back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Extrusion Dies

59 Results

1" CO Extrusion Die Blow, 1" inlets w/extruder adaptor plate, #44561

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Co
Model: 44561
Used CO Extrusion die blow, 1" inlets with extruder adaptor plate.

4" Foam die with cooling mandrel, #37673

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: 37673
Used 4" foam die with cooling mandrel.

6" ETTI Flex lip sheet extrusion die, approx 45 Degrees downward angle, s/n 847-526-1606

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Etti
Used 6″ ETTI flex lip sheet extrusion die, Job #6855. Has center back input supplying approximatley 45 degree downward angle extrusion., Location: On Site at Perry (Hainesport, NJ - ...more

6" Flex Lip sheet extrusion die with 90 Degrees down bottom center feed supply

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex
Used 6″ wide flex lip sheet extrusion die with 90 degree down bottom center feed supply., Location: On Site at Perry (Hainesport, NJ - USA).

6.75" Strand die, 12 holes

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 6.75″ wide strand die with 12 holes. Die currently bolted to a square adapter plate which can easily be separated., Location: On Site at Perry (Hainesport, NJ - USA).

Get email updates for newly added Extrusion Dies

8" Poly System #10" SLD, rotating blown film die with dual lip air ring

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Poly
Model: 10SLD
Used 8″ Poly System model #10″SLD rotating blown film die including dual lip air ring. Has die temperature control and die cart. Overall height 61″ (not on wheels) has ...more

10" Addex, rotating blown film die with single lip air ring

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Addex
Used 10″ Addex rotating blown film die with single lip air ring. Includes die temperature control panel, rotator, and die cart. Includes single lip air ring., Location: On Site at ...more

10" Ribbon slot die, fed from 1.5" heated feed throat, 8.5" diameter feed side, #12843-4

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: 12843-4
Used 10" Ribbon slot die, fed from 1.5" heated feed throat, 8.5" diameter feed side.

14" EDI #H40, sheet die, 3 center back entrances, unused, 1992

Global Equipment International | Chalfont, PA | Jordan Feldman |
Category: Extrusion Dies
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Edi
Model: H40
Year: 1992
921703.011, One (1) unused EDI 14" sheet die. Unit has three center back entrances. Center entrance is 1.0" diameter and upper and lower entrances are.5" diameter upper flexible lip. Fixed ...more

14" Sano no #5-layer-stack, 5-layer blown film die, mounted on fixed cart, 1996

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sano
Model: 5-LAYER-ST
Year: 1996
Used Sano 14″ diameter 5-layer blown film die. Model 5-layer stack 14″. Mounted on fixed cart. New 1996. Serial number 3094-21. 460 volt input., Location: South USA.

16" Adjustable lift sheet coating die, non-flex lip control, back center feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 16″ wide adjustable lift sheet/coating die. Non flex lip control but is adjustable lip. Has back center feed. Previously used on extrusion coating line., Location: On Site at ...more

20" Cloeren, manual flex lip die with micro adjustment

Global Equipment International | Chalfont, PA | Jordan Feldman |
Category: Extrusion Dies
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Cloeren
921774.018, One (1) used 20" wide Cloeren Sheet Die. Upper integral flexible lip with micro adjustment. Fixed removeable lower lip. Three oblong entrances in back of die. Designed to run ...more

22" Cloeren, manual flex 3 layer sheet die with micro adjustment

Global Equipment International | Chalfont, PA | Jordan Feldman |
Category: Extrusion Dies
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Cloeren
921774.001, One (1) used 22" wide Cloeren Epoch IV manual, 3 Layer flex lip extrusion sheet die. Upper integral flexible lip with micro adjustment. Fixed removeable lower lip. Three oblong ...more

22" EDI Ultraflex #R75, sheet extrusion die, 45 Degrees restrictor bar, center back feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: R75
Used 22″ wide EDI Ultraflex Model R75 sheet extrusion die. Serial #0625265. Includes 45 degree restrictor bar, center back feed., Location: South USA.

24" Flex Lip sheet extrusion die, 45 Degrees restrictor bar, 30/45 Degrees down angle adapter

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex
Used 24″ wide flex lip sheet extrusion die with 45 degree restrictor bar and 30/45 degree down angle adapter., Location: On Site at Perry (Hainesport, NJ - USA).

