Buy or Sell Your Jointer Planers
AI-ranked results for jointer planer - closest matches first
36" x 96" x 20" Surface Combustion Plate/Table
Yoder Machinery Sales | Holland, OH
Category: Surface Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Surface Combustion
LENGTH OF PLATE. 98", WIDTH OF PLATE. 38", PLATE HEIGHT. 20", T SLOTS ON SIDE. 2, T SLOT CENTERS. 8, DRILL & TAPPED HOLES. 80, DRILL & TAPPED HOLES. 80, HOLE CENTERS ACROSS. 4", HOLE CENTER LENGTH DIRECTION. 8", HOLE DIAMETERS. 3/4, MACHINED TOP. YES, LEVERLER ON SIDES. YES.
.315" OMCG #630, automatic wire bending machine, 1" strip width, 0.08" strip thickness
FH Machinery Inc | Ivyland, PA
Category: Wire Benders
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Omcg
Model: 630
Mechanical Feedingfrom 0 up to 24.8" (630mm) Wire Diameter Range0.315" (8mm) Strip Width1" (25mm) Maximum Strip Thickness0.08" (2mm) Approx. Weight4500 lbs Approx. Floor Size144" x 47" x 79"H, 2 Plane Straightener, Powered Payoff.
Osgood #3600-E, 3 lane, inline, Stainless Steel, cup filler, heat sealer and over lidder, 30-120 cups per minute, Allen Bradley CPU controller
Frain Industries | Carol Stream, IL
Category: Filling Equipment (Fillers)
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Osgood
Model: 3600-E
Osgood, Model 3600-E, 3 lane, in line, stainless steel, cup filler, heat sealer and over lid applicator rated from 30 to 120 cups per minute – depending on materials, application and machine configuration. Currently set for (3) up pattern with 4-1/4" OD cup pockets set on 5½” centers. (3) lane ...more
Clamshell die cutter, Thomas National Press Co., 30" x40" platten, 480 V., 3 phase
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Thomas
Model: CLAMSHELL DIE CUTTER
109971, THOMAS-NATIONAL PRESS CO., CLAMSHELL DIE CUTTER, 30" X 40" PLATTEN, 3 PHASE 480V, CURRENTLY UNDER POWER, Manufacturer THOMAS-NATIONAL PRESS CO Model CLAMSHELL DIE CUTTER Condition Used Stock Number 109971.
Cast Aluminum Multistage Centrifugal Blower, 6-Stage, 4" diameter Inlet/outlet, (2) aluminum end plate & (4) Carbon Steel inner plate, 20 HP, 3535 RPM, 220 V
Machinery & Equipment Co | Brisbane, CA
Category: Turbo-centrifugal Blowers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Cast Aluminum Multistage Centrifugal Blower, 4" Diameter, 20 HP - s a 4" diameter inlet/outlet. Unit has six stages and operates at 3,535 RPM. End plates are aluminum, and inner plates are carbon steel. Driven by a 20 HP motor, 220 volts., HP: 20, Basis: FOB.
1119 sq.ft., APV #TR9GN-M11, plate heat exchanger, 96 psi, 320°F, (125) plates, 2008
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Apv
Year: 2008
ITEM NO : 102701 QTY : 1 ALLOY : A SQ.FT. : 1119 MATERIAL (S) : CS FRAME MATERIAL (T) : TITANIUM GR.1 PLATES PSI (S) : 96 PSI (T) : 96 TEMP. DEG. F (S) : 320 TEMP. DEG. F (T) : 320 TUBE HOLES : 125 PLATES V/H : V CODE : NB SHELL NOZZLES : (2)8" TUBE NOZZLES : (2)8" UNUSED; MFG. BY APV IN 2008; 1119.45 SQ. ...more
60" x 48" x 32" Angle plate, drilled & tapped holes
Yoder Machinery Sales | Holland, OH
Category: Angle Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
LENGTH OF PLATE. 60", DEPTH OF PLATE. 32", HEIGHT OF PLATE. 48", NUMBER OF SLOTS. 18, SLOT DIMENSION. 7-1/2" X 1-1/4", SLOT CENTER ACROSS. 7", SLOT CENTERS VERTICAL. 12", FACE THICKNESS. 2", DRILLED HOLES. YES, TAPPED HOLES. YES, HOLE CENTERS. 3-1/2".
10 Ton, Korsch #XL-800, tablet press, 87 station, #2705-1
Federal Equipment Company | Cleveland, OH
Category: Tablet Press Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Korsch
Model: XL-800
Used Korsch XL 800 rotary tablet press, 87 station. 100 Kn main compression with 100 kN pre-compression, "BB" tooled, dual sided, 13 mm max tablet diameter, 18 mm max depth of fill with single layer, bi-layer capable with 16 mm max depth of fill, 10 mm max second layer depth of fill, speeds up to 939,600 tablets/hour ...more
Bescutter #Space-Saver, fiber laser cutter, 60" X, 120" Y, 4.7" Z, RayTools IPG laser, 5' x 10', CypCut cnc, w/ blower, chiller, & warranty, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bescutter
Model: SPACE-SAVER
10’ X 5’ Fiber Laser Cutting System with Cypcut Control, IPG Advanced Fiber Laser, Automatic Telescoping Enclosure, Air Blower, Water Chiller System, Installation & Training and 2 Year Warranty, Standard Work Area: 10’ X 5’Laser Wattage: 1.5, 2.0, 3.0 & 4.0 KW AvailableX - Axis: ...more
61" x 143-1/2", Giddings & Lewis, T-slotted floor plate, cast iron construction, #74797
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: GIDDINGS & LEWIS
LENGTH OF PLATE. 143-1/2", WIDTH OF PLATE. 61", HEIGHT OF PLATE. 10", NUMBER OF T SLOTS. 3", T SLOT CENTERS. 16", T SLOT WIDTH AT TOP. 1". CAST IRON, T SLOT DEPTH. 1-3/4", T SLOT WIDTH AT BOTTOM. 2", CAST IRON CONSTRUCTED. YES.
Morgan Morgan Denver #Monoset-Clone-Astro, tool & cutter grinder, 12" swing, 1.25" Collet, 4" diameter grinding wheel, 1/2 HP, 4000-8000 RPM, 1989
GCH Machinery | Warren, MI
Category: Tool and Cutter Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Morgan Denver
Model: MONOSET-CLONE-ASTRO
Year: 1989
MORGAN-DENVER MONOSETCLONE TOOL CUTTER GRINDER ASTRO, S/N 7085 Year: 1989, STANDARD SPCIFICATIONS, Collet work diameter, minimum…………………………………………….125, Collet work diameter ...more
880 Ton, Mori #FB-800-FDE, fine blanking press with coil line, 11" stroke, R to L, uncoiler, 1997
Perfection Global | Elk Grove Village, IL
Category: Fine Blanking Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Mori
Model: FB-800-FDE
Year: 1997
Main Pressure: 880 TonV-Ring Pressure: 440 TonCounter Pressure: 220 TonMaximum Stroke Length: 11"Maximum Approach Speed: 425 IPMOver Run Distance: 1.4"Stopping Time:.2 secMaximum Stopping Time:.22 secMaximum Feed Length: 17.7"Line Speed: 394 IPMLine Direction: Right to Left, Coil CarUncoilerCoiler ...more
59" x 117" x 11" Cast Iron T-Slotted Floor Plates, (3 available)
Prestige Equipment Corp | Melville, NY
Category: Floor Plates and Bed Plates
Seller: Prestige Equipment Corp
Location: Melville, NY
, Quantity: 3, Plate Dimensions: 59" x 117.75", Plate Thickness: 11.5", # of T-Slots: 5, T-Slot Center Distance: 11.5", Total Pad Dimensions: 117.5" x 177".
