Buy or Sell Your Makino A51
AI-ranked results for makino a51 - closest matches first
32"/44" x 200" Lehigh #32200B, Heavy-Duty Gap Engine Lathe, 5" Bore, 20 HP, 800 RPM, 22" swing over cross slide, 3-jaw, 15" chuck, Steady Rest, 2008
Aucto | San Francisco, CA
Category: Sliding & Gap Bed Lathes
Seller: Aucto
Location: Louisville, KY
Mfr: Lehigh
Model: 32200B
Year: 2008
THIS LEHIGH 32/44" X 200" HEAVY-DUTY GAP-TYPE ENGINE LATHE, MODEL 3200B, SERIES H, S A 5-INCH HOLE THROUGH THE SPINDLE AND A D1-11 SPINDLE NOSE. IT IS INCH-METRIC THREADING CAPABILITIES, A THREADING DIAL, AND POWER RAPID TRAVERSE. THE LATHE HAS A RATED SWING OVER BED WAYS OF 32 INCHES, AN ACTUAL SWING OVER ...more
64 Stand, RLM rollformer, 3" spindle diameter, 20"-24" spindle, gearboxes & outboards stands
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Spindle Diameter: 3”, Roll Space: 20”-24", Vertical Adjustment: 6.5” - 12”, Table to Center of Bottom Spindle: 9 3/4”, (64) Total Stands including., - (51) Stands, top and bottom spindles driven., - (10) Stands, bottom spindle driven, compatible for gear linkage to drive top spindle., - ...more
JUST ADDED!
SNK #FSP-120, 5-axis CNC vertical profiler, 120" X, 50" Y, 24" Z, 30 HP, 4000 RPM, #50 taper
Star Equipment Co., Inc. | Utica, MI
Category: Vertical CNC Machining Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Snk
Model: FSP 120
SNK FSP 120 5-Axis Vertical Profiler: 120" X, 50" Y, 24" Z, 30 hp, 4,000 RPM, 40-tool ATC, #50 taper. Ideal for versatile machining tasks, offering precision and reliability in a used condition., Direction:: Vertical, Taper:: # 50, Top RPM:: 4,000, Top RPM Opt:: 10,000, HP (30 min rating):: 30.00, Tool Carrier:: ATC ...more
#HVS-140 horizontal accumulator, 2.4"-15.7" strip width, used
Kent Corporation | North Royalton, OH
Category: Accumulators
Seller: Kent Corporation
Location: North Royalton, OH
Model: HVS140 HORIZONTAL ACCUMULATOR
Material Mix: HR Carbon Steel/Cold Roll Carbon Steel, Min Strip: 2.4", Max Strip: 15.7", Min Strip Gauge:.039", Max Strip Gauge:.178", Max Yield Strength: 51,000psi, Max Tensile Strength: 80,000psi, 480/3/60, Call for Price!!.
JUST ADDED!
Makino #Duo-43, CNC Wire Edm, 17.8" Z, 11.8" Y, 12.6" Z, 28" x22" table, 2011
Revelation Machinery | Chicago, IL
Category: Wire EDM Machine
Seller: Revelation Machinery
Location: Chicago, IL
Model: DUO-43
Year: 2011
Make: Makino, Model: Duo 43, Year: 2011, Machine Location: Upon Request, X, Y & Z Axis Travel: 17.8″ x 11.8″ x 12.6″, U & V Axis Travel: ±3.97″, Table Size: 27.95″ x 22.04″, Maximum Load on Table: 1,764 Lbs., Distance Floor to Table Top: 39.37″, Ball Screw ...more
Mazak #Integrex-J-200, CNC lathe, 2.5" bar, 5000 RPM, 15 HP, 36 ATC, Mazatrol Matrix, thru spindle coolant, 2013
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: INTEGREX-J-200
Year: 2013
Upgrade your shop floor with the Mazak Integrex J-200, a compact and powerful 5-axis CNC turning center designed for precision and efficiency. This advanced multi-tasking lathe combines turning, milling, and drilling operations in a single setup reducing cycle time and increasing part accuracy., Ideal for high-mix ...more
JUST ADDED!
Mazak #Integrex-J-200, CNC lathe, 20.8" swing, 10" chuck, 2.5" bar, 19.69" dia., 19.69" lgth, 36 ATC, Mazatrol Matrix, 2013
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Mazak
Model: INTEGREX-J-200
Year: 2013
Mazak Integrex j-200 (2013), Maximum Swing 20.87", Max Turning Diameter 19.69", Maximum Cutting Length 19.69", X-Axis Travel 17.72", Z-Axis Travel 21.65", Y-Axis Travel 7.87", C-axis Indexing: 0.001 deg, Main Spindle Chuck Size 10", Main Spindle Bore Diameter 3", Main Spindle ...more
Mazak #Integrex-J-200, 5" Axis Plus Machining Center, 20.9" Swing, 10" Chuck, 3" Bore, 2.5" Bar, 19.7" Turn diameter & Cut length, 5000 RPM, 36 ATC, 2013
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: INTEGREX-J-200
Year: 2013
The 2013 Mazak Integrex J-200 is a versatile multi-tasking CNC machine designed for single-setup machining of complex, medium-sized parts. Combining turning, milling, drilling, and tapping in one platform, it reduces cycle times while improving precision and efficiency. Ideal for aerospace, automotive, and medical ...more
Mazak #Cybertech-4500M, CNC Lathe, 33.8" Swing, 21" Chuck, 5.5" Bar, 31.88" Turn diameter, 120" Cut length, 50 HP, 1600 RPM, 12-Position Turret, 2010
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Mazak
Model: CYBERTECH 4500M
Year: 2010
MACHINE, Max Turning Diameter: 31.88", Maximum Cutting Length: 120", Maximum Swing over Cross Slide: 27.5", X-Axis Travel: 21.375", Z-Axis Travel: 123.25, W-Axis Travel: 100.39", Main Spindle Speed: 1,600 RPM, Main Spindle Horsepower: 50 HP, Upper Turret: 12, Dimensions: 284" X98" ...more
200 Ton, Eagle #PH2-200-118-48, hydraulic press, 48" stroke, 68" daylight, 118" x48"bed, 250 gallon hydraulic reservoir, 1998
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Eagle
Model: PH2-200
Year: 1998
ORDER 200, 200 Ton Eagle Hydraulic Press., Model PH2-200 118-48., s/n EP 98-10218., 48” stroke., 68” Daylight., 118” LR x 48” FB Ram, 118” LR x 48” FB Bed., Slide Advance (fast) 470 IPM, Slide Advance (slow) 40 IPM, Slide Retract (fast) 475 IPM, Floor Standing., Palm Buttons., 4 ...more
411 sq.ft., Kelvion, NF150LBA150, plate heat exchanger, 316L Stainless Steel plates, 145 psig @ 230°F, 2021
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Kelvion
Year: 2021
ITEM NO : 114152 QTY : 1 ALLOY : S SQ.FT. : 411 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS PLATES PSI (S) : 145 PSI (T) : 145 TEMP. DEG. F (S) : 230 TEMP. DEG. F (T) : 230 TUBE HOLES : 51 V/H : V CODE : NB SHELL NOZZLES : (2)6" TUBE NOZZLES : (2)6" 411 sq. ft. Plate Heat Exchanger, Mfg. by Kelvion in ...more
Mazak #QTN-200MS, CNC lathe, 8" chuck, 2.5" bar, A2-6, 12 turret, 35 HP, 5000 RPM, tool presetter, sub spindle, chip conveyor, 2005
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: QTN-200MS
Year: 2005
Sub-spindle| 7 Tool Holders| Milling Capabilities, Main Spindle Chuck: 8", Main Spindle Motor: 35 HP, Main Spindle Maximum Speed:: 5,000 RPM, Main Spindle Nose: A2-6, Bar Capacity: 2.56", Sub-Spindle: 6" chuck, Sub-Spindle Max Speed: 6,000 RPM, Sub-Spindle Motor: 5 HP, Turret: 12-station with live tooling (7.5 HP ...more
40 GPM, Union #TD-30, Triplex Production Pump, 2.75" stroke, 2" plungers, 3" suction, 2" discharge, 30 HP, 520 RPM
Power Zone Equipment | Center, CO
Category: Reciprocating Plunger Pumps
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Union
Brand/Model: Union TD-30 : Used Union TD-30 triplex production pump package with the following s: • 2.75" stroke • 30 HP • Steel fluid end • 2" plungers • 3" 300# NPT suction connection • 2" 300# NPT discharge connection • 3.44 gear ratio • Packaged with ...more
Mikro #2DH Pulverizer, 15 HP, c/s, #17612
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Mikro
Model: 2DH
Used Mikro Pulverizer, Model 2DH, carbon steel construction, dual screw feeder with 0.33 hp drive, 15 hp 208-230/460 volts main drive, serial #'s 62J571 and 8772.
