Buy or Sell Your Jointer Planers

Used Netzsch filter press with plate shifter. (69) 800mm polypropylene plates, 2.125" thick. Single eye. Hydraulic closure with hydraulic power pack. Open discharge, NETZSCH 31" X 31".

48" WIDE x.036 STIRLICH HYDRAULIC SHEAR SERIAL #: -Four (4) side high carbon - high chrome shear blades, upper bowtie, lower straight rake blade. -170 Stroke Per Minute - 40 Cuts Per Minute -Shear ram actuated through two (2) heavy duty hydraulic cylinders and rides on replaceable bronze wear plates. -Rack & ...more

WIDTH OF PLATE. 24"", HEIGHT OF PLATE. 24", DEPTH OF BASE. 12", FACE THICKNESS. 3", ALUMIUMN TOP PLATE WIDTH. 32", ALUMIUMN TOP PLATE HEIGHT. 32-1/2", ALUMUNUM TOP PLATE THICKNESS. 1", NUMBER OF DRILL & TAPPED HOLES. 359, HOLE CENTERS. 1-3/4", HOLE DIAMETER. 1/2", MACHINED FACE. YES.

Northtech Model NT-760HCVS 30" Single Side Planer Cutterhead Motor: 25HP 4" Diameter 30" Long Helical Cutterhead 1HP Table Height Adjustment Motor Height Adjustment: 2 Screw 40"x30" Table Area 2HP Feed Motor (2) 3" Segmented Feed Rolls Smooth 3" Outfeed Roll Feed Speed: 0-90FPM Min/Max Product Thickness: 1/4"-8" ...more

GRADE. B, LENGTH OF PLATE. 48", WIDTH OF PLATE. 36", PLATE THICKNESS. 6", HEIGHT ON STAND. 37", COLOR. BLACK, LEDGES ON ENDS. 2".

NUMBER OF PLATES. 2, WIDTH OF PLATE. 8-1/4", HEIGHT OF PLATE.24-1/2", BASE DEPTH. 101/4", MACHINE FACE. YES, CAST IRON. YES.

SERIAL. A51001301, LENGHT OF PLATE. 60", WIDTH OF PLATE. 30", PLATE THICKNESS. 10", FLOOR TO TOP. 37", LEGES ON 4 SIDE. YES, LEDGE DEPTH. 3", COLOR. BLACK.

LENGTH OF PLATE 36", WIDTH OF PLATE. 24", COLOR. BLACK.

, STROKE OF DOWN MOVING PISTON: 12", DISTANCE PISTON RETRACTED TO LOWER PLATEN: 12", LOWER PLATEN SIZE: 24-1/2" LR x 24-1/2" FB x 2-1/4" THICK, LOWER PLATEN ADJUSTMENT: 15" (MANUAL), HYDRAULIC OPERATION, MANUAL RAM TRAVEL, PRESSURE ADJUSTMENT (SELECTIVE), DUAL GAUGES - PUSH BUTTON ON/OFF, (2) PRESSURE GAUGE READOUTS ...more

150/110 TON BLISS (NEW 1981) MODEL #3-3/4-B DOUBLE ACTION TOGGLE PRESS, SERIAL. HP52840, MODEL. 3-3/4 B, YEAR. 1981, SLIDE PLUNGER CAPACITY. 150 TON, BLANKHOLDER CAPACITY. 110 TON, SLIDE PLUNGER STROKE. 20", SLIDE PLUNGER SHUT HEIGHT. 22 to 26", BLANKHOLDER STROKE. 11-1/2", BLANKHOLDER SHUT HEIGHT. 20" to 24" ...more

SERIAL. 777-D, GRADE. AA, LENGTH OF PLATE. 60", WIDTH OF PLATE. 36", PLATE THICKNESS. 12", OVERALL HEIGHT ON STAND., ACCURACY.0002, COLOR. LIGHT GRAY, ROLL AROUND STAND. YES.

