Buy or Sell Your Jointer Planers
AI-ranked results for jointer planer - closest matches first
Johnson Controls LP-DIS65P00-0C FX15 Large User Interface Display Panel
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Johnson Controls
Johnson Controls LP-DIS65P00-0C FX15 Large User Interface Display Panel - Johnson Controls LP-DIS65P00-0C FX15 Large User Interface, panel, flush mount or hand held, 4x20 backlit LCD, IP54, extended temperature range: -20 C to +50 C, standard JCI front-plate. The front-plate is fully customisable upon minimum order ...more
JUST ADDED!
5' x 8' Weldsale, welding table platen acorn type, weling stand, 5 clamps
Generation Machine Tools | Sarasota, FL
Category: Welding Table
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Weldsale
WELDSALE 5’ x 8’ Welding Table Platen Acorn Type USA #8268, WELDSALE 5’ x 8’ Welding Table Platen Acorn Type USA #8268, Reference #8268, Model # 5’ x 8’, Platen size- 60” x 96” x 5-1/2” thick, Working height- 28”, Welding stand, (5) Clamps, Machine weight- ...more
1200 KW Caterpillar #3512B Land Drill Module, Diesel Generator Set, 600 Volts 50 Hz.
Integrated Energy Networks Llc | Dade City, FL
Category: 50 Hz Diesel Generators
Seller: Integrated Energy Networks Llc
Location: Dade City, FL
Mfr: Caterpillar
Model: 3512B
Year: 2015
CAT 3512B Land Drill Module, 1714 kVA (1200 kW), 600v. 50 Hz. Diesel Generator Set, Open Skids, SURPLUS, NEVER USED OR INSTALLED with the following configuration:, Heavy Duty Air Cleaner, Fuel Filter & Prime Pump, Simplex Oil Filter, Charging Alternator, Electric Starter, Jacket Water Heater, EMCP Panel, Generator ...more
U.S. Baird #3, Four Slide Wire Forming Machine, 3/16" wire diameter, 1-1/8" ribbon, 10" feed, 120 RPM, mechanical clutch, 2 plane straightener
National Machinery Exchange | Newark, NJ
Category: Wire Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: U.S. Baird
Model: -3
CAPACITY: 3/16" BASIC WIRE, 1-1/8" RIBBON METAL, FEED LENGTH: 10", OPER. SPEED: 120 RPM, MECH. CLUTCH, 14 ROLL 2 PLANE STRAIGHTENER, MOTOR DRIVE: 3 HP, 230/460/60/3, w/CONTROLS, V.S. DRIVE, OVERALL SIZE: 68" LR x 60" FB x 48" H, WEIGHT: 2300#.
#ZLTech-170G3, 6000 watt tube laser, 6" diameter, 8' feed, Fuscut 5000B, Boci 421TS Laser Head, 2024
Revelation Machinery | Chicago, IL
Category: CNC Lasers
Seller: Revelation Machinery
Location: Chicago, IL
Model: ZLTECH-170G3
Year: 2024
Make: ZLTECH, Model: 170G3, Year: 2024, Machine Location: Upon Request, 6” Diameter, 8’ Long Feed, 6.000W Laser, Fuscut 5000B Software, Boci 421TS Laser Head, Schneider Electronics, Yaskawa Servo, Controllers, and Servos.
100 KVA United, spot welder
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: United
Input Power 440 Voltz Throat 12 inches Platen Size / Type 13" x 6" lower 9" x *" Upper Ram Secondary Volts High / Low 10.50 / 5.25 Control Voltage 120 CNC Control no Type of CNC Control Unitrol Solutions Dimensions 35" LR x 55" FB x 8'Tall Weight 3500 pounds Palm Buttons yes Foot Pedal no.
1200 sq.ft., APV / SPX, VEGA-028 R-16, Stainless Steel plate and frame heat exchanger, 150 psi, 302 plates
Frain Industries | Carol Stream, IL
Category: Plate and Frame Heat Exchangers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Spx
APV, Model VEGA-028 R-16, stainless steel, plate and frame heat exchanger with approx 1200 total ft² heat transfer area with a flow rate of 50 to 250 gallons per minute – depending on materials and application. (302) plates 48" in Length; 12" in Width; in (3) zones, (132) plates front zone. (132) ...more
1000 HP Ariel #RG357M, screw compressor, 1-stage, 1400 RPM, Caterpillar 3516 NG engine, Allen Bradley Panel View 702, 2011
IronHub | Calgary, AB
Category: Gas Screw Compressors
Seller: IronHub
Location: Slave Lake, AB
Mfr: Ariel
Model: RG357M
Year: 2011
Available for sale is a lightly used 5 Ton Crane, model RG357M, built in 2011. This crane s gas detection, beacons, and an exhaust fan. It operates on natural gas with a maximum horsepower of 1000 and has a rated RPM of 1400. The compressor type is screw from Ariel, with a control panel type of Panel View 701. The ...more
1534 sq.ft., Krones, Thermowave TL 500 FBXV, plate heat exchanger, 307 plates, 2008
Aaron Equipment Co | Schaumburg, IL
Category: Plate and Frame Heat Exchangers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Krones
Year: 2008
used- krones thermowave plate heat exchanger, approximate 1,534 square feet, type tl 500 fbxv. (10) chambers each rated 10 bar (145 psi) at 100 degrees c. (212 f.). (307) 254 smo high-alloy austenitic stainless steel plates approximate 18" wide x 60" tall. includes (2) spacers, (20) 3-1/4" inlets/outlets. mounted on ...more
18" Shriver #M470FB, Filter Press, recessed plate, 1/2" recess, (3) plates, 225 psi filtering pressure, 4000 psi oil pressure, 39 tons max thrust, 1997
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Filter Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Shriver
Model: M470FB
Year: 1997
Filter press, Shriver/Eimco, recessed plate, 18" X 18" recessed plates, polypropylene plates with approximately 1/2" recess, includes (3) plates with one having dual sided recess, Model M470FB serial number 41962-01-AR rated for maximum filtering pressure of 225 PSI, max thrust 39 tons, max oil pressure 4000 PSI. ...more
Bodor #1500-Pro, Fiber laser welder, 1500 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: 1500-PRO
FIBER LASER CUTTING MACHINE: Trade Term DDP Freight & Tariff Ship with Bodor Machine Installation & Training Cost Not Included Transportation By Sea Loading Container 1 set, wooden box, ≤24 sets20GP×1, ≤72 sets40HQ×1 Payment Terms 100% before the Order Warranty 18 months limited warranty for ...more
200 Ton, Beatty #20060N, hydraulic bulldozer type horizontal press, 15" stroke, 75 HP
National Machinery Exchange | Newark, NJ
Category: Horizontal Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Beatty
Model: 20060N
200 TON BEATTY HYDRAULIC BULLDOZER TYPE HORIZONTAL PRESS, MODEL. 20060N, TONNAGE CAPACITY. 200 TON, STROKE. 15", CYLINDER DIAMETER. 12", PRESS PLATEN SIZE. 61" WIDE X 14-1/2" HIGH, PRESS PLATEN WIDTH. 18", PLATEN T-SLOTTED. YES, 3 T-SLOTS, BED SIZE. 60" F-B X 77" L-R, RESISTANCE PIN. 10" DIAMETER, FLOOR TO BED. 30" ...more
Mectron #LT250, Laser Inspection & Sorting Machine, 300 PPM, 3-32 mm diameter range, 7.87" max. length, (2) lasers & camera, (2) vibratory feeders, X-Y laser scan, 2012
Hariton Machinery Co Inc | Bridgeport, CT
Category: Inspection Equipment
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Mectron
Model: LT250
Year: 2012
Diameter 3 - 32mm Length 200mm Max., 2 Lasers & Camera for checking recess and cracks on top of head, 2 Vibratory Feeders available with this machine, s:, X-Y Laser Scan, Vision System with Camera option, Camera is setup to check top of the head for recess and cracks /bursts, etc., Production Capability:, Checks ...more
SpiroFlow #Spirofil, bulk bag filling line w/controls, 3000# bags, 48-72" all, 316 Stainless Steel, food svc, 20 BPH, Toledo scales, pallet dispenser, slip sheet placer, power roller
Plantex Equipment Co | Alvin, TX
Category: Bagging Equipment
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Spiroflow
Model: SPIROFIL
Year: 2014
8-1/2" x 18-1/2" x 2-1/2" thick Filter Press, 14 each
A M King Industries | Oroville, CA
Category: Plate and Frame Filter Presses
Seller: A M King Industries
Location: Oroville, CA
Filter Press with 14 each 18-1/2" x 18-1/2" x 2-1/2" thick Plates.