3" Ercolina #TB80 Top Bender, 3" tube, 2-1/2"Schedule 40 pipe,vari-bend speed, #1425010
Vander Ziel Machinery Sales | Alto, MI
Category: Tube and Pipe Benders
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Ercolina
Model: TB-80
TB80 Top Bender with 3″ Tube or 2-1/2″ Schedule 40 Pipe Capacity. Control offers Multiple Program Storage with Individual Bend Angle and Springback Memory, Variable Bend Speed, SKU #1425010, Ercolina’s TB80 Top Bender is ideal for producing consistent quality bends in pipe, tube, squares, solids and ...more
Mazak #QTN-450II, CNC Turning Center, 29.5" swing, 18" chuck, 6.5" bar, Mazatrol Matrix Nexus Control, 2011
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Mazak
Model: QTN-450II
Year: 2011
29.5” X 22.8” Two Axis CNC Turning Center with Mazatrol Matrix Nexus CNC Control, 50 HP Spindle Motor, 12 Station Block Style Turret, Tail Stock, Collet Chuck, 3 - Jaw Chuck, Tool Setter, Automatic Tool Eye, Sequence Number Comparison STO Function, Y - Axis Control, Overload Detection System, Re-Threading ...more
Rosemount #TH2015 TankRadar REX gauging system, 80W max, new surplus
Lenmark Industries | Langley, BC
Category: Electrical MRO Components & Parts
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Rosemount
Model: TH2015
Year: 2015
SKU: 141946, Model: TH 2015, Condition: Surplus New, S/N: 76088, Dimensions: 15.00 (H) x 13.00 (W) x 16.00 (L) inches, Additional :, Unit ID: 63747, Mains: 100-120, 200-240VAC, 50-60Hz, 80W Max., Primary Bus: TRL/2, Secondary Bus: Analog Output, Active.
300 HP Cleaver-Brooks #CBLX-E-200-300-150ST, High Pressure Nat Gas Steam Boiler, 150 psi, 12,247,000 BTU/hr, 2017
C3 Surplus LLC | Miami, FL
Category: Firetube Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CBLX-E-200-300-150ST
Year: 2017
Overview, This 300 HP Cleaver Brooks CBLX E 200 300-150ST Packaged High Pressure Steam Boiler is designed for large-scale industrial steam applications requiring substantial steam generation capacity. This unit delivers exceptional steam production with proven Cleaver Brooks design and construction. Manufactured in ...more
JUST ADDED!
CMS #ARES-4818-PX5-Z1200, 5-Axis CNC Gantry Router, 192" x 53.3" table, 189" X, 71" Y, 47.3" Z, 20 HP, 18,000 RPM, 8-tool changer, Fanuc 31i-A5 CNC, 2013
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Cms
Model: ARES-4818-PX5-Z1200
Year: 2013
CMS ARES-4818-PX5-Z1200 5-Axis CNC Gantry Router (2013). s X/Y/Z 4800/1800/1200mm, B/C Axis 120/270, 20HP spindle at 18,000 RPM, 8-tool changer, FANUC 31i-A5 controls, Renishaw TS30 tool setter, vacuum table., CMS ARES-, 4818-PX5-Z1200 5-Axis CNC Aerospace Router Gantry type Milling Machine, Year: 2013, X-AXIS 4800MM ...more
400 Amp. General Electric A-Series-II, Panelboard, 480/277 Volts, 5 Breakers & Main
Quantum Technology | Shippensburg, PA
Category: Panelboards (Switchboards)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: General Electric
1x GE main breaker 5x GE 90 amp breakers We disclaim any liability for damages or losses resulting from the use or reliance on this content. We can ship international freight. Please contact us if you have any questions or issues checking out. No returns will be accepted due to items not in the picture. Thanks for ...more
Mazak #Dual-Turn-200, CNC Lathe, 8" Chuck, 12.5" Swing, 5.9" diameter X 5.9" L Machining, 4000 RPM, 30 HP, 2022
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: DUAL-TURN-200
Year: 2022
Swing: 12.59, Max. Machining Diameter: 5.9, Max. Machining Length: 5.9, Main Chuck Size: 8, Main Spindle Nose: A2-6, Sub Spindle Bore: 2.99, Max Spindle Speed Sub Spindle: 4000 RPM, Main and Sub Spindle Max RPM: 30 HP, Number of Turrets: 2, Tool Storage Capacity: 12 ea., Travel X-Axis: 9.05, Z-axis: 19.68.
Mazak #PowerMaster-3000N, Mazatrol Smooth Control, 34" swing, front & rear 4-jaw 28" chuck, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: POWERMASTER-3000N
Year: 2020
Mazak Power Master 3000U, Main Spindle Chuck: 28″, Maximum Swing: 34″, Maximum Cutting Diameter: 33″, Maximum Machining Length: 122″, Main Spindle RPM: 500 RPM, Main Spindle Bore: 12.25″, X Axis Travel: 26″, Z Axis Travel: 121″, Rapid Traverse Rate X: 472 IPM, Rapid Traverse ...more
JUST ADDED!
800 Amps, Square D #QED-A81118574, 480/277 Volts
Mt State Industrial Supply | Morgantown, WV
Category: Switchgear Switchboard
Seller: Mt State Industrial Supply
Location: Morgantown, WV
Mfr: Square D
Model: QED-A81118574
Qed switchboards comes with a 800 and a 800 main.A 400 and a 400 main.Is brand new never been hooked up and used still brand new in wrapping.Down below is what kind of breakers are in the switches, QED 400 Switch, 7-BJA36030yp 30 amp, 7-BJA36060yp 60 amp, QED 800 amp, 7-BJA36030yp 30 amp, 7-BJA36060yp 60 amp, QED main ...more
Mazak #Integrex-J-200, 5-Axis Plus machining center, Mazatrol matrix Control, Kitagawa chuck, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: INTEGREX-J-200
Year: 2013
MAZAK INTEGREX J200 5-Axis Plus Machining CenterMAX TURNING DIAMETER 19.69″MAXIMUM CUTTING LENGTH 19.69″X-AXIS TRAVEL 17.72″Z-AXIS TRAVEL 21.65″Y-AXIS TRAVEL 7.87″C-AXIS INDEXING 0.001 degMAIN SPINDLE BORE DIAMETER 3″MAIN SPINDLE MAXIMUM BAR WORK 2.5″MAIN SPINDLE SPEED 5,000 ...more
JUST ADDED!
Daewoo Doosan #Puma-5100B, CNC lathe, 35.4" swing, 24" chuck, 3-jaw, 46.4" centers, 27.2" dia., 44.4" lgth, Fanuc I, tailstock, too setter probe, 2023
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Daewoo Doosan
Model: PUMA-5100B
Year: 2023
24" Chuck, The 2023 Doosan 5100B CNC Lathe with Fanuc I-Series Control is a heavy-duty horizontal turning center built for precision machining of large, complex parts. Ideal for heavy cutting, turning, drilling, and threading of tough materials like steel and titanium. Perfect for oil & gas, aerospace, automotive ...more
Glaston #RC200-2136-380-L, Tempering Furnace, Right-handed, 83" x 142" max. glass size, 0.16"-3/4" thickness, 2015
Ex-Factory | Charlotte, NC
Category: Glass Tempering Furnaces & Kilns
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Glaston
Model: RC200-2136-380-L
Year: 2015
GLASTON - RC200-2136-380-L: Flat Tempering Furnace for Low-E Glasses; 2,100 x 3,600 mm (83" x 142")Suitable for flexible production of all glass types.Utilizes Optimized Heating System with: Top convection.Ideal for mixed production; the unique optimized heating system with: Temperature profiles & convection allow ...more
24" x 48" Acer #AGS-2448A11D, horizontal surface grinder, 20" x 5" x 2" wheel, overhead wheel dresser, 1997
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acer
Model: AGS-2448A11D
Year: 1997
SERIAL. 97040395, MODEL. AGS-2448A11D, YEAR NEW. 1997, CHUCK SIZE. 24-3/4 x 48-1/2", HEIGHT UNDER NEW WHEEL (OVER TABLE). 33", LONGITUDINAL TABLE TRAVEL. 51-1/4", CROSS TRAVEL. 24-1/4", HYDRAULIC TABLE TRAVEL. 16 TO 80 FPM, INCREMENTAL DOWNFEED RATES (6).001"PER REVOLUTION, POWER SPINDLE ELEVATIONS. YES, WHEEL SIZE. ...more
JUST ADDED!