144" x 48" x 12-1/2", T-slotted floor plate, 3 T-slots, leveling holes on top, #73254
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: T-SLOTTED FLOOR PLATE
LENGTH OF PLATE. 144", WIDTH OF PLATE. 48", PLATE THICKNESS. 12-1/2", NUMBER OF T SLOTS. 3, T SLOT CENTERS. 12", T SLOT WIDTH AT TOP. 1-1/8", T SLOT WIDTH AT BOTTOM. 2", T SLOT DEPTH. 3", LEVELING HOLES IN TOP. YES, *** SEE STOCK # 73253 IDENTICAL PLATE ***.
637 sq.ft., APV, SR35, HTST, (149) plates, 2396.53 Nominal Flow capacity, 13 gallon Condensate tank, 150 psig @ 275°F, 3 HP, 208-230/460 V.
Genemco | Hearne, TX
Category: Plate and Frame Heat Exchangers
Seller: Genemco
Location: Hearne, TX
Mfr: Apv
APV Crepaco HTST. Model: SR35. S/N: 76828. Nat'l Bd: 3066. W.O: 21308-2. Number of plates: 149. Heat transfer surface area: approx. 637 sq. ft. Number of dividers: 1. MAWP: 150 psig @ 275F. MDMT: 5F @ 150 psig. Bell & Gossett Shell & Tube Heat Exchanger, S/N: 89R77624-01-1, Nat'l Bd: 9210, shell side ...more
Outotec Larox #PF15-30/35, filter press, 12 filter plates, control panel, unused
D'Angelo International | Bellingham, WA
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Outotec
Model: PF15-30/35
- Model PF15 30/35 Larox filter press, - Unused surplus from cancelled project, - Manufactured by Outotec, - Includes control panel, pressing water station, and misc process piping, - 1.8 m3 chamber volume, - 12 filter plates, - 900 x 1750 mm plates, - Cloth width: 1.05 meters, - Immediately available, - In factory ...more
170/115 Ton, Bliss #4, double action toggle press, Rockford SSC-1550 Control, air clutch & brake
National Machinery Exchange | Newark, NJ
Category: Double Action Toggle Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: 4
170/115 TON BLISS MODEL #4 DOUBLE ACTION TOGGLE PRESS, SERIAL. 1248, MODEL. 4 B, YEAR., SLIDE PLUNGER CAPACITY. 170 TON, BLANKHOLDER CAPACITY. 115 TON, SLIDE PLUNGER STROKE. 14.5", BLANKHOLDER STROKE. 6.5", SLIDE PLUNGER SHUT HEIGHT. 20", BLANKHOLDER SHUT HEIGHT. 17", ADJUSTMENTS. 6", SLIDE PLUNGER AREA. " L-R X " ...more
100" x 240" x 7" Portage layout plate, grid lines, #74115
Yoder Machinery Sales | Holland, OH
Category: Layout Tables
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Portage
LENGTH OF PLATE. 240" (20'), WIDTH OF PLATE. 100", THICKNESS OF PLATE. 7", CAST IRON CONSTRUCTION. YES, OVERALL HEIGHT. 10", GRID LINES ON PLATE. YES, CENTER DISTANCE BETWEEN LINES. 7-7/8" SQUARE, (18) LEVELERS. 3 ROWS OF 6, (4) LEVELERS-THROUGH TOP ADJUSTMENT. YES, (14) LEVELERS-SIDE (EDGE) ADJUSTMENT. YES ...more
Nexgen #Gemini-Xtreme, Horizontal Baler, 30" H x 48" L x 60" width Bale Size, 147300 lbs. Platen Force, 3000 psi, 2012
Global Equipment International | Chalfont, PA
Category: Horizontal Balers
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Nexgen
Model: GEMINI-XTREME
Year: 2012
Used Gemini-Xtreme Horizontal Baler, Year: 2012, Manufacturer: NEXGEN (Gemini-Xtreme series, Marathon Equipment lineage), Model: Gemini-Xtreme, Type: Closed-End Horizontal Recycling Baler, Key (Gemini-Xtreme Model), Nominal Bale Size: 30” H × 48” L × 60” W, Maximum System Pressure: 3,000 ...more
Battenfield #BA-250/50-CDC, horizontal injection molding machine, 11" x10.5" tie bar spacing, 1998
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Battenfield
Model: BA-250/50-CDC
Year: 1998
Battenfield BA 250/50 CDC Injection Molding Machine from 1998. s horizontal mold capabilities with a 17"x14" platen area, and 11"x10.5" tie bar spacing. Ideal for plastic injection tasks. Used condition., Platen Area: 17"x14", Tie Bar Spacing: 11"x10.5", Platen Area: 17"x14", Tie Bar Spacing: 11"x10.5".
43 sq.ft., API, SM25-500-18, plate heat exchanger, 150 psi, (18) plates, Carbon Steel frame, 316 Stainless Steel plate, 212°F
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Api
ITEM NO : 113898 QTY : 1 ALLOY : S SQ.FT. : 43 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 212 TEMP. DEG. F (T) : 212 TUBE HOLES : 18 PLATES V/H : V TEMA TYPE : PLATE SHELL NOZZLES : 2-4" TUBE NOZZLES : 2-4" Unused API Heat Transfer Plate Heat ...more
59" Perrin Filter Press, 1500mm plate size, Offered refurbished with 30 day warranty, (2 available)
D'Angelo International | Bellingham, WA
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Perrin
- 2 Perrin brand filter presses, - Offered refurbished with 30 day warranty, - 2 units available, - 1500 mm plate size, - 100 plates per filter, - 165 cubic foot cake capacity, - Non-gasketed plates, - 30 mm cake thickness, -Automated hydraulics, - Dual center feed with 4 corner return, - Plate shifter.
100 Ton, 3.2 oz., Engel #ES330/100TL-V, horizontal injection molding machine, CC90 Control, 2002
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: ES330/100TL-V
Year: 2002
, New in 2002, 100 Ton Engel ES 330/100 TL V:, Shot size: 3.2 Oz, Platen Size: 27.95″ x 22.05″, Tie bar less, Max. Open daylight 27.56", CC90 control, Hour meter: 2,057, Machine is in good running conditions. Under power., Imperial Metric Tonnage 100 T 90.719 t Shot Size 3.2 oz 90.7 g Year 2002 2002.
1000 Ton, 165 oz., Engel #Duo-11050/1000WP, 55.1" x 45.27" tie bar spacing, 2005
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: DUO-11050/1000WP
Year: 2005
, 2005 1000 Ton Engel DUO 11050/1000 WP (Wide Platen):, Shot size: 165 Oz, Tie bar spacing: 55.1" x 45.27", Platen size: 78.7" x 72", Hour meter reads: 7,962, Machine is under power and in good running conditions., Imperial Metric Tonnage 1,000 T 907.186 t Shot Size 165 oz 4,677.7 g Year 2005 2005.
