON STEEL Jacketed - Rated To 125 PSI @ 350 Degrees Fahrenheit 8" Diameter Center Discharge Offset To One Side Of Blender Pneumatic Slide Gate On Discharge Belt Driven Through Dodge 25.13:1 Gearbox 20 HP ...more
Arlington Machinery has 7 more
listings in Paddle Mixers and Blenders.
Paper and Corrugated Materials Balers
2 Results
60" International #IVB606HF, vertical baler, 10 HP, 480 V., 1998
Category: Paper and Corrugated Materials Balers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ips
Model: IVB606HF
Year: 1998
Used 60" Wide International Vertical Baler Model IVB606HF, 10 HP 480 Volt S/N:10710 New In1998 Overall Dimensions: 80" L x 45" W x 152" H Self-Eject Bale Hook System Unit Has Been Tested At Arlington, Currently Quoted AS-IS.
Arlington Machinery has 1 more
listing in Paper and Corrugated Materials Balers.
Paper and Pulp Mill Machinery
8 Results
Recycling Equipment Inc. #12088S, 120" W x 88" H roll splitter, 20 HP hydraulic power pack, (2) 7" cylinders, new
Category: Paper and Pulp Mill Machinery
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Recycling
Model: 12088S
New 120" W X 88" H Recycling Equipment Inc. Roll Splitter, Model 12088S Hydraulic Guillotine Powered via 20HP Hydraulic Power Pack Travels on (2) 7" Cylinders Largest Roll Size: 119" x 87" Lead Time: Approx. 10-14 Weeks.
Arlington Machinery has 7 more
listings in Paper and Pulp Mill Machinery.
Allegheny Bradford, Shredder & Baler System, 20" Cutting Assembly, 72" L x 30" width x 40" H Bale Size, 1500 lb. Box Dumper Lift capacity, 40/25 HP, 2021
Category: Paper Shredders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Allegheny Bradford
Year: 2021
Allegheny Shredder & Baler System, New In 2021 System Includes The Following: Allegheny HLS-84836 Box Dumper With Guarding, 48" W, 2 HP, 1,500 LB Lifting Capacity, 101" L x 66" W x 101" H, 2,550 LBS Allegheny 20-350C Strip-Cut Shredder, 20" Cutting Assembly, 40 Horsepower, 1/2" Shred Width, 10.75" Diameter,107"Lx ...more
Pharmaceutical Dedusters
1 Result
Pelletron #P10, Deduster w/Dust Beater, 1000 lb./hr., 134" total height on stand, 230 V
Category: Pharmaceutical Dedusters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Pelletron
Model: P10
Used Pelletron Model P10 Deduster and Conair Dust Beater With Stand And Collection Drum 1,000 lbs/hr 230 Volt S/N DE11-2158003 Total Height On Stand 134" Stand Height 69" Floor Dimensions 76" x 68".
Plastic and Rubber Hoppers
8 Results
AEC #WH30, Insulated Drying Hopper, 1 cu.ft. capacity, 2021
Category: Plastic and Rubber Hoppers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: WH30
Year: 2021
1 CU/FT AEC WH30 Insulated Drying Hopper Unused, New In 2021 Model WH30, S/N 51E0054 Approximate Weight And Dimensions: 22" L x 18" W x 28" H, 30 LBS.
Arlington Machinery has 7 more
listings in Plastic and Rubber Hoppers.
Plastic Blow Molders
3 Results
Graham, Mini Hercules Accumulator Head Blow Molder, Dual Head, 2.5 lb. capacity, 75 mm Extruder, 14" Head Centers, 124 HP, 480 V, 31938 hours, 2017
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Graham
Year: 2017
2.5 LB Graham Mini Hercules, New In 2017 75 MM Extruder, Air-Cooled Barrel, 124 HP Motor 2.5 LB Shot Size Dual Head 14” Head Centers 1” To 6” Tooling Size 40” x 40” Tie Bar Spacing 480/3/60 260 FLA 31,938 Hours New In 2017 Approximate Dimensions: 186” L x 138” W x 180” H.
Arlington Machinery has 2 more
listings in Plastic Blow Molders.