Rtv-108 #8935-002, MOMENTIVE RTV-108 8935-002 SILICONE ADHESIVE SEALANT
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Rtv-108
Model: 8935-002
This listing is for a Used MOMENTIVE RTV-108 8935-002 Silicone Adhesive Sealant., RTV108 is a one-component, ready-to-use silicone rubber adhesive sealant that cures at room temperature upon exposure to atmospheric moisture. It forms a tough, durable, resilient silicone rubber and is ideal for bonding, sealing, and ...more
15 KV Pwl Pv Indoor Switchgear Unused Surplus Instrument Compartment, 3000 Amps Breaker Compartment
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Manufacturer Powell Electric Product Family PV Type of Medium Voltage Indoor Vacuum Switchgear PV Switchgear Voltage 15000 Main Bus Amps 4000A Tie Bus Amps 4000A Main/Tie Sections 1 Switchgear Control Switch Circuit Breaker Control Switchgear Control Switch Mechanism Operated Control Switchgear Control Switch Truck ...more
Eurotech #B446-SY2-RBT2-TROFEO, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, 12' barfeed, Fanuc 31iB, 2020
Scott Machinery & Supply Inc | Helena, AL
Category: CNC Lathes and Turning Centers
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Eurotech
Model: B446-SY2-RBT2-TROFEO
Year: 2020
Fanuc 31iB CNC Control, Tri-Mist 850 G2 Mist Collector, 12 Foot Edge Patriot 551 Magazine Barfeed, LNS Magnetic Chip Conveyor in addition to Standard Chip Conveyor (2 chip conveyors included), 1000 PSI HP Dual Pump Coolant System, Coolant Thru Sub-Spindle, Royal QG-65 Main Spindle Collet Chuck, Royal QG-42 Sub-Spindle ...more
No. 2A Warner & Swasey, M3470, square head turret lathe, 20" swing, 3-jaw 16" chuck, 40 HP
Yoder Machinery Sales | Holland, OH
Category: Saddle Turret Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Warner & Swasey
Model: 2A
SERIAL. 21751876, MODEL. 2A (M-3470) SQUARE HEAD, SWING OVER BED. 20", SWING OVER CARRIAGE HORN. 16-3/4", DISTANCE TURRET FACE TO SPINDLE. 51-1/2", SPINDLE SPEEDS. (32) 22 TO 1117 RPM, CROSS FEEDS. (16).002 TO.073 IPR, LONGITUDINAL AND TURRET FEEDS. (16).004 TO.149 IPR, TRAVEL OF CROSS SLIDING TURRET. 14-1/2", CROSS ...more
Komo #VR-512, CNC router, 15 HP, drilling on X and Y-Axis, 8 position rotary tool changer, 2000
Carolina Machinery Sales | Monroe, NC
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Komo
Model: VR-512
Year: 2000
Approx 15 HP main router motor, drilling on X and Y axis, moving table on x axis with tooling located in bridge and moves on Y axis., 8 position rotary tool changer, 40 HP vacuum pump included, 480 volt 3phase.
JUST ADDED!
Mazak #Integrex-100-IVS, CNC Lathe, 21.5" Swing, 29.7" Cutting length, 6" Chuck, 1.7" Bar, 10/15 HP, 6000 RPM, 20-Tool Magazine, 2006
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: INTEGREX 100-IVS
Year: 2006
2006 Mazak Integrex 100-IVS CNC lathe. Featuring a 6" chuck, 21.46" max swing, and 29.65" cutting length. Y and B axis controls, auto tool eye., Standard Chuck Dia. Main Spindle (L) - 6", standard Chuck Dia. Second Spindle (R) - 6", Maximum Swing - 21.46", NOTE: Tool eye body may limit max. Swing., Maximum Swing using ...more
Falling film vacuum evaporator plant, Anhydro, 14330 lbs./hr, w/ CIP, 2 serial mechanical vapor recovery units
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
used- rebuild anhydro falling film vacuum evaporator. complete anhydro falling film vacuum evaporator with mechanical vapour recompression units was originally designed as a tvr evaporator and in operation for milk concentration in a norwegian dairy. this evaporator plant was relocated and redesigned by bontech a/s ...more
Allied Systems Company LT NGR LED, Light Tower, S/N: 37-000165, 2021
Wheeler Machinery - Cat | Salt Lake City, UT
Category: Light Towers
Seller: Wheeler Machinery - Cat
Location: Lindon, UT
Mfr: Allied Systems Company
Model: LT NGR LED
Year: 2021
13" TIRES AND WHEELS, 23 FT. 6-SECTION HYDRAULIC TOWER, 3 KW 5.8 HP, 4-LED LIGHTS, 48 GALLON POLYETHYLENE FUEL TANK, 51,122 LUMENS PER LAMP, LIFTING EYE, PRICED 12.13.21 JLS (ALLMAND), STOP/TURN/RUNNING LIGHTS, THREE POINT STABILIZER DESIGN, TIE DOWN RINGS, YANMAR ENGINE.
1200 Amp, SIEMENS, 5GMI-350-1200-78, 4160 Volts, 120 VAC CLOSE & TRIP, electrically operated, D/O:1
Belyea Company Inc | Easton, PA
Category: Medium Voltage Air Circuit Breakers
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Siemens
Model: 5GMI-350-1200-78
Year: 1995
CB-16567, ONE (1) 1200 AMP SIEMENS 5GMI-350-1200-78 VACUUM BREAKER, 4160 VOLTS, RATED MAXIMUM VOLTAGE 4760, RATED SHORT CIRCUIT 41 KA, 60 HERTZ, VOLTAGE RANGE FACTOR K 1.19, 60 KV BIL, 104-127 VAC CLOSE & TRIP, 78 KA CLOSE & LATCH, ELECTRICALLY OPERATED, DRAW-OUT, S/N R-32371A-1, MFG. 1995, 51 OPERATIONS.
Mazak #Integrex-300IVS, CNC lathe, 30" swing, 10" chuck, 3" bar, coolant thru milling head, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: INTEGREX-300IVS
Year: 2010
Mazak Integrex 300IVS Lathe, Main Spindle Chuck 10″, Maximum Swing 30″, Maximum Cutting Diameter 30″, Maximum Machining Length 60″, Maximum Bar Size 3″, Main Spindle HP 40 HP, Main Spindle RPM 4000 RPM, Main Spindle Nose A2-8, Main Spindle Bore 3.46″, Main Spindle Min. Indexing ...more
Hyundai Wia #L230LMSA, multi-axis CNC lathe, Fanuc 32iA, 21.7" swing, 2.6" bar, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-230LMSA
Year: 2012
Hyundai Wia L230LMSA Multi-Axis CNC Lathe (subject to buyer verification):Main Spindle Turning Diameter Max:12.200″Main Spindle Turning Length Max: 20.500″Main Spindle Chuck Diameter: 8.300″Main Spindle Max Swing: 21.700Main Spindle Bar Diameter Max: 2.600″Main Spindle 1: RPM: 4,000 HP: ...more
Okk #HM-600 8 APC, horizontal machining center, 160 automatic tool changer, 30.7" X, 29.5" Y, 31.5" Z, 12000 RPM, #50, 40 HP, Fanuc 31i-A5, thru spindle coolant, 2011
Machnet | Santa Monica, CA
Category: Horizontal CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Okk
Model: HM-600
Year: 2011
OKK HM600 8APC CNC Horizontal Machining Center, OKK HM600 8APC CNC Horizontal Machining Center, New: 2011, Travels:, X-Axis: 30.71", Y-Axis: 29.53", Z-Axis: 31.50", Pallet Size: 24.8" x 24.8", Pallet Stations: 8, Pallet Indexing: 0.001 Degree, Max Work Weight: 1540 Lbs, Spindle Taper: CAT 50, Spindle Speed: 12,000 ...more
JUST ADDED!