20" x 30" Hyd-Mech #M-20A, automatic horizontal pivot miter bandsaw, 1-1/2" x 20' 6" blade, 50-350 SFM, 10 HP, 9 gallon coolant tank
Greenway & Associates Ltd | Orange City, IA
Category: Horizontal Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: M-20A
, Automatic programmable mitering with go to angle from 90 to 30, Automatic multi-indexing up to 33 in a single stroke, Guide arms mounted on linear rails. Hydraulically powered idler side guide arm is adjustable to proper spacing., 10 HP VFD. True direct blade drive-no belts/pulleys, Full capacity, full stroking ...more
250 Ton, TMP, 20" x20" elec.platens, 6.5" daylight, 6" stroke, bottom platen shuttles in/out, #2343/44/45
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Tmp
16" DIAMETER MAIN RAM WITH APPROX 6" STROKE. TWO SIDE CYLINDERS FOR FAST CLOSE (USING A PREFILL VALVE) AND OPEN THAT ARE: 2.5" BORE; 1.375" DIA ROD; 6.5" STROKE. DAYLIGHT IS APPROX 6.5", 12.5" WITH HEATED PLATENS REMOVED. DISTANCE BETWEEN THE POSTS: 22" L TO R X 10" F TO B. OVERALL: 35" L TO R X 23" F TO B; HOWEVER ...more
115 sq.ft., Mueller, Accu-Therm AT161B-10 Stainless Steel, plate heat exchanger, 316 Stainless Steel, 24 plates, 75 psi
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mueller
Paul Mueller Accu-Therm Plate Heat Exchanger, Model AT161B-10, Serial No. 101176-2. Unit is 24 plates constructed of 316 stainless steel, providing an approximate heat transfer surface area of 115 sq. ft. Design pressure rated for 75 PSI and design temperature up to 210 F. Typical maximum water flow capacity of ...more
10" x 15" Jack Mill #JMC-400H, 5 HP, #4565
Wheeler Machinery Sales | Pomona, CA
Category: Plain Cylindrical Grinders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jack Mill
Model: JMC-400H
JACKMILL JMC-400H Cylindrical Grinder 10" x 15" #4565 #1, Distance Between Centers: 15.75", Max. Grinding Diameter: 10.24", Hydraulic Tank Capacity: 13.7 Gal., Coolant Tank Capacity: 19 Gal., Traverse Speed: 2.9-11 in/min., Travel Per Handwheel Rotation: 0.51", Swivel Angle Clockwise: 12/0 dg., Swivel Angle Counter ...more
Lyle, Web Fed Vacuum Forming Line, 40" x 40" max. Mold, 80 Ton Forming capacity, 200" L Oven
Perry Videx LLC | Hainesport, NJ
Category: Vacuum Formers and Thermoformers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lyle
Model: 140FH
Used Lyle 40" wide web fed vacuum forming line including the following:, 1995 Lyle model 140FH web fed thermoformer with maximum mold 40" x 40", 80 ton forming capacity. Has top and bottom oven with Quartz elements on top half, Calrod elements on bottom half. Oven is 200" in length and reported (5) index lengths ...more
41" x 94" Larox #PF-15 Series, concentrate filter press, unused, 2017
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Filter Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Larox
Model: PF-15
Year: 2017
UNUSED Metso Outotec Larox Model PF 15 Series Filter Press. This PF 30/35 M15 1 60 model, offers a filtration area of 30m, with 12 filter plates and a chamber volume of 1.8m. The filter plates measure 1050mm x 2400mm, while the cloth dimensions are 1210mm wide and 50m long. Designed for 575V, 60Hz electrical systems ...more
JUST ADDED!
Biesse #Akron-1430A, Edgebander, 0.4-12 mm strip edge thickness, 5.5" x 3.3" panel, 10-60 mm panel thickness, 3 HP feed motor, 39 FPM, 440 Volt, 2016
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: AKRON 1430
Year: 2016
BIESSE AKRON 1430A EDGEBANDER. -- : 0.4 - 3 mm Thickness coil edgebanding,.0.4 - 12 mm thickness of strips (HPL, veneer, solid wood strips). -- Panel thickness minimum 10 mm and 60 mm maximum. Minimum panel length 140 mm. (5.5"), minimum panel width 85 mm (3.3). -- Automatic strip & coil feed magazine with 3 mm ...more
5090 sq.ft., Alfa-Laval, M30-FG, 259 plates, 150 psi, 40mm plate size, 12" inlet/outlet nozzle
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2006
ITEM NO : 107711 QTY : 1 ALLOY : S SQ.FT. : 5090 MATERIAL (S) : CS FRAME MATERIAL (T) : 304SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 150 TEMP. DEG. F (T) : 150 TUBE HOLES : 259 PLATES V/H : V CODE : NB SHELL NOZZLES : (2) 12" TUBE NOZZLES : (2) 12" MFG. BY ALFA LAVAL IN 2006; MODEL #M30-FG; ...more
Bescutter #Flyspeed, Fiber Laser, 12000 watt, 8' x 20' cutting area, FS8000 Control System, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bescutter
Model: FLYSPEED
8.2’ X 20’ 12,000 Watt Fiber Laser with FS8000 Control System, Cypnest Nesting Software, Fan for Fume Extraction, Dust Collector 6 Core, Air Compressor with Dryer Combo and Tongfei 120000 Water Chiller., Cutting Area: 8.2’ X 20’, Laser Power: 12,000 Watts, Positioning Acceleration: 1.5 G, Laser ...more
1 sq.ft., Alfa-Laval, plate heat exchanger, 150 psi, (26) plates, 300°F, 2009
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2009
ITEM NO : 109005 QTY : 1 ALLOY : S SQ.FT. : 1.4 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 26 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : NB SHELL NOZZLES : (2)1.25" TUBE NOZZLES : (2)1.25" MFG BY ALFA ...more
Tykma Vereo #3D-LFSS, Fiber Laser Marking System, Class IV, 50 Watt, 2023
Revelation Machinery | Chicago, IL
Category: CNC Lasers
Seller: Revelation Machinery
Location: Chicago, IL
Model: 3D-LFSS
Year: 2023
Make: Tykma, Model: Vero 3D LFSS, Year: 2023, Machine Location: Upon Request, Laser Power: 50Watts, Laser Type: Fiber Laser, Configuration: 3D Marking Capability, Safety Class: ClassIV, — Laser Marking Head, — User Interface Controls, — Safety Interlocks And Enclosures, — All Available Manuals.