GEA plate-type heat exchanger, Model number NT100T BYF-150, includes approximately (16) 316 stainless steel, measuring 34" x 18" plates, frame has additional 24" to accommodate more plates. Set up as 4-eye closed delivery. Rated for 140 PSI at 350 degrees Fahrenheit to 32 degrees Fahrenheit sides A & B. Serial ...more

LENGTH OF PLATE. 144", WIDTH OF PLATE. 48", PLATE THICKNESS. 4-1/2", NUMBER OF T SLOT LENGTH WAY. 11", NUMBER OF T SLOT CROSS. 20.

ITEM NO : 99657 QTY : 1 ALLOY : S SQ.FT. : 15 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 260 TEMP. DEG. F (T) : 260 TUBE HOLES : 27 PLATES V/H : V SHELL NOZZLES : (2) 2" TUBE NOZZLES : (2) 2" WASH ACETONE CHILLER; MFG. BY ALFA LAVAL; MODEL #M6MFG; (27) ...more

LENGTH OF PLATE. 36", WIDTH OF PLATE. 36', PLATE THICKNESS., NUMBER OF T SLOTS. 7.

used- keifel 40 mm blown film line, model ca4, 24:1 l/d. lowboy extruder having an electrically heated, air-cooled barrel. a second complete barrel, screw, and heaters are included to convert the machine to a 30:1 l/d ratio. gearbox is belt driven by a 30 hp reliance d/c motor with scr control. includes hopper, water ...more

Stroke 7.88 inches Powered Ram Adjustment 4.33 inches Shut Height 17.73 inches Strokes Per Minute 20-50 Ram Size 33" x 24" Bed Size 55" x 33" Air Clutch (Yes/No) yes Air Counter Blance Cylinder yes Hydraulic Overloads yes Floor Sanding yes Dual Palm Buttons yes.

ITEM NO : 102595 QTY : 1 ALLOY : S SQ.FT. : 13 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 145 PSI (T) : 145 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 11 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : NB TEMA TYPE : PLATE SHELL NOZZLES : (2)1.5" TUBE NOZZLES : (2)1.5" ...more

Make: Nordberg, Model: 1000 Ton, Year: 1900, Machine Location: Upon Request, Platen Size, Upper 24”x24”, Lower 36”x36”, Stroke, Approximately 18”, Daylight, Approximately 18”, Single Speed.

SENNERSKOV Feed Through Hot PressPlaten dimensions: 75" Wide x 140" long, loading on the 75" side, 11-1/2" single daylight. -- 4" Thick steel platens suitable for heating by steam, hot water or hot oil with a maximum operating temperature of 370 F. -- (9) Upstroke press cylinders, with 40 HP hydraulic system motor. -- ...more

Used 10" Plate Thermoforming Mold 16 Cavity Rope Design Edge 3-Section Divided Plate Inserts Full Plate Inserts Diamond Style and Decorative Edge Inserts Plate Weight 22.5g Divided Plate Weight 22.8g.

HEIGHT OF PLATE. 60, WIDTH OF PLATE. 18", LENGTH OF BASE. 24", THICKNESS OF FACE. 2-1/16, DRILLED & TAPPED HOLES. 3/4", DIAMETERHOLE CENTER ACROSS & VERTICALLY. 3", FACE OF PLATE. MACHINED SURFACE, PLATE CONSTRUCTION. STEEL WELDED.

Biesse "Akron 1440 A" Edgebander, This machine will do PUR pucks or EVA granuals, Min. panel height: 10 mm, Max. panel height: 60 mm, Height of edgebanding material: 14-64 mm, Thickness of edgebanding material in rolls: 0.4-3 mm, Thickness of edgebanding in strips: 0.4-12 mm, Min. panel protrusion from the track: 25 ...more

Northtech Model Nt-1320-50HCVS 52" Single Head Finish Planer Cutterhead 50HP Cutterhead Motor 6" Diameter Helical Cutterhead with 8-row 15x15x2.5 inserts Max Depth of Cut: 5/16" (8mm) Table Table Area: 55"x54" Table Elevation Motor: 2HP Adjustable Bed Rollers DP-525 Automatic Bed Positioning Feed System 4" (100mm) ...more

