Buy or Sell Your Makino A51
AI-ranked results for makino a51 - closest matches first
JUST ADDED!
Daewoo Doosan #Puma-2600SYII, CNC lathe, 30.7" swing, 10" chuck, 3-jaw, 3.2" bar, 14.8" dia., 29.9" lgth, Fanuc I, sub spindle, C-Axis, Y-Axis, live tooling, 2021
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Daewoo Doosan
Model: PUMA-2600SYII
Year: 2021
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Doosan-Fanuc i-Plus Series CNC Control, 2,513 ...more
Citizen #Cincom-E-32, 6-Axis CNC Swiss Screw Automatic Lathe, LNS Bar Feeder, 1.26" Turning diameter, 1.26" Bar Capacity, 6000 RPM, 7.5 HP, 1995
MachineStation | Lake Elsinore, CA
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Citizen
Model: CINCOM-E-32
Year: 1995
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Cincom 6 Axis CNC Control, Long Parts Capable ...more
4.7" Haberle #H-350H, cold saw, (2) bases, clamping wheels
D & H Machinery Inc | Toledo, OH
Category: Carbide, Friction and Cold Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Haberle
Model: H-350H
Haberle Cold Saw, -Model: H 350-H Series D Semi-Automatic, -Capacity: at 90 Degree Round Tube 4.7", Round Solid: 2.4", Square Tube: 4.1", Rectangle: 6" x 3", -Capacity: at 45 Degree Round Tube 4.3", Round Solid: 2", Square Tube: 3.7", Rectangle: 4" x 3", -Maximum Sawblade Dia.: 13.7", -Production Saw with automatic ...more
JUST ADDED!
Fanuc Servo Drive A06B-6089-H104
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A06B-6089-H104 is an Alpha series SVU1-40 AC servo amplifier unit manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate designates this unit as series B. It belongs to the A06B-6089 Alpha SVU series of single-axis servo amplifiers with a built-in power supply section, designed for use with Fanuc ...more
DMG, Gildemeister #CTX-510eco, multi-axis CNC turning center, Siemens 810D Control, 26.7" swing, 2.9" bar, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: CTX-510ECO
Year: 2012
DMG Gildemeister CTX510 eco Multi-Axis CNC Turning Center (subject to buyer verification):Working areaNo. of Axes: 3Max swing over bed: 26.77”Swing over X-slide: 18.3”Max. turning diameter: 18.3”Max. turning length: 39.37”Bar capacity: 2.9”Transverse stroke (X): 11.81”Longitudinal ...more
13200 lb. GMC #HDC-4820-6T, hydraulic decoiler, 48" width, 47" outside dimensions, 18.5"-20.75" ID, 100 FPM, hydraulic front support arm
Manufacturing Solutions | Santa Ana, CA
Category: Uncoilers and Centering Coil Reels
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: HDC-4820-6T
HVAC MACHINE TOOLS48" WIDE18 1/2" - 20 3/4"47"13,200 LBS.0-100'/ MIN0-15 MPA7 1/2 HP, 220V, 3 PHASE4 HP, 220V, 3 PHASE166" X 95" X 85"10,150 LBS..
100 Ton, Hydromec #Turbo-1000, trim press, 19.6" stroke, 15 KW, rotary dial feed, 1990
National Machinery Exchange | Newark, NJ
Category: Trimming Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hydromec
Model: TURBO-1000
Year: 1990
100 TON HYDROMEC TURBO-1000 TRIM PRESS, MANUFACTURER - HYDROMEC, MODEL - TURBO-1000, YEAR - 1990, MACHINE NUMBER - 182, TONNAGE - 100 (1000 KN), STROKE - 500MM, MAIN PRESS MOTOR - 15 KW, ROTARY DIAL FEED.
Speed-d-burr #MMSM, Vibratory Barrel Tumbler, 20" x 20" barrel, variable speed, 1 HP, 110 V.
Wheeler Machinery Sales | Pomona, CA
Category: Vibratory Finishers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Speed-D-Burr
Model: MMSM
Speed-D-Burr MMSM Barrel Finishing Machine Tumbler #7722 #2, Type: Barrel Type, Barrel Size: 20" x 20", Speeds: Variable, Main Motor: 1 HP, 110V, Protective Cover, Media Trays, Timer.
JUST ADDED!
30" Coe Press Equipment #233, rotary veneer lathe, 30" swing, 44" knife length, 50 HP, hydraulic unit
Equipment Hub | Decatur, GA
Category: Woodworking Lathes
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Coe Press Equipment
Model: 233
Stock #: 191260015, Brand: COE, Model: 233, Approx. Shipping Weight: 20,000 Lbs, Swing: 30 in, Knife Length: 44 in, Main Motor HP: 50, Additional Info, Complete with Hydraulic unit, all drive motors and controls, Includes veneer knife, Stock #: 191260015Brand: COEModel: 233Approx. Shipping Weight: 20,000 Lbs, Swing: ...more
17.7" Raimann #ProfiRip-KR-450-M, Gang Rip Saw, ValuRip4 infeed system, 17.7" width cut, 50 HP, 26-262 FPM, one moving blade, 2012
Carolina Machinery Sales | Monroe, NC
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Raimann
Model: PROFIRIP-KR-450-M
Year: 2012
Raimann KR450M Gang Rip Saw with Infeed, Cutting width: 450 mm, Main Motor: 50 HP, Feed speed: 8-80 M/Min, Value Rip 4+ Infeed System.
Caterpillar 336FL THB, Crawler Excavator, 3455 hours, S/N: RKB21033, 2018
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Excavators
Seller: Wagner Equipmet - Heavy Machinery
Location: Las Cruces, NM
Mfr: Caterpillar
Model: 336FL THB
Year: 2018
* FOR 42" SD BUCKET & COUPLER *, ACCUMULATOR WITH CRN, AIR CLEANER, HIGH EFFICIENCY, AIR CONDITIONER, ALARM, TRAVEL, BATTERY, COLD WEATHER, BLOCK HEATER, BOOM PKG, REACH CGC, BOOM, REACH 6.5M (21'4") CGC, BRACKET GP, BUMPER, SIDE RUBBER, C9.3 ENGINE, CAB-ROPS,70/30,W/VANDAL-GBSS, CAMERA, REAR VIEW, MIRROR-RH ...more
3/8" x 10' Roundo #PS-255, 3-Roll Pyramid Plate Roll, Control pendant, hydraulic drop arm, 10 HP, 10"/13.39" top/side roll diameter, 460 V., 3ph, 1988
Southern Fabricating Mchy Sales | Lithia, FL
Category: Pyramid Plate Roll Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Roundo
Model: PS-255
Year: 1988
3/8" X 10’ Pyramid Style Plate Rolling Machine with Control Pendant and Hydraulic Drop Arm., Max Thickness: 3/8”, Roll Length: 122”, Main Motor: 10 HP, Top Roll Diameter: 10”, Side Roll Diameter: 13.39”, Electrical: 460 Volt / 3 Phase / 60 HZ, Machine Weight: 15,500 Lbs, Dimensions: ...more
JUST ADDED!