31 sq.ft., Superchanger, UX016-UJ-36, plate heat exchanger, 100 psi, 36 plates, 260°F, 1982
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Superchanger
Year: 1982
ITEM NO : 108454 QTY : 1 ALLOY : S SQ.FT. : 31.8 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 100 PSI (T) : 100 TEMP. DEG. F (S) : 260 TEMP. DEG. F (T) : 260 V/H : V CODE : YES SHELL NOZZLES : (2)1" TUBE NOZZLES : (2)2" PREVIOUSLY UTILIZED IN VITAMIN "C" PRODUCTION; PREVIOUS ...more
T.J. Snow capacitor discharge projection welder, 12 kJ, 18" throat, 8" x8" platen, 440/460/480 V., new
T J Snow Co Inc | Chattanooga, TN
Category: Press Type Welders - Projection
Seller: T J Snow Co Inc
Location: Chattanooga, TN
Mfr: T.J. Snow
Machine, Stock Number: TJM000918, Name: New T. J. Snow Capacitor Discharge Projection Welder, Manufacturer: T. J. Snow, Voltage: 440/460/480 Volts, Three Phase, Throat Depth: 18" in, Serial Number: TJM000918, Air Type: Adjustable/Retractable, Cylinder Diameter: 8 in, Max Force: 4020 lbf, Initiation: Dual Palm Button ...more
200 sq.ft., Mueller, AT10 F20, plate type heat exchanger, (128) 8" W x 30" H Stainless Steel plates, 23.74-24.57 pack length, 2" inlet, 2"/1.5" outlet, 100 psi @ 190°F
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mueller
Mueller Accutherm plate type heat exchanger, model number AT10 F20, approximately 200 square foot surface area. Includes (128) plates measuring 8" wide X 30" high. Unit rated for 100 PSI @ 190 degrees Fahrenheit. Maximum pack length of 24.57, minimum of 23.74. Includes 2" cold bottom inlet and 1-1/2" outlet, 2" top ...more
11 sq.ft., Alfa-Laval, TL3-PFG, plate heat exchanger, (17) plates, 150 psi, 300°F
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2011
ITEM NO : 108628 QTY : 1 ALLOY : S SQ.FT. : 11.1 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 17 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : U-STAMPED PREP TANK COOLER; 11.1 SQ. FT. PLATE HEAT EXCHANGER; MFG. BY ALFA ...more
36.5" X 36" Steam Platen (qty 3) (1579 available)
Icon Industries, Inc | Grand Rapids, MI
Category: Platens
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
75" INLET AND OUTLET OPPOSITE EACH OTHER ON 36" SIDES APPROX 9" IN FROM EDGE. SEVERAL.5" THRU-HOLES ALONG TOP EDGE OF 36" SIDES. QTY 3: 2 ARE 2.5" THICK; 1 IS 2.25" THICK. (ITEM #1579).
Wendt, used 130" x 104" Mega autoshredder, used approximately 3 years, and not used since, feed chute double feed, 2003
Alan Ross Machinery Corp | Zion, IL
Category: Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Wendt
Year: 2003
8000HP Motor & 7000HP Motor, Megashredder 130" x 104", New In 2003, Used Approximately 3 years, And Not Used Since, Feed Chute, Double Feed Roll, Mill with Liners and Grates, Rotor, Bearings, Pin Puller, Mill Water Injection System, Rotor Break and Turning System, Mill Spring Package, Feed Chute Connection Frame ...more
173 sq.ft., Superchanger, UX-296-HP45, finished product heat exchanger, 100 psi, 44 plates, 225°F, 1998
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Superchanger
Year: 1998
ITEM NO : 107242 QTY : 1 ALLOY : S SQ.FT. : 173 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS PLATES PSI (S) : 100 PSI (T) : 100 TEMP. DEG. F (S) : 225 TEMP. DEG. F (T) : 225 TUBE HOLES : 44 PLATES V/H : V CODE : YES SHELL NOZZLES : (2)4" TUBE NOZZLES : (2)4" FINISHED PRODUCT HEAT EXCHANGER; MFG. BY ...more
200 Ton, Beatty #20060N, Hydraulic Bulldozer Type Horizontal Press, 15" Stroke, 12" Cylinder diameter, 61" width x 14.5" H Platen, 60" x 77" Bed, 75 HP
Yoder Brothers Machinery | Toledo, OH
Category: Horizontal Presses
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Beatty
Model: 20060N
MODEL. 20060N, TONNAGE CAPACITY. 200 TON, STROKE. 15", CYLINDER DIAMETER. 12", PRESS PLATEN SIZE. 61" WIDE X 14-1/2" HIGH, PRESS PLATEN WIDTH. 18", PLATEN T-SLOTTED. YES, 3 T-SLOTS, BED SIZE. 60" F-B X 77" L-R, RESISTANCE PIN. 10" DIAMETER FLOOR TO BED. 30", PULL BACK CYLINDERS. (2) ON SIDE OF RAM, CONTROLS. FOOT ...more
32-1/4" x 46-1/4" x 3" T-slotted bolster plate, steel construction
Yoder Machinery Sales | Holland, OH
Category: Surface Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
LENGTH OF PLATE. 46-1/4", WIDTH OF PLATE. 32-1/4", PLATE THICKNESS. 3", T SLOTS LONGITUDINAL. 5, T SLOT CROSS DIRECTION. 5", T SLOT CENTER LONGITUDINAL. 8", T SLOT CENTER ACROSS. 6", HOLE IN CENTER OF PLATE. 3-3/4", T SLOT WIDTH AT TOP. 3/4", T SLOT DEPTH. 1", T SLOT WIDTH AT BOTTOM. 1", CONSTRUCTION. STEEL.
Doboy #751, automatic, single head, tray former, 10-60 trays per minute, Nordson (3) gun hot melt glue system & hooded seal area
Frain Industries | Carol Stream, IL
Category: Form Fill Sealing Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Doboy
Model: -751
Doboy, Model 751, automatic, single head, tray former. Rated from 10 to 60 trays per minute – depending on materials, application and machine configuration. Tray size range: 4" to 20" in Length; 3" to 17" in Width; 1" to 6" in Height. 36" long powered blank tray magazine, (3) ...more
27-3/4" x 63" x 35-3/4" Boxed T-Slotted angle plates, 1 set
Yoder Machinery Sales | Holland, OH
Category: Angle Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
HEIGHT OF PLATE. 63", WIDTH OF PLATE. 27-3/4, DEPTH OF PLATE (BOTTOM). 35-3/4", PLATE FACE THICKNESS. 2-1/4, NUMBER OF T SLOTS. 7", T SLOT CENTERS.8", T SLOT WIDTH AT TOP. 3/4", T SLOT DEPTH. 1-1/8", T SLOT WIDTH AT BOTTOM. 1-1/8", TOP AREA. 27-3/4 "X 35-3/4", T SLOTS ON TOP. 3, T SLOT CENTERS 8", STOCK # 79589 IS THE ...more
Quick #N-P50-04-08-EL-1PL-F-44-R-1Z, pneumatic w/fixed opening, 4' x 8' platen, 50 psi @ 100 psi supply, (18) 12.8" diameter air pods w/5.9" stroke, 44" opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: N-P50-04-08-EL-1PL-F-44-R-1Z
Year: 2026
QUICK N-P50 Fixed Daylight Opening Air Pod PressThis Pod Press can produce a maximum 50 PSI platen pressure over the entire surface at 100 PSI supply air pressure. Press has a fixed vertical daylight opening of 44". The (18) 12.8" max. diameter air pods have 5.9" stroke.Material conveyance is via automatically ...more
Burkle #Multifoiler-BTF1528-1400, Membrane Press, 59" x 110.2" Platen Capacity, 400 V., 2010
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: MULTIFOILER-BTF1528-1400
Year: 2010
BURKLE BTF 1528-1400 Automatic Pin Press with (2) Trays, and Panel Turnover Device.Designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without the use of a membrane. This configuration allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film ...more
27-3/4" x 16" x 6-3/4", T-slotted plate, 5 T-slots, #15494
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: T-SLOTTED PLATE
LENGTH OF PLATE. 27-3/4", WIDTH OF PLATE. 16", HEIGHT OF PLATE. 6-3/4", T SLOTS. 5, T SLOTS CENTER. 5-1/2", T SLOT WIDTH AT TOP. 5/8", T SLOT DEPTH. 1-1/4", T SLOT WIDTH AT BOTTOM. 1-1/4".
