Buy or Sell Your Jointer Planers

225 TON X 10' CINCINNATI MODEL #9 AUTO CYCLE AIR CLUTCH MECHANICAL PRESS BRAKE: STOCK #21130 SERIAL. 37290 MODEL. 9 AUTO CYCLE CAPACITY. 225 Ton BED LENGTH. 10', BETWEEN HOUSINGS. 8'6" STROKE. 3", SHUT HEIGHT. 12", RAM ADJUSTMENT. 5" MOTORIZED, THROAT. 8", AIR CLUTCH. 2 SPEED, COUNTER BALANCE. AIR, SURGE ...more

One (1) used 1 gallon Buflovac Equipment Lab Grease Mixer 6" diameter x 10.5" straight wall with dish bottom Stainless steel contact parts Removable electrically heated jacket around the tank Port for thermocouple in side of tank Vacuum port coming out of top Miscellaneous top inlets Pneumatic cylinder ...more

TIE ROD FRAME CONSTRUCTION, DOUBLE BACK GEARED, RATED CAPACITY TONNAGE: PLUNGER 150, BLANKHOLDER 110, STROKE: PLUNGER 22", BLANKHOLDER 15", SHUTHEIGHT: PLUNGER 30", BLANKHOLDER 28", ADJUSTMENT OF PLUNGER AND BLANKHOLDER 6", BED AREA 30" X 30", RAM AREA PLUNGER 14" X 11", RAM AREA BLANKHOLDER 24" X 26", BOLSTER AREA ...more

Caterpillar Model 3512TA Mounted in 2022 Fully Customized 40’ ISO Sound Attenuated Container on Tandem Axle Chassis, Premium Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT Generator with Digital Voltage Regulator, Circuit Breaker, Camlock Distribution, Electronic Governor, Standard Duty ...more

GEA plate-type heat exchanger, Model number NT100T BYF-150, includes approximately (16) 316 stainless steel, measuring 34" x 18" plates, frame has additional 24" to accommodate more plates. Set up as 4-eye closed delivery. Rated for 140 PSI at 350 degrees Fahrenheit to 32 degrees Fahrenheit sides A & B. Serial ...more

WIDTH OF PLATES. 60", LENGTH OF PLATES. 72', PLATE THICKNESS. 6", HEIGHT ON STAND. 31", NUMBER OF HOLES. 340, SQUARE HOLE DIMENSION. 1-3/4" X 1-3/4", HOLE CENTERS. 3-1/2", CAST IRON CONSTRUCTIONS. YES.

WIDTH OF PLATE. 24", HEIGHT OF PLATE. 36", LENGTH OF BASE. 15", FACE THICKNESS. 1-7/8", DRILL HOLES. YES.

Tranter Superchanger, Model# GCP-026-L-5-HR-20, Surface Area 50.38 Sq Ft, Plate pack dimensions MIN 3.44" MAX 3.66", **We will work with you if pick up is not an option. We will, palatalize and have ready for pick up at no charge. Feel free to contact, us with any information you need to set up pick up with your ...more

Tranter Superchanger, Model# S-3-UJ-32, Surface Area 101.4 Sq Ft, Plate pack dimensions MIN 6.25" MAX 6.38", **We will work with you if pick up is not an option. We will, palatalize and have ready for pick up at no charge. Feel free to contact, us with any information you need to set up pick up with your preferred ...more

Tranter Superchanger Heat Exchanger, Model# GCP-051-L-5-HP-48, Surface Area 267.38 Sq Ft, Plate pack dimensions MIN 8.38" MAX 8.63", **We will work with you if pick up is not an option. We will, palatalize and have ready for pick up at no charge. Feel free to contact, us with any information you need to set up pick up ...more

HEIGHT OF PLATE. 50", WIDTH OF PLATE. 22-3/4, DEPTH OF PLATE (BOTTOM). 36", PLATE FACE THICKNESS. 6", NUMBER OF T SLOTS. 7", T SLOT CENTERS.7", T SLOT WIDTH AT TOP. 3/4", T SLOT DEPTH. 1-1/8", T SLOT WIDTH AT BOTTOM. 1-1/8".

PLATE WIDTH. 18", PLATE HEIGHT. 36", PLATE DEPTH. 18", NUMBER OF HORIZONTAL T-SLOTS. 7, T-SLOT WIDTH. 5/8", T-SLOT DEPTH. 1-1/4", T-SLOT WIDTH @ BOTTOM. 1-1/4", T-SLOT CENTER DISTANCE. 5-1/2", CONSTRUCTION OF PLATE. CAST IRON.