28" EDI Autoflex #H40, coating die, 1" inlet center back feed, 1980

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: H40
Year: 1980
Used 28″ EDI coating die. Model Autoflex H40, serial #80-3996-1-2, new 1980. Currently set up as manually lip adjusted die, not Autoflex. Has center back feed with approximately ...more

28.5" EDI Ultraflex #H40, sheet die, 1.25" rear materiual entry, 1989

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: H40
Year: 1989
Used EDI 28.5″ Ultraflex H40 sheet die.001-.040 lip opening, 240 volt 350 watt heaters. 1.25″ diameter rear material entry. Mounted on 41″ centerline V-caster stand. ...more

30" Cloeren, adjustable lip extrusion die, internal deckle, back center feed, 2003

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cloeren
Year: 2003
Used 30″ wide Cloeren adjustable lip extrusion die. Has internal deckle, and back center feed. New 2003., Location: On Site at Perry (Hainesport, NJ - USA).

30" 2-Layer blown film spiral die

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
One used 30″ two-layer blown film spiral type die. 0.055 gap., Location: South USA.

31" EDI Ultraflex #RC75, flex lip sheet extrusion die, 45 Degrees restrictor bar, center back feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: RC75
Used 31″ wide EDI Flexlip extrusion die Model Ultraflex RC75. Serial #01-22333. Includes 45 degree restrictor bar, center back feed., Location: South USA.

31" Flex lip sheet extrusion die, 90 Degrees restrictor bar

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex
Used 31″ wide Flexlip sheet extrusion die with 90 degree restrictor bar., Location: South USA.

34" Cloeren, 3-layer vane type co-extrusion sheet die, 1988, #3974

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Year: 1988
Product s, Used 34" Cloeren 3-Layer Vane Type Co-Extrusion Sheet Die with Autoflex automatic die lip adjustment, self locking vanes can be adjusted to control layer uniformity while ...more

34" GEC #IBC, dual layer blow film die, mounted on fixed cart, includes dual lip bearing, #47623

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Gec
Model: IBC
Used 34" Gloucester IBC dual layer blow film die, mounted on fixed cart, includes dual lip bearing.

40" EDI Ultraflex #RC75, flex lip sheet extrusion die, 45 Degrees restrictor bar, center back feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: RC75
Used 40″ wide EDI Flexlip extrusion die Model Ultraflex RC75. Serial #03-23343. Includes 45 degree restrictor bar, center back feed., Location: South USA.

40" Flex lip sheet extrusion die, 90 Degrees restrictor bar

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex
Used 40″ wide Flexlip sheet extrusion die with 90 degree restrictor bar., Location: South USA.

40" Flex Lip sheet extrusion die

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex Lip
Used 40″ wide flex lip sheet extrusion die with end feed. Previously used for sheet extrusion of themoformed hot/cold drinking cup lids., Location: On Site at Perry (Hainesport, NJ - ...more

40" Johnson #Spartan, sheet die, integral upper flexible lip & fixed lower lip

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Johnson
Model: SPARTAN
Used 40″ Johnson “Spartan” sheet die having an integral upper flexible lip and a fixed lower lip. Serial #2657-68. Gap currently.013″., Location: On Site at Perry ...more

40" Extrusion coating die, upper sliding lip w/push/pull adjust, fixed removable lower lip

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 40″ extrusion coating die. Unit has an upper sliding lip with push/pull adjustment and a fixed removeable lower lip. External adjustable deckles. Center back fed entrance. ...more

42" Cloeren #Epoch V, sheet die, .001"-.030" lip opening range, 2002, #5822

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Model: EPOCH V
Year: 2002
Product s, Used 42" Cloeren Model Epoch V Sheet Die,.001"-.030" Lip Opening Range,.03 Netural Opening, 36-39-RC Tool Steel, Hard Chrome Plated.002-.0025, Five Heat Zones, 240 Volt, Die ...more

42" EDI #H-40, sheet die, upper flexible lip, integral fixed lower lip, end center feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: H-40
Used 42″ EDI model H-40 sheet die having an upper flexible lip and an integral fixed lower lip. End center fed entrance. Die is presently disassembled., Location: On Site at Perry ...more

42" Sheet extrusion die, 1.25" dia rear material entry, serial 812264-2

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 42″ sheet extrusion die, manufacturer unknown. With 1.25″ diameter rear material entry. 230 volts. Serial #8812264-2., Location: Midwest USA.