59" x 118", T-slotted floor plate
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: T-SLOTTED FLOOR PLATE
LENGTH OF PLATE. 118", WIDTH OF PALTE. 59", PLATE THICKNESS. 12", NUMBER OF T SLOTS. 6, T SLOT CENTERS. 12", WIDTH OF T SLOTS. 1-1/8", DEPTH OF T SLOTS. 2", WIDTH OF T SLOTS AT BOTTOM. 1-3/4", NUMBER OF LEVELING POINTS. 8, THROUGH TOP LEVELING. YES.
Niro #CC-21T, Fluid Bed Dryer/Coating Pan, Stainless Steel, 10 kg/batch Work capacity
Aaron Equipment Co | Schaumburg, IL
Category: Fluid Bed Dryers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Niro
Model: CC-21T
used- niro type fluid bed dryer/coating pan, type cc 21t. material of construction is aisi 304 (1.4301) stainless steel on product contact parts. working capacity of 10 kg (22 lbs) per batch. complete with watson malow pump, operating panel, control panel and additional infrastructure. previously used in a pharma ...more
192" x 80" x 12", T-slotted floor plate, access hole in top
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: T-SLOTTED FLOOR PLATE
LENGTH OF PLATE. 16', WIDTH OF PLATE. 80", PLATE HEIGHT. 12", NUMBER OF T SLOTS. 5, T SLOTS CENTERS. 16", T SLOT WIDTH AT TOP. 1", T SLOT DEPTH. 1-3/4", T SLOT WIDTH AT BOTTOM. 1-3/4", ACCESS HOLE IN TOP. YES.
RFS #SL-3660, radio frequency press, 36" x 60" x 2" cutting area, 2018
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Rfs
Model: SL-3660
Year: 2018
RFS SL 3660 Radio Frequency PressCuring area: 36" x 60" x 2" thick. -- Clamping pressure is applied by multi-power (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the ...more
157" x 80" x 13", Giddings & Lewis, T-slotted floor plate, 8 T-slots, #76802
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: GIDDINGS & LEWIS
LENGTH OF PLATE. 13'1", WIDTH OF PLATE. 80", PLATE HEIGHT. 13", NUMBER OF T SLOTS. 8, T SLOT CENTERS. 10", T SLOT WIDTH AT TOP. 1", T SLOT DEPTH. 2", T SLOT WIDTH AT BOTTOM. 2", LEVELING HOLE IN TOP. YES.
SMI #WP-600-Ergon, Wrap-Around Case Packer for Corrugated Cardboard Boxes
Revelation Machinery | Chicago, IL
Category: Case Packer Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Smi
Model: WP-600-ERGON
Year: 2020
Make: smi, Model: WP 600 Ergon, Year: 2020, Machine Location: Upon Request, SMI WP 600 Ergon Wrap-Around Case Packer for Corrugated Cardboard Boxes with SMI DV 500 S Ergon Multilane Product Divider, 2020:, Currently packing brick boxes of broth at 30 – 60 ppm depending on configuration, Presently set up for a ...more
Koyo No. KC-300A, centerless, twin grip, slant bed, 12" thrufeed work rest, stand alone electrical, Fanuc OM CNC controls, stepper compensation, parts conveyor, coolant tank & pump
GCH Machinery | Warren, MI
Category: Centerless Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Koyo
Year: 1991
KOYO KC-300 A SLANT BED CNC CENTERLESS GRINDER, S/N 9103.0355 Year:1991, STANDARD, Grinding capacity……………………….…………… 1.6 mm- 120 mm /.060 –4.72, Grinding wheel ...more
32 sq.ft., Alfa-Laval, Plate Heat Exchanger, (16) 17" W x 47" H x 3/8" thick graphite plates, 21 liter volume, 8 bar, 180°C, 1997
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alfa-Laval
Year: 1997
Plate heat exchanger, 32 sq. ft., (16) graphite plates, 17" wide x 47" high x 3/8" thick. Manufactured by Alfa Laval, 21-liter volume, max design of 8 bar and 180 deg. C. Plates manufactured by SGL Technik, type S10N, material 940-DIA-NSI-G16-5-200. On frame with (2) 4" top flanged nozzles and (2) 3" bottom flanged ...more
216" x 79" x 14-1/2", giddings & lewis t-slotted, 6 T-slots, #73825
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: GIDDINGS & LEWIS T-SLOTTED
WIDTH OF PLATE. 79", LENGTH OF PLATE. 18', PLATE THICKNESS. 14-1/2", T SLOTS. 6, T SLOT CENTERS. 12-1/2", T SLOT WIDTH AT TOP. 1-3/8", T SLOT DEPTH. 2.3/4", T SLOT WIDTH AT BOTTOM. 2-1/2".
6000 lb. ATI, Upender/Die Turnover, 102.5" x 71" Deck, 102.5" x 60" Clamp Plate, 62" Gap, 2 HP
Met-Pro Machinery Inc | Detroit, MI
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: ATI, Believed to be a 6,000lbs capacity but must verify, 102.5" x 71" Deck, 102.5" x 60" Clamp Plate, Gap: 62" max. open, approx. 17 Closed, 2HP motor, 1" Plate construction, ***With Controls, Operators Station, 2 extra E-stops, (2)Banner Light, Curtains(2 senders, 2 receivers for two curtains), Conduit & ...more
72" x 276" x 9-1/2" T-slotted surplace plate, cast iron construction, #66102
Yoder Machinery Sales | Holland, OH
Category: Surface Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
LENGTH OF PLATE. 23' (273"), WIDTH OF PLATE. 72", PLATE THICKNESS. 9-1/2", NUMBER OF T SLOTS. 11", LENGTH OF T SLOT. 62", T SLOT CENTERS. 24", WIDTH OF T SLOT AT TOP. 1", DEPTH OF T SLOT. 2", WIDTH OF T SLOT AT BOTTOM. 2", CAST IRON CONSTRUCTION. YES.
Pearson #GTL-AN1, automatic, all in one, pick and place, case or tray erector, top load packer, hot melt glue sealing system, 25-150 packages & up to 10 cases or trays per minute
Frain Industries | Carol Stream, IL
Category: Case Packer Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pearson
Model: GTL-AN1
Pearson Model GTL-AN1, automatic, all in one, pick and place, case or tray erector, top load packer, hot melt glue sealing system rated from 25 to 150 packages and up to 10 cases or trays per minute – depending on materials, application and machine configuration. Erected case or tray size range: 8" to ...more
50" Boere #Elite-1300-TKKC 3-Head Sander, 2002
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Boere
Model: ELITE-1300-TKKC
Year: 2002
50” width, drum/drum/platen heads, 480 volt 3-phase, Bottom and top sanders can be sold separately, Pictures coming for bottom sander.