Alar Model Micro-Klean Hydraulic, plate and frame, filter press rated at 20 minutes per filtration cycle. eleven 19-1/4" Long x 19-14" Wide x 2-1/4" thick recessed polypropylene filtration plates, hydraulic opening and closing ram. Filtration area: 15.4ft². Volume: 2.3 ft³, with two ...more

SKU: 151071, Model: Prima Plus 7.3 r-a ONE, Year: 2021, Condition: Used, S/N: 6667, Electrical :, Voltage: 230 volts, Phase: 3-phase, CNC: Yes, Dimensions: 60.00 (H) x 48.00 (W) x 168.00 (L) inches, Additional :, s:, - 12" touch screen control capable of storing machine settings, - Automatic machine adjustments ...more

Plate & frame filter press, rated for approximately 175 sq. flat top. of surface area, approximately 7 cu. flat top. of cake capacity, complete with (28) 30" x 30" x 2-1/2" thick polypropylene plates, 1/4" recess. Manufactured by Ontrac. Includes 4 eye closed delivery and complete with hydraulic closure. Number of ...more

Automatic, horizontal form / fill / seal capable of up to 40 packages per minute. Has 2 1/8" minimum package length, 1" minimum package width, six paired rollers, 4-sided sealing, 16"W sealing head, cut-off knife, and two lateral cutting wheels. Electrocam PLS, Direct Logic PLC, E-stop, top/bottom ...more

CX WINDING MACHINE, WIRE RANGE: 0.2 - 1 MM; MAX TORQUE: 3 X 1 MM WIRE; STROKES: LAYERING 200 MM; VERTICAL 80 MM; LATERAL 350 MM; MAX WINDING SPEED: 700 RPM ON A 20 MM POLE HEIGHT AND 3 WIRES 0.5 MM; WORKING AREA: 500 MM; (3) MT4 ELECTRONIC PROGRAMMABLE TENSION DEVICES; SPECIAL WIRE GUIDE BAR INCLUDING (3) WIRE FEED ...more

Rotary Pressure Sensitive Labeler Gernep, Model Soluta 10-64, 10-head, Servo driven bottles plates up to 11.5" diameter labels rolls, 6" labels height, capacity 185 to 200 bottles per minute powered unwind and rewind, web roll auto detects, for glass and PET plastic bottles, 4" X 9' tabletop conveyor, star feed ...more

ITEM NO : 108981 QTY : 1 ALLOY : S SQ.FT. : 7.37 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 347 TEMP. DEG. F (T) : 347 TUBE HOLES : 10 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : YES CIP HEATER; MFG. BY ALFA LAVAL IN 2010; MODEL #TS6-MFG; PLATE ...more

Item 3034-1 One (1) Used PHI Lab Press, 14" x 12" platens, 20 Ton, electric platens, individual controls, (2) adjustable daylights, self contained hydraulic unit, slab side type.

Kliklock Model Vari-Right, Inline, Tri-Seal top load carton closer rated from 30 to 120 cartons per minute – depending on materials and application. Construction: Fully welded stainless steel frame and shafts, nickel plated chains, pulleys and sprockets. with clear ….

2014 STRUERS Hexamatic lab prep machine for efficient grinding and polishing. Enhance your specimen processing with this robust, used automatic equipment., EXTREME, VERSATILITY, For the preparation of both individual specimens and specimen holders, With or without conveyor, for the uninterrupted preparation of larger ...more

Fanuc, 4 axes, servo driven, robotic case palletizing, automatic pallet stretch wrapper. Unit is capable of moving product from floor level up to 123" in height, and has range of motion of 720 degrees, rated up to maximum pick-up weight of 185 Kg. vacuum pic-n-place head mounted on robotic arm with 123.72". ...more

Cutoff Diameter 6mm Die Kickout (1st) 52 Die Kickout (2nd) 30 Cutoff Length 40mm Pieces per Minute 50-170 Motor and AC Controls AC Motor and Controls Weight 11,000 Lbs., Single Plane Straightener.

SERIAL.3202, LENGTH OF PLATE. 66", WIDTH OF PALTE. 62", PLATE THICKNESS. 6", WORKING AREA OF PLATE. 62" X 62", T SLOTS. 5, T SLOT CENTERS. 10", T SLOT WIDTH AT TOP. 1-1/8", T SLOT DEPTH. 2", T SLOT WIDTH AT BOTTOM. 2-1/8", ANCHOR HOLE. 4.