MODEL S100-354C-14-Y4-D. SERIAL #70-4-020. THREE 18.5" X 18.5" X 2.5" ELECTRICALLY HEATED PLATENS WITH OPTIONAL WATER-COOLING. TWO DAYLIGHTS OF APPROX 7" EACH. APPROX 16.5" DAYLIGHT WITH CENTER PLATEN REMOVED. OPTIONAL RAM SPACER THAT IS APPROX 5" TALL. THAT WOULD REDUCE DAYLIGHT ACCORDINGLY. CLAMP CYLINDER HAS APPROX ...more

Used Allen-Sherman-Hoff Double Roll Clinker Grinder - Size 2'-10", Heavy-duty fabricated frame using 3/4" plate steel, side internal wear liners, Solid intermeshed rollers, Capacity Range: 75-125TPH, Nominal Operating Speed: 16RPM, Product inlet throat is 34" wide and 30" long, Line height of the ...more

GE Dual Pinion AG Ball Mill Electrical Drive System (NEW) Consisting of: (2) 7500 KW/ 10,000 HP, 180 RPM Synchronous Motors (Air Cooled), All Base and Sole Plates, Foundation Bolts, AC Field Panels, Conduit Boxes, Couplings, De Bearings, ODE Bearings, Rotors, Stators and Transformers (In Crates - Never installed).

Caterpillar Model 3512TA Mounted in 2022 into Fully Customized 40’ ISO Sound Attenuated Container on Tandem Axle Chassis, Premium Deep Sea DSE8610 Auto Paralleling Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT Generator, Shunt Trip Circuit Breaker, Camlock Distro, Elec.Governor, Standard Duty ...more

Used 73" BW Papersystems / Marquip Dual Rotary Sheeter, Model: Sheetpro, Model III L Dual rotary knife, Marquip dual 72” unwind with Marquip splicer, Tidland Class III slitting, Web guide, Sheet cleaner, Over lap, Continuous discharge, Manufacturer BW PAPERSYSTEMS / MARQUIP Model SHEETPRO Year 1999 Condition ...more

WITH PLAIN REELS, SINGLE PLANE STRAIGHTENER, STOCK CHECK, CUTOFF, FORM POST STRIPPER, BIJUR AUTO LUBE, 3 HP 3/60/550 VOLT (850 RPM) MOTOR.

Product, Stock Number AM22636 Brand Addison McKee Capacity 3.50 inches, 3.5″ Addison McKee DB-89 CNC Tube Bender, Addison McKee 3-Axis CNC horizontal mandrel tube bending machine recontrolledModel: DB-89Recontrolled in 2023:, Maximum bending capacity: 3-1/2” OD x.220” WT (Mild Steel)Maximum center ...more

WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.: -- (2) 11-1/2" x 62" Cast iron side tables and (1) ...more

WIDTH OF PLATE. 18", HEIGHT OF PLATE. 40", LENGTH OF BASE., FACE THICKNESS., DRILLED & TAPPED HOLES. 151.

Caterpillar Model 3512TA Mounted in 2022 into Fully Customized 40’ ISO Sound Attenuated Container on Tandem Axle Chassis, Premium Deep Sea DSE8610 Auto Paralleling Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT Generator, Shunt Trip Circuit Breaker, Camlock Distro, Elec.Governor, Standard Duty ...more

(1) Used 300 Ton Blow SC2-300-96-48 Straight Side Double Crank Press, Capacity: 300 Ton, Stroke: 10, Adjustment: 8, Shut Height: 23 (Slide Down Adjustment Up over Bolster), Bed Area: 96 lr x 48 fb, Bolster Thickness: 6.5, Speed: 20 - 60 spm, Windows: 32 wide x 22 high, Air Clutch and Brake, Air Counter Balances, Floor ...more

Bell & Gossett ITT GPX plate style heat exchanger. Unit has 8 plates, 10" x 30" for approx. 16 sq. ft. surface area with 2" inlet/outlet. Unit has stainless steel product contact parts, last used in pharmaceutical application. Exchanger is rated for 150 PSI @ 230 deg. F. both sides. Unit is model GPX151 ...more