43 sq.ft., API, SM25-500-18, heat transfer plate heat exchanger, (18) plates, 150 psi
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Api
ITEM NO : 113900 QTY : 1 ALLOY : S SQ.FT. : 43 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 212 TEMP. DEG. F (T) : 212 TUBE HOLES : 18 PLATES V/H : V TEMA TYPE : PLATE SHELL NOZZLES : 2-4" TUBE NOZZLES : 2-4" Unused API Heat Transfer Plate Heat ...more
Heesemann #KSA-8, Lacquer/Sealer Sander, 80.7" x 128" abrasive belt, 35 & 42 HP dual speed motor, 9.8" diameter rotary panel cleaning brush, 480 Volt, 2007
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Heesemann
Model: KSA-8
Year: 2007
HEESEMANN - KSA 8 CSD,.Lacquer/Sealer Sander w/80" Belt WidthThis is a Very Special "extra wide" HEESEMANN : HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 5/8" (16 mm) sense part configuration; pressure for each segment can be preprogrammed to provide less pressure on the ...more
Amada #LM-F070A-HP, Fiber Laser Marker, 70 Watt, 2024
Revelation Machinery | Chicago, IL
Category: CNC Lasers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Amada
Model: LM-F070A-HP
Year: 2024
Make: Amada, Model: LM-F070A-HP, Year: 2024, Machine Location: Upon Request, Laser Type: Ytterbium Fiber Laser, Power Output: 70 Watts, Operating Temperature: 59°F – 104°F, Motion Control: Up to 4 Axes, Electrical: 130V, Single-Phase, Frequency: 50/60 Hz, Approximate Controller Dimensions: 17″ x ...more
411 sq.ft., Kelvion, NF150LBA150, plate heat exchanger, 316L Stainless Steel, rated 145 psig @ 230°F, 2021
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Kelvion
Year: 2022
ITEM NO : 114151 QTY : 1 ALLOY : S SQ.FT. : 411 MATERIAL (S) : CS FRAME MATERIAL (T) : 316LSS PLATES PSI (S) : 145 PSI (T) : 145 TEMP. DEG. F (S) : 230 TEMP. DEG. F (T) : 230 TUBE HOLES : 51 V/H : V CODE : NB SHELL NOZZLES : (2)6" TUBE NOZZLES : (2)6" 411 sq. ft. Plate Heat Exchanger, Mfg. by Kelvion in ...more
16 Stand, Van Huffel, 1.5" dia arbor, 30 HP, 210 FPM, rollformer, 6" dia arbor roll space, #10499
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Van Huffel
Roll Diameter1.5 inchesNumber of Stands16 Diameter of Arbor1.5 inchesPower30 horsepower, NUMBER OF STANDS. 16, ARBOR DIAMETER. 1.5", ROLL SPACE. 6", VERTICAL ADJUSTMENT. 4” to 6”, HORIZONTAL CENTERS. 9”, SIDE PASS ROLLS. 16 (1 BETWEEN EACH STAND), BASE TO LOWER CENTER. ...more
12 NEW Weiler 8" Counter Duster, Grey Tampico Fill, Medium Brushing, 44004, 12pc
Jack Wilkerson Industrial Surplus | Gonzales, LA
Category: Electrical MRO Components & Parts
Seller: Jack Wilkerson Industrial Surplus
Location: Gonzales, LA
Mfr: Weiler
For sale is one (1) new unused case Weiler 8" Counter Duster. Part number: 44004. Grey Tampico Fill, Medium Brushing., Ro Hs, Compliant, Brand ID, Weiler, Industry, Facility Maintenance, Manufacturing, Fill Color, Grey, Application, Cleaning, Block Color, Tan, Performance, Performance, Trim Length, 2-1/2 IN, Handle ...more
Multiquip VP MVH408, Vibratory Plate Compactor, S/N: J-10210, 2024
Wheeler Machinery | Salt Lake City, UT
Category: Vibratory Tandem Rollers
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Model: VP MVH408
Year: 2024
20" X 35" PLATE, AIR-COOLED, SINGLE-CYCLINDER, CENTRIFUGAL FORCE: 12,365 LBS, HATZ DIESEL, MULTIQUIP, OPERATING WEIGHT: 933 LBS., PRICED NEW 01/19/24 KR, REVERSIBLE VIBRATORY PLATE.
JUST ADDED!
Haas #UMC-500SS, 5-Axis Universal Machining Center, 24" X, 16" Y, 16" Z, 15.7" platter, 30 HP, 12,000 RPM, 50 automatic tool changer, BT-40, thru spindle coolant, 2021
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: UMC-500SS
Year: 2021
Used 5-axis universal machining center. s include 12,000 RPM, 50 ATC, BT-40 taper, and 300 PSI thru spindle coolant., Platter Diameter 15.7", Max Weight on Platter 500 Lbs, Max Cutting Feedrate 650 IPM, Rapid Feedrate 900 IPM.
Hilles & Jones #2, bar & billet shear, 10 HP, 8" blade length, 10" btwn housing, #62794
Yoder Machinery Sales | Holland, OH
Category: Bar and Billet Shears
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hilles & Jones
Model: 2
MODEL. 2, LENGTH OF BLADES. 8", DISTANCE BETWEEN HOUSING. 10", CAPACITY SPLITTING PLATES. 5/8", CAPACITY TRIMMING PLATES. 3/4", CAPACITY BEVELING PLATES. 3/4", CAPACITY FLAT BARS. 6" X 3/4", CAPACITY ROUND BARS. 1-3/8", SINGLE HAND LEVER. YES, MOTOR. 10 HORSEPOWER.
30 Ton, UCG, 4-post pneumatic cut-off press, 3 stroke, 36" between post, 2025, new
Universal Tube & Rollform | Perrysburg, OH
Category: Cut-off Presses
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Year: 2025
UTUBE NUMBER: 4199, MANUFACTURER: UCG, YEAR: 2025, Capacity: 30 Ton, Stroke: 3″, Distance Between Posts: 36″, Bolster Plate with slug drop 2.75″ x 24″ x 32″ with 3 different rail positions., Ram Plate 1.75″ x 24″ x 32″ with slot For T rail plate., Top plate 1.75″ x ...more
Bodor #T360-65, fiber laser metal tube cuttin machine, 6000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: T360-65
FIBER LASER CUTTING MACHINE: Laser Power 6kw Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 2*40'HQ Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free labor. Optional: T-Loader2-65 ...more
35 Ton, Keystone, 4-post up-acting hydraulic trim press, 14" stroke, 30" daylight, 1995
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Keystone
Year: 1995
MODE L#: N/A, SERIAL #: 3904, 35 TONS MAXIMUM CAPACITY, 14" STROKE, 47" LR x 35" FB RAM AND UPPER PLATEN, 36" LR x 24" FB DISTANCE BETWEEN POSTS, 4 POSTS @ 3-1/2" DIAMETER, 30" DAYLIGHT OPENING, 115" OVERALL HEIGHT, 70" DISTANCE FLOOR TO BOTTOM OF UPPER PLATEN, T-SLOTTED LOWER RAM AND UPPER PLATEN, UP ACTING RAM, DUAL ...more
Caterpillar CB13 OSC, Twin Drum Roller, 819 hours, S/N: PWP01399, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Double Drum Compaction Rollers
Seller: Ring Power Cat - Heavy Machinery
Location: 14300 Ponce De Leon Blvd., FL
Mfr: Caterpillar
Model: CB13 OSC
Year: 2024
BELT, ENG, CONTROL, PREMIUM, DRUM, SOLID W/OSCILLATION STD, ENGINE, CAT C4.4, HITCH, OFFSET, INSTRUCTIONS, ANSI, LANE 3 ORDER, LANGUAGES, OPTION 1, LIGHTS, BEACON, LIGHTS, LED, ROPS, LIGHTS, WORKING, MATS, COCOA, NOZZLES, STANDARD, OIL, HYD, STANDARD, Online Owner's Manual, PACK, DOMESTIC TRUCK, PLATFORM ...more
Biesse Spark-3.3, Compact Edgebander, 3 mm material thickness, 10 mm min. panel thickness, 40 mm panel thickness, 90 min width, 140 mm min. L, 2016
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: SPARK 3.3
Year: 2016
BIESSE SPARK 3.3 Edgebander (Compact)0.4 mm to 3 mm material thickness. Min. panel thickness 10 mm, max. panel thickness 40 mm. Min. panel width 90 mm, min. panel length 140 mm.: -- 2 Liter Glue Teflon coated tank with quick heating system. -- Top pressure beam with manual adjustment through numerical read-out ...more
Hall #3H, permanent molding machine, s/n 9702987, with controls and hydraulics
FL Sales Inc | Solon, OH
Category: Foundry Molding Machines
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Hall
Model: 3H
hall model 3h permanent molding machine s/n 303987 w, two cylinder style machine, post for casting catcher, 28" x 42" platen, no controls.