31.5" Simex GMBH #SPK80-45/50, hydraulic filter press, (48) 800mm x 800mm plates, 2017
Mohawk Machinery Inc | Cincinnati, OH
Category: Plate and Frame Filter Presses
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Simex
Model: SPK80-45/50
Year: 2017
800MM (31.5) SPK 80 SIMEX GMBH 45/50 FILTER PRESS - 48 Plates - Hydraulics - 2017, 800MM (31.5) SPK80 SIMEX GMBH 45/50 HYDRAULIC FILTER PRESS, New 2017, Serial No 80977, Type SPK 80, Model 45/50, (48) 800MM x 800 MM Plates, Hydraulic System, Control Cabinet, CATALOG :, Plate Dimensions, L x W 800MM x 800MM, Plate ...more
Arpac #PC2000, automatic, intermittent motion, 5-axis servo driven, wrap-around case or tray packer rated up to 20 cases per minute
Frain Industries | Carol Stream, IL
Category: Case Packer Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Arpac
Model: PC2000
Arpac Model PC2000, Automatic, intermittent motion, 5-axis servo driven, wrap-around case or tray packer rated up to 20 cases per minute with number of product – depending on materials and application. Case size range: 3.2" to 15.3" in Length x 7.7 to 23.2" in Width x 4.7" to 14.7" in ...more
SJMC #MG1000, block grinding & milling machine, automatic downfeed CNC touch screen
MachTrade | Las Vegas, NV
Seller: MachTrade
Location: Las Vegas, NV
Mfr: Sjmc
Model: MG1000
Automatic Downfeed CNC Touch Screen Milling Machine Model: MG-1000, It is Mech-Electrical highly integrated machine uses touch key and screen display. The milling plate longitudinal movement by servo motor, the spindle vertical movement and rotation controlled by servo motor, three axis linkage control, high ...more
Cherry Burrell #655SB-4, Stainless Steel thermaflex plate heat exchanger
JM Industrial LLC | Millwood, WV
Category: Plate and Frame Heat Exchangers
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Cherry Burrell
Used Cherry-Burrell Stainless Steel Thermaflex Plate Heat Exchanger 1,632 Sq/Ft, Model 655SB-4., Serial No. 2291, Total Surface Area: 1,632 sq/ft (816sq/ft left-hand, 816sq/ft right-hand), The welded frame measures 33" wide X 92" long at it's base, 73" tall, The plate stack measures approximately ...more
6" x 6" x 1/2" Hill-Acme #6A, hydraulic ironworker, 105 ton, 24" throat, 15 HP, foot pedal
Yoder Machinery Sales | Holland, OH
Category: Ironworkers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hill-Acme
Model: 6A
SERIAL. 856A0.901541056, MODEL. 6A, PUNCHING CAPACITY. 105 TONS, PUNCHING SIZE. 1-1/4" THROUGH 1" THICK, DEPTH OF THROAT. 24", ANGLE SHEARING. 6" X 6" X 1/2", ANGLE SHEARING, 45 DEGREE. 5" X 5" X 1/2", PLATE. 1/2" X 21";3/4" X 10-1/2";1" X 8", ROUNDS. 2-1/4", SQUARES. 2", COPING CAPACITY, SQUARE. 2-1/2" X 3-1/2" X ...more
Fronius #FPA-3020, AC/DC orbital welding system
Machinery Resources Intl | Simi Valley, CA
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Model: FRONIUS #FPA-3020
Fronius FPA 3020 used welder available. Ideal for diverse welding needs, this unit by a trusted manufacturer offers reliable performance. Don't miss out on this opportunity to enhance your welding operations with quality equipment., CONTROL DISPLAY OF WELDING CURRENT, ROTATION AXIS, FORMING GAS, AND EXTERNAL ...more
Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Keyence
Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type - Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type, Laser Class 2 - Keyence - Keyence Corporation - LR-TB5000 - LR-TB5000.
Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Keyence
Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type - Keyence LR-TB5000 All-Purpose Laser Sensor, Detection Distance 5 m, Cable Type, Laser Class 2 - Keyence - Keyence Corporation - LR-TB5000 - LR-TB5000.
50 Ton, Denison #NA50C92D13A112-P20, hydraulic C-frame press, 19" x30" bed, 30 HP, #73202
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Denison
Model: NA50C92D13A112 P20
SERIAL. 291-3027437A, MODEL. NA50C92D13A112 P20, CAPACITY. 50 TON, AREA OF BED. 19" X 30", SLOT IN BED. 9" X 12", AREA OF BED & RAM PLATES. 32" X 25" X 2", CYLINDER DIAMETER. 4", DUAL HAND LEVER. YES, RAM NOSE TO BED. 20", STROKE. 15", DIE SET PLATE TOP. 1-3/4", DIE SET PLATE BOTTOM. 2", MOTOR. 30 HORSEPOWER.