OVERALL BED SIZE: 31" L TO R X 12" F TO B. DISTANCE BETWEEN POST: 24 \u00bd" L TO R X 5 \u00bc" F TO B. NOMINAL PLATEN SIZE: 24 \u00bd" L TO R X 12" F TO B. TWO 15" X 15" X 4 \u00be" ELECTRIC PLATENS. EACH HAS 4 STRIP HEATERS. DAYLIGHT IS ADJUSTABLE FROM 2 \u00bd" TO 15 \u00be" WITH PLATENS AND 12" TO 25 \u00bc" ...more

ITEM NO : 102566 QTY : 1 ALLOY : S SQ.FT. : 8 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 145 PSI (T) : 145 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 TUBE HOLES : 7 PLATES PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : NB TEMA TYPE : PLATE SHELL NOZZLES : (2)1.5" TUBE NOZZLES : (2)1.5" ...more

TIE ROD FRAME CONSTRUCTION, DOUBLE BACK GEARED, RATED CAPACITY TONNAGE: PLUNGER 150, BLANKHOLDER 110, STROKE: PLUNGER 22", BLANKHOLDER 15", SHUTHEIGHT: PLUNGER 30", BLANKHOLDER 28", ADJUSTMENT OF PLUNGER AND BLANKHOLDER 6", BED AREA 30" X 30", RAM AREA PLUNGER 14" X 11", RAM AREA BLANKHOLDER 24" X 26", BOLSTER AREA ...more

Rebuilt CAT C18 Industrial Power Unit; 2014 Model; 630HP @ 2100RPM; Tier 3 Emissions; Engine Driven Radiator; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Front Facing Exhaust; CAT Control Panel; Rebuild Completed by CAT Dealer w. CAT Parts; In Stock!, Engine: Manufacturer : Caterpillar Model : C18 ...more

LENGTH OF PLATE. 138", WIDTH OF PLATE. 62", PLATE HEIGHT. 6-1/2", NUMBER OF T SLOTS. 5, T SLOT CENTERS. 12", ACESS HOLES IN TOP. 6.

Make: IPG Photonics, Model: YLS-60000, Year: 2014, Machine Location: Upon Request, Laser Rated Power: 60,000 W, Laser Actual Power: 59,000 W, Laser Wavelength: 1070 nm, Laser Output Characteristics: CW & Pulsed, Laser Cooling: Water, System Controller & Software: LaserNet, System Power: 480VAC 3PH, Small ...more

SACC TRANFER COOLER; MFG. BY A.P.V. IN 2009; MODEL #VEGA017-M-12; MAX FRAME CAPACITY 39 PLATES; GASKET TYPE - EPDM (CLIP TYPE);.6MM PLATE THICKNESS;.

Used ZED Shuttle Sealer, Model EZB, style 0321A002D, 10X10 platen size, 110 volt, serial# 311M3773.

15.2 SF Plate Heat Exchanger, Superchanger, stainless steel, 26 Plate. Superchanger plate heat exchanger. Unit has 26 plates, 8" x 18-1/2" for approximately 15.20 square feet surface area with 2" inlet/outlet. Unit has stainless steel product contact parts, rated for 150 PSI at 300 degrees Fahrenheit, model ...more

US BAIRD #3-24 WIRE FORMING FOURSLIDE, MAX WIRE DIAM. : 3/16, WIRE FEED 24", FORM LIFTER, STRIPPER, VARIABLE SPEED MOTOR, MECH. CLUTCH, SPLIT CAMS, DOUBLE GIBBING, H-HEAD, 2 PLANE STRAIGHTENER.

Process Systems Inc. rotating coil holoflite, horizontal hot break tank. T735563ank size is 22" wide x 4' long x 3' deep, approximately 11 cubic feet, 304 stainless steel unit has rotary joints on both ends. Unit is 1.5 HP, 230/460V, 660 RPM to torque reducer, 46.32:1 ratio, on stainless steel frame, New in ...more

Alfa Laval braced plate heat exchanger, stainless steel construction, includes (20) 24-1/2" x 7-1/4" plates, approximately 25 sq. ft. surface area. Model number CB76-20H, Manufacturer number 3287000633, Serial number 19087635. New in 2010. Ports - (4) 2" male NPT fittings. Design Temperature minus 319 degrees ...more