48" EDI Ultraflex #HR75, sheet die, #17960A

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Edi
Model: ULTRAFLEX HR75
Product s, Used 48" EDI Ultraflex Die Model HR75, Flexlip, With R Bar, Center-back Fed, On Stand 54" Centerline, S/N 87.11011-1.

49" EDI #H40, sheet die, upper flex lip, fixed lower lip, back center feed, 5 zone, 480 V., 1997, #35607, 1997

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Edi
Model: H40
Year: 1997
Used 49" EDI sheet die, model H-40, upper flex lip, fixed lower lip, back center feed, 5 zone, 480 volt, new 1997.

49" Extrusion Dies #H-40, sheet die, upper flexible lip, fixed removable lower lip, 1997

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Extrusion Dies
Model: H-40
Year: 1997
Used 49″ wide Extrusion Dies Inc sheet die. Model H-40, serial #97-19250., new 1997. Has upper flexible lip and fixed removable lower lip. Center back feed entrance. Unit set up for ...more

52" EDI #52U/F-R75, dual entry sheet die, with restrictor bar, poly side control, 2008

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: 52U/F-R75
Year: 2008
Unused 52″ EDI dual entry sheet die. Model 52 U/F R75, serial #08-27852, new 2008. restrictor bar and poly side control., Location: On Site at Perry (Hainesport, NJ - USA).

52" EDI, Flex lip sheet die, deckless, restrictor bar, 1" back center feed, s/n #81-6255-87-11010-01, used, #25860

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Edi
Model: 81-6255-87
Used 52" EDI Flex Lip Sheet Die, deckless, restrictor bar, with 1" back center feed, Serial No. 81-6255-87-11010-01.

52" EDI Ultraflex #RC75, flex lip sheet extrusion die, 45 Degrees restrictor bar, center back feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: RC75
Used 52″ wide EDI Flexlip extrusion die Model Ultraflex RC75. Serial #06-25719. Includes 45 degree restrictor bar, center back feed., Location: South USA.

52" Flex lip sheet extrusion die, 90 Degrees restrictor bar

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Flex
Used 52″ wide Flexlip sheet extrusion die with 90 degree restrictor bar., Location: South USA.

53" EDI Ultraflex #RC75, flex lip sheet extrusion die, 45 Degrees restrictor bar, center back feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: RC75
Used 53″ wide EDI Flexlip extrusion die Model Ultraflex RC75. Serial #06-25801. Includes 45 degree restrictor bar, center back feed., Location: South USA.

55" Cloeren #Epoch V, sheet die, AutoGauge 5 push/pull adj.lip, 1992, #5821

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Model: EPOCH V
Year: 1992
Product s, Used 55" Cloeren, Model Epoch V Sheet Die, AutoGauge 5 Push/Pull Adjustable Lip, 0-.04" Gap Range, Tool Steel,.001 Electroless Nickel Plating, 5 Zones, 240 Volt, 1992 Vintage ...more

55" Cloeren #Epoch V, sheet die, .001"-.030" lip opening range, 2002, #5823

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Model: EPOCH V
Year: 2002
Product s, Used 55" Cloeren Model Epoch V Sheet Die,.001"-.030" Lip Opening Range,.03 Netural Opening, 36-39-RC Tool Steel, Hard Chrome Plated.002-.0025, Five Heat Zones, 240 Volt, Die ...more

57" EDI #U-40, flexible sheet die, upper flexible lip, lixed lower lip, back feed entry

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: U-40
Used 57″ EDI flexible sheet die. Model U-40, Serial # 71-1042. Has an upper flexible lip, fixed lower lip, and approximately a 1″ back center fed entrance., Location: On Site at ...more

57" Auto flex sheet extrusion die, with NDC thickness gauge

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 57″ wide EDI Auto Flex sheet extrusion die with NDC thickness gauge including controls. Has fixed lower lip. Die is currently mounted on a die cart supplying 42″ discharge ...more

Nordson #H-40, Sheet Die, 2002 - 58" Slot Opening, Unused/ Refurbished, 2002

Revelation Machinery | Chicago, IL | David |
Category: Extrusion Dies
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nordson
Model: H-40
Year: 2002
Machine Type:, Plastics Machinery, Model:, H-40 Extrusion Dies, Make:, Nordson, Year:, 2002, Unused Refurbished Extrusion Dies / Nordson model H-40 sheet die. S/N 01-22588-1. 58″ slot ...more

60" EDI, Heavy Duty Sheet Disk, vertical, restrictor bar, removable upper/lower lips, 240 V., sgl.phase, 1989, #49900, 1989

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Edi
Model: 49900
Year: 1989
Used EDI 60" heavy duty sheet die, vertical restrictor bar, removable upper and lower lip, patent# 3859032, 240 volt, single phase, serial# 89-12957, built 1989.