HEIGHT OF PLATE. 36-1/4", WIDTH OF PLATE. 18-1/2", DEPTH OF PLATE (BOTTOM). 20", PLATE FACE THICKNESS. 2-1/8, NUMBER OF T SLOTS. 5, T SLOT CENTERS.7", T SLOT WIDTH AT TOP. 1", T SLOT DEPTH. 1-1/2", T SLOT WIDTH AT BOTTOM. 1-1/2".

HEIGHT OF PLATE. 27-1/4", WIDTH OF PLATE. 24", DEPTH OF PLATE (BOTTOM). 20-3/4", PLATE FACE THICKNESS. 2", NUMBER OF T SLOTS. 4", T SLOT CENTERS. 6-1/2", T SLOT WIDTH AT TOP. 3/4", T SLOT DEPTH. 1-1/8", T SLOT WIDTH AT BOTTOM. 1-1/8".

HEIGHT OF PLATE. 47", WIDTH OF PLATE. 18", DEPTH OF PLATE (BOTTOM). 24-3/8, "PLATE FACE THICKNESS. 3-3/4, NUMBER OF T SLOTS. 8", T SLOT CENTERS. 4-1/2", T SLOT WIDTH AT TOP. 3/4", T SLOT DEPTH. 1-1/2", T SLOT WIDTH AT BOTTOM. 1-1/2".

CUTOFF DIAMETER 3/16", MAXIMUM SHANK LENGTH 1 3/8", MAXIMUM CUTOFF LENGTH 2 3/8", PIECES PER MINUTE 450, ELECTRICS 10 HORSE POWER AC MOTOR AND CONTROLS 230/460 VOLTS, WEIGHT 8000 LBS., KICK PIERCE MECHANISM FOR MAKING SEMI TUBULAR RIVETS, 5 ROLL SINGLE PLANE STRAIGHTENER.

- Durco-style plate and frame filter press, - Unit to be refurbished prior to shipment ( below), - 1200 mm plates, - 80 plates, - Non-gasketed plates, - 95 cu ft filter volume, - Center feed with 4-corner return, - Automatic hydraulics, Reconditioned filter presses are supplied with new cloths, cleaned plates, new ...more

HiPoint Model NZK8E CNC Machining Center Min Panel Length: 280mm Min/Max Panel Width: 120mm/1000mm Min/Max Panel Thickness: 10-40mm Vertical Spindle Stroke: 60mm Vertical Spindle RPM: 6000 RPM Vertical Spindle Tooling: 10mm Horizontal Spindle Stroke: 60mm Horizontal Spindle RPM: 4740 RPM Horizontal Spindle Tooling: ...more

LENGTH OF PLATE. 70", WIDTH OF PLATE. 50", PLATE THICKNESS. 6-1/4", HEIGHT ON STAND. 32", SLOTS RUNNING 70" DIMENSION. 10, SLOTS RUNNING 100" DIMENSION. 7, 4 LEVELING HOLE IN TOP. YES, FABRICATED STAND. YES, LEVELING SCREWS. YES, 16 OF THESE PLATES IN STOCK CAN BE BOLTED TOGETHER TO MAKE A LARGE PLATE.

Used Lyle Industries thermoformer, model 125FT, dual forming stations, approximately 29" wide x 25" long platens, 5" stroke, 7' long oven with top quartz heater, bottom calrod heaters, control panel, 7.5 hp hydraulic pump, 102 amp max draw, 480 volt, serial# 104010017-032120.

Brand/Model: Hazelton 18 CBE : Used HAZELTON 18 CBE pump with the following s: • case material • Single stage • impeller • 20" 150# FF suction flange • 17.25" 150# FF discharge flange • CCW Rotation • Weight 8,200 lbs • Dims Applications: Dewatering Pump, Slurry Pump ...more

This Pneumatic Vertical Clamping System s upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly ...more

KAESER SK 20T Rotary Screw Air Center w/Dryer : -- 20 HP TEFC Motor, single-stage, oil injected rotary screw air end with the SIGMA "Profile" screw; high efficiency air & oil cooler with 40-micron package pre-filter, 4-micron air intake filter with replaceable, cleanable cartridge. -- : -- Automatic dual control ...more

DieLink Synergis 114″ x 66″Angle Plates, Pair, Asset #16013, for Each Plate:, Angle Plate Face Dimensions: 96″ x 66″, Rise Plate Face Dimensions: 18″ x 18″, Angle Plate Bottom Depth: 54″, Riser Plate Bottom Depth: 68″, Vertical T-Slot Length: 30″, T-Slot Opening ...more