Daewoo Doosan #DNM-5700, high precision, heavy duty CNC vertical machining center, Doosan Fanuc i Series Control, 41.3" X, 22.4" Y, 20" Z, 12000 RPM, 30 automatic tool changer, 2018
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Daewoo Doosan
Model: DNM-5700
Year: 2018
Doosan DNM 5700 High Precision, Heavy Duty CNC Vertical Machining Center (subject to buyer verification):Table Size51.18″ x 22.44″Table Load Capacity2205 lbsX Axis Travel41.33″Y Axis Travel22.44″Z Axis Travel20.08″Rapid Traverse Rates (X&Y / Z)1417 IPM / 1181 IPMMagazine Capacity30 ...more
Eurotech #B446-SY2 RBT2 Trofeo, CNC lathe, 20" swing, 8" chuck, 2.5" bar, 37.5" centers, Fanuc 31iB, Tri-Mist 850 G2 mist collector, 12' Edge Patriot magazine barfeeder, 2020
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eurotech
Model: B446-SY2
Year: 2020
2.56” X 37.5” CNC Lathe with Fanuc 31iB Control, Tri - Mist 850 G2 Mist Collector, 12’ Edge Patriot Magazine Barfeeder, LNS Magnetic Chip Conveyor, 1000 PSI HP Dual Pump Coolant System Coolant Thru Sub-Spindle, Royal QG-65 Main Spindle Collet Chuck, Royal QG-42 Sub-Spindle Collet Chuck, 200mm Ejector ...more
Quick-Tech #T8-Twin-Y, 4-Axis CNC Lathe, 19.7" swing, 13.8" machining length, 8" chuck, A2-6, 20 HP, 4000 RPM, sub spindle, live tooling, 2021
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Quick-Tech
Model: T8-TWIN-Y
Year: 2021
QUICK-TECH T8-TWIN-Y 2021 CNC lathe. s a machining length of 13.8", 8" chuck, and dual spindle with C axis. Includes BMT45 live tool and offers speeds up to 4000 RPM. 20 HP spindle motor., Main Spindle Swing Over Bed:, 19.7, Main Spindle Swing Over Cross Slide:, 11.8, Main Spindle Chuck Type:, 8 3 Jaw Hydraulic, Main ...more
JUST ADDED!
Vecoplan #RG-70/200KT-FF, Shredder, 272 HP, 10 HP, 2008
Federal Equipment Company | Cleveland, OH
Category: Shredders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vecoplan
Model: RG-70/200KT-FF
Year: 2008
Used Vecoplan Shredder, Model RG 70/200KT FF, 52" x 82" feed opening, 20" diameter rotor, 203 kw(272 hp) main motor, hydraulic stuffer with 10 hp hydraulic pump, with feed hopper, serial# 11333010, built 2008.
Mazak #VariAxis-500-5X-II, CNC Vertical Machining Center, 5-Axis, 20" X, 20" Y, 18" Z, 19" x 15" Table, 30 HP, 25000 RPM, HSK-63A Taper, 120 automatic tool changer, 2008
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: VARIAXIS 500-5X II
Year: 2008
MAZAK VARIAXIS 500-5X II for sale. s 5-axis capability, 25,000 RPM spindle, 30 HP motor, and Mazatrol Matrix CNC Control. Includes coolant through spindle and chip conveyor. Dimensions: 110"x115"x109", weight: 26,000 lbs., # Axis: 5, Table Size: 19" x 15", Max Table Load: 661, X-Axis Travel: 20", Y-Axis Travel: 20" ...more
Helle, 5-head Block Sawmill, 200 HP, 52" sawblade, 8'-40' logs, conveyors, turners
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Helle Circle Sawmill - Unit has been dismantled and ready to load, Log capacity: 8'-40', 52" Main Sawblade, Top Saw 42", 200 HP Main Motor, 5-Head Block Carriage, 40' Log Deck, Operator cab with touch screen setworks, Two Log turners, Drop Conveyor for waste, Roller conveyor for lumber.
Humbolt Wedag Humbolt-Wedag #B-3, centrifuge, decanter, 100 HP, Carbon Steel
Machinery & Equipment Co | Brisbane, CA
Category: Decanter Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Humbolt Wedag
Model: B-3
Humbolt-Wedag decanter centrifuge, model B-3 with all wetted parts being carbon steel. Unit has 100 HP V-belt main drive, 30 HP viscotherm back drive, bowl measures 25" x 100" rated for 2700 RPM, last running municipal waste water., Basis: FOB.
12" Carr #Powerfuge-P12, Titanium Basket Centrifuge System, solid basket, Stainless Steel housing, 10 HP, 1998
Perry Videx LLC | Hainesport, NJ
Category: Centrifuges
Seller: Perry Videx LLC
Location: Hainesport, NJ
Model: POWERFUGE-P12
Year: 1998
Used 12" Diameter Carr P12 Powerfuge Titanium Basket Centrifuge System, Manufacturer: Carr, Model: P12 Powerfuge, Serial: 0191, Year: 1998, Basket dimension: 12" diameter, Basket type: Solid, Capacity: 500 liter/hr, Material of basket: Titanium, Max. internal pressure: 30 psi @ 4-40C, Driven by a 10 hp main motor ...more
JUST ADDED!
DMG Mori Seiki #CTX-Beta-1250-TC, CNC Lathe, 19.7" Swing, 40.2" Centers, 47.2" Machining length, 12" Chuck, 19.7" Cutting diameter, 4000 RPM, 2009
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Dmg
Model: CTX BETA 1250 TC
Year: 2009
Used CNC lathe, featuring a 19.7" swing, 47.2" machining length, 4,000 RPM max speed, and 12 mm chuck size. Includes automatic part unloader, chip conveyor, coolant thru spindle, chiller, and high-pressure coolant tank., Swing 19.7", Max Cutting Diameter 19.7", Distance Between Centers 40.2", Machining Length 47.2" ...more
Cauffiel, heavy duty 4-high backed up plate leveler with pinch rolls, 2008
Perfection Global | Elk Grove Village, IL
Category: Plate Levelers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Cauffiel
Year: 2008
Maximum Width: 62.5"Plate Thickness: 1/4" - 4"Roll Face Width: 84"Number of Straightening Rolls: 7 (4 Over 3)Straightening Rolls Diameter: 11.75"Backup Rolls Diameter: 11.5"Main Motor: AC, 200 HP, 1785 RPMElectrical: 480V, 600A, Top and Bottom Backup RollsOne Set of Pinch RollsCP-2 Computer Controller*Infeed and ...more
Schmalz #Vacumaster-Basic-100KG, vacuum lift, 2026
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Model: VACUMASTER-BASIC-100KG
Year: 2026
SCHMALZ VACUMASTER BASIC 100 KG Vacuum Lift : -- VacuMaster Basic vacuum lifting device for mounting on a crane hook. Suitable for the horizontal transportation of workpieces with a weight of up to 200 Lbs. -- (1) VacuMaster bow handle for ergonomic operation, length 24" (600 mm) malfunction-free manual sliding valve ...more
500 Ton, USI Clearing #S2-500-108-60, straight side double crank tie rod press, 12" stroke, 38" Shut Height, 12" adjustment, 1984
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Usi Clearing
Model: S2-500-108-60
Year: 1984
500 TON USI CLEARING S2-500-108-60 SSDC PRESS, MANUFACTURER - CLEARING, TONNAGE - 500 TON, MODEL NUMBER- S2-500-108-60, TYPE - SSDC TIE ROD PRESS, SERIAL NUMBER - 51-1575, YEAR - 1984, STROKE - 12", SHUT HEIGHT- 38, ADJUSTMENT - 12, STROKES PER MINUTE - 28, MAIN MOTOR - 75 HP, 1200 RPM, CUSHION - YES, CUSHION STROKE - ...more
Featured
SAC #CS-4, sliding table saw, 102" capacity, 12.4" blade, rip fence
Peak Closets | S Salt Lake, UT
Category: Table Saws
Seller: Peak Closets
Location: S SALT LAKE, UT
Mfr: Sac
Model: CS 4
Closing the shop and need to sell this SAC CS 4 Sliding Table Saw. It comes with a spare scoring blade and main blade., 2,600 mm (102") cutting capacity, Scoring saw, 1 HP, 120 mm (4.7") blade diameter, Main saw, 9 HP, 315 mm (12.4") blade diameter, Variable RPM: 2800, 4000, 5600, Rip fence, Cross cut fence, Outfeed ...more
1/4" x 10.3' Cincinnati #2CC10, Mechanical Shear, 36" Back Gauge, 60 SPM, 4" gap, 7.5 HP, 1978
Southern Fabricating Mchy Sales | Lithia, FL
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Cincinnati
Model: 2CC10
Year: 1978
¼” X 10’ Mechanical Power Squaring Shear with Front Operated Backguage, Dovetail Slots & Hand Slots in Table, Squaring Arm, Electric Foot Switch, Automatic Pressurized Lubrication, Light Bar and Non - Float Inclined Ram., Capacity: ¼”, Distance between Housings: 10’ 3” ...more
Waterbury-Farrel, 12-pass fine wire drawing machine
International Rolling Mills | Pawtucket, RI
Category: Wire Drawers
Seller: International Rolling Mills
Location: Pawtucket, RI
Mfr: Waterbury-Farrel
This 12-pass cone-type wire drawing machine is designed for precision multi-pass reduction of fine and intermediate wire across a range of materials and applications., Featuring a full cone progression from 11" down to 1.75", the machine enables smooth, incremental reductions through each pass, providing excellent ...more
400 Amp. General Electric, A-Series, Panelboard, (5) Main & Breakers, 3 Phase, 4-Wire, 480Y/277 V
Quantum Technology | Shippensburg, PA
Category: Panelboards (Switchboards)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: General Electric
1x Electric 400 Amp breaker SGLA36AT04001x Electric 40 Amp breaker1x Electric 50 Amp breaker1x Electric 20 Amp breaker1x Electric 60 Amp breaker60A breaker switch is broken offThe GE ASeries Panelboard is perfect for managing your electrical distribution needs. With a 480V, 277V capability and a robust 400A capacity ...more
JUST ADDED!
225 Amp. Square D #NEHB-2MW, Panelboard, 480Y/277 VAC, 3PH, 4W, NH53TS w/ Main
Quantum Technology | Shippensburg, PA
Category: Panelboards (Switchboards)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Square D
Square D 150A Main breakerSquare D 30A triple circuit breakerSquare D 20A circuit breaker —6 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described ...more
2 Ton, Cimco #2SC2, hydraulic press, 6" stroke, 9" daylight, 9" throat, 12-1/4"x8"bed, 1 HP
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Cimco
Model: 2SC2
MODEL #: 2SC2, SERIAL #: 77764, 6" STROKE, 9" DAYLIGHT, 9" THROAT, 12 1/4" x 8" BED, ON STAND, 1 1/2" MAIN CYLINDER, 1 HP 230/460/ 60/3, 30" LR x 36" FB x 72" TALL, 1500 LBS ESTIMATED WEIGHT.
5-1/2" x 63" Calpe #TH5-1600, CNC Woodworking Lathe, 50 FPM, 6000 RPM, 575 V., 2001
Ex-Factory | Charlotte, NC
Category: Woodworking Lathes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Calpe
Model: TH5-1600
Year: 2001
CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: : -- Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives. -- 63" (1,600 mm) Max. distance between centers; 5-1/2" (140 mm) max. swing diameter between spindles. -- CNC Controlled with 2.95" (75 mm) travel for depth of cut. ...more
3000 KVA Caterpillar #C175-16, generator set, sound enclosure, 400 Volts, 50 Hz, 82 Hours
NineX Power Systems | Spring, TX
Category: 50 Hz Diesel Generators
Seller: NineX Power Systems
Location: Esbjerg, Europe
Mfr: Caterpillar
Model: C175-16
Year: 2016
Very Low Hour CAT C175-16 3000kVA Generator Set; Sound Enclosure; Immaculate Condition – 82 Original Hours; 3000kVA Standby Rated; 50Hz; 400V; EMCP 4.2 Control Panel; 5000A Breaker; Six Units In Stock – Immediately Available, GENERATOR SET: Manufacturer : Caterpillar Manufacturer : Caterpillar Package ...more
Summit #PR-9S, 2-ram horizontal baler, 60 HP, 9" cylinder, 8" eject cylinder, 60" x 44" x 46" feed open, 1998
Ex-Factory | Charlotte, NC
Category: Horizontal Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Summit
Model: PR-9S
Year: 1998
SUMMIT PR-9S 2-Ram Horizontal Baler -- Motor: 60 HP. -- Main Cylinder: 9". -- Eject Cylinder: 8". -- Feed Opening: 60" x 44" x 46". -- Cranston Wire Tie. -- Infeed Conveyor. -- Loaded onto your Truck.
60" x .105" Red Bud, Cut-To-Length line, 23000 lb., LR, coil car, uncoiler, peeler table, 1985
D & H Machinery Inc | Toledo, OH
Category: Cut-to-length Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Red Bud
Year: 1985
Capacity: 0.020" - 0.105" Mild Steel, Line Direction: Right to Left, Consisting of:, -Peeler:, Attaches to Straightener, -Straightener / Edge Trimmer Unit:, 60" x 0.020" - 0.105" Capacity, Model SM560, S/N: SSF85-M0056, Entry Driven Pinch Rolls, 7 Work Rolls, 3 over 4, Exit Driven Pinch Rolls, Hydraulic Drive, Double ...more
SMS Thyssen Wagner #RAW125/100-3000/600, Ring Rolling Machine, 3000mm diameter Rolled rings, 1995
National Machinery Exchange | Newark, NJ
Category: Forging Ring Rollers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Model: RAW125/100-3000/600
Year: 1995
Exit and Entry Manipulators, Diameter of Rolled Rings:, Min/Max.280/3000 mm, Height of rolled rings:, Min/Max.30-600 mm, Radius rolling force Max.1, 25MN (125 Tons), Axial rolling force Max. 1.00 MN (100 Tons), Rolling speed.0.4 - 1.6 m/s, Diameter main cylinder. 610 mm, Length of the roll axis (cone). 60, Angle of ...more
JUST ADDED!
Daewoo Doosan #SMX3100ST, CNC Lathe, 60.6" Machining length, 18" Chuck, 2.9" Bar, 26" Turning diameter, 40 HP, 3000 RPM, 80-Station ATC, 2019
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Daewoo Doosan
Model: SMX3100ST
Year: 2019
Used Multi-axis CNC lathe. s 12,000 RPM B-axis mill head, 12-station live tool turret, 80-station ATC, and Fanuc 31i control. Includes coolant chiller, mist collector, chip conveyor, and probing system. Comprehensive collet set included., Max Machining Diameter Upper / Lower: 26" Max Turning/Machining Diameter (Main ...more
Mazak #HCN-6800, CNC horizontal machining center, 60 automatic tool changer, 41.3" X, 35.4" Y, 38.5" Z, 8000 RPM, #50, Mazatrol Matrix Nexus, 2008
Machinery Marketing International | Chicago, IL
Category: Horizontal CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Mazak
Model: HCN-6800
Year: 2008
1000 PSI coolant Thru| Extended 80 tool capacity| Renishaw Probing, Pallet Dimension: 24.8 x 24.8, Pallet Load Capacity: 3306 lbs, Table Index: 1 Degree / 360 Positions, Max Workpiece Diameter: 41.34, Max Workpiece Height: 51.18, X-Axis Travel: 41.34, Y-Axis Travel: 35.43, Z-Axis Travel: 38.58, Distance from the ...more
Mazak #VC-500A/5X, CNC vertical machining center, 60 automatic tool changer, 21.8" X, 19.8" Y, 20" Z, 20000 RPM, #40, 40 HP, Smooth X, 2019
Used CNC LLC | Huntley, IL
Category: Vertical CNC Machining Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Mazak
Model: VC-500A/5X
Year: 2019
MAZAK VC 500A/5X CNC 5 Axis Machining Center from 2019, used but in excellent condition. MAZATROL SMOOTH X, 40 HP spindle, 20,000 RPM, 60 ATC, and synchronized tapping. s high-speed performance and advanced software capabilities with probing., 2019 MAZAK VC 500A/5X, Number Of Tables / Pallets. 1, Table Size - L. ...more
DMG, Mori #Sprint-32-8, CNC Swiss type lathe, Fanuc 32i-B Plus Control, 1.25" bar, 2023
Premier Equipment Inc | Altamonte Springs, FL
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: SPRINT-32/8
Year: 2023
DMG Mori Sprint 32/8 CNC Swiss-Type Lathe (2023) (subject to buyer verification):Max. workpiece diameter: 1.25 in. (32mm)Max. workpiece length: 9.4 in.Max. bar diameter: 1.25 in. (32mm)Max. X-axis travel: 2.8 in.Max. Y-axis travel: 15.9 in.Max. Z-axis travel: 3.9 in.Main spindle: 8,500 rpm, 29.8 ft lb, 7.4 hpCounter ...more
600 Ton, Williams #H-600-60-36, hydraulic press, 16" stroke, 20" Shut Height, 36" daylight, 72" x 60" bed
Rygate, LLC | Clarkston, MI
Category: Hydraulic Presses
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Williams
Model: H-600-60-36
Year: 1962
PRESSING - 600, STRIPPING - 60, NET LIFT @ FAST OPEN - 5, ECCENTRIC LOAD CAPACITY (INCH TONS)* - 4800, DIMENSIONS (INCHES), DAYLIGHT (OVER BED BOLSTER) - 36, STROKE OF MAIN SLIDE - 16, SHUT HEIGHT - 20, DIE SPACE (RIGHT TO LEFT x FRONT TO BACK) - 72x60, BETWEEN HOUSING (RIGHT TO LEFT x FRONT TO BACK) - 74x62, BED ...more
3/8" x 12' Cincinnati #2512G, Power Squaring Shear, 20 HP, 36" Back Gauge, 2019
N S Machine Corp. | Granger, IA
Category: Power Squaring Shears (Inch)
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Cincinnati
Model: 2512G
Year: 2019
, Manufacturer: Cincinnati, Model Number: 2512G, Serial Number: 56811, Year: 2019, Stock Number: 14042, s:, Operator control stand, Foot pedal control, 36" power back gauge, 13' squaring arm, Ball transfers in table, Finger guard, Cutting length: 12', Maximum thickness capacity: 3/8", Length of blades: 148" ...more
Paoloni #P260, Sliding Table Saw, 6 HP, 230 V., 3ph, 12" blade, 51" rip fence, 1998
Wheeler Machinery Sales | Pomona, CA
Category: Table Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Paoloni
Model: P260
Year: 1998
1998 PAOLONI P260 Sliding Table Saw #7959 #1, -102 aluminum sliding table, -6HP main motor 230v 3phase electrics, -Tilting arbor with tilt scale in handwheel, -Cross cut fence with 2 flip stops, -12 blade capacity, -Scoring unit with lever adjustments, -Manual rip fence with 51 capacity with extension table, -Electric ...more
JUST ADDED!
Mazak #M5x3000U, CNC lathe, Mazatrol T32-2 Control, 24" swing, 126" centers, 4-jaw 18" chuck, 4" bar, 1990
Adams Machinery | Libertyville, IL
Category: CNC Lathes and Turning Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Mazak
Model: M5X3000U
Year: 1990
Type of CNC Control Mazak Mazatrol T32-2 Chuck Size 18 inches Swing 24 inches Turning Diameter 13 inches Center Distance 126 inches Bar Capacity 4 inches Spindle Bore 4.125 inches X Axis Travel 21.26 inches Z Axis Travel 120 inches Rapid Traverse (X/Z) 394 ipm Spindle Speed (RPM) 2000 Main Motor 30 Turret Capacity 8+6 ...more
390 Ton, MAQ #WC67K-350X4000, hydraulic press brake, 13' overall, DA53T Touch Screen CNC controller
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Maq
Model: WC67K-350X4000
390 Tons X 13’ Hydraulic Press Brake with DA53T Touch Screen CNC Controller, Linear Guideway + Ball Screw for Backgauge, Rexroth Hydraulic Valve System 7, DSP Laser Safety, Quick Clamp for Punch Tools, LED Work Lamp, Rear Door, Front Support Fixed Type, Side Fence with Limit Switch, Foot pedal and Standard Punch ...more
16" x 32" Okamoto grinder, 5 HP, incremental downfeed, new coolant system, being rebuilt, 1996
Tom Hale Equipment Co. Inc | Crossville, TN
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Okamoto
Year: 1996
16 X 32 Okamoto Grinder, New 1996 Being Rebuilt, 5 HP Main Spindle Motor, Incremental Down Feed, New Coolant System, $49,500.00, Tom Hale Equipment Company, Inc., Best source of Reciprocating Surface Grinders, Since 1981, Crossville, Tennessee Tom Hale - President, Phone: 931-250-6181 Email: tomhaleequipment@gmail.com.
JUST ADDED!
40000 lb. Rowe #40060-DSV, uncoiler, 60" O.D., 20"-23" ID, expansion, 66" 4-leaf face mandrel, holddown roll
D & H Machinery Inc | Toledo, OH
Category: Uncoilers and Centering Coil Reels
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rowe
Model: 40060-DSV
40,000# x 60" Rowe Uncoiler, -Capacity: 40,000# x 60", -Model: 40060-DSV, -Coil I.D. Range: 20" - 23", -Coil O.D.: 60", -Powered Expansion, -4 Leaf Mandrel: 66" Face, -Variable Speed Drive, -Holddown Roll, -Main Drive Motor: 15 HP Baldor AC Motor, 1765 RPM, 230/460 V, -WER Industrial DC Clutch/Brake, -Air Operated ...more
8" wide x 115" long, Shuttleworth, Corner Infeed Slip-Torque Conveyor, 1/2 HP, 42/28 RPM, 2001
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Shuttleworth
Year: 2001
2001 Shuttleworth Corner Infeed Slip-Torque Conveyor. Job # 101682. Stainless steel. Main feed conveyor dimensions: 11 in. W x 115 in. L. Main conveyor final speed: approx. 42 rpm. (4) Product diverters driven by 1/2 hp GTR Gearmotor at approx. 28 rpm. Diverters feed products into a 32 in. L x 35 in. W conveyor moving ...more
80 Ton, Williams & White, Hydraulic Bulldozer, 24" Ram Stroke, 6" Ram diameter, 32"-61.75" Daylight Openings, 23 Ton Stripping capacity, 50 HP
Yoder Brothers Machinery | Toledo, OH
Category: Forging Bulldozers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Williams
Serial Number. O-3706, Capacity. 80 tons, Main Ram Stroke. 24", Main Ram Diameter. 6", Daylight Opening. 32", 37-3/4", 44", 56", 61-3/4", Cross Head Surface Area. 57" W x 12" H, Rapid Speed. 410 IPM, Pressing Speed. 177 IPM, Return Speed. 600 IPM, Distance Between Ways. 10-1/2", Stripping Capacity. 23 Tons, Main ...more
Blanchard #22HD-42, geared head rotary surface grinder, 42" chuck, certified, 1972, #17120
F P Miller Company | Jackson, MI
Seller: F P Miller Company
Location: Jackson, MI
Mfr: Blanchard
Model: 22HD-42
Year: 1972
Chuck Dia.: 42 inches Spindle (Horz/Vert): vertical Power: No Attached horsepower Swing: No Attached inches Under Wheel: No Attached inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: 22 inches CNC Control: No Attached Type of ...more
Timesavers #2300, 3-Head Wide Belt Sander
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Timesavers
Model: 2300
Year: 2008
Timesavers 2300 3-Head Wide Belt Sander, Seller′s :, Three Head Wide Belt Sander, - 43″ Wide, - Model #: [2331-24-001](tel:2331-24-001), - Year of Manufacture: 2008, - Abrasive Belt Size: 43″ x 75″, - Main Motors: 25,20,15HP, - Max Width Stock: 42″, - Max Part Length: 15″, - Max ...more
221 CFM, 125 PSI, Sullair #LS12, Rotary Screw Air Compressor, 50 Hp, accumulator
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Sullair
Model: LS12
SULLAIR LS12-50H/ SUL ROTARY SCREW AIR COMPRESSOR Stock # 7711 #1, Air Flow: 221 CFM, Operating Pressure: 125 PSI, Main Motor: 50 HP, 250 Gallon Air Accumulator.
Premier #HP20, Media Mill, 30 HP main, 1.5 HP pump, 460 V
Machinery & Equipment Co | Brisbane, CA
Category: Media Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Premier
Model: HP20
Premier Media Mill, Model HP20 - Driven by a 30 HP main motor and includes a 1.5 HP pump. Rated for 460 volts. Serial number HP20 58584 89 0013. Previously used in the cosmetics industry., HP: 30, Materials of Construction: Stainless Steel, Basis: FOB.
20" Rockwell #20", Vertical Band Saw, 12" clearance,, 1 HP, 20" x 24" table
Wheeler Machinery Sales | Pomona, CA
Category: Vertical Band Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Rockwell
Model: 20
ROCKWELL 20" Vertical Band Saw #8035 #1, Throat Depth: 20", Vertical Clearance: 12", Table Size: 20" x 24", Main Motor: 1 HP.
Pendu, Gang Rip Saw
Carolina Machinery Sales | Monroe, NC
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Pendu
This machine was reported to be in running condition when removed from service. Looks like a Pendu. Cannot find a plate on the machine to confirm., this is a single arbor gang and it does not have a sizer., 75 HP Main Motor 5 HP Drive motor.
1200 Amps, Siemens #WMM41125, Power Mod Modular Metering System, 125 Amps Branch, 240 V
OK Sales Inc | Burlington, NC
Category: Electric Meter Sockets
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Siemens
Model: SIEMENS
Siemens WMM41125 Power Mod Modular Metering System Meter Stack 125 A 240 VAC, Brand: Siemens MPN: WMM41125Model: Power Mod Type: Modular Metering System / Meter StackMain Bus Rating: 1200A MaxBranch Rating: 125 Amp Max240 VAC4 Meter PositionsRing Type Cover.
JUST ADDED!
Siemens #SINAMICS, Multi-Drive Cabinet - 600A Main - (10) 37 kW VFDs, 2020
Ben Jones Machinery | Waverly Hall, GA
Category: Miscellaneous Switchgear Parts
Seller: Ben Jones Machinery
Location: Waverly Hall, GA
Mfr: Siemens
Model: SINAMICS
Year: 2020
Siemens SINAMICS Multi-Drive Cabinet – 600A Main – (10) 37 kW VFDs – 2020, Late-model (2020) Siemens SINAMICS multi-drive control cabinet featuring ten (10) 37 kW variable frequency drives in a professionally engineered industrial enclosure., This is a complete, high-capacity drive lineup designed to ...more
JUST ADDED!
400 Amp, Siemens #SB3-REV.A, Switchboard, w/ 17 HEB Breakers & Main, 480 Volts, 2010
Quantum Technology | Shippensburg, PA
Category: 60 Hz Three Phase Transformers
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Siemens
Year: 2010
x5 40A breakers, x4 60A breakers, Please note that this is section 1\/4 the data plate is from the section 2\/4, The Data plate was missing., x1 70A breaker, x1 100A breakers, x1 125A breaker, x1 400A Main breaker, 30-Day Warranty & Functional Guarantee Shop with confidence! We guarantee everything we sell to be ...more
Hosokawa Bepex Rietz, Stainless Steel Thermascrew indirect dryer thermal screw blancher, #13573
JM Industrial LLC | Millwood, WV
Category: Dryers and Coolers
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Hosokawa
Hosokawa Bepex Rietz Stainless Thermascrew Dryer Thermal Screw Blancher, Unused Hosokawa Bepex Rietz processor / blancher / cooker, Model TL-60-K9224, For direct steam injection / boiling cooking corn, rice, potato, sweet potato, etc., Type 304 stainless steel construction (product contact parts) with incline screw ...more
Mazak #Powermaster, Fanuc CNC, hydraulic 30" chuck, 42" swing, 60 HP, 1200 RPM, 8 pos turret, remfr. 2025
Daniluk Corp | Oklahoma City, OK
Category: CNC Chucker Lathe
Seller: Daniluk Corp
Location: Oklahoma City, OK
Mfr: Mazak
Model: POWERMASTER
Year: 2025
MAZAK POWERMASTER, Manufacturer: Mazak, Model Number: Powermaster 1600 CNC, Year Manufactured: 1981, Chuck: 30" 3-Jaw Hydraulic, Maximum Swing over Bed: 42", Maximum Swing over Carriage: 36", Maximum Turning Diameter: 42", Maximum Turning Length: 40", X-axis Travel: 24.5", Z-axis Travel: 45", Main Motor: 60 HP ...more
Mazak #PowerMaster-2500-12.5, Fanuc 0iTF, 28" chuck, 12-1/2" hole, remfg 2025, 1 year warranty
Daniluk Corp | Oklahoma City, OK
Category: CNC Lathes and Turning Centers
Seller: Daniluk Corp
Location: Oklahoma City, OK
Mfr: Mazak
Model: POWERMASTER-2500-12.5
Year: 2025
MACHINE, MANUFACTURER: MAZAK, MODEL NUMBER: POWER MASTER PMC 2500-12.5 CNC, YEAR RE-MANUFACTURED: 2019, CHUCK: 28" - MANUAL 3 JAW WITH 12.5" HOLE, MAX SWING OVER BED: 36", MAX SWING OVER CARRIAGE: 24", HOLE THRU SPINDLE: 12.5", MAX TURNING LENGTH: 98", X-AXIS TRAVEL: 24.5", Z-AXIS TRAVEL: 98", MAIN MOTOR: 75 HP ...more
Mazak #Quick-Turn-Nexus-200-II, CNC Turning Center, 24" Swing, 8" 3-Jaw Chuck, 2.5" Bar, 13.78" diameter x 20.16" L Machining Size, 35 HP, 12-Position Turret, 2007
Prestige Equipment Corp | Melville, NY
Category: CNC Lathes and Turning Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Mazak
Model: QUICK-TURN-NEXUS-200-II
Year: 2007
Maximum Swing: 24.02", Maximum Turning Diameter: 13.78", Maximum Machining Diameter: 13.78", Maximum Machining Length: 20.16", Maximum Bar Work Diameter: 2.56", Spindle Nose: A2-6, Spindle Bore: 2.99", Spindle Speed: 5000 RPM, Main Spindle Motor: 35 HP, Turret Tools: 12, X-Axis Travel: 7.5", Z-Axis Travel: 21.125" ...more
Mazak #Slant-Turn-50N, CNC lathe, 2-Axis, Mazatrol 640T Control, 80" centers, 18" chuck, 4" spindle bore, 2006
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: SLANT-TURN-50N
Year: 2006
MAZAK Slant Turn 50N CNC Lathe (2006), # Axis: 2, Chuck Size: 18″, Tailstock: Yes, Turning Diameter: 28″, Center Distance: 80″, Spindle Bore: 4″, X Axis Travel: 22.6″, Z Axis Travel: 80″, Rapid Traverse (X/Z): 473/552 IPM, Spindle Speed (RPM): 750 RPM, Main Motor: 50 HP, Mazatrol ...more
60" x .075" B & K #1.5-1766192, precision leveler, 17 rolls 8 over 9, 1.50" roll diameter, entry & exit pinch rolls, R to L
G-2000 | Toledo, OH
Category: Precision Roller Levelers
Seller: G-2000
Location: Toledo, OH
Mfr: B & K
Model: 1.5-1766192
-Model: 1.5 - 1766192 -Capacity: 60" x 0.015" to 0.075" -Number of Work Rolls: 17, 8 over 9 -Diameter of Work Rolls: 1.50" -Width of Rolls: 66" -Backup Rolls: 5 Flights Top and Bottom 3 Middle Flights - Motorized Adjustment 5 Bottom Flights - Fixed -Entry and Exit Driven Pinch Rolls -Pinch Roll Diameter: 6" -Main ...more
Star #SB-20R-G, CNC swiss automatic lathe, .79" dia., Fanuc Oi-TF Plus, Iemca steady 320 bar feeder, 2025
MachineStation | Lake Elsinore, CA
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Star
Model: SB-20R-G
Year: 2025
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Make: Star, Model: SB-20R Type G, Year: 2025 ...more
Featured
60/80/100 MVA (112 MVA Max) ABB 3-Phase Autotransformer | 230 kV to 115 kV / 69 kV with LTC
Crimson Ventures & Consulting Llc | Plainview, TX
Category: 60 Hz Three Phase Transformers
Seller: Crimson Ventures & Consulting Llc
Location: lubbock, TX
Mfr: Abb
Year: 2003
100/112 MVA ABB 230 kV to 115/69 kV 3-Phase Autotransformer with LTC, Manufacturer: ABB Year of Manufacture: 2003 Serial Number: 60258 Type: Autotransformer (Type TT 54) Condition: Used / Surplus, Core Base kVA: 60,000 / 80,000 / 100,000 kVA (55°C Rise), Maximum kVA: 67,200 / 89,600 / 112,000 kVA (65°C Rise) ...more
JUST ADDED!
360 KW Kohler #400REOZVC, Diesel Generator, Volvo #TAD12, 3ph, 120/208 Volts, weatherproof enclosure, sound attenuated enclosure, 210 hours, 2007
Quantum Technology | Shippensburg, PA
Category: Diesel Generators
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Kohler
Model: 400REOZVC
Year: 2007
2007 360kW KOHLER Diesel Generator, 360kw 3 phase; 311-wdg, STBY 250:kw 1 phase Hours:210 Enclosure: Weather-tight-Super Super Quiet!!! Current Voltage: 120\/208vac 3phase Main Breaker: 400 & 2000 amp 600HP TAD12 VOLVO Diesel Engine Govenor: ECM Base Fuel Tank: 898-Gallon Fuel: Diesel Blockheater: Yes Battery ...more
Square D, ezm135-125 ez meter pak stack 5 soc
OK Sales Inc | Burlington, NC
Category: AC Variable Frequency Drives
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Square D
Model: EZM135-125 EZ METER PAK STACK 5 SOC
WE CAN SHIP THIS ITEM!, Square D EZM135-125 EZ Meter Pak Stack 5 Socket 5 Jaw 800A Main 125A CB CAN SHIP, Brand: Square D Model: EZM135-125 Type: EZ Meter Pak Stack 5 Socket 5 Jaw 800A Main Bus Rating 125A Circuit Breaker Rating208Y/120V3 Phase4 WireType 3R Enclosure Outdoor Dimensions: 57" x 12" x 7".
1100 Ton, Fukui #TTD1100T2, straight side transfer press, 11.8" stroke, air clutch, 1990' s
Westbrook Engineering Co | Warren, MI
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Fukui
Model: TTD1100T2
Year: 1990
FUKUI TTD1100T2 straight side press from 1990, offering 1,100 tons of power. s include air brake, clutch, counterbalance, and more. Bed size 157.48"x43.3", stroke length 11.81", and motor 200 HP., Brand: Fukui, Model: TTD1100T2, Tonnage: 1,100 tons, Stroke length: 11.81" (300mm), Die height: 27.55" (700mm), Slide ...more
Mori Seiki #MT-4000C/3000, MSX-502III Control, 4-jaw 24" chuck, 37" cutting diameter, 120" cutting length, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mori Seiki
Model: MT-4000C/3000
Year: 2007
MORI SEIKI MT4000C/3000:MAX CUTTING DIAMETER 37″MAX CUTTING LENGTH 120″X-AXIS TRAVEL 39.6″Y-AXIS YesY-AXIS TRAVEL 11.81 (+/- 5.9″)Z-AXIS TRAVEL 124″CHUCK SIZE 24″SPINDLE BORE 10.8″SPINDLE NOSE A1-20SPINDLE MOTOR 50 hpSPINDLE SPEED 1,000 RPMRAPID TRAVERSE RATE – X-AXIS ...more
6600 lb. GMC #HDC-4820-3T, decoiler, 48" width, 39" outside dimensions, 18.5"-20.75" ID, 100 FPM, hydraulic front support arm
Manufacturing Solutions | Santa Ana, CA
Category: Uncoilers and Centering Coil Reels
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: HDC-4820-3T
HVAC MACHINE TOOLS48" WIDE18 1/2" - 20 3/4"39"6600 LBS0-100'/ MIN0-15 MPA4HP, 220V (only), 3 PHASE4HP, 220V, 3 PHASE10 GALLONS122" X 73" X 78"5,220 LBS.
4-1/2" W x 115" L Stainless Steel, table top belt accumulation conveyor, vari-speed
Frain Industries | Carol Stream, IL
Category: Accumulation Tables
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel, table top belt accumulation conveyor. 4½" wide x 115" long Delrin product feed conveyor and (2) 30" wide x 87" long bi-directional accumulating belts which feed into the product conveyor. Mounted on a stainless steel base frame with height adjustable legs and casters with an ...more
Maguire #WSB-140, Weigh Scale Gravimetric Blender, 450 lbs/hr, Gaylord style stand and controller, WSB-140
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Maguire
used- maguire products model wsb-140 gravimetric batch blender. maximum throughput 450 lbs per hour (204 kg/hr). batch size 2.2 lbs (1000 grams). bin capacity main & minor 1.0 cubic feet ( 28.3 liter). maximum number of materials 4. 4 discharge valves. 4 bin compartments. mounted on frame. serial# b111359.
JUST ADDED!
400 Ton, Hydrap Pressen #HPDZB 400, Hydraulic Press, 47.2" stroke, 78.74" span
Maquinaria Chicago | Nuevo Leon, Mexico
Category: Hydraulic Presses
Seller: Maquinaria Chicago
Location: General Teran, Mexico
Mfr: Hydrap Pressen
Model: HPDZB 400
Year: 1987
Folio: MTMT1583, HYDRAP PRESSEN HPDZB 400, Hydraulic Press, Capacity: 400 tons, Stroke: 1200 mm (47.24"), Span: 2000 mm (78.74"), Table: 3000 mm x 1900 mm (118.11" x 74.83"), Year: 1987, Model: HPDZB 400, Hammer Area:, 3000 mm x 1900 mm (118.11" x 74.83"), Distance Between Columns: 3140 mm (123.62"), Mattress / In Ram ...more
JUST ADDED!
150 Amp, Westinghouse #PRL2, Panelboard 42 Circuit W/ Main, 1993
Quantum Technology | Shippensburg, PA
Category: Panelboards (Switchboards)
Seller: Quantum Technology
Location: Shippensburg, PA
Year: 1993
Item Dimensions - L X W X H - 24X6X48Item Weight-100lb39x Westinghouse 20 Amp single breakers1x Westinghouse 60 Amp single poleUpgrade your electrical system with the PRL2 150A 480V, 277V Panelboard. Designed with precision, this panelboard supports 42 circuits, ensuring versatility for various applications. - a main ...more
52" DMS #ZR22BBS52 Sendzimir Rolling Mill, 20 Hi 1 Stand
D & H Machinery Inc | Toledo, OH
Category: Sendzimir Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dms
Model: ZR22BBS52
Type: ZR22BBS52, Annual Tonnage Previously Rolled: 250,000 MT, -Materials: HCS, LCS, Stainless, -Maximum Coil Width: 52" (1320mm), -Minimum Coil Width: 23.6" (600mm), -Input Max. Gauge: 0.25" (6.3mm), -Output Min. Gauge: 0.009" (0.22mm), -Coil OD Range: 35.8" to 72" OD (910 to 1830mm), -Coil ID: 24" (610mm), -Coil ...more
Hurco #VM1OUi, CNC vertical machining center, 20 automatic tool changer, 21" X, 16" Y, 19" Z, 10000 RPM, #40, 15 HP, Hurco MinMax Mill, Trunnion table, 2013
Machinery Values Inc | Harrison, NJ
Category: Vertical CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hurco
Model: VM1OUI
Year: 2013
HURCO CNC 5-AXIS MACHINING CENTERMODEL: VM10Ui, S/N: H-VUO183, NEW: 2013 : PLATEN SIZE. 7.8"MAXIMUM WEIGHT ON TABLE.″30 LBS. SPINDLE NOSE TO TABLE. 1.4" - 20.4"MAIN SPINDLE SPEEDS. 10,000 RPMMAIN SPINDLE TAPER. 40 CT BIG PLUSMAIN SPINDLE HORSE POWER. 15 HPX - AXIS TRAVEL. 21"Y - AXIS TRAVEL. ...more
Chiron #FZ15W, 5-Axis Vertical Machining Center, 21.6" X, 15.7" Y, 16.7" Z, 10500 RPM, 50 HP, CAT 40, 20 Tools, 1.42" drilling, Fanuc 31i A5, 2012
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Chiron
Model: FZ15W
Year: 2012
Make: Chiron, Model: FZ15W, Year: 2012, Machine Location: Upon Request, X-Axis Travel: 21.65″, Y-Axis Travel: 15.75″, Z-Axis Travel: 16.73″, Max Spindle Speed: 10,500 RPM, Spindle Motor: 50 HP, Spindle Taper: CAT 40, Tool Capacity: 20 Tools (Umbrella), Table Size (Each Side): 26″ × ...more
No. 1537 Michigan Roto-Flo, spline roller, 42" stroke, 3-5/8" rack face, 36" rack length, 20HP
Gibbs Machinery Co | Warren, MI
Category: Spline Rollers
Seller: Gibbs Machinery Co
Location: Warren, MI
Mfr: Michigan
Model: 1537
MICHIGAN ROTOFLO 1537 SPLINE ROLLER, Maximum Rack Length: Up to 36", Stroke: 42", Maximum Rack Face Width: Up to 3-5/8", Main Motor: 20 HP, Length: 104", Height: 72".
51" x 60" GMC #FP-5160T, belt grinder, 5" thick max, 8" roller, 15-56 FPM, variable speed, 30 HP, 208/230 V., new
Wheeler Machinery Sales | Pomona, CA
Category: Belt Grinders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: FP-5160T
Made in Taiwan, Computerized programmable thickness control, Abrasive belt size: 51 x 60, 10 diameter heavy duty drum for perfect graining, 5-1/8 wide opening for max. workpiece thickness 5, Motorized Table Lift with LED display, Variable Speed Conveyor, Conveyor Forward & Reverse, Belt Safety Overtravel Switches ...more
Fimal #P3200-08AX, Sliding Table Saw, 13.8" blade, 1.2" bore, 4200 RPM, 7-3/8 HP, New
RT Machine | Hughesville, PA
Category: Table Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Fimal
Model: P3200-08AX
Fimal Model P3200AX Sliding Table Saw Fixed Table Dimensions/Height:40-1/2" x 25-5/8" / 34-1/4" (1030x650mm / 870mm) Lockable Carriage Carriage Dimensions/ Stroke: 126" x 15-3/4" / 137-13/16" (3200x400mm / 3500mm) Cutting Width: 51-3/16" (1300mm) Max Diameter Saw Blade: 350mm Saw Blade Bore Size: 30mm Saw Blade Speed: ...more
Marathon #Gemini-Xtreme, closed-door horizontal baler, 30" x 48" x 60" bale, 35" x 60" charge box, 6" dual cylinder, 20 HP motor
Ex-Factory | Charlotte, NC
Category: Horizontal Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marathon
Model: GEMINI-XTREME
MARATHON - Gemini : Horizontal Closed Door Baler (Full Pen) : -- Bale size: 30" x 48" x 60". -- Charge box: 35" x 60". -- Cylinder: Dual 6". -- Main motor: 20 HP.
1600 Amps Ch Magnum Ds Indoor Switchgear 65k Amps (3) 1600 Amps Substructures
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Indoor Air Switchgear - Low Voltage
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 1600A.
1600 Amps Ch Magnum Ds Indoor Switchgear 65k Amps (4) 1600 Amps Substructures
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Indoor Air Switchgear - Low Voltage
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 1600A.
600 Ton, MAQ #WE67K-600/4300, CNC Press Brake, 169" between housing, 15.74" throat, 25.9" open, 13.38" stroke, DA53T Delem Control, part warranty, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Maq
Model: WE67K-600/4300
600 Tons X 14’ Press Brake with DA53T Delem Controller, Linear Guideways + Ballscrew for Backgauge, DSP Laser Safety Front, LED Work Lamp, Fixed Supports, Fence with Limit Switch, Foot Pedal, Standard Punch & Die, Freight, Installation, Training and 1-Year Part Warranty., Tonnage: 600 Tons, Workable Length: ...more
1/4" x 10' Maq #QCY-6X3200, Hydraulic Shear, E21S Control on Swivel Arm, Safety Sensor, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Maq
Model: QCY-6X3200
¼” X 10’ Hydraulic Shear with Estun E21S Controller on Swivel Arm, Shadow Light, Material Drop Platform, Full Front Finger Guarding with Quick Access Section, 2' Squaring Arm, Dual Front Support Arms, Rear Fence / Safety Sensor for Backgauge Drop Area, and Oil Cooler., Max. Material Thickness: ...more
Mori Seiki #SL-8, CNC Turning Center, 35.4" max. turning diameter, 43.3" max. turning length, 39.9" swing over bed, 24" chuck, 10.5" big bore, Fanuc 0i-TD
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Mori Seiki
Model: SL-8
Year: 1990
*All are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*, s:, Fanuc 0i-TD CNC Control, Long Bed Machine, 6-Station Turret Box Ways Design, Geared Head spindle for powerful torque, Hydraulic Turret ...more
150 KVA Eaton #PDU-A, Power Distribution Unit, (53) Main & Breakers, 3 Phase, 480 x 208/120 V, 2011
Quantum Technology | Shippensburg, PA
Category: Power Distribution Units (PDU)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Eaton
Model: PDU-A
Year: 2011
1 400A main4 225A breakers20 20A 2 pole 9 30A 2 pole 18 20A 1 pole 1 60A 3 pole Experience reliable power distribution with the 150KVA Eaton PDU-A 480V x 208\/120 3PH 4W EE083SXX12. This powerhouse PDU is designed to handle your heavy-duty electrical needs with ease. - Efficient 3-phase power distribution- High ...more
JUST ADDED!
Daewoo Doosan #Puma-700L, CNC universal turning center, 24" chuck, 4-jaw, Fanuc 32i-A, tool setter, programmable tlatk, hydraulic Steady Rest, 2015
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Daewoo Doosan
Model: PUMA-700L
Year: 2015
DOOSAN PUMA 700L CNC Universal Turning Center by DAEWOO, model year 2015. This used 2-Axis & 3-Axis CNC lathe offers reliable performance for your machining needs. Ideal for precision engineering tasks., 2015 DAEWOO PUMA 700L, Swing Over Bed. 40.5", Machining Length. 126", Distance Between Centers. 141.7", Turning ...more
JUST ADDED!
Siemens Infeed Regenerative Feedback Module 6SN1145-1BA01-0DA1
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Siemens
The Siemens SIMODRIVE 611 6SN1145-1BA01-0DA1 is an infeed and regenerative feedback module rated at 55 kW continuous and 71 kW peak output power. Part of the SIMODRIVE 611 modular drive system, this unit provides regulated DC bus power to connected axis and spindle modules within a CNC or industrial automation ...more
Haas #DS-30Y, CNC lathe, 31.7" swing, 8" chuck, 2" bar, 18" dia., 23" lgth, A2-6, live tooling, sub spindle, rigid tap, 2021
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: DS-30Y
Year: 2021
2021 Haas DS-30Y Dual Spindle CNC Lathe, 32" Swing, 21" Over Cross. 10" Chuck Main, 8.3" Chuck Sub. 6K RPM on Live, 4K on C-Axis. 24-Station BMT65 Turret, Tons of Options, V2 Barfeeder included, optional equipment: Royal Workholding including Rota-Rack, Platinum Tooling, Haas DS-30Y CNC Dual Spindle Lathe, New: 2021 ...more
Nexturn #SA-38, 1.5" bar, Fanuc 18i-TB, 8k RPM, 7.5 HP, 9 live tools, C-Axis, 12' Iemca 547/37 Boss Magazine barfeed, parts catcher, 2004
Champion Machinery Inc | Fort Mill, SC
Category: CNC Lathes and Turning Centers
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Nexturn
Model: SA-38
Year: 2004
, Max Diameter Bar Capacity 38mm (1.5"), Max Machining Length 8.26", Sub Spindle Speed 8000 RPM, Rapid Traverse Rates 1260 IPM, C-Axis Index (Main & Sub).001 Degrees, Machine Weight 7,718 LBS, Back Spindle Bar Capacity 1.5", Back Spindle Motor 3.5 HP, Back Working Tools 7 / 2 Live, Cross Live Tool Motor 1.5 HP ...more
48" x 108" Monarch Heavy Duty Dyna-Shift, Newall 2-Axis Digital Readout
Mullin Machinery | Farmingdale, NJ
Category: Engine Lathes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Monarch
Product, MONARCH HEAVY DUTY DYNA-SHIFT LATHE 48″ X 108″, Serial # 42218 Model: Series 90, Catalogue Size 2502, New 1957, Swing Over Bed Ways: 48″, Swing Over Cross Slide: 36″, Spindle Hole Size: 4-1/16″, Spindle Type: D1-11, Spindle Taper: 7 MT, (36) Spindle Speeds: 6 to 750 RPM, (48) ...more
150 Ton, Williams, 30.5" x40.5", upact.4-post, 36" stroke, 45" -71" DL, 12" ram, 60" work height, #286
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Williams
FRONT TO BACK DIMENSION INCLUDES TWO 8" REMOVABLE EXTENSIONS ON CROWN AND SLIDE. NOMINAL PLATEN SIZE WITHOUT EXTENSIONS IS 30 \u00bd" L to R X 24 \u00bd" F to B. DISTANCE BETWEEN POSTS: 31 \u00be" L to R X 10 \u00bd" F to B. POST DIAMETER 3 \u00bd". MAIN RAM: 12" DIAMETER, SINGLE ACTING, RATED AT 2700 PSI, 1 \u00bd" ...more
20" x 22" Bliss, 2 Hi Temper Cold Rolling Mill, 900 FPM line speed, roller bearings, R-L
National Machinery Exchange | Newark, NJ
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
MANUFACTURER - BLISS, CONFIGURATION - 2HI, TYPE - ONE WAY TEMPER, WIDTH RANGE - 4" - 20", THICKNESS RANGE - 0.008" -.250" ALUMINUM / 0.019" -.200" STEEL, ROLL DIMENSIONS- 20" DIAMETER X 22" FACE, COIL ID/OD - 20" ID ENTRY/EXIT, 60" OD ENTRY/80" OD EXIT, LINE SPEED - 900 FPM, MAIN MILL MOTOR - 450 HP DC, 600/1200 RPM ...more
5 Ton, Ace #A75, trolley hoist, 8' 6" spread, 35' lift, 7/16" XIP hoist cable, 2 PD reeving, #17137
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ace
Model: A75
SERIAL. 1679, MODEL. A75, CLASS OF SERVICE. "E", CAPACITY. 5 TONS, SPREAD. 8 6", LIFT. 35, HOIST SPEED. 55 FPM, DIAMETER HOIST CABLE. 7/16" XIP, REEVING. 2 P.D., TROLLEY SPEED. 120 FPM, TROLLEY WHEEL DIAMETER. (4) 8", RAIL SIZE. ASCE #80, WHEEL LOAD CAPACITY. 4800# MAXIMUM, MAIN MOTOR. 20 HORSEPOWER.
33 Ton, Bruderer #BSTA-300-85, High-Speed Press, 6.73"-9.41" shut height, 33.07" L-R tool loading area, 2.01" ram adjustment, 100-1400 SPM
Wenco Machinery Corp | Ringwood, NJ
Category: High Speed and Automatic Presses
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Bruderer
Model: BSTA 300-85
PRESS FORCE 300 KN, TOOL LOADING AREA 850 mm L-R, ADJUSTABEL STROKE 13, 16, 19, 25, 32, 38, 44, 47, RAM ADJUSTMENT RANGE 51 mm, SHUT HEIGHT (According to stroke) 171mm to 239 mm, BOLSTER AREA 840 mm L-R X 480 mm F-B, RAM AREA 630 mm L-R x 360 mm -F-B, SPEED 100 -1400 SPM, FEED BBV2025 (left side of press).
Pullmax Universal Shearing & Forming Machine, quick beveller
TNT Industrial | Orange, CA
Category: Beveling Machines
Seller: TNT Industrial
Location: Orange, CA
Mfr: Pullmax
X8 PULLMAX UNIVERSAL "QUICK" BEVELLER. Model X8, Series "QUICK". Main Motor, Horsepower 2 HP. Stainless and Acid Resisting Steel. Height to Cutting Level 31.5". Cutting Speed for Stainless Steel 6 FPM..
Alfa-Laval/Sharples #PM-70000, Super-D-Canter Centrifuge, Stainless Steel, 5" single lead conveyor, 200 HP
Aaron Equipment Co | Schaumburg, IL
Category: Decanter Centrifuges
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Alfa-Laval
Model: PM-70000
used- alfa laval / sharples pm-70000 super-d-canter solid bowl decanter centrifuge, (same size as a p-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 hp main drive motor, lubrication pump system.
Insta-Pro #2000, continuous expeller press, oil, vertical screw feed, belt driven drive
Machinery & Equipment Co | Brisbane, CA
Category: Food Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Insta-Pro #2000
Insta-Pro Model 2000 continuous oil press designed for production of vegetable oils from oilseed materials including soybean, canola, and sunflower. Unit utilizes a screw press design to mechanically extract oil while producing a consistent press cake byproduct. a 30 HP main drive and 3 HP feed drive, and featuring a ...more
6" x 14" Kent #KGS-200, surface grinder, 8" wheel diameter, 1.5 HP, electromagnetic chuck w/ Control
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Kent
Model: KGS-200
KENT KGS-200 SURFACE GRINDER 6" x 14" #6110 #1, Chuck Size.6" x 12" ( grinder can accommodate 6" x 14" chuck ), Wheel Diameter.8", Main Motor.1-1/2 HP, Electrics.220/440V, 3ph, Walker Fine Line Electromagnetic Chuck with Control, Vac-U-Guard Wheel Guard, Work Lamp.