Plastic Granulators and Pelletizer Machines
125 Results
1.5" MAAG / Sheer Bay #SGS-50E, strand pelletizer, 8 strands, 20 knife carbide inlay helical style rotor, 46" infeed height, Allen Bradley VFD
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cf Scheer
Model: SGS-50E
Used 1.5" Wide MAAG/Sheer Bay Strand Pelletizer SGS-50E, 2 HP 8 Strands, 20 Knife Carbide Inlay Helical Style Rotor 46" Infeed Height 2" x 2" Discharge, 32.75" Clearance 275 LBS/HR Throughput Dependent Upon Material Per Manufacturer 1 Metal, 1 Rubber Pull Roll 2 HP Reliance Electric Duty Master AC Motor, Frame FD145T ...more
Arlington Machinery has 124 more
listings in Plastic Granulators and Pelletizer Machines.
Plastic Shredders
6 Results
Republic #RM52-100-S-15-2-80-D, single shaft shredder, 100 HP, 52" split A part, 110" infeed height, Allen Bradley Micro Logix 1500 PLC
Category: Plastic Shredders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Republic-Lagun
Model: RM52-100-S-15-2-80-D
Used 52" Split A Part Republic Single Shaft Shredder, Model RM52-100-S-15-2-80-D, 100hp Weg 100hp AC Super Duty Inverter Duty Motor, 1775rpm 110" Infeed Height 230/460 Volt - 228/114 Amp 7.5hp Hydraulic Power Pack, 230/460 Volt, 18.6/9.29 Amp Republic Control Panel with Automation Direct Touch Screen Control Weg ...more
Arlington Machinery has 5 more
listings in Plastic Shredders.
Plate and Frame Filter Presses
1 Result
30" x 30" Duriron, filter press, 92 plates, 212" max opening, 2 HP
Category: Plate and Frame Filter Presses
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Duriron
Duriron Filter Press 92 Plates 30" x 30", Max Opening 212" With 2 Hp Hydraulic Pump Hydraulic Chain Drive S.O. # D00685 Overall Length 34'.
Una-Dyn #10HP-HP, PowerMax HP Pump, w/2" Hopper, 2" Inlet, 230 CFM, 10 HP, 460 V
Category: Positive Displacement Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Una-Dyn
Model: 10HP-HP
Used 230 CFM Una-Dyn Powermax HP Pump, w/ 2" Hopper, 10 HP Airflow: 105 CFM Vacuum: 10 (In. HG) Includes DustMaster Receiver (P/N: DMABA24) M/O: 301890.03 2" Inlet, 24VDC Discharge Valve Stainless Steel, NEMA-Rated Control Enclosure 460/3/60, 6A S/N: 32515VU22 Approximate Dimensions: 44" x 26" x 52", 525 Lbs.
Arlington Machinery has 8 more
listings in Positive Displacement Pumps.
Power Squaring Shears (Gauge)
2 Results
14 gauge x 4' Famco #E12400, shear, 30" H table, 1.5 HP
Category: Power Squaring Shears (Gauge)
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Famco
Model: E12400
Used 48" Famco Shear, 14 Gauge Model E12400, S/N S-170124 30" Table Height 1.5 HP Motor, Control Panel Approximate Dimensions: 110" L x 30" W x 52" H.
Arlington Machinery has 1 more
listing in Power Squaring Shears (Gauge).
Processors, Producers, Compounders
1 Result
Coperion Mega, compounder w/ 11 barrel sections, 900 RPM, 2.3" screw, 34:1 L/D, 500 HP, w/ 450 GPM water system, Gala spin dryer & #MUP7 cutter, 2002
Category: Processors, Producers, Compounders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Coperion
Model: MUP7
Year: 2002
Used 58MM Coperion ZSK-58 Mega Compounder, 900 RPM Screw Speed, 34:1 L/D Flender Gearbox Directly Coupled To 500 HP DC Motor & Drive HMI Touchscreen Interface 500 HP GE DC Motor With GE DV-300 Drive 10 Barrel Sections, Electrically Heated, Water Cooled Barrel, Side Feeder Port In Section 4, Vented In Section 4 Prior ...more
Netzsch Nemo #NM045BY01L07V1, cavity pump, 10 HP, 33-100 GPM, 30-90 psi, 70°F, 2019
Category: Progressive Cavity Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Netzsch
Year: 2019
Used 10 HP Netzsch Nemo Cavity Pump, Model 13MP/4 CUSTW Flowrate: 33-100 GPM, Pressure 30-90 PSI, Pressure Temp: 70 F 190-680 RPM 460/3/60, 13.4A Model NM045BY01L07V1 S/N A191996 Nord Gearbox Model 571.1F-132MP/4 CUSTW 2.50:1 Gear Ratio New in 2019 Approximate Dimensions: 80" L x 16" W x 18" H.