, - 84" BLOCK DIA. x 60" FACE, - MAX. COIL WEIGHT: 500#, - MAX. STARTING TUBE: 2.20" DIA TO.75" MIN, - RATED PULL: 20,000# FROM 100 TO 625 FPM, TAPERING TO 8330# @ 1500 FPM, - 2 POSITION TRAVERSING DIE BOX, - MAX. DRAW SPEED 1500 FPM, - 400 HP DC WITH SCR DRIVE, - PAYOFF TRAY FOR 84" DIA. COILS, - COIL UPENDER TABLE ...more

Italpresse Model XL/10 38-16 PMBO Hydraulic Hot Press Platen dimensions: 3,800 x 1,600 mm (149 x 63 in.) Number of daylights: 1 Total cylinder stroke: 400 mm (15-3/4 in.) Number of pressing cylinders: 10 Diameter of pressing cylinders: 85mm each Total thrust: 190 metric tons (418,878 lbs) Max. laminating pressure on ...more

one(1) used 12 ton Carver Hydraulic Press 6" x 6" platens. 12 ton Clamping force Tag number 20300-276 Manual Hydraulic Pump - Model no. 3912 with pressure gauge 6" x 6" platens are drilled for heating elements No heating elements included (see photo) Hinged safety door.

Open Power Unit New Oem Surplus Engine Starting At $19,995.00, Variable Speed Mechanical Unit Sae 3 Housing With One Year Parts Warranty. Includes New Cooling Package With, Radiator, Mountings, Air Cleaner, Control Panel, Throttle Cable, Muffler. Add With Optional $2500.00 Pto. Sn# 69341524 180 Hp.

DIAMETER 6700 mm, FLOW RATE 265 M3/h, ADJUSTABLE HEIGHT BAFFLE ATTACHMENT, TURBULENCE REDUCTION BAFFLES, REVOLVING SPIRAL SCOOP, ROTATING CARRIAGE GEAR MOTOR DRIVE COMPLETE(1,1 Kw WITH GEAR REDUCTION), FLOW CONTROL CHANNEL, LEVEL CONTROL ADJUSTMENT HANDWHEEL, RAW DISTRIBUTION WATER, ROTARY JOINT AIR DISSOLVING TUBE ...more

Northtech Model NT-24K-10HC3S 24" Helical Head Single Side Planer 10HP Main Motor Feed Speed: 20-25-30 Solid Cast Iron Constructions Segmented Infeed Roller and Chip Breaker Heavy Duty Jack Lifting Screws Solid Steel Outfeed Roller High Polished Cast Iron Feed Bed with oversized bed roller All Gear Feed System with 3 ...more

NUMBER OF PLATES. 2, WIDTH OF PLATES. 14", HEIGHT OF PLATE. 36", DEPTH OF PLATE. 18", FACE THICKNESS. 2-1/4", ALUMINUM WELDED. YES.

Esco Escomatic NM8-Flexi CNC Multi-Axis Lathe (subject to buyer verification):TurningMax. material diameter 8 mmWork piece length standard 150 mmNumber of tools 4 (2 simultaneously)Max. toolhead speed 8’000 min-1Front machining unit (DUF)Number of powered tools axial 3Max. drilling diameter 6 mmMax. tapping ...more

Z23051C, 7.09" Stroke, 13.73" Shut Height, 3.15" Ram Adjustment Powered, 25.61" X18.52" Ram, 45.5 x 23.5 x 4.75 thick Bed 30 - 60 SPM, Air Clutch, Air Brake, Air Counter Balance, Palm Buttons, Hydraulic Overload, Light Curtains, Wintress Smart pac Control, T - Slotted Ram And Bolter, 52: LR X 75" FB X 126" Tall ...more

ITEM NO : 102600 QTY : 1 ALLOY : S SQ.FT. : 10 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 145 PSI (T) : 145 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 8 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : NB TEMA TYPE : PLATE SHELL NOZZLES : (2)1.5" TUBE NOZZLES : (2)1.5" ...more

Model/Series Eaton Leonard VB 19 ELEC Bender Type - Cold Form Pressure Bender Type - Compression Bender Type - Hand Bender Type - Incremental Bender Type - Ram Bender Type - Roll--Fixed Radius Bender Type - Roll--Variable Radius Bender Type - Rotary Draw--No Mandrel Bender Type - Rotary Draw--Mandrel Capable Bender ...more

Alfa Laval braced plate heat exchanger, stainless steel construction, includes (20) 24-1/2" x 7-1/4" plates, approximately 25 sq. ft. surface area. Model number CB76-20H, Manufacturer number 3287000633, Serial number 19087635. New in 2010. Ports - (4) 2" male NPT fittings. Design Temperature minus 319 degrees ...more