150 Ton, Steton #P150C, Hydraulic Cold Press, 118" x 51" aluminum platen, 17" daylight opening, (8) 3.35" cylinders, 2 HP pump, 575 V., 3PH
Ex-Factory | Charlotte, NC
Category: Hydraulic Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Steton
Model: P 150/C
STETON - P150C: (2) Platen Cold Press (was built as a Hot Press, but heating does not work!) -- Approx.: 118" x 51" (3,500 x 1,300 mm) Overall platen size; side loading on: 118" Side; pressure from bottom: 2 HP Hydraulic pump. -- Max. daylight opening: 450 mm (17") Less thickness of middle platen. - Total pressure: ...more
93 sq.ft., Alfa-Laval, plate heat exchanger, (58) 316 Stainless Steel plates, 4.64 gallon capacity, type M6FC, 1995
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 1995
ITEM NO : 99809 QTY : 1 ALLOY : S SQ.FT. : 93 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 TEMP. DEG. F (S) : 200 TUBE HOLES : 58 PLATES V/H : V SHELL NOZZLES : (2)2" TUBE NOZZLES : (2)2" SHELL DIAMETER FT'IN" : 6" PROCESS CHILLED WATER; MFG. BY ALFA LAVAL IN 1995; 93.6 SQ. ...more
Seitz #Orion-100/200, Filter Press, Stainless Steel, Filtration Surface, 3962.5 GPH, 516.7 sq.ft., 26 plates, 39" x 39" plates, on legs
Aaron Equipment Co | Schaumburg, IL
Category: Plate and Frame Filter Presses
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Seitz
Model: ORION-100/200
used seitz orion 100/200 stainless steel filter press 48 m filtration surface, brewery application. with a 150 hl/hour (3962.5 us gallon/hour). currently fitted with 24 chambers & 2 end plates 1000 x 1000 mm (39" x 39"). current filtration surface is 48 m2 (516.66 sq. ft.). hydraulic operated. on 4 legs. includes: ...more
6" x 6" x .5" Sunrise #IW-110SD, with hydraulic plate & hydraulic angle shear hold downs, 110 ton, new
JPS International Inc | Lake Forest, CA
Category: Ironworkers
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Sunrise
Model: IW-110SD
EquipmentIronworkersSunrise IW-110SD w/ Hydraulic Plate & Hydraulic Angle Shear Hold DownsSunrise IW-110SD w/ Hydraulic Plate & Hydraulic Angle Shear Hold DownsHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionNewQuantity1 availableRequest QuoteLoading.NewHave one to sell?Sell ...more
8.3" Haas #HRT210-2, 4-Axis dual platter rotary table, 90:1 gear ratio
MD Equipment Services LLC | Crooked River, OR
Category: Rotary Tables
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Haas
Model: HRT210-2
4th-Axis Dual-Platter Rotary Table, OEM: Haas Automation, Inc., Model No.: HRT 210-2, Serial No.: 701321 (A,B), Version: P3, s and (based on listed OEM ):,.Platter diameter: 8.3",.Max Weight on Platter,.With Support: 120 lbs.,.Unsupported: 60 lbs.,.Spindle,.Speed: 60 Degrees/Second,.Torque: 170 ft-lbf,.Runout Max: ...more
54 sq.ft., Alfa-Laval, M10-BFG, plate heat exchanger, 150 psi, 300°F, Carbon Steel frame, 316 Stainless Steel plate, 2015
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2015
ITEM NO : 113355 QTY : 1 ALLOY : S SQ.FT. : 54 MATERIAL (S) : CS FRAME MATERIAL (T) : 316SS PLATES PSI (S) : 150 PSI (T) : 150 TEMP. DEG. F (S) : 300 TEMP. DEG. F (T) : 300 PASSES (S) : 1 PASSES (T) : 1 V/H : V CODE : YES Used 54 sq. ft. Vertical Plate Exchanger, Mfg by Alfa Laval in 2015.50MM Plate Thickness, Model ...more
JUST ADDED!
12 Ton, Famco #5, floor model ratchet type arbor press, 16" stroke, 13 -1/2" throat, 150:1 leverage
Yoder Machinery Sales | Holland, OH
Category: Arbor Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Famco
Model: 5
MODEL. #5CAPACITY. 12 TONSTROKE. 16"DEPTH OF THROAT. 13-1/2"DAYLIGHT OVER PLATE. 18" MINIMUM TO 30" MAXIMUMDAYLIGHT OVER TABLE. 19-1/2" TO 31-1/2" MAXIMUMSLOT IN PLATE. 4-1/8"LEVERAGE. 150 TO 1.
Trumpf #TruLaser-Weld-5000, robotic laser weld cell, 80-3000 watt, 47" x102" working area, 2018
Equipment Hub | Decatur, GA
Category: CNC Lasers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Trumpf
Model: TRULASER-WELD-5000
Year: 2018
Stock #: 121240035, Location: Southeast, Brand: Trumpf, Model: TruLaser Weld 5000, Year: 2018, Loading Fee: Rigging Required, Working Area: 47" x 102", Part Weight Capacity: 1,653 Lbs., Laser Output Range: 80W-3000W, Wavelength: 1030 NM, Minimum Laser Light Cable Diameter: 100 UM, TruDisk 3001 Laser System ...more
41" x 94" Larox #PF-15 Series, concentrate filter press, unused, 2017
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Filter Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Larox
Model: PF-15
Year: 2017
UNUSED Metso Outotec Larox Model PF 15 Series Filter Press. This PF 30/35 M15 1 60 model, offers a filtration area of 30m, with 12 filter plates and a chamber volume of 1.8m. The filter plates measure 1050mm x 2400mm, while the cloth dimensions are 1210mm wide and 50m long. Designed for 575V, 60Hz electrical systems ...more
600 liter Collette #Gral-600, High Shear Mixer, non-jacketed bowl, 50 HP, 1990
Aaron Equipment Co | Schaumburg, IL
Category: High Intensity Mixers and Blenders
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Collette
Year: 1990
used- 600 liter collette high shear mixer, model gral 600, stainless steel product contact surfaces, 600 liter capacity, non jacketed mixing bowl with pneumatic plug valve discharge, approximately 50 hp main mixing blade, with chopper, hydraulic bowl lift with pump, hmi panel and control panel, built 1990.
192" x 62" x 6", lake shore t-slotted floor, Cast Iron construction, #73844
Yoder Machinery Sales | Holland, OH
Category: Floor Plates and Bed Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: LAKE SHORE T-SLOTTED FLOOR
LENGTH OF PLATE. 192" (16'6"), WIDTH OF PLATE. 62", THICKNESS OF PLATE. 6, NUMBER OF T SLOTS LENGTH DIRECTION. 5, LENGTH OF T SLOTS. 192", DEPTH OF T SLOTS. 2", WIDTH OF T SLOTS AT TOP. 1", WIDTH OF T SLOTS AT BOTTOM. 2", CENTER DISTANCE BETWEEN T SLOTS. 11", CAST IRON CONSTRUCTION. YES, TIE DOWN HOLES. 8 ...more
Cantek #MX-340M, Edgebander, 0.472" - 1.77" panel thickness, 23 FPM, 2016
Revelation Machinery | Chicago, IL
Category: Woodworking Edgebanders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cantek
Model: MX-340M
Year: 2016
Make: Cantek, Model: MX340M, Year: 2016, Machine Location: Georgia, Feeding Speed: 23 FPM, Panel Thickness: 0.472 inch ~ 1.77 inches, Edge Thickness: 0.0158 inch ~ 0.118 inch, Minimum Panel Width: 3 ½ inches, Minimum Panel Length: 3 ½ inches, Working Table Height: 33.5 inches, Dust Collection Outlet ...more
No. 790HS Sleeper & Hartley, Spring Coiling System, .042" wire, 28.5" feed, 700 SPM, 1" coil diameter, double dia & pitch
National Machinery Exchange | Newark, NJ
Category: Wire Spring Coilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sleeper & Hartley
Model: 790HS
Wire Range:.015" to.042", Max. Wire Feed: 28.5", Max. Coil Diameter: 1", Production: Up to 700 spm, Floor Space: 23" x 37", Net Weight: 900 lbs., Drive: Allen Bradley Variable Frequency Drive, Feed Rolls, Wire Guides, Chuck, Double Diameter, Double Pitch, Quickset Control Adjustments, One Set of 2 Feed Gears, Allen ...more
Carlton, 30 x 24 x 24, universal drill table, 90° table tilt
Yoder Machinery Sales | Holland, OH
Category: Drill & Mill Box Tables
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: CARLTON
LENGTH OF PLATE. 30"WIDTH OF PLATE. 24"HEIGHT OF PLATE. 24"AREA OF MACHINED SIDE SURFACE. 24" X 18"NUMBER OF T SLOTS ON TOP SURFACE. 4NUMBER OF T SLOTS ON SIDE SURFACE. 3CENTER DISTANCE BETWEEN SLOTS. 6"WIDTH OF T SLOT. 3/4"DEPTH OF T SLOT. 1-3/8"WIDTH OF T SLOT AT BOTTOM. 1-1/2"TABLE TILTS. 90 DEGREE.
80 KVA Heron #DN-50, projection / spot welder, 12"/18" throat, 6" cylinder diameter, 440/460/480 V.
T J Snow Co Inc | Chattanooga, TN
Seller: T J Snow Co Inc
Location: Chattanooga, TN
Mfr: Heron
Model: DN-50
Machine, Stock Number: 6907, Name: Heron Projection/Spot, 80 KVA, Transformer: 80 KVA, Manufacturer: Heron, Mfg. Model Number DN-50, Voltage: 440/460/480 Volts, Single Phase, Throat Depth: 12/18" in, Serial Number: M10031000200400-01-01, Air Type: Standard Dual Acting, Cylinder Diameter: 6 in, Max Force: 2260 ...more
Collette #GRAL 600, 600 liter, high shear mixer, #2748-82
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Collette
Model: GRAL-600
Used 600 liter Collette high shear mixer, model Gral 600, stainless steel product contact surfaces, 600 liter capacity, non jacketed mixing bowl with pneumatic plug valve discharge, approximately 50 hp main mixing blade, with chopper, hydraulic bowl lift with pump, HMI panel and control panel.
Diehl #75, Straight Line Rip Saw, 4-speeds
Carolina Machinery Sales | Monroe, NC
Category: Straight Line Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Diehl
Model: 75
Diehl Model 75 Straight Line Rip Saw, Chain is in good shape. Left and right chains are worn evenly., Includes: Laser, Variable Speed: 4-speeds.
Crepaco #3DD2, 3-Piston Homogenizer, (3) 2-1/4" diameter Plungers, 1.5" diameter Inlet/outlet, 7.5 HP, 1750/350 RPM, 220/440 V
Machinery & Equipment Co | Brisbane, CA
Category: Homogenizers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Crepaco
Model: 3DD2
Creamery Package Stainless Steel 3-Piston Homogenizer, Model 3DD2. Includes (3) 2-1/4" diameter plungers, 1-1/2" diameter inlet & outlet. Driven by 7-1/2 HP, 220/440 V, 3-phase, 60 Hz, 1750 RPM motor, pulley ratio 5:1, final output 350 RPM. Serial number 2556., HP: 7.5, Basis: FOB, Inlet and Outlet: 1.5" diameter ...more
Math-Ex #Bag-Turner, Bag Turner w/Conveyor, 5' L x 24" width top belting, 1 HP, 90 FPM, 30" turn plate, 2026, new
Ex-Factory | Charlotte, NC
Category: Bagging Equipment for Woodworking
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Math-Ex
Model: BAG-TURNER
Year: 2026
MATH-EX BAG TURNER WITH CONVEYOR: -- Bag Turner/Knockdown Conveyor -- 5' Long x 24" Wide Smooth Top Belting -- Includes Turn Wheel -- 30" Stainless Steel Turn Plate and Adjustable Knockdown Bar -- 1/2 HP Motor at 90 FPMLoaded on your truck.
100 Ton, Niagara #SA2-100-48-30, straight side double crank press, 6" stroke, 22-1/2" Shut Height, air clutch, 40-120 SPM, #74110
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Niagara
Model: SA2-100-48-30
SERIAL. 42791, MODEL. SA2-100-48-30, CAPACITY. 100 TON, BED SIZE. 48" X 24", RAM SIZE. 48" X 30", STROKE. 6", SHUT HEIGHT. 22-1/2", POWER RAM ADJUSTMENT. 3", STROKE PER MINUTE. 40 TON 120, FLOOR STANDING. YES, T SLOTS IN RAM. YES, KNOCK OUT IN RAM. YES, AIR CLUTCH. YES, AIR BRAKE. YES, AIR COUNTER BALANCE. YES ...more
JUST ADDED!
34" x 34" SinoFilter #XMZ50/870, Plate Filter Press, 50 m2, 38 plates, stainless
Savona Equipment | Savona, BC
Category: Plate and Frame Filter Presses
Seller: Savona Equipment
Location: Savona, BC
Model: XMZ50/870
SinoFilter XMZ50/870 Plate Filter Press, Quantity: 4 Units Available1 Unit Remaining - Painted Unit, Make: SinoFilterModel: XMZ50/870Type: Filter Press Style: Plate FilterCondition: Unused SurplusConstruction: (3) Units Stainless Steel, (1) Unit PaintedFilter Area: 50m² (538ft²)Plate Size: 870mm x 870mm ...more
Markforged #X7, 3D Printer, CFR Process, 330 x 270 x 200 mm Build Volume, 50-250 um Z-Layer Resolution, 100/240 V, 2021
Revelation Machinery | Chicago, IL
Category: 3-Dimensional (3-D Printing) Printers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Markforged
Model: X7
Year: 2021
Make: Markforged, Model: X7, Year: 2021, Machine Location: Upon Request, -Printing Process: Continuous Fiber Reinforcement (CFR), -Build Volume: 330mm x 270mm x 200mm, -Z Layer Resolution: 50 m to 250 m, -Print Media: Composite base filaments (e.g., Onyx, Nylon, PLA, TPU) and continuous fibers (e.g., Carbon Fiber ...more
Excel #EX60, Horizontal Baler, 9" Cylinder, 40" x 55" feed opening, 20 HP
Ex-Factory | Charlotte, NC
Category: Horizontal Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Excel
Model: EX60
Year: 1996
EXCEL - EX60: (Non-Ferrous) Horizontal Closed Door Baler with Infeed ConveyorPlaten force: ~124,400 lbsHydraulic pressure: 2500–3000 PSICycle time: ~40 secondsCylinders: (2) × 6" bore hydraulic cylinders.
Keyence #KV-D20 Super-Small Programmable Logic Controller PLC, Operator Panel
Ready Go MRO | Phoenix, AZ
Category: Electrical MRO Components & Parts
Seller: Ready Go MRO
Location: Phoenix, AZ
Mfr: Keyence
Model: KV-D20
Keyence KV-D20 is a compact PLC with an integrated operator panel, designed for small-scale automation and machine control. Featuring real-time monitoring and programming capabilities, this unit supports up to 20 I/O points, making it ideal for compact machinery, small conveyor systems, and automated testing ...more
1/4" Boldrini #RIB0-13-HY, Hydraulic Flanging & Dishing Machine, 21"-157" diameter plate, 11.8" knuckle radius, digital read out, powered bottom plate, operator station, 1983
Southern Fabricating Mchy Sales | Lithia, FL
Category: Flangers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Boldrini
Model: RIB0-13-HY
Year: 1983
½” X 157” Ø Dishing & Flanging Machine with Digital Readout for Roll Position, Powered Bottom Plate Carrier and Operator Station Controls., Mild Steel Capacity: ½”, Stainless Steel Capacity: ¼”, Min. Plate Diameter: 21”, Max. Plate Diameter: 157” ...more
20-1/2" x 63" x 24" Custom slotted angle plates, cast iron, (1) set, #75783
Yoder Machinery Sales | Holland, OH
Category: Angle Plates
Seller: Yoder Machinery Sales
Location: Holland, OH
WIDTH OF PLATE. 20-1/2", HEIGHT OF PLATE. 63", LENGTH OF BASE. 24", FACE THICKNESS. 1-3/4", SLOTS IN FACE. 15", SLOT CENTERS. 8" ACROSS, SLOT WIDTH. 3/4", SLOT HEIGHT. 6", CASTIORN. YES.
60 Ton, Bruderer #BSTA60IIHL, high speed stamping press, 5/8" to 2-1/2" stroke, 2.5" ram adjustment, 1995
Perfection Global | Elk Grove Village, IL
Category: High Speed and Automatic Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bruderer
Model: BSTA60IIHL
Year: 1995
Tonnage Capacity: 60 TonAdjustable Stroke: 0.625" - 2.5" (7 Positions)Stroke Speed: 100 - 1120 SPMRam Adjustment: 2.5"Shut Height (w/ 0.625" Stroke Length): 13” - 15.6”Shut Height (w/ 2" Stroke Length): 12.3” - 14.9”Lower Clamping Plate (R-L x F-B): 37" x 25.6"Upper Clamping Plate (R-L x F-B): ...more
Brandt #FP-10, corner rounding unit, 1995
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Brandt
Model: FP-10
Year: 1995
BRANDT - FP 10: Corner Rounding Unit -- Freestanding unit for: Profiling, shaping, chamfering, or rounding most common type & shape of corner/edge on an edgebanded panel. -- Capacity: 55 mm (2-1/8") Max. panel thickness; 90 x 140 mm min. panel size; 3 mm max. edge thickness (depending on radius & edge ...more
Forward/reverse/jog, Miller Weldmaster #FX25, start, E-stop, 1 HP, 208-230/460 V.
Icon Industries, Inc | Grand Rapids, MI
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Miller
Model: FORWARD/REVERSE/JOG
MODEL FX25. SERIAL #497-393. FORWARD/REVERSE/JOG; START; E-STOP. 1 HP MOTOR (208-230/460V). WIRED FOR 230 VOLT 3 PHASE. SQUARE D ALTIVAR 18 (ATV18U09M2) VARIABLE SPEED AC DRIVE. WELDMASTER TEMP CONTROLLER. WILKESON DIAL AIR REGULATOR R21 LOW PRESSURE: 0-43 PSI. APPROX OVERALL DIMENSIONS: 43" X 24" X 60" TALL. PANEL: ...more
600 Ton, Blow #SD-600-96-48, 16" stroke, 10" adjustment, 36" Shut Height, vari-speed, #7210
Presses for Industry | Detroit, MI
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Blow
Model: SD-600-96-48
PRELIMINARY, BLOW STRAIGHT SIDE DOUBLE CRANK PRESS, MODEL SC2-600-96-48, S/N SDG-600-231-85, 600 TON CAPACITY, 16" STROKE, 10" ADJUSTMENT, 36" SHUT HEIGHT (over Bolster), 96" LR X 48" FB BED AREA, 96" LR X 48" FB SLIDE AREA, 16" W X 30" H WINDOWS, 14-28 SPM VARI SPEED, PRESS CONTROL CONSOLE, OPERATOR PALM BUTTON ...more
45 Ton, V & O, OBI Power Press, air clutch, adjustable, 1.75" Stroke, 9" Shut height, 36" x 21" x 2.5" Bolster, 36" L-R x 21" F-B Bed area, 3" Slide adjust, 300 RPM
MachineCo | Montreal, QC
Seller: MachineCo
Location: Montreal, QC
Mfr: V&o
Note: Without Motor, We have one with motor for $11,500 (click here to view), “Normar wear from use, great condition!”, V&O 45 Ton, OBI Power Press, Air Clutch, adjustable, long slide, great condition! *, Capacity………… 45 tons rated by Mfr.Shut Height……… ...more
Fellows #36-6, gear shaper, 6" stroke, 4" spindle, 2" riser, 37" table plate, s/n #29360
Piselli Enterprises | Statesville, NC
Category: Gear Shapers
Seller: Piselli Enterprises
Location: Statesville, NC
Mfr: Fellows
Model: 36-6
fellows model 36-6 gear shaper 6" stroke, 4" spindle diam., 2" riser assembly, 37" table plate, good condition after going through our shop..
Bescutter #HyRobot, 3D Robot Fiber Laser Metal Cutter, 1500-2000 watt, Fanuc M-20iA, Raytools head, IPG resonator, new
Allstate Machinery | Cornelius, NC
Category: CNC Lasers
Seller: Allstate Machinery
Location: Cornelius, NC
Mfr: Bescutter
Model: HYROBOT
Gantry structure, welded frame.High precision industrial robot: options of Swiss Staubli, Japan FANUC, Japan YASKAWA ect, mature robot control system, high accuracy, stability and reliability.IPG laser resonator 1.5KW~2KW.Raytools laser cutting head, PRECITEC head is optional.Safety protection: safety interlock ...more
JUST ADDED!
6" x 6" x 1/2" Uni-Hydro #120-24, 95 ton, 12" throat, 2" bore, 24" blade, 7.5 HP
Bud's Machine Tools | Murray, UT
Category: Ironworkers
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Uni-Hydro
Model: 120-24
Overview, Type:IronworkersManufacturer:UNI-HYDROModel:120-24Status:For SaleSerial #:3P12075xCountry:United States, • Brand:Uni-Hydro, • Model:120-24, • Serial #:3P12075x, • Approx. Shipping Weight:7,500 Lbs., • Approx. Shipping Dimensions:10' L x 4' W x 8' H, • Skidding ...more
377 sq.ft., Alfa-Laval, plate exchanger, 150/FV psig @ 356 deg. F., 40 plates, 2023
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Alfa-Laval
Year: 2023
ITEM NO : 114590 QTY : 1 ALLOY : A SQ.FT. : 377 MATERIAL (S) : CS FRAME MATERIAL (T) : HASTELLOY C PLATES PSI (S) : 150FV TEMP. DEG. F (S) : 356 TUBE HOLES : 40 PLATES TUBE WALL : 0.6 MM V/H : V CODE : NB SHELL NOZZLES : 2-8" (TI-CONNECTIONS) TUBE NOZZLES : 2-8" (SS-CONNECTIONS) Unused 377.9 sq. ft. plate ...more
Kimball Industries Mono Base - Stand Alone Vibration Isolation Table Model C
LR Environmental Equip Co | Los Angeles, CA
Category: Vibration Testers
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Kimball
Kimball Industries Mono Base - Stand Alone, Vibration Isolation Table Model K4275-2, Designed For X-Y-Z Testing, 41.25" X 36" Lightweight Magnesium Slip Plate, Sold "AS IS" - QUICK DELIVERY, Stock #229L.
Fitzpatrick #DM1.5LX8D, chilsonator roller compactor mill, capable of processing from 35-135 KK (77-297 lbs) of product per hour
Frain Industries | Carol Stream, IL
Category: Chilsonators
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fitzpatrick
Model: DM1.5LX8D
Fitzpatrick, Model DM 1.5L X 8D, Chilsonator roller compactor mill, capable of processing from 35Kg to 135Kg (77 lbs to 297 lbs) of product per hour – depending on materials, application, environment and machine configuration. Stainless steel contact parts. agitated, vertical screw feed product hopper with ...more
JUST ADDED!
301 GPM, 3365 PSI, 600 HP Gardner Denver AJAX #Q600, Quintuplex Plunger Pump Skid, 1991
Savona Equipment | Savona, BC
Category: Piston Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Gardner Denver
Model: Q600
Year: 1991
Gardner Denver AJAX Q600 Plunger Pump Skid, Make: Gardner-Denver AJAX Q600Model: 0600BLYear: 1991Condition: Unused, Installed in Plant as Critical Spare, Never UsedType: Plunger PumpStyle: QuintuplexPlunger: 3in CeramicNumber of Plungers: 5Plunger Load: 21,800 Lbs.Flow Rate: 301 GPM (1,640m³/Day)Discharge Rating: ...more
120 Ton, I.m.i.inland I.M.I. Inland, 15" x20", 9.5" DL, 9" stroke, vert.or horizontal, 12" elec.pltns, #185
Icon Industries, Inc | Grand Rapids, MI
Category: Molding Compression Transfer Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: I.m.i.inland
I.M.I. INLAND MODEL A060 915. SERIAL #165. PRESS CAN BE OPERATED VERTICALLY OR HORIZONTALLY. TWO 12" X 12" X 2 3/8" ELECTRIC PLATENS (CARTRIDGE). 22" MAX. DAYLIGHT. 9 \u00bd" DAYLIGHT WITH TRANSFER POT AND PLATENS INSTALLED. APPROX 9" STROKE ON MAIN CLAMP. APPROX 14" STROKE ON TRANSFER. RATED TO 3000 PSI. OVERALL ...more
Power Disconnect Panel
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
This listing is for a USED industrial electrical control panel housed in a steel enclosure. The panel is an emergency stop pushbutton, rotary disconnect switch, pilot light, audible buzzer, and internal control components including contactors, terminal blocks, fuses, and control relays. This type of panel is typically ...more
Stephan Machinery #VCM40E6GT, Slicer/Cutter 304 Stainless Steel, 12.5" diameter x 7.25" bowls, 1.5" gallon cold trap
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stephan Machinery
Model: VCM40E6GT
40 quart, vertical, bowl chopper / mixer speeds depend on product and mix time. 19 1/2" ID x 12" Deep stainlees steel mixing bowl and top cover, 14" L bottom twin 2 speed chopper / mixing blades, 90 deg tilt, with flip up, bolt down cover and top mounted vacuum pressure gauge, 1/2 low pressure jacketed ...more
Kimball Industries Mono Base - Stand Alone Vibration Isolation Table Model K4275-2
LR Environmental Equip Co | Los Angeles, CA
Category: Vibration Testers
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Kimball
Kimball Industries Mono Base - Stand Alone, Vibration Isolation Table Model K4275-2, Designed For X-Y-Z Testing, 30" X 35.25" Lightweight Magnesium Slip Plate, Sold AS IS - QUICK DELIVERY!, Stock #228L.
90 Ton, Reis #TUS90-OK, hydraulic spotting press, 35.44" x 50.40"capacity
Nationwide Machinery Sales | Troy, MI
Category: Die Tryout and Spotting Presses
Seller: Nationwide Machinery Sales
Location: Troy, MI
Mfr: Reis
Model: TUS90 OK
90 Ton Reis Hydraulic Spotting Press, Model TUS90 OK, - Capacity: 35.44" x 50.40", - Working capacity (floor plate size): 47.25" x 35.44", - Column distance: 36.62", - Max. distance between plates: 40.75", - Max weight on lower plate: 15,432 lbs., - Max weight on upper plate: 7,716 lbs., - Max. closing strength: 40kN ...more
JUST ADDED!
SCMI #K130, Edgebander, 29.5 FPM, 8-50mm panel, 0.4-3mm thick, 2010
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scmi
Model: K130
Year: 2010
SCMI K130 Edgebander, Includes: Cincinnati Blower, Manufacturer (to be confirmed):, 0.4-3mm Capable, 9m/min Feeding Speed, Hot Melt Glue Pot, Twin End Trim Saws, Top & Bottom Trimming, Radius Scraping Station, Buffing Station, Compact Italian Hot Melt Edgebander, Perfect For Small Operations, Panel Thickness; 8 - ...more
Tonazzi Vasqauli Millennium #MILL.200, Tube Filler, 200 TPM, dual station, 3-350 mL, w/ change parts, Roboplacer, magazine, 2008
Federal Equipment Company | Cleveland, OH
Category: Tube Filler Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: MILL.200
Year: 2008
Used Tonazzi Vasqauli Millennium Tube Filler, model MILL.200, speeds up to 200 tubes/minute depending on fill size, dual filling stations, with fill capacity from 3 - 350 mL, tube size range: 10-50 mm diameter for plastic and laminate tubes, 10-40 mm diameter for Aluminum tubes, 50-250 mm tube height with cap. ...more
No. TF20 MEC, Wire Spring Coiler, .078" wire diameter, 1.57" coil diameter, 78" feed, L-R coiling, Double diameter & pitch, 2 Plane Straightener
National Machinery Exchange | Newark, NJ
Category: Wire Spring Coilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mec
Model: TF20
Wire Diameter.6 - 2.0 mm (.023" -.078"), Coil Diameter Max 40 mm (1.57"), Feed Length Max. 2,000 mm normally (78"), Max 4,000 mm available with cycle gear (157"), Motor 3.7 KW Inverter Motor, Production Speed 10 - 200 pcs/min, Weight 740 kg (1650 lbs.), Left and Right Hand Coiling, Double Diameter, Double Pitch ...more
339 sq.ft., APV, SR9-M12, Carbon Steel frame, plates 0.6mm thick plates, paraflow type, 2008
Louisiana Chemical Equip Co | Baton Rouge, LA
Category: Plate and Frame Heat Exchangers
Seller: Louisiana Chemical Equip Co
Location: Baton Rouge, LA
Mfr: Apv
Year: 2008
ITEM NO : 102699 QTY : 1 ALLOY : A SQ.FT. : 339 MATERIAL (S) : CS FRAME MATERIAL (T) : TITANIUM GR.1 PLATES PSI (S) : 88FV PSI (T) : 88FV TEMP. DEG. F (S) : 320 TEMP. DEG. F (T) : 320 TUBE HOLES : 69 PLATES V/H : V CODE : NB SHELL NOZZLES : (2)8" TUBE NOZZLES : (2)8" UNUSED; MFG. BY APV IN 2008; MODEL ...more
13" x 18" Hyd-Mech #S20A, automatic scissor hoiz pivot bandsaw, 1" x 14' 10" blade, 75-330 SFM, 5 HP, 12 gallon coolant
Greenway & Associates Ltd | Orange City, IA
Category: Horizontal Band Saws
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Hyd-Mech
Model: S20A
, Easy swing, heavy duty, cast iron saw head that can swing up to 60 in one direction, Cast iron shuttle s automatic multi-indexing up to 27 in a single stroke. Powered by ball screw and stepper motor., 5 HP VFD. True direct blade drive-no belts/pulleys, On-demand hydraulics, Blade chamber separates material from cut ...more
1-1/4" Eagle #EPT40DR, CNC tube bender, 1-1/4" OD x .140" wall, 180° +springback, counter clock wise
AM Industrial | Brook Park, OH
Category: CNC Bar, Pipe and Tube Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Eagle
Model: EPT40DR
Product, Stock Number AM18025 Brand Eagle Capacity 1.25 inches, 1.25″ Eagle #EPT-40DR 3-Axis CNC horizontal mandrel type tube bending machine, Tube capacity: 1.25″ OD x 0.14″ WT (mild steel)Maximum centerline radius: 11″Maximum rotation: 180 degrees + springbackMaximum tube length over mandrel: ...more
6" x 6" x 1/2" Sunrise #IW-110SD, hydraulic ironworker, 110 ton, 10 HP, 20" throat, new, in stock
JPS International Inc | Lake Forest, CA
Category: Ironworkers
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Sunrise
Model: IW-110SD
EquipmentIronworkerSunrise IW-110SD Hydraulic IronworkerSunrise IW-110SD Hydraulic IronworkerHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionNewQuantityRequest QuoteLoading.NewHave one to sell?Sell NowOverviewType:IronworkerManufacturer:SUNRISEModel:IW-110SDCondition:Build To OrderStock ...more
Mikron #GFMS-HPM450U, 60 automatic tool changer, 23.6" X, 17.7" Y, 17.7" Z, 20000 RPM, 5-Axis, iTNC530,2013
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Mikron
Model: GFMS-HPM450U
Year: 2013
5-AXIS MACHINING CENTERS MIKRON HPM 450U SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: ONE USED 2013 MIKRON GFMS-HPM 450U 5-AXIS AUTOMATED MACHINING CENTER: Machine made in Nidau, Switzerland, inspect under power on our floor in WI -CONTROL- Heidenhain iTNC 530 with ...more
72" x 102" Amerio, Spare Plates for Amerio Plate Freezer, 9 Galvanized Steel Plates
Genemco | Hearne, TX
Category: Freezers & Plate Chillers
Seller: Genemco
Location: Hearne, TX
Mfr: Amerio
(9) Spare Plates for Amerio Plate Freezer. 72 inches x 102 inches. Galvanized steel.
Single Stage Homogenizer, (2) 3/4" diameter Plungers, 5000 psi, 3 HP, 1160 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Homogenizers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Single Stage Homogenizer - Stainless steel with two 3/4" plungers and a 3 HP, 230/460V, 1160 RPM motor. Designed for a working pressure of up to 5000 PSI. Missing nameplate., Basis: FOB, Maximum Pressure: 5,000 PSI.
Evoqua Water Technologies, RO/DI Water System, 60 HP, skid mount
Federal Equipment Company | Cleveland, OH
Category: Reverse Osmosis Systems
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Evoqua Water Technologies
Used Evoqua Water Technologies RO/DI Water System, with (6) tube RO system, prefilter, 60 hp Grundfos pump, skid mounted with RIO Panel and power distribution panel, CDI continuous electrodeionization unit, (6) IonPure LX units, Carbon Tower bed, main control panel with HMI, serial# 10262039, built 2023.
SWF #BF400VK, automatic, 3-piece bliss case former and hot melt glue sealer rated from 12-35 cases per minute
Frain Industries | Carol Stream, IL
Category: Case Erectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Swf
Model: BF400VK
SWF Model BF 400VK, Automatic, 3-piece bliss case former and hot melt glue sealer. Rated from 12 to 35 cases per minute – depending on material, application and machine configuration. Bliss case size range: 9¼" to 32½" in Length; 9" to 18" in Width; 4" to 16" in ...more
20 Ton, Bruderer #BSTA200-60, high performance stamping press, 590x426mm bolster, 100-2000 SPM, 2021
Wiegel Machinery | Wood Dale, IL
Category: High Speed and Automatic Presses
Seller: Wiegel Machinery
Location: Wood Dale, IL
Mfr: Bruderer
Model: BSTA200-60
Year: 2021
High-Performance Stamping Press – Model BSTA 200-60, Press Force: 200 kN Speed Range: ▪ Adjustable stroke option: 100 – 2,000 spm, Bolster Plate Dimensions: 590 x 426 mm Design: Modular construction for flexibility and simplified maintenance Mass Balancing System: Perfected for high-speed, low-vibration ...more
768 sq.ft., Tarmac Int. Inc., 48-30DPL48-0.625-IU, heat exchanger
Aaron Equipment Co | Schaumburg, IL
Category: Plate and Frame Heat Exchangers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Tarmac Int. Inc
unused- tarmac int. inc heat exchanger, (never set up on the hot side). model 48-30dpl48-0.625-iu. 768 sqft. stainless steel. size: 48"*48"*54.25, cfm: 8100 cfm. material: high temperature sst, surface area: 768 ft square. total heat transfer rate: 1.8 mmbtu/hour. type: plate/plate heat exchanger. max temp hot gas ...more
30" Polypropylene Plates & Frames, 4-Eye Closed Delivery, (48) 1" thick Plates, (48) 2" thick Frames, 504 sq.ft. Filtration Area, 42 cu.ft. Cake capacity
Perry Videx LLC | Hainesport, NJ
Category: Plate and Frame Filter Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 30" X 30" polypropylene plates and frames. 4 eye, closed delivery. (48) 2" thick frames and (48) 1" thick plates. Approximately 504 square foot filtration area, 42 cubic foot cake capacity., _UNKNOWN_ 30" X 30".
300 Ton, LMG (Lawton Machinery Group) hot & cold molding press, 10 stroke, 30" x 30" platens, 2016
Kempler Machinery | Elk Grove Village, IL
Category: Molding Compression Hydraulic Presses
Seller: Kempler Machinery
Location: Elk Grove Village, IL
Mfr: Lmg
Year: 2016
300 Ton LMG (Lawton Machinery Group), 30" x 30" platens, one electrically heated platen press, one water cooled press, both presses have own power unit for full tonnage, 6 opening, 10" stroke, 7" daylight each opening, NEW in 2016, #89556., 2016 LMG 300 Ton, Tonnage. 300 T, Heating Element. Electric, # of Openings. 6 ...more
78-3/4" x 70-7/8" Union #Ti1800, sliding rotary table, pendant Control, 360°CW & counter clock wise, 1980
Hildebrand Machinery Co Inc | York, PA
Category: Rotary Tables
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Union
Model: TI1800
Year: 1980
UNION SLIDING ROTARY TABLE, PRICE: Loaded on Truck, Our Warehouse, York, PA …… $29,500.00, Stock # 14149, Serial # 1031, Model # Ti1800, New Date: 1980, Table Size: 78-3/4" x 70-7/8" with (11) 1-1/16" T-Slots on, 6-1/4" Centers Running the 78" Length, Table Travel on Base: 49", 360° Clockwise & ...more
.472" x 4.72" Nakashimada #NP-100, 2-Die 3-Blow Transfer Header, 40-120 pieces/min., 2-plane wire straightener, exit conveyor, 1994
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: NP-100
Year: 1994
Cutoff Diameter 12mm Cutoff Length 120mm 1st Die KO 160mm 2nd Die KO 100mm 1st PKO Kickout 20mm 2nd PKO Kickout 35mm 3rd PKO Kickout 15mm Pieces Per Minute 40 - 120 Weight 15000 Kg, Brankamp Mode ECO 600 process monitor, 2 Plane wire straightener, Exit conveyor, Stripper on 2nd Die.
146.04 sq.ft. Tranter Superchanger #GLD-013-H-5-NR-108, heat exchanger
American Industrial Sales LLC | Berlin, WI
Category: Heat Exchangers - Miscellaneous
Seller: American Industrial Sales LLC
Location: Berlin, WI
Mfr: Tranter
Tranter Superchanger Heat Exchanger, Model# GLD-013-H-5-NR-108, Surface Area: 146.04 sq ft., Plate Pack Dims: 14.02 Min, 14.89 Max, Test Press (PSIG): 195, MDMT: -20 F @ 150 PSI, MAWP: 150 PSI @ 350 deg, *Shipping available - Will load on a truck, **We have around 50 heat exchangers in stock. Inquire for more ...more
Felder #G-330, edgebander, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Felder
Model: G-330
Year: 2013
FELDER - G-330: Edgebander0.4 - 3 mm Edge thickness cap.; 40 mm panel thickness; 3" min. width; 4-3/4" min. panel length.: -- Quickmelt TEFLON coated glue pot for granular hot-melt adhesive. -- Heavy-Duty Guillotine: Up to 3 mm thick PVC. -- Integrated Operator PLC controls and an LCD display. -- "Anti-slip" ...more
60" Speedfam #64BSW, lapping machine, 22" inside ring diameter, 45 RPM, 6" cylindrer diameter, 1999
Blumberg Machinery Co | Bannockburn, IL
Category: Lappers Lapping Machines
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Speedfam
Model: 64BSW
Year: 1999
60" SPEEDFAM 64BSW LAPPING MACHINE, New 1999, Note: This machine is Copper Lapping Plate to perform lapping functions on Ceramics., Plate Diameter: 60"Inside Ring Diameter: 22"Total Ring Area: 1810 Sq. InchesPlate Speed, Approximately: 45 RPMDiameter Of Cylinders: 6"Down Pressure Per Head: 1900 Lbs.15 HP Main Drive ...more
12" Ertel, Filter Press, brass plates, (5) 5/16" thick plates, (2) 1" thick frames, two-eye delivery filter, manual screw closure
Machinery & Equipment Co | Brisbane, CA
Category: Plate and Frame Filter Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ertel
Ertel Filter Press, Brass Construction - 12" diameter, with five plates (5/16" thick) and two frames (1" thick). s two-eye delivery and manual screw closure. Mounted on base with casters., Dimensions: 12" Diameter, Materials of Construction: Brass Plates, Basis: FOB, Number of Plates: 5, Number of Frames: 2.
Matrix #Morpheus-1215SR3, Continuous Motion VFFS, 190 BPM, Washdown Bagger w/ Yamato 14-Head Bucket Scale, 2.75-12" width x 2-15" L bags
Aaron Equipment Co | Schaumburg, IL
Category: Form Fill Sealing Machines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Matrix
Model: MORPHEUS-1215SR3
used- matrix packaging morpheus model mvc-300 continuous motion vertical form fill seal with yamato model adw-0-0114s combination scale. capable of speeds up to 190 bags per minute (depending on application). bag size range: 2.75" - 12" (width) x 2" - 15" (length). currently set up with 13" wide seal jaws. max roll ...more
1/ 8" x 8" x 8" Amada #CSW-220, hydraulic dual head corner notcher & coper
TNT Industrial | Orange, CA
Category: Notching Machines
Seller: TNT Industrial
Location: Orange, CA
Mfr: Amada
Model: CSW-220
8" X 8" X 1/8" AMADA MODEL #CSW-220 DUAL HEAD CORNER NOTCHER & COPER: NEW BLADES~~. COPER TABLE. MAXIMUM PLATE THICKNESS. 1/8". FOOT PEDAL. RATED CAPACITY. 10 TON..
24" Mereen-Johnson #424-DCS, Gang Rip Saw, 14" diameter Tooling, 3.5" max thickness, 6" throat, 30-170 FPM, 75 HP, 3600 RPM, 575 V
Ex-Factory | Charlotte, NC
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mereen-Johnson
Model: 424-DCS
Mereen-Johnson 424 Gang Rip saw -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 14" min. length for glue joint accuracy and 22" min. for busting only, -- 6" throat. and s: -- 75 HP - 3,600 RPM TEFC Direct drive motor, -- 2-3/16" dia. arbor with disc brake, -- Load meter and ...more
JUST ADDED!
Pallet Racking Uprights, Tear Drop, 96" x 32", 4-1/2" x 3" plate
HGR24 | Euclid, OH
Category: Pallet Racks
Seller: HGR24
Location: Euclid, OH
Inventory No. 0326-130-0002 Model No. TEAR DROP Name Pallet Racking Uprights Arrival Date 05-01-2026 Dimensions L x W x H (inches) Unavailable Capacity 36" x 96" Weight (lb.) 920 Category Material Handling Condition Used Available Quantity 1 Item 4 1/2” X 3” Plate, Q-22.
50 Ton, Precision Plate, 12" x18" elec.platens, 2" daylight & stroke, roll-out table, 3 HP, #2333
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Precision
PRECISION-PLATE (SERIAL #1894) BY ANDERSON-VREELAND. 12" X 18" X 1.5" ELECTRIC PLATENS WITH STRIP HEATERS (5 PER PLATEN; 750 WATT). 8" BORE DOUBLE-ACTING CLAMP CYLINDER. APPROX 2" DAYLIGHT AND STROKE. GUIDED ON 1.5" DIAMETER POSTS WITH 2" BUSHINGS. APPROX 41.5" OPERATOR HEIGHT. 13.5" X 18.5" ROLL-OUT TABLE (MANUAL). ...more
JUST ADDED!
Altendorf / Hebrock #K-36, edgebander, 2.4" panel thick, 2024
Machinery Max | Punta Gorda, FL
Category: Woodworking Edgebanders
Seller: Machinery Max
Location: Ft. Worth, TX
Mfr: Altendorf
Model: K-36
Year: 2024
Make, Altendorf/Hebrock, Model, K-36, Serial Number, K4293, Year, 2024, Phase, 3 PHASE, Voltage, 230 VOLT, Estimated Dimensions, 218" L x 48" W x 57" H, Estimated Weight, 4,000 Lbs, Seller Comment, Non Negotiable Load fee includes loading onto buyers flat bed truck, Load Fee, 995.00, Lot Notes, Onsite ...more
1 gallon Ross #DSLDM1, double planetary mixer, jacketed, 100 psi, temperature probe
Frain Industries | Carol Stream, IL
Category: Planetary Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: DSLDM1
1 gallon, double planetary mixer with working capacity of 3/4 gallons (3 liters) & full holding capacity of 1 gallon (3.8 liters). All wetted parts are hastelloy C with #4 finish and external parts 316 S/S. Can with temperature probe, jacket rated at 100 psi designed for full vacuum with three 3" diameter ...more
138 sq.ft. Tranter Superchanger UFX Heat Exchanger
American Industrial Sales LLC | Berlin, WI
Category: Heat Exchangers - Miscellaneous
Seller: American Industrial Sales LLC
Location: Berlin, WI
Mfr: Tranter
Tranter Superchanger Heat Exchanger, Model# UFX-12-5-SP-109, Surface Area: 138 sq ft., Plate Pack Dims: 14.16 Min, 15.03 Max, Test Press (PSIG): 260, MDMT: 47 F @ 200 PSI, MAWP: 200 PSI @ 150 deg, *Shipping available - Will load on a truck, **We have around 50 heat exchangers in stock. Inquire for more information, We ...more
2000 KW Caterpillar #3516B, CAT factory rebuilt, EMCP 4.2 panel, SR5 generator, elec gov, 24v, CAT 12 mo factory warranty
Ring Power Systems | Saint Augustine, FL
Category: Diesel Generators
Seller: Ring Power Systems
Location: Saint Augustine, FL
Mfr: Caterpillar
Model: 3516B
Year: 2024
Available January 2025 New Caterpillar 2000 kW Package Diesel Generator Set, 60 Hertz, New CAT Factory Worldwide Warranty with Factory Reman Model 3516B Engine, LO-BSFC (Best Fuel Economy), Not Emissions Compliant, CAT Premium EMCP 4.2 Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT SR5 ...more
60 Ton, Minster, Pulsar Stamping Press, 1.25" stroke, 11.12" shut height, 36" x 23" bolster, 1.75" adjustment, 1000 SPM
National Machinery Exchange | Newark, NJ
Category: High Speed and Automatic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Minster
CAPACITY. 60 TON, LENGTH OF STROKE. 1.25", SHUT HEIGHT. 9.38" - 11.12", BOLSTER. 36" X 23", ADJUSTMENT. 1.75", RAM PLATE. 36" X 16", S.P.M. 1 - 1000, EST. WEIGHT. 25,000#, O.A. DIMENSIONS. 105" X 54" X 128", MOTOR. 30 HP, 90 VOLTS, 230/460 VOLT 3 PHASE, 78 / 39 AMPS, 1755 RPM (MIN 170, MAX 1680), LUBE SYSTEM, FLOOR ...more
Quick #N-P50-05-12-SL-1PL-M-40-R-2Z, pneumatic w/motorized open, 62" x 146" platen, 146" side, 50 psi @ 90 psi supply, (36) 12.8" diameter air pods w/5.9" stroke, 40" opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: N-P50-05-12-SL-1PL-M-40-R-2Z
Year: 2026
QUICK MACHINERY N-P50 Air Pod style Cold Press. -- Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface.: -- Platen pressing area size: 62" x 146" with side loading on 146" side (also available as end loading). -- 50 PSI Platen pressure over the entire surface area with 90 PSI ...more