Pullers and Cutters
35 Results
AMS #4.5x30, 4.5" x 30" puller/cutter co, R to L, Red Lion touchscreen Control panel, 2022
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ams
Model: 4.5X30
Year: 2022
Used 4.5" x 30" AMS Puller/Cutter Combo, Model 4.5x30, New in 2022 1.5" Fly Cutter Bushing, 2KW Yaskawa AC Servo Fly Cutter Motor 4.5" x 30" Two Belt Puller, (2) 2HP Direct Drive Belt Motors (2) Cone Drive Gearboxes, 40:1 GB Ratio Red Lion Touchscreen Control Panel Right to Left Operation 240/3/60 - 20 Amps.
Arlington Machinery has 34 more
listings in Pullers and Cutters.
Pulverizers and Hammermills
3 Results
American #TRS-24x25-EG-HD-DE, 24" x 25" pulverizer gun blaster, 40 HP, rebuilt 2024
Category: Pulverizers and Hammermills
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: TRS-24X25-EG-HD-DE
Used 24" x 25" American Pulverizer Dual Shaft Shredder, Gun Blaster, 40 HP Rebuilt By The Factory In 2024, 100 Hours Since Rebuild 1 3/8" Wide Cutters Model TRS-24x25-EG-HD-DE (2) 20 HP Motors Driven Through Right Angle Gearboxes Approximate Dimensions: Approximate Weight: 7,700 LBS.
Arlington Machinery has 2 more
listings in Pulverizers and Hammermills.
Maag #EX110/110-BF, thermoplastics melt pump, 800-2000 lbs/hr, 40 HP GE DC motor, 1750/2100 RPM
Category: Pumps - Miscellaneous
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maag
Model: EX110/110-BF
Used Maag EX110/110-BF Thermoplastics Melt Pump 40hp GE DC Motor, 1750/2100 rpm Motor Capacity: 800-2000 lbs/hr Viscosity: 1000-5000 PAS Temp: 200c Serial Number: 50034856-10 Screen Changer in photos not included.
Arlington Machinery has 2 more
listings in Pumps - Miscellaneous.
Reactors
1 Result
50 gallon Letsche, Reactor, 304 Stainless Steel, 70 psi @ 320°F, 0.105" shell thickness, 1984
Category: Reactors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Year: 1984
Used 188 Liter Letsche Reactor 304 Stainless Steel S/N 1035 / 5782-24 70 PSIG Working Pressure.105 Shell Thickness SEE PHOTO OF NAMEPLATE FOR MORE.
Recycling Equipment
5 Results
Friction Washer, Tecnofer #CD720X1500, 33 HP, 480 V., in feed auger 2 HP
Category: Recycling Equipment
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Tecnofer
Model: CD720X1500
Used Tecnofer CD720X1500 Friction Washer 25KW(33HP) AC Motor, 480 V, 43 AMPS, Does Not Include Starter In-Feed Auger Powered By 2 HP AC Motor Approximate Dimensions: TBD.
Arlington Machinery has 4 more
listings in Recycling Equipment.
Refrigerated Compressed Air Dryers
4 Results
22 cfm, Conair #SL50, SlimLine Compressed Air Dryer, 16-50 lb./hr. capacity, 100-350 F, 115 V
Category: Refrigerated Compressed Air Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: SL50
Used Conair SlimLine Dryer with Hopper, Model SL50 16-50 LBS/HR 100-350 F Temperature 22.00 CFM Comes With Loader Does Not Include Optional Membrane Required If Plant Air Isn't Dried To -40 Dew Point Approximate Dimensions: 30" L x 18" W x 65" H.
Arlington Machinery has 3 more
listings in Refrigerated Compressed Air Dryers.
Ribbon Mixers and Blenders
5 Results
16 cu.ft. Lowe Industries #C-16, Platform Double Ribbon Blender, 3" diameter Mixing Shaft, 1.5" width x 0.5" thick / 2" width x 0.25" thick Stainless Steel Ribbons, 6" diameter Bottom Discharge, 7.5 HP, 1995
Category: Ribbon Mixers and Blenders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Lowe Industries
Year: 1995
Used 16 CU/FT Stainless Steel Lowe C-16 Platform Double Ribbon Blender, 7.5 HP 7.5 HP SEW Eurodrive AC Motor, TEFC 460/3/60, 9.6A Driven Through A SEW Eurodrive Reducer Gear Ratio: 19.33:1 Input: 1730 RPM Output: 89 RPM Torque: 442 LB/FT 12" Diameter Charge Port w/ Pneumatic Butterfly Valve 12" Diameter Open Vent 2.5" ...more
Arlington Machinery has 4 more
listings in Ribbon Mixers and Blenders.
Rotary Mixers and Blenders
1 Result
270 cu.ft. Con-Tech, rotary blender, 50 HP, skid mounted, 2019
Category: Rotary Mixers and Blenders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Con-Tech
Year: 2019
Used 10 Cu. Yd (270 Cu.Ft) Skid Mounted Con-Tech Rotary Blender, 50 HP 50 HP Motor Feeds A Geneva Hydraulic Pump Self Cleaning Fin Spiral Design Comes With Electrical Control Box Motor Run, Start, Motor Stop, Stop, Hand/OFF/Auto Switch 50 HP Marathon Motors BlueMax, Model UVJ326THFS8028EUL, 326T Frame, S/N: ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
140 cfm, 150 psig, Ingersoll-Rand #IRN40H-TAS, air compressor, 5300 RPM, 380-480 V., 3-phase, 2010
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ingersoll-Rand
Model: IRN40H-TAS
Year: 2010
Used 40 HP Ingersoll Rand Air Compressor, Model IRN40H-TAS 5300 RPM 140 CFM 150 PSIG 380-480 Volt 60HZ, 3 Phase 66.6 Amps New In 2010 92,000 Hours S/N: BN1936U10216 Approximate Dimensions: 76" L x 32" W x 82" H.
Rotary Valves (Airlock Valves)
5 Results
7" Premier Pneumatics, Rotary Airlock, 10.5" Flange, 1/2 HP
Category: Rotary Valves (Airlock Valves)
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Premier Pneumatics
Used 7.5" Premier Pneumatics Rotary Airlock, 7.5" Inlet, 7.5" Outlet, 10.5" Flange, 1/2 HP Motor, Machine Dimensions 26" L x 21" W x 18" L 280 LBS.
Arlington Machinery has 4 more
listings in Rotary Valves (Airlock Valves).
Scissor Lifts
1 Result
2500 lb. Autoquip #Series-35, automatic scissor lift w/ conveyor, 1.5 HP
Category: Scissor Lifts
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Autoquip
Model: SERIES-35
Used 2500 LB Capacity Autoquip Series 35, 60S25 Auto Scissor Lift, w/ Conveyor, 1.5 HP Conveyor Is Currently Welded On, Can Be Removed 1.5 HP Autoquip, Model C42T34NZ1F 3450 RPM Driven Into a 50:1 Ratio Speed Reducer Travel: 60" Min/Max Height: 8"/68" Platform Size Min: 32" x 87" Platform Size Max: 60" x 120" Base ...more
Scrap Crushers
1 Result
Headlight Crusher, 2-Drum, 21' L x 20" width Infeed & 30' L x 18" width Discharge Conveyors, w/Cross Belt Magnet, 20 HP
Category: Scrap Crushers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Consignment Herbold 2 Drums, 20 HP AC Motor 21' L x 20" Wide Flatbelt In-Feed Conveyor 30' L x 18" Wide Flatbelt Discharge Conveyor Tuffman CBS-30 Cross Belt Magnet On Discharge Conveyor, 3/4 HP Motor, Ceramic8 Magnet Assembly Does Not Include Drives Or Motor Starters For Crusher Or Conveyors.
Screens and Sifters
11 Results
6" Berlyn #BCM-6000, screen changer, hydraulic power pack w/ accumulator
Category: Screens and Sifters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Berlyn
Model: BCM-6000
6" Berlyn Screen Changer With Hydraulic Power Pack Model BCM-6000 S/N 085D535 Hydraulic Power Pack With Accumulator Approximate Shipping Dimensions: 70" L x 48" W x 60" H.
Arlington Machinery has 10 more
listings in Screens and Sifters.
6" diameter x 4.6' long, Dual screw feeder, dresser, gearbox 1/2 HP Baldor AC motor, s/n #3388
Category: Screw Type Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: DUAL SCREW FEEDER
54" L x 6" Dia. Dual Screw Feeder S/N 3388 Dresser Gearbox 1/2 HP Baldor AC Motor, 208-230/460, Three Phase Approximate Dimensions: 72" L x 30" W x 22" H.
Arlington Machinery has 6 more
listings in Screw Type Conveyors.
Screw Type Injection Molding Machine
10 Results
30 Ton, 0.7 oz., Niigata #MD35 SIV, Vertical Rotary Injection Molding Machine, 18 mm screw, 11.8" x 11.8" x plate, 37" rotary diameter, 2003
Category: Screw Type Injection Molding Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Niigata
Model: MD35 SIV
Year: 2003
Used 35 Ton Niigata Vertical Rotary Injection Molding Machine, Model MDVR-35SIV, 0.70 Oz, New In 2003 Voltage: 220V S/N: 95071R Machine Dimensions: 2020mm x1270mm x 2900mm Machine Weight: 6,000 Lbs.
Arlington Machinery has 9 more
listings in Screw Type Injection Molding Machine.
Shredders
26 Results
Cumberland / Zerma #ZXS2000, 78" single shaft shredder, 220 HP, 78.8" x 99.06" opening, 2011
Category: Shredders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: ZXS2000
Year: 2011
Used Cumberland/Zerma Single Shaft Shredder, Model ZXS2000 Make Offer! 78.8" x 99.06" Opening, 29.5" Rotor Diameter 94 Knives 2- 90kw(120HP) Motors, Belt Driven Through Gearboxes 46 RPM Rotor Speed, Belt Driven, 2 Speed Swing Arm Ram With 11KW(15 HP) Hydraulic Unit Machine Weight- 20,200 kg S/N C110615 Includes Power ...more
Arlington Machinery has 25 more
listings in Shredders.
MSS Optical / Infrared Sort Line, conveyors: 6' x 20' belt, 3' x 30" incline, 4' x 25' manual sort, w/ bale breaker, 90" width color sorter, 10,000 LBS/HR
Category: Sorting Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Mss Optical
Optical/Infrared Sort Line Consisting Of The Following Pieces: 20' Long x 6' Wide Hustler Flatbelt Conveyor Feeding Into Bale Breaker Bale Breaker With Dual Motor Driven Through Right Angle Gearboxes With Control Panel 30' Long x 3' Wide Incline Conveyor 25' Long x 4' Wide Manual Sorting ...more
Agilent #4500a-FTIR, Spectrometer, portable case, 122°F, #18225A
Category: Spectrometers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Agilent
Model: 4500A
Used Agilent 4500a FTIR Spectrometer w/ Portable Case Part No. 0021-020, Serial No. My14130029 System Size 8.5" x 11.5" x 7.5" 32F-122F Operating Temp 4000-650 CM Spectral Range 4032cm Resolution.
Spin Dryer for Beringer WRP12 Water Ring Pelletizer, No Screen, 2 HP, 1170 RPM, 460 V
Category: Spin Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Beringer
Used Spin Dryer For Beringer WRP12 Water Ring Pelletizer 2 HP Nidec Motor, Model CF77, Frame 184TC 460/3/60, 3.1A 1170 RPM DOES NOT HAVE SCREEN Approximate Dimensions: 37" L x 26" W x 68" H.
Arlington Machinery has 11 more
listings in Spin Dryers.
Squirrel Cage AC Electric Motor
18 Results
40 HP 1800 RPM WEG, AC motor, Frame 324T, TEFC, 460 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Weg
Frame: 324T
BRAND NEW 40 HP WEG AC Motor, Frame 324T Mode: 04018ET3E324T-W22S Premium Efficiency AC Motor Enclosure: TEFC RPM: 1800 Frame: 324T 460/3/60, 47.1 FLA Approximate Dimensions: 32" L x 20" W x 16" H, 591 LBS.
Arlington Machinery has 17 more
listings in Squirrel Cage AC Electric Motor.
8.5" Wayne Extrusion, pneu, dual 1 HP
Category: Stackers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wayne
Used 8.5" Wide Wayne Lab Sheet Roll Stack 8.5" Wide x 6" Diameter Chrome Rolls Driven By 1 HP AC Motor 8.5" Wide x 3" Diameter Rubber Puller Rolls Driven By 1 HP AC Motor Pneumatic Roll Pressure Approximate Dimensions: 94" L x 40" W x 60" H.
Arlington Machinery has 5 more
listings in Stackers.
Stainless Steel Tanks and Vessels
3 Results
150 gallon Groen #TA150-SPM, kettle, 5 HP, 80 psi @ 325°F, agitator bridge
Category: Stainless Steel Tanks and Vessels
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Groen
Used 150 Gallon Groen Kettle, Model TA150 SPM, 5 Hp 42" Diameter, 14" Strait Side, Half Hinged Top Cover Hemi Bottom Bolted On the Agitator Bridge 5 Hp Motor Max W.P. 80 PSI at 325F S/N: 25125.
Arlington Machinery has 2 more
listings in Stainless Steel Tanks and Vessels.
Strapping Machines and Case Tapers
1 Result
3M #120A, box tapers, 2005/2006 (2 available)
Category: Strapping Machines and Case Tapers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: 3m
Model: 120
2 Used 3M Box Tapers, Model 120A, New In 2005 and 2006 Type 19700 115V, 3.6 Amp S/N 50466, New In 2005 S/N 50588, New In 2006 Quoted As-Is and Untested Approx. Dimensions And Weight Per Machine: 48" L x 30" W x 66" H, 300 LBS.
Temperature Control Units (Oil & Water)
10 Results
12 KW AEC #TC131, Temperature Controller, 36 GPM, 30 psig, 1 HP Pump, 480 V, 2019
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Aec
Model: TC131
Year: 2019
Unused 12 KW AEC TC131 Temperature Controller, New In 2019 12 KW Heater 1 HP Pump 36 GPM Flow Rate 30 PSIG Closed Loop Heat Exchanger Option - HEAT AND COOL OPTION M5 Advanced Controller With 3.5" HMI Touch Screen USB Data Logging 480/3/60, 16.44 AMPS S/N 49F0308 New In 2019 Approximate Dimensions: 28" L x 14" W x 52" ...more
Arlington Machinery has 9 more
listings in Temperature Control Units (Oil & Water).
Thermoformer Machines
4 Results
Brown #B4042 thermoforming line, 40" x 42", 6" daylight, w/ former & T340 trim press. 1996
Category: Thermoformer Machines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: B4042
40" Brown model B4042 thermoforming line with, B4042 former and T340 trim press. New 1996 Brown model B4042 in line thermoformer with 3 roll cooling rolls. 40 x 42" Brown servo thermoformer with upgraded servo drives. Max daylight of 6" up and down. 40" wide Brown model T340 trim press with canopy servo index 40" x ...more
Arlington Machinery has 3 more
listings in Thermoformer Machines.
Thermoforming Molds
11 Results
Brown, Thermoforming Mold, 12 oz. Cup, 80 Cavity w/20 Cavity Trim Die, 2020
Category: Thermoforming Molds
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Year: 2020
Used 12 Oz Brown Thermoforming Mold, 2020 80 Cavity with Freeman 20 Cavity Trim Die, Product Weight 7.7g.
Arlington Machinery has 10 more
listings in Thermoforming Molds.
Tooling and Accessories - Miscellaneous
1 Result
Streamline, Pipe Die For HDPE, 12" to 16", 12" bushing, 12" conpro adj sleeve, w/ tilt cart, 2018
Seller: Arlington Machinery
Location: Lake Zurich, IL
Model: STREAMLINE
Year: 2018
"12"" to 16"" Streamline Pipe Die New In 2018 Includes 12"" Bushing And Conpro 12"" Adjustable Sleeve Approx. 30 days Of Run Time Does Not Include Adapter To Extruder Includes Tilt Cart".
30 Ton, Brown #T-345V, High Speed Vertical Trim Press, 145 SPM, 53" width, 30 HP, Panelview+ Control, w/ 2 plate carts, 2021
Category: Trimming Presses
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: T-345V
Year: 2021
Used Brown Machine Model T-345V V-Series High Speed Vertical Trim Press S/N 16347 New In 2021 30 Ton 16,711 Hours Max Die Size 57" x 30", Up to 145 Strokes Per Minute 53" Maximum Sheet Width Brown Controls, Allen Bradley Panelview Plus Digital Display 30 HP SEW AC Motor Driven By Allen-Bradley Powerflex 755 Drive ...more
Arlington Machinery has 3 more
listings in Trimming Presses.
Tube and Pipe Cut Off Machines
1 Result
30" RDN #C430, crosscut saw, 14" diameter blade, 2 HP, 1996
Category: Tube and Pipe Cut Off Machines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rdn
Model: C430
Year: 1996
Used 30" Wide RDN Model C430 Crosscut Saw 30" W x 4" H Cutting Capacity 14" Diameter Blade New 2 HP Weg AC Motor New In 1996 S/N: 36814 230/3/60, 7A Saw Does Not Have Encoder For Cut To Length Approximate Dimensions: 60" L x 58" W x 72" H.
Turbo-centrifugal Blowers
5 Results
1400 cfm, 1.7 S.P., Peerless #11F, blower, 1 HP, 1393 RPM
Category: Turbo-centrifugal Blowers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Peerless
Model: 11F
Peerless Blowers Model 11F, 1 Hp 51068009 1400 CFM RPM1393.
Arlington Machinery has 4 more
listings in Turbo-centrifugal Blowers.
Turrets and Turret Tooling and Attachments
1 Result
Parkinson, turret winder, 78" wide, 24" max roll diameter, 3 shafts, 3 HP
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Parkinson Technologies
Used 78" Wide Parkinson Turret Winder (72" Roll Width On Shaft) 24" Diameter Max OD On Rolls, 3" Cores 3 Position Shafts Driven With 2 HP Baldor Vector Duty Motors With Heavy Duty Gearboxes Main Turret Driven By 3 HP Baldor Motor Through 1800:1 Cone Drive Gearbox Magpower Cygnus Web Tension Control, and Wheel Speed ...more
Ultrasonic Welders
1 Result
Herman #HIQ-Evolution, ultrasonic welder, 30 KW, 2009
Category: Ultrasonic Welders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Herman
Model: HIQ-EVOLUTION
Year: 2009
Herrmann Model HIQ Evolution Ultrasonic Welder 30Kw 230 Volt, 24 Volt Control Type Hi-0 S/N SM9 361/09 New in 2009.
Universal Fatigue Testers
1 Result
Instron #3366, table mounted materials testing system, 120 V.
Category: Universal Fatigue Testers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Instron
Model: 3366
Instron Model 3366 Table Mounted Materials Testing System (120 V) Digital crosshead drive system with full variable speed control Integrated digital closed-loop control and data acquisition electronics Crosshead extension and load measurements channels 2 Tension/Compression Load Cells – 1 kN load cell, 10 kN ...more
Conair #B32, load control for central vacuum system, 32 vacuum receivers, 8 vacuum pumps
Category: Vacuum Chambers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used Conair B32 Load Control, 32 Maximum Number Of Vacuum Receivers 8 Maximum Number Of Vacuum Pumps Allen Bradley PLC With Touch Screen S/N 154987. 16 Amps Dimensions: 32" x 24" x12.5" 80 lbs 120 Volt Unit Boots Up But Some Parameters Are Password Protected.
Arlington Machinery has 1 more
listing in Vacuum Chambers.
Vacuum Dryers
3 Results
Maguire #LPD-200, low pressure dryer, 200 lb/hr, 350°F,
Category: Vacuum Dryers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maguire
Model: LPD-200
Used 200 LB/HR Maguire Low Pressure Dryer, Model LPD-200 350F Drying Temperature Canister Volume: 2 CU/FT 5KW Heater Element 3.5 HP Blower Total Power Supply: 480/3/60, (7.7KW) 30A Compressed Air Requirement: 80 PSI Compressed Usage: 2.4 CFM Approximate Dimensions: 40" L x 35" W x 95" H.
Arlington Machinery has 2 more
listings in Vacuum Dryers.
Vacuum Loaders
3 Results
Conair #B10, Sentral Loader Control, 115 V, 2003
Category: Vacuum Loaders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: B10
Year: 2003
Used Conair Sentral Loader Control, SLC Basic Model B10, Control Box P/N 107-432-01 Control Screen Pump On/Off Button, 10 Loader Locations, Increase/Decrease Loader Setpoint Controls Readouts: Loader Number, Loader Disable/Enable, Load Time, Unload Time, Regrind % Time, Ratio Cycles 115V/3A/1-Phase New in 2003 ...more
Arlington Machinery has 2 more
listings in Vacuum Loaders.
135 CFM, Conair #RG1-11, vacuum pump, 11.5 HP, single stage regenerative pump, 2.5" line
Category: Vacuum Pumps
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: RG1-11
Used 11.5 HP Conair Vacuum Pump, Model RG1-11 Single Stage Regenerative Pump, With Starter 2.5" Line 135 ft3/min Airflow 460/3/60 17.6 amps.
Arlington Machinery has 13 more
listings in Vacuum Pumps.
Vertical Band Saws
1 Result
16" Jet #JWBS-16, Band Saw, 1.5 HP, 1720 RPM, 115/230 V, 2008
Category: Vertical Band Saws
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jet
Model: JWBS-16
Year: 2008
Used 16" Jet Band Saw, Model JWBS-16, 1.5 HP Machine Is Prewired 115V 1.5 HP Jet Equipment & Tools AC Motor, S/N: K002319 115-230V/1/60, 11.5A-5.8A 1720 RPM New in 2008 S/N: 8102263 Approximate Dimensions: 34" L x 26" W x 70" H.
Vertical CNC Machining Centers
3 Results
Makino #E33, vertical machining center, 30 automatic tool changer, 25.6" X, 17.7" Y, 17.7" Z, 40000 RPM, HSK E32, 11.25 HP, 35.5"x19.7"tbl., Professional 5, rigid tap, 2008
Category: Vertical CNC Machining Centers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Makino
Model: E33
Year: 2008
Used Makino E33 Hard Milling & Graphite VMC Travels: 25.6” x 17.7” x 17.7” Table Size: 35.5” x 19.7” Spindle Speeds: 400-40,000 rpm Spindle Taper: HSK E32 Spindle HP: 11.25 ATC: 30 Rapid Feed Rates: 1,574 ipm Cutting Feed Rates: ,574 ipm Max. Work Piece Weight: 1,102 lbs. New In 2008 ...more
Arlington Machinery has 2 more
listings in Vertical CNC Machining Centers.
Vibrating Screens
1 Result
72" Midwestern #MR60C60-72-RAS, Gyra-Vib Classifier, 2 Decks, 2.5 HP, 7.6 amps, 230/460 V.
Category: Vibrating Screens
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Midwestern
Model: MR60C60-72-RAS
72" Midwestern Gyra-Vib Classifier 2 Decks 2.5 HP AC Motor 230/460 7.6 Amps At 230 3.8 Amps At 480 Model MR60C60-72-RAS S/N 1016-5051.
Volumetric Feeders for Powder
1 Result
Maguire #MCP-4-18-EAC, Concentrate Feeder, 0.5-4 lb./hr. Output, 1/2" Auger Size, 30 RPM
Category: Volumetric Feeders for Powder
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maguire
1/2” Maguire Concentrate Feeder Auger Size 1/2' (12mm), Max RPM 30, Continuous Output.5 - 4 lbs/hr Forward/Reverse Toggle Switch Maguire Volumetric Control, MCF-4-18- EAC S/N STD43751 Approximate Dimensions: 40" L x 20" W x 52" H.
Washer Parts - Miscellaneous
1 Result
PE, washline equipment
Category: Washer Parts - Miscellaneous
Seller: Arlington Machinery
Location: Lake Zurich, IL
PE WASH SYSTEM 1,500 +’s LBS Per/HR. Reported GRANULATOR HAS BEEN REMOVED TROMMEL SCREEN 12' long x 5' diameter trommel barrel with 2" screen openings. Dual drive trunnions driven by belts and pulleys powered by a 2 HP 230/460V, 60 Hz, 3 PHz. AC Motor with a gear reducer. In-Feed bottle catch Cowling ...more
Water Cooling Tanks & Troughs
1 Result
13.5" width x 2.5' L Vibrating Stainless steel trougg with perforated deck & spring isolated frame
Category: Water Cooling Tanks & Troughs
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 33.5" L x 13.5" W Vibrating Stainless Steel Trough with Perforated Deck & Spring Isolated Frame Effective Screen Dimensions: 33.5" L x 13.5" W Screen opening: 0.2", 5 mm Perforation AC Motor Driven Integrated Telemecanique Motor Starter With Start/Stop Controls Under Trough Discharge Chute For Screened Fines ...more
Wire EDM Machine
2 Results
Fanuc #Robocut-A-0iA, Electrical Discharge Machine, Fanuc 18iW controller, 220 V., 3 phase, 60 Hz, 1999
Category: Wire EDM Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Fanuc
Model: ROBOCUT-A-0IA
Year: 1999
Used Fanuc Robocut EDM, Model A-0iA, New in 1999 Fanuc Series 18i-W Controller 220/3/60.
Arlington Machinery has 1 more
listing in Wire EDM Machine.