804 sq.ft., Alfa-Laval, H10-RC, Stainless Steel plate & frame heat exchanger, 145 psi, 119 plates, serial #3906, 1982, #36821
Federal Equipment Company | Cleveland, OH
Category: Plate and Frame Heat Exchangers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Alfa-Laval
Year: 1982
Used 804 sq ft Alfa Laval plate and frame heat exchanger, model H10-RC, stainless steel construction, approximately 804 sq ft surface area with (119) 19.75" wide x 57" high plates, rated 145 psi at 285 °F, stainless steel side rails and covered ends, serial# 3906, built 1982.
59 Met Chem/Hoesche, plate and frame filter press, 195 cu.ft., non-gasketed, 110 plates, Hydraulic system
D'Angelo International | Bellingham, WA
Category: Plate and Frame Filter Presses
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Met Chem
- 1,500 mm non-gasketed plates, - 110 plates, - Plate and frame press, - Hydraulic system, - Hyundai crown triton motor, - Reconditioned in 2016, - 195 cubic feet, - Removed and ready for inspection and shipment.
Nilson #S-0, 4-slide, 1/16" wire diameter, 1" strip width, 6" feed length, 95-290 SPM, solid cams
Hariton Machinery Co Inc | Bridgeport, CT
Category: Wire Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nilson
Model: S-0
One Used Nilson Model S-0 Fourslide Machine, Serial No 58145, 1/16" Wire Diameter, 1" Maximum Strip Width, 6" Feed Length, 95-290 SPM, Solid Cams, Single GIB, 2 Plane Straightener, Mechanical Clutch and Mechanical Vari Drive, AC Motor and Controls, Located FOB Bridgeport, CT Warehouse.
1 HP Myers #RAM, Can Press Out Stand, 18" diameter platen, 208-230/460 V., 1990
Federal Equipment Company | Cleveland, OH
Category: High and Low Speed Dispersers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Myers
Model: RAM
Year: 1990
Used Myers can press out stand, model RAM, approximately 18" diameter platen, with 1 hp, 208-230/460 volt on board hydraulic unit, serial# 163, built 1990.
37 sq.ft., Alfa-Laval, Plate Heat Exchanger, 150 psi, 300°F, 2011, #108633
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2011
ITEM NO : 108633 QTY : 1 ALLOY : S SQ.FT. : 37.9 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 18 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : U-STAMPED 37.9 SQ. FT. PLATE HEAT EXCHANGER; MFG. BY ALFA LAVAL IN 2011; ...more
100 cu.ft. Con-vey Systems, Continuous Paddle Mixer/Dryer, 4' diameter x 9' L jacketed chamber, (26) 10" x 5" x 1-3/4" thick paddles, 40-45 degree angle paddles, 125 HP, 1785 RPM, 230/460 V, qty. 2
Machinery & Equipment Co | Brisbane, CA
Category: Paddle Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Con-Vey Systems
(2) Continuous paddle mixer, approximately 100 cubic feet capacity, jacketed chamber, measures 4' diameter x 9' long, stainless steel chamber with stainless steel paddles. Includes (4) rows of paddles, (26) paddles total, 10" x 5" x 1-3/4" thick, paddles are fixed to 6" diameter cored center shaft for heating ...more
1880 Ton, 540 oz., Cincinnati Milacron #ML1880-540, horizontal plastic injection molding machine, Xstreem ST, Wittmann W873 robot, 2000
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Cincinnati Milacron
Model: ML1880-540
Year: 2000
, 2000 1880 Ton Cincinnati Milacron ML1880-540:, Shot size: 540 Oz., Tie bar spacing: 72 x 55.12, Platen size: 74 x 76, Control: Xstreem ST, Retractable tie bars: Top non op side., a 2012 Wittmann W873 Robot., Machine is under power and in production., It's in good running conditions., Imperial Metric Tonnage ...more
Labnet Labnet International #P2, Orbital Shaker
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Labnet International
Model: P2
Labnet Orbit P2 Digital Shaker with stainless steel platen, serial no 307, 115V-50.
Bolster plate, 83-7/8" x 60" x 7", 13 T-slots
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
WIDTH OF PLATE. 83-7/8", LENGTH OF PLATE. 60", THICKNESS OF PLATE. 7", NUMBER OF T SLOTS. 13, CENTER DISTANCE BETWEEN SLOTS. 6", WITH OF T SLOTS. 1", DEPTH OF T SLOTS. 2-1/8", WIDTH OF T SLOTS AT BOTTOM. 1-3/4", WEIGHT. 8925 LBS.
Paul Mueller, Accu-Therm, Plate Heat Exchanger, AT4, ICC-150, 18 Plates, Stainless Steel
Reclaim Source Corp | Muskegon, MI
Category: Plate and Frame Heat Exchangers
Seller: Reclaim Source Corp
Location: Muskegon, MI
Mfr: Paul Mueller
(2) Units Available Price is per unit. | Stainless Steel | Sanitary Tri-Clamp Connections, Manufacturer: Paul Mueller Company, Model: AT4 ICC-150, Serial #: 1909291-01, Year Built: 2019, Design Pressure: 75 PSI @ 150°F, Plate Count: 18, Material: 316L Stainless Steel Plates, Gaskets: EPDM or Nitrile (Sanitary ...more
500 sq.ft., Alfa-Laval, CLIP8RH, plate heat exchanger w/divider block & snap-in gaskets, (101) 16" W x 48" H Stainless Steel plates, 3-1/4" thick divider block, 225 psi @ 230°F, 1999
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alfa-Laval
Year: 1999
Alfa Laval Stainless Steel Plate Heat Exchanger with Divider Block and Snap-In Gaskets, Model CLIP8RH, Serial number 30104-98746, approximately 500 square feet of surface area. Rated for 15.5 bar (225 PSI) @ 110 degrees C (230 degrees F). Includes a total of (101) 16" wide x 48" high stainless steel plates - (57) ...more
32 Ton, Rousselle #G1-32, gap frame press, 2" stroke, 10-1/2" Shut Height, air clutch & brake, 140 SPM, 1996
Yoder Machinery Sales | Holland, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rousselle
Model: G1-32
Year: 1996
SERIAL. P-32647, MODEL. G1-32, YEAR NEW. 1996, CAPACITY. 32 TON, STROKE OF SLIDE. 2", SLIDE ADJUSTMENT. 2-1/2", SHUT HEIGHT, SDAU. 10-1/2, STROKES PER MINUTE. 140, AREA OF BED. 24" X 15", AREA OF SLIDE. 12" X 9", WIDTH OF HOLE THROUGH BACK. 16", TOP (SLIDE) BOLSTER. 32" X 24" X 2", DEPTH OF THROAT. 8-1/2", AIR CLUTCH ...more
Amada Miyachi Unitek #WL-P300A, Fiber Laser Workstation, 50 Watt, 2024
Revelation Machinery | Chicago, IL
Category: CNC Lasers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Miyachi Unitek
Model: WL-P300A
Year: 2024
Make: Amada, Model: WL-P300A, Year: 2024, Machine Location: Upon Request, Laser Type: Fiber Laser, Laser Source: LM-F050A, Class: CDRH Class 1 Laser System, Electrical: 90 – 130V, Single Phase, Frequency: 50/60 Hz, Closed Enclosure Dimensions: 33.3″ x 34.3″ x 41.8″, Open Enclosure Dimensions: ...more
32 Ton, Rousselle #G1-32-4, gap frame press, 2" stroke, air clutch & brake, 70 SPM, 2003
Yoder Machinery Sales | Holland, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rousselle
Model: G1-32-4
Year: 2003
SERIAL. P-33203, MODEL. G1-32-4, YEAR NEW. 2003, CAPACITY. 32 TON, STROKE OF SLIDE. 3", SLIDE ADJUSTMENT. 2", SHUT HEIGHT, SDAU. 14", STROKES PER MINUTE. 70, AREA OF BED. 24" X 15", AREA OF SLIDE. 12" X 9", WIDTH OF HOLE THROUGH BACK. 16", TOP (SLIDE) BOLSTER. 32" X 24" X 2", DEPTH OF THROAT. 8-1/2", AIR CLUTCH AND ...more
10 Ton, XU SHI #HAG E 10 Z, Vertical Mold Injection Press, 2021 #3
Revelation Machinery | Chicago, IL
Category: Molding Compression Hydraulic Presses
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Xu Shi
Model: HAG E 10 Z
Year: 2021
Make: XU SHI, Model: Hag E 10 Z, Year: 2021, Machine Location: Illinois, Vertical Clamping Force: 100kn., Top Core:, Top Core Carriage on Top of the Machine Frame., Top Core Cylinder Stroke: 950mm, Linear Sensor with Power-Off Memory Function., Distance Between the Core-Pulling Plate and the Equipment Center: Min. ...more
JUST ADDED!