Ashland, Pallet Conveyor, 51" W x 10' L
Carolina Machinery Sales | Monroe, NC
Category: Pallet Nailers and Pallet Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Ashland 51"W x 10'L Pallet Conveyor, - Condition: Used / Like New in working condition, tested., - Drive Type: Chain drive, - Motor & Gearbox: 1Hp motor 208/230/460V 3PH, - Frame Width: 58-1/4" Overall., - Between Frame Width: 51-1/2" (50" Rollers width), - Roller Diameter and Spacing (Centers): 2.5" on 3" ...more
Grifo #F-36-CN2A, drill & router sharpening machine, 7-7/8" stroke, 10-1/4" length, 9-7/8" tool diameter, 1998
Ex-Factory | Charlotte, NC
Category: Saw Sharpeners
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Grifo
Model: F-36-CN2A
Year: 1998
GRIFIO F 36 Profile Gringer for Finger Jointer HeadManually operating wet grinding machine for drill bits, router bits, finger jointer and router heads with irregular shapes. -- Max. tool dia. 9-7/8" (250 mm), max. stroke: 7-7/8" (200 mm), Max. length of tools: 10-1/4" (200 mm). -- Main motor 1,5 HP (1,1 kW),machine ...more
Mazak #Integrex-400-IIIST, 5-Axis CNC Lathe, 24.8" X, 4.53" Y, 62.4" Z, 33.6" swing, 60" cutting length, 12" main spindle chuck, 35/40 HP, 4000 RPM, 40 ATC, 2004
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: INTEGREX-400-IIIST
Year: 2004
2004 MAZAK INTEGREX 400-III ST, a used 5-axis CNC lathe with 33.5" swing and 60" machining length. s 12" main spindle chuck, max RPM of 3,300, and second spindle up to 4,000 RPM. 40 ATC, no tailstock., Standard Chuck Dia. Main Spindle (L). 12", Standard Chuck Dia. Second Spindle (R). 10", Maximum Swing. 33.5", Maximum ...more
24" x 24" x 1" Perrin, horizontal, Stainless Steel, side bar plate & frame filter press
Frain Industries | Carol Stream, IL
Category: Plate and Frame Filter Presses
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Perrin
Perrin / Evoqua Water Technologies, horizontal, stainless steel, side bar plate and frame filter press. Volumes of product per hour – depending on materials, application and machine configuration. (50) 24" x 24" x 1" square cake plates with cake capacity of 16 ft³ and (51) 24" x 24" ...more
JUST ADDED!
Mazak #Quick-Turn-200MS, Mazatrol Smooth G Control, 26.6" swing, 2.6" bar, 14.75" cutting diameter, 22.7" machining length, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: QUICK-TURN-200MS
Year: 2020
Mazak Quick Turn 200MS / QT200MS / QT-200MS, Maximum Swing: 26.6″, Maximum Cutting Diameter: 14.75″, Maximum Machining Length: 22.7″, Maximum Bar Size: 2.6″, Main Spindle HP: 35 HP, Main Spindle RPM: 5000 RPM, Number of Tool Stations: 12, 2nd Spindle HP: 10 HP, Machine Weight: 12,500 lbs. ...more
JUST ADDED!
Grizzly #G0932, CNC Router, 4' x 8' table, 4 HP HSD Spindle, 4th Axis Rotary, Vacuum Table, RichAuto DSP, NEW
Revelation Machinery | Chicago, IL
Category: CNC Routers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Grizzly
Model: G0932
Year: 2025
Make: Grizzley, Model: G0932, Year: 2025, Machine Location: Pennsylvania, This Grizzly G0932 CNC router is a 4′ x 8′ CNC routing system designed for sheet processing, sign making, woodworking, plastics, and rotary axis machining. The machine s 4 HP HSD air-cooled spindle, 4-zone vacuum table, and rotary ...more
Mazak #Multiplex-6200YB, 8-Axis, Fusion 640T Control, with gantry, 12.5" swing, 10" chuck, 2010
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: MULTIPLEX-6200YB
Year: 2010
MAZAK MULTIPLEX 6200YB with Gantry, MAX SWING 12.5″, TURNING DIA 10.24″, MACHINING LENGTH (SHAFT WORK) 21″, MACHINING LENGTH (CHUCK WORK) 7″, # AXIS 8, CHUCK SIZE (MAIN) 10″, CHUCK SIZE (SUB) 10″, THROUGH SPINDLE HOLE (MAIN) 2.95″, THROUGH SPINDLE HOLE (SUB) 2.95″, POWER ...more
Mazak #Cybertech-4500M, CNC Lathe, 33.8" Swing, 21" Chuck, 5.5" Bar, 31.88" Turn diameter, 120" Cut length, 50 HP, 1600 RPM, 12-Position, 2010
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: CYBERTECH 4500M
Year: 2010
21" Chuck| 122" between centers| Hydraulic Steady rest| Deep Boring bar option, Maximum Swing : 33.88", Max Turning Diameter: 31.88", Maximum Cutting Length: 120", Main Spindle Bore/Max Bar Capacity : 5.5", Maximum Swing over Cross Slide: 27.5", X-Axis Travel: 21.375", Z-Axis Travel: 123.25, W-Axis Travel: 100.39" ...more
JUST ADDED!
Mazak #Integrex-J200, CNC Lathe, 20.9" Swing, 19.7" Machining length, 8" Chuck, 2.6" Bar, 19.7" Turning diameter, 15 HP, 5000 RPM, 36 ATC, 2013
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: INTEGREX J200
Year: 2013
Used Multi-Axis CNC Lathe: Swing 20.87", Max RPM 5,000, 8" Chuck, B-Axis 12,000 RPM. MAZATROL MATRIX, Capto ATC 36, Hydraulic Chucks, and Chip Conveyor., MAX TURNING DIAMETER 19.69", MAXIMUM CUTTING LENGTH 19.69", X-AXIS TRAVEL 17.72", Z-AXIS TRAVEL 21.65", Y-AXIS TRAVEL 7.87", C-AXIS INDEXING 0.001 deg, MAIN SPINDLE ...more
200 Ton, Clearing #S2-200-72-36, straight side double crank stamping press, 12" stroke, 30" Shut Height, 6" adj., 20 SPM, air clutch, #12979
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Clearing
Model: S2-200-72-36
Year: 1979
SERIAL. 51-1003 CONSTRUCTION. TIE ROD FRAME MODEL. S2-200-72-36 CAPACITY. 200 TON STROKE OF SLIDE. 12" POWER SLIDE ADJUSTMENT. 6" SHUT HEIGHT. 30" AREA OF BED & RAM. 72" X 36", BED BOLSTER SIZE. 72" X 36" X 6" THICK, BOLSTER THREADED HOLES. YES STROKES PER MINUTE. 20, CUSHIONS. YES, 2, CUSHION TRAVEL. 6", CUSHION ...more
Daewoo Doosan #Puma-2000SY, Multi-Axis CNC Turning Center, 23.6" swing, 33.8" between centers, 13" turning diameter, 9.8" X, 3.94" Y, 22.8" Z, 20 HP, 5000 RPM, 12-tool, Fanuc 18iTB, 2008
Machinery Values Inc | Harrison, NJ
Category: CNC Lathes and Turning Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Daewoo Doosan
Model: PUMA-2000SY
Year: 2008
DOOSAN PUMA 2000SY MULTI-AXIS CNC TURNING CENTERNEW: 2008 VIDEO LINK: https://youtu.be/SFn-KJUPCp8?si=usVTCp-f7Y-k0m6bCAPACITY:Swing over bed… 23.6"Swing over carriage… 21.6"Maximum bar capacity… 2.625"Maximum turning diameter, main spindle… 13.0"Distance between ...more
Featured
Warner & Swasey / Bardons & Oliver (B & O) #3SC, lathe, Fanuc 0iTD, like new
Automated Controls Systems | Houston, TX
Category: CNC Chucker Lathe
Seller: Automated Controls Systems
Location: Houston, TX
Mfr: Warner & Swasey
Model: 3 SC
Warner Swasey 3SC / Bardons & Oliver (B&O) 3SC, LIKE NEW, Full retrofit in 2012 by Bardons & Oliver, Fanuc 0iTD control, Under power in our Houston Tx warehouse, Chuck Size: 24", Maximum Swing Diameter Over Turret Bar: 39-7/8", Maximum Swing Diameter Over Turret Face: 18-7/16", Longitudinal Work Area: 33-5/8" ...more
175 gallon Lee #175U9MS, Double Motion Vacuum Kettle, 304 Stainless Steel, 48" diameter x 22" straight side, dish top cone bottom, 20 psi @300°F, jacket 100 psi @338°F, 2 HP agitator, 1998
Federal Equipment Company | Cleveland, OH
Category: Kettles (Food Based)
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Lee
Model: 175U9MS
Year: 1998
Used 175 gallon Lee double motion kettle, 304 stainless steel construction, 48" diameter x 22" straight side, removable dish top, cone bottom, rated 20 psi at 300 f, jacketed for 100 psi at 338 f, double motion agitator driven by 2 hp motor drive, on legs, serial# C6539-A1, national board# 7437, built 1998.
Mizar #PRP-L1-Pro-Line, wire granulator, 2026
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Model: PRP-L1-PRO-LINE
Year: 2025
MIZAR - CMT PRP L1 - Pro-line: Wire Granulation LineSingle-shaft Shredder provides precrushing for all insulated: Cables, radiators, and mixed wires.Shredder separates the material into: Smaller pieces, making it ideal for the granulator. -- Overbelt Magnetic Separator: Separates magnetic metals from materials ...more
20 Ton, Press Master #CFP20T, hydraulic press, 12" stroke, 10" throat, 18" daylight, foot pedal
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP20T
20 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-20T… S/N 122205230323COMPLETELY REMANUFACTURED BY PRESSMASTERWITH ALMOST ALL INTERNAL COMPONENTS REPLACEDPRACTICALLY LIKE NEW PRESSES TONS OF FORCE.(MAX). 20 TONSSPEED (IPM).(APPROACH/pressing). 172/51RETURN SPEED. 248TABLE.(LR X FB). 20" X ...more
24" x 85" Cemco, Heavy Duty Belt Sander, powered conveyor, manual table height adjustment
N S Machine Corp. | Granger, IA
Category: Belt Sanders
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Cemco
, Manufacturer: Cemco, Stock Number: 13856, s:, Powered conveyor, Manual table height adjustment, Belt width - 24”, Belt length - 85”, Table height adjustment - 11”, Main motor - 10 HP / 1750 RPM, Volts - 230/460, Phase - 3, Cycles - 60, Amps - 26.2/13.1, Conveyor motor - 1 HP, Approximate dimensions ...more
25" x 240"/8' Lodge & Shipley #RXE2516, dual side hollow spindle engine/boring lathe, 1962
Mohawk Machinery Inc | Cincinnati, OH
Category: Oil Field and Hollow Spindle Lathes
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Lodge & Shipley
Model: RXE2516
Year: 1962
25" X 240/96" (20'/8') LODGE & SHIPLEY "RXE2516" DUAL-SIDE HOLLOW-SPINDLE, ENGINE/BORING LATHE, NEW 1962, SERIAL NO 45031, MODEL RXE2516, 25" X 240/96" (20'/8') LODGE & SHIPLEY "RXE2516" DUAL-SIDE HOLLOW-SPINDLE, ENGINE/BORING LATHE, NEW 1962, SERIAL NO 45031, MODEL RXE2516, LEFT HAND SIDE ...more
JUST ADDED!
88 Ton, Amada #RG-80, CNC Press Brake, 94.5" bed length, 80.7" between uprights, 98.6" max. bending length, 14.57" open height, 3.94" stroke, 1.7' throat depth, 460 Volt, 2003
Lenmark Industries | Langley, BC
Category: CNC Press Brakes
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Amada
Model: RG-80
Year: 2003
SKU: 152843, Model: RG-80, Year: 2003, Condition: Used, S/N: 812312, Bed Length: 94.5", Tons: 88 ton, Brake Type: Hydraulic, CNC: Yes, Electrical :, Voltage: 460 volts, Phase: 3-phase, Made In: JAPAN, Dimensions: 82.00 (H) x 57.00 (W) x 99.00 (L) inches, Additional :, It is CNC but you can use it in manual. ...more
12000/16000/20000 kVA, 67000 Delta Primary, 12470/7200 Wye Secondary, MCGRAW EDISON, LTC Substation
Belyea Company Inc | Easton, PA
Category: 60 Hz Three Phase Transformers
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Delta
ONE (1) 12/16/20 MVA MCGRAW EDISON LOAD TAP CHANGING TRANSFORMER, 3 PHASE, 60 HERTZ, CLASS OA/FA/FA, 65 DEGREE C RISE, 7.5% IMPEDANCE, COPPER WINDINGS, SIDE MOUNTED LV, TOP MOUNTED HV AND SIDE MOUNTED NEUTRAL, BUSHINGS, DRAIN & SAMPLE VALVE, DIAL TYPE THERMOMETER, LIQUID LEVEL GUAGE, PRESSURE RELIEF DEVICE ...more
16-1/4" x 16-1/4" Daito #GA410W, semi-automatic band saw, 0.05" x 1.25" x 15" blade, 69-551 FPM, 1991
Aleco Machinery Sales | Milwaukee, WI
Category: Horizontal Band Saws
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Daito
Model: GA410W
Year: 1991
(1) PRE OWNED 1991 daITO MODEL GA410W SEMI-AUTOMATIC BAND SAW, SERIAL NUMBER: 13KL1-1, BLADE SIZE 0.05” X 1.25” X 15”, CUTTING CAPACITIES, ROUNDS 16 ¼”, FLATS 16 ¼” X 16 ¼”, BUNDLES 16 1/4” X 8 5/8”, BLADE SPEEDS (VARIABLE) 69- 551’ PER MINUTE ...more
JUST ADDED!
Mazak #INTE100-4S, CNC Multi-tasking Turning Center, 6000 RPM, 7.5 HP, 40 ATC, Matrix cnc, Chip Conv., 17488 hours, 2007
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mazak
Model: INTE100-4S
Year: 2007
Make: Mazak, Model: INTE100-4S, Year: 2007, Machine Location: Tennessee, X-Axis: 16.14″, Y-Axis: ±2.76″, Z-Axis: 31.69″, W-Axis (Sub-Spindle): 31.3″, B-Axis (Milling Head): 225° (-30° To +195°), Main Spindle, Chuck Size: 6″, Max Speed: 6,000 Rpm, Motor Power: 15 Hp, Bar ...more
38" x 120" Poreba #TPL-90/M, hololow spindle lathe, 28" chk, 4-jaw, 12-1/2"hole, 5-250 RPM, forward & reverse jog, Steady Rest, taper attachment, 4-way rapid traverse
Yoder Brothers Machinery | Toledo, OH
Category: Oil Field and Hollow Spindle Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Poreba
Model: TPL-90/M
Serial. 0781197-031, Model. TPK-90/3M, Swing Over Bed. 38", Swing Over Carriage. 25-1/2", Distance Between Centers. 120", *** Spindle Hole ***. 12 1/2", Spindle Nose. A1-20", Chucks, Front & Rear. 28" - 4-Jaw, Spindle Speeds. (18) 5 - 250 RPM, Spindle Jog Button. Yes, Forward & Reverse, Spindle Stop Button. ...more
Sharp #UH-3, horizontal mill, 12" x 63" table, coolant, #50 NS, 35-1382 RPM, 2019
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Sharp
Model: UH-3
Year: 2019
SERIAL. 2H334\, MODEL. UH3, YEAR NEW. 2019, AREA OF TABLE (T-SLOTTED). 12" X 63", WORKING SURFACE. 51-3/16" X 11-13/16", SPINDLE SPEEDS. 35 TO 1382 RPM, LONGITUDINAL AND CROSS FEEDS. 1/2" TO 24-7/8 1PM, VERTICAL FEED. 1/2" TO 24-7/8 IPM, LONGITUDINAL TRAVEL. 37-3/8", CROSS TRAVEL. 14-13/16", VERTICAL TRAVEL. 18-1/2" ...more
JUST ADDED!
Miyano #BNX-51MSY, CNC Turning Center, 2" bar, 5.9" L max, 5k RPM, 20 HP, 12 tool, Live Milling, Y-Axis, Sub Spindle, Bar Feed, Chip Conv., 2017
Machinesused.com | Minneapolis, MN
Category: CNC Lathes and Turning Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Model: BNX-51MSY
Year: 2017
The Miyano BNX51MSY CNC lathe is a high-precision, twinspindle turning center designed for complex part production and bar-fed, high-volume manufacturing. Featuring main and subspindles, Yaxis capability, and live tooling, the BNX51MSY delivers exceptional flexibility and accuracy in a compact footprint. This model is ...more
3000 Amp 72.5kV Siemens SF-6 Breaker, SPS2-72.5-40-2, 40kA Short, 125 VDC C+T
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Model: 40KA SHORT
3000 Amp Siemens SF-6 Circuit Breaker, 72.5kV max, SPS2-72.5-40, 350kV BIL, Voltage Factor K 1.0, 3 Cycle Interrupt, 125 VDC Close and Trip, FA2.20 Mechanism, 120 Vac Motor, 6x MRCTs BYM Type 2000:5, 65 PSIG Norm Operating Pressure, 57 PSIG Alarm Pressure, 51 PSIG Min Operating Pressure, Total Weight: 3600lbs, Weight ...more
3000 Amp 72.5kV Siemens SF-6 Breaker, SPS2-72.5-40-2, 40kA Short, 125 VDC C+T
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Model: 40KA SHORT
Year: 2002
3000 Amp Siemens SF-6 Circuit Breaker, 72.5kV max, SPS2-72.5-40, 350kV BIL, Voltage Factor K 1.0, 3 Cycle Interrupt, 125 VDC Close and Trip, FA2.20 Mechanism, 120 Vac Motor, 6x MRCTs BYM Type 2000:5, 65 PSIG Norm Operating Pressure, 57 PSIG Alarm Pressure, 51 PSIG Min Operating Pressure, Total Weight: 3600lbs, Weight ...more
Duplo #3500-Booklet-Maker/445-Feeder, Booklet Maker, 3000 A5 Saddle-stitched Booklets/hr., 9000 Collated Sets/hr., 50 Sheets/min Feed, 2018
Revelation Machinery | Chicago, IL
Category: Paper Saddle Stitchers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Duplo
Model: 3500-BOOKLET-MAKER/445-FEEDER
Year: 2018
Make: Duplo, Model: 3500 Booklet Maker / 445 Feeder, Year: 2018, Machine Location: Illinois, Booklet Maker, Max Speed: Up to 3,000 A5 saddle‑stitched booklets per hour, and up to 9,000 collated sets per hour, Sheet Range: 1–20 sheets per booklet, Paper Thickness:, Sheets: 110–350gsm ...more
Sharp #UH3, manual heavy duty vertical/horizontal milling machine, 11-13/16" x51-3/16" table
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: UH3
Heavy Duty UH3 Vertical/Horizontal Mill, Model: UH3, Manufacturer: SHARP, Serial # 2H125, TABLE:, WORKING SURFACE: 51 3/16 in X 11 13/16 in, TRAVEL: 37 3/8 in X 14 13/16 in X 18 1/2 in, T-SLOT (NOMINAL SIZE X NO. X PITCH) : 5/8 in X 3 in X 2 3/4 in, FEEDS, VERTICAL (12 STEPS): 1/4 – 12 7/16 IPM, FEEDS ...more
Marathon #TS-2000, comparator, 9" ram cylinder bore, 190900 lb ram force, 34 psi
Alan Ross Machinery Corp | Zion, IL
Category: Scrap Crushers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Marathon
Model: TS-2000
Main Ram Cylinder Bore: 9 in., Main Ram Force: 190,900 lb., The Marathon TS-2000 is said to provide maximum payloads by carrying out compaction in the charge box using the company's Automatic Density Regulator system, The Marathon TS-2000 is said to provide maximum payloads by carrying out compaction in the charge ...more
JUST ADDED!
Mazak #SQT-15MS, turning center, T-Plus Control, sub spindle, live milling, 1996
McKean Machinery Sales Inc | Cleveland, OH
Category: CNC Lathes and Turning Centers
Seller: McKean Machinery Sales Inc
Location: Cleveland, OH
Mfr: Mazak
Model: SQT-15MS
Year: 1996
Item #: CB5125 MAZAK SQT15MS TURNING CENTER, -- SERIAL: 120719 -- SUB-SPINDLE -- LIVE MILLING -- T-PLUS CONTROL -- AGE: 1996 -- 8" MAIN CHUCK, 6" SUB CHUCK -- CHIP CONVEYOR -- 3 - LIVE TOOL HOLDERS PRICE: FOB CLEVELAND, OH - - - $16,350.
2.2 KIP, ITS #1000-16, vibration system with power amplifier
Frank Bacon Machinery Sales | Warren, MI
Category: Universal Fatigue Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Its
Model: 1000-16
2.2 KIP ITS-1000 Vibration System with Power Amplifier, (1) New Frank Bacon, Model ITS-1000 2,200 lbf (9.8 kN) Electrodynamic Vibration Test System with Power Amplifier., Frank Bacon Model ITS-1000 Vibration System, Sine - Force Rating: 9.8 kN (2,200 lbf), Random - Force Rating:9.8 kN (2,200 lbf), Shock Peak -Force ...more
Mazak Smooth #Integrex-i200ST, CNC turning center, Mazatrol PC Fusion Control, 25.9" swing, 2.6" bar, 2017
Inter-Plant Sales | Hugo, MN
Category: CNC Lathes and Turning Centers
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Mazak
Model: INTEGREX-I200ST
Year: 2017
Mazak Smooth Integrex i-200 ST CNC Turning Center, Model Integrex i-200 ST, S# 283350, Date Mfg. 11/2017, Mazatrol PC-Fusion-CNC control, Max swing 25.91", Main spindle bore 3", Max bar work 2.6", Max machining length 39.8", X-Axis travel 24.21", Y-Axis travel 9.84", Z-Axis travel 42.40", W-Axis travel 40.39", Main ...more
125 Amps, Siemens #WMM51125, Power Mod Modular Metering System Meter Stack, 240 VAC
OK Sales Inc | Burlington, NC
Category: Electric Meter Sockets
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Siemens
Model: WMM51125
Siemens WMM51125 Power Mod Modular Metering System Meter Stack 125 A 240 VAC, Brand: Siemens MPN: WMM51125Model: Power Mod Type: Modular Metering System / Meter StackMain Bus Rating: 1200A MaxBranch Rating: 125 Amp Max240 VAC5 Meter PositionsRing Type Cover.
Milltronics #ML-26/40, CNC combo lathe, Centurion 7 Control, 27" swing, 16.1" swing over cross slide, 3-jaw 12" chuck, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Milltronics
Model: ML-26/40
Year: 2007
Milltronics ML26/40 CNC Combo LatheCNC Lathe (subject to buyer verification):Swing Over Bed: 27″Swing Over Cross Slide: 16.1″Swing Over Gap: 34.2″Gap Distance: 12.75″Bed Length: 40″Spindle Bore: 4″Spindle Speed: 1,600 RPMSpindle Nose: A1-11X – Axis Travel: 13″Z – ...more
Vecoplan #RG52-40, Grinder, 40 HP
Carolina Machinery Sales | Monroe, NC
Category: Wood Grinders and Hogs
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vecoplan
Model: RG52-40
Refurbished Vecoplan RG52-40 Grinder, 40 HP Main Motor, 52" Opening, Refurbished with warranty - Ready to ship!.
Mazak #Slant-Turn-50N, heavy duty CNC lathe, Mazatrol Fusion 640T, 32" swing, 2.5" bar, 2006
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: SLANT-TURN-50N
Year: 2006
Mazak Slant Turn 50N Heavy-Duty CNC Lathe / SL50N (subject to buyer verification): Maximum Swing………………………. 32.” Swing Over Carriage…………………. 22″ Maximum Cutting Diameter: Chucking……. 26″ Shaft ...more
OKK #MDH-5V, vertical mill, 18" x96" table, 30 HP, #50 NS, power draw bar, #76388
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MDH-5V
SERIAL. 819, MODEL. MDH-5V, WORKING SURFACE OF TABLE. 96" X 18"0 RPM, SPINDLE SPEEDS. (23) 18 TO 1800 RPM, LONGITUDINAL & CROSS FEEDS. 3/8 TO 84 IPM, VERTICAL FEEDS. (32) 1/8 TO 84 IPM, LONGITUDINAL TRAVEL. 51-1/8", CROSS TRAVEL. 15-3/4", VERTICAL TRAVEL OF KNEE. 15-3/4", VERTICAL HEAD TRAVEL. 5-7/8", SPINDLE NOSE ...more
52" Timesavers #3341-45-1333, Orbital Sander, 4-Head, 6" thick, 15-45 FPM, 9450 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 3341-45-1333
Timesavers Model 3341-45-1333 Four Head 52" Orbital Sander : Abrasive size combination head: 52" x 103" Main motors: 30, 7.5, 7.5, 7.5HP Maximum width stock: 51" Minimum part length with vacuum bed: 6"x6" Maximum thickness opening: 6" Infeed loading area: 24" Feed speed: 15-45 FPM Approximate full load amps at 460 ...more
1200 Amp, AREVA, EOX-15, 15000 Volts, SUBSTATION VACUUM BREAKER
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Areva
Model: EOX-15
Year: 2008
CB-19716, ONE (1) 1200 AMP AREVA VACUUM BREAKERS, TYPE EOX-15, 15 KV MAX, 3.0 CYCLE INTERRUPTING, 20 KA INTERRUPT, 1.0 RATED K FACTOR, 3 SEC SHORT TIME, 110 KV BIL, 6.25 KA OUT OF PHASE, (6) 1200/5 MRCT'S, C400, TCA3-1200M2, 10 KV BIL, M5SM SPRING TYPE MECHANISM, 240 VAC MOTOR, 48 VDC CLOSE AND TRIP, INSTR BOOK: ...more
Ganesh #Cyclone-32CS, 7-Axis, 1.25", (27) total tools,chip conveyor,parts conveyor, 10 HP, 2008
Mohawk Machinery Inc | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Ganesh
Model: CYCLONE-32CS
Year: 2008
1.25" GANESH "CYCLONE 32CS" 7-AXIS TWIN-SPINDLE CNC SWISS TYPE MILL/TURN CENTER W SUBSPINDLE, C & Y AXIS, New 2008, Serial No CB970408, Model Cyclone 32CS, 1.25" GANESH "CYCLONE 32CS" 7-AXIS TWIN-SPINDLE CNC SWISS TYPE MILL/TURN CENTER W SUBSPINDLE, C & Y AXIS, New 2008, Serial No CB970408, Model Cyclone 32CS ...more
18"/25" x 45" YCM Supermax #LG-1845, engine lathe, 11.3125" swing over cross slide, 12" 3 & 4 jaw chuck, 2.25" bore, 30-2000 RPM, inch/metric, Accurite 2-Axis digital read out, tailstock, 1989
Great American Eqpt Co | Cincinnati, OH
Category: Sliding & Gap Bed Lathes
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Supermax
Model: LG-1845
Year: 1989
18" x 45" YCM SUPERMAX ENGINE LATHE, Model LG-1845, S/N R7804-008, New 1989, Stock# Q12230, 2-Axis Accurite DRO, 12" 3-Jaw Chuck & 12" 4-Jaw Chuck, Geared Spindle, Compound Cross Slide w/ 2-Sided Tool Post, Tailstock, Chip Pan, Built In Coolant Pump, Toolholders and Chuck Jaws Included., CATALOG : Max Swing Over ...more
Ganesh #Cyclone-32CS, 7-Axis dual spindle turn/mill center w/Y-Axis, 1-3/8" bar, 10 HP, 6000 RPM, 2016
Premier Equipment Inc | Altamonte Springs, FL
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Ganesh
Model: CYCLONE-32CS
Year: 2016
Ganesh Cyclone-32CS 7 Axis Dual Spindle Turn/Mill Center with Y-Axis on Main Spindle CNC Swiss Machine (subject to buyer verification):Bar Capacity 1-3/8” (1.375”)Main Spindle Motor 10 HPMain Spindle Speed 6000 RPMTools 27 Tools with 11 Driven Tools CapacityX Axis Travel (Main Spindle) 7.28″Y Axis ...more
JUST ADDED!
Mazak #Integrex-i200S, Mazatrol Matrix, 25.9" swing, 40" centers, 2.5" bar, 8" chuck, ATLM, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: INTEGREX-I200S
Year: 2011
Mazak Integrex i-200S, Maximum swing 25.90″, Turning Diameter 25.91″, Distance Between Centers 40″, Bar capacity 2.56, SPINDLE SPEED 50 ~ 5000 rpm, Main Motor 30 HP, Main Spindle C Axis, Sub Spindle 0.0001 Deg, Sub Spindle Speed 5000, Sub Spindle Motor 25 HP, Milling Spindle Speed 12000 RPM, Tool ...more
Mazak #Integrex-i200S, with Smooth Control, Low Hours, Gear Package, 36 ATC, Renishaw Probe, and Tooling
Tight Tolerance Machinery | Peoria, AZ
Category: CNC Lathes and Turning Centers
Seller: Tight Tolerance Machinery
Location: Peoria, AZ
Mfr: Mazak
Model: INTEGREX-I200S
Year: 2019
Mazak Integrex i-200S, NEW: 2019, MAX SWING.25.91", MAX TURNING DIAMETER.25.91", MAX TURNING LENGTH.39.8", X-AXIS TRAVEL.24.21", Z-AXIS TRAVEL.42.4", Y-AXIS TRAVEL.10.24", W-AXIS TRAVEL.41.97", MAIN SPINDLE BAR CAPACITY.2.56", MAIN SPINDLE CHUCK SIZE.8", MAIN SPINDLE SPEED.5,000 RPM, MAIN SPINDLE NOSE.A2-6, MAIN ...more
GMC #PL-20E, 20 gauge Gmc, 32 FPM, Pittsburgh attachment
Manufacturing Solutions | Santa Ana, CA
Category: Rollformers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: PL-20E
Lockformers26 GA - 20 GA26 GA - 20 GA26 GA - 22 GA26 GA - 20 GA5/16"32 FPM2 HP, 3 Phase, 10 AMP, 110 VAC36 x 23 x 43"H458 lbs..
Balemaster #EO-650, 48" x 30" x variable auto-tie horizontal baler, 25 HP, 8" cylinder, 46" x 50" hopper opening
Ex-Factory | Charlotte, NC
Category: Horizontal Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Balemaster
Model: EO-650
Year: 2000
BALEMASTER - EO-650: Horizontal Auto-Tie Baler : 25 HP Motor. 8"; Main Cylinder. Hopper Opening: 46";x 50";. Bale Size: 48"; x 30"; x (variable). Main Ram Face Pressure: 75 PSI. System Pressure: 2,000 PSI. Total Compression Force: 100,500 Lbs.
3000 Amp 72.5kV Siemens SF-6 Breaker, SPS2-72.5-40-2, 40kA Short, 125 VDC C+T
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Model: 40KA SHORT
Year: 2003
3000 Amp Siemens SF-6 Circuit Breaker, 72.5kV max, SPS2-72.5-40, 350kV BIL, Voltage Factor K 1.0, 3 Cycle Interrupt, 125 VDC Close and Trip, FA2.20 Mechanism, 120 Vac Motor, 6x MRCTs BYM Type 2000:5, 65 PSIG Norm Operating Pressure, 57 PSIG Alarm Pressure, 51 PSIG Min Operating Pressure, Total Weight: 3600lbs, Weight ...more
3000 Amp 72.5kV Siemens SF-6 Breaker, SPS2-72.5-40-2, 40kA Short, 125 VDC C+T
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Model: 40KA SHORT
3000 Amp Siemens SF-6 Circuit Breaker, 72.5kV max, SPS2-72.5-40, 350kV BIL, Voltage Factor K 1.0, 3 Cycle Interrupt, 125 VDC Close and Trip, FA2.20 Mechanism, 120 Vac Motor, 6x MRCTs BYM Type 2000:5, 65 PSIG Norm Operating Pressure, 57 PSIG Alarm Pressure, 51 PSIG Min Operating Pressure, Total Weight: 3600lbs, Weight ...more
3000 Amp 72.5kV Siemens SF-6 Breaker, SPS2-72.5-40-2, 40kA Short, 125 VDC C+T
Belyea Company Inc | Easton, PA
Seller: Belyea Company Inc
Location: Easton, PA
Model: 40KA SHORT
Year: 2002
3000 Amp Siemens SF-6 Circuit Breaker, 72.5kV max, SPS2-72.5-40, 350kV BIL, Voltage Factor K 1.0, 3 Cycle Interrupt, 125 VDC Close and Trip, FA2.20 Mechanism, 120 Vac Motor, 6x MRCTs BYM Type 2000:5, 65 PSIG Norm Operating Pressure, 57 PSIG Alarm Pressure, 51 PSIG Min Operating Pressure, Total Weight: 3600lbs, Weight ...more
JUST ADDED!
Daewoo Doosan #Puma-2000SY, CNC Lathe, 23.6" Swing, 8"/6" Chuck, 2.6" Bar, 13" Turning diameter, 20 HP, 45-5000 RPM, 12-Position Turret, 2008
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Daewoo Doosan
Model: PUMA-2000SY
Year: 2008
Used CNC Lathe, FANUC 18iTB, toolsetter, 8" & 6" hydraulic chucks, 12-position turret, and chip conveyor. s include 5,000 RPM spindle speed, Y-axis travel, and live toolholders., CAPACITY:, Swing over bed 23.6", Swing over carriage 21.6", Maximum bar capacity 2.625, Maximum turning diameter, main spindle 13.0" ...more
24" x .51" Kohler #KRM65.500/21B, 21 Roller(10 over 11), 4-Hi Precision Leveler, 2" diameter roll, 250 FPM, 1994
VX Machinery | Sylvania, OH
Category: Precision Levelers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Kohler
Model: KRM65.500/21B
Year: 1994
CAPACITY: 24" X.510" MAX (WIDTH X THICKNESS), CAPACITY: 12" X.669" MAX (WIDTH X THICKNESS), # OF ROLLS: 21 (10 OVER 11), WORK ROLL DIAMETER: 2", ENTRY PINCH ROLL: YES, PINCH ROLL DIAMETER: 6.5", CASSETTE TYPE ROLL DISCHARGE: YES, MAIN MOTOR HP: 50 HP, 3450 RPM, VOLTAGE 460, MAKE LENZE, LINE SPEED VARIABLE: 0 - 250 ...more
8' x 5/16" Bertsch #8L, initial pinch plate roll, 8-1/2" roll diameter, air drop end, rear roll adjustment
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bertsch
Model: 8L
SERIAL. M-9886, MODEL. 8L, CAPACITY. 5/16" MILD STEEL, OVERALL LENGTH OF ROLLS. 8', DIAMETER OF ROLLS. 8-1/2", REAR ROLL ADJUSTMENT. YES, AIR DROP END. YES, MOTOR. 10 HP MAIN MOTOR, MOTOR. 5 HP ADJUSTING MOTOR.
JUST ADDED!
550 Ton, Haitian #HDC550, die casting machine, 9.47-15.8 lb. shot size, cold chamber, showroom machine, new, 2023
Absolute Machinery Corp | Worcester, MA
Category: Die Casting Machines
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Haitian
Model: HDC550
Year: 2023
2023 Show Room Machine. Never put into production. Only used for dry cycle and control demonstrations., Clamping Force: 550 Metric Tons, Die Closing Stroke Mm: 580mm, Die Thickness Mm: 350mm min. - 850mm max, Platen Size Mm: 1,200mm x 1,200mm, Tiebar Spacing Hxv Mm: 755mm x 755mm, Tiebar Diameter Mm: 150mm, Injection ...more
475 KW Perkins Triton, trailer mounted diesel generator, enclosed, 480 Volts, low hours, 2005
Green Industrial LLC | Belgium, WI
Category: Diesel Generators
Seller: Green Industrial LLC
Location: Belgium, WI
Mfr: Perkins
Year: 2005
2005 Triton 475KW Enclosed Mobile Diesel Generator FUEL TANK BAD, Green Industrial purchased this trailer mounted generator from a company in Florida that no longer needed this generator for service. The generator was used in Florida for approximately 15 years and does not look pretty on the outside. The fuel tank is ...more
5000 kVA, 34500 Delta Primary, 4160/2400 Wye Secondary, SQUARE D Substation
Belyea Company Inc | Easton, PA
Category: 60 Hz Three Phase Transformers
Seller: Belyea Company Inc
Location: Easton, PA
Mfr: Delta
Year: 2011
T-6115, ONE (1) 5000 KVA SQUARE D SUBSTATION TRANSFORMER, 3 PHASE, 60 HZ, 6.35 % IMPEDANCE, 65 DEG C RISE, CLASS ONAN, AL WINDINGS, LIQUID LEVEL GAUGE, LIQUID TEMP GAUGE, VACUUM PRESSURE GAUGE, LIQUID PRESSURE GAUGE, PRESSURE RELEASE VALVE, DRAIN & SAMPLE VALVE, HV & LV FULL LENGTH ATC'S, SIDE-SIDE (ANTE ...more
Femco #B-5 Saw Ferry Industries precision CNC band saw, Proface CNC touchscreen interface, 2016
Equipment Hub | Decatur, GA
Category: Horizontal Band Saws
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Femco
Model: B-5
Year: 2016
Stock #: 191250003, Location: Huntsville, AL, Brand: Femco, Model: B-5 Saw, Serial #: F-1711, Year: 2016, Material Height: 36", Materials: Nomex, Kevlar, Aluminum, FRP Honeycomb, rigid and structural foams and other engineered materials up to 30 Lb density, Main Drive Motor: 10 HP, Proface CNC touchscreen ...more
Mazak #VC-500A/5X, CNC vertical machining center, 60 automatic tool changer, 21.8" X, 19.8" Y, 20" Z, 20000 RPM, #40, 20 HP, Smooth X, 2018
Used CNC LLC | Huntley, IL
Category: Vertical CNC Machining Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Mazak
Model: VC-500A/5X
Year: 2018
MAZAK VC 500A/5X CNC 5 Axis Machining Center, Model: VC 500A/5X Twin Pallet, 2018. Compact and efficient, ideal for complex machining tasks. Contact for more on this well-maintained, pre-owned equipment., 2018 MAZAK VC 500A/5X TWIN PALLET, Number Of Tables / Pallets. 2, Weight On Table. 440 lb, Main Spindle Horse ...more
JUST ADDED!
Cutler-Hammer #Magnum-DS, Low-Voltage Power Distribution Center/Switchgear Section, (1) 4000 amp main breaker, (5) 1200 amp feeder breakers, 3-pole, 600 Volt, 3PH, 2002, (2 available)
Lenmark Industries | Langley, BC
Category: Metal Enclosed Switchgear
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cutler-Hammer
Model: MAGNUM-DS
Year: 2002
SKU: 153871, Year: 2002, Condition: Used, Voltage: 600 volts, Frequency: 60 Hz, Phase: 3-phase, Amps: 4000 amps, Made In: UNITED STATES, Additional :, Main Breaker - 4000A (1 x unit), Model: MDS840, Series: Magnum DS, - Frame Size: 4000 Amp, - Poles: 3 Pole, - Voltage: 600V Class, - Interrupting Rating:, - 85 kA @ ...more
18" wide x 4.3' long, Stainless Steel, inclined cleated conveyor with 21" infeed height, 18" wide conveyor belt
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Inclined cleated conveyor, stainless steel. 21" infeed height, 18" wide conveyor belt with 3" high x 18" wide cleats set on 8" centers. Conveyor has 53" long bottom horizontal run, 48" long incline, 29" long top horizontal run and a 51" discharge height. Powered by a top ...more
Sunnen #MBB-1600, hone, cabinet with tooling
Liberty Machine Works | Preston, ID
Category: Horizontal Hones
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Sunnen
Model: MBB-1600
This Sunnen MBB1660 hone is well tooled and in excellent condition. It was removed from a small family job shop where it has been for decades. The previous owner is specializing and needed to make room and raise funds for new equipment., Located at our warehouse in Preston, Idaho, We care about the machines we sell ...more
150 KVA Eaton #PDU257709-001, Power Distribution Unit, (8) Main & Breakers, 480 x 208Y/120 V
Quantum Technology | Shippensburg, PA
Category: Power Distribution Units (PDU)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Eaton
Model: PDU257709-001
7 225A main 1 100A main 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll make it right., Shipping & Freight Logistics, Freight Handling: ...more