60" EDI #H40 Contour, sheet extrusion die, serial 05-24850

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Model: H40
Used 60″ wide EDI Model H40 “Contour” sheet extrusion die. Serial #05-24850., Location: South USA.

60" EDI, flexible sheet die, upper flexible lip, fixed lower lip, back center feed entry

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Used 60″ EDI Flexible sheet die. Serial #75-2023. Has an upper flexible lip, fixed lower lip, and approximately a 3/4″ back center fed entrance., Location: On Site at Perry ...more

60" EDI, extrusion dies sheet die, back center feed with adapter, serial 12-31509-1

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Used 60″ wide EDI Extrusion Dies Sheet Die. Serial#12-31509-1. Back center feed with adapter., Location: On Site at Perry (Hainesport, NJ - USA).

60" Goulding sheet die

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Goulding
Used 60″ Goulding Sheet Die, Location: On Site at Perry (Hainesport, NJ - USA).

Nordson #H-40, Sheet Die Having A 60" Slot Opening

Revelation Machinery | Chicago, IL | David |
Category: Extrusion Dies
Seller: Revelation Machinery
Location: Chicago, IL
Model: H-40
Machine Type:, Plastics Machinery, Model:, H-40 Extrusion Dies, Make:, EDI/Nordson, Year:, N/A, Model HD-40 Sheet Die Having a 60″ Slot Opening. Integral Upper Flexible Lip and Fixed ...more

68" Cloeren, co-ex die, 3-layer w/die block, excellent, used, 1985, #3975

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Year: 1985
Product s, Used 68" Cloeren 3-layer vane type co-extrusion sheet die with autoflex automatic die lip adjustment, self locking vanes can be adjusted to control layer uniformity while ...more

72" Allied Duraflow #AHM-100, flex lip sheet extrusion die, back center feed

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Allied
Model: AHM-100
72″ Wide Allied “Duraflow” AHM-100 flex lip sheet extrusion die with 45 degree down adapter. Lip opening.001″-.100″ opening. Has back center feed, 4″w x ...more

78" Johnson, heavy duty sheet die, serial RW-1001-69

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Johnson
Used 78″ Wide Johnson Heavy Duty Sheet Die. Serial #RW-1001-69., Location: On Site at Perry (Hainesport, NJ - USA).

80" EDI Ultraflex #H75ECF, Flex lip die, .025"-.1" opening range, 7-zones, s/n #96-18544, used, #22445

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Edi
Model: H75ECF
Used 80" EDI Flex Lip Die, Model ULTRAFLEXH75ECF, flexible upper and fixed lower lip,.025" to.1" opening range, side feed with 1.25" opening, 7 zones, 480 volt, Serial# ...more

102" EDI, heavy duty sheet die, serial 76-2318

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Edi
Used 102″ EDI Heavy Duty Sheet Die, Serial #: 76-2318, Location: On Site at Perry (Hainesport, NJ - USA).

38" Cloeren, die w/ feedblock and cart, on casters, #19150A

Arlington Machinery | Lake Zurich, IL | Sales |
Category: Extrusion Dies
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cloeren
Model: 19150A
Product s, Used 38" Wide Cloren Die With Feedblock and Cart, Cloren S/N 02-7031 Type 70R2300, With Restrictor Bar, Comes With Cloren Multi-Layer Feed Block and 8 Zone Heat Controller With ...more

Cloeren, co-extrusion die block, 5 layer, used, #40209

Federal Equipment Company | Cleveland, OH | Sales or Contact Rep. |
Category: Extrusion Dies
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Cloeren
Model: 40209
Used Cloeren co-extrusion die block, 5 layer.

RMS roller die head, single roll roller die, 23" roll face, 12" dia roll

Soberay & Sons Ltd | Cleveland, OH | Ryan Soberay |
Category: Extrusion Dies
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Rms
One (1) Used RMS Roller die head, single roll roller die, 6" ID inlet mating with extruder, 23" roll face, approximately 20" usable surface, 12" diameter roll.

Strand die with replaceable die plate, 15 hole

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 15 hole strand die last used with a 3.5″ extruder. Has replaceable die plate with seven (7) holes currently open., Location: On Site at Perry (Hainesport, NJ - USA).