250 Amp. Siemens, Column Panel, 42-Circuit, Copper Bus, I-Beam Mount, 208Y/120 Volts, 3 Phase, 4 Wire
Quantum Technology | Shippensburg, PA
Category: Panelboards (Switchboards)
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Siemens
Panel 1:42x Siemens single 20 Amp breakers NE-7128Panel 2:29x Siemens single 20 Amp breakers NE-7128Panel 3: SOLD38x Siemens single 20 Amp breakers NE-71281x Siemens 2 pole 20 Amp breaker L-55381x Siemens 2 pole 30 Amp breaker NE-7139Panel 4:35x Siemens single 20 Amp breakers NE-7128Panel 5:Panel 6:40x Siemens single ...more
24" x 72" x 43" Giddings & Lewis, T-slotted angle plate, cast iron, machined face
Yoder Machinery Sales | Holland, OH
Category: Angle Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Giddings & Lewis
WIDTH OF PLATE. 24", HEIGHT OF PLATE. 72", DEPTH OF PLATE. 43", FACE THICKNESS. 3-1/8", NUMBER OF T SLOTS. 18, T SLOT CENTER. 4", T SLOT WIDTH AT TOP. 7/8", T SLOT DEPTH. 1-1/2", T SLOT WIDTH AT BOTTOM. 1-3/4", CAST IRON. YES, MACHINED FACE. YES.
220 KVA Heron #DB-220, MFDC projection & spot welder, 12/18" throat, brand new
T J Snow Co Inc | Chattanooga, TN
Seller: T J Snow Co Inc
Location: Chattanooga, TN
Mfr: Heron
Model: DB-220
Machine, Stock Number: DB-220, Name: HERON 220 KVA MFDC Projection & Spot Welder, BRAND NEW!, Transformer: 220 KVA, Manufacturer: Heron, Mfg. Model Number DB-220, Voltage: 440/460/480 Volts, Three Phase, Throat Depth: 12/18" in, Secondary Volts: 10.4, Secondary Amps: 40,000, Air Type: Adjustable/Retractable ...more
36" Eimco, Shriver #36-12-PP-RP-HS-100-1, 36" x 36" polypro recessed plates, 13 plates, 7.8 cu.ft. cake capacity, 3 HP hydraulic power unit, 1980
Ingalls Process Equipment | Painesville, OH
Category: Plate and Frame Filter Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Eimco
Model: 36-12-PP-RP-HS-100-1
Year: 1980
one(1) used Eimco/Shriver Filter Press. Model 36-12-PP-RP-HS-100-1.50 Serial no. 41115-02/29237. built 1980. 36" x 36" Polypro. Recessed Plates. (13) plates. 7.8 cu ft cake capacity. 100 psi max. filter pressure. Overall dimensions 18' long x 52" wide x 68" high. Hydra Shift Mechanical plate shifter. 3 hp ...more
32" x 32" MW Watermark #FP800G32L-19/37-10/20ASX, Filter Press, 100 PSI, 4300 PSI Relief Pressure, 40 Plates, 20 cu.ft.
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Filter Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mw Watermark
Model: FP800G32L-19/37-10/20ASX
M.W. Watermark 800mm Recessed Chamber Plate & Frame Filter Press, Model FP800G32L-19/37-10/20ASX. Includes (40) gasketed polypropylene recessed chamber filter plates. Rated for 20 cubic-feet cake capacity. The operation blends air over hydraulics, employing 2-gauge & 2-switch controls for precise command. ...more
19-3/4" x 48" x 24" T-Slotted Angle Plates, 9 t-slots
Yoder Machinery Sales | Holland, OH
Category: Angle Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
WIDTH OF PLATE. 19-3/4", HEIGHT OF PLATE. 48", DEPTH OF PLATE. 24", NUMBER OF T SLOTS. 9, T SLOT CENTERS. 5", T SLOT WIDTH AT TOP. 5/8, T SLOT DEPTH. 1-1/4", T SLOT WIDTH AT BOTTOM. 1-1/4", MADE OUT OF CAST IRON. YES.
30" x 30" Seitz Enzinger Noll #OF-100/200, polishing filter press, 75 plates, 30" x 30" x 1/2" plates, Stainless Steel
EcReCon Inc. | Pedericktown, NJ
Category: Plate and Frame Filter Presses
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Seitz
Model: OF-100/200
Year: 1991
, Seitz Enzinger Noll Orion Stainless Steel Polishing Filter Press - Type OF 100/200. (75) 39" x 39" (100 cm) Plates. 0.5" Plate Thickness. Overall dimensions = 23' lgth. x 7' ht. x 5' wide., 1991 Seitz Enzinger Noll Stainless Steel Polishing Filter Press, Material. STAINLESS STEEL, Type. PLATE/FRAME.
43-1/2" x 59" x 4" T-slotted steel layout plate
Yoder Machinery Sales | Holland, OH
Category: Layout Tables
Seller: Yoder Machinery Sales
Location: Holland, OH
LENGTH OF PLATE. 59", WIDTH OF PLATE. 43-1/2", PLATE HEIGHT. 4", LONGTUDINAL T SLOTS. 5, CROSS T SLOTS. 1, T SLOT CENTERS. 6", T SLOT WIDTH AT TOP. 1", T SLOT DEPTH. 1-1/2", T SLOT WIDTH AT BOTTOM. 